Exploiting the reversible covalent bonding of boronic acids: recognition, sensing, and assembly

Catalytic glycosylation for minimally protected donors and acceptors

Oligosaccharides have myriad functions throughout biological processes1,2. Chemical synthesis of these structurally complex molecules facilitates investigation of their functions. With a dense concentration of stereocentres and hydroxyl groups, oligosaccharide assembly through O-glycosylation requires simultaneous control of site, stereo- and chemoselectivities3,4. Chemists have traditionally relied on protecting group manipulations for this purpose5-8, adding considerable synthetic work. Here we report a glycosylation platform that enables selective coupling between unprotected or minimally protected donor and acceptor sugars, producing 1,2-cis-O-glycosides in a catalyst-controlled, site-selective manner. Radical-based activation9 of allyl glycosyl sulfones forms glycosyl bromides. A designed aminoboronic acid catalyst brings this reactive intermediate close to an acceptor through a network of non-covalent hydrogen bonding and reversible covalent B-O bonding interactions, allowing precise glycosyl transfer. The site of glycosylation can be switched with different aminoboronic acid catalysts by affecting their interaction modes with substrates. The method accommodates a wide range of sugar types, amenable to the preparation of naturally occurring sugar chains and pentasaccharides containing 11 free hydroxyls. Experimental and computational studies provide insights into the origin of selectivity outcomes.

One-Step Synthesis, Crystallography, and Acute Toxicity of Two Boron-Carbohydrate Adducts That Induce Sedation in Mice

Boronic acids form diester bonds with cis-hydroxyl groups in carbohydrates. The formation of these adducts could impair the physical and chemical properties of precursors, even their biological activity. Two carbohydrate derivatives from d-fructose and d-arabinose and phenylboronic acid were synthesized in a straightforward one-step procedure and chemically characterized via spectroscopy and X-ray diffraction crystallography. Additionally, an acute toxicity test was performed to determine their lethal dose 50 (LD50) values by using Lorke's method. Analytical chemistry assays confirmed the formation of adducts by the generation of diester bonds with the β-d-pyranose of carbohydrates, including signals corresponding to the formation of new bonds, such as the stretching of B-O bonds. NMR spectra yielded information about the stereoselectivity in the synthesis reaction: Just one signal was found in the range for the anomeric carbon in the 13C NMR spectra of both adducts. The acute toxicity tests showed that the LD50 value for both compounds was 1265 mg/kg, while the effective dose 50 (ED50) for sedation was 531 mg/kg. However, differences were found in the onset and lapse of sedation. For example, the arabinose derivative induced sedation for more than 48 h at 600 mg/kg, while the fructose derivative induced sedation for less than 6 h at the same dose without the death of the mice. Thus, we report for the first time two boron-containing carbohydrate derivatives inducing sedation after intraperitoneal administration. They are bioactive and highly safe agents. Further biological evaluation is desirable to explore their medical applications.

Scalable Dual In Situ Synthesis of Polyester Nanocomposites for High-Energy Storage

Incorporating ultralow loading of nanoparticles into polymers has realized increases in dielectric constant and breakdown strength for excellent energy storage. However, there are still a series of tough issues to be dealt with, such as organic solvent uses, which face enormous challenges in scalable preparation. Here, a new strategy of dual in situ synthesis is proposed, namely polymerization of polyethylene terephthalate (PET) synchronizes with growth of calcium borate nanoparticles, making polyester nanocomposites from monomers directly. Importantly, this route is free of organic solvents and surface modification of nanoparticles, which is readily accessible to scalable synthesis of polyester nanocomposites. Meanwhile, uniform dispersion of as ultralow as 0.1 wt% nanoparticles and intense bonding at interfaces have been observed. Furthermore, the PET-based nanocomposite displays obvious increases in both dielectric constant and breakdown strength as compared to the neat PET. Its maximum discharged energy density reaches 15 J cm-3 at 690 MV m-1 and power density attains 218 MW cm-3 under 150 Ω resistance at 300 MV m-1, which is far superior to the current dielectric polymers that can be produced at large scales. This work presents a scalable, safe, low-cost, and environment-friendly route toward polymer nanocomposites with superior capacitive performance.

Molecular two-point recognition of fructosyl valine and fructosyl glycyl histidine in water by fluorescent Zn(II)-terpyridine complexes bearing boronic acids

Selective recognition of fructosyl amino acids in water by arylboronic acid-based receptors is a central field of modern supramolecular chemistry that impacts biological and medicinal chemistry. Fructosyl valine (FV) and fructosyl glycyl histidine (FGH) occur as N-terminal moieties of human glycated hemoglobin; therefore, the molecular design of biomimetic receptors is an attractive, but very challenging goal. Herein, we report three novel cationic Zn-terpyridine complexes bearing a fluorescent N-quinolinium nucleus covalently linked to three different isomers of strongly acidified phenylboronic acids (ortho-, 2Zn; meta-, 3Zn and para-, 4Zn) for the optical recognition of FV, FGH and comparative analytes (D-fructose, Gly, Val and His) in pure water at physiological pH. The complexes were designed to act as fluorescent receptors using a cooperative action of boric acid and a metal chelate. Complex 3Zn was found to display the most acidic -B(OH)2 group (pKa = 6.98) and exceptionally tight affinity for FV (K = 1.43 × 105 M-1) with a strong quenching analytical response in the micromolar concentration range. The addition of fructose and the other amino acids only induced moderate optical changes. On the basis of several spectroscopic tools (1H, 11B NMR, UV-Vis, and fluorescence titrations), ESI mass spectrometry, X-ray crystal structure, and DFT calculations, the interaction mode between 3Zn and FV is proposed in a 1 : 1 model through a cooperative two-point recognition involving a sp3 boronate-diol esterification with simultaneous coordination bonding of the carboxylate group of Val to the Zn atom. Fluorescence quenching is attributed to a static complexation photoinduced electron transfer mechanism as evidenced by lifetime experiments. The addition of FGH to 3Zn notably enhanced its emission intensity with micromolar affinity, but with a lower apparent binding constant than that observed for FV. FGH interacts with 3Zn through boronate-diol complexation and coordination of the imidazole ring of His. DFT-optimized structures of complexes 3Zn-FV and 3Zn-FGH show a picture of binding which shows that the Zn-complex has a suitable (B⋯Zn) distance to the two-point recognition with these analytes. Molecular recognition of fructosyl amino acids by transition-metal-based receptors has not been explored until now.

