EcoRV restriction endonuclease binds all DNA sequences with equal affinity

Microscopic insight to specificity of metal ion cofactor in DNA cleavage by restriction endonuclease EcoRV

Restriction endonucleases protect bacterial cells against bacteriophage infection by cleaving the incoming foreign DNA into fragments. In presence of Mg²⁺ ions, EcoRV is able to cleave the DNA but not in presence of Ca²⁺ , although the protein binds to DNA in presence of both metal ions. We make an attempt to understand this difference using conformational thermodynamics. We calculate the changes in conformational free energy and entropy of conformational degrees of freedom, like DNA base pair steps and dihedral angles of protein residues in Mg²⁺ (A)-EcoRV-DNA complex compared to Ca²⁺ (S)-EcoRV-DNA complex using all-atom molecular dynamics (MD) trajectories of the complexes. We find that despite conformational stability and order in both complexes, the individual degrees of freedom behave differently in the presence of two different metal ions. The base pairs in cleavage region are highly disordered in Ca²⁺ (S)-EcoRV-DNA compared to Mg²⁺ (A)-EcoRV-DNA. One of the acidic residues ASP90, coordinating to the metal ion in the vicinity of the cleavage site, is conformationally destabilized and disordered, while basic residue LYS92 gets conformational stability and order in Ca²⁺ (S) bound complex than in Mg²⁺ (A) bound complex. The enhanced fluctuations hinder placement of the metal ion in the vicinity of the scissile phosphate of DNA. Similar loss of conformational stability and order in the cleavage region is observed by the replacement of the metal ion. Considering the placement of the metal ion near scissile phosphate as requirement for cleavage action, our results suggest that the changes in conformational stability and order of the base pair steps and the protein residues lead to cofactor sensitivity of the enzyme. Our method based on fluctuations of microscopic conformational variables can be applied to understand enzyme activities in other protein-DNA systems.

Inhibition of Excision of Oxidatively Generated Hydantoin DNA Lesions by NEIL1 by the Competitive Binding of the Nucleotide Excision Repair Factor XPC-RAD23B

The interplay between nucleotide excision repair (NER) and base excision repair (BER) of nonbulky, oxidatively generated DNA lesions has long been a subject of significant interest. The hydantoin oxidation products of 8-oxoguanine, spiroiminodihydantoin (Sp) and 5-guanidinohydantoin (Gh), are substrates of both BER and NER in HeLa cell extracts and human cells [Shafirovich, V., et al. (2019) Chem. Res. Toxicol. 32, 753-761]. The primary factor that recognizes DNA lesions is the DNA damage-sensing factor XPC-RAD23B (XPC), while the glycosylase NEIL1 is known to remove Gh and Sp lesions from double-stranded DNA. It is shown here that in aqueous solutions containing nanomolar concentrations of proteins, XPC and NEIL1 compete for binding to 147-mer oligonucleotide duplexes that contain single Gh or Sp lesions under conditions of [protein] ≫ [DNA], thus inhibiting the rate of BER catalyzed by NEIL1. The non-covalently bound NEIL1 molecules can be displaced by XPC at concentration ratios R = [XPC]/[NEIL1] > 0.2, while full displacement of NEIL1 is observed at R ≥ 0.5. In the absence of XPC and under single-turnover conditions, only the burst phase is observable. However, with a progressive increase in the XPC concentration, the amplitude of the burst phase decreases gradually, and a slower time-dependent phase of incision product formation manifests itself with rate constants of 3.0 × 10^-3 s^-1 (Gh) and 0.90 × 10^-3 s^-1 (Sp). These slow kinetics are attributed to the dissociation of XPC-DNA complexes that allow for the rebinding of NEIL1 to the temporarily exposed Gh or Sp lesions, and the incisions observed under these steady-state conditions.

CgII cleaves DNA using a mechanism distinct from other ATP-dependent restriction endonucleases

The restriction endonuclease CglI from Corynebacterium glutamicum recognizes an asymmetric 5′-GCCGC-3′ site and cleaves the DNA 7 and 6/7 nucleotides downstream on the top and bottom DNA strands, respectively, in an NTP-hydrolysis dependent reaction. CglI is composed of two different proteins: an endonuclease (R.CglI) and a DEAD-family helicase-like ATPase (H.CglI). These subunits form a heterotetrameric complex with R₂H₂ stoichiometry. However, the R₂H_2·CglI complex has only one nuclease active site sufficient to cut one DNA strand suggesting that two complexes are required to introduce a double strand break. Here, we report studies to evaluate the DNA cleavage mechanism of CglI. Using one- and two-site circular DNA substrates we show that CglI does not require two sites on the same DNA for optimal catalytic activity. However, one-site linear DNA is a poor substrate, supporting a mechanism where CglI complexes must communicate along the one-dimensional DNA contour before cleavage is activated. Based on experimental data, we propose that adenosine triphosphate (ATP) hydrolysis by CglI produces translocation on DNA preferentially in a downstream direction from the target, although upstream translocation is also possible. Our results are consistent with a mechanism of CglI action that is distinct from that of other ATP-dependent restriction-modification enzymes.

Metal Ion Binding at the Catalytic Site Induces Widely Distributed Changes in a Sequence Specific Protein-DNA Complex

Metal ion cofactors can alter the energetics and specificity of sequence specific protein–DNA interactions, but it is unknown if the underlying effects on structure and dynamics are local or dispersed throughout the protein–DNA complex. This work uses EcoRV endonuclease as a model, and catalytically inactive lanthanide ions, which replace the Mg²⁺ cofactor. Nuclear magnetic resonance (NMR) titrations indicate that four Lu³⁺ or two La³⁺ cations bind, and two new crystal structures confirm that Lu³⁺ binding is confined to the active sites. NMR spectra show that the metal-free EcoRV complex with cognate (GATATC) DNA is structurally distinct from the nonspecific complex, and that metal ion binding sites are not assembled in the nonspecific complex. NMR chemical shift perturbations were determined for ¹H–¹⁵N amide resonances, for ¹H–¹³C Ile-δ-CH₃ resonances, and for stereospecifically assigned Leu-δ-CH₃ and Val-γ-CH₃ resonances. Many chemical shifts throughout the cognate complex are unperturbed, so metal binding does not induce major conformational changes. However, some large perturbations of amide and side chain methyl resonances occur as far as 34 Å from the metal ions. Concerted changes in specific residues imply that local effects of metal binding are propagated via a β-sheet and an α-helix. Both amide and methyl resonance perturbations indicate changes in the interface between subunits of the EcoRV homodimer. Bound metal ions also affect amide hydrogen exchange rates for distant residues, including a distant subdomain that contacts DNA phosphates and promotes DNA bending, showing that metal ions in the active sites, which relieve electrostatic repulsion between protein and DNA, cause changes in slow dynamics throughout the complex.

