Dynamics of Linkers in Metal-Organic Framework Glasses

Metal-organic framework (MOF) glasses have emerged as a new class of organic-inorganic hybrid glass materials. Considerable efforts have been devoted to unraveling the macroscopic dynamics of MOF glasses by studying their rheological behavior; however, their microscopic dynamics remain unclear. In this work, we studied the effect of vitrification on linker dynamics in ZIF-62 by solid-state 2H nuclear magnetic resonance (NMR) spectroscopy. 2H NMR relaxation analysis provided a detailed picture of the mobility of the ZIF-62 linkers, including local restricted librations and a large-amplitude twist; these details were verified by molecular dynamics. A comparison of ZIF-62 crystals and glasses revealed that vitrification does not drastically affect the fast individual flipping motions with large-amplitude twists, whereas it facilitates slow cooperative large-amplitude twist motions with a decrease in the activation barrier. These observations support the findings of previous studies, indicating that glassy ZIF-62 retains permanent porosity and that short-range disorder exists in the alignment of ligands because of distortion of the coordination angle.

Reduction-Induced Uptake of Cs+ in Metal-Organic Frameworks Loaded with Polyoxometalates

Materials for Cs+ adsorption continue to be important for the treatment of various solutions. Metal-organic frameworks (MOFs) with large specific surface areas promise adsorption properties for various gases, vapors, and ions. However, the utilization of MOFs for alkali ion capture, specifically, Cs+ capture is still in its infancy. Herein, MOFs are hybridized with polyoxometalates (POMs) to study the effect of i) MOF type, ii) POM type, and iii) POM loading amounts on Cs+ capture. In particular, the composite of ZIF-8 and [α-PMo12 O40 ]3- (PMo12 /ZIF-8) adsorbed Cs+ ions effectively when compared to pristine ZIF-8. In addition, the reduction of Mo within the POM from MoVI to MoV by ascorbic acid during the Cs+ uptake process doubled the Cs+ uptake capacity of PMo12 /ZIF-8. This observation can be attributed to the increased overall negative charge of the POM facilitating Cs+ uptake to compensate for the charge imbalance. Hybridization with other MOFs (MIL-101 and UiO-66) largely suppresses the Cs+ uptake, highlighting the importance of hydrophobicity in Cs+ capture. Furthermore, PMo12 /ZIF-8 led to an outstanding Cs+ uptake (291.5 mg g-1 ) with high selectivity (79.6%) from quinary mixtures of alkali metal cations even among other representative porous materials (Prussian blue and zeolites).

Size-Controlled Synthesis of Luminescent Few-Atom Silver Clusters via Electron Transfer in Isostructural Redox-Active Porous Ionic Crystals

Ag clusters with a controlled number of atoms have received significant interest because they show size-dependent catalytic, optical, electronic, or magnetic properties. However, the synthesis of size-controlled, ligand-free, and air-stable Ag clusters with high yields has not been well-established. Herein, it is shown that isostructural porous ionic crystals (PICs) with redox-active polyoxometalates (POMs) can be used to synthesize Ag clusters via electron transfer from POMs to Ag⁺ . Ag clusters with average numbers of three, four, or six atoms emitting blue, green, or red colors, respectively, are formed and stabilized in the PICs under ambient conditions without any protecting ligands. The cluster size solely correlates with the degree of electron transfer, which is controlled by the reduction time and types of ions or elements of the PICs. Thus, advantages have been taken of POMs as electron sources and PICs as scaffolds to demonstrate a convenient method to obtain few-atom Ag clusters.

A redox-active inorganic crown ether based on a polyoxometalate capsule

Cation-uptake has been long researched as an important topic in materials science. Herein we focus on a molecular crystal composed of a charge-neutral polyoxometalate (POM) capsule [MoVI72FeIII30O252(H2O)102(CH3CO2)15]3+ encapsulating a Keggin-type phosphododecamolybdate anion [α-PMoVI12O40]3-. Cation-coupled electron-transfer reaction occurs by treating the molecular crystal in an aqueous solution containing CsCl and ascorbic acid as a reducing reagent. Specifically, multiple Cs+ ions and electrons are captured in crown-ether-like pores {MoVI3FeIII3O6}, which exist on the surface of the POM capsule, and Mo atoms, respectively. The locations of Cs+ ions and electrons are revealed by single-crystal X-ray diffraction and density functional theory studies. Highly selective Cs+ ion uptake is observed from an aqueous solution containing various alkali metal ions. Cs+ ions can be released from the crown-ether-like pores by the addition of aqueous chlorine as an oxidizing reagent. These results show that the POM capsule functions as an unprecedented "redox-active inorganic crown ether", clearly distinguished from the non-redox-active organic counterpart.

