Exciton fine structure and spin relaxation in semiconductor colloidal quantum dots

Dielectric and Wavefunction Engineering of Electron Spin Lifetime in Colloidal Nanoplatelet Heterostructures

Colloidal semiconductor nanoplatelets (NPLs) have emerged as low-cost and free-standing alternates of traditional quantum wells. The giant heavy- and light-hole splitting in NPLs allows for efficient optical spin injection. However, the electron spin lifetimes for prototypical CdSe NPLs are within a few picoseconds, likely limited by strong electron-hole exchange in these quantum- and dielectric-confined materials. Here how this hurdle can be overcome with engineered NPL-heterostructures is demonstrated. By constructing type-I CdSe/ZnS core/shell NPLs, dielectric screening inside the core is strongly enhanced, prolonging the electron spin polarization time (τesp) to over 30 ps (or 60 ps electron spin-flip time). Alternatively, by growing type-II CdSe/CdTe core/crown NPLs to spatially separate electron and hole wavefunctions, the electron-hole exchange is strongly suppressed, resulting in τesp as long as 300 ps at room temperature. This study not only exemplifies how the well-established synthetic chemistry of colloidal heterostructures can aid in spin dynamics control but also establishes the feasibility of room-temperature coherent spin manipulation in colloidal NPLs.

Bright Excitonic Fine Structure in Metal-Halide Perovskites: From Two-Dimensional to Bulk

The optical response of two-dimensional (2D) perovskites, often referred to as natural quantum wells, is primarily governed by excitons, whose properties can be readily tuned by adjusting the perovskite layer thickness. We have investigated the exciton fine structure splitting in the archetypal 2D perovskite (PEA)2(MA)n-1PbnI3n+1 with varying numbers of inorganic octahedral layers n = 1, 2, 3, and 4. We demonstrate that the in-plane excitonic states exhibit splitting and orthogonally oriented dipoles for all confinement regimes. The evolution of the exciton states in an external magnetic field provides further insights into the g-factors and diamagnetic coefficients. With increasing n, we observe a gradual evolution of the excitonic parameters characteristic of a 2D to three-dimensional transition. Our results provide valuable information concerning the evolution of the optoelectronic properties of 2D perovskites with the changing confinement strength.

Two-Dimensional Electronic Spectroscopy Reveals Dynamics within the Bright Fine Structure of CdSe Quantum Dots

Semiconductor quantum dots are characterized by a discrete excitonic structure featuring coarse as well as fine structure. The lowest fine structure states have splittings into bright-dark states which are now well confirmed by single dot spectroscopy. In contrast, the splitting of the lowest coarse exciton into bright-bright fine structure states has not been observed nor the dynamics between these states. Here, we use the unique combination of time and energy resolution of two-dimensional electronic spectroscopy to directly observe the fine structure splittings into a bright-bright doublet. These splittings are strongly size dependent, with population relaxation on the <100 fs time scale.

Spin Quantum Dot Light-Emitting Diodes Enabled by 2D Chiral Perovskite with Spin-Dependent Carrier Transport

Chiral-induced spin selectivity (CISS) effect provides innovative approach to spintronics and quantum-based devices for chiral materials. Different from the conventional ferromagnetic devices, the application of CISS effect is potential to operate under room temperature and zero applied magnetic field. Low dimensional chiral perovskites by introducing chiral amines are beginning to show significant CISS effect for spin injection, but research on chiral perovskites is still in its infancy, especially on spin-light emitting diode (spin-LED) construction. Here, the spin-QLEDs enabled by 2D chiral perovskites as CISS layer for spin-dependent carrier injection and CdSe/ZnS quantum dots (QDs) as light emitting layer are reported. The regulation pattern of the chirality and thickness of chiral perovskites, which affects the circularly polarized electroluminescence (CP-EL) emission of spin-QLED, is discovered. Notably, the spin injection polarization of 2D chiral perovskites is higher than 80% and the CP-EL asymmetric factor (gCP-EL ) achieves up to 1.6 × 10-2 . Consequently, this work opens up a new and effective approach for high-performance spin-LEDs.

Size-Dependent Optical Properties of InP Colloidal Quantum Dots

Indium phosphide colloidal quantum dots (CQDs) are the main alternative for toxic and restricted Cd based CQDs for lighting and display applications. Here we systematically report on the size-dependent optical absorption, ensemble, and single particle photoluminescence (PL) and biexciton lifetimes of core-only InP CQDs. This systematic study is enabled by improvements in the synthesis of InP CQDs to yield a broad size series of monodisperse core-only InP CQDs with narrow absorption and PL line width and significant PL quantum yield.