Dinuclear gold-catalyzed divergent dechlorinative radical borylation of gem-dichloroalkanes

The enormous and widespread use of organoboronic acids has prompted the development of innovative synthetic methodologies to meet the demands on structural diversity and functional group tolerance. The existing photoinduced defunctionalization radical borylation, typically focused on the conversion of one C-X bond (X= Br, I, or other leaving group) into only one C-B bond. Herein, we disclose a divergent radical dechloroborylation reaction enabled by dinuclear gold catalysis with visible light irradiation. A wide range of structurally diverse alkyl boronic, α-chloroboronic, and gem-diboronic esters can be synthesized in moderate to good yields (up to 92%). Its synthetic robustness is further demonstrated on a preparative scale and applied to late-stage diversification of complex molecules. The process hinges on a C-Cl bond relay activation in readily available gem-dichloroalkanes through inner-sphere electron transfer, overcoming the redox potential limits of unreactive alkyl chlorides.

Advancing Glucose Sensing Through Auto-Fluorescent Polymer Brushes: From Surface Design to Nano-Arrays

Designing smart (bio)interfaces with the capability to sense and react to changes in local environments offers intriguing possibilities for new surface-based sensing devices and technologies. Polymer brushes make ideal materials to design such adaptive and responsive interfaces given their large variety of functional and structural possibilities as well as their outstanding abilities to respond to physical, chemical, and biological stimuli. Herein, a practical sensory interface for glucose detection based on auto-fluorescent polymer brushes decorated with phenylboronic acid (PBA) receptors is presented. The glucose-responsive luminescent surfaces, which are capable of translating conformational transitions triggered by pH variations and binding events into fluorescent readouts without the need for fluorescent dyes, are grown from both nanopatterned and non-patterned substrates. Two-photon laser scanning confocal microscopy and atomic force microscopy (AFM) analyses reveal the relationship between the brush conformation and glucose concentration and confirm that the phenylboronic acid functionalized brushes can bind glucose over a range of physiologically relevant concentrations in a reversible manner. The combination of auto-fluorescent polymer brushes with synthetic receptors presents a promising avenue for designing innovative and robust sensing systems, which are essential for various biomedical applications, among other uses.

Enantioselective α-Boryl Carbene Transformations

Carbenes, recognized as potent intermediates, enable unique chemical transformations, and organoborons are pivotal in diverse chemical applications. As a hybrid of carbene and the boryl group, α-boryl carbenes are promising intermediates for the construction of organoborons; unfortunately, such carbenes are hard to access and have low structural diversity with their asymmetric transformations largely uncharted. In this research, we utilized boryl cyclopropenes as precursors for the swift synthesis of α-boryl metal carbenes, a powerful category of intermediates for chiral organoboron synthesis. These α-boryl carbenes undergo a series of highly enantioselective transfer reactions, including B-H and Si-H insertion, cyclopropanation, and cyclopropanation/Cope rearrangement, catalyzed by a singular chiral copper complex. This approach opens paths to previously unattainable but easily transformable chiral organoborons, expanding both carbene and organoboron chemistry.

Enrichment methods of N-linked glycopeptides from human serum or plasma: A mini-review

Human diseases often correlate with changes in protein glycosylation, which can be observed in serum or plasma samples. N-glycosylation, the most common form, can provide potential biomarkers for disease prognosis and diagnosis. However, glycoproteins constitute a relatively small proportion of the total proteins in human serum and plasma compared to the non-glycosylated protein albumin, which constitutes the majority. The detection of microheterogeneity and low glycan abundance presents a challenge. Mass spectrometry facilitates glycoproteomics research, yet it faces challenges due to interference from abundant plasma proteins. Therefore, methods have emerged to enrich N-glycans and N-linked glycopeptides using glycan affinity, chemical properties, stationary phase chemical coupling, bioorthogonal techniques, and other alternatives. This review focuses on N-glycans and N-glycopeptides enrichment in human serum or plasma, emphasizing methods and applications. Although not exhaustive, it aims to elucidate principles and showcase the utility and limitations of glycoproteome characterization.

Pyrene-Appended Boronic Acids on Graphene Foam Electrodes Provide Quantum Capacitance-Based Molecular Sensors for Lactate

Molecular recognition and sensing can be coupled to interfacial capacitance changes on graphene foam surfaces linked to double layer effects and coupled to enhanced quantum capacitance. 3D graphene foam film electrodes (Gii-Sens; thickness approximately 40 μm; roughness factor approximately 100) immersed in aqueous buffer media exhibit an order of magnitude jump in electrochemical capacitance upon adsorption of a charged molecular receptor based on pyrene-appended boronic acids (here, 4-borono-1-(pyren-2-ylmethyl)pyridin-1-ium bromide, or abbreviated T1). This pyrene-appended pyridinium boronic acid receptor is employed here as a molecular receptor for lactate. In the presence of lactate and at pH 4.0 (after pH optimization), the electrochemical capacitance (determined by impedance spectroscopy) doubles again. Lactic acid binding is expressed with a Hillian binding constant (Klactate = 75 mol-1 dm3 and α = 0.8 in aqueous buffer, Klactate = 460 mol-1 dm3 and α = 0.8 in artificial sweat, and Klactate = 340 mol-1 dm3 and α = 0.65 in human serum). The result is a selective molecular probe response for lactic acid with LoD = 1.3, 1.4, and 1.8 mM in aqueous buffer media (pH 4.0), in artificial sweat (adjusted to pH 4.7), and in human serum (pH adjusted to 4.0), respectively. The role of the pyrene-appended boronic acid is discussed based on the double layer structure and quantum capacitance changes. In the future, this new type of molecular capacitance sensor could provide selective enzyme-free analysis without analyte consumption for a wider range of analytes and complex environments.