Polyoxocationic antimony oxide cluster with acidic protons

The success and continued expansion of research on metal-oxo clusters owe largely to their structural richness and wide range of functions. However, while most of them known to date are negatively charged polyoxometalates, there is only a handful of cationic ones, much less functional ones. Here, we show an all-inorganic hydroxyiodide [H_10.7Sb_32.1O₄₄][H_2.1Sb_2.1I₈O₆][Sb_0.76I₆]₂·25H₂O (HSbOI), forming a face-centered cubic structure with cationic Sb₃₂O₄₄ clusters and two types of anionic clusters in its interstitial spaces. Although it is submicrometer in size, electron diffraction tomography of HSbOI allowed the construction of the initial structural model, followed by powder Rietveld refinement to reach the final structure. The cationic cluster is characterized by the presence of acidic protons on its surface due to substantial Sb³⁺ deficiencies, which enables HSbOI to serve as an excellent solid acid catalyst. These results open up a frontier for the exploration and functionalization of cationic metal-oxo clusters containing heavy main group elements.

Evaluation of the nutrient foramen as a suitable landmark in spinal surgery

BACKGROUND CONTEXT

The posterior cervical approach is a very popular surgical procedure. Because of the slope-shaped laminae, a suitable landmark for laminectomy, laminoplasty, and pedicle screw placement does not exist.

PURPOSE

We investigated the association between the nutrient foramen and spinal canal, and the safety of bone gutter placement using nutrient foramina for safe and effective spinal surgery.

STUDY DESIGN

Observational SETTING: University Hospital PATIENT SAMPLES: Two hundred and sixty-six consecutive patients treated for cervical pathologies in our university hospital between January 2005 and December 2019.

OUTCOME MEASURES

We identified the location of nutrient foramina and their anatomical association with the spinal canal using preoperative three-dimensional CT scanning.

METHODS

We studied the distance between each foramen and the spinal canal, and the angle of the nutrient foramen at each vertebral level.

RESULTS

The nutrient foramina were always located outside the spinal canal, with an average distance of +3.06±1.74 mm. The lower the spinal level, the closer the nutrient foramen to the spinal canal.

CONCLUSIONS

The nutrient foramen can be considered a reliable landmark when using the posterior cervical approach.

Oxygen Evolution Reaction Driven by Charge Transfer from a Cr Complex to Co-Containing Polyoxometalate in a Porous Ionic Crystal

Considerable efforts have been devoted to developing oxygen evolution reaction (OER) catalysts based on transition metal oxides. Polyoxometalates (POMs) can be regarded as model compounds of transition metal oxides, and cobalt-containing POMs (Co-POMs) have received significant interest as candidates. Nanocomposites based on Co-POMs have been reported to show high OER activities due to synergistic effects among the components; however, the role of each component is unclear due to its complex structure. Herein, we utilize porous ionic crystals (PICs) based on Co-POMs, which enable a composition-structure-function relationship to be established to understand the origin of the synergistic catalysis. Specifically, a Keggin-type POM [α-CoW₁₂O₄₀]^6- and a Cr complex [Cr₃O(OOCCH₂CN)₆(H₂O)₃]⁺ are implemented as PIC building blocks for the OER under nonbasic conditions. The potentially OER-active but highly soluble [α-CoW₁₂O₄₀]^6- was successfully anchored in the crystalline PIC matrix via Coulomb interactions and hydrogen bonding induced by polar cyano groups of the Cr complex. The PIC exhibits efficient and sustained OER catalytic activity, while each building block is inactive. The Tafel slope of the linear sweep voltammetry curve and the relatively large kinetic isotope effect value suggest that elementary steps closely related to the OER rate involve single-electron and proton transfer reactions. Electrochemical and spectroscopic studies clearly show that the synergistic catalysis originates from the charge transfer from the Cr complex to [α-CoW₁₂O₄₀]^6-; the increased electron density of [α-CoW₁₂O₄₀]^6- may increase its basicity and accelerate proton abstraction as well as enhance electron transfer to stabilize the reaction intermediates adsorbed on [α-CoW₁₂O₄₀]^6-.