Quantum Dot-Organic Molecule Conjugates as Hosts for Photogenerated Spin Qubit Pairs

The inherent spin polarization present in photogenerated spin-correlated radical pairs makes them promising candidates for quantum computing and quantum sensing applications. The spin states of these systems can be probed and manipulated with microwave pulses using electron paramagnetic resonance spectrometers. However, to date, there are no reports on magnetic resonance-based spin measurements of photogenerated spin-correlated radical pairs hosted on quantum dots. In the current work, we prepare dye molecule-inorganic quantum dot conjugates and show that they can produce photogenerated spin-polarized states. The dye molecule, D131, is chosen for its ability to undergo efficient charge separation, and the nanoparticle materials, ZnO quantum dots, are chosen for their promising spin properties. Transient and steady state optical spectroscopy performed on ZnO quantum dot-D131 conjugates shows that reversible photogenerated charge separation is occurring. Transient and pulsed electron paramagnetic resonance experiments are then performed on the photogenerated radical pair, which demonstrate that (1) the radical pair is polarized at moderate temperatures and well modeled by existing theories and (2) the spin states can be accessed and manipulated with microwave pulses. This work opens the door to a new class of promising qubit materials that can be photogenerated in polarized states and hosted by highly tailorable inorganic nanoparticles.

Quantification of Exciton Fine Structure Splitting in a Two-Dimensional Perovskite Compound

Applications of two-dimensional (2D) perovskites have significantly outpaced the understanding of many fundamental aspects of their photophysics. The optical response of 2D lead halide perovskites is dominated by strongly bound excitonic states. However, a comprehensive experimental verification of the exciton fine structure splitting and associated transition symmetries remains elusive. Here we employ low temperature magneto-optical spectroscopy to reveal the exciton fine structure of (PEA)₂PbI₄ (here PEA is phenylethylammonium) single crystals. We observe two orthogonally polarized bright in-plane free exciton (FX) states, both accompanied by a manifold of phonon-dressed states that preserve the polarization of the corresponding FX state. Introducing a magnetic field perpendicular to the 2D plane, we resolve the lowest energy dark exciton state, which although theoretically predicted, has systematically escaped experimental observation (in Faraday configuration) until now. These results corroborate standard multiband, effective-mass theories for the exciton fine structure in 2D perovskites and provide valuable quantification of the fine structure splitting in (PEA)₂PbI₄.

Coherent Two-Dimensional and Broadband Electronic Spectroscopies

Over the past few decades, coherent broadband spectroscopy has been widely used to improve our understanding of ultrafast processes (e.g., photoinduced electron transfer, proton transfer, and proton-coupled electron transfer reactions) at femtosecond resolution. The advances in femtosecond laser technology along with the development of nonlinear multidimensional spectroscopy enabled further insights into ultrafast energy transfer and carrier relaxation processes in complex biological and material systems. New discoveries and interpretations have led to improved design principles for optimizing the photophysical properties of various artificial systems. In this review, we first provide a detailed theoretical framework of both coherent broadband and two-dimensional electronic spectroscopy (2DES). We then discuss a selection of experimental approaches and considerations of 2DES along with best practices for data processing and analysis. Finally, we review several examples where coherent broadband and 2DES were employed to reveal mechanisms of photoinitiated ultrafast processes in molecular, biological, and material systems. We end the review with a brief perspective on the future of the experimental techniques themselves and their potential to answer an even greater range of scientific questions.

Rational Design of Dot-on-Rod Nano-Heterostructure for Photocatalytic CO2 Reduction: Pivotal Role of Hole Transfer and Utilization

Inspired by green plants, artificial photosynthesis has become one of the most attractive approaches toward carbon dioxide (CO₂ ) valorization. Semiconductor quantum dots (QDs) or dot-in-rod (DIR) nano-heterostructures have gained substantial research interest in multielectron photoredox reactions. However, fast electron-hole recombination or sluggish hole transfer and utilization remains unsatisfactory for their potential applications. Here, the first application of a well-designed ZnSe/CdS dot-on-rods (DORs) nano-heterostructure for efficient and selective CO₂ photoreduction with H₂ O as an electron donor is presented. In-depth spectroscopic studies reveal that surface-anchored ZnSe QDs not only assist ultrafast (≈2 ps) electron and hole separation, but also promote interfacial hole transfer participating in oxidative half-reactions. Surface photovoltage (SPV) spectroscopy provides a direct image of spatially separated electrons in CdS and holes in ZnSe. Therefore, ZnSe/CdS DORs photocatalyze CO₂ to CO with a rate of ≈11.3 µmol g^-1 h^-1 and ≥85% selectivity, much higher than that of ZnSe/CdS DIRs or pristine CdS nanorods under identical conditions. Obviously, favored energy-level alignment and unique morphology balance the utilization of electrons and holes in this nano-heterostructure, thus enhancing the performance of artificial photosynthetic solar-to-chemical conversion.

Marcus inverted region of charge transfer from low-dimensional semiconductor materials

A key process underlying the application of low-dimensional, quantum-confined semiconductors in energy conversion is charge transfer from these materials, which, however, has not been fully understood yet. Extensive studies of charge transfer from colloidal quantum dots reported rates increasing monotonically with driving forces, never displaying an inverted region predicted by the Marcus theory. The inverted region is likely bypassed by an Auger-like process whereby the excessive driving force is used to excite another Coulomb-coupled charge. Herein, instead of measuring charge transfer from excitonic states (coupled electron-hole pairs), we build a unique model system using zero-dimensional quantum dots or two-dimensional nanoplatelets and surface-adsorbed molecules that allows for measuring charge transfer from transiently-populated, single-charge states. The Marcus inverted region is clearly revealed in these systems. Thus, charge transfer from excitonic and single-charge states follows the Auger-assisted and conventional Marcus charge transfer models, respectively. This knowledge should enable rational design of energetics for efficient charge extraction from low-dimensional semiconductor materials as well as suppression of the associated energy-wasting charge recombination.

