Mononuclear Cu-O2 complexes: geometries, spectroscopic properties, electronic structures, and reactivity

Recent advances in computational studies on Cu-catalyzed aerobic reactions: cooperation of copper catalysts and dioxygen

O2, one of the ideal oxidants, suffers from low solubility, low oxidizability, low selectivity and a triplet ground state when applied in organic synthesis. Biomimetic copper catalysis has been demonstrated to be a powerful method for activating and transforming O2 to conduct aerobic reactions for a long time. On the other hand, the structures of Cu-O2 complexes are complex with diverse downstream reactions, whereas active copper intermediates were rarely identified by experimental methods, making the mechanisms of many Cu-catalyzed aerobic reactions far from clear. In this context, computational studies emerged as an effective alternative to mechanistic studies on Cu-catalyzed aerobic reactions. This review introduces the relevant computational studies since 2012, focusing on showing the cooperation of copper catalysts and O2 in dehydrogenation, oxygenation and coupling reactions.

Ligand Degradation Study of Unsymmetrical β-Diketiminato Copper Dioxygen Adducts: The Length Chelating Arm Effect

An investigation on the reactivity of O₂ binding to unsymmetrical β-diketiminato copper(I) complexes by spectroscopic and titration analysis was performed. The length of chelating pyridyl arms (pyridylmethyl arm vs pyridylethyl arm) leads to the formation of mono- or di-nuclear copper-dioxygen species at -80 °C. The pyridylmethyl arm adduct (L₁CuO₂) forms mononuclear copper-oxygen species and shows ligand degradation, resulting in the formation of (2E,3Z)-N-(2,6-diisopropylphenyl)-4-(((E)-pyridin-2-ylmethylene)amino)pent-3-en-2-imine, which slowly converts to its cyclization isomer 1-(2,6-diisopropylphenyl)-4,6-dimethyl-2-(pyridin-2-yl)-1,2-dihydropyrimidine after addition of NH₄OH at room temperature. On the other hand, the pyridylethyl arm adduct [(L₂Cu)₂(μ-O)₂] forms dinuclear species at -80 °C and does not show any ligand degradation product. Instead, free ligand formation was observed after the addition of NH₄OH. These experimental observations and product analysis results indicate that the chelating length of pyridyl arms governs the Cu/O₂ binding ratio and the ligand degradation behavior.

Reversible Dioxygen Binding to Co(II) Complexes with Noninnocent Ligands

A series of mononuclear Co(II) complexes with noninnocent (redox-active) ligands are prepared that exhibit metal-ligand cooperativity during the reversible binding of O2. The complexes have the general formula, [CoII(LS,N)(TpR2)] (R = Me, Ph), where LS,N is a bidentate o-aminothiophenolate and TpR2 is a hydrotris(pyrazol-1-yl)borate scorpionate with R-substituents at the 3- and 5-positions. Exposure to O2 at room temperature results in one-electron oxidation and deprotonation of LS,N. The oxidized derivatives possess substantial "singlet diradical" character arising from antiferromagnetic coupling between an iminothiosemiquinonate (ITSQ•-) ligand radical and a low-spin Co(II) ion. The [CoII(TpMe2)(X2ITSQ)] complexes, where X = H or tBu, coordinate O2 reversibly at reduced temperatures to provide Co/O2 adducts. The O2 binding reactions closely resemble those previously reported by our group (Kumar et al., J. Am. Chem. Soc. 2019,141, 10984-10987) for the related complexes [CoII(TpMe2)(tBu2SQ)] and [CoII(TpMe2)(tBu2ISQ)], where tBu2(I)SQ represents 4,6-di-tert-butyl-(2-imino)semiquinonate radicals. In each case, the oxygenation reaction proceeds via the addition of O2 to both the cobalt ion and the ligand radical, generating metallocyclic cobalt(III)-alkylperoxo structures. Thermodynamic measurements elucidate the relationship between O2 affinity and redox potentials of the (imino)(thio)semiquinonate radicals, as well as energetic differences between these reactions and conventional metal-based oxygenations. The results highlight the utility and versatility of noninnocent ligands in the design of O2-absorbing compounds.