Basicity of Isostructural Porous Ionic Crystals Composed of Nb/Ta-Substituted Keggin-Type Polyoxotungstates

Three isostructural porous ionic crystals (PICs) based on Keggin-type POMs with different compositions but equal negative charge ([BW12O40]5– (BW12), [SiW11NbO40]5– (SiW11Nb), and [SiW11TaO40]5– (SiW11Ta)) are synthesized. Experimental and theoretical characterizations...

Vanadium-substituted polycationic Al-oxo cluster in a porous ionic crystal exhibiting Lewis acidity

A vanadium-substituted polycationic Al-oxo cluster (Al28V4) in an all-inorganic porous ionic crystal exhibits Lewis acidity.

Incorporating highly basic polyoxometalate anions comprising Nb or Ta into nanoscale reaction fields of porous ionic crystals

Polyoxometalates (POMs) are oxide cluster anions composed of high-valence early transition metals and are widely used as catalysts. Yet base catalysis of POMs remains an ongoing challenge; group V (V, Nb, and Ta) elements form more negatively charged POMs than group VI (Mo and W) elements, and in particular, polyoxoniobates and polyoxotantalates are known to show strong basicity in solution due to the highly negative surface oxygen atoms. Herein, we report for the first time porous ionic crystals (PICs) comprising Nb or Ta. The PICs are composed of Dawson-type Nb/W or Ta/W mixed-addenda POMs with oxo-centered trinuclear Cr^III carboxylates and potassium ions as counter cations to control the crystal structure. Among the PICs, those with Nb or Ta tri-substituted POMs exhibit the highest yield (78-82%) and selectivity (99%) towards the Knoevenagel condensation of benzaldehyde and ethyl cyanoacetate (353 K, 6 h), which is a typical base-catalyzed reaction, as reusable solid catalysts, and they can also catalyze the reaction of other active methylene compounds. A detailed investigation into the crystal structures together with DFT calculations and in situ IR spectroscopy with methanol as a basic probe molecule shows that the exposure of [Nb₃O₁₃] or [Ta₃O₁₃] units with highly negative surface oxygen atoms to the pore surface of PICs is crucial to the catalytic performance. These findings based on the composition-structure-function relationships show that Nb- and Ta-containing PICs can serve as platforms for rational designing of heterogeneous base catalysts.

Phase Control of Solid-Solution Nanoparticles beyond the Phase Diagram for Enhanced Catalytic Properties

The crystal structure, which intrinsically affects the properties of solids, is determined by the constituent elements and composition of solids. Therefore, it cannot be easily controlled beyond the phase diagram because of thermodynamic limitations. Here, we demonstrate the first example of controlling the crystal structures of a solid-solution nanoparticle (NP) entirely without changing its composition and size. We synthesized face-centered cubic (fcc) or hexagonal close-packed (hcp) structured Pd _x Ru_1-x NPs (x = 0.4, 0.5, and 0.6), although they cannot be synthesized as bulk materials. Crystal-structure control greatly improves the catalytic properties; that is, the hcp-Pd _x Ru_1-x NPs exceed their fcc counterparts toward the oxygen evolution reaction (OER) in corrosive acid. These NPs only require an overpotential (η) of 200 mV at 10 mA cm^-2, can maintain the activity for more than 20 h, greatly outperforming the fcc-Pd_0.4Ru_0.6 NPs (η = 280 mV, 9 min), and are among the most efficient OER catalysts reported. Synchrotron X-ray-based spectroscopy, atomic-resolution electron microscopy, and density functional theory (DFT) calculations suggest that the enhanced OER performance of hcp-PdRu originates from the high stability against oxidative dissolution.

Isomeric effects on the acidity of Al13 Keggin clusters in porous ionic crystals

We demonstrate a facile synthesis method of a porous ionic crystal (PIC) composed of the little-known δ-Keggin-type cationic polyoxoaluminum cluster ([δ-Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺, δ-Al₁₃) with an oppositely-charged polyoxometalate, which enabled us to investigate the activity as a solid acid. The δ-Al₁₃ based PIC exhibited much higher activity in pinacol rearrangement, a typical acid-catalyzed reaction, than the PIC based on the well-known and thermodynamically stable rotational isomer (ε-Al₁₃). This work is a rare example of rotational isomers of polyoxoaluminum clusters exhibiting remarkably different catalytic activities.

