A Facile Synthesis of Azido-Terminated Heterobifunctional Poly(ethylene glycol)s for “Click” Conjugation

Facile Generation of Heterotelechelic Poly(2-Oxazoline)s Towards Accelerated Exploration of Poly(2-Oxazoline)-Based Nanomedicine

Controlling the end-groups of biocompatible polymers is crucial for enabling polymer-based therapeutics and nanomedicine. Typically, end-group diversification is a challenging and time-consuming endeavor, especially for polymers prepared via ionic polymerization mechanisms with limited functional group tolerance. In this study, we present a facile end-group diversification approach for poly(2-oxazoline)s (POx), enabling quick and reliable production of heterotelechelic polymers to facilitate POxylation. The approach relies on the careful tuning of reaction parameters to establish differential reactivity of a pentafluorobenzyl initiator fragment and the living oxazolinium chain-end, allowing the selective introduction of N-, S-, O-nucleophiles via the termination of the polymerization, and a consecutive nucleophilic para-fluoro substitution. The value of this approach for the accelerated development of nanomedicine is demonstrated through the synthesis of well-defined lipid-polymer conjugates and POx-polypeptide block-copolymers, which are well-suited for drug and gene delivery. Furthermore, we investigated the application of a lipid-POx conjugate for the formulation and delivery of mRNA-loaded lipid nanoparticles for immunization against the SARS-COV-2 virus, underscoring the value of POx as a biocompatible polymer platform.

Comprehensive view of microscopic interactions between DNA-coated colloids

The self-assembly of DNA-coated colloids into highly-ordered structures offers great promise for advanced optical materials. However, control of disorder, defects, melting, and crystal growth is hindered by the lack of a microscopic understanding of DNA-mediated colloidal interactions. Here we use total internal reflection microscopy to measure in situ the interaction potential between DNA-coated colloids with nanometer resolution and the macroscopic melting behavior. The range and strength of the interaction are measured and linked to key material design parameters, including DNA sequence, polymer length, grafting density, and complementary fraction. We present a first-principles model that screens and combines existing theories into one coherent framework and quantitatively reproduces our experimental data without fitting parameters over a wide range of DNA ligand designs. Our theory identifies a subtle competition between DNA binding and steric repulsion and accurately predicts adhesion and melting at a molecular level. Combining experimental and theoretical results, our work provides a quantitative and predictive approach for guiding material design with DNA-nanotechnology and can be further extended to a diversity of colloidal and biological systems.

A quantitative prediction of DNA-mediated interactions between colloids is crucial to the design of colloidal structures for optical applications. Cui et al. measure the interaction potential with nanometer resolution and propose a theory to accurately predict adhesion and melting at a molecular level.

Codelivery of Anti-PD-1 Antibody and Paclitaxel with Matrix Metalloproteinase and pH Dual-Sensitive Micelles for Enhanced Tumor Chemoimmunotherapy

Immune checkpoint blockade (ICB) is demonstrating great potential in cancer immunotherapy nowadays. Yet, the low response rate to ICB remains an urgent challenge for tumor immunotherapy. A pH and matrix metalloproteinase dual-sensitive micellar nanocarrier showing spatio-temporally controlled release of anti-PD-1 antibody (aPD-1) and paclitaxel (PTX) in solid tumors is prepared to realize synergistic cancer chemoimmunotherapy. Antitumor immunity can be activated by PTX-induced immunogenic cell death (ICD), while aPD-1 blocks the PD-1/PD-L1 axis to suppress the immune escape due to PTX-induced PD-L1 up-regulation, thus resulting in a synergistic antitumor chemoimmunotherapy. Through decoration with a sheddable polyethylene glycol (PEG) shell, the nanodrug may better accumulate in tumors to boost the synergistic antitumor treatment in a mouse melanoma model. The present study demonstrates a potent antitumor chemoimmunotherapy utilizing tumor microenvironment-sensitive micelles bearing a sheddable PEG layer to mediate site-specific sequential release of aPD-1 and PTX.

DNA-Functionalized 100 nm Polymer Nanoparticles from Block Copolymer Micelles

DNA-mediated self-assembly of colloidal particles is one of the most promising approaches for constructing colloidal superstructures. For nanophotonic materials and devices, DNA-functionalized colloids with diameters of around 100 nm are essential building blocks. Here, we demonstrate a strategy for synthesizing DNA-functionalized polymer nanoparticles (DNA-polyNPs) in the size range of 55-150 nm using block copolymer micelles as a template. Diblock copolymers of polystyrene- b-poly(ethylene oxide) with an azide end group (PS- b-PEO-N₃) are first formed into spherical micelles. Then, the micelle cores are swollen with the styrene monomer and polymerized, thus producing PS NPs with PEO brushes and azide functional end groups. DNA strands are conjugated onto the ends of the PEO brushes through a strain-promoted alkyne-azide cycloaddition reaction, resulting in a DNA density of more than one DNA strand per 12.6 nm² for 70 nm particles. The DNA-polyNPs with complementary sequences enable the formation of CsCl-type colloidal superstructure by DNA binding.