Cu-Ce oxide Co-loaded silicon nanocapsules for hydrogen peroxide self-supplied Fenton-like catalysis and synergistically antibacterial therapy

Antibacterial strategies based on reactive oxygen species (ROS) have opened up a new avenue for overcoming the great challenges of antibiotics topic including lack of broad-spectrum antibiotics and the emergence of super-resistant bacteria. Herein, we leveraged a strategy of constructing synergistic catalytic active sites to develop a simple yet efficient Fenton-like active nanocomposite, and investigated its catalysis mechanism and antibacterial performance thoroughly. This strategy provides a new direction for boosting the catalytic activity of nanocomposite catalysts for wide application. Specifically, by uniformly loading copper oxide and ceria onto the surface of silica nanocapsules (SiO₂ NCs), we fabricated a bimetallic oxide nanocomposite Cu_0.75Ce_0.62O₂@SiO₂ NC, which performed superior Fenton-like capability in a wide pH range without additional exogenetic hydrogen peroxide (H₂O₂). Such excellent catalytic activity was originated from the charge interaction between the two metal oxide components, where formation of Cu⁺ and oxygen vacancies (OVs) was mutually reinforcing, resulting in a synergistic effect to produce H₂O₂ and catalyze the generation of •OH under the slight acid condition (pH = 6.0). In view of the outstanding Fenton-like activity, the Cu_0.75Ce_0.62O₂@SiO₂ NC was employed in antimicrobial testing, which demonstrated exceptional high in vitro antimicrobial efficacy against both the S. aureus and E. coli in a neutral environment (pH = 7.4). The excellent performance of the bimetallic nanocomposite Cu_0.75Ce_0.62O₂@SiO₂ NC, including its facile and mild preparation, high water-solubility and stability, superior catalytic and antimicrobial performances, manifests a promising broad-spectrum antibiotic that can be anticipated to deal with the contamination of the environment by bacteria.

Exploring the Reaction Mechanism of C-H Oxidation by Copper-Salen Complexes

The mechanism of C-H oxidation of propylene (C₃H₆) and 1-phenyl-1-pentyne (C₃H₇-C≡C-Ph) by HOOR (R═Me, ^tBu) and ³O₂ by a copper-salen complex was explored by computations. The most noteworthy step is the complexation of two Cu salens to the peroxide to form either the LCuOH/LCuOR pair or an OH-bridged complex LCu(μ-OH)CuL plus OR. The latter pathway involves an avoided crossing of two triplet electronic states. The LCuOH complex can abstract a hydrogen atom from C₃H₆ and the C₃H₅ radical plus ³O₂ forms the complex LCuOOC₃H₅. Migration of a hydrogen to the proximal oxygen atom reforms LCuOH and acrolein HC(O)CH═CH₂.

Direct Benzene Hydroxylation with Dioxygen Induced by Copper Complexes: Uncovering the Active Species by DFT Calculations

The direct oxidation of benzene into phenol using molecular oxygen at very mild temperatures can be promoted in the presence of the copper complex Tp^Br3Cu(NCMe) in the homogeneous phase in the presence of ascorbic acid as the source of protons and electrons. The stoichiometric nature, relative to copper, of this transformation prompted a thorough DFT study in order to understand the reaction pathway. As a result, the dinuclear species Tp^Br3Cu^II(μ-O^•)(μ-OH)Cu^IITp^Br3 is proposed as the relevant structure which is responsible for activating the arene C–H bond leading to phenol formation.

Triphenyllead Hydroperoxide: A 1D Coordination Peroxo Polymer, Single-Crystal-to-Single-Crystal Disproportionation to a Superoxo/Hydroxo Complex, and Application in Catalysis

The synthesis, transformation, and application in catalysis of triphenyllead hydroperoxide, the first dioxygen lead complex, are described. Triphenyllead hydroperoxide is characterized by ²⁰⁷Pb nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and single-crystal X-ray diffraction, revealing the first one-dimensional (1D) coordination peroxo polymer. Photolytic isomorphous transformation of Ph₃PbOOH yields a mixed hydroxo/superoxo crystalline structure, the first nonalkali superoxo crystalline metal salt, which is stable up to 100 °C. Upon further photolysis, another isomorphous transformation of the superoxide to hydroxide is observed. These are the first single-crystal-to-single-crystal hydroperoxide-to-superoxide and then to hydroxide transformations reported to date. Photolysis of triphenyllead hydroperoxide yields two forms of superoxide-doped crystalline structures that are distinguished by widely different characteristic relaxation times. The use of Ph₃PbOOH as an easy-to-handle solid two-electron oxidant for the highly enantioselective epoxidation of olefins is described.