Fabrication of Integrated Copper-Based Nanoparticles/Amorphous Metal-Organic Framework by a Facile Spray-Drying Method: Highly Enhanced CO2 Hydrogenation Activity for Methanol Synthesis

We report on Cu/amUiO-66, a composite made of Cu nanoparticles (NPs) and amorphous [Zr₆ O₄ (OH)₄ (BDC)₆ ] (amUiO-66, BDC=1,4-benzenedicarboxylate), and Cu-ZnO/amUiO-66 made of Cu-ZnO nanocomposites and amUiO-66. Both structures were obtained via a spray-drying method and characterized using high-resolution transmission electron microscopy, energy dispersive spectra, powder X-ray diffraction and extended X-ray absorption fine structure. The catalytic activity of Cu/amUiO-66 for CO₂ hydrogenation to methanol was 3-fold that of Cu/crystalline UiO-66. Moreover, Cu-ZnO/amUiO-66 enhanced the methanol production rate by 1.5-fold compared with Cu/amUiO-66 and 2.5-fold compared with γ-Al₂ O₃ -supported Cu-ZnO nanocomposites (Cu-ZnO/γ-Al₂ O₃ ) as the representative hydrogenation catalyst. The high catalytic performance was investigated using in situ Fourier transform IR spectra. This is a first report of a catalyst comprising metal NPs and an amorphous metal-organic framework in a gas-phase reaction.

Integrating molecular design and crystal engineering approaches in non-humidified intermediate-temperature proton conductors based on a Dawson-type polyoxometalate and poly(ethylene glycol) derivatives

Anionic metal-oxygen clusters known as polyoxometalates (POMs) have been widely researched as components of proton conductors. While proton conduction under non-humidified intermediate-temperature (100-250 °C) conditions is advantageous from the viewpoint of kinetics, few solid-state materials, not to mention POM-based crystals, show truly effective proton conduction without the aid of water vapor. In this context, non-volatile proton-conductive polymers have been confined into POM-based frameworks, while fast proton conduction was infeasible. Herein, we demonstrate a new strategy to synthesize POM-polymer composites exhibiting fast proton conduction under non-humidified intermediate-temperature conditions. Specifically, a molecular design approach utilizing poly(ethylene glycol)s (PEGs) of different terminal groups or chain lengths controls the proton carrier density, and a crystal engineering approach using a large Dawson-type POM ([α-P₂W₁₈O₆₂]^6-) with an anisotropic molecular shape and alkali metal ions as counter cations fine-tunes the mobility of the confined PEGs as proton carriers. By integrating these approaches, proton conductivity over 10^-4 S cm^-1 at 150 °C, comparable to the well-known highly proton-conductive solid-state materials, is achieved. The proton conduction mechanism is discussed with alternative current impedance spectroscopy jointly with specific heat capacity measurements and solid-state NMR spectroscopy.

Ultrahigh Proton Conduction via Extended Hydrogen-Bonding Network in a Preyssler-Type Polyoxometalate-Based Framework Functionalized with a Lanthanide Ion

The exploration of composition-structure-function relationship in proton-conducting solids remains a challenge in materials chemistry. Polyoxometalate-based compounds have been long considered as candidates for proton conductors; however, their low structural stability and a large decrease in conductivity under reduced relative humidity (RH) have limited their applications. To overcome such limitations, the hybridization of polyoxometalates with proton-conducting polymers has emerged as a promising method. Besides, 4f lanthanide ions possess a high coordination number, which can be utilized to attract water molecules and to build robust frameworks. Herein, a Preyssler-type polyoxometalate functionalized with a 9-coordinate Eu³⁺ (Eu[P₅W₃₀O₁₁₀K]^11-) is newly synthesized and combined with poly(allylamine) with amine moieties as protonation sites. The resulting robust crystalline composite exhibits an ultrahigh proton conductivity >10^-2 S cm^-1 at 368 K and 90% RH, which is still >10^-3 S cm^-1 at 50% RH, due to the strengthened and extended hydrogen-bonding network.