Poly(ethylene glycol) modified Mn2+ complexes as contrast agents with a prolonged observation window in rat MRA

PEGylated Mn²⁺ complexes show higher relaxivity and longer blood circulation time than free Mn²⁺ complexes.

Hydrogel supported chiral imidazolidinone for organocatalytic enantioselective reduction of olefins in water

Chiral products play an important role particularly in the field of medicinal chemistry, where it is known that enantiomers often have very different biological properties and effects. One of the most powerful tool to obtain a product as a single enantiomer is asymmetric catalysis. Recently, organocatalysis, i.e. the use of small organic molecules to catalyze enantioselective transformations, has emerged as a prominent field in asymmetric synthesis. In this work, the use of hydrogels as a support for a chiral imidazolidinone organocatalyst (MacMillan catalyst) and its application in the reduction of activated olefins mediated by the Hantzsch ester is reported for the first time. Results showed a good activity of hydrogels in respect to both yield and enantioselection.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

New glycosylated conjugate copolymer N-acetyl-β-D-glucosaminyl-pluronic: Synthesis, self-assembly and biological assays

This work describes the synthesis of a new glycosylated conjugate copolymer, GlcNAc-PEO75-PPO30-PEO75-GlcNAc (GlcNAc-PluronicF68-GlcNAc), using click chemistry from Pluronic(®) F68 and propargyl-2-N-acetamido-2-deoxy-β-D-glucopyranoside. Micelles were prepared by the self-assembly of GlcNAc-PluronicF68-GlcNAc in phosphate-buffered solution. The critical micelle concentration was determined by fluorescence spectroscopy, and the value was found to be equal to 5.8mgmL(-1). The Gibbs free energy (ΔG) of micellization is negative, indicating that the organization of amphiphiles is governed by the hydrophobic effects in an entropy-driven process. The scattering characterization of GlcNAc-PluronicF68-GlcNAc micelles showed a hydrodynamic radius of 8.7nm and negative zeta potential (-21.0±0.9mV). The TEM image evidences the spherical shape of the objects self-assemble into highly regular micelles having a mean diameter of 10nm. The SAXS profile confirmed the spherical shape of the assemblies comprising a swollen PPO core (Rcore=2.25nm) stabilized by PEO chains following Gaussian statistics. The results of the comet assay showed that the GlcNAc-PluronicF68-GlcNAc micelles were not genotoxic, and the cell viability test was higher than 97% for all concentrations, demonstrating that GlcNAc-PluronicF68-GlcNAc is not toxic.

Synthesis of allyl cellulose in NaOH/urea aqueous solutions and its thiol–ene click reactions

Allyl cellulose can be synthesized from cellulose and allyl chloride in NaOH/urea aqueous solutions and is further used to synthesize a variety of new cellulose derivatives through the thiol–ene click reaction.

Linolenic acid-modified PEG-PCL micelles for curcumin delivery

In this study, a novel linolenic acid-modified poly(ethylene glycol)-b-poly(ϵ-caprolactone) copolymer was prepared through radical addition, ring-opening polymerization, and N-acylation reactions. Its structure was characterized by (1)H NMR and GPC. Micelles were developed by thin-film hydration and used as a delivery system for curcumin with high drug loading capacity of 12.80% and entrapment efficiency of 98.53%. The water solubility of curcumin was increased to 2.05 mg/mL, which was approximately 1.87×10(5) times higher than that of free curcumin. The micelles were spherical shape with an average diameter of 20.8±0.8 nm. X-ray diffraction and FT-IR studies suggested that curcumin existed in the polymeric matrices under π-π conjugation and hydrogen bond interaction with the copolymer. In vitro drug release studies indicated that the curcumin release from linolenic acid-modified copolymer micelles met controlled release, and its release rate was less than that from the linolenic acid-unmodified copolymer micelles. Cytotoxicities against Hela and A-549cells demonstrated that the additional π-π conjugation could affect curcumin's anticancer activity through reducing its release from micelles. Hemolysis test and intravenous irritation test results revealed that the linolenic acid-modified copolymer was safe for intravenous injection. The plasma AUC0-∞ and MRT0-∞ of curcumin-loaded linolenic acid-conjugated poly(ethylene glycol)-b-poly(ϵ-caprolactone) copolymer micelles were 2.75- and 3.49-fold higher than that of control solution, respectively. The CLz was also decreased by 2.75-fold. So, this linolenic acid-modified copolymer might be a carrier candidate for curcumin delivery.