Ratiometric Imaging of Catecholamine Neurotransmitters with Nanosensors

Neurotransmitters are important signaling molecules in the brain and are relevant in many diseases. Measuring them with high spatial and temporal resolutions in biological systems is challenging. Here, we develop a ratiometric fluorescent sensor/probe for catecholamine neurotransmitters on the basis of near-infrared (NIR) semiconducting single wall carbon nanotubes (SWCNTs). Phenylboronic acid (PBA)-based quantum defects are incorporated into them to interact selectively with catechol moieties. These PBA-SWCNTs are further modified with poly(ethylene glycol) phospholipids (PEG-PL) for biocompatibility. Catecholamines, including dopamine, do not affect the intrinsic E11 fluorescence (990 nm) of these (PEG-PL-PBA-SWCNT) sensors. In contrast, the defect-related E11* emission (1130 nm) decreases by up to 35%. Furthermore, this dual functionalization allows tuning selectivity by changing the charge of the PEG polymer. These sensors are not taken up by cells, which is beneficial for extracellular imaging, and they are functional in brain slices. In summary, we use dual functionalization of SWCNTs to create a ratiometric biosensor for dopamine.

Stimuli-Responsive Boronate Formation to Control Nucleic Acid-Based Functional Architectures

Boronate esters, formed by the reaction of an oligonucleotide bearing a 5'-boronic acid moiety with the 3'-terminal cis-diol of another oligonucleotide, support the assembly of functional nucleic acid architectures. Reversible formation of boronate esters occurs in templated fashion and has been shown to restore the activity of split DNA and RNA enzymes as well as a split fluorescent light-up aptamer. Apart from their suitability for the design and application of split nucleic acid enzymes and aptamers in the field of biosensing, boronate esters may have played an important role in early life as surrogates of the natural phosphodiester bond. Their formation is reversible and thus fulfills an important requirement for biological self-assembly. Here we discuss the general concept of stimuli-dependent boronate formation and its application in biomolecules with implications for future research.

Metal-Free 1,3-Boronate Rearrangement to Ketones Driven by Visible Light

Boronate rearrangements, such as the Matteson and Petasis reactions, are valuable metal-free reactions for the transfer of the carbo group on boron to intramolecular electrophilic sites. However, only highly reactive electrophiles are suitable, and ketones are too inactive for those boronate rearrangements due to the high energy barriers. We disclose here the 1,3-boronate rearrangement to ketones, for which a high energy barrier (44.9 kcal/mol) is prohibitory for thermal reactions in the ground state. The reaction is enabled by the key keto-enol-boronate bidentate complex formation in situ, which absorbs visible light to reach the excited state for the chemoselective 1,3-boronate rearrangement to ketones. Experimental and computational investigations exclude free radical intermediates from organoboronates. The aryl, alkenyl, and alkyl boronic acids react with various 1,3-diketones driven by visible light irradiation to construct structurally diverse β-keto tertiary alcohols under metal-free conditions. The reaction demonstrates substrate diversity with 58 examples, yields up to 98 %, and it is suitable for gram-scale synthesis.

Synthetically encoded complementary oligomers

Creating the next generation of advanced materials will require controlling molecular architecture to a degree typically achieved only in biopolymers. Sequence-defined polymers take inspiration from biology by using chain length and monomer sequence as handles for tuning structure and function. These sequence-defined polymers can assemble into discrete structures, such as molecular duplexes, via reversible interactions between functional groups. Selectivity can be attained by tuning the monomer sequence, thereby creating the need for chemical platforms that can produce sequence-defined polymers at scale. Developing sequence-defined polymers that are specific for their complementary sequence and achieve their desired binding strengths is critical for producing increasingly complex structures for new functional materials. In this Review Article, we discuss synthetic platforms that produce sequence-defined, duplex-forming oligomers of varying length, strength and association mode, and highlight several analytical techniques used to characterize their hybridization.

Fluorescent naphthalimide boronates as theranostics: structural investigations, confocal fluorescence and multiphoton fluorescence lifetime imaging microscopy in living cells

New design and synthetic strategies were developed to generate functional phenyl boronic acid (BA)-based fluorescent probes incorporating the 1,8-naphthalimide (NI) tag. This fluorescent core was anchored onto the BA unit through small organic linkers consisting of nitrogen groups which can arrest, and internally stabilise the phenyl-boronate units. The newly synthesised fluorophores were characterised spectroscopically by NMR spectroscopy and mass spectrometry and evaluated for their ability to bind to a naturally occurring polysaccharide, β-d-glucan in DMSO and simultaneously as act as in vitro cell imaging reagents. The uptake of these new NI-boronic acid derivatives was studied living cancer cells (HeLa, PC-3) in the presence, and absence, of β-d-glucan. Time-correlated single-photon counting (TCSPC) of DMSO solutions and two-photon fluorescence-lifetime imaging microscopy (FLIM) techniques allowed an insight into the probes' interaction with their environment. Their cellular uptake and distributions were imaged using laser scanning confocal fluorescence microscopy under single- and two-photon excitation regimes (λmax 910 nm). FLIM facilitated the estimation of the impact of the probe's cellular surroundings using the fluorophore lifetime. The extent to which this was mediated by the β-d-glucan was visualised by 2-photon FLIM in living cells. The fluorescence lifetime observed under a range of temperatures varied appreciably, indicating that changes in the environment can be sensed by these probes. In all cases, the cellular membrane penetration of these new probes was remarkable even under variable temperature conditions and localisation was widely concentrated in the cellular cytoplasm, without specific organelle trapping: we conclude that these new probes show promise for cellular imaging in living cancer cells.

Synthesis of α-Seleno Boronates via Diboration of Carbonyl Compounds

A method has been described for accessing α-seleno alkyl boronates. The selenoboration was achieved via the diboration of carbonyl compounds to give α-oxyl boronates, which then undergo 1,2-metalate rearrangement in the presence of lithium selenolates and trifluoroacetic anhydride (TFAA). A variety of structurally diverse substrates were compatible with this protocol and efficiently provides difunctionalized products from simple starting materials. The presence of the boronic ester in the resulting organoselenium compounds serves as a versatile synthetic handle for various functionalizations. Mechanistic studies revealed that the binding of selenium nucleophile to both the boron centers in α-oxyl boronate esters.