Effect of the ring size of TMC ligands in controlling C-H bond activation by metal-superoxo species

Metal-superoxo species play a very important role in many metal-mediated catalytic transformation reactions. Their catalytic reactivity is affected by many factors such as the nature of metal ions and ring size of ligands. Herein, for the first time, we report DFT calculations on the electronic structures of a series of metal-superoxo species (M = V, Cr, Mn, Fe, and Co) with two ring size ligands, i.e., 13-TMC/14-TMC, and a detailed mechanistic study on the C-H bond activation of cyclohexa-1,4-diene followed by the effect of the ring size of ligands. Our DFT results showed that the electron density at the distal oxygen plays an important role in C-H bond activation. By computing the energetics of C-H bond activation and mapping the potential energy surface, it was found that the initial hydrogen abstraction is the rate-determining step with both TMC rings and all the studied metal-superoxo species. The significant electron density at the cyclohex-1,4-diene carbon indicates that the reaction proceeds via the proton-coupled electron transfer mechanism. By mapping the potential energy surfaces, we found that the 13-TMC ligated superoxo with the anti-isomer are more reactive than the 14-TMC superoxo species except for the iron-superoxo species where the 14-TMC ligated superoxo species is more reactive i.e. smaller ring size TMC is more reactive towards C-H bond activation. This is also supported by the structural correlation, i.e., the greater contraction in the smaller ring results in the metal being pushed out of plane along the z-axis, which reduces the steric hindrance. Thus, the ring size can help in designing catalysts with better efficiency for catalytic reactions.

DFT Mechanistic Insights into Aldehyde Deformylations with Biomimetic Metal-Dioxygen Complexes: Distinct Mechanisms and Reaction Rules

Aldehyde deformylations occurring in organisms are catalyzed by metalloenzymes through metal-dioxygen active cores, attracting great interest to study small-molecule metal-dioxygen complexes for understanding relevant biological processes and developing biomimetic catalysts for aerobic transformations. As the known deformylation mechanisms, including nucleophilic attack, aldehyde α-H-atom abstraction, and aldehyde hydrogen atom abstraction, undergo outer-sphere pathways, we herein report a distinct inner-sphere mechanism based on density functional theory (DFT) mechanistic studies of aldehyde deformylations with a copper (II)-superoxo complex. The inner-sphere mechanism proceeds via a sequence mainly including aldehyde end-on coordination, homolytic aldehyde C-C bond cleavage, and dioxygen O-O bond cleavage, among which the C-C bond cleavage is the rate-determining step with a barrier substantially lower than those of outer-sphere pathways. The aldehyde C-C bond cleavage, enabled through the activation of the dioxygen ligand radical in a second-order nucleophilic substitution (S_N2)-like fashion, leads to an alkyl radical and facilitates the subsequent dioxygen O-O bond cleavage. Furthermore, we deduced the rules for the reactions of metal-dioxygen complexes with aldehydes and nitriles via the inner-sphere mechanism. Expectedly, our proposed inner-sphere mechanisms and the reaction rules offer another perspective to understand relevant biological processes involving metal-dioxygen cores and to discover metal-dioxygen catalysts for aerobic transformations.

Construction of Electrochemical and Photoelectrochemical Sensing Platform Based on Porphyrinic Metal-Organic Frameworks for Determination of Ascorbic Acid

Highly sensitive and specific detection of biomolecular markers is of great importance to the diagnosis and treatment of related diseases. Herein, Cu-TCPP@MOFs thin films were synthesized with tetrakis(4-carboxyphenyl) porphyrin (H₂TCPP) as organic ligands and copper ions as metal nodes. The as-synthesized Cu-TCPP@MOFs thin films as electrode modifiers were used to modify the pre-treated glassy carbon electrode (GCE) and the electrochemical performances of Cu-TCPP@MOFs/GCE were evaluated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Furthermore, as the working electrode, the constructed Cu-TCPP@MOFs/GCE was used for the investigation of ascorbic acid (AA) due to its outstanding electrocatalytic activities towards AA by several electrochemical methods, including cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry (CA). The well-linear relationship was established based on different AA concentration ranges and the ideal detection limits (LOD) were obtained in the above-mentioned electrochemical methods, respectively. Furthermore, a Cu-TCPP MOFs@GCE sensing platform was used as a photoelectrochemical (PEC) sensor to quantitatively detect AA based on the strong absorption properties of Cu-TCPP ingredients in Cu-TCPP MOFs in a visible light band of 400~700 nm. PEC sensing platform based on Cu-TCPP@MOFs exhibited a more extensive linear concentration range, more ideal detection limit, and better sensitivity relative than the other electrochemical methods for AA. The well linear regression equations were established between the peak current intensity and AA concentrations in different electrochemical technologies, including CV, DPV, and CA, and PEC technology. AA concentration ranges applicable to various electrochemical equations were as follows: 0.45~2.10 mM of CV, 0.75~2.025 mM of DPV, 0.3~2.4 mM of CA, 7.5~480 μM of PEC, and the corresponding detection limits for AA were 1.08 μM (S/N = 3), 0.14 μM (S/N = 3), 0.049 μM (S/N = 3), and 0.084 nA/μM. Moreover, the proposed Cu-TCPP MOFs@GCE electrochemical and photoelectrochemical sensing platform was applied to determine the AA concentration of a real human serum sample; the results reveal that Cu-TCPP MOFs@GCE sensing platform could accurately determine the concentration of AA of the human serum under other potential interferences contained in the human serum samples.

A computational mechanistic study of CH hydroxylation with mononuclear copper–oxygen complexes

A computational study of methane hydroxylation by oxygen-bound monocopper complexes.

Influence of the spatial distribution of copper sites on the selectivity of the oxygen reduction reaction

Moving towards a hydrogen economy raises the demand for affordable and efficient catalysts for the oxygen reduction reaction. Cu-bmpa (bmpa = bis(2-picolyl)amine) is shown to have moderate activity, but poor selectivity for the 4-electron reduction of oxygen to water. To enhance the selectivity towards water formation, the cooperative effect of three Cu-bmpa binding sites in a single trinuclear complex is investigated. The catalytic currents in the presence of the trinuclear sites are lower, possibly due to the more rigid structure and therefore higher reorganization energies and/or slower diffusion rates of the catalytic species. Although the oxygen reduction activity of the trinuclear complexes is lower than that of mononuclear Cu-bmpa, the selectivity of the copper mediated oxygen reduction was significantly enhanced towards the 4-electron process due to a cooperative effect between three copper centers that have been positioned in close proximity. These results indicate that the cooperativity between metal ions within biomimetic sites can greatly enhance the ORR selectivity.

Reversible Scavenging of Dioxygen from Air by a Copper Complex

We report that exposing the dipyrrin complex (^EMindL)Cu(N₂) to air affords rapid, quantitative uptake of O₂ in either solution or the solid-state to yield (^EMindL)Cu(O₂). The air and thermal stability of (^EMindL)Cu(O₂) is unparalleled in molecular copper-dioxygen coordination chemistry, attributable to the ligand flanking groups which preclude the [Cu(O₂)]¹⁺ core from degradation. Despite the apparent stability of (^EMindL)Cu(O₂), dioxygen binding is reversible over multiple cycles with competitive solvent exchange, thermal cycling, and redox manipulations. Additionally, rapid, catalytic oxidation of 1,2-diphenylhydrazine to azoarene with the generation of hydrogen peroxide is observed, through the intermittency of an observable (^EMindL)Cu(H₂O₂) adduct. The design principles gleaned from this study can provide insight for the formation of new materials capable of reversible scavenging of O₂ from air under ambient conditions with low-coordinate Cu^I sorbents.

Molecular design and application of luminescent materials composed of group 13 elements with an aggregation-induced emission property

Complexation of π-conjugated ligands by metal or semimetal ions leads to the enhancement of the planarity and rigidity of π-conjugated systems. Boron, especially, has played a central role in the design of luminescent main-group complexes. However, these complexes still suffer the disadvantage of aggregation-caused quenching as well as typical organic fluorophores. It has recently been reported that some types of boron complexes exhibit the aggregation-induced emission (AIE) property. Moreover, AIE behavior from complexes and organometallic compounds composed of the other group 13 elements, such as aluminum and gallium, has emerged in this decade. These observations greatly encourage us to develop advanced functional materials based on the group 13 elements. Indeed, recent research has demonstrated that these classes of materials are potentially versatile scaffolds for constructing chromic luminophores, efficiently emissive π-conjugated polymers and so on. This review mainly describes AIE-active group 13 complexes with four-coordinate structures and their application as photo-functional materials. Proposed mechanisms of the origins of AIE behavior are briefly discussed.

Structurally Characterized μ-1,2-Peroxo/Superoxo Dicopper(II) Pair

Superoxo complexes of copper are primary adducts in several O₂-activating Cu-containing metalloenzymes as well as in other Cu-mediated oxidation and oxygenation reactions. Because of their intrinsically high reactivity, however, isolation of Cu_x(O₂^•-) species is challenging. Recent work (J. Am. Chem. Soc. 2017, 139, 9831; 2019, 141, 12682) established fundamental thermochemical data for the H atom abstraction reactivity of dicopper(II) superoxo complexes, but structural characterization of these important intermediates was so far lacking. Here we report the first crystallographic structure determination of a superoxo dicopper(II) species (3) together with the structure of its 1e^- reduced peroxo congener (2; a rare cis-μ-1,2-peroxo dicopper(II) complex). Interconversion of 2 and 3 occurs at low potential (-0.58 V vs Fc/Fc⁺) and is reversible both chemically and electrochemically. Comparison of metric parameters (d(O-O) = 1.441(2) Å for 2 vs 1.329(7) Å for 3) and of spectroscopic signatures (ν̃(¹⁶O-¹⁶O) = 793 cm^-1 for 2 vs 1073 cm^-1 for 3) reflects that the redox process occurs at the bridging O₂-derived unit. The Cu^II-O₂^•--Cu^II complex has an S = 1/2 spin ground state according to magnetic and EPR data, in agreement with density functional theory calculations. Computations further show that the potential associated with changes of the Cu-O-O-Cu dihedral angle is shallow for both 2 and 3. These findings provide a structural basis for the low reorganization energy of the kinetically facile 1e^- interconversion of μ-1,2-superoxo/peroxo dicopper(II) couples, and they open the door for comprehensive studies of these key intermediates in Cu_x/O₂ chemistry.

Chlorophyll a π-Cation Radical as Redox Mediator in Superoxide Dismutase (SOD) Mimetics

The extensive speciation of copper(II) chloride in organic solvents varies with concentration, temperature, pressure and oxygen content, providing the ability to switch between different chlorophyll transmetalation pathways. We found that one of them is exceptionally suitable for the formation and stabilisation of the chlorophyll π-cation radical. This is due to unique redox cycling, which is coupled to the generation and transformation of various reactive oxygen species. In the presence of a proton donor, our system shows behavior which resembles that of superoxide dismutase (SOD). Regardless of light, chlorophyll acts as an electron transfer mediator.

Homogeneous Catalysts Based on First-Row Transition-Metals for Electrochemical Water Oxidation

Strategies that enable the renewable production of storable fuels (i. e. hydrogen or hydrocarbons) through electrocatalysis continue to generate interest in the scientific community. Of central importance to this pursuit is obtaining the requisite chemical (H+ ) and electronic (e- ) inputs for fuel-forming reduction reactions, which can be met sustainably by water oxidation catalysis. Further possibility exists to couple these redox transformations to renewable energy sources (i. e. solar), thus creating a carbon neutral solution for long-term energy storage. Nature uses a Mn-Ca cluster for water oxidation catalysis via multiple proton-coupled electron-transfers (PCETs) with a photogenerated bias to perform this process with TOF 100∼300 s-1 . Synthetic molecular catalysts that efficiently perform this conversion commonly utilize rare metals (e. g., Ru, Ir), whose low abundance are associated to higher costs and scalability limitations. Inspired by nature's use of 1st row transition metal (TM) complexes for water oxidation catalysts (WOCs), attempts to use these abundant metals have been intensively explored but met with limited success. The smaller atomic size of 1st row TM ions lowers its ability to accommodate the oxidative equivalents required in the 4e- /4H+ water oxidation catalysis process, unlike noble metal catalysts that perform single-site electrocatalysis at lower overpotentials (η). Overcoming the limitations of 1st row TMs requires developing molecular catalysts that exploit biomimetic phenomena - multiple-metal redox-cooperativity, PCET and second-sphere interactions - to lower the overpotential, preorganize substrates and maintain stability. Thus, the ultimate goal of developing efficient, robust and scalable WOCs remains a challenge. This Review provides a summary of previous research works highlighting 1st row TM-based homogeneous WOCs, catalytic mechanisms, followed by strategies for catalytic activity improvements, before closing with a future outlook for this field.

Influence of Ligand Denticity and Flexibility on the Molecular Copper Mediated Oxygen Reduction Reaction

To date, the copper complex with the tris(2-pyridylmethyl)amine (tmpa) ligand (Cu-tmpa) catalyzes the ORR with the highest reported turnover frequency (TOF) for any molecular copper catalyst. To gain insight into the importance of the tetradentate nature and high flexibility of the tmpa ligand for efficient four-electron ORR catalysis, the redox and electrocatalytic ORR behavior of the copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) (Cu-terpy and Cu-bmpa, respectively) were investigated in the present study. With a combination of cyclic voltammetry and rotating ring disk electrode measurements, we demonstrate that the presence of the terpy and bmpa ligands results in a decrease in catalytic ORR activity and an increase in Faradaic efficiency for H₂O₂ production. The lower catalytic activity is shown to be the result of a stabilization of the Cu^I state of the complex compared to the earlier reported Cu-tmpa catalyst. This stabilization is most likely caused by the lower electron donating character of the tridentate terpy and bmpa ligands compared to the tetradentate tmpa ligand. The Laviron plots of the redox behavior of Cu-terpy and Cu-bmpa indicated that the formation of the ORR active catalyst involves relatively slow electron transfer kinetics which is caused by the inability of Cu-terpy and Cu-bmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex easily. Our study illustrates that both the tetradentate nature of the tmpa ligand and the ability of Cu-tmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex are of utmost importance for ORR catalysis with very high catalytic rates.

Redox and electrocatalytic ORR behavior of the mononuclear copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) in neutral aqueous buffer solution: High Faradaic efficiencies for H₂O₂ production were revealed along the ORR active potential window using the rotating ring disk electrode (RRDE), and the foot-of-the-wave analysis (FOWA) was applied to describe the catalytic activity quantitatively. Additionally, the stability of the catalysts under operating conditions receives considerable attention.

Dioxygen Binding to all 3d, 4d, and 5d Transition Metals from Coupled-Cluster Theory

Understanding how transition metals bind and activate dioxygen (O₂ ) is limited by experimental and theoretical uncertainties, making accurate quantum mechanical descriptors of interest. Here we report coupled-cluster CCSD(T) energies with large basis sets and vibrational and relativistic corrections for 160 3d, 4d, and 5d metal-O₂ systems. We define four reaction energies (120 in total for the 30 metals) that quantify O-O activation and reveal linear relationships between metal-oxygen and O-O binding energies. The CCSD(T) data can be combined with thermochemical cycles to estimate chemisorption and physisorption energies for each metal from metal oxide embedding energies, in good correlation with atomization enthalpies (R² =0.75). Spin-geometry variations can break the linearities, of interest to circumventing the Sabatier principle. Pt, Pd, Co, and Fe form a distinct group with the weakest O₂ binding. R² up to 0.84 between surface adsorption energies and our energies for MO₂ systems indicate relevance also to real catalytic systems.

Chemical Batteries with CO2

Efforts to obtain raw materials from CO₂ by catalytic reduction as a means of combating greenhouse gas emissions are pushing the boundaries of the chemical industry. The dimensions of modern energy regimes, on the one hand, and the necessary transport and trade of globally produced renewable energy, on the other, will require the use of chemical batteries in conjunction with the local production of renewable electricity. The synthesis of methanol is an important option for chemical batteries and will, for that reason, be described here in detail. It is also shown that the necessary, robust, and fundamental understanding of processes and the material science of catalysts for the hydrogenation of CO₂ does not yet exist.

Adsorption and activation of molecular oxygen over atomic copper(I/II) site on ceria

Supported atomic metal sites have discrete molecular orbitals. Precise control over the energies of these sites is key to achieving novel reaction pathways with superior selectivity. Here, we achieve selective oxygen (O₂) activation by utilising a framework of cerium (Ce) cations to reduce the energy of 3d orbitals of isolated copper (Cu) sites. Operando X-ray absorption spectroscopy, electron paramagnetic resonance and density-functional theory simulations are used to demonstrate that a [Cu(I)O₂]^3- site selectively adsorbs molecular O₂, forming a rarely reported electrophilic η²-O₂ species at 298 K. Assisted by neighbouring Ce(III) cations, η²-O₂ is finally reduced to two O^2-, that create two Cu-O-Ce oxo-bridges at 453 K. The isolated Cu(I)/(II) sites are ten times more active in CO oxidation than CuO clusters, showing a turnover frequency of 0.028 ± 0.003 s^-1 at 373 K and 0.01 bar P_CO. The unique electronic structure of [Cu(I)O₂]^3- site suggests its potential in selective oxidation.

Fluorescein-Containing Superoxide Probes with a Modular Copper-Based Trigger

Fluorescein-derived superoxide probes featuring a copper(II) complex that can be activated by superoxide to initiate ether bond cleavage and uncage a fluorescein reporter for imaging in live cells are described. Compared to other superoxide sensing moieties, this bond cleavage strategy can be modularly adapted to fluorescent reporters with different properties without compromising the superoxide reactivity and selectivity. A green-emitting probe and its lysosome-targeting analogue have been successfully developed. Both probes are sensitive with more than 30-fold fluorescence enhancement towards superoxide and are highly selective with no significant response towards other reactive oxygen species. A structure-activity relationship study of the copper-based superoxide trigger showed that the secondary coordination environment of the copper(II) center is important for the superoxide reactivity and selectivity. The probes have been applied in imaging changes in intracellular superoxide level in live HeLa and HEK293T cells upon menadione stimulation and also in a cellular inflammation model in RAW 264.7 cells.

Peroxocobalt(iii) species activates nitriles via a superoxocobalt(ii) diradical state

The dioxygenation of nitriles by [CoIII(TBDAP)(O2)]+ (TBDAP = N,N-di-tert-butyl-2,11-diaza[3.3](2,6)-pyridinophane) is investigated using DFT-calculations. The mechanism proposed previously based on experimental observations, which invoked an outer-sphere cycloaddition, was found to be unreasonable. Instead, calculations suggest that an inner-sphere mechanism involving the cleavage of one of the Co-O bonds assisted by substrate uptake is much more likely. The reactively competent species is a triplet consisting of a Co(ii)-superoxo functionality, which can undergo O-C bond formation and O-O bond cleavage traversing low energy transition states. The role of the structurally rigid TBDAP ligand is to prevent the participation of the pyridyl ligand in the delocalization of the unpaired electron density.

Low Reorganization Energy for Electron Self-Exchange by a Formally Copper(III,II) Redox Couple

The rate constant for electron self-exchange (k₁₁) between LCuOH and [LCuOH]^- (L = bis-2,6-(2,6-diisopropylphenyl)carboximidopyridine) was determined using the Marcus cross relation. This work involved measurement of the rate of the cross-reaction between [Bu₄N][LCuOH] and [Fc][BAr₄^F] (Fc⁺ = ferrocenium; BAr₄^F = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate)) by stopped-flow methods at -88 °C in CH₂Cl₂ and measurement of the equilibrium constant for the redox process by UV-vis titrations under the same conditions. A value of k₁₁ = 3 × 10⁴ M^-1 s^-1 (-88 °C) led to estimation of a value 9 × 10⁶ M^-1 s^-1 at 25 °C, which is among the highest values known for copper redox couples. Further Marcus analysis enabled determination of a low reorganization energy, λ = 0.95 ± 0.17 eV, attributed to minimal structural variation between the redox partners. In addition, the reaction entropy (ΔS°) associated with the LCuOH/[LCuOH]^- self-exchange was determined from the temperature dependence of the redox potentials, and found to be dependent upon ionic strength. Comparisons to other Cu redox systems and potential new applications for the formally Cu^III,II system are discussed.

Switching from a Chromium(IV) Peroxide to a Chromium(III) Superoxide upon Coordination of a Donor in the trans Position

O₂ activation at a chromium(II) siloxide complex in propionitrile leads to a chromium(III) complex with an end-on bound superoxide ligand, while the reaction in tetrahydrofuran leads to a side-on peroxo chromium(IV) compound. The superoxide reacts faster with (2,2,6,6-tetramethylpiperidin-1-yl)oxyl hydroxylamine while the peroxide, unlike the superoxide, proved capable of deformylating aldehydes. The system was found to represent a unique case, where even a switching between the two structures can be achieved via the solvent; its ability to coordinate at the position trans to the O₂ ligand is decisive, as supported by density functional theory studies. Altogether, the results show that subtle changes can determine for an initially formed metal-dioxygen adduct, whether it exists as a superoxide or a peroxide, which thus merits consideration in discussions on mechanisms and possible reaction routes.

A theoretical investigation into the first-row transition metal–O2 adducts

Effects of both metal center and ligand ring size on the properties of metal–O₂ adducts.

Reactivity difference in the oxidative nucleophilic reaction of peroxonickel(iii) intermediates with open-chain and macrocyclic systems

The open-chain peroxonickel(iii) intermediate is much more reactive than the macrocyclic analogue in aldehyde deformylation.

Oxidation of Guanosine Monophosphate with O2 via a Ru-peroxo Complex in Water

Oxidative damage of DNA by reactive oxygen species (ROS) is responsible for aging and cancer. Although many studies of DNA damage by ROS have been conducted, there have been no reports of the oxidation of RNA components, such as guanosine monophosphate, by metal-based species in water. Here, we report the first case of oxidation of guanosine monophosphate to 8-oxoguanosine monophosphate by a metal-based oxygen bound species, derived from O₂ and in water.

Heterometallic CuII/LnIII polymers active in the catalytic aerobic oxidation of cycloalkenes under solvent-free conditions

Heterometallic 3d-4f inorganic polymers were prepared using 3,5 pyridinedicarboxylic acid (H2PDC), {[CuLn2(PDC)2(SO4)2(H2O)6]·H2O}n (Ln: SmIII, CuSmPDC, EuIII, CuEuPDC, GdIII, and CuGdPDC). These catalysts are active in the aerobic oxidation of cycloalkenes under solvent-free conditions, with a conversion for the oxidation of cyclohexene of 71% after one hour of the reaction, and a TOF value of 1438 h-1 for CuSmPDC. On the other hand, the oxidation of cycloheptene and cyclooctene exhibited slightly lower conversions of 52% and 47%, and TOF values of 1053 and 159 h-1 after 1 and 6 hours of the reaction, respectively. The radical mechanism for the oxidation reaction of cyclohexene was assessed by Raman and EPR spectroscopy. The first evidenced the formation of Cu-O2 adducts and the second permitted is to observe the presence of the oxygen centered radical species, which act as initiators of the reaction chain to generate the products. An increase in the temperature of the reaction correlates with the adduct formation, and with the enhancement of the oxidation reaction.