Efficient synthesis of diverse heterobifunctionalized clickable oligo(ethylene glycol) linkers: potential applications in bioconjugation and targeted drug delivery

Herein we describe the sequential synthesis of a variety of azide-alkyne click chemistry-compatible heterobifunctional oligo(ethylene glycol) (OEG) linkers for bioconjugation chemistry applications. Synthesis of these bioorthogonal linkers was accomplished through desymmetrization of OEGs by conversion of one of the hydroxyl groups to either an alkyne or azido functionality. The remaining distal hydroxyl group on the OEGs was activated by either a 4-nitrophenyl carbonate or a mesylate (-OMs) group. The -OMs functional group served as a useful precursor to form a variety of heterobifunctionalized OEG linkers containing different highly reactive end groups, e.g., iodo, -NH(2), -SH and maleimido, that were orthogonal to the alkyne or azido functional group. Also, the alkyne- and azide-terminated OEGs are useful for generating larger discrete poly(ethylene glycol) (PEG) linkers (e.g., PEG(16) and PEG(24)) by employing a Cu(I)-catalyzed 1,3-dipolar cycloaddition click reaction. The utility of these clickable heterobifunctional OEGs in bioconjugation chemistry was demonstrated by attachment of the integrin (α(v)β(3)) receptor targeting peptide, cyclo-(Arg-Gly-Asp-D-Phe-Lys) (cRGfKD) and to the fluorescent probe sulfo-rhodamine B. The synthetic methodology presented herein is suitable for the large scale production of several novel heterobifunctionalized OEGs from readily available and inexpensive starting materials.

Convenient synthesis of heterobifunctional poly(ethylene glycol) suitable for the functionalization of iron oxide nanoparticles for biomedical applications

A straightforward route is proposed for the multi-gram scale synthesis of heterobifunctional poly(ethylene glycol) (PEG) oligomers containing combination of triethyloxysilane extremity for surface modification of metal oxides and amino or azido active end groups for further functionalization. The suitability of these PEG derivatives to be conjugated to nanomaterials was shown by pegylation of ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles (NPs), followed by functionalization with small peptide ligands for biomedical applications.

Well-defined degradable brush polymer-drug conjugates for sustained delivery of Paclitaxel

To achieve a conjugated drug delivery system with high drug loading but minimal long-term side effects, a degradable brush polymer-drug conjugate (BPDC) was synthesized through azide-alkyne click reaction of acetylene-functionalized polylactide (PLA) with azide-functionalized paclitaxel (PTXL) and poly(ethylene glycol) (PEG). Well-controlled structures of the resulting BPDC and its precursors were verified by (1)H NMR and gel permeation chromatography (GPC) characterizations. With nearly quantitative click efficiency, drug loading amount of the BPDC reached 23.2 wt %. Both dynamic light scattering (DLS) analysis and transmission electron microscopy (TEM) imaging indicated that the BPDC had a nanoscopic size around 10-30 nm. The significant hydrolytic degradability of the PLA backbone of the BPDC was confirmed by GPC analysis of its incubated solution. Drug release study showed that PTXL moieties can be released through the cleavage of the hydrolyzable conjugation linkage in pH 7.4 at 37 °C, with 50% release in about 22 h. As illustrated by cytotoxicity study, while the polymeric scaffold of the BPDC is nontoxic, the BPDC exhibited higher therapeutic efficacy toward MCF-7 cancer cells than free PTXL at 0.1 and 1 μg/mL. Using Nile red as encapsulated fluorescence probe, cell uptake study showed effective internalization of the BPDC into the cells.

Synthesis and evaluation of clickable block copolymers for targeted nanoparticle drug delivery

Polymeric nanoparticles with multifunctional capabilities, including surface functionalization, hold great promise to address challenges in targeted drug delivery. Here, we describe a concise, robust synthesis of a heterofunctional polyethylene glycol (PEG), HO-PEG-azide. This macromer was used to synthesize polylactide (PLA)-PEG-azide, a functional diblock copolymer. Rapid precipitation of this copolymer with a hydrophobic cargo resulted in the generation of monodisperse nanoparticles with azides in the surface corona. To demonstrate conjugation to these nanoparticles, a regioselectively modified alkyne-folate was employed as a model small molecule ligand, and the artificial protein A1 with an alkyne moiety introduced by unnatural amino acid substitution was selected as a model macromolecular ligand. Using the copper-catalyzed azide-alkyne ligation reaction, both ligands exhibited good conjugation efficiency even when low concentrations of ligands were used.