Dual reactivity based dynamic covalent chemistry: mechanisms and applications

Dynamic covalent chemistry (DCC) focuses on the reversible formation, breakage, and exchange of covalent bonds and assemblies, setting a bridge between irreversible organic synthesis and supramolecular chemistry and finding wide utility. In order to enhance structural and functional diversity and complexity, different types of dynamic covalent reactions (DCRs) are placed in one vessel, encompassing orthogonal DCC without crosstalk and communicating DCC with a shared reactive functional group. As a means of adding tautomers, widespread in chemistry, to interconnected DCRs and combining the features of orthogonal and communicating DCRs, a concept of dual reactivity based DCC and underlying structural and mechanistic insights are summarized. The manipulation of the distinct reactivity of structurally diverse ring-chain tautomers allows selective activation and switching of reaction pathways and corresponding DCRs (C-N, C-O, and C-S) and assemblies. The coupling with photoswitches further enables light-mediated formation and scission of multiple types of reversible covalent bonds. To showcase the capability of dual reactivity based DCC, the versatile applications in dynamic polymers and luminescent materials are presented, paving the way for future functionalization studies.

Solute Stabilization Effects of Nanoparticles Containing Boronic Acids in the Absence of Binding Pairs

Boronic acids are widely used in materials science because of their ability to reversibly bind with diol and catechol moieties through dynamic covalent interactions in a pH- and oxidative-dependent manner. Considerably fewer studies focus on property modulation of boronic acid-based materials in the absence of a biding pair. Herein, we discuss the effects of the boronic acid-containing polymer block length on solute release kinetics from nanoparticles in a stimuli-responsive manner for on-demand delivery. In this study, ABC-type linear amphiphiles of poly(d,l-lactide) and poly(2-methacryloyloxyethyl phosphorylcholine) containing a middle block functionalized with 3-aminophenylboronic acid were synthesized by a combination of ring-opening and controlled free radical polymerizations. Nile red-loaded nanoparticles were self-assembled using a multi-inlet vortex mixer in a well-controlled manner. Release was evaluated at pH above and below the pKa of the boronic acid and in the presence of hydrogen peroxide. Our results show that release kinetics from nanoparticles incorporating a boronic acid-functionalized interlayer were slower than those without it, and the rate could be modulated according to pH and oxidative conditions. These effects can be attributed to several factors, including the hydrophobicity of the boronic acid block as well as hydrogen bonding interactions existing between locally confined boronic acids. While boronic acids are generally utilized as boronic/boronate esters, their stabilizing effects in the absence of appropriate binding pairs are relevant and should be considered in the design of boronic acid-based technologies.

Water-soluble fluorescent chemosensor for sorbitol based on a dicationic diboronic receptor. Crystal structure and spectroscopic studies

Selective recognition of saccharides by phenylboronic dyes capable of functioning in aqueous conditions is a central topic of modern supramolecular chemistry that impacts analytical sciences and biological chemistry. Herein, a new dicationic diboronic acid structure 11 was synthesized, structurally described by single-crystal X-ray diffraction, and studied in-depth as fluorescent receptor for six saccharides in pure water at pH = 7.4. This dicationic receptor 11 has been designed particularly to respond to sorbitol and involves two convergent and strongly acidified phenyl boronic acids, with a pKa of 6.6, that operate as binding sites. The addition of sorbitol in the micromolar concentration range to receptor 11 induces strong fluorescence change, but in the presence of fructose, mannitol, glucose, lactose and sucrose, only moderate optical changes are observed. This change in emission is attributed to a static complexation photoinduced electron transfer mechanism as evidenced by lifetime experiments and different spectroscopic tools. The diboronic receptor has a high affinity/selectivity to sorbitol (K = 31 800 M-1) over other saccharides including common interfering species such as mannitol and fructose. The results based on 1H, 11B NMR spectroscopy, high-resolution mass spectrometry and density functional theory calculations, support that sorbitol is efficiently bound to 11 in a 1 : 1 mode involving a chelating diboronate-sorbitol complexation. Since the experimental B⋯B distance (5.3 Å) in 11 is very close to the calculated distance from the DFT-optimized complex with sorbitol, the efficient binding is attributed to strong acidification and preorganization of boronic acids. These results highlight the usefulness of a new diboronic acid receptor with a strong ability for fluorescent recognition of sorbitol in physiological conditions.

Glucose-Responsive Fibrin Hydrogel-Based Multimodal Nucleic Acid Delivery System

Nucleic acid therapy has emerged as a potential alternative for promoting wound healing by gene expression modification. On the other hand, protecting the nucleic acid payload from degradation, efficient bioresponsive delivery and effective transfection into cells remain challenging. A glucose-responsive gene delivery system for treating diabetic wounds would be advantageous as it would be responsive to the underlying pathology giving a regulated payload delivery with fewer side effects. Herein a GOx-based glucose-responsive delivery system is designed based on fibrin-coated polymeric microcapsules (FCPMC) using the layer-by-layer (LbL) approach that simultaneously delivers two nucleic acids in diabetic wounds. The designed FCPMC displays an ability to effectively load many nucleic acids in polyplexes and release it over a prolonged period with no cytotoxic effects seen in in vitro studies. Furthermore, the developed system does not show any undesired effects in vivo. When applied to wounds in genetically diabetic db/db mice, the fabricated system on its own improves reepithelialization and angiogenesis while decreasing inflammation. Also, key proteins involved in the wound healing process, i.e., Actn2, MYBPC1, and desmin, are upregulated in the glucose-responsive fibrin hydrogel (GRFHG) treated group of animals. In conclusion, the fabricated hydrogel promotes wound healing. Furthermore, the system may be encapsulated with various therapeutic nucleic acids that aid wound healing.

Streptavidin-Conjugated DNA for the Boronate Affinity-Based Detection of Poly(ADP-Ribose) Polymerase-1 with Improved Sensitivity

This work reports the development of a fluorescence method for the detection of poly(ADP-ribose) polymerase-1 (PARP1), in which a phenylboronic acid-modified fluorescein isothiocyanate dye (FITC-PBA) was used to recognize the formed poly(ADP-ribose) (PAR) polymer. The detection system was designed by conjugating recombinant streptavidin (rSA) with PARP1-specific double-stranded DNA (dsDNA) through streptavidin-biotin interaction. Capture of PARP1 via rSA-biotin-dsDNA allowed for the poly-ADP-ribosylation (PARylation) of both rSA and PARP1 in a homogeneous solution. The resulting rSA-biotin-dsDNA/PAR conjugates were then captured and separated via the commercialized nitrilotriacetic acid-nickel ion-modified magnetic bead (MB-NTA-Ni) through the interaction between NTA-Ni on MB surface and oligohistidine (His₆) tag in rSA. The PAR polymer could capture the dye of FITC-PBA through the borate ester interaction between the boronic acid moiety in PBA and the cis-diol group in ribose, thus causing a decrease in fluorescence signal. The PARylation of streptavidin and the influence of steric hindrance on PARylation efficiency were confirmed using reasonable detection strategies. The method showed a wide linear range (0.01~20 U) and a low detection limit (0.01 U). This work should be valuable for the development of novel biosensors for the detection of poly(ADP-ribose) polymerases and diol-containing species.

Artificial-enzymes-armed Bifidobacterium longum probiotics for alleviating intestinal inflammation and microbiota dysbiosis

Inflammatory bowel disease can be caused by the dysfunction of the intestinal mucosal barrier and dysregulation of gut microbiota. Traditional treatments use drugs to manage inflammation with possible probiotic therapy as an adjuvant. However, current standard practices often suffer from metabolic instability, limited targeting and result in unsatisfactory therapeutic outcomes. Here we report on artificial-enzyme-modified Bifidobacterium longum probiotics for reshaping a healthy immune system in inflammatory bowel disease. Probiotics can promote the targeting and retention of the biocompatible artificial enzymes to persistently scavenge elevated reactive oxygen species and alleviate inflammatory factors. The reduced inflammation caused by artificial enzymes improves bacterial viability to rapidly reshape the intestinal barrier functions and restore the gut microbiota. The therapeutic effects are demonstrated in murine and canine models and show superior outcomes to traditional clinical drugs.

Recapitulating the Lateral Organization of Membrane Receptors at the Nanoscale

Many cell membrane functions emerge from the lateral presentation of membrane receptors. The link between the nanoscale organization of the receptors and ligand binding remains, however, mostly unclear. In this work, we applied surface molecular imprinting and utilized the phase behavior of lipid bilayers to create platforms that recapitulate the lateral organization of membrane receptors at the nanoscale. We used liposomes decorated with amphiphilic boronic acids that commonly serve as synthetic saccharide receptors and generated three lateral modes of receptor presentation─random distribution, nanoclustering, and receptor crowding─and studied their interaction with saccharides. In comparison to liposomes with randomly dispersed receptors, surface-imprinted liposomes resulted in more than a 5-fold increase in avidity. Quantifying the binding affinity and cooperativity proved that the boost was mediated by the formation of the nanoclusters rather than a local increase in the receptor concentration. In contrast, receptor crowding, despite the presence of increased local receptor concentrations, prevented multivalent oligosaccharide binding due to steric effects. The findings demonstrate the significance of nanometric aspects of receptor presentation and generation of multivalent ligands including artificial lectins for the sensitive and specific detection of glycans.

Analysis of tri-benzeneboronic esters of monosaccharides formed in aqueous solution by MALDI-TOF MS and DFT calculations

The affinity interactions between boronic acids and sugars have been successfully exploited in many fields, such as the sensing of saccharides, selective enrichment of glycoconjugates, and drug delivery. However, despite multiple techniques having been adopted to investigate the reaction of boronate affinity, the pathway of boronate esters formation under aqueous conditions remains controversial. We report a MALDI-MS approach to investigate the interactions between phenylboronic acid and monosaccharides in neutral aqueous solution by using polylevodopa as an innovative substrate instead of conventional matrix. A series of unusual tri-benzeneboronic esters were then revealed. The mass spectrometry data indicate that they bear a dibenzenepyroboronate cyclic ester moiety with seven-membered ring or eight-membered ring. With the aid of theoretical computations, their most likely geometrical structures are elucidated, and these tri-benzeneboronic esters are proposed to be formed via a boroxine binding monosaccharide pathway. This work provides more insight into the mechanism of boronate affinity interaction between boronic acid and sugars and proves the developed MALDI-MS approach is promising for studying interactions between small molecules.

Quantitative In Silico Prediction of the Rate of Protodeboronation by a Mechanistic Density Functional Theory-Aided Algorithm

Computational reaction prediction has become a ubiquitous task in chemistry due to the potential value accurate predictions can bring to chemists. Boronic acids are widely used in industry; however, understanding how to avoid the protodeboronation side reaction remains a challenge. We have developed an algorithm for in silico prediction of the rate of protodeboronation of boronic acids. A general mechanistic model devised through kinetic studies of protodeboronation was found in the literature and forms the foundation on which the algorithm presented in this work is built. Protodeboronation proceeds through 7 distinct pathways, though for any particular boronic acid, only a subset of mechanistic pathways are active. The rate of each active mechanistic pathway is linearly correlated with its characteristic energy difference, which in turn can be determined using Density Functional Theory. We validated the algorithm using leave-one-out cross-validation on a data set of 50 boronic acids and made a further 50 rate predictions on academically and industrially important boronic acids out of sample. We believe this work will provide great assistance to chemists performing reactions that feature boronic acids, such as Suzuki-Miyaura and Chan-Evans-Lam couplings.

Boronic Acid-Tethered Silk Fibroin for pH-Dependent Mucoadhesion

Mucus lines all surfaces of the human body not covered by skin and provides lubrication, hydration, and protection. The properties of mucus are influenced by changes in pH that may occur due to physiological conditions and pathological circumstances. Reinforcing the mucus barrier with biopolymers that can adhere to mucus in different conditions can be a useful strategy for protecting the underlying mucosae from damage. In this work, regenerated silk fibroin (silk) was chemically modified with phenyl boronic acid to form reversible covalent complexes with the 1,2- or 1,3-diols. The silk modified with boronic acid pendant groups has an increased affinity for mucins, whose carbohydrate component is rich in diols. These results offer new applications of silk in mucoadhesion, and the ability to bind diols to the silk lays the foundation for the development of silk-based sugar-sensing platforms.

