Insights into catalytic oxidation at the Au/TiO(2) dual perimeter sites

Tailoring surface morphology on anatase TiO2 supported Au nanoclusters: implications for O2 activation

Strong interaction between the support surface and metal clusters activates the adsorbed molecules at the metal cluster-support interface. Using plane-wave DFT calculations, we precisely model the interface between anatase TiO2 and small Au nanoclusters. Our study focusses on the adsorption and activation of oxygen molecules on anatase TiO2, considering the influence of oxygen vacancies and steps on the surface. We find that the plane (101) and the stepped (103) surfaces do not support O2 activation, but the presence of oxygen vacancies results in strong adsorption and O-O bond length elongation. Modifying the TiO2 surface with supported small Au n nanoclusters (n = 3-5) also significantly enhances O2 adsorption and stretches the O-O bond. We observe that manipulating the cluster orientation through discrete rotations results in improved O2 adsorption and promotes charge transfer from the surface to the molecule. We propose that the orientation of the supported cluster may be manipulated by making the cluster adsorb at the step-edge of (103) TiO2. This results in activated O2 at the cluster-support interface, with a peroxide-range bond length and a low barrier for dissociation. Our modeling demonstrates a straightforward means of exploiting the interface morphology for O2 activation under low precious metal loading, which has important implications for electrocatalytic oxidation reactions and the rational design of supported catalysts.

Distinct Site Motifs Activate O2 and H2 on Supported Au Nanoparticles in Liquid Water

Au nanoparticles catalyze the activation and conversion of small molecules with rates and kinetic barriers that depend on the dimensions of the nanoparticle, composition of the support, and presence of catalytically culpable water molecules that solvate these interfaces. Here, molecular interpretations of steady-state rate measurements, kinetic isotope effects, and structural characterizations reveal how the interface of Au nanoparticles, liquid water, and metal oxide supports mediate the kinetically relevant activation of H2 and sequential reduction of O2-derived intermediates during the formation of H2O2 and H2O. Rates of H2 consumption are 10-100 fold greater on Au nanoparticles supported on metal oxides (e.g., titania) compared to more inert and hydrophobic materials (carbon, boron nitride). Similarly, Au nanoparticles on reducible and Lewis acidic supports (e.g., lanthana) bind dioxygen intermediates more strongly and present lower barriers (<22 kJ mol-1) for O-O bond dissociation than inert interfaces formed with silica (>70 kJ mol-1). Selectivities for H2O2 formation increase significantly as the diameters of the Au nanoparticles increase because differences in nanoparticle size change the relative fractions of exposed sites that exist at Au-support interfaces. In contrast, site-normalized rates and barriers for H2 activation depend weakly on the size of Au nanoparticles and the associated differences in active site motifs. These findings suggest that H2O aids the activation of H2 at sites present across all surface Au atoms when nanoparticles are solvated by water. However, molecular O2 preferentially binds and dissociates at Au-support interfaces, leading to greater structure sensitivity for barriers of O-O dissociation across different support identities and sizes of Au nanoparticles. These insights differ from prior knowledge from studies of gas-phase reactions of H2 and O2 upon Au nanoparticle catalysts within dilute vapor pressures of water (10-4 to 0.1 kPa H2O), in which catalysis occurs at the perimeter of the Au-support interface. In contrast, contacting Au catalysts with liquid water (55.5 M H2O) expands catalysis to all surface Au atoms and enables appreciable H2O2 formation.