Marcus inverted region for charge transfer from low-dimensional semiconductor materials has been long sought after. Here, the authors reveal this region by directly measuring charge transfer from single-charge states rather than excitonic states.

Hyperfine-Induced Electron-Spin Dephasing in Negatively Charged Colloidal Quantum Dots: A Survey of Size Dependence

The electron spin relaxation processes are complicated in semiconductor quantum dots. Different spin relaxation mechanisms may result in an increased or decreased spin relaxation rate with the size. The information on size-dependent spin dynamics helps to clarify and better understand the underlying spin relaxation processes. We investigate the size dependence of the electron spin dynamics in negatively photocharged CdSe and CdS colloidal quantum dots by time-resolved ellipticity spectroscopy. It is revealed that the electron spin dephasings of photodoped electron in zero or weak magnetic fields are dominated by the electron-nuclear hyperfine interaction for all measured samples. The hyperfine-induced electron spin dephasing time is ∼1-2 ns at room temperature and decreases with decreasing the size D. In addition to a size-dependent dephasing time that is directly proportional to D^3/2, our measurements also show a size-independent time component, likely due to the laser-induced nuclear spin ordering.

Simultaneous Conduction and Valence Band Regulation of Indium-Based Quantum Dots for Efficient H2 Photogeneration

Indium-based chalcogenide semiconductors have been served as the promising candidates for solar H₂ evolution reaction, however, the related studies are still in its infancy and the enhancement of efficiency remains a grand challenge. Here, we report that the photocatalytic H₂ evolution activity of quantized indium chalcogenide semiconductors could be dramatically aroused by the co-decoration of transition metal Zn and Cu. Different from the traditional metal ion doping strategies which only focus on narrowing bandgap for robust visible light harvesting, the conduction and valence band are coordinately regulated to realize the bandgap narrowing and the raising of thermodynamic driving force for proton reduction, simultaneously. Therefore, the as-prepared noble metal-free Cu_0.4-ZnIn₂S₄ quantum dots (QDs) exhibits extraordinary activity for photocatalytic H₂ evolution. Under optimal conditions, the Cu_0.4-ZnIn₂S₄ QDs could produce H₂ with the rate of 144.4 μmol h⁻¹ mg⁻¹, 480-fold and 6-fold higher than that of pristine In₂S₃ QDs and Cu-doped In₂S₃ QDs counterparts respectively, which is even comparable with the state-of-the-art cadmium chalcogenides QDs.

Shallow distance-dependent triplet energy migration mediated by endothermic charge-transfer

Conventional wisdom posits that spin-triplet energy transfer (TET) is only operative over short distances because Dexter-type electronic coupling for TET rapidly decreases with increasing donor acceptor separation. While coherent mechanisms such as super-exchange can enhance the magnitude of electronic coupling, they are equally attenuated with distance. Here, we report endothermic charge-transfer-mediated TET as an alternative mechanism featuring shallow distance-dependence and experimentally demonstrated it using a linked nanocrystal-polyacene donor acceptor pair. Donor-acceptor electronic coupling is quantitatively controlled through wavefunction leakage out of the core/shell semiconductor nanocrystals, while the charge/energy transfer driving force is conserved. Attenuation of the TET rate as a function of shell thickness clearly follows the trend of hole probability density on nanocrystal surfaces rather than the product of electron and hole densities, consistent with endothermic hole-transfer-mediated TET. The shallow distance-dependence afforded by this mechanism enables efficient TET across distances well beyond the nominal range of Dexter or super-exchange paradigms.

Electron and Hole Spin Relaxation in CdSe Colloidal Nanoplatelets

Solution-processed quantum-confined nanocrystals are important building blocks for scalable implementation of quantum information science. Extensive studies on colloidal quantum dots (QDs) have revealed subpicosecond hole spin relaxation, whereas the electron spin dynamics remains difficult to probe. Here we study electron and hole spin dynamics in CdSe colloidal nanoplatelets (also called quantum wells) of varying thicknesses using circularly polarized transient absorption spectroscopy at room temperature. The clear spectroscopic features of transition bands associated with heavy, light, and spin-orbit split-off holes enabled separate probes of electron and hole dynamics. The hole spin-flip occurred within ∼200 fs, arising from strong spin-orbit coupling in the valence band. The electron spin lifetime decreased from 6.2 to 2.2 ps as the platelet thickness is reduced from 6 to 4 monolayers, reflecting an exchange interaction between the electron and the hole and/or surface dangling bond spins enhanced by quantum confinement.