Fluorescence Sensing of Monosaccharides by Bis-boronic Acids Derived from Quinolinium Dicarboxamides: Structural and Spectroscopic Studies

Three new diboronic acid-substituted bisquinolinium salts were synthesized, structurally described by single-crystal X-ray diffraction, and studied in-depth as fluorescent receptors for six monosaccharides and two open-chain polyols in water at physiological pH. The dicationic pyridine-2,6-dicarboxamide-based receptors contain two N-quinolinium rings as the fluorescent units covalently linked to three different isomers of phenylboronic acid (ortho, 2; meta, 3; and para, 4) as chelating binding sites for polyols. Additions of glucose/fructose in the micromolar concentration range to receptors 2 and 3 induce significant fluorescence changes, but in the presence of arabinose, galactose, mannose, and xylose, only modest optical changes are observed. This optical change is attributed to a static photoinduced electron transfer mechanism. The meta-diboronic receptor 3 exhibited a high affinity/selectivity toward glucose (K = 3800 M^-1) over other monosaccharides including common interfering species such as fructose and mannitol. Based on multiple spectroscopic tools, electrospray ionization high-resolution mass spectrometry, crystal structures, and density functional theory calculations, the binding mode between 3 and glucose is proposed as a 1:1 complex with the glucofuranose form involving a cooperative chelating diboronate binding. These results demonstrate the usefulness of a new set of cationic fluorescent diboronic acid receptors with a strong ability for optical recognition of glucose in the sub-millimolar concentration range.

Aggregation-Based Bacterial Separation with Gram-Positive Selectivity by Using a Benzoxaborole-Modified Dendrimer

Antimicrobial-resistant (AMR) bacteria have become a critical global issue in recent years. The inefficacy of antimicrobial agents against AMR bacteria has led to increased difficulty in treating many infectious diseases. Analyses of the environmental distribution of bacteria are important for monitoring the AMR problem, and a rapid as well as viable pH- and temperature-independent bacterial separation method is required for collecting and concentrating bacteria from environmental samples. Thus, we aimed to develop a useful and selective bacterial separation method using a chemically synthesized nanoprobe. The metal-free benzoxaborole-based dendrimer probe BenzoB-PAMAM(+), which was synthesized from carboxy-benzoxaborole and a poly(amidoamine) (PAMAM) dendrimer, could help achieve Gram-positive bacterial separation by recognizing Gram-positive bacterial surfaces over a wide pH range, leading to the formation of large aggregations. The recognition site of benzoxaborole has a desirable high acidity and may therefore be responsible for the improved Gram-positive selectivity. The Gram-positive bacterial aggregation was then successfully collected by using a 10 μm membrane filter, with Gram-negative bacteria remaining in the filtrate solution. BenzoB-PAMAM(+) will thus be useful for application in biological analyses and could contribute to further investigations of bacterial distributions in environmental soil or water.

Biased Borate Esterification during Nucleoside Phosphorylase-Catalyzed Reactions: Apparent Equilibrium Shifts and Kinetic Implications

Biocatalytic nucleoside (trans-)glycosylations catalyzed by nucleoside phosphorylases have evolved into a practical and convenient approach to the preparation of modified nucleosides, which are important pharmaceuticals for the treatment of various cancers and viral infections. However, the obtained yields in these reactions are generally determined exclusively by the innate thermodynamic properties of the nucleosides involved, hampering the biocatalytic access to many sought-after target nucleosides. We herein report an additional means for reaction engineering of these systems. We show how apparent equilibrium shifts in phosphorolysis and glycosylation reactions can be effected through entropically driven, biased esterification of nucleosides and ribosyl phosphates with inorganic borate. Our multifaceted analysis further describes the kinetic implications of this in situ reactant esterification for a model phosphorylase.

Hierarchical Materials from High Information Content Macromolecular Building Blocks: Construction, Dynamic Interventions, and Prediction

Hierarchical materials that exhibit order over multiple length scales are ubiquitous in nature. Because hierarchy gives rise to unique properties and functions, many have sought inspiration from nature when designing and fabricating hierarchical matter. More and more, however, nature's own high-information content building blocks, proteins, peptides, and peptidomimetics, are being coopted to build hierarchy because the information that determines structure, function, and interfacial interactions can be readily encoded in these versatile macromolecules. Here, we take stock of recent progress in the rational design and characterization of hierarchical materials produced from high-information content blocks with a focus on stimuli-responsive and "smart" architectures. We also review advances in the use of computational simulations and data-driven predictions to shed light on how the side chain chemistry and conformational flexibility of macromolecular blocks drive the emergence of order and the acquisition of hierarchy and also on how ionic, solvent, and surface effects influence the outcomes of assembly. Continued progress in the above areas will ultimately usher in an era where an understanding of designed interactions, surface effects, and solution conditions can be harnessed to achieve predictive materials synthesis across scale and drive emergent phenomena in the self-assembly and reconfiguration of high-information content building blocks.

Boronate Affinity-Amplified Electrochemical Aptasensing of Lipopolysaccharide

As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (∼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.

A nitric oxide and hydrogen sulfide dual-donating nanosystem for highly synergistic gas-radiotherapy against hepatocellular carcinoma

A drug delivery system (DDS) based on gold-capped mesoporous silica nanoparticles (MSN) is fabricated for loading NOSH-aspirin, a nitric oxide (NO) and hydrogen sulfide (H₂S) dual-donating cytotoxic molecule. The liver targeting and tumor microenvironment responsive properties of the nanosystem enable, for the first time, the concurrent delivery of NO and H₂S from a DDS into hepatocellular carcinoma (HCC) cells. Combined gas-radiotherapy (GT-RT) from drug-loaded DDS (NOSH@MSN-Au-Gal) and X-ray irradiation shows highly synergistic anti-cancer activity against both normoxic and hypoxic HCC cells. Further studies revealed that the combined GT-RT not only retains the well-known anticancer mechanism of NO, H₂S, and X-ray individually, but also alleviates HCC hypoxia via NO- and H₂S- involved unique pathways. In mice, the GT-RT greatly slows the growth of both subcutaneous and orthotopic HCC tumors and shows high biocompatibility. The current work is expected to promote the clinical application of combined GT-RT as an effective cancer treatment.

Synthetic Thermo-Responsive Terpolymers as Tunable Scaffolds for Cell Culture Applications

The use of tailored synthetic hydrogels for in vitro tissue culture and biomanufacturing provides the advantage of mimicking the cell microenvironment without issues of batch-to-batch variability. To that end, this work focused on the design, characterization, and preliminary evaluation of thermo-responsive, transparent synthetic terpolymers based on N-isopropylacrylamide, vinylphenylboronic acid, and polyethylene glycol for cell manufacturing and in vitro culture applications. Polymer physical properties were characterized by FT-IR, ¹H-NMR, DLS, rheology, and thermal-gravimetric analysis. Tested combinations provided polymers with a lower critical solution temperature (LCST) between 30 and 45 °C. Terpolymer elastic/shear modulus varied between 0.3 and 19.1 kPa at 37 °C. Cellular characterization indicated low cell cytotoxicity on NIH-3T3. Experiments with the ovarian cancer model SKOV-3 and Jurkat T cells showed the terpolymers’ capacity for cell encapsulation without interfering with staining or imaging protocols. In addition, cell growth and high levels of pluripotency demonstrated the capability of terpolymer to culture iPSCs. Characterization results confirmed a promising use of terpolymers as a tunable scaffold for cell culture applications.

Polymeric Emissive Materials Based on Dynamic Covalent Bonds

Dynamic covalent polymers, composed of dynamic covalent bonds (DCBs), have received increasing attention in the last decade due to their adaptive and reversible nature compared with common covalent linked polymers. Incorporating the DCBs into the polymeric material endows it with advanced performance including self-healing, shape memory property, and so forth. However, the emissive ability of such dynamic covalent polymeric materials has been rarely reviewed. Herein, this review has summarized DCBs-based emissive polymeric materials which are classified according to the different types of DCBs, including imine bond, acylhydrazone bond, boronic ester bond, dynamic C-C bond, as well as the reversible bonds based on Diels–Alder reaction and transesterification. The mechanism of chemical reactions and various stimuli-responsive behaviors of DCBs are introduced, followed by typical emissive polymers resulting from these DCBs. By taking advantage of the reversible nature of DCBs under chemical/physical stimuli, the constructed emissive polymeric materials show controllable and switchable emission. Finally, challenges and future trends in this field are briefly discussed in this review.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Electrochemical Detection of Femtomolar DNA via Boronate Affinity-Mediated Decoration of Polysaccharides with Electroactive Tags

In view of their high efficiency and cost-effectiveness, polymers are of great promise as carriers for signal tags in amplified detection. Herein, we present a polysaccharide-amplified method for the electrochemical detection of a BRCA1 breast cancer gene-derived DNA target at the femtomolar levels. Briefly, peptide nucleic acid (PNA) with a complementary sequence was tethered as the capture probe for the DNA target, to which carboxyl group-containing polysaccharides were then attached via facile phosphate-Zr(IV)-carboxylate crosslinking, followed by the decoration of polysaccharide chains with electroactive ferrocene (Fc) signal tags via affinity coupling between a cis-diol site and phenylboronic acid (PBA) group. As the polysaccharide chain contains hundreds of cis-diol sites, boronate affinity can enable the site-specific decoration of each polysaccharide chain with hundreds of Fc signal tags, efficiently transducing each target capture event into the decoration of many Fc signal tags. As polysaccharides are cheap, renewable, ubiquitous, and biodegradable natural biopolymers, the use of polysaccharides for signal amplification offers the benefits of high efficiency, cost-effectiveness, excellent biocompatibility, and environmental friendliness. The linear range of the polysaccharide-amplified method for DNA detection was demonstrated to be from 10 fM to 10 nM (R² = 0.996), with the detection limit as low as 2.9 fM. The results show that this method can also discriminate single base mismatch with satisfactory selectivity and can be applied to DNA detection in serum samples. In view of these merits, the polysaccharide-amplified PNA-based electrochemical method holds great promise in DNA detection with satisfactory sensitivity and selectivity.

Data-Driven Prediction of Circular Dichroism-Based Calibration Curves for the Rapid Screening of Chiral Primary Amine Enantiomeric Excess Values

Here, we describe the prediction of the circular dichroism (CD) response of a three-component chiroptical sensor for enantiomeric excess (ee) determination of chiral amines using a multivariate fit to electronic and steric parameters. These computationally derived parameters can be computed for nearly any amine and correlate well with the CD response of the 12 amines comprising the training set. The resulting model was used to accurately predict the CD response of a test set of chiral amines. Theoretical calibration curves were then created and used to determine the ee of solutions of unknown ee. Using this method, the error in ee determination differed by less than 10% compared to experimentally generated calibration curves.

Bis-Boronic Acid Liposomes for Carbohydrate Recognition and Cellular Delivery

Liposomes are effective therapeutic delivery nanocarriers due to their ability to encapsulate and enhance the pharmacokinetic properties of a wide range of drugs and diagnostic agents. A primary area in which improvement is needed for liposomal drug delivery is to enhance the delivery of these nanocarriers to cells. Cell membrane glycans provide exciting targets for liposomal delivery since they are often densely clustered on cell membranes and glycan overabundance and aberrant glycosylation patterns are a common feature of diseased cells. Herein, we report a liposome platform incorporating bis-boronic acid lipids (BBALs) to increase valency in order to achieve selective saccharide sensing and enhance cell surface binding interactions based on carbohydrate binding interactions. In order to vary properties, multiple BBALs ( 1a-d ) with variable linkers in between the binding units were designed and synthesized. Fluorescence-based microplate screening of carbohydrate binding showed that these compounds exhibit varying binding properties depending on their structures. Additionally, fluorescence microscopy experiments indicated enhancements in cellular association when BBALs were incorporated in liposomes. These results demonstrate that multivalent BBALs serve as an exciting glycan binding liposome system for targeted liposome delivery.

Tuning the selectivity of amino acid recognition with dynamic covalent bond constrained fluorophores in aqueous media

The recognition and discrimination of amino acids are generating continuous interest due to their importance. Herein we developed a series of dynamic covalent reaction constrained aldehyde-derived fluorescent probes for the binding of amino acids with tunable selectivity. Diverse emission behaviors were obtained via pH triggered movement of ring-chain tautomerization equilibrium of aldehyde probes. By taking advantage of the distinct pK_a and reactivity of aldehyde probes and amino acids, unique fluorescence signaling patterns were generated, and the selectivity for amino acid recognition was further modulated. The selective recognition of Cys/Hcy was attained at pH 7.4 as a result of thiazolidine formation. The manipulation of the reactivity at pH 10 enabled the realization of high selectivity for His and Cys, respectively. Moreover, pH and redox stimuli-responsive dynamic covalent networks were constructed for the regulation of amino acid recognition. The strategies and results described should be appealing in many aspects, including dynamic assemblies, molecular sensing, biological labeling, and smart materials.

Rapid and Selective 19F NMR-Based Sensors for Fingerprint Identification of Ribose

Ribose plays an important role in the process of life. Excessive ribose in the human cerebrospinal fluid or urine can be used as an early diagnostic marker of leukoencephalopathy. Fluorinated phenylboronic acid combined with ¹⁹F NMR spectroscopy was a powerful method for molecular recognition. However, phenylboronic acid-based sensors for selective detection of ribose are rarely reported in the literature. In this study, the rapid and highly selective recognition of ribose was studied by ¹⁹F NMR and 2-fluorophenylboric acid. It was found that 2-fluoro-phenylboric acid was an appropriate ¹⁹F NMR-based sensor molecule for the determination of ribose under physiological conditions with high selectivity and robust anti-interference ability. When 2-fluorophenylboric acid was used for the detection of ribose in human urine without any sample pretreatment, a limit of detection of 78 μM was obtained at room temperature under given ¹⁹F NMR experimental conditions (400 MHz, 512 scans, ca. 12 min), which can well meet the needs of practical application.

Dual-source powered nanomotor with integrated functions for cancer photo-theranostics

While the miniaturization and motility of artificial nanomotors made them popular tools for exploring novel and innovative biomedical cancer treatment strategies, the integration of multiple functions on the small motor bodies is key to achieve further progress but remains unresolved. Here, we propose a dual-source powered Janus nanomotor whose composition integrates multiple photo-theranostic functions such as surface-enhanced Raman scattering (SERS) sensing, fluorescence imaging/photoacoustic imaging (PAI), photodynamic therapy (PDT), and photothermal therapy (PTT). This nanomotor can be fabricated by sputtering a thin gold layer onto one side of mesoporous silica (mSiO₂) combined with surface modification by photo-sensitizer, Raman reporter, and catalase. Upon illumination with 808 nm near-infrared light, the half-coated gold nanoshell serves as PAI/PTT agent, and by upconverting NIR to visible light, the pre-loaded photosensitizer can be excited by the upconverted light of UCNPs to convert the dissolved oxygen (O₂) into reactive oxygen species for efficient PDT. Furthermore, ratiometric SERS signal can be captured to quantitatively detect the tumor marker, H₂O₂, in cellular microenvironments. The immobilized catalase as a nano-engine can catalyze endogenous H₂O₂ to O₂. This function not only improves the hypoxic tumor microenvironment and therefore enhances PDT efficiency, but also provides a thrust force for deep penetration. As a proof of concept for the in vivo trial we performed cancer photo-theranostics where our nanomotors successfully treated a mouse breast tumor in a subcutaneous tumor model. The results are promising and encourage the use of an integrated nanomotor platform that could be further developed into a photo-theranostic agent for superficial cancer treatment.

Enantioselective Cobalt-Catalyzed Hydroboration of Ketone-Derived Silyl Enol Ethers

Catalytic asymmetric hydroboration of alkenes is a powerful tool for the synthesis of natural products, agrochemicals, and pharmaceuticals via the versatile transformations of chiral alkyl boronic esters. However, the scope of available alkenes is limited to styrenes, activated alkenes, and compounds with directing groups. The catalytic enantioselective hydroboration of heteroatom-substituted alkenes is rarely explored and those catalyzed by earth-abundant metals are yet to be reported. Herein, we report a cobalt-catalyzed asymmetric hydroboration of ketone-derived silyl enol ethers and provide a convenient approach to access valuable enantiopure β-hydroxy boronic esters. This protocol features mild reaction conditions, a broad substrate scope, and excellent enantioselectivities (up to 99 % ee). This approach was applied in the successful synthesis of salmeterol and albuterol, demonstrating its potential to streamline complex molecule synthesis.

Dynamic combinatorial libraries of a dimercapto-pillar[5]arene

We report the synthesis and dynamic covalent chemistry (DCvC) of an A1/A2-dimercapto-functionalized pillar[5]arene (Di-SH-P5). The introduction of thiol moieties into this macrocyclic host makes it an effective building block for making a dynamic combinatorial library (DCL), giving rise to a set of cyclic trimers with intriguing host-guest properties as the dominant constituents.

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

A Nanopore-Based Saccharide Sensor

Saccharides play critical roles in many forms of cellular activities. Saccharide structures are however complicated and similar, setting a technical hurdle for direct identification. Nanopores, which are emerging single molecule tools sensitive to minor structural differences between analytes, can be engineered to identity saccharides. A hetero-octameric Mycobacterium smegmatis porin A nanopore containing a phenylboronic acid was prepared, and was able to clearly identify nine monosaccharide types, including D-fructose, D-galactose, D-mannose, D-glucose, L-sorbose, D-ribose, D-xylose, L-rhamnose and N-acetyl-D-galactosamine. Minor structural differences between saccharide epimers can also be distinguished. To assist automatic event classification, a machine learning algorithm was developed, with which a general accuracy score of 0.96 was achieved. This sensing strategy is generally suitable for other saccharide types and may bring new insights to nanopore saccharide sequencing.

Mechanism of Self-Healing Hydrogels and Application in Tissue Engineering

Self-healing hydrogels and traditional hydrogels both have three-dimensional polymeric networks that are capable of absorbing and retaining a large amount of water. Self-healing hydrogels can heal and restore damage automatically, and they can avoid premature failure of hydrogels caused by mechanical damage after implantation. The formation mechanism of self-healing hydrogels and the factors that hydrogels can load are various. Researchers can design hydrogels to meet the needs of different tissues through the diversity of hydrogels Therefore, it is necessary to summarize different self-healing mechanisms and different factors to achieve different functions. Here, we briefly reviewed the hydrogels designed by researchers in recent years according to the self-healing mechanism of water coagulation. Then, the factors for different functions of self-healing hydrogels in different tissues were statistically analyzed. We hope our work can provide effective support for researchers in the design process of self-healing hydrogel.