Unimolecular micelles based on hydrophobically derivatized hyperbranched polyglycerols: biodistribution studies

Branched Poly(ε-caprolactone)-Based Copolyesters of Different Architectures and Their Use in the Preparation of Anticancer Drug-Loaded Nanoparticles

Limitations associated with the use of linear biodegradable polyesters in the preparation of anticancer nano-based drug delivery systems (nanoDDS) have turned scientific attention to the utilization of branched-chain (co-)polymers. In this context, the present study evaluates the use of novel branched poly(ε-caprolactone) (PCL)-based copolymers of different architectures for the preparation of anticancer nanoparticle (NP)-based formulations, using paclitaxel (PTX) as a model drug. Specifically, three PCL-polyol branched polyesters, namely, a three-arm copolymer based on glycerol (PCL-GLY), a four-arm copolymer based on pentaerythritol (PCL-PE), and a five-arm copolymer based on xylitol (PCL-XYL), were synthesized via ring-opening polymerization and characterized by proton nuclear magnetic resonance (¹H-NMR), gel permeation chromatography (GPC), intrinsic viscosity, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy and cytotoxicity. Then, PTX-loaded NPs were prepared by an oil-in-water emulsion. The size of the obtained NPs varied from 200 to 300 nm, while the drug was dispersed in crystalline form in all formulations. High encapsulation efficiency and high yields were obtained in all cases, while FTIR analysis showed no molecular drug polymer. Finally, in vitro drug release studies showed that the studied nanocarriers significantly enhanced the dissolution rate and extent of the drug.

Effect of side-chain length on solute encapsulation by amphiphilic heterografted brush copolymers

Anisotropic nanomaterials are non-spherical structures that possess unique shape-dependent physicochemical properties and functionalities. Inspired by the abundance of filamentous entities in nature, cylindrical nanostructures have gained significant attention due to their unique performance. Herein, we discuss the effect of side-chain length on the encapsulation properties of amphiphilic heterografted bottlebrushes. We observed that by grafting a long hydrophilic block to the double-brush, we were able to restrict solute-induced conformational changes, thus producing drug-loaded anisotropic carriers. Unimolecular encapsulation in brushes was solute-dependent as shown here for probucol and rose bengal lactone. Stabilization with an amphiphilic diblock copolymer-consisting of the same type of blocks as those comprising the heterografted brush-served to explain the solute-dependent behavior observed for brushes, suggesting that solutes with a higher propensity to nucleation could be more effectively stabilized by the anisotropic carrier in a unimolecular worm-like construct.

Pseudo-branched polyester copolymer: an efficient drug delivery system to treat cancer

In this study, a new hyperbranched polyester copolymer was designed using a proprietary monomer and diethylene glycol or triethylene glycol as monomers. The synthesis was carried out using standard melt polymerization technique and catalyzed by p-tolulenesulfonic acid. The progress of the reaction was monitored with respect to time and negative pressure, with samples being subjected to standard characterization protocols. The resulting polymers were purified using the solvent precipitation method and characterized using various chromatographic and spectroscopic methods including GPC, MALDI-TOF, and NMR. We have observed polymers with a molecular weight of 29 643 Da and 33 996 Da, which is ideal to be used as a drug delivery system. Thus, these polymers were chosen for further modification into folate-functionalized polymeric nanoparticles for the targeted treatment of cancer, in this case we have chosen prostate cancer cells as a model. We hypothesized that due to the 3D structure of the A2B monomer, we expect a pseudo-branched polymer that is globular in shape which will be ideal for drug carrying and delivery. We used a solvent diffusion method for the one-pot formulation of water-dispersable polymeric nanoparticles as well as theraputic drug (doxorubicin) encapsulation. The efficacy of this delivery system was gauged by treating LNCaP cells with the drug-loaded nanoparticles and assessing the results of the treatment. The results were analyzed by cytotoxicity (MTT) assays, drug release studies, and fluorescence microscopy. The experimental results collectively show a nanoparticle that was biocompatible, target-specific, and successfully initiated apoptosis in an in vitro prostate cancer model.