Engineering 3D perovskites for photon interconversion applications

In this review, we highlight the current advancements in the field of triplet sensitization by three-dimensional (3D) perovskite nanocrystals and bulk films. First introduced in 2017, 3D perovskite sensitized upconversion (UC) is a young fast-evolving field due to the tunability of the underlying perovskite material. By tuning the perovskite bandgap, visible-to-ultraviolet, near-infrared-to-visible or green-to-blue UC has been realized, which depicts the broad applicability of this material. As this research field is still in its infancy, we hope to stimulate the field by highlighting the advantages of these perovskite nanocrystals and bulk films, as well as shedding light onto the current drawbacks. In particular, the keywords toxicity, reproducibility and stability must be addressed prior to commercialization of the technology. If successful, photon interconversion is a means to increase the achievable efficiency of photovoltaic cells beyond its current limits by increasing the window of useable wavelengths.

Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction

As one of the most critical approaches to resolve the energy crisis and environmental concerns, carbon dioxide (CO₂ ) photoreduction into value-added chemicals and solar fuels (for example, CO, HCOOH, CH₃ OH, CH₄ ) has attracted more and more attention. In nature, photosynthetic organisms effectively convert CO₂ and H₂ O to carbohydrates and oxygen (O₂ ) using sunlight, which has inspired the development of low-cost, stable, and effective artificial photocatalysts for CO₂ photoreduction. Due to their low cost, facile synthesis, excellent light harvesting, multiple exciton generation, feasible charge-carrier regulation, and abundant surface sites, semiconductor quantum dots (QDs) have recently been identified as one of the most promising materials for establishing highly efficient artificial photosystems. Recent advances in CO₂ photoreduction using semiconductor QDs are highlighted. First, the unique photophysical and structural properties of semiconductor QDs, which enable their versatile applications in solar energy conversion, are analyzed. Recent applications of QDs in photocatalytic CO₂ reduction are then introduced in three categories: binary II-VI semiconductor QDs (e.g., CdSe, CdS, and ZnSe), ternary I-III-VI semiconductor QDs (e.g., CuInS₂ and CuAlS₂ ), and perovskite-type QDs (e.g., CsPbBr₃ , CH₃ NH₃ PbBr₃ , and Cs₂ AgBiBr₆ ). Finally, the challenges and prospects in solar CO₂ reduction with QDs in the future are discussed.

A Heterogeneous Kinetics Model for Triplet Exciton Transfer in Solid-State Upconversion

High internal quantum efficiency semiconductor nanocrystal (NC)-based photon upconversion devices are currently based on a single monolayer of active NCs. Devices are therefore limited in their external quantum efficiency based on the low number of photons absorbed. Increasing the number of photons absorbed is expected to increase the upconversion efficiency, yet experimentally increasing the number of layers does not appreciably increase the upconverted light output. We unravel this mystery by combining kinetic modeling and transient photoluminescence spectroscopy. The inherent energetic disorder stemming from the polydispersity of the NCs means that the kinetics are governed by a stochastic transfer matrix. By drawing the rates from a probabilistic distribution and constructing a reaction network with realistic connectivity, we are able to fit complex photoluminescence traces with a very simple model. We use this model to explain the thickness-dependent performance of the upconversion devices and can attribute the reduced efficiencies to the low excitonic diffusivity of the exciton within the NC layers and increased back transfer of the created singlets from the organic annihilator rubrene. We suggest some avenues for overcoming these limitations in future devices.

Spin Selectivity in Photoinduced Charge-Transfer Mediated by Chiral Molecules

Optical control and readout of electron spin and spin currents in thin films and nanostructures have remained attractive yet challenging goals for emerging technologies designed for applications in information processing and storage. Recent advances in room-temperature spin polarization using nanometric chiral molecular assemblies suggest that chemically modified surfaces or interfaces can be used for optical spin conversion by exploiting photoinduced charge separation and injection from well-coupled organic chromophores or quantum dots. Using light to drive photoexcited charge-transfer processes mediated by molecules with central or helical chirality enables indirect measurements of spin polarization attributed to the chiral-induced spin selectivity effect and of the efficiency of spin-dependent electron transfer relative to competitive relaxation pathways. Herein, we highlight recent approaches used to detect and to analyze spin selectivity in photoinduced charge transfer including spin-transfer torque for local magnetization, nanoscale charge separation and polarization, and soft ferromagnetic substrate magnetization- and chirality-dependent photoluminescence. Building on these methods through systematic investigation of molecular and environmental parameters that influence spin filtering should elucidate means to manipulate electron spins and photoexcited states for room-temperature optoelectronic and photospintronic applications.

Spin Blockades to Relaxation of Hot Multiexcitons in Nanocrystals

The conjecture that, as in bulk semiconductors, hot multiexcitons in nanocrystals cool rapidly to the lowest available energy levels is tested here by recording the effects of a single cold "spectator" exciton on the relaxation dynamics of a subsequently deposited hot counterpart. Results in CdSe/CdS nanodots show that a preexisting cold "spectator exciton" allows only half of the photoexcited electrons to relax directly to the band-edge. The rest are blocked in an excited quantum state due to conflicts in spin orientation. The latter fully relax in this sample only after ∼25 ps as the blocked electrons spins flip, prolonging the temporal window of opportunity for harvesting the retained energy more than 100 fold! Common to all quantum-confined nanocrystals, this process will delay cooling and impact the spectroscopic signatures of hot multiexcitons in all envisioned generation scenarios. How the spin-flipping rate scales with particle size and temperature remains to be determined.