Eosinophilic Cholecystitis Associated with Eosinophilic Granulomatosis with Polyangiitis

We report a case of eosinophilic cholecystitis associated with eosinophilic granulomatosis with polyangiitis (EGPA) complicated by cerebral hemorrhage. A 60-year-old man presented to a local hospital with a diagnosis of acute cholecystitis, with persistent fever and epigastric pain for 2 weeks. His symptoms persisted despite 3-week hospitalization; therefore, he was transferred to our hospital for further evaluation. Laboratory investigations upon admission showed white blood cells 26,300/µL and significant eosinophilia (eosinophils 61%). Abdominal computed tomography revealed no gallbladder enlargement but a circumferentially edematous gallbladder wall. Additional blood test results were negative for antineutrophil cytoplasmic and perinuclear antineutrophil cytoplasmic antibodies; however, immunoglobulin (Ig)G and IgE levels were high at 1,953 mg/dL and 3,040/IU/mL, respectively. He improved following endoscopic transnasal gallbladder drainage for cholecystitis and was diagnosed with EGPA and received corticosteroid and immunosuppressant combination therapy. The eosinophil count decreased immediately after treatment, and abdominal pain and numbness resolved. He returned with left-sided suboccipital hemorrhage likely attributed to EGPA 6 months after discharge. EGPA is characterized by inflammation of small blood vessels and clinically manifests with an allergic presentation of bronchial asthma, as well as renal dysfunction, interstitial pneumonia, enteritis, and cerebral hemorrhage. Few reports have described cholecystitis as a presenting symptom of EGPA. We report a rare case of such a presentation with added considerations.

Crystalline to amorphous transformation in solid-solution alloy nanoparticles induced by boron doping

We synthesized a palladium-ruthenium-boron (Pd-Ru-B) solid-solution ternary alloy. Elemental mappings confirmed successful alloying of B with Pd-Ru body without changing the particle sizes, demonstrating the first discovery of this ternary alloy. Pair distribution function analysis revealed a drastic decrease in atomic correlation in Pd-Ru nanoparticles by B doping. This result gives the first example of structural transformation from crystalline to amorphous in solid-solution alloy nanoparticles induced by the doping of light elements.

Isostructural mesoporous ionic crystals as a tunable platform for acid catalysis

Eleven isostructural mesoporous ionic crystals (meso-PICs) are synthesized. The initial activities of the Barbier-Grignard reaction, which is a typical C-C bond formation reaction, catalyzed by the meso-PICs are dependent on the acid dissociation constant of the aqua ions of Mn+ and the types of polyoxometalates, which construct the meso-PICs.

Probing dynamics of carbon dioxide in a metal-organic framework under high pressure by high-resolution solid-state NMR

The application of high-resolution NMR analysis for CO2 adsorbed in a MOF under high pressure is reported for the first time. The results showed that CO2 adsorbed in MOF-74 had an unusually slow mobility (τ ∼ 10-8 s). CO2-CO2 interactions suppressed the mobility of CO2 under high pressure, which, in turn, would have contributed to the stability of CO2 at the adsorption sites.

Ligand-Functionalization-Controlled Activity of Metal-Organic Framework-Encapsulated Pt Nanocatalyst toward Activation of Water

We first report the systematic control of the reactivity of H₂O vapor in metal-organic frameworks (MOFs) with Pt nanocrystals (NCs) through ligand functionalization. We successfully synthesized Pt NCs covered with a water-stable MOF, UiO-66 (Pt@UiO-66), having different metal ions or functionalized ligands. The ligand functionalization of UiO-66 significantly affected the catalytic performance of the water-gas shift reaction, and the replacement of Zr⁴⁺ ions with Hf⁴⁺ ions in UiO-66 had no impact on the catalytic activity. The introduction of a -Br group lowered the reactivity of Pt@UiO-66 by nearly half, whereas the substitution of -Br with a -Me₂ group triply enhanced the activity. The origin of the enhanced catalytic activity was found to be the change in H₂O activity in the UiO-66 pores by the ligand functionalization, which was investigated using H₂O sorption, solid-state NMR, X-ray photoelectron spectroscopy, and in situ IR measurements. This work opens a new prospect to develop MOFs as a platform to activate H₂O.