PEGylation as a strategy for improving nanoparticle-based drug and gene delivery

Coating the surface of nanoparticles with polyethylene glycol (PEG), or "PEGylation", is a commonly used approach for improving the efficiency of drug and gene delivery to target cells and tissues. Building from the success of PEGylating proteins to improve systemic circulation time and decrease immunogenicity, the impact of PEG coatings on the fate of systemically administered nanoparticle formulations has, and continues to be, widely studied. PEG coatings on nanoparticles shield the surface from aggregation, opsonization, and phagocytosis, prolonging systemic circulation time. Here, we briefly describe the history of the development of PEGylated nanoparticle formulations for systemic administration, including how factors such as PEG molecular weight, PEG surface density, nanoparticle core properties, and repeated administration impact circulation time. A less frequently discussed topic, we then describe how PEG coatings on nanoparticles have also been utilized for overcoming various biological barriers to efficient drug and gene delivery associated with other modes of administration, ranging from gastrointestinal to ocular. Finally, we describe both methods for PEGylating nanoparticles and methods for characterizing PEG surface density, a key factor in the effectiveness of the PEG surface coating for improving drug and gene delivery.

Progesterone binding nano-carriers based on hydrophobically modified hyperbranched polyglycerols

Progesterone (Pro) is a potent neurosteroid and promotes recovery from moderate Traumatic Brain Injury but its clinical application is severely impeded by its poor water solubility. Here we demonstrate that reversibly binding Pro within hydrophobically modified hyperbranched polyglycerol (HPG-Cn-MPEG) enhances its solubility, stability and bioavailability. Synthesis, characterization and Pro loading into HPG-Cn-MPEG is described. The release kinetics are correlated with structural properties and the results of Differential Scanning Calorimetry studies of a family of HPG-Cn-MPEGs of varying molecular weight and alkylation. While the maximum amount of Pro bound correlates well with the amount of alkyl carbon per molecule contributing to its hydrophobicity, the dominant first order rate constant for Pro release correlates strongly with the amount of structured or bound water in the dendritic domain of the polymer. The results provide evidence to justify more detailed studies of interactions with biological systems, both single cells and in animal models.

In vitro stability and cytotoxicity analysis of liposomes anchored with octylamine-graft-poly (aspartic)

Due to the polymer, octylamine-graft-poly (aspartic) (PASP-g-C₈), which acted as acidic triggered molecules, liposomes anchored with PASP-g-C₈ (OPLPs) could be safe and efficient pH sensitive drug carriers and target tumor cells.

Self-assemblies of amphiphilic homopolymers: synthesis, morphology studies and biomedical applications

The need for a simplified access to supramolecular assemblies with enhanced tenability has led to the development of amphiphilic homopolymers (APHPs). This review highlights recent advances and future trends in APHP design, self-assembly, and biomedical applications.

Co-assembly of two types of complementary dendritic units into amphiphilic supramolecular complexes capable of hosting guest molecules

Novel amphiphilic supramolecular complexes with two types of complementary dendritic units could encapsulate hydrophilic guests with excellent aggregating encapsulation performances.

Enhanced immunogenicity of multivalent MUC1 glycopeptide antitumour vaccines based on hyperbranched polymers

A fully synthetic multivalent MUC1 glycopeptide vaccine based on a hyperbranched polyglycerol core induced IgG antibodies which strongly recognise epithelial tumour cells.

Synthesis and therapeutic applications of biocompatible or biodegradable hyperbranched polymers

The recent progress in the synthesis, modifications and therapeutic applications of biocompatible or biodegradable hyperbranched polymers has been reviewed.

Understanding Self-Segregation of Immiscible Peripheral Segments in Pseudodendritic Hyperbranched Polydithioacetals: Formation of Improved Janus Structures