Stable passively Q-switched erbium-doped fiber laser incorporating a PbS quantum dots polystyrene composite film based saturable absorber

We demonstrated a passively Q-switched erbium-doped fiber laser (EDFL) using PbS quantum dots in polystyrene films (QDPFs) as saturable absorbers (SAs). Compared to other SAs, PbS QDPFs have advantages of broad absorption range, high quantum yield, low cost, and facile preparation. We have successfully generated stable Q-switched pulses with an average output power of 40.19 mW, a single pulse energy of 586.1 nJ, a repetition rate of 68.04 kHz, a pulse width of 3.9 μs, and a signal-to-noise ratio of 50.5 dB under 660 mW pump power. The output of the EDFL has been monitored for 5 consecutive hours under laboratory conditions to show stable operation of the laser system.

Observation of Exciton-Exciton Interaction Mediated Valley Depolarization in Monolayer MoSe2

The valley pseudospin in monolayer transition metal dichalcogenides (TMDs) has been proposed as a new way to manipulate information in various optoelectronic devices. This relies on a large valley polarization that remains stable over long time scales (hundreds of nanoseconds). However, time-resolved measurements report valley lifetimes of only a few picoseconds. This has been attributed to mechanisms such as phonon-mediated intervalley scattering and a precession of the valley pseudospin through electron-hole exchange. Here we use transient spin grating to directly measure the valley depolarization lifetime in monolayer MoSe₂. We find a fast valley decay rate that scales linearly with the excitation density at different temperatures. This establishes the presence of strong exciton-exciton Coulomb exchange interactions enhancing the valley depolarization. Our work highlights the microscopic processes inhibiting the efficient use of the exciton valley pseudospin in monolayer TMDs.

Using lead chalcogenide nanocrystals as spin mixers: a perspective on near-infrared-to-visible upconversion

This perspective highlights recent advances in the field of PbS NC-sensitized near-infrared-to-visible upconversion based on triplet–triplet annihilation in rubrene.

Speed Limit for Triplet-Exciton Transfer in Solid-State PbS Nanocrystal-Sensitized Photon Upconversion

Hybrid interfaces combining inorganic and organic materials underpin the operation of many optoelectronic and photocatalytic systems and allow for innovative approaches to photon up- and down-conversion. However, the mechanism of exchange-mediated energy transfer of spin-triplet excitons across these interfaces remains obscure, particularly when both the macroscopic donor and acceptor are composed of many separately interacting nanoscopic moieties. Here, we study the transfer of excitons from colloidal lead sulfide (PbS) nanocrystals to the spin-triplet state of rubrene molecules. By reducing the length of the carboxylic acid ligands on the nanocrystal surface from 18 to 4 carbon atoms, thinning the effective ligand shell from 13 to 6 Å, we are able to increase the characteristic transfer rate by an order of magnitude. However, we observe that the energy transfer rate asymptotes for shorter separation distances (≤10 Å) which we attribute to the reduced Dexter coupling brought on by the increased effective dielectric constant of these solid-state devices when the aliphatic ligands are short. This implies that the shortest ligands, which hinder long-term colloidal stability, offer little advantage for energy transfer. Indeed, we find that hexanoic acid ligands are already sufficient for near-unity transfer efficiency. Using nanocrystals with these optimal-length ligands in an improved solid-state device structure, we obtain an upconversion efficiency of (7 ± 1)% with excitation at λ = 808 nm.

Two-Dimensional Visible Spectroscopy For Studying Colloidal Semiconductor Nanocrystals

Possibilities offered by 2D visible spectroscopy for the investigation of the properties of excitons in colloidal semiconductor nanocrystals are overviewed, with a particular focus on their ultrafast dynamics. The technique of 2D electronic spectroscopy is illustrated with several examples showing its advantages compared to 1D ultrafast spectroscopic techniques (transient absorption and time-resolved photoluminescence).

Cold denaturation induces inversion of dipole and spin transfer in chiral peptide monolayers

Chirality-induced spin selectivity is a recently-discovered effect, which results in spin selectivity for electrons transmitted through chiral peptide monolayers. Here, we use this spin selectivity to probe the organization of self-assembled α-helix peptide monolayers and examine the relation between structural and spin transfer phenomena. We show that the α-helix structure of oligopeptides based on alanine and aminoisobutyric acid is transformed to a more linear one upon cooling. This process is similar to the known cold denaturation in peptides, but here the self-assembled monolayer plays the role of the solvent. The structural change results in a flip in the direction of the electrical dipole moment of the adsorbed molecules. The dipole flip is accompanied by a concomitant change in the spin that is preferred in electron transfer through the molecules, observed via a new solid-state hybrid organic-inorganic device that is based on the Hall effect, but operates with no external magnetic field or magnetic material.

The Hydric Effect in Inorganic Nanomaterials for Nanoelectronics and Energy Applications

Protons, as one of the world's smallest ions, are able to trigger the charge effect without obvious lattice expansion inside inorganic materials, offering a unique and important test-bed for controlling their diverse functionalities. Arising from the high chemical reactivity of hydrogen (easily losing an electron) with various main group anions (easily accepting a proton), the hydric effect provides a convenient and environmentally benign route to bring about fascinating new physicochemical properties, as well as to create new inorganic structures based on the "old lattice" without dramatically destroying the pristine structure, covering most inorganic materials. Moreover, hydrogen atoms tend to bond with anions or to produce intrinsic defects, both of which are expected to inject extra electrons into lattice framework, promising advances in control of bandgap, spin behavior, and carrier concentration, which determine functionality for wide applications. In this review article, recently developed effective hydric strategies are highlighted, which include the conventional hydric reaction under high temperature or room temperature, proton irradiation or hydrogen plasma treatment, and gate-electrolyte-driven adsorption or doping. The diverse physicochemical properties brought by the hydric effect via modulation of the intrinsic electronic structure are also summarized, finding wide applications in nanoelectronics, energy applications, and catalysis.

Ultrafast multi-level logic gates with spin-valley coupled polarization anisotropy in monolayer MoS2

The inherent valley-contrasting optical selection rules for interband transitions at the K and K' valleys in monolayer MoS2 have attracted extensive interest. Carriers in these two valleys can be selectively excited by circularly polarized optical fields. The comprehensive dynamics of spin valley coupled polarization and polarized exciton are completely resolved in this work. Here, we present a systematic study of the ultrafast dynamics of monolayer MoS2 including spin randomization, exciton dissociation, free carrier relaxation, and electron-hole recombination by helicity- and photon energy-resolved transient spectroscopy. The time constants for these processes are 60 fs, 1 ps, 25 ps, and ~300 ps, respectively. The ultrafast dynamics of spin polarization, valley population, and exciton dissociation provides the desired information about the mechanism of radiationless transitions in various applications of 2D transition metal dichalcogenides. For example, spin valley coupled polarization provides a promising way to build optically selective-driven ultrafast valleytronics at room temperature. Therefore, a full understanding of the ultrafast dynamics in MoS2 is expected to provide important fundamental and technological perspectives.

Synthesis of AS1411-aptamer-conjugated CdTe quantum dots with high fluorescence strength for probe labeling tumor cells

In this paper, we report microwave-assisted, one-stage synthesis of high-quality functionalized water-soluble cadmium telluride (CdTe) quantum dots (QDs). By selecting sodium tellurite as the Te source, cadmium chloride as the Cd source, mercaptosuccinic acid (MSA) as the capping agent, and a borate-acetic acid buffer solution with a pH range of 5-8, CdTe nanocrystals with four colors (blue to orange) were conveniently prepared at 100 °C under microwave irradiation in less than one hour (reaction time: 10-60 min). The influence of parameters such as the pH, Cd:Te molar ratio, and reaction time on the emission range and quantum yield percentage (QY%) was investigated. The structures and compositions of the prepared CdTe QDs were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, selective area electron diffraction, and X-ray powder diffraction experiments. The formation mechanism of the QDs is discussed in this paper. Furthermore, AS1141-aptamer-conjugated CdTe QDs in the U87MG glioblastoma cell line were assessed with a fluorescence microscope. The obtained results showed that the best conditions for obtaining a high QY of approximately 87% are a pH of 6, a Cd:Te molar ratio of 5:1, and a 30-min reaction time at 100 °C under microwave irradiation. The results showed that AS1141-aptamer-conjugated CdTe QDs could enter tumor cells efficiently. It could be concluded that a facile high-fluorescence-strength QD conjugated with a DNA aptamer, AS1411, which can recognize the extracellular matrix protein nucleolin, can specifically target U87MG human glioblastoma cells. The qualified AS1411-aptamer-conjugated QDs prepared in this study showed excellent capabilities as nanoprobes for cancer targeting and molecular imaging.

Coherent magnetic resonance of nanocrystal quantum-dot luminescence as a window to blinking mechanisms

Blinking of colloidal nanocrystal quantum dots, random intermittency in the stream of photons emitted by single particles, has long commanded the curiosity of researchers. Why does the particle suddenly shut off, and what are the pathways to quench emission? Single-particle microscopy is not the only way to approach these fundamental questions on the interaction of light and matter: time-domain sub-ensemble spectroscopies can also yield relevant information on microscopic electronic processes. We illustrate recent advances in pulsed optically detected magnetic resonance and highlight the conceptual relevance to unravelling mechanisms controlling intermittency on the single-particle level. Magnetic resonance reveals two distinct luminescence quenching channels, which appear to be related to those previously surmised from single-particle studies: a trapped charge-separated state in which the exciton is quenched by dissociation and the particle remains neutral; and a charged state of the particle in which spin-dependent Auger recombination quenches luminescence.

Tunable Optical Anisotropy of Seeded CdSe/CdS Nanorods

We demonstrate structurally tunable optical anisotropy of seeded-growth CdSe/CdS dot-in-rod heterostructures using polarized excitation spectroscopy. The elongated anisotropic CdS shell confers optical anisotropy to the electronic transitions of the CdSe core. Although a rod-shaped shell geometry is a necessary precondition to observing polarized optical properties, the degree of linear polarization is not a strong function of aspect ratio. Rather, tuning the local anisotropy of the emissive core materials by changing the thickness of the anisotropic shell changes the degree of optical anisotropy more dramatically. As the diameter of the core material comprises a greater share (>90%) of the dot-in-rod diameter, the anisotropy of the CdSe core states doubles compared to those for which the core represents <50% of the heterostructure diameter.

Coherent exciton delocalization in strongly coupled quantum dot arrays

Quantum dots (QDs) coupled into disordered arrays have exhibited the intriguing property of bulk-like transport while maintaining discrete excitonic optical transitions. We have utilized ultrafast cross-polarized transient grating (CPTG) spectroscopy to measure electron-hole wave function overlap in CdSe QD films with chemically modified surfaces for tuning inter-QD electronic coupling. By comparing the CPTG decays with those of isolated QDs, we find that excitons coherently delocalize to form excited states more than 200% larger than the QD diameter.

The influence of applied magnetic fields on the optical properties of zero- and one-dimensional CdSe nanocrystals

Shape-dependent exciton relaxation dynamics of CdSe 0-D nanocrystals and 1-D nanorods were studied using low-temperature (4.2 K), time-resolved and intensity-integrated magneto-photoluminscence (MPL) spectroscopy. Analysis of the average MPL rate constants from several different nanocrystal quantum dots and rods excited by 400 nm light in applied magnetic fields up to 17.5 T revealed size-dependent energy gaps separating bright and dark exciton fine-structure states. For 1-D nanorods under strong cross-sectional confinement and large length-to-diameter aspect ratios, efficient mixing of bright and dark exciton states was achieved using relatively low applied field strengths (≤4 T). The effect was attributed, in part, to decreased confinement of CdSe hole states associated with the long axis of the nanorod, which resulted in reduction of the energy gaps separating the bright and dark states. Increased control over the angle formed between the applied field vectors and the nanocrystal c-axis led to more efficient and uniform mixing of nanorod exciton states than for quantum dots. The findings suggest 1-D nanostructures are advantageous over 0-D ones for field-responsive applications.

25th anniversary article: Colloidal quantum dot materials and devices: a quarter-century of advances

Colloidal quantum dot (CQD) optoelectronics offers a compelling combination of low-cost, large-area solution processing, and spectral tunability through the quantum size effect. Since early reports of size-tunable light emission from solution-synthesized CQDs over 25 years ago, tremendous progress has been made in synthesis and assembly, optical and electrical properties, materials processing, and optoelectronic applications of these materials. Here some of the major developments in this field are reviewed, touching on key milestones as well as future opportunities.

Multiple population-period transient spectroscopy (MUPPETS) of CdSe/ZnS nanoparticles. I. Exciton and biexciton dynamics

The nonradiative relaxation of both the exciton and biexciton in CdSe/ZnS core-shell nanoparticles have complicated, nonexponential kinetics. This paper presents data on this system from multiple population-period transient spectroscopy (MUPPETS), a method for two-dimensional kinetics. An initial report of a dispersed (nonexponential) biexciton decay [J. Am. Chem. Soc. 2013, 135, 1002] is confirmed in a more rigorous analysis. Additional transient-grating data allow a quantitative treatment of the full, complex MUPPETS data set. The MUPPETS signal has a strong fluence dependence. With extrapolation to the low fluence limit, the ratio of cross sections for ground-to-exciton and exciton-to-biexciton absorption is found to be close to the predictions of the uncorrelated-electron model. The full two-dimensional MUPPETS data set is reported for the first time and is analyzed to detect heterogeneity in the exciton decay. The exciton has a substantial (>40%) nonradiative decay, but it is not due to a subset of defective particles. A surface relaxation in response to formation of the exciton is suggested. This data set is the first capable of detecting correlations between the biexciton and exciton decay mechanism. None is found.

Fluorescence Intensity and Lifetime Cell Imaging with Luminescent Gold Nanoclusters

In this article, luminescent properties of gold nanoclusters (AuNCs) were studied at the single nanoparticle level and also used as novel imaging agents in cell media. Two types of water-soluble AuNCs which were stabilized with a monolayer composed of either mercaptosuccinic acid (MSA) or tiopronin thiolate ligands were synthesized by a chemical reduction reaction. These AuNCs were determined to have an average core diameter of less than 2 nm. On a time-resolved confocal microscope, the emission signals from the single AuNCs were distinctly recordable. The quantum yields of these AuNCs were measured to be ca. 5%. The lifetime of these AuNCs is also much longer than the lifetime of cellular autofluorescence in lifetime cell imaging as well as the lifetime of organic dye Alexa Fluor 488. After being derivatized with polyethylene glycol (PEG) moieties, the AuNCs were uploaded efficiently in the HeLa cells. Fluorescence intensity and lifetime cell images were recorded on the time-resolved confocal microscope in which the emission from the AuNCs was readily differentiated from the cellular autofluorescence background because of their relatively stronger emission intensities and longer lifetimes. These loaded nanoclusters in the cells were observed to widely distribute throughout the cells and especially densely loaded near the cell nucleuses. The AuNCs in the cells were also tested to have a better photostability relative to the organic fluorophores under the same conditions. We thus conclude that the AuNCs have a great potential as novel nanoparticle imaging agents, especially as lifetime imaging agents, in fluorescence imaging applications. We also prospect much broader applications of these AuNCs after further improvements of their luminescence quantum yields.

Exciton superposition states in CdSe nanocrystals measured using broadband two-dimensional electronic spectroscopy

Coherent superpositions among eigenstates are of interest in fields as diverse as photosynthesis and quantum computation. In this report, we used two-dimensional electronic spectroscopy (2D ES) to measure the decoherence time of a superposition of the two lowest-energy excitons in colloidal CdSe nanocrystals (cubic phase) in solution at room temperature. In the electron-hole representation, the quantum coherence is, remarkably, a twelve-particle correlation. By comparing the measured 2D ES to simulations, we also explored the effects of inhomogeneous broadening and examined the spectroscopic signatures of biexcitons.

Emergent properties resulting from type-II band alignment in semiconductor nanoheterostructures

The development of elegant synthetic methodologies for the preparation of monocomponent nanocrystalline particles has opened many possibilities for the preparation of heterostructured semiconductor nanostructures. Each of the integrated nanodomains is characterized by its individual physical properties, surface chemistry, and morphology, yet, these multicomponent hybrid particles present ideal systems for the investigation of the synergetic properties that arise from the material combination in a non-additive fashion. Of particular interest are type-II heterostructures, where the relative band alignment of their constituent semiconductor materials promotes a spatial separation of the electron and hole following photoexcitation, a highly desirable property for photovoltaic applications. This article highlights recent progress in both synthetic strategies, which allow for material and architectural modulation of novel nanoheterostructures, as well as the experimental work that provides insight into the photophysical properties of type-II heterostructures. The effects of external factors, such as electric fields, temperature, and solvent are explored in conjunction with exciton and multiexciton dynamics and charge transfer processes typical for type-II semiconductor heterostructures.

Artificial atoms on semiconductor surfaces

Semiconductor nanocrystals are called artificial atoms because of their atom-like discrete electronic structure resulting from quantum confinement. Artificial atoms can also be assembled into artificial molecules or solids, thus, extending the toolbox for material design. We address the interaction of artificial atoms with bulk semiconductor surfaces. These interfaces are model systems for understanding the coupling between localized and delocalized electronic structures. In many perceived applications, such as nanoelectronics, optoelectronics, and solar energy conversion, interfacing semiconductor nanocrystals to bulk materials is a key ingredient. Here, we apply the well established theories of chemisorption and interfacial electron transfer as conceptual frameworks for understanding the adsorption of semiconductor nanocrystals on surfaces, paying particular attention to instances when the nonadiabatic Marcus picture breaks down. We illustrate these issues using recent examples from our laboratory.

Electron-hole overlap dictates the hole spin relaxation rate in nanocrystal heterostructures

Hole spin relaxation dynamics in CdTe/CdSe core-shell nanocrystals are measured by an ultrafast polarization transient grating technique. Photoexcited charge separation in type II structures suppresses the electron-hole exchange interaction and the hole spin relaxation time constant is found to increase from ∼0.3  ps to ∼10  ps at 293 K as the CdSe shell thickness increases from ∼0.2  nm to ∼2.4  nm. Analysis of these data suggests that spin relaxation in semiconductor nanostructures is tunable between type I and type II localization according to an electron-hole overlap function.

Nanoparticle detection of respiratory infection

Respiratory viruses are a constant concern for all demographics. Examples include established viruses such as respiratory syncytial virus (RSV), the leading cause of respiratory infection in infants and young children, and emerging viruses such as severe acute respiratory syndrome (SARS), which reached near pandemic levels in 2003, or H1N1 (swine) influenza. Despite this prevalence, traditional methods of virus detection are typically labor intensive and require several days to successfully confirm infection. Recently, however, nanoparticle‐based detection strategies have been employed in an effort to develop detection assays that are both sensitive and expedient. Each of these platforms capitalizes on the unique properties of nanoparticles for the detection of respiratory viruses. In this article, several nanoparticle‐based scaffolds are discussed.Gold nanoparticles (AuNPs) have been functionalized with virus specific antibodies or oligonucleotides. In each of these constructs, AuNPs act as both an easily conjugated scaffolding system for biological molecules and a powerful fluorescence quencher. AuNPs have also been immobilized and used as electrochemical transducers. They efficiently serve as a conducting interface of electrocatalyic activity making them a powerful tool in this application. Quantum dots (QDs) posses unique fluorescence properties that have also been explored for their application to virus detection when combined with direct antibody conjugation or streptavidin‐biotin binding systems. QDs have an advantage over many traditional fluorophores because their fluorescence properties can be finely tuned and they are resistant to photobleaching. The development of these nanoparticle‐based detection strategies holds the potential to be a powerful method to quickly and easily confirm respiratory virus infection. WIREs Nanomed Nanobiotechnol 2010 2 277–290

This article is categorized under: 1

Diagnostic Tools > In Vitro Nanoparticle-Based Sensing

2

Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease