Creation of Novel Solid-Solution Alloy Nanoparticles on the Basis of Density-of-States Engineering by Interelement Fusion

PdRu Bimetallic Nanoparticles/Metal-Organic Framework Composite through Supercritical CO2-Assisted Immobilization

Metal-nanoparticle (NP)/metal-organic framework (MOF) composites have attracted considerable attention as heterogeneous catalysts. Compared with porous carbon, silica, and alumina, the charge-transfer interaction between the metal NPs and the MOF accelerated the catalytic activity. In this study, PdRu bimetallic NPs were successfully immobilized on MOFs such as MIL-101(Cr) by using supercritical carbon dioxide. The STEM-EDX images show a uniform 3D distribution of the PdRu bimetallic NPs on MIL-101(Cr). The resulting PdRu@MIL-101(Cr) catalyst exhibited higher CO oxidation than monometal/MOF composites such as Pd@MIL-101(Cr) and Ru@MIL-101(Cr). Furthermore, PdRu@MIL-101(Cr) exhibited higher catalytic activity than PdRu@SiO2. This is because the particle size of the PdRu bimetallic NPs in MIL-101(Cr) was within the range of 2-3 nm. The synergistic effects were based on the combination of two metals, Pd and Ru, small bimetal particle formation, and charge-transfer interactions between the bimetal NPs and the MOF. These factors enhance the catalytic activity of the bimetal/MOF composites.

Coherent hexagonal platinum skin on nickel nanocrystals for enhanced hydrogen evolution activity

Metastable noble metal nanocrystals may exhibit distinctive catalytic properties to address the sluggish kinetics of many important processes, including the hydrogen evolution reaction under alkaline conditions for water-electrolysis hydrogen production. However, the exploration of metastable noble metal nanocrystals is still in its infancy and suffers from a lack of sufficient synthesis and electronic engineering strategies to fully stimulate their potential in catalysis. In this paper, we report a synthesis of metastable hexagonal Pt nanostructures by coherent growth on 3d transition metal nanocrystals such as Ni without involving galvanic replacement reaction, which expands the frontier of the phase-replication synthesis. Unlike noble metal substrates, the 3d transition metal substrate owns more crystal phases and lower cost and endows the hexagonal Pt skin with substantial compressive strains and programmable charge density, making the electronic properties particularly preferred for the alkaline hydrogen evolution reaction. The energy barriers are greatly reduced, pushing the activity to 133 mA cm_geo^-2 and 17.4 mA μg_Pt^-1 at -70 mV with 1.5 µg of Pt in 1 M KOH. Our strategy paves the way for metastable noble metal catalysts with tailored electronic properties for highly efficient and cost-effective energy conversion.

Synthesis and structural properties of high-entropy nanoalloys made by physical and chemical routes

The development of synthesis methods with enhanced control over the composition, size and atomic structure of High Entropy Nano-Alloys (HENA) could give rise to a new repertoire of nanomaterials with unprecedented functionalities, notably for mechanical, catalytic or hydrogen storage applications. Here, we have developed two original synthesis methods, one by a chemical route and the other by a physical one, to fabricate HENA with a size between 3 and 10 nm and a face centered cubic structure containing three (CoNiPt), four (CoNiPtCu and CoNiPtAu) or five (CoNiPtAuCu) metals close to the equiatomic composition. The key point in the proposed chemical synthesis method is to compensate the difference in reactivity of the different metal precursors by increasing the synthesis temperature using high boiling solvents. Physical syntheses were performed by pulsed laser ablation using a precise alternating deposition of the individual metals on a heated amorphous carbon substrate. Finally, we have exploited aberration-corrected transmission electron microscopy to explore the nanophase diagram of these nanostructures and reveal intrinsic thermodynamic properties of those complex nanosystems. In particular, we have shown (i) that the complete mixing of all elements can only occur close to the equiatomic composition and (ii) how the Ostwald ripening during HENA synthesis can induce size-dependent deviations from the equiatomic composition leading to the formation of large core-shell nanoparticles.