Peripherally heterofunctionalized hyperbranched polymers (HBPs) undergo immiscibility-driven self-segregation of the outer segments to form Janus molecular entities (Macromolecules 2012, 45, 2348). In HBPs prepared via AB₂ type self-condensation, single-step peripheral heterofunctionalization would lead to random distribution of the two types of terminal units, namely, homofunctionalized (homo-T) and heterofunctionalized (hetero-T) termini. Here, we examine the role of such hetero-T units on the self-segregation of heterofunctionalized pseudodendritic hyperbranched polydithioacetals. Three different heterofunctionalized HB dithioacetals bearing roughly 50 mol % each of docsyl (C-22) and MPEG-350 chains at the periphery were prepared: one of them carried a statistical distribution of homo-T and hetero-T units, and the other carried only two types of homo-T (-TR₁R₁ and -TR₂R₂) termini, whereas the third carried largely hetero-T (-TR₁R₂) termini. Careful examination of DSC and SAXS data reveals that the self-segregation is most effective in HBPs devoid of hetero-T units; interestingly, however, it also showed that randomly heterofunctionalized HBPs self-segregated nearly as effectively.

PEG-Polypeptide Dual Brush Block Copolymers: Synthesis and Application in Nanoparticle Surface PEGylation

Amphiphilic polypeptide-containing hybrid dual brush block copolymers with controlled molecular weights and narrow molecular weight distributions were synthesized in one pot via ring-opening metathesis polymerization of sequentially added norbornyl-PEG and N-(2-((trimethylsilyl)amino)ethyl)-5-norbornene-endo-2,3-dicarboximide (M1) followed by ring-opening polymerization of amino acid N-carboxyanhydrides. Polylactide nanoparticles coated with these am phiphilic dual brush block copolymers showed significantly improved stability in PBS solution compared to those coated with amphiphilic linear block copolymers such as PEG-polylactide and PEG-polypeptides.

A bifunctional nanocarrier based on amphiphilic hyperbranched polyglycerol derivatives

We here report on the synthesis of a bifunctional nanocarrier system based on amphiphilic hyperbranched polyglycerol (hPG), which is modified by introducing hydrophobic aromatic groups to the core and retaining hydrophilic groups in the shell. "Selective chemical differentiation" and chemo-enzymatic reaction strategies were used to synthesize this new core-shell type nanocarrier. The system shows an innovative bifunctional carrier capacity with both polymeric and unimolecular micelle-like transport properties. Hydrophobic guest molecules such as pyrene were encapsulated into the hydrophobic core of modified hPG via hydrophobic interactions as well as π-π stacking, analogous to a unimolecular micelle system. A second guest molecule, which has a high affinity to the shell like nile red, was solubilized in the outer shell of the host molecule, thus connecting the nanocarrier molecules to form aggregates. This model is confirmed by UV-Vis, fluorescence, atomic force microscopy, and dynamic light scattering, as well as release studies triggered by pH-changes and enzymes. Encapsulated guest molecules, respectively in the core and in the shell, present different controlled release profiles. The bifunctional nanocarrier system is a promising candidate for simultaneous delivery of different hydrophobic drugs for a combination therapy, e.g., in tumor treatment.

Sugar-decorated dendritic nanocarriers: encapsulation and release of the octahedral rhenium cluster complex [Re6S8(OH)6]4-

The encapsulation of a nanometer-sized octahedral anionic rhenium cluster complex with six terminal hydroxo ligands [Re(6)S(8)(OH)(6)](4-) in maltose-decorated poly(propylene amine) dendrimers (POPAM, generation 4 and 5) has been investigated. Ultrafiltration experiments showed that maximal loading capacity of the dendrimers with the cluster complex is achieved after about ten hours in aqueous solution. To study the inclusion phenomena, three different methods have been applied: UV/Vis, time-resolved laser-induced fluorescence spectroscopy (TRLFS), and laser-induced liquid bead ion desorption mass spectrometry (LILBID-MS). From the results obtained, it could be concluded that: a) the hydrolytic stability of the rhenium cluster complex is significantly enhanced in the presence of dendritic hosts; b) the cluster anions are preferentially bound inside the dendrimers; c) the number of cluster complexes encapsulated in the dendrimers increases with rising dendrimer generation. On average, four to five cluster anions can preferentially be captured in the interior of sugar-coated dendritic carriers. An asymptotic progression of the release of cluster complexes from the loaded dendrimers was observed under physiologically relevant conditions (isotonic sodium chloride solution: approximately 93 % within 4 days for loaded POPAM-G4-maltose; approximately 86 % within 4 days for loaded POPAM-G5-maltose). These encapsulation and release properties of maltose-decorated nanocarriers imply the possibility for the development of the next generation of dendritic nanocarriers with specific targeting of destined tissue for therapeutic treatments.

Synthesis and characterization of carboxylic acid conjugated, hydrophobically derivatized, hyperbranched polyglycerols as nanoparticulate drug carriers for cisplatin

Hyperbranched polyglycerols (HPGs) with hydrophobic cores and derivatized with methoxy poly(ethylene glycol) were synthesized and further functionalized with carboxylate groups to bind and deliver cisplatin. Low and high levels of carboxylate were conjugated to HPGs (HPG-C(8/10)-MePEG(6.5)-COOH(113) and HPG-C(8/10)-MePEG(6.5)-COOH(348)) and their structures were confirmed through NMR and FTIR spectroscopy and potentiometric titration. The hydrodynamic diameter of the HPGs ranged from 5-10 nm and the addition of COOH groups decreased the zeta potential of the polymers. HPG-C(8/10)-MePEG(6.5)-COOH(113) bound up to 10% w/w cisplatin, whereas HPG-C(8/10)-MePEG(6.5)-COOH(348) bound up to 20% w/w drug with 100% efficiency. Drug was released from HPG-C(8/10)-MePEG(6.5)-COOH(113) over 7 days at the same rate, regardless of the pH. Cisplatin release from HPG-C(8/10)-MePEG(6.5)-COOH(348) was significantly slower than HPG-C(8/10)-MePEG(6.5)-COOH(113) at pH 6 and 7.4, but similar at pH 4.5. Release of cisplatin into artificial urine was considerably faster than into buffer. Carboxylated HPGs demonstrated good biocompatibility, and drug-loaded HPGs effectively inhibited proliferation of KU-7-luc bladder cancer cells.

Development and in vitro characterization of paclitaxel and docetaxel loaded into hydrophobically derivatized hyperbranched polyglycerols

In this study we report the development and in vitro characterization of paclitaxel (PTX) and docetaxel (DTX) loaded into hydrophobically derivatized hyperbranched polyglycerols (HPGs). Several HPGs derivatized with hydrophobic groups (C(8/10) alkyl chains) (HPG-C(8/10)-OH) and/or methoxy polyethylene glycol (MePEG) chains (HPG-C(8/10)-MePEG) were synthesized. PTX or DTX were loaded into these polymers by a solvent evaporation method and the resulting nanoparticle formulations were characterized in terms of size, drug loading, stability, release profiles, cytotoxicity, and cellular uptake. PTX and DTX were found to be chemically unstable in unpurified HPGs and large fractions (∼80%) of the drugs were degraded during the preparation of the formulations. However, both PTX and DTX were found to be chemically stable in purified HPGs. HPGs possessed hydrodynamic radii of less than 10nm and incorporation of PTX or DTX did not affect their size. The release profiles for both PTX and DTX from HPG-C(8/10)-MePEG nanoparticles were characterized by a continuous controlled release with little or no burst phase of release. In vitro cytotoxicity evaluations of PTX and DTX formulations demonstrated a concentration-dependent inhibition of proliferation in KU7 cell line. Cellular uptake studies of rhodamine-labeled HPG (HPG-C(8/10)-MePEG(13)-TMRCA) showed that these nanoparticles were rapidly taken up into cells, and reside in the cytoplasm without entering the nuclear compartment and were highly biocompatible with the KU7 cells.

Self-assembly of hyperbranched polymers and its biomedical applications

Hyperbranched polymers (HBPs) are highly branched macromolecules with a three-dimensional dendritic architecture. Due to their unique topological structure and interesting physical/chemical properties, HBPs have attracted wide attention from both academia and industry. In this paper, the recent developments in HBP self-assembly and their biomedical applications have been comprehensively reviewed. Many delicate supramolecular structures from zero-dimension (0D) to three-dimension (3D), such as micelles, fibers, tubes, vesicles, membranes, large compound vesicles and physical gels, have been prepared through the solution or interfacial self-assembly of amphiphilic HBPs. In addition, these supramolecular structures have shown promising applications in the biomedical areas including drug delivery, protein purification/detection/delivery, gene transfection, antibacterial/antifouling materials and cytomimetic chemistry. Such developments promote the interdiscipline researches among surpramolecular chemistry, biomedical chemistry, nano-technology and functional materials.