Missing-linker metal-organic frameworks for oxygen evolution reaction

Metal-organic frameworks (MOFs) have been recognized as compelling platforms for the development of miscellaneous applications because of their structural diversity and functional tunability. Here, we propose that the electrocatalytic properties could be well modified by incorporating missing linkers into the MOF. Theoretical calculations suggest the electronic structure of MOFs can be tuned by introducing missing linkers, which improves oxygen evolution reaction (OER) performance of the MOF. Inspired by these aspects, we introduced various missing linkers into a layered-pillared MOF Co₂(OH)₂(C₈H₄O₄) (termed as CoBDC) to prepare missing-linker MOFs. Transmission electron microscope and synchrotron X-ray measurements confirmed that the missing linkers in the MOF could be introduced and well controlled by our strategy. The self-supported MOF nanoarrays with missing linkers of carboxyferrocene exhibit excellent OER performance with ultralow overpotential of 241 mV at 100 mA cm⁻². This work opens a new prospect to develop efficient MOF-based electrocatalysts by introducing missing linkers.

While water splitting electrocatalysis provides a means to store electrical energy as fuel, the water oxidation catalysts typically show low performances. Here, authors employ metal-organic frameworks with missing-linkers as highly active oxygen evolution electrocatalysts.

Solid-solution alloy nanoparticles of a combination of immiscible Au and Ru with a large gap of reduction potential and their enhanced oxygen evolution reaction performance

Au and Ru are elements that are immiscible in the bulk state and have the largest gap in reduction potential among noble metals. Here, for the first time, Au x Ru1-x solid-solution alloy nanoparticles (NPs) were successfully synthesized over the whole composition range through a chemical reduction method. Powder X-ray diffraction and scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy showed that Au and Ru atoms are homogeneously mixed at the atomic level. We investigated the catalytic performance of Au x Ru1-x NPs for the oxygen evolution reaction, for which Ru is well known to be one of the best monometallic catalysts, and we found that even alloying with a small amount of Au could significantly enhance the catalytic performance.

Charge transfer dependence on CO2 hydrogenation activity to methanol in Cu nanoparticles covered with metal-organic framework systems

We report the charge transfer dependence on CO₂ hydrogenation activity to methanol in Cu nanoparticles covered with metal–organic framework systems.

We report the synthesis and characterization of highly active Cu nanoparticles covered with zirconium/hafnium-based metal–organic frameworks for CO₂ hydrogenation to methanol. Compared to Cu/γ-Al₂O₃, Cu/ZIF-8, Cu/MIL-100 and Cu/UiO-66 composites, UiO-66 acts as the most active support, with Cu/Zr-UiO-66 producing methanol at a rate 70 times higher than that of Cu/γ-Al₂O₃. In addition, the replacement of Zr⁴⁺ with Hf⁴⁺ in UiO-66 tripled in the rate of methanol production. Furthermore, we describe a substituent effect on the catalytic activity, with Cu/Zr-UiO66-COOH providing a three-fold enhancement of methanol production, compared to that of Zr-UiO-66 or Zr-UiO66-NH₂. The enhanced catalytic activity of Cu nanoparticles depends on the charge transfer degree from Cu nanoparticles to UiO-66 at the interface between Cu nanoparticles and UiO-66.

The effect of amorphization on the molecular motion of the 2-methylimidazolate linkers in ZIF-8

We investigated the effect of amorphization on the mobility of the organic linkers in a metal–organic framework.

Sequence-regulated copolymerization based on periodic covalent positioning of monomers along one-dimensional nanochannels

The design of monomer sequences in polymers has been a challenging research subject, especially in making vinyl copolymers by free-radical polymerization. Here, we report a strategy to obtain sequence-regulated vinyl copolymers, utilizing the periodic structure of a porous coordination polymer (PCP) as a template. Mixing of Cu2+ ion and styrene-3,5-dicarboxylic acid (S) produces a PCP, [Cu(styrene-3,5-dicarboxylate)] n , with the styryl groups periodically immobilized along the one-dimensional channels. After the introduction of acrylonitrile (A) into the host PCP, radical copolymerization between A and the immobilized S is performed inside the channel, followed by decomposing the PCP to isolate the resulting copolymer. The predominant repetitive SAAA sequence in the copolymer is confirmed by monomer composition, NMR spectroscopy and theoretical calculations. Copolymerization using methyl vinyl ketone also provides the same type of sequence-regulated copolymer, showing that this methodology has a versatility to control the copolymer sequence via transcription of PCP periodicity at the molecular level.