Sequential galvanic replacement mediated Pd-doped hollow Ru-Te nanorods for enhanced hydrogen evolution reaction mass activity in alkaline media

High catalytic activity, long-term stability, and economical Pt-free catalysts for the hydrogen evolution reaction (HER) are required for the conversion of renewable energy systems. Noble nanomaterial Pt is a superior electrolysis catalyst for water splitting under typical experimental conditions with a relatively low overpotential. However, the use of Pt is limited by its high cost and activity degradation over time. Among several prospective alternatives, Ru has emerged as a promising alkaline electrolysis catalyst because of its significant catalytic activity and reduced cost compared to Pt. We designed and suggested Pd-doped hollow Ru-Te nanorods (PdRuTeNRs) via successive galvanic replacement reactions of sacrificial Te nanotemplates to further boost efficiency. The Pd/partially oxidized RuO₂/Ru/Te hetero-interfaced composition exhibited an HER mass activity of 11.3 A g^-1 Ru, twice that of Pt. In addition, the present PdRuTeNRs sufficiently maintained the activity from the 2000-cycle continuous test, greatly reducing the required cost by a quarter.

Alloying at a Subnanoscale Maximizes the Synergistic Effect on the Electrocatalytic Hydrogen Evolution

Bonding dissimilar elements to provide synergistic effects is an effective way to improve the performance of metal catalysts. However, as the properties become more dissimilar, achieving synergistic effects effectively becomes more difficult due to phase separation. Here we describe a comprehensive study on how subnanoscale alloying is always effective for inter-elemental synergy. Thirty-six combinations of both bimetallic subnanoparticles (SNPs) and nanoparticles (NPs) were studied systematically using atomic-resolution imaging and catalyst benchmarking based on the hydrogen evolution reaction (HER). Results revealed that SNPs always produce greater synergistic effects than NPs, the greatest synergistic effect was found for the combination of Pt and Zr. The atomic-scale miscibility and the associated modulation of electronic states at the subnanoscale were much different from those at the nanoscale, which was observed by annular-dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively.

A Novel Method to Synthesize Co/Fe3O4 Nanocomposites with Optimal Magnetic and Microwave Performance

The magnetic interactions between neighboring magnetic nanoparticles make the synthesis of nanocomposites made of two kinds of magnetic nanoparticles extremely difficult. In this paper, to achieve an effective nanocomposite of Co and Fe₃O₄ nanoparticles, a special urchin-like Co nanomatrix was used to prepare the Co/Fe₃O₄ nanocomposites. The Fe₃O₄ nanoparticles are evenly embedded into the branches of the C_O clusters, bringing the two types of particles into close contact and ensuring the optimal magnetic and microwave properties. The electromagnetic (EM) parameters at 1-18 GHz and the magnetic loss tangents can be effectively modulated, and the absorption frequency bands of the EM waves are shifted to the X-Ku bands (8-18 GHz) from the S-C bands (2-8 GHz) after the Fe₃O₄ nanoparticles are compounded.

Colloidal synthesis of nanoparticles: from bimetallic to high entropy alloys

At the nanoscale, the synthesis of a random alloy (i.e. without phase segregation, whatever the composition) by chemical synthesis remains a difficult task, even for simple binary type systems. In this context, a unique approach based on the colloidal route is proposed enabling the synthesis of face-centred cubic and monodisperse bimetallic, trimetallic, tetrametallic and pentametallic nanoparticles with diameters around 5 nm as solid solutions. The Fe-Co-Ni-Pt-Ru alloy (and its subsets) is considered a challenging task as each element has fairly different physico-chemical properties. Particles are prepared by temperature-assisted co-reduction of metal acetylacetonate precursors in the presence of surfactants. It is highlighted how the correlation between precursors' degradation temperatures and reduction potential values of the metal cations is the driving force to achieve a homogeneous distribution of all elements within the nanoparticles.

Thermodynamic stability of Pd-Ru alloy nanoparticles: combination of density functional theory calculations, supervised learning, and Wang-Landau sampling

Solid-solution alloy nanoparticles (NPs) comprising Pd and Ru, which are immiscible in the bulk state, have been synthesised and show excellent catalytic performance. To date, most studies have evaluated the stability of alloy NPs at 0 K only. Because the thermodynamic stability of Pd-Ru alloy NPs may differ from that of the alloy in the bulk state, the stable configuration of the NPs must be evaluated under a finite temperature. Such stability evaluations are critical for developing the durable NPs as catalysts. Therefore, the thermodynamic stability of Pd-Ru alloy NPs was analysed using density functional theory (DFT), supervised learning (SL), and Wang-Landau sampling. We calculated the excess energy of Pd-Ru alloy NPs, which depends on their composition, structure, NP size, adatom type, and defects, and applied SL to all models. The excess energies of the Pd-Ru alloy NPs expressed by structural information, such as the surface-to-volume ratio, correlated with those calculated using DFT. Wang-Landau sampling based on the energy estimated by SL gave the thermodynamic stability of Pd-Ru alloy NPs with a stable configuration under a finite temperature. The solid-solution atomic configuration was subdivided into partially mixed configurations in the surface layer or in the core of the NPs, which is different from the bulk state. The partially mixed configuration was determined by the overall composition and surface properties. The findings from the combined method could contribute to a better understanding of the alloy-NP stability and their application in catalysis.

Pushing the Boundaries of Multicomponent Alloy Nanostructures: Hybrid Approach of Liquid Phase Separation and Selective Leaching Processes

ConspectusAlloying, or mixing of multiple metallic elements, is the classical way of novel materials development since the Bronze age. Increased numbers of principal elements expand the compositional space for alloy design vastly, leading to nearly endless possibilities of unexpected and unique materials properties. In contrast to bulk alloying processes represented by casting of molten metal mixtures, the fabrication of multicomponent alloy (MCA) nanostructures such as nanoparticles and nanofoams with more than three elements is often challenging, and a few methodologies for directly synthesizing alloy nanostructures up to denary systems have been suggested recently. However, forming alloy nanoparticles inside another metal matrix, instead of inside aqueous media in wet-chemical synthesis, is a fairly well understood strategy in terms of physical metallurgy. Extracting those alloy nanophases from the matrix could provide an alternative way to fabricate novel MCA nanostructures.In this Account, we describe a hybrid approach of metallurgical bottom-up and chemical top-down processes for fabricating MCA nanostructures including nanoparticles and nanofoams. The former utilizes a liquid-state phase separation process that resembles "oil and water" but occurs at the nanoscale due to thermodynamic mixing relations among alloying elements and a rapid quenching process. Thermodynamic prediction of the immiscible boundary in a temperature-composition space (miscibility gap) plays a key role in designing precursor alloys for MCA nanostructures. Selective leaching, the chemical top-down process for extracting the alloy nanostructures from the precursors, uses the chemical reactivity difference between the embedded nanostructures and the matrix phase against a certain chemical solution. We discuss here that the precise control of alloy composition and cooling rate based on thermodynamic assessments enables researchers to prepare phase-separating precursor alloys for fabricating both nanoparticles and nanofoams with a broad size range from a few nanometers to a few hundred nanometers. Depending on the alloy systems, the atomic structure of alloy nanostructures could be controlled from fully amorphous to nanocrystalline and even to quasicrystalline structure. We demonstrate how the different sizes of alloy nanostructures fabricated by a single hybrid procedure can be effectively exploited for investigating size-dependent physical properties. The future and potential research directions for this hybrid approach are also briefly discussed. This unique approach for fabricating nanosized alloys provides an extended methodology to discover novel metallic nanomaterials with promising properties in diverse compositional spaces of MCA systems.

Slow Synthesis Methodology-Directed Immiscible Octahedral Pdx Rh1-x Dual-Atom-Site Catalysts for Superior Three-Way Catalytic Activities over Rh

This study provided an effective strategy to construct dual-atom sites by solid-solution alloying. A slow synthesis methodology was established for the solid-solution preparations as dual-atom-site catalysts. The atomic-level homogeneous Pd_x Rh_1-x dual-atom-site catalysts were successfully synthesized over the whole composition range, as evidenced by X-ray powder diffraction and scanning transmission electron microscope energy-dispersive X-ray spectroscopy mapping measurements. The challenging morphology formation in the immiscible alloys was achieved by an energy-controlling process as the octahedral Rh-rich alloys. The Pd_0.3 Rh_0.7 dual-atom-site catalyst had unique surface states to activate the key reactants of CO and NO in the complex three-way catalytic reactions, and it performed significantly better than pure Rh.

Inter-element miscibility driven stabilization of ordered pseudo-binary alloy

An infinite number of crystal structures in a multicomponent alloy with a specific atomic ratio can be devised, although only thermodynamically-stable phases can be formed. Here, we experimentally show the first example of a layer-structured pseudo-binary alloy, theoretically called Z3-FePd₃. This Z3 structure is achieved by adding a small amount of In, which is immiscible with Fe but miscible with Pd and consists of an alternate L1₀ (CuAu-type)-PdFePd trilayer and Pd–In ordered alloy monolayer along the c axis. First-principles calculations strongly support that the specific inter-element miscibility of In atoms stabilizes the thermodynamically-unstable Z3-FePd₃ phase without significantly changing the original density of states of the Z3-FePd₃ phase. Our results demonstrate that the specific inter-element miscibility can switch stable structures and manipulate the material nature with a slight composition change.

Synthetic routes of stabilizing crystal structures can discover atomic pickings with desired properties. Here the authors demonstrate inter-element miscibility of In can act as a stabilizer to create Z3-based ordered alloy without significantly changing the original density of state of Z3-FePd3.

Crystal Structure Control of Binary and Ternary Solid-Solution Alloy Nanoparticles with a Face-Centered Cubic or Hexagonal Close-Packed Phase

The crystal structure significantly affects the physical and chemical properties of solids. However, the crystal structure-dependent properties of alloys are rarely studied because controlling the crystal structure of an alloy at the same composition is extremely difficult. Here, for the first time, we successfully demonstrate the synthesis of binary Ru-Pt (Ru/Pt = 7:3) and Ru-Ir (Ru/Ir = 7:3) and ternary Ru-Ir-Pt (Ru/Ir/Pt = 7:1.5:1.5) solid-solution alloy nanoparticles (NPs) with well-controlled hexagonal close-packed (hcp) and face-centered cubic (fcc) phases, through the chemical reduction method. The crystal structure control is realized by precisely tunning the reduction speeds of the metal precursors. The effect of the crystal structure on the catalytic performance of solid-solution alloy NPs is systematically investigated. Impressively, all the hcp alloy NPs show superior electrocatalytic activities for the hydrogen evolution reaction in alkaline solution compared with the fcc alloy NPs. In particular, hcp-RuIrPt exhibits extremely high intrinsic (mass) activity, which is 3.1 (3.2) and 6.7 (6.9) times enhanced compared to that of fcc-RuIrPt and commercial Pt/C.

Continuous-flow syntheses of alloy nanoparticles

Alloy nanoparticles (NPs), including core-shell, segregated and solid-solution types, show a variety of attractive properties such as catalytic and optical properties and are used in a wide range of applications. Precise control and good reproducibility in the syntheses of alloy NPs are highly demanded because these properties are tunable by controlling alloy structures, compositions, particle sizes, and so on. To improve the efficiency and reproducibility of their syntheses, continuous-flow syntheses with various types of reactors have recently been developed instead of the current mainstream approach, batch syntheses. In this review, we focus on the continuous-flow syntheses of alloy NPs and first overview the flow syntheses of NPs, especially of alloy NPs. Subsequently, the details of flow reactors and their chemistry to synthesize core-shell, segregated, solid-solution types of alloy NPs, and high-entropy alloy NPs are introduced. Finally, the challenges and future perspectives in this field are discussed.

Quantitative Characterization of the Thermally Driven Alloying State in Ternary Ir-Pd-Ru Nanoparticles

Compositional and structural arrangements of constituent elements, especially those at the surface and near-surface layers, are known to greatly influence the catalytic performance of alloyed nanoparticles (NPs). Although much research effort often focuses on the ability to tailor these important aspects in the design stage, their stability under realistic operating conditions remains a major technical challenge. Here, the compositional stability and associated structural evolution of a ternary iridium-palladium-ruthenium (Ir-Pd-Ru) nanoalloy at elevated temperatures have been studied using interrupted in situ scanning transmission electron microscopy and theoretical modeling. The results are based on a combinatory approach of statistical sampling at the sub-nanometer scale for large groups of NPs as well as tracking individual NPs. We find that the solid solution Ir-Pd-Ru NPs (∼5.6 nm) evolved into a Pd-enriched shell supported on an alloyed Ir-Ru-rich core, most notably when the temperature exceeds 500 °C, concurrently with the development of expansive atomic strain in the outer surface and subsurface layers with respect to the core regions. Theoretically, we identify the weak interatomic bonds, low surface energy, and large atomic sizes associated with Pd as the key factors responsible for such observed features.

Room-Temperature Synthesis of Ni and Pt-Co Alloy Nanoparticles Using a Microreactor

Metal nanoparticles (NPs) are key materials used in a broad range of industries. Among the various synthetic routes of NPs, liquid-phase chemical reactions are promising because of their versatility in reaction conditions as well as their potential productivity. However, because the synthesis of NPs involves not only chemical reactions but also nucleation and growth processes, which are typically higher-order reactions in terms of the concentration, a small degree of nonuniformity in the concentration during mixing of reaction solutions can easily result in a wide size distribution of the resultant particles. A typical solution to this problem is to slow the rate of reactions compared with that of mixing; however, as a result, the synthetic processes often require long reaction periods and complex procedures. In this study, we applied a microreactor with excellent mixing performance to NP synthesis to simplify and intensify the processes. We synthesized nickel and platinum-cobalt alloy NPs as model materials. For the Ni NP synthesis, we demonstrated that the quick mixing provided by the microreactor enabled the precise control of the residence time, and consequently, monodispersed Ni NPs with an average size of 3.8 nm were synthesized. For the Pt-Co bimetallic system, the microreactor successfully produced Pt-Co alloy NPs, while batch-type synthesis with weaker mixing intensity resulted in a bimodal mixture of larger Pt NPs and smaller Co NPs. For both Ni and Pt-Co, monodispersed NPs were synthesized by simply mixing the reaction solutions in the microreactor at room temperature. These results demonstrate that the mixing process plays a key role in NP synthesis, and application of a microreactor enables the establishment of a facile and robust synthetic process.

Three-in-One Strategy to Improve Both Catalytic Activity and Selectivity: Nonconcentric Pd-Au Nanoparticles

In direct H₂O₂ synthesis, the Pd-Au alloy was considered as a potential catalyst because of its much better performance compared to the prototype Pd; unfortunately, achieving both high activity and selectivity remains a challenge. Here, we synthesized nonconcentric Pd-Au NPs in which Au domain shells are formed only partially on Pd domain cores and tested them for direct H₂O₂ synthesis. It has three exposed regions of Pd, Au domains, and Pd-Au interfaces in a single NP (hence, a 3-in-1 strategy). Creating nonconcentric forms was demonstrated convincingly by density functional theory calculations. The nonconcentric Pd-Au particles exhibit high and well-balanced performances that are hard to achieve with traditional alloyed Pd-Au. The number of Pd/Au interfaces was found to be the key factor and thus was optimized by controlling the Au precursor concentrations. The hitherto underutilized structure of nonconcentric bimetallic alloys can be useful and thus should be more actively investigated for catalyst development.

Total x-ray scattering setup for crystalline particles at SPring-8 BL15XU NIMS beamline

We report a total x-ray scattering (TXS) system for structural analysis of crystalline particle materials at the BL15XU NIMS beamline of SPring-8 in Japan. To achieve a high angular resolution over a high Q region up to 25 Å^-1, the TXS system was capable of measuring to 120° at an x-ray energy of 29.02 keV with five CdTe pin detectors. The sample alignment and measuring system were controlled by LabView software. The x-ray pair distribution function (PDF) results for Ni bulk powder and Pt and AgRh nanoparticles were successfully simulated by the PDFgui program. In addition, Rietveld refinement results were also obtained from x-ray diffraction patterns, reflecting long-range order in the Pt nanoparticles. We expect that this TXS system may be useful for understanding structural information of crystalline nanoparticles, including amorphous features at their surface region.

Few-nm-sized, phase-pure Au5Sn intermetallic nanoparticles: synthesis and characterization

Nanoparticles of intermetallic compounds have attracted much interest because they can exhibit novel electronic and catalytic properties due to their specific crystal structure, ordered atomic arrangement, and quantum effect. Here, gold-tin (AuSn) bimetallic nanoparticles with various mixing ratios were prepared by a co-reduction method using various protective agents (e.g., polymer, amine, phosphine, carboxylic acid, and thiol). Powder X-ray diffractometry and transmission electron microscopy revealed that few-nm-sized, phase-pure Au5Sn intermetallic nanoparticles (IMNPs) were successfully synthesized when Au3+ and Sn2+ precursors with a ratio of 6 : 4 were co-reduced in the presence of oleylamine. The Au5Sn IMNPs thus prepared did not exhibit localized surface plasmon resonance, in contrast to pure Au nanoparticles of comparable sizes. This suggests that interband transition dominates the optical response due to an increase in the density of states near the Fermi level by introducing Sn. The Au5Sn IMNPs supported on mesoporous silica (SBA-15) catalyzed the aerobic oxidation reaction of indanol.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.

Quantum Materials Exploration by Sequential Screening Technique of Heteroatomicity

Subnanoparticles (SNPs) exhibit unique properties and functions due to their extremely small particle sizes which extend into the quantum scale. Although the synthesis of SNPs requiring precise control of atomicity and composition has not been accomplished, we recently developed an atom-hybridization method (AHM) that realizes such atomic-level control using a macromolecular template. As a next step in the quest for innovative quantum materials, the practical creation of functional subnanomaterials will become a central subject. In this study, we established a new screening technique for functional SNPs by focusing on the simple indium-tin binary system with sequential compositions using the latest AHM. As a result, it was revealed that a thermodynamically unstable indium species was produced only at a certain composition leading to a durable luminescent function. Such a phenomenon in subnanosized substances will play an important role in the development of the as-yet-unknown field of quantum materials.

Nickel platinum (Ni x Pt1-x ) nanoalloy monodisperse particles without the core-shell structure by colloidal synthesis

We report a new and versatile colloidal route towards the synthesis of nanoalloys with controlled size and chemical composition in the solid solution phase (without phase segregation such as core-shell structure or Janus structure) or chemical ordering. The principle of the procedure is based on the correlation between the oxidation-reduction potential of metal cations present in the precursors and the required synthesis temperature to nucleate particles without phase segregation. The procedure is demonstrated via the synthesis of Face Centered Cubic (FCC) Ni _x Pt_1-x nanoparticles, which was elaborated by the co-reduction of nickel(ii) acetylacetonate and platinum(ii) acetylacetonate with 1,2-hexadecanediol in benzyl ether, using oleylamine and oleic acid as surfactants. The chemical composition and solid solution FCC structure of the nanoalloy are demonstrated by crosslinking imaging and chemical analysis using transmission electron microscopy and X-ray diffraction techniques. Whatever the chemical composition inspected, a systematic expansion of the lattice parameters is measured in relation to the respective bulk counterpart.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Eutectic Synthesis of High-Entropy Metal Phosphides for Electrocatalytic Water Splitting

High-entropy materials, a new class of alloys that incorporate five or more principal elements into single-phase crystal structures, have received considerable interest in materials science and engineering. Considering the tailored composition and disordered configuration, these high-entropy materials may arouse functional synergism towards electrocatalysis. Here, a new strategy for preparing high-entropy metal phosphides (HEMPs) was developed by a eutectic solvent method. The as-prepared HEMP possessed a single metal phosphide phase with up to five homogenously distributed metal components. The versatile application of high-entropy materials was highlighted by integrating the HEMP catalyst into a two-electrode configuration for electrocatalytic water splitting.

Phase engineering of nanomaterials

Phase has emerged as an important structural parameter - in addition to composition, morphology, architecture, facet, size and dimensionality - that determines the properties and functionalities of nanomaterials. In particular, unconventional phases in nanomaterials that are unattainable in the bulk state can potentially endow nanomaterials with intriguing properties and innovative applications. Great progress has been made in the phase engineering of nanomaterials (PEN), including synthesis of nanomaterials with unconventional phases and phase transformation of nanomaterials. This Review provides an overview on the recent progress in PEN. We discuss various strategies used to synthesize nanomaterials with unconventional phases and induce phase transformation of nanomaterials, by taking noble metals and layered transition metal dichalcogenides as typical examples. Moreover, we also highlight recent advances in the preparation of amorphous nanomaterials, amorphous-crystalline and crystal phase-based hetero-nanostructures. We also provide personal perspectives on challenges and opportunities in this emerging field, including exploration of phase-dependent properties and applications, rational design of phase-based heterostructures and extension of the concept of phase engineering to a wider range of materials.