The multivariate interaction between Au and TiO2 colloids: the role of surface potential, concentration, and defects

The established DLVO theory explains colloidal stability by the electrostatic repulsion between electrical double layers. While the routinely measured zeta potential can estimate the charges of double layers, it is only an average surface property which might deviate from the local environment. Moreover, other factors such as the ionic strength and the presence of defects should also be considered. To investigate this multivariate problem, here we model the interaction between a negatively charged Au particle and a negatively charged TiO2 surface containing positive/neutral defects (e.g. surface hydroxyls) based on the finite element method, over 6000 conditions of these 6 parameters: VPart (particle potential), VSurf (surface potential), VDef (defect potential), DD (defect density), Conc (salt concentration), and R (particle radius). Using logistic regression, the relative importance of these factors is determined: VSurf > VPart > DD > Conc > R > VDef, which agrees with the conventional wisdom that the surface (and zeta) potential is indeed the most decisive descriptor for colloidal interactions, and the salt concentration is also important for charge screening. However, when defects are present, it appears that their density is more influential than their potential. To predict the fate of interactions more confidently with all the factors, we train a support vector machine (SVM) with the simulation data, which achieves 97% accuracy in determining whether adsorption is favorable on the support. The trained SVM including a graphical user interface for querying the prediction is freely available online for comparing with other materials and models. We anticipate that our model can stimulate further colloidal studies examining the importance of the local environment, while simultaneously considering multiple factors.

Charge State of Au Atoms on an Oxidized Rutile TiO2(110) Surface by AFM/KPFM at 78 K

The charge state of noble metal atoms on a semiconductor surface is an important factor in surface catalysis. In this study, Au atoms were deposited on the rutile TiO2(110) surface to characterize its charge properties using atomic force microscopy with Kelvin probe force microscopy at 78 K. Au single atoms, dimers, and trimers at different sites on the surface were investigated. Positively charged Au atoms were verified at oxygen sites, while negatively charged Au atoms were found near oxygen vacancy sites. Furthermore, the charge states of small Au nanoclusters were clarified. Understanding the charge states of Au atoms is significant for identifying their efficient catalytic effects in surface catalysis.

Catalytic NO Reduction by NO Pre-Adsorbed RhCeO2 NO- Clusters

A fundamental understanding on the dynamically structural evolution of catalysts induced by reactant gases under working conditions is challenging but pivotal in catalyst design. Herein, in combination with state-of-the-art mass spectrometry for cluster reactions, cryogenic photoelectron imaging spectroscopy, and quantum-chemical calculations, we identified that NO adsorption on rhodium-cerium bimetallic oxide cluster RhCeO₂ ^- can create a Ce³⁺ ion in product RhCeO₂ NO^- that serves as the starting point to trigger the catalysis of NO reduction by CO. Theoretical calculations substantiated that the reduction of another two NO molecules into N₂ O takes place exclusively on the Ce³⁺ ion while Rh behaves like a promoter to buffer electrons and cooperates with Ce³⁺ to drive NO reduction. Our finding demonstrates the importance of NO in regulating the catalytic behavior of Rh under reaction conditions and provides much-needed insights into the essence of NO reduction over Rh/CeO₂ , one of the most efficient components in three-way catalysts for NO_x removal.

Gas-phase reactions driven by polarized metal-metal bonding in atomic clusters

Multimetallic catalysts exhibit great potential in the activation and catalytic transformation of small molecules. The polarized metal-metal bonds have been gradually recognized to account for the reactivity of multimetallic catalysts due to the synergistic effect of different metal centers. Gas-phase reactions on atomic clusters that compositionally resemble the active sites on related condensed-phase catalysts provide a widely accepted strategy to clarify the nature of polarized metal-metal bonds and the mechanistic details of elementary steps involved in the catalysis driven by this unique chemical bonding. This perspective review concerns the progress in the fundamental understanding of industrially and environmentally important reactions that are closely related to the polarized metal-metal bonds in clusters at a strictly molecular level. The following topics have been summarized and discussed: (1) catalytic CO oxidation with O₂, H₂O, and NO as oxidants (2) and the activation of other inert molecules (e.g., CH₄, CO₂, and N₂) mediated with clusters featuring polarized metal-metal bonding. It turns out that the findings in the gas phase parallel the catalytic behaviors of condensed-phase catalysts and the knowledge can prove to be essential in inspiring future design of promising catalysts.

Catalytic degradation of methylene blue by biosynthesized Au nanoparticles on titanium dioxide (Au@TiO2)

The degradation of methylene blue is a critical procedure in its wastewater remediation and thus has inspired wide catalysis research with semiconductors such as titanium dioxide (TiO₂) and rare metals such as gold (Au). In this study, we report bacterial cells assisting biosynthesis for Au@TiO₂ as an efficient catalyst for the catalytic degradation of methylene blue. Multiple complementary characterization for bio-Au_x@TiO₂ evidenced the evenly distributed Au nanoparticles (NPs) on the bio-TiO₂ layers. Meanwhile, bio-Au₂@TiO₂ displayed the superior catalytic activity in the degradation of methylene blue with the highest kinetics constant (k_app) value of 0.195 min^-1. In addition, bio-Au₂@TiO₂ keeps stable catalytic activity for up to 10 cycles. The origin of the catalytic activity was investigated by the hydroxyl radical fluorescence quantitative analysis and optical band gap analysis. In the bio-Au₂@TiO₂ catalytic system, Au NPs decreased the band gap energy of TiO₂ and enabled the generation of abundant photogeneration hydroxyl radicals, resulting in an enhanced photocatalytic activity. Our microbial synthesized bio-TiO₂ and bio-Au_x@TiO₂ study would be useful for developing green synthesis catalyst technology.

Machine Learning for Electrocatalyst and Photocatalyst Design and Discovery

Electrocatalysts and photocatalysts are key to a sustainable future, generating clean fuels, reducing the impact of global warming, and providing solutions to environmental pollution. Improved processes for catalyst design and a better understanding of electro/photocatalytic processes are essential for improving catalyst effectiveness. Recent advances in data science and artificial intelligence have great potential to accelerate electrocatalysis and photocatalysis research, particularly the rapid exploration of large materials chemistry spaces through machine learning. Here a comprehensive introduction to, and critical review of, machine learning techniques used in electrocatalysis and photocatalysis research are provided. Sources of electro/photocatalyst data and current approaches to representing these materials by mathematical features are described, the most commonly used machine learning methods summarized, and the quality and utility of electro/photocatalyst models evaluated. Illustrations of how machine learning models are applied to novel electro/photocatalyst discovery and used to elucidate electrocatalytic or photocatalytic reaction mechanisms are provided. The review offers a guide for materials scientists on the selection of machine learning methods for electrocatalysis and photocatalysis research. The application of machine learning to catalysis science represents a paradigm shift in the way advanced, next-generation catalysts will be designed and synthesized.

Heterointerface Created on Au-Cluster-Loaded Unilamellar Hydroxide Electrocatalysts as a Highly Active Site for the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a critical element for all sorts of reactions that use water as a hydrogen source, such as hydrogen evolution and electrochemical CO₂ reduction, and novel design principles that provide highly active sites on OER electrocatalysts push the limits of their practical applications. Herein, Au-cluster loading on unilamellar exfoliated layered double hydroxide (ULDH) electrocatalysts for the OER is demonstrated to fabricate a heterointerface between Au clusters and ULDHs as an active site, which is accompanied by the oxidation state modulation of the active site and interfacial direct OO coupling ("interfacial DOOC"). The Au-cluster-loaded ULDHs exhibit excellent activities for the OER with an overpotential of 189 mV at 10 mA cm^-2 . X-ray absorption fine structure measurements reveal that charge transfer from the Au clusters to ULDHs modifies the oxidation states of trivalent metal ions, which can be active sites on the ULDHs. The present study, supported by highly sensitive spectroscopy combining reflection absorption infrared spectroscopy and modulation-excitation spectroscopy and density functional theory calculations, indicates that active sites at the interface between the Au clusters and ULDHs promote a novel OER mechanism through interfacial DOOC, thereby achieving outstanding catalytic performance.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Selective Photocatalytic Activation of Ethanol C-H and O-H Bonds over Multi-Au@SiO2/TiO2: Role of Catalyst Surface Structure and Reaction Kinetics

The chemical bond diversity and flexible reactivity of biomass-derived ethanol make it a vital feedstock for the production of value-added chemicals but result in low conversion selectivity. Herein, composite catalysts comprising SiO₂-coated single- or multiparticle Au cores hybridized with TiO₂ nanoparticles (mono- or multi-Au@SiO₂/TiO₂, respectively) were fabricated via electrostatic self-assembly. The C-H and O-H bonds of ethanol were selectively activated (by SiO₂ and TiO₂, respectively) under irradiation to form CH₃CH^•(OH) or CH₃CH₂O^• radicals, respectively. The formation and depletion kinetics of these radicals was analyzed by electron spin resonance to reveal marked differences between mono- and multi-Au@SiO₂/TiO₂. Consequently, the selectivity of these catalysts for 1,1-diethoxyethane after 6 h irradiation was determined as 81 and 99%, respectively, which was attributed to the more pronounced effect of localized surface plasmon resonance for multi-Au@SiO₂/TiO₂. Notably, only acetaldehyde was formed on a Au/TiO₂ catalyst without a SiO₂ shell. Fourier transform infrared (FTIR) spectroscopy indicated that the C-H adsorption of ethanol was enhanced in the case of multi-Au@SiO₂/TiO₂, while NH₃ temperature-programmed desorption and pyridine adsorption FTIR spectroscopy revealed that multi-Au@SiO₂/TiO₂ exhibited enhanced surface acidity. Collectively, the results of experimental and theoretical analyses indicated that the adsorption of acetaldehyde on multi-Au@SiO₂/TiO₂ was stronger than that on Au/TiO₂, which resulted in the oxidative coupling of ethanol to afford 1,1-diethoxyethane on the former and the dehydrogenation of ethanol to acetaldehyde on the latter.

Kinetics and Thermodynamics of CO Oxidation by (TiO2)6

Molecular level insights into the mechanism and thermodynamics of CO oxidation by a (TiO2)6 cluster have been obtained through density functional calculations. Thereby, in this study, as an example, two different structural isomers of (TiO2)6 are considered with the purpose of understanding the interplay between local structure and activity for the CO oxidation reaction. Active sites in the two isomeric forms were identified on the basis of global and local reactivity descriptors. For the oxidation of CO to CO2, the study considered both sequential and simultaneous adsorption of CO and O2 on (TiO2)6 cluster through the ER and LH mechanisms, respectively. Three different pathways were obtained for CO oxidation by (TiO2)6 cluster, and the mechanistic route of each pathway were identified by locating the transition-state and intermediate structures. The effect of temperature on the rate of the reaction was investigated within the harmonic approximation. The structure-dependent activity of the cluster was rationalized through reactivity descriptors and analysis of the frontier orbitals.

Size and Shape Dependence of the Electronic Structure of Gold Nanoclusters on TiO2

Understanding the mechanism behind the superior catalytic power of single- or few-atom heterogeneous catalysts has become an important topic in surface chemistry. This is particularly the case for gold, with TiO₂ being an efficient support. Here we use scanning tunneling microscopy/spectroscopy with theoretical calculations to investigate the adsorption geometry and local electronic structure of several-atom Au clusters on rutile TiO₂(110), with the clusters fabricated by controlled manipulation of single atoms. Our study confirms that Au₁ and Au₂ clusters prefer adsorption at surface O vacancies. Au₃ clusters adsorb at O vacancies in a linear-chain configuration parallel to the surface; in the absence of O vacancies they adsorb at Ti_5c sites with a structure of a vertically pointing upright triangle. We find that both the electronic structure and cluster-substrate charge transfer depend critically on the cluster size, bonding configuration, and local environment. This suggests the possibility of engineering cluster selectivity for specific catalytic reactions.

Low Temperature HCHO Detection by SnO2/TiO2@Au and SnO2/TiO2@Pt: Understanding by In-Situ DRIFT Spectroscopy

In this work we analyze the effectiveness of decoration of nanocrystalline SnO2/TiO2 composites with gold nanoparticles (Au NPs) and platinum nanoparticles (Pt NPs) in enhancing gas sensor properties in low-temperature HCHO detection. Nanocrystalline SnO2/TiO2 composites were synthesized by a chemical precipitation method with following modification with Pt and Au NPs by the impregnation method. The nanocomposites were characterized by TEM, XRD, Raman and FTIR spectroscopy, DRIFTS, XPS, TPR-H2 methods. In HCHO detection, the modification of SnO2 with TiO2 leads to a shift in the optimal temperature from 150 to 100 °C. Further modification of SnO2/TiO2 nanocomposites with Au NPs increases the sensor signal at T = 100 °C, while modification with Pt NPs gives rise to the appearance of sensor responses at T = 25 °C and 50 °C. At 200 °C nanocomposites exhibited high selectivity toward formaldehyde within the sub-ppm concentration range among different VOCs. The influence of Pt and Au NPs on surface reactivity of SnO2/TiO2 composite and enhancement of the sensor response toward HCHO was studied by DRIFT spectroscopy and explained by the chemical and electronic sensitization mechanisms.

An IrVO4+ Cluster Catalytically Oxidizes Four CO Molecules: Importance of Ir-V Multiple Bonding

The generation and characterization of multiple metal-metal (M-M) bonds between early and late transition metals is vital to correlate the nature of multiple M-M bonds with the related reactivity in catalysis, while the examples with multiple M-M bonds have been rarely reported. Herein, we identified that the quadruple bonding interactions were formed in a gas-phase ion IrV⁺ with a dramatically short Ir-V bond. Oxidation of four CO molecules by IrVO₄⁺ is a highly exothermic process driven by the generation of stable products IrV⁺ and CO₂, and then IrV⁺ can be oxidized by N₂O to regenerate IrVO₄⁺. This finding overturns the general impression that vanadium oxide clusters are unwilling to oxidize multiple CO molecules because of the strong V-O bond and that at most two oxygen atoms can be supplied from a single V-containing cluster in CO oxidation. This study emphasizes the potential importance of heterobimetallic multiple M-M bonds in related heterogeneous catalysis.

Kinetics of H2 Adsorption at the Metal-Support Interface of Au/TiO2 Catalysts Probed by Broad Background IR Absorbance

H₂ adsorption on Au catalysts is weak and reversible, making it difficult to quantitatively study. We demonstrate H₂ adsorption on Au/TiO₂ catalysts results in electron transfer to the support, inducing shifts in the FTIR background. This broad background absorbance (BBA) signal is used to quantify H₂ adsorption; adsorption equilibrium constants are comparable to volumetric adsorption measurements. H₂ adsorption kinetics measured with the BBA show a lower E_app value (23 kJ mol^-1 ) for H₂ adsorption than previously reported from proxy H/D exchange (33 kJ mol^-1 ). We also identify a previously unreported H-O-H bending vibration associated with proton adsorption on electronically distinct Ti-OH metal-support interface sites, providing new insight into the nature and dynamics of H₂ adsorption at the Au/TiO₂ interface.

Defects Engineering on Ceria and C-C Coupling Reactions Using [Au11(PPh3)7I3] Nanocluster: A Combined Experimental and Theoretical Study

Ligand protected atom-precise gold-based catalysts have been utilized in many essential chemical processes, but their mechanism and the fate of the catalyst during reaction are still unrevealed. Atom-precise cluster without ligands are thus highly desirable to maximize atom efficiency, but making these in solution phase is challenging. In this scenario, catalysts with dispersion on oxide support are highly desirable to understand the role of metal core during catalytic reaction. Here, we report the synthesis of Au₁₁(PPh₃)₇I₃ cluster that consists of an incomplete icosahedron core. During its impregnation process on CeO₂ support, all of the ligands were removed from the kernel and the Au₁₁ kernel fits into the defects of ceria (embedded onto the oxygen vacancy of ceria (111) plane). This Au₁₁@CeO₂ has high atom efficiency and catalytic activity for Ullmann-type C-C homocoupling reactions for electron rich substrates. Density functional theory calculations showed that hexagonal arrangements of Au₁₁ kernel on (111) plane of CeO₂ is the most stable one. Theoretical calculations also proved that the atop gold atom has more favorable interaction with phenyl iodide than the second layer gold atoms of the Au₁₁@CeO₂. This demonstrated that the present catalyst mimics the single-atom catalyst-like behavior in facilitating the coupling reactions.

Copper-zirconia interfaces in UiO-66 enable selective catalytic hydrogenation of CO2 to methanol

Molecular interactions with both oxides and metals are essential for heterogenous catalysis, leading to remarkable synergistic impacts on activity and selectivity. Here, we show that the direct link between the two phases (and not merely being together) is required to selectively hydrogenate CO₂ to methanol on catalysts containing Cu and ZrO₂. Materials consisting of isolated Cu particles or atomically dispersed Cu–O–Zr sites only catalyze the reverse water-gas shift reaction. In contrast, a metal organic framework structure (UiO-66) with Cu nanoparticles occupying missing-linker defects maximizes the fraction of metallic Cu interfaced to ZrO₂ nodes leading to a material with high adsorption capacity for CO₂ and high activity and selectivity for low-temperature methanol synthesis.

Molecular interactions with both oxides and metals are essential for heterogenous catalysis, leading to remarkable impacts on activity. Here the authors show that a direct link between Cu and ZrO2 in a metal organic framework is required to hydrogenate CO2 to methanol.

Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO₂ hydrogenation, C–C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

Enhanced Photocatalytic Activity of Au/TiO2 Nanoparticles against Ciprofloxacin

In the last decades, photocatalysis has arisen as a solution to degrade emerging pollutants such as antibiotics. However, the reduced photoactivation of TiO2 under visible radiation constitutes a major drawback because 95% of sunlight radiation is not being used in this process. Thus, it is critical to modify TiO2 nanoparticles to improve the ability to absorb visible radiation from sunlight. This work reports on the synthesis of TiO2 nanoparticles decorated with gold (Au) nanoparticles by deposition-precipitation method for enhanced photocatalytic activity. The produced nanocomposites absorb 40% to 55% more radiation in the visible range than pristine TiO2, the best results being obtained for the synthesis performed at 25 °C and with Au loading of 0.05 to 0.1 wt. %. Experimental tests yielded a higher photocatalytic degradation of 91% and 49% of ciprofloxacin (5 mg/L) under UV and visible radiation, correspondingly. Computational modeling supports the experimental results, showing the ability of Au to bind TiO2 anatase surfaces, the relevant role of Au transferring electrons, and the high affinity of ciprofloxacin to both Au and TiO2 surfaces. Hence, the present work represents a reliable approach to produce efficient photocatalytic materials and an overall contribution in the development of high-performance Au/TiO2 photocatalytic nanostructures through the optimization of the synthesis parameters, photocatalytic conditions, and computational modeling.

Asymmetric Oxygen Vacancies: the Intrinsic Redox Active Sites in Metal Oxide Catalysts

To identify the intrinsic active sites in oxides or oxide supported catalysts is a research frontier in the fields of heterogeneous catalysis and material science. In particular, the role of oxygen vacancies on the redox properties of oxide catalysts is still not fully understood. Herein, some relevant research dealing with M1-O-M2 or M1-□-M2 linkages as active sites in mixed oxides, in oxide supported single-atom catalysts, and at metal/oxide interfaces of oxide supported nanometal catalysts for various reaction systems is reviewed. It is found that the catalytic activity of these oxides not only depends on the amounts of oxygen vacancies and metastable cations but also shows a significant influence from the local environment of the active sites, in particular, the symmetry of the oxygen vacancies. Based on the recent progress in the relevant fields, an "asymmetric oxygen vacancy site" is introduced, which indicates an oxygen vacancy with an asymmetric coordination of cations, making oxygen "easy come, easy go," i.e., more reactive in redox reactions. The establishment of this new mechanism would shed light on the future investigation of the intrinsic active sites in oxide and oxide supported catalysts.

Water-Mediated Reduction of Aqueous N-Nitrosodimethylamine with Pd

Pd-catalyzed reduction has emerged as a promising treatment strategy to remove the recalcitrant disinfection byproduct N-nitrosodimethylamine (NDMA). However, the reaction pathways remain unexplored, and questions remain about how water solvent influences NDMA reduction mechanisms and selectivity. Here, we compute the energies and barriers of all relevant elementary steps in NDMA reduction by H₂ on Pd(111) using density functional theory. We further calculate water-assisted H-shuttling for all hydrogenation reactions explicitly and include water solvation for all elementary reactions implicitly. We parametrize microkinetic models to predict product formation rates and selectivities over a wide range of NDMA concentrations. We show that H₂O-mediated H-shuttling lowers the reaction barriers for all hydrogenation reactions involved in NDMA reduction while implicit solvation has negligible impact on the reaction and activation energies. We further conduct batch experiments with SiO₂-supported Pd nanoparticles and compare them with the microkinetic models. The predicted rates, selectivity, and apparent activation energy from the model parametrized with both explicit H₂O-mediated H-shuttling and implicit solvation correspond well with experimental observations. Models that ignore water as an H-shuttle or solvent fail to recover the experimental rates and apparent activation energy. We identified the rate-determining steps of the reaction and show the reaction flow pathways of the complicated reaction network. Finally, we demonstrate that water-mediated H-shuttling changes the rate-determining steps and reaction flows of elementary reactions.

Highly Efficient Photoinduced Enhanced Raman Spectroscopy (PIERS) from Plasmonic Nanoparticles Decorated 3D Semiconductor Arrays for Ultrasensitive, Portable, and Recyclable Detection of Organic Pollutants

Semiconductor materials have become competitive candidates for surface-enhanced Raman scattering (SERS) substrates; however, their limited SERS sensitivity hinders the practical applications of semiconductors. Here, we develop a hybrid substrate by integrating anatase/rutile TiO₂ heterostructure with dense plasmonic hotspots of Ag nanoparticle (AgNPs) for efficient photoinduced enhanced Raman spectroscopy (PIERS). The PIERS mechanism is systematically investigated by means of a portable Raman instrument. When ultraviolet (UV) light irradiates the substrate, the TiO₂-Ag hybrid arrays produce remarkable charge-transfer enhancement, which can be ascribed to the highly efficient charge separation driven by heterojunction and transfer from TiO₂ heterostructure to AgNPs. This platform allows for the rapid detection of multifold organic species, including malachite green (MG), crystal violet (CV), rhodamine 6G (R6G), thiram, and acephate, and as high as 27.8-fold enhancement over the normal SERS is achieved, representing the highest PIERS magnification up to the present time. The intensive PIERS enhancement makes it ultrasensitively detect analyte concentration of an order of magnitude lower than that of SERS method. The improved sensitivity and resolution can be readily realized by simple UV irradiation, which represents a major advantage of our PIERS methodology. Besides, the integration of uniform TiO₂ heterostructure arrays with AgNPs generates superior signal reproducibility with relative standard deviation (RSD) value of less than 14%. In addition, the detected molecules on the substrate can be eliminated by photocatalytic degradation after PIERS measurements by using UV irradiation, which makes the substrate reusable for 15 cycles. The ultrahigh sensitivity, superior reproducibility, and excellent recyclability displayed by our platform may provide new opportunities in field detection analysis coupled with a portable Raman instrument.

Oxygen vacancy-mediated WO3 nanosheets by etched {200} facets and the efficient visible-light photocatalytic oxygen evolution

The abundant oxygen vacancies in WO₃ nanosheets result in the significant improvement of the photocatalytic O₂ evolution.

Simultaneous introduction of oxygen vacancies and Bi metal onto the {001} facet of Bi3O4Cl woven nanobelts for synergistically enhanced photocatalysis

In order to relieve air pollution problems via photocatalytic NO purification, we prepared Bi3O4Cl (BOC) woven nanobelts with exposed {001} facets by a one-pot hydrothermal method. The as-prepared catalysts were modified by a simple chemical reduction to introduce oxygen vacancies (OVs) and plasmonic Bi metal on their surfaces. The photocatalytic performance was strongly dependent on the OVs and surface plasmon resonance (SPR) effect induced by Bi metal. DFT calculations and in situ DRIFTS study were closely combined to show that the OVs could not only induce the formation of a middle-gap in BOC which increases the production of the ˙OH species by introducing more holes on the valence band, but also promote the generation of ˙O2- species by activating the adsorbed O2 on the surface. Meanwhile, the Bi metal can serve both as an electron donor and a bridge for charge transfer to promote charge separation. As a result, the OVs and Bi metal could synergistically tailor the charge transfer pathway and enhance the photocatalytic performance significantly. Moreover, the reaction intermediates were revealed and the mechanism of photocatalytic NO oxidation was proposed based on in situ DRIFTS spectra. The design concept of modifying the catalyst surface via simultaneous introduction of OVs and Bi metal on the catalyst surface could offer a novel strategy to enhance the photocatalytic performance of other nanomaterials for environmental and energy-related applications.

Etching-dependent fluorescence quenching of Ag-dielectric-Au three-layered nanoshells: The effect of inner Ag nanosphere

In this report, Ag-dielectric-Au three-layered nanoshells with controlled inner core size were synthesized. The fluorescence emission of the rhodamine 6G (R6G) could be quenched by the three-layered nanoshells distinctly. What's more, the fluorescence quenching efficiency could be further improved by tuning the etching of inner Ag nanosphere. The maximum fluorescence quenching efficiency is obtained when the separate layer just appears between the inner Ag core and the outer Au shell. Whereas the fluorescence quenching efficiency is weakened when no gaps take place around the inner Ag core or the separate layer is too thick and greater than 13nm. The fluorescence quenching properties of the Ag-dielectric-Au three-layered nanoshells with different initial sizes of the Ag nanoparticles are also studied. The maximum fluorescence quenching efficiency is obtained when the three-layered nanoshells are synthesized based on the Ag nanoparticles with 60nm, which is better than others two sizes (42 and 79nm). Thus we believe that the size of initial Ag nanospheres also greatly affects the optimized fluorescence quenching efficiency. These results about fluorescence quenching properties of Ag-dielectric-Au three-layered nanoshells present a potential for design and fabrication of fluorescence nanosensors based on tuning the geometry of the inner core and the separate layer.

Crystal-defect-induced facet-dependent electrocatalytic activity of 3D gold nanoflowers for the selective nanomolar detection of ascorbic acid

Understanding and exploring the decisive factors responsible for superlative catalytic efficiency is necessary to formulate active electrode materials for improved electrocatalysis and high-throughput sensing. This research demonstrates the ability of bud-shaped gold nanoflowers (AuNFs), intermediates in the bud-to-blossom gold nanoflower synthesis, to offer remarkable electrocatalytic efficiency in the oxidation of ascorbic acid (AA) at nanomolar concentrations. Multicomponent sensing in a single potential sweep is measured using differential pulse voltammetry while the kinetic parameters are estimated using electrochemical impedance spectroscopy. The outstanding catalytic activity of bud-structured AuNF [iAuNFp(Bud)/iGCp ≅ 100] compared with other bud-to-blossom intermediate nanostructures is explained by studying their structural transitions, charge distributions, crystalline patterns, and intrinsic irregularities/defects. Detailed microscopic analysis shows that density of crystal defects, such as edges, terraces, steps, ledges, kinks, and dislocation, plays a major role in producing the high catalytic efficiency. An associated ab initio simulation provides necessary support for the projected role of different crystal facets as selective catalytic sites. Density functional theory corroborates the appearance of inter- and intra-molecular hydrogen bonding within AA molecules to control the resultant fingerprint peak potentials at variable concentrations. Bud-structured AuNF facilitates AA detection at nanomolar levels in a multicomponent pathological sample.