Selective microbial genomic DNA isolation using restriction endonucleases

To improve the metagenomic analysis of complex microbiomes, we have repurposed restriction endonucleases as methyl specific DNA binding proteins. As an example, we use DpnI immobilized on magnetic beads. The ten minute extraction technique allows specific binding of genomes containing the DpnI Gm6ATC motif common in the genomic DNA of many bacteria including γ-proteobacteria. Using synthetic genome mixtures, we demonstrate 80% recovery of Escherichia coli genomic DNA even when only femtogram quantities are spiked into 10 µg of human DNA background. Binding is very specific with less than 0.5% of human DNA bound. Next Generation Sequencing of input and enriched synthetic mixtures results in over 100-fold enrichment of target genomes relative to human and plant DNA. We also show comparable enrichment when sequencing complex microbiomes such as those from creek water and human saliva. The technique can be broadened to other restriction enzymes allowing for the selective enrichment of trace and unculturable organisms from complex microbiomes and the stratification of organisms according to restriction enzyme enrichment.

Type II restriction endonucleases--a historical perspective and more

This article continues the series of Surveys and Summaries on restriction endonucleases (REases) begun this year in Nucleic Acids Research. Here we discuss 'Type II' REases, the kind used for DNA analysis and cloning. We focus on their biochemistry: what they are, what they do, and how they do it. Type II REases are produced by prokaryotes to combat bacteriophages. With extreme accuracy, each recognizes a particular sequence in double-stranded DNA and cleaves at a fixed position within or nearby. The discoveries of these enzymes in the 1970s, and of the uses to which they could be put, have since impacted every corner of the life sciences. They became the enabling tools of molecular biology, genetics and biotechnology, and made analysis at the most fundamental levels routine. Hundreds of different REases have been discovered and are available commercially. Their genes have been cloned, sequenced and overexpressed. Most have been characterized to some extent, but few have been studied in depth. Here, we describe the original discoveries in this field, and the properties of the first Type II REases investigated. We discuss the mechanisms of sequence recognition and catalysis, and the varied oligomeric modes in which Type II REases act. We describe the surprising heterogeneity revealed by comparisons of their sequences and structures.

Solution parameters modulating DNA binding specificity of the restriction endonuclease EcoRV

The DNA binding stringency of restriction endonucleases is crucial for their proper function. The X-ray structures of the specific and non-cognate complexes of the restriction nuclease EcoRV are considerably different suggesting significant differences in the hydration and binding free energies. Nonetheless, the majority of studies performed at pH 7.5, optimal for enzymatic activity, have found a < 10-fold difference between EcoRV binding constants to the specific and nonspecific sequences in the absence of divalent ions. We used a recently developed self-cleavage assay to measure EcoRV-DNA competitive binding and to evaluate the influence of water activity, pH and salt concentration on the binding stringency of the enzyme in the absence of divalent ions. We find the enzyme can readily distinguish specific and nonspecific sequences. The relative specific-nonspecific binding constant increases strongly with increasing neutral solute concentration and with decreasing pH. The difference in number of associated waters between specific and nonspecific DNA-EcoRV complexes is consistent with the differences in the crystal structures. Despite the large pH dependence of the sequence specificity, the osmotic pressure dependence indicates little change in structure with pH. The large osmotic pressure dependence means that measurement of protein-DNA specificity in dilute solution cannot be directly applied to binding in the crowded environment of the cell. In addition to divalent ions, water activity and pH are key parameters that strongly modulate binding specificity of EcoRV.

Use of DNA length variation to detect periodicities in positively cooperative, nonspecific binding

The experiments described here demonstrate ways in which DNA length can be used as an experimental variable for the characterization of positively cooperative, sequence nonspecific DNA binding. Examples are drawn from recent studies of the interactions of O(6)-alkylguanine DNA alkyltransferase (AGT) with duplex DNAs (Melikishvili et al. (2008). Interactions of human O(6)-alkylguanine-DNA alkyltransferase (AGT) with short double-stranded DNAs. Biochemistry 47, 13754-13763). Oscillations in binding density and apparent binding site size (S(app)) are predicted by models in which a single cooperative assembly forms on each DNA molecule and in which enzyme molecules bind full-length binding sites, but not partial ones. These oscillations provide an accurate, DNA-length independent measure of the occluded binding site size (the length of DNA that one protein molecule occupies to the exclusion of others). In addition, length-dependent oscillations in association constant (K) and cooperativity (ω) reveal the degree to which substrate length can influence these parameters.

Differences between Ca2+ and Mg2+ in DNA binding and release by the SfiI restriction endonuclease: implications for DNA looping

Many enzymes acting on DNA require Mg(2+) ions not only for catalysis but also to bind DNA. Binding studies often employ Ca(2+) as a substitute for Mg(2+), to promote DNA binding whilst disallowing catalysis. The SfiI endonuclease requires divalent metal ions to bind DNA but, in contrast to many systems where Ca(2+) mimics Mg(2+), Ca(2+) causes SfiI to bind DNA almost irreversibly. Equilibrium binding by wild-type SfiI cannot be conducted with Mg(2+) present as the DNA is cleaved so, to study the effect of Mg(2+) on DNA binding, two catalytically-inactive mutants were constructed. The mutants bound DNA in the presence of either Ca(2+) or Mg(2+) but, unlike wild-type SfiI with Ca(2+), the binding was reversible. With both mutants, dissociation was slow with Ca(2+) but was in one case much faster with Mg(2+). Hence, Ca(2+) can affect DNA binding differently from Mg(2+). Moreover, SfiI is an archetypal system for DNA looping; on DNA with two recognition sites, it binds to both sites and loops out the intervening DNA. While the dynamics of looping cannot be measured with wild-type SfiI and Ca(2+), it becomes accessible with the mutant and Mg(2+).

Assessment of the optimization of affinity and specificity at protein-DNA interfaces

The biological functions of DNA-binding proteins often require that they interact with their targets with high affinity and/or high specificity. Here, we describe a computational method that estimates the extent of optimization for affinity and specificity of amino acids at a protein-DNA interface based on the crystal structure of the complex, by modeling the changes in binding-free energy associated with all individual amino acid and base substitutions at the interface. The extent to which residues are predicted to be optimal for specificity versus affinity varies within a given protein-DNA interface and between different complexes, and in many cases recapitulates previous experimental observations. The approach provides a complement to traditional methods of mutational analysis, and should be useful for rapidly formulating hypotheses about the roles of amino acid residues in protein-DNA interfaces.

DNA distortion and specificity in a sequence-specific endonuclease

Five new structures of the Q138F HincII enzyme bound to a total of three different DNA sequences and three different metal ions (Ca(2+), Mg(2+), and Mn(2+)) are presented. While previous structures were produced from soaking Ca(2+) into preformed Q138F HincII/DNA crystals, the new structures are derived from cocrystallization with Ca(2+), Mg(2+), or Mn(2+). The Mn(2)(+)-bound structure provides the first view of a product complex of Q138F HincII with cleaved DNA. Binding studies and a crystal structure show how Ca(2+) allows trapping of a Q138F HincII complex with noncognate DNA in a catalytically incompetent conformation. Many Q138F HincII/DNA structures show asymmetry, despite the binding of a symmetric substrate by a symmetric enzyme. The various complexes are fit into a model describing the different conformations of the DNA-bound enzyme and show how DNA conformational energetics determine DNA-cleavage rates by the Q138F HincII enzyme.

Sliding and jumping of single EcoRV restriction enzymes on non-cognate DNA

The restriction endonuclease EcoRV can rapidly locate a short recognition site within long non-cognate DNA using 'facilitated diffusion'. This process has long been attributed to a sliding mechanism, in which the enzyme first binds to the DNA via nonspecific interaction and then moves along the DNA by 1D diffusion. Recent studies, however, provided evidence that 3D translocations (hopping/jumping) also help EcoRV to locate its target site. Here we report the first direct observation of sliding and jumping of individual EcoRV molecules along nonspecific DNA. Using fluorescence microscopy, we could distinguish between a slow 1D diffusion of the enzyme and a fast translocation mechanism that was demonstrated to stem from 3D jumps. Salt effects on both sliding and jumping were investigated, and we developed numerical simulations to account for both the jump frequency and the jump length distribution. We deduced from our study the 1D diffusion coefficient of EcoRV, and we estimated the number of jumps occurring during an interaction event with nonspecific DNA. Our results substantiate that sliding alternates with hopping/jumping during the facilitated diffusion of EcoRV and, furthermore, set up a framework for the investigation of target site location by other DNA-binding proteins.

Use of plasmon coupling to reveal the dynamics of DNA bending and cleavage by single EcoRV restriction enzymes

Pairs of Au nanoparticles have recently been proposed as "plasmon rulers" based on the dependence of their light scattering on the interparticle distance. Preliminary work has suggested that plasmon rulers can be used to measure and monitor dynamic distance changes over the 1- to 100-nm length scale in biology. Here, we substantiate that plasmon rulers can be used to measure dynamical biophysical processes by applying the ruler to a system that has been investigated extensively by using ensemble kinetic measurements: the cleavage of DNA by the restriction enzyme EcoRV. Temporal resolutions of up to 240 Hz were obtained, and the end-to-end extension of up to 1,000 individual dsDNA enzyme substrates could be simultaneously monitored for hours. The kinetic parameters extracted from our single-molecule cleavage trajectories agree well with values obtained in bulk through other methods and confirm well known features of the cleavage process, such as DNA bending before cleavage. Previously unreported dynamical information is revealed as well, for instance, the degree of softening of the DNA just before cleavage. The unlimited lifetime, high temporal resolution, and high signal/noise ratio make the plasmon ruler a unique tool for studying macromolecular assemblies and conformational changes at the single-molecule level.

Kinetic analyses of divalent cation-dependent EcoRV digestions on a DNA-immobilized quartz crystal microbalance

Enzymatic digestion with a type IIP restriction endonuclease EcoRV was investigated on a DNA-immobilized 27-MHz quartz crystal microbalance (QCM). Real-time observations of both the enzyme binding process and the DNA cleavage process of EcoRV were followed by frequency (mass) changes on the QCM, which were dependent on divalent cations such as Ca(2+) or Mg(2+). In the presence of Ca(2+), the site-specific binding of EcoRV to DNA could be observed, without the catalytic process. On the other hand, in the presence of Mg(2+), both the binding of the enzyme to the specific DNA (mass increase) and the site-specific cleavage reaction (mass decrease) could be observed continuously from QCM frequency changes. From time courses of frequency (mass) changes, each kinetic parameter, namely binding rate constants (k(on)), dissociation rate constants (k(off)), dissociation constants (K(d)) of EcoRV to DNA, and catalytic rate constant (k(cat)) of the cleavage reaction, could be determined. The binding kinetic parameters of EcoRV in the presence of Ca(2+) were consistent with those of the binding process followed by the cleavage process in the presence of Mg(2+). The k(cat) value obtained by the QCM method was also consistent with that obtained by other methods. This study is the first to simultaneously determine k(on), k(off), and k(cat) for a type IIP restriction endonuclease on one device.

Strong physical constraints on sequence-specific target location by proteins on DNA molecules

Sequence-specific binding to DNA in the presence of competing non-sequence-specific ligands is a problem faced by proteins in all organisms. It is akin to the problem of parking a truck at a loading bay by the side of a road in the presence of cars parked at random along the road. Cars even partially covering the loading bay prevent correct parking of the truck. Similarly on DNA, non-specific ligands interfere with the binding and function of sequence-specific proteins. We derive a formula for the probability that the loading bay is free from parked cars. The probability depends on the size of the loading bay and allows an estimation of the size of the footprint on the DNA of the sequence-specific protein by assaying protein binding or function in the presence of increasing concentrations of non-specific ligand. Assaying for function gives an 'activity footprint'; the minimum length of DNA required for function rather than the more commonly measured physical footprint. Assaying the complex type I restriction enzyme, EcoKI, gives an activity footprint of approximately 66 bp for ATP hydrolysis and 300 bp for the DNA cleavage function which is intimately linked with translocation of DNA by EcoKI. Furthermore, considering the coverage of chromosomal DNA by proteins in vivo, our theory shows that the search for a specific DNA sequence is very difficult; most sites are obscured by parked cars. This effectively rules out any significant role in target location for mechanisms invoking one-dimensional, linear diffusion along DNA.

Alteration of sequence specificity of the type II restriction endonuclease HincII through an indirect readout mechanism

The functional and structural consequences of a mutation of the DNA intercalating residue of HincII, Q138F, are presented. Modeling has suggested that the DNA intercalation by Gln-138 results in DNA distortions potentially used by HincII in indirect readout of its cognate DNA, GTYRAC (Y = C or T, R = A or G) (Horton, N. C., Dorner, L. F., and Perona, J. J. (2002) Nat. Struct. Biol. 9, 42-47). Kinetic data presented here indicate that the mutation of glutamine 138 to phenylalanine (Q138F) results in a change in sequence specificity at the center two base pairs of the cognate recognition site. We show that the preference of HincII for cutting, but not binding, the three cognate sites differing in the center two base pairs has been altered by the mutation Q138F. Five new crystal structures are presented including Q138F HincII bound to GTTAAC and GTCGAC both with and without Ca2+ as well as the structure of wild type HincII bound to GTTAAC. The Q138F HincII/DNA structures show conformational changes in the protein, bound DNA, and at the protein-DNA interface, consistent with the formation of adaptive complexes. Analysis of these structures and the effect of Ca2+ binding on the protein-DNA interface illuminates the origin of the altered specificity by the mutation Q138F in the HincII enzyme.

Real-time observation of DNA looping dynamics of Type IIE restriction enzymes NaeI and NarI

Many restriction enzymes require binding of two copies of a recognition sequence for DNA cleavage, thereby introducing a loop in the DNA. We investigated looping dynamics of Type IIE restriction enzymes NaeI and NarI by tracking the Brownian motion of single tethered DNA molecules. DNA containing two endonuclease recognition sites spaced a few 100 bp apart connect small polystyrene beads to a glass surface. The position of a bead is tracked through video microscopy. Protein-mediated looping and unlooping is then observed as a sudden specific change in Brownian motion of the bead. With this method we are able to directly follow DNA looping kinetics of single protein–DNA complexes to obtain loop stability and loop formation times. We show that, in the absence of divalent cations, NaeI induces DNA loops of specific size. In contrast, under these conditions NarI mainly creates non-specific loops, resulting in effective DNA compaction for higher enzyme concentrations. Addition of Ca²⁺ increases the NaeI-DNA loop lifetime by two orders of magnitude and stimulates specific binding by NarI. Finally, for both enzymes we observe exponentially distributed loop formation times, indicating that looping is dominated by (re)binding the second recognition site.

Measurement of the contributions of 1D and 3D pathways to the translocation of a protein along DNA

Proteins that act at specific DNA sequences bind DNA randomly and then translocate to the target site. The translocation is often ascribed to the protein sliding along the DNA while maintaining continuous contact with it. Proteins also can move on DNA by multiple cycles of dissociation/reassociation within the same chain. To distinguish these pathways, a strategy was developed to analyze protein motion between DNA sites. The strategy reveals whether the protein maintains contact with the DNA as it transfers from one site to another by sliding or whether it loses contact by a dissociation/reassociation step. In reactions at low salt, the test protein stayed on the DNA as it traveled between sites, but only when the sites were <50 bp apart. Transfers of >30 bp at in vivo salt, and over distances of >50 bp at any salt, always included at least one dissociation step. Hence, for this enzyme, 1D sliding operates only over short distances at low salt, and 3D dissociation/reassociation is its main mode of translocation.

Trapping DNA-protein binding reactions with neutral osmolytes for the analysis by gel mobility shift and self-cleavage assays

We take advantage of our previous observation that neutral osmolytes can strongly slow down the rate of DNA–protein complex dissociation to develop a method that uses osmotic stress to ‘freeze’ mixtures of DNA–protein complexes and prevent further reaction enabling analysis of the products. We apply this approach to the gel mobility shift assay and use it to modify a self-cleavage assay that uses the nuclease activity of the restriction endonucleases to measure sensitively their specific binding to DNA. At sufficiently high concentrations of neutral osmolytes the cleavage reaction can be triggered at only those DNA fragments with initially bound enzyme. The self-cleavage assay allows measurement of binding equilibrium and kinetics directly in solution avoiding the intrinsic problems of gel mobility shift and filter binding assays while providing the same sensitivity level. Here we compare the self-cleavage and gel mobility shift assays applied to the DNA binding of EcoRI and BamHI restriction endonucleases. Initial results indicate that BamHI dissociation from its specific DNA sequence is strongly linked to water activity with the half-life time of the specific complex increasing ∼20-fold from 0 to 1 osmolal betaine.

Analysis of chromosomal insertion sites for Bacteroides Tn4555 and the role of TnpA

Tn4555, a mobilizable transposon carrying cefoxitin resistance, is directed to a preferred target site in the Bacteroides fragilis chromosome by a transposon-encoded targeting protein TnpA. In an effort to characterize target site selection for Tn4555, the existence of preferred target sites in other species of Bacteroides and in Escherichia coli was examined. For these analyses a Tn4555 mini element, pFD660, was transferred from E. coli donors to Bacteroides thetaiotaomicron or Bacteroides ovatus recipients and the resulting sites of insertion analyzed. A similar construct, pFD794 was used to determine insertion sites in E. coli, and preferred sites were found in all bacteria tested. Also the ability of TnpA to bind to various targets was examined in mobility shift assays. Although TnpA bound to all tested sequences, it displayed higher affinity for the target sites. The binding characteristics of TnpA and the lack of significant base sequence homology between targets suggested that secondary structure of the sites was important for TnpA binding. Circular permutation tests supported the idea that TnpA targets bent DNA.

DNA-tension dependence of restriction enzyme activity reveals mechanochemical properties of the reaction pathway

Type II restriction endonucleases protect bacteria against phage infections by cleaving recognition sites on foreign double-stranded DNA (dsDNA) with extraordinary specificity. This capability arises primarily from large conformational changes in enzyme and/or DNA upon target sequence recognition. In order to elucidate the connection between the mechanics and the chemistry of DNA recognition and cleavage, we used a single-molecule approach to measure rate changes in the reaction pathway of EcoRV and BamHI as a function of DNA tension. We show that the induced-fit rate of EcoRV is strongly reduced by such tension. In contrast, BamHI is found to be insensitive, providing evidence that both substrate binding and hydrolysis are not influenced by this force. Based on these results, we propose a mechanochemical model of induced-fit reactions on DNA, allowing determination of induced-fit rates and DNA bend angles. Finally, for both enzymes a strongly decreased association rate is obtained on stretched DNA, presumably due to the absence of intradomain dissociation/re-association between non-specific sites (jumping). The obtained results should apply to many other DNA-associated proteins.

Mechanistic insights from the structures of HincII bound to cognate DNA cleaved from addition of Mg2+ and Mn2+

The three-dimensional X-ray crystal structures of HincII bound to cognate DNA containing GTCGAC and Mn(2+) or Mg(2+), at 2.50A and 2.95A resolution, respectively, are presented. In both structures, the DNA is found cleaved, and the positions of the active-site groups, cleaved phosphate group, and 3' oxygen atom of the leaving group are in very similar positions. Two highly occupied Mn(2+) positions are found in each active site of the four crystallographically independent subunit copies in the HincII/DNA/Mn(2+) structure. The manganese ion closest to the previously identified single Ca(2+) position of HincII is shifted 1.7A and has lost direct ligation to the active-site aspartate residue, Asp127. A Mn(2+)-ligated water molecule in a position analogous to that seen in the HincII/DNA/Ca(2+) structure, and proposed to be the attacking nucleophile, is beyond hydrogen bonding distance from the active-site lysine residue, Lys129, but remains within hydrogen bonding distance from the proRp oxygen atom of the phosphate group 3' to the scissile phosphate group. In addition, the position of the cleaved phosphate group is on the opposite side of the axis connecting the two metal ions relative to that found in the BamHI/product DNA/Mn(2+) structure. Mechanistic implications are discussed, and a model for the two-metal-ion mechanism of DNA cleavage by HincII is proposed.

A model for the mediation of processivity of DNA-targeting proteins by nonspecific binding: dependence on DNA length and presence of obstacles

A physical and mathematical model is presented to explain processivity of proteins on DNA. In this model, a DNA-targeting protein such as a restriction enzyme can diffuse to the DNA surface and nonspecifically bind to it. Once on the DNA surface it will either move along the DNA or equilibrate with the surrounding region. Owing to the nonspecific binding, the search for a specific site on the DNA occurs in a reduced dimensionality, and the protein appears processive when moving from one specific site to another. The simplest version of this nonspecific-binding-facilitated diffusion model is solved and the results quantitatively explain experimentally observed dependence of the processivity ratio on the intervening DNA length between two specific sites.

Ca(2+)-mediated site-specific DNA cleavage and suppression of promiscuous activity of KpnI restriction endonuclease

The characteristic feature of type II restriction endonucleases (REases) is their exquisite sequence specificity and obligate Mg(2+) requirement for catalysis. Efficient cleavage of DNA only in the presence of Ca(2+) ions, comparable with that of Mg(2+), is previously not described. Most intriguingly, KpnI REase exhibits Ca(2+)-dependent specific DNA cleavage. Moreover, the enzyme is highly promiscuous in its cleavage pattern on plasmid DNAs in the presence of Mn(2+) or Mg(2+), with the complete suppression of promiscuous activity in the presence of Ca(2+). KpnI methyltransferase does not exhibit promiscuous activity unlike its cognate REase. The REase binds to oligonucleotides containing canonical and mapped noncanonical sites with comparable affinities. However, the extent of cleavage is varied depending on the metal ion and the sequence. The ability of the enzyme to be promiscuous or specific may reflect an evolutionary design. Based on the results, we suggest that the enzyme KpnI represents an REase evolving to attain higher sequence specificity from an ancient nonspecific nuclease.

Repair of oxidized bases in DNA bubble structures by human DNA glycosylases NEIL1 and NEIL2

Repair of oxidatively damaged bases in the genome via the base excision repair pathway is initiated with excision of these lesions by DNA glycosylases with broad substrate range. The newly discovered human DNA glycosylases, NEIL1 and NEIL2, are distinct in structural features and reaction mechanism from the previously characterized NTH1 and OGG1 but act on many of the same substrates. However, NEIL2 shows a unique preference for excising lesions from a DNA bubble, whereas NTH1 and OGG1 are only active with duplex DNA. NEIL1 also excises efficiently 5-hydroxyuracil, an oxidation product of cytosine, from the bubble and single-stranded DNA but does not have strong activity toward 8-oxoguanine in the bubble. The dichotomy in the activity of NEILs versus NTH1/OGG1 for bubble versus duplex DNA substrates is consistent with higher affinity of the NEILs for the bubble structures of both damaged and undamaged DNA relative to duplex structure. These observations suggest that the NEILs are functionally distinct from OGG1/NTH1 in vivo. OGG1/NTH1-independent repair of oxidized bases in the transcribed sequences supports the possibility that NEILs are preferentially involved in repair of lesions in DNA bubbles generated during transcription and/or replication.

DNA recognition by the EcoRV restriction endonuclease probed using base analogues

The EcoRV restriction endonuclease recognises palindromic GATATC sequences and cuts between the central T and dA bases in a reaction that has an absolute requirement for a divalent metal ion, physiologically Mg(2+). Use has been made of base analogues, which delete hydrogen bonds between the protein and DNA (or hydrophobic interactions in the case of the 5-CH(3) group of thymine), to evaluate the roles of the outer two base-pairs (GATATC) in DNA recognition. Selectivity arises at both the binding steps leading to the formation of the enzyme-DNA-metal ion ternary complex (assayed by measuring the dissociation constant in the presence of the non-reactive metal Ca(2+)) and the catalytic step (evaluated using single-turnover hydrolysis in the presence of Mg(2+)), with each protein-DNA contact contributing to recognition. With the A:T base-pair, binding was reduced by the amount expected for the simple loss of a single contact; much more severe effects were observed with the G:C base-pair, suggesting additional conformational perturbation. Most of the modified bases lowered the rate of hydrolysis; furthermore, the presence of an analogue in one strand of the duplex diminished cutting at the second, unmodified strand, indicative of communication between DNA binding and the active site. The essential metal ion Mg(2+) plays a key role in mediating interactions between the DNA binding site and active centre and in many instances rescue of hydrolysis was seen with Mn(2+). It is suggested that contacts between the GATATC site are required for tight binding and for the correct assembly of metal ions and bound water at the catalytic site, functions important in providing acid/base catalysis and transition state stabilisation.

Protein motion from non-specific to specific DNA by three-dimensional routes aided by supercoiling

DNA-binding proteins are generally thought to locate their target sites by first associating with the DNA at random and then translocating to the specific site by one-dimensional (1D) diffusion along the DNA. We report here that non-specific DNA conveys proteins to their target sites just as well when held near the target by catenation as when co-linear with the target. Hence, contrary to the prevalent view, proteins move from random to specific sites primarily by three-dimensional (3D) rather than 1D pathways, by multiple dissociation/re-association events within a single DNA molecule. We also uncover a role for DNA supercoiling in target-site location. Proteins find their sites more readily in supercoiled than in relaxed DNA, again indicating 3D rather than 1D routes.

The small subunit of M. AquI is responsible for sequence-specific DNA recognition and binding in the absence of the catalytic domain

AquI DNA methyltransferase (M. AquI) catalyzes the transfer of a methyl group from S-adenosyl-L-methionine to the C5 position of the outermost deoxycytidine base in the DNA sequence 5'-CCCGGG-3'. M. AquI is a heterodimer in which the polypeptide chain is separated at the junction between the two equivalent structural domains in the related enzyme M. HhaI. Recently, we reported the subcloning, overexpression, and purification of the subunits (alpha and beta) of M. AquI separately. Here we describe the DNA binding properties of M. AquI. The results presented here indicate that the beta subunit alone contains all of the information for sequence-specific DNA recognition and binding. The first step in the sequence-specific recognition of DNA by M. AquI involves the formation of binary complex with the target recognition domain in conjunction with conserved sequence motifs IX and X, found in all known C5 DNA methyltransferases, contained in the beta subunit. The alpha subunit enhances the binding of the beta subunit to DNA specifically and nonspecifically. It is likely that the addition of the alpha subunit to the beta subunit stabilizes the conformation of the beta subunit and thereby enhances its affinity for DNA indirectly. Addition of S-adenosyl-L-methionine and its analogues S-adenosyl-L-homocysteine and sinefungin enhances binding, but only in the presence of the alpha subunit. These compounds did not have any effect on DNA binding by the beta subunit alone. Using a 30-mer oligodeoxynucleotide substrate containing 5-fluorodeoxycytidine (5-FdC), it was found that the beta subunit alone did not form a covalent complex with its specific sequence in the absence or presence of S-adenosyl-L-methionine. However, the addition of the alpha subunit to the beta subunit led to the formation of a covalent complex with specific DNA sequence containing 5-FdC.

Type II restriction endonucleases

Type II restriction endonucleases have emerged as important paradigms for the study of protein-nucleic acid interactions. This is due to their ability to catalyse phosphodiester bond cleavage with very large rate enhancements while also maintaining exquisite sequence selectivities. The principles and methods developed to analyze site-specific binding and catalysis for restriction endonucleases can be applied to other enzymes which also operate on nucleic acids. This paper reviews biochemical and structural approaches to characterization of these enzymes, with particular attention to the multiple crucial roles of divalent metal ions, the possibilities for use of alternative substrates in binding and catalytic experiments, the strategies for exploring the detailed chemistry of phosphoryl transfer, and the use of X-ray crystallography to provide descriptions of conformational pathways at specific, nonspecific, and noncognate DNA sites.

Structure and function of type II restriction endonucleases

More than 3000 type II restriction endonucleases have been discovered. They recognize short, usually palindromic, sequences of 4-8 bp and, in the presence of Mg(2+), cleave the DNA within or in close proximity to the recognition sequence. The orthodox type II enzymes are homodimers which recognize palindromic sites. Depending on particular features subtypes are classified. All structures of restriction enzymes show a common structural core comprising four beta-strands and one alpha-helix. Furthermore, two families of enzymes can be distinguished which are structurally very similar (EcoRI-like enzymes and EcoRV-like enzymes). Like other DNA binding proteins, restriction enzymes are capable of non-specific DNA binding, which is the prerequisite for efficient target site location by facilitated diffusion. Non-specific binding usually does not involve interactions with the bases but only with the DNA backbone. In contrast, specific binding is characterized by an intimate interplay between direct (interaction with the bases) and indirect (interaction with the backbone) readout. Typically approximately 15-20 hydrogen bonds are formed between a dimeric restriction enzyme and the bases of the recognition sequence, in addition to numerous van der Waals contacts to the bases and hydrogen bonds to the backbone, which may also be water mediated. The recognition process triggers large conformational changes of the enzyme and the DNA, which lead to the activation of the catalytic centers. In many restriction enzymes the catalytic centers, one in each subunit, are represented by the PD. D/EXK motif, in which the two carboxylates are responsible for Mg(2+) binding, the essential cofactor for the great majority of enzymes. The precise mechanism of cleavage has not yet been established for any enzyme, the main uncertainty concerns the number of Mg(2+) ions directly involved in cleavage. Cleavage in the two strands usually occurs in a concerted fashion and leads to inversion of configuration at the phosphorus. The products of the reaction are DNA fragments with a 3'-OH and a 5'-phosphate.

Analysis of DNA looping interactions by type II restriction enzymes that require two copies of their recognition sites

Before cleaving DNA substrates with two recognition sites, the Cfr10I, NgoMIV, NaeI and SfiI restriction endonucleases bridge the two sites through 3D space, looping out the intervening DNA. To characterise their looping interactions, the enzymes were added to plasmids with two recognition sites interspersed with two res sites for site-specific recombination by Tn21 resolvase, in buffers that contained either EDTA or CaCl2 so as to preclude DNA cleavage by the endonuclease; the extent to which the res sites were sequestered into separate loops was evaluated from the degree of inhibition of resolvase. With Cfr10I, a looped complex was detected in the presence but not in the absence of Ca(2+); it had a lifetime of about 90 seconds. Neither NgoMIV nor NaeI gave looped complexes of sufficient stability to be detected by this method. In contrast, SfiI with Ca(2+) produced a looped complex that survived for more than seven hours, whereas its looping interaction in EDTA lasts for about four minutes. When resolvase was added to a SfiI binding reaction in EDTA followed immediately by CaCl2, the looped DNA was blocked from recombination while the unlooped DNA underwent recombination. By measuring the distribution between looped and unlooped DNA at various SfiI concentrations, and by fitting the data to a model for DNA binding by a tetrameric protein to two sites in cis, an equilibrium constant for the looping interaction was determined. The equilibrium constant was essentially independent of the length of DNA between the SfiI sites.

Mutational analysis of two putative catalytic motifs of the type IV restriction endonuclease Eco57I

The role of two sequence motifs (SM) as putative cleavage catalytic centers (77)PDX(13)EAK (SM I) and (811)PDX(20)DQK (SM II) of type IV restriction endonuclease Eco57I was studied by site-directed mutational analysis. Substitutions within SM I; D78N, D78A, D78K, and E92Q reduced cleavage activity of Eco57I to a level undetectable both in vivo and in vitro. Residual endonucleolytic activity of the E92Q mutant was detected only when the Mg(2+) in the standard reaction mixture was replaced with Mn(2+). The mutants D78N and E92Q retained the ability to interact with DNA specifically. The mutants also retained DNA methylation activity of Eco57I. The properties of the SM I mutants indicate that Asp(78) and Glu(92) residues are essential for cleavage activity of the Eco57I, suggesting that the sequence motif (77)PDX(13)EAK represents the cleavage active site of this endonuclease. Eco57I mutants containing single amino acid substitutions within SM II (D812A, D833N, D833A) revealed only a small or moderate decrease of cleavage activity as compared with wild-type Eco57I, indicating that the SM II motif does not represent the catalytic center of Eco57I. The results, taken together, allow us to conclude that the Eco57I restriction endonuclease has one catalytic center for cleavage of DNA.

The energetics of the interaction of BamHI endonuclease with its recognition site GGATCC

The interaction of BamHI endonuclease with DNA has been studied crystallographically, but has not been characterized rigorously in solution. The enzyme binds in solution as a homodimer to its recognition site GGATCC. Only six base-pairs are directly recognized, but binding affinity (in the absence of the catalytic cofactor Mg(2+)) increases 5400-fold as oligonucleotide length increases from 10 to 14 bp. Binding is modulated by sequence context outside the recognition site, varying about 30-fold from the bes t (GTG or TAT) to the worst (CGG) flanking triplets. BamHI, EcoRI and EcoRV endonucleases all have different context preferences, suggesting that context affects binding by influencing the free energy levels of the complexes rather than that of the free DNA. Ethylation interference footprinting in the absence of divalent metal shows a localized and symmetrical pattern of phosphate contacts, with strong contacts at NpNpNpGGApTCC. In the presence of Mg(2+), first-order cleavage rate constants are identical in the two GGA half-sites, are the same for the two nicked intermediates and are unaffected by substrate length in the range 10-24 bp. DNA binding is strongly enhanced by mutations D94N, E111A or E113K, by binding of Ca(2+) at the active site, or by deletion of the scissile phosphate GpGATCC, indicating that a cluster of negative charges at the catalytic site contributes at least 3-4 kcal/mol of unfavorable binding free energy. This electrostatic repulsion destabilizes the enzyme-DNA complex and favors metal ion binding and progression to the transition state for cleavage.

One- and three-dimensional pathways for proteins to reach specific DNA sites

Proteins that interact with specific DNA sites bind to DNA at random and then translocate to the target site. This may occur by one-dimensional diffusion along the DNA, or through three-dimensional space via multiple dissociation/re-associations. To distinguish these routes, reactions of the ECO:RV endonuclease were studied on substrates with two ECO:RV sites separated by varied distances. The fraction of encounters between the DNA and the protein that resulted in the processive cleavage of both sites decreased as the length of intervening DNA was increased, but not in the manner demanded for one-dimensional diffusion. The variation in processivity with inter-site spacing shows instead that protein moves from one site to another through three-dimensional space, by successive dissociation/re-associations, though each re-association to a new site is followed by a search of the DNA immediately adjacent to that site. Although DNA-binding proteins are usually thought to find their target sites by one-dimensional pathways, three-dimensional routes may be more common than previously anticipated.

Sequence of the 5'-flanking region and promoter activity of the human mucin gene MUC5B in different phenotypes of colon cancer cells

Control of gene expression in intestinal cells is poorly understood. Molecular mechanisms that regulate transcription of cellular genes are the foundation for understanding developmental and differentiation events. Mucin gene expression has been shown to be altered in many intestinal diseases and especially cancers of the gastrointestinal tract. Towards understanding the transcriptional regulation of a member of the 11p15.5 human mucin gene cluster, we have characterized 3.55 kb of the 5'-flanking region of the human mucin gene MUC5B, including the promoter, the first two exons and the first intron. We report here the promoter activity of successively 5'-truncated sections of 956 bases of this region by fusing it to the coding region of a luciferase reporter gene. The transcription start site was determined by primer-extension analysis. The region upstream of the transcription start site is characterized by the presence of a TATA box at bases -32/-26, DNA-binding elements for transcription factors c-Myc, N-Myc, Sp1 and nuclear factor kappaB as well as putative activator protein (AP)-1-, cAMP-response-element-binding protein (CREB)-, hepatocyte nuclear factor (HNF)-1-, HNF-3-, TGT3-, gut-enriched Krüppel factor (GKLF)-, thyroid transcription factor (TTF)-1- and glucocorticoid receptor element (GRE)-binding sites. Intron 1 of MUC5B was also characterized, it is 2511 nucleotides long and contains a DNA segment of 259 bp in which are clustered eight tandemly repeated GA boxes and a CACCC box that bind Sp1. AP-2alpha and GATA-1 nuclear factors were also shown to bind to their respective cognate elements in intron 1. In transfection studies the MUC5B promoter showed a cell-specific activity as it is very active in mucus-secreting LS174T cells, whereas it is inactive in Caco-2 enterocytes and HT-29 STD (standard) undifferentiated cells. Within the promoter, maximal transcription activity was found in a segment covering the first 223 bp upstream of the transcription start site. Finally, in co-transfection experiments a transactivating effect of Sp1 on to MUC5B promoter was seen in LS174T and Caco-2 cells.

Reactions of BglI and other type II restriction endonucleases with discontinuous recognition sites

Type II restriction enzymes generally recognize continuous sequences of 4-8 consecutive base pairs on DNA, but some recognize discontinuous sites where the specified sequence is interrupted by a defined length of nonspecific DNA. To date, a mechanism has been established for only one type II endonuclease with a discontinuous site, SfiI at GGCCNNNNNGGCC (where N is any base). In contrast to orthodox enzymes such as EcoRV, dimeric proteins that act at a single site, SfiI is a tetramer that interacts with two sites before cleaving DNA. BglI has a similar recognition sequence (GCCNNNNNGGC) to SfiI but a crystal structure like EcoRV. BglI and several other endonucleases with discontinuous sites were examined to see if they need two sites for their DNA cleavage reactions. The enzymes included some with sites containing lengthy segments of nonspecific DNA, such as XcmI (CCANNNNNNNNNTGG). In all cases, they acted at individual sites. Elongated recognition sites do not necessitate unusual reaction mechanisms. Other experiments on BglI showed that it bound to and cleaved DNA in the same manner as EcoRV, thus further delineating a distinct group of restriction enzymes with similar structures and a common reaction mechanism.

The Cfr10I restriction enzyme is functional as a tetramer

It is thought that most of the type II restriction endonucleases interact with DNA as homodimers. Cfr10I is a typical type II restriction enzyme that recognises the 5'-Pu decreases CCGGPy sequence and cleaves it as indicated by the arrow. Gel-filtration and analytical ultracentrifugation data presented here indicate that Cfr10I is a homotetramer in isolation. The only SfiI restriction enzyme that recognises the long interrupted recognition sequence 5'-GGCCNNNNNGGCC has been previously reported to operate as a tetramer however, its structure is unknown. Analysis of Cfr10I crystals revealed that a single molecule in the asymmetric unit is repeated by D2 symmetry to form a tetramer. To determine whether the packing of the Cfr10I in the crystal reflects the quaternary structure of the protein in solution, the tryptophan W220 residue located at the putative dimer-dimer interface was mutated to alanine, and the structural and functional consequences of the substitution were analysed. Equilibrium sedimentation experiments revealed that, in contrast to the wild-type Cfr10I, the W220A mutant exists in solution predominantly as a dimer. In addition, the tetramer seems to be a catalytically important form of Cfr10I, since the DNA cleavage activity of the W220A mutant is < 0.1% of that of the wild-type enzyme. Further, analysis of plasmid DNA cleavage suggests that the Cfr10I tetramer is able to interact with two copies of the recognition sequence, located on the same DNA molecule. Indeed, electron microscopy studies demonstrated that two distant recognition sites are brought together through the DNA looping induced by the simultaneous binding of the Cfr10I tetramer to both sites. These data are consistent with the tetramer being a functionally important form of Cfr10I.

Structural analysis of a mutational hot-spot in the EcoRV restriction endonuclease: a catalytic role for a main chain carbonyl group

Following random mutagenesis of the Eco RV endonuclease, a high proportion of the null mutants carry substitutions at Gln69. Such mutants display reduced rates for the DNA cleavage step in the reaction pathway, yet the crystal structures of wild-type Eco RV fail to explain why Gln69 is crucial for activity. In this study, crystal structures were determined for two mutants of Eco RV, with Leu or Glu at residue 69, bound to specific DNA. The structures of the mutants are similar to the native protein and no function can be ascribed to the side chain of the amino acid at this locus. Instead, the structures of the mutant proteins suggest that the catalytic defect is due to the positioning of the main chain carbonyl group. In the enzyme-substrate complex for Eco RV, the main chain carbonyl of Gln69 makes no interactions with catalytic functions but, in the enzyme-product complex, it coordinates a metal ion bound to the newly liberated 5'-phosphate. This re-positioning may be hindered in the mutant proteins. Molecular dynamics calculations indicate that the metal on the phosphoryl oxygen interacts with the carbonyl group upon forming the pentavalent intermediate during phosphodiester hydrolysis. A main chain carbonyl may thus play a role in catalysis by Eco RV.

Specificity from the synapsis of DNA elements by the Sfi I endonuclease

The synapsis of DNA sites is a prerequisite for the reactions of many proteins that act at specific DNA sequences. The requirement for synapsis was investigated by analysing the reactions of Sfi I, a tetrameric restriction enzyme that cleaves DNA only after interacting with two recognition sites. In the presence of Mg2+, oligonucleotide duplexes with the cognate recognition sequence were cleaved rapidly, with cooperative kinetics, while non-cognate duplexes were not cleaved. In the absence of Mg2+, the primary complex formed by Sfi I with cognate DNA contained two duplexes synapsed by the tetramer: a secondary complex containing one duplex was seen only at elevated Sfi I concentrations. In contrast, the principal complex with non-cognate DNA contained one duplex bound to Sfi I. Pairs of non-cognate duplexes, or one cognate and one non-cognate duplex, generally failed to form synaptic complexes. On adding Mg2+to complexes with cognate DNA, cleavage occurred much more rapidly in the synaptic complex than in the secondary complex. DNA synapsis thus acts to enhance the specificity of Sfi I for its recognition sequence, by demanding two cognate sites for a catalytically active complex and by excluding non-cognate sites from the synaptic complex.

Steric effects on multivalent ligand-receptor binding: exclusion of ligand sites by bound cell surface receptors

Steric effects can influence the binding of a cell surface receptor to a multivalent ligand. To account for steric effects arising from the size of a receptor and from the spacing of binding sites on a ligand, we extend a standard mathematical model for ligand-receptor interactions by introducing a steric hindrance factor. This factor gives the fraction of unbound ligand sites that are accessible to receptors, and thus available for binding, as a function of ligand site occupancy. We derive expressions for the steric hindrance factor for various cases in which the receptor covers a compact region on the ligand surface and the ligand expresses sites that are distributed regularly or randomly in one or two dimensions. These expressions are relevant for ligands such as linear polymers, proteins, and viruses. We also present numerical algorithms that can be used to calculate steric hindrance factors for other cases. These theoretical results allow us to quantify the effects of steric hindrance on ligand-receptor kinetics and equilibria.

DNA cleavage by the EcoRV restriction endonuclease: pH dependence and proton transfers in catalysis

To characterise the pH dependence of phosphodiester hydrolysis by the EcoRV endonuclease in the presence of Mn2+, single turnover reactions on a 12 bp DNA substrate were examined by stopped-flow and quench-flow methods between pH 6.0 and 8.5. At each pH value, the apparent rate constants for phosphodiester hydrolysis increased hyperbolically with the concentration of MnCl2, thus allowing values to be determined for the intrinsic rate constant at saturation with Mn2+ and the equilibrium dissociation constant for Mn2+. The equilibrium constants showed no systematic variation across the pH range tested, while the rate constants increased steeply with increasing pH up to an asymptote above pH 7.5. At low pH conditions, the gradient of a plot of log (rate constant) against pH approached a value of 2. DNA cleavage by EcoRV thus requires the de-protonation of two acidic groups. To determine whether aspartate 36 is one of the groups, mutants of EcoRV were made with other amino acid residues at position 36. Glutamate caused a partial loss of activity, while all other replacements gave near-zero activities. In contrast to wild-type EcoRV, the mutant with glutamate required the de-protonation of only one acidic group for DNA cleavage. A mechanism for EcoRV is proposed in which the water molecule that hydrolyses the phosphodiester bond is de-protonated by two Bronsted bases, probably the ionised forms of aspartate 36 and glutamate 45.

DNA cleavage by the EcoRV restriction endonuclease: roles of divalent metal ions in specificity and catalysis

The roles of divalent metal ions in DNA cleavage by the EcoRV endonuclease were studied by using Co2+ or Mn2+ as substitutes for the natural cofactor Mg2+. In steady-state experiments with a 12 bp oligonucleotide substrate, Co2+ yielded a similar turnover rate to that with Mg2+, but Mn2+ gave a slower rate. Single turnovers of EcoRV on this substrate were analysed by stopped-flow and quench-flow methods, to determine the rates for the formation of the ternary enzyme-DNA-metal complex, the hydrolysis of the phosphodiester bonds and the dissociation of the cleaved DNA. With Co2+, all three steps had similar rates to those with Mg2+. In contrast, Mn2+ gave a faster rate for phosphodiester hydrolysis than either Mg2+ or Co2+, but a slower rate for product dissociation, thus accounting for its low turnover rate. Single turnovers on plasmids also yielded faster rates for substrate hydrolysis with Mn2+ compared to Mg2+ and Co2+. Since Mn2+ gave the most rapid rates for the hydrolytic step, despite being less electronegative than Co2+, the function of the metal ion at the active site of EcoRV cannot be just the polarisation of the scissile phosphate. Moreover, the minimal scheme for the Co2+-catalysed reaction requires two metal ions for DNA cleavage. The metal ions seem to be involved in the precise positioning of both the substrate and the water that acts as the attacking nucleophile and in activating that water molecule. A model is presented to account for how two metal ions might fulfil these functions.

Buffer effects on EcoRV kinetics as measured by fluorescent staining and digital imaging of plasmid cleavage

We have developed a protocol to quantify polymer DNA cleavage which replaces the traditional radiolabeling and scintillation counting with fluorescent staining and digital imaging. This procedure offers high sensitivity, speed, and convenience, while avoiding waste and error associated with traditional 32P radiolabeling. This protocol was used to measure cleavage of pBR322 plasmid DNA by EcoRV, a type II restriction enzyme. EcoRV was found to exhibit an order of magnitude difference in binding in two apparently similar buffers used in previous investigations. To determine the origin of this effect, we measured reaction kinetics in buffers of different chemical nature and concentration: Tris, bis-Tris propane, Tes, Hepes, and cacodylate. We found that buffer concentration and identity had significant effects on EcoRV reaction velocity through large changes in specific binding and nonspecific binding (reflected in the Michaelis constant Km and the dissociation constant for nonspecific binding Kns). There were only small changes in Vmax. The source of the buffer effect is the protonated amines common to many pH buffers. These buffer cations likely act as counterions screening DNA phosphates, where both the protonated buffer structure and concentration affect enzyme binding strength. It appears that by choosing anionic buffers or zwitterionic buffers with a buried positive charge, buffer influence on the protein binding to DNA can be largely eliminated.

Isolation and characterization of a protein with high affinity for DNA: the glutamine synthetase of Thermus thermophilus 111

In a search of proteins from the thermophilic bacterium Thermus thermophilus 111 with a high affinity for DNA, the selected protein from this screening appears to be the glutamine synthetase (GS). The purified product gives one band in SDS-polyacrylamide gel electrophoresis (53,700 Da). The N-terminal 32 residues have been identified and present an homology of 80% with the glutamine synthetase of Bacillus subtilis and