Mechanical Alloying of Metal-Organic Frameworks

The solvent-free mechanical milling process for two distinct metal-organic framework (MOF) crystals induced the formation of a solid solution, which is not feasible by conventional solution-based syntheses. X-ray and STEM-EDX studies revealed that performing mechanical milling under an Ar atmosphere promotes the high diffusivity of each metal ion in an amorphous solid matrix; the amorphous state turns into the porous crystalline structure by vapor exposure treatment to form a new phase of a MOF solid solution.

Imidazolium cation transportation in a 1-D coordination polymer

We synthesized a coordination polymer, [EtMeIm][Cu(bpy)(Me₂PO₄)₃], containing an anionic 1-D chain and an ethyl methyl imidazolium cation.

Crystal engineering of a family of hybrid ultramicroporous materials based upon interpenetration and dichromate linkers

A new family of 2-fold interpenetrated primitive cubic (pcu) networks of formula [M(L)2(Cr2O7)] n (M = Co2+, Ni2+, Cu2+ and Zn2+; L = 4,4'-azopyridine), DICRO-3-M-i, has been synthesised and their structures, permanent porosity and gas sorption properties were comprehensively characterised. Molecular simulations indicate that CO2 molecules occupy both of the two distinct ultramicropores that run through this isostructural series. The orientation of the Cr2O72- pillars is thought to contribute to high isosteric enthalpy of adsorption (Qst) towards CO2 and temperature programmed desorption experiments reveal that DICRO-3-Ni-i selectively adsorbs CO2 from gas mixtures that simulate flue gas. Performance in this context is among the highest for physisorbents measured to date and these materials are readily regenerated at 50 °C.

Control of molecular rotor rotational frequencies in porous coordination polymers using a solid-solution approach

Rational design to control the dynamics of molecular rotors in crystalline solids is of interest because it offers advanced materials with precisely tuned functionality. Herein, we describe the control of the rotational frequency of rotors in flexible porous coordination polymers (PCPs) using a solid-solution approach. Solid-solutions of the flexible PCPs [{Zn(5-nitroisophthalate)x(5-methoxyisophthalate)1-x(deuterated 4,4'-bipyridyl)}(DMF·MeOH)]n allow continuous modulation of cell volume by changing the solid-solution ratio x. Variation of the isostructures provides continuous changes in the local environment around the molecular rotors (pyridyl rings of the 4,4'-bipyridyl group), leading to the control of the rotational frequency without the need to vary the temperature.

Periorbital Cyst with Bone Defect in a Dog

A 4-year-old female Miniature Dachshund was referred with a chief complaint of right periorbital swelling that had not responded to antibiotic therapy. Ultrasonography and fine-needle aspiration revealed that the periorbital lesion had a cystic structure without any inflammatory or neoplastic cells. Computed tomography (CT) showed that the cyst occupied a defect in the periorbital maxillary, lacrimal, and frontal bones and had invaded the nasal cavity. The lesion was histologically suspected by incisional biopsy as an epithelial cyst.

Morphological analysis of leucocyte transmigration in the pleural cavity

The role that pleural mesothelial cells play in leucocyte transmigration into the pleural cavity was investigated in lipopolysaccharide-stimulated mice. Changes in mesothelial cell morphology and changes in expression of adhesion molecules on mesothelial cells and leucocytes were analysed by light microscopy, immunohistochemistry, transmission electron microscopy (TEM) and immuno-scanning electron microscopy (immuno-SEM). After stimulation, the mesothelial cells separated completely from one another before leucocyte penetration across the mesothelial layer occurred. These changes occurred primarily in the immediate vicinity of ribs, where a large number of leucocytes accumulated. Immuno-SEM showed that the expression of intercellular adhesion molecule-1 (ICAM-1) on the parietal pleural mesothelial cells was significantly up-regulated by lipopolysaccharide stimulation, and that of vascular cell adhesion molecule-1 (VCAM-1) was induced. Both were restricted to the microvilli of the mesothelial cells. By contrast, expression of intercellular adhesion molecule-2 (ICAM-2), platelet/endothelial cell adhesion molecule-1 (PECAM-1), mucosal addressin cell adhesion molecule-1 (MAdCAM-1), endothelial leucocyte adhesion molecule-1 (ELAM-1), peripheral node addressin (PNAd) and fibronectin were not detected. Lymphocyte function associated antigen-1 (LFA-1), macrophage-1 molecule (Mac-1) and very late appearing antigen-4 (VLA-4), all ligands of ICAM-1 and VCAM-1, were present on the transmigrated neutrophils and macrophages. These findings demonstrate that the immediate vicinity of ribs is a source of leucocyte migration into the pleural space.