Hierarchical self-assembly of amphiphilic semiconducting polymers into isolated, bundled, and branched nanofibers

Herein, we report a high-yield click synthesis and self-assembly of conjugated amphiphilic block copolymers of polythiophene (PHT) and polyethylene glycol (PEG) and their superstructures. A series of different length PHT(m)-b-PEG(n) with well-defined relative block lengths was synthesized by a click-coupling reaction and self-assembled into uniform and stably suspended nanofibers in selective solvents. The length of nanofibers was controllable by varying the relative block lengths while keeping other dimensions and optical properties unaffected for a broad range of f(PHT) (0.41 to 0.82), which indicates that the packing of PHT dominates the self-assembly of PHT(m)-b-PEG(n). Furthermore, superstructures of bundled and branched nanofibers were fabricated through the self-assembly of PHT(m)-b-PEG(n) and preformed PHT nanofibers. The shape, length, and density of the hierarchical assembly structures can be controlled by varying the solvent quality, polymer lengths, and block copolymer/homopolymer ratio. This work demonstrates that complex superstructures of organic semiconductors can be fabricated through the bottom-up approach using preformed nanofibers as building blocks.

Synthesis of star and H-shape polymersvia a combination of cobalt-mediated radical polymerization and nitrone-mediated radical coupling reactions

Via the combination of nitrone-mediated radical coupling and cobalt-mediated radical polymerization, mid-chain functionalized polymers are obtained that can be assembled into H-shaped polymers.

N-heterocyclic carbene-induced zwitterionic ring-opening polymerization of ethylene oxide and direct synthesis of alpha,omega-difunctionalized poly(ethylene oxide)s and poly(ethylene oxide)-b-poly(epsilon-caprolactone) block copolymers

An N-heterocyclic carbene (NHC), namely, 1,3-bis-(diisopropyl)imidazol-2-ylidene (1), was demonstrated to bring about the metal-free ring-opening polymerization of ethylene oxide at 50 degrees C in dimethyl sulfoxide, in absence of any other reagents. Poly(ethylene oxide) (PEO) of polydispersities <1.2 and molar masses perfectly matching the [monomer]/[(1)] ratio could thus be obtained in quantitative yields, attesting to the controlled/living character of such carbene-initiated polymerizations. It is argued that (1) adds to ethylene oxide to form a zwitterionic species, namely 1,3-bis-(diisopropyl)imidazol-2-ylidinium alkoxide, that further propagates by a zwitterionic ring-opening polymerization (ZROP) mechanism. Through an appropriate choice of terminating agent NuH or NuSiMe(3) at the completion of the polymerization, a variety of end-functionalized PEO chains could be generated. In particular, alpha,omega-bis(hydroxy)-telechelic PEO, alpha-benzyl,omega-hydroxy, and alpha-azido,omega-hydroxy-difunctionalized PEOs were synthesized by NHC (1)-initiated ZROP, using H(2)O, PhCH(2)OH, and N(3)SiMe(3) as terminating agent, respectively. Characterization of these alpha,omega-difunctionalized PEOs by techniques such as (1)H NMR spectroscopy, MALDI-TOF spectrometry, and size exclusion chromatography confirmed the quantitative introduction of functional groups at both alpha and omega positions of the PEO chains and the formation of very narrow molar mass polymers. Finally, the synthesis of a poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymer by sequential ZROP of the corresponding monomers was successfully achieved using (1) as organic initiator without isolation of the PEO block intermediate.

PEGylated polymers for medicine: from conjugation to self-assembled systems

Synthetic polymers have transformed society in many areas of science and technology, including recent breakthroughs in medicine. Synthetic polymers now offer unique and versatile platforms for drug delivery, as they can be "bio-tailored" for applications as implants, medical devices, and injectable polymer-drug conjugates. However, while several currently used therapeutic proteins and small molecule drugs have benefited from synthetic polymers, the full potential of polymer-based drug delivery platforms has not yet been realized. This review examines both general advantages and specific cases of synthetic polymers in drug delivery, focusing on PEGylation in the context of polymer architecture, self-assembly, and conjugation techniques that show considerable effectiveness and/or potential in therapeutics.