Pt-Co Alloy Nanoparticles on a γ-Al2 O3 Support: Synergistic Effect between Isolated Electron-Rich Pt and Co for Automotive Exhaust Purification

There is interest in minimizing or eliminating the use of Pt in catalysts by replacing it with more widely abundant and cost-effective elements. The alloying of Pt with non-noble metals is a potential strategy for reducing Pt use because interactions between Pt and non-noble metals can modify the catalyst structure and electronic properties. Here, a γ-Al₂ O₃ -supported bimetallic catalyst [Pt(0.1)Co(1)/Al₂ O₃ ] was prepared which contained 0.1 wt % Pt and 1 wt % Co and thus featured an extremely low Pt : Co ratio (<1 : 30 mol/mol). The Pt and Co in this catalyst formed alloy nanoparticles in which isolated electron-rich Pt atoms were present on the nanoparticle surface. The activity of this Pt(0.1)Co(1)/Al₂ O₃ catalyst for the purification of automotive exhaust was comparable to the activities of 0.3 and 0.5 wt % Pt/γ-Al₂ O₃ catalysts. Electron-rich Pt and metallic Co promoted activation of NO_x and oxidization of CO and hydrocarbons, respectively. This strategy of tuning the surrounding structure and electronic state of a noble metal by alloying it with an excess of a non-noble metal will enable reduced noble metal use in catalysts for exhaust purification and other environmentally important reactions.

Theoretical design of a technetium-like alloy and its catalytic properties

Based on the concept of density of states (DOS) engineering, we theoretically designed a pseudo-Tc material (Mo-Ru alloy) and investigated its electronic structure, phase stability and catalytic activity by using density functional theory. Through comparing the DOS shape, peak distribution, and DOS area differences between Tc and the Mo-Ru alloy, we noticed that bcc-Mo8Ru8 and hcp-Mo8Ru8 had the most similar electronic structures to Tc. The excess energies after entropy correction of hcp-Mo8Ru8 and bcc-Mo8Ru8 are stable when the temperature is up to 765 and 745 K, respectively. These results provided the possibility of pseudo-Tc alloy (hcp-Mo8Ru8 and bcc-Mo8Ru8) synthesis. Finally, according to reaction coordinate analysis, the similar catalytic activity between hcp-Mo8Ru8 and Tc have been demonstrated in CO oxidation and N2 dissociation. In N2 dissociation, Tc has a suitable ratio of transition state (TS) barrier to reaction energy which make Tc an efficient catalyst for NH3 synthesis, in addition to our designed pseudo-Tc (hcp-MoRu) because of the similar electronic structures. Our finding provides valuable insight into materials and catalyst design.

Solid-solution alloy nanoparticles of a combination of immiscible Au and Ru with a large gap of reduction potential and their enhanced oxygen evolution reaction performance

Au and Ru are elements that are immiscible in the bulk state and have the largest gap in reduction potential among noble metals. Here, for the first time, Au x Ru1-x solid-solution alloy nanoparticles (NPs) were successfully synthesized over the whole composition range through a chemical reduction method. Powder X-ray diffraction and scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy showed that Au and Ru atoms are homogeneously mixed at the atomic level. We investigated the catalytic performance of Au x Ru1-x NPs for the oxygen evolution reaction, for which Ru is well known to be one of the best monometallic catalysts, and we found that even alloying with a small amount of Au could significantly enhance the catalytic performance.

Hydrogen in Palladium and Storage Properties of Related Nanomaterials: Size, Shape, Alloying, and Metal-Organic Framework Coating Effects

One of the key issues for an upcoming hydrogen energy-based society is to develop highly efficient hydrogen-storage materials. Among the many hydrogen-storage materials reported, transition-metal hydrides can reversibly absorb and desorb hydrogen, and have thus attracted much interest from fundamental science to applications. In particular, the Pd-H system is a simple and classical metal-hydrogen system, providing a platform suitable for a thorough understanding of ways of controlling the hydrogen-storage properties of materials. By contrast, metal nanoparticles have been recently studied for hydrogen storage because of their unique properties and the degrees of freedom which cannot be observed in bulk, i. e., the size, shape, alloying, and surface coating. In this review, we overview the effects of such degrees of freedom on the hydrogen-storage properties of Pd-related nanomaterials, based on the fundamental science of bulk Pd-H. We shall show that sufficiently understanding the nature of the interaction between hydrogen and host materials enables us to control the hydrogen-storage properties though the electronic-structure control of materials.

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_x Ru_1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.

Emergence of high ORR activity through controlling local density-of-states by alloying immiscible Au and Ir

Although Ir or Au is not active for ORR, we first demonstrate highly active Au_0.5Ir_0.5 alloy by emulating Pt LDOS profile.

The electronic structure of surface atoms has a great effect on catalytic activity because the binding energy of reactants is closely related to the electronic structure. Therefore, designing and controlling the local density of states (LDOS) of the catalyst surface would be a rational way to develop innovative catalysts. Herein, we first demonstrate a highly active AuIr solid-solution alloy electrocatalyst for the oxygen reduction reaction (ORR) by emulating the Pt LDOS profile. The calculated LDOS of Ir atoms on the Au_0.5Ir_0.5(111) surface closely resembled that of Pt(111), resulting in suitable oxygen adsorption energy on the alloy surface for the ORR. We successfully synthesized AuIr solid-solution alloys, while Ir and Au are immiscible even above their melting points in the bulk state. Although monometallic Ir or Au is not active for the ORR, the synthesized Au_0.5Ir_0.5 alloy demonstrated comparable activity to Pt at 0.9 V versus a reversible hydrogen electrode.

Hollow nanoparticles as emerging electrocatalysts for renewable energy conversion reactions

While the realization of clean and sustainable energy conversion systems primarily requires the development of highly efficient catalysts, one of the main issues had been designing the structure of the catalysts to fulfill minimum cost as well as maximum performance. Until now, noble metal-based nanocatalysts had shown outstanding performances toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). However, the scarcity and high cost of them impeded their practical use. Recently, hollow nanostructures including nanocages and nanoframes had emerged as a burgeoning class of promising electrocatalysts. The hollow nanostructures could expose a high proportion of active surfaces while saving the amounts of expensive noble metals. In this review, we introduced recent advances in the synthetic methodologies for generating noble metal-based hollow nanostructures based on thermodynamic and kinetic approaches. We summarized electrocatalytic applications of hollow nanostructures toward the ORR, OER, and HER. We next provided strategies that could endow structural robustness to the flimsy structural nature of hollow structures. Finally, we concluded this review with perspectives to facilitate the development of hollow nanostructure-based catalysts for energy applications.

Atom-hybridization for synthesis of polymetallic clusters

The chemistry of metal clusters on the sub-nanometer scale is not yet well understood because metal clusters, especially multimetallic clusters, are difficult to synthesize with control over size and composition. The template synthesis of multimetallic sub-nanoclusters is achieved using a phenylazomethine dendrimer as a macromolecular template. Its intramolecular potential gradient allows the precise uptake of metal precursor complexes containing up to eight elements on the template. The usefulness of this method is demonstrated by synthesizing multimetallic sub-nanoclusters composed of five elements (Ga₁In₁Au₃Bi₂Sn₆). The size and composition of this cluster can be precisely controlled and the metals involved are alloyed with each other. This approach provides the ability to easily blend different metals in various combinations to create new materials on the sub-nanometer scale, which will lead to the development of a new area in the field of chemistry.

Multimetallic clusters are difficult to synthesize with control over elemental composition and organization. Here, the authors use dendrimers to precisely template the formation of five-element sub-nanoclusters, providing an elegant route to otherwise-inaccessible multinary compounds.

Double enhancement of hydrogen storage capacity of Pd nanoparticles by 20 at% replacement with Ir; systematic control of hydrogen storage in Pd-M nanoparticles (M = Ir, Pt, Au)

We report on binary solid-solution nanoparticles (NPs) composed of Pd and Ir, which are not miscible at the equilibrium state of the bulk, for the first time, by means of a process of hydrogen absorption/desorption from core (Pd)/shell (Ir) NPs. Only 20 at% replacement with Ir atoms doubled the hydrogen-storage capability compared to Pd NPs, which are a representative hydrogen-storage material. Furthermore, the systematic control of hydrogen concentrations and the corresponding pressure in Pd and Pd-M NPs (M = Ir, Pt, Au) have been achieved based on the band filling control of Pd NPs.