Spatial distribution of cell adhesion molecules on the peritoneal surface in the cecal perforation-induced peritonitis

For understanding the immunological functions of the peritoneum, spatial localization of integrins and their ligands was studied by immuno-SEM on the peritoneal surface of mice with cecal perforation-induced peritonitis. The cecal peritoneum 24 hr after perforation was stained with specific antibodies against LFA-1, Mac-1, VLA-4, ICAM-1, VCAM-1, and fibronectin diluted with cold University of Wisconsin (UW) solution in conjunction with immuno-gold labeling. The spatial localization of those cell adhesion molecules was detected by backscatter electron (BSE) imaging with field emission scanning electron microscope (FESEM). Numerous leukocytes with diverse surface ultrastructure were observed on the peritoneal surface by FESEM. Some leukocytes were in contact with mesothelial cells, and others adhered to the exposed underlying connective tissue. The BSE imaging showed the ubiquitous distribution of Mac-1 on all membrane domains of leukocytes, i.e., cell body, ruffles, and microvilli. In contrast, predominant expressions of LFA-1 and VLA-4 were discernible on ruffles/microvilli of some leukocytes. The mesothelial cells remaining in the inflamed area expressed both ICAM-1 and VCAM-1 on their microvilli. The fibronectin was detected on presumable collagen fibers and/or fibrin over the exposed smooth muscle layer as well as on fibrin extending between leukocyte aggregation. The spatial microlocalization of integrins was clarified on the leukocytes emigrated in peritonitis, and their ligands were detected on the inflamed peritoneum.

Expression of adhesion molecules and fibronectin of activated peritoneal surface with lipopolysaccharide (LPS) analyzed with immuno SEM

To disclose cell-to-cell interaction associated with the defensive mechanism of the peritoneum, the peritoneum was stimulated with lipopolysaccharide (LPS) and analyzed three-dimensionally, ultrastructurally, and immunohistochemically with immunoSEM (scanning electron microscopy). The activated hepatic peritoneal surface demonstrated numerous microvilli with the adhesion molecules ICAM-1 and VCAM-1. They were restricted to villi and peaked at 1.5 microg/g body weight of LPS. Delicate strands appeared moderately and were interwoven among microvilli with increasing LPS. These strands did not express ICAM-1 or VCAM-1, but fibronectin. Leukocytes began to adhere to the peritoneal surface above die value of LPS (2.5 microg). These results suggest that the peritoneal surface gives a defensive sheet for cell-to-cell interaction through adhesion molecules and fibronectin.

Peroxisomes in permanent and provisional kidneys. Phylogenic and ontogenic considerations

Peroxisomes in three forms of vertebrate kidney (pronephros, mesonephros, and metanephros), as permanent or provisional kidney, are summarized concerning their ultrastructure and developmental changes. Because the peroxisome is known to be diverse in mammalian metanephros, and species difference is its distinctive feature among cell organelles, information should be obtained on each kidney of each species. The ultrastructural and biochemical features of peroxisomes have at least been partly delineated in the metanephros and mesonephros, but nothing is known about the pronephros. Ultrastructural studies of the metanephric peroxisomes are present in mammals, birds, and reptiles, but information on their development is restricted to mammals and birds. As for the mesonephric peroxisomes, both ultrastructural and developmental data have been accumulating on mammals and amphibians, and ultrastructural information is present on fishes, but not on birds and reptiles. At present, studies on peroxisomes of provisional kidney have been restricted to mammalian mesonephros. The common features of renal peroxisomes previously examined are that they are spherical cell organelles with a single limiting membrane in ultrastructure, and are positive for catalase. Information on the ultrastructure and enzymes is not sufficient at present for comparing the ontogenesis of renal peroxisomes with their phylogenesis.