Self-assembled micelles from an amphiphilic hyperbranched copolymer with polyphosphate arms for drug delivery

A novel type of amphiphilic hyperbranched multiarm copolymer [H40-star-(PLA-b-PEP-OH)] was synthesized through a two-step ring-opening polymerization (ROP) procedure and applied to drug delivery. First, Boltorn H40 was used as macroinitiator for the ROP of L-lactide to form the intermediate (H40-star-PLA-OH). Then, the ROP of ethyl ethylene phosphate was further initiated to produce H40-star-(PLA-b-PEP-OH). The resulting hyperbranched multiarm copolymers were characterized by (1)H, (13)C, and (31)P NMR, GPC, and FTIR spectra. Benefiting from the amphiphilic structure, H40-star-(PLA-b-PEP-OH) was able to self-assemble into micelles in water with an average diameter of 130 nm. In vitro evaluation of these micelles demonstrated their excellent biocompatibility and efficient cellular uptake by methyl tetrazolium assay, flow cytometry, and confocal laser scanning microscopy measurements. Doxorubicin-loaded micelles were investigated for the proliferation inhibition of a Hela human cervical carcinoma cell line, and the Doxorubicin dose required for 50% cellular growth inhibition was found to be 1 microg/mL. These results indicate that H40-star-(PLA-b-PEP-OH) micelles can be used as safe, promising drug-delivery systems.

Nanomicellar formulations for sustained drug delivery: strategies and underlying principles

Micellar delivery systems smaller than 100 nm can be readily prepared. While micelles allow a great depth of tissue penetration for targeted drug delivery, they usually disintegrate rapidly in the body. Thus, sustained drug delivery from micellar nanocarriers is a challenge. This article summarizes various key strategies and underlying principles for sustained drug delivery using micellar nanocarriers. Comparisons are made with other competing delivery systems such as polymeric microparticles and nanoparticles. Amphiphilic molecules self-assemble in appropriate liquid media to form nanoscale micelles. Strategies for sustained release nanomicellar carriers include use of prodrugs, drug polymer conjugates, novel polymers with low critical micellar concentration or of a reverse thermoresponsive nature, reverse micelles, multi-layer micelles with layer by layer assembly, polymeric films capable of forming micelles in vivo and micelle coats on a solid support. These new micellar systems are promising for sustained drug delivery.

Adsorption of amphiphilic hyperbranched polyglycerol derivatives onto human red blood cells

Hydrophobically derivatized hyperbranched polyglycerol (HPG)-polyethylene glycol (PEG) polymers bearing stearoyl chains (HPG-C18-PEG) were originally developed as human serum albumin substitutes and further as a unimolecular drug delivery system. In view of these in vivo applications and the potential for membrane interaction by these materials due to their amphiphilic structure, determining the adsorption of the polymers to human red blood cells (RBCs) is an important issue. This paper reports on the in vitro adsorption to RBCs of tritium-radiolabeled HPG-C18-PEG polymers. The morphological changes of RBCs associated with the adsorption were also examined by light and scanning electron microscopy (SEM). Laser scanning confocal microscopy (LSCM) suggests that the binding site of the polymers on RBCs is the cell membrane. Adsorption experiments show that, in the medium of either saline or plasma, the binding amount of the polymers to RBCs increases with increased polymer concentration in a manner which implies simple Langmurian behavior. The binding amount in saline is of the order of 10(5) molecules/cell at an equilibrium concentration of 1 mg/mL of HPG-C18-PEG polymer. The RBC morphology depends on the adsorbed amount; the cells become crenated in high concentrations (5 and 10 mg/mL) of the polymer solutions in the absence of plasma proteins. Interestingly, a large amount of polymers remain bound to RBCs even after washes with plasma (of the order of 10(4) molecules/cell). Thus, the bound polymers might have an extended circulating time by "hitchhiking" on RBCs in the bloodstream. These results provide significant information and insight for related studies of the interaction of amphiphilic molecules with cell membranes and for in vivo applications of biopolymers as drug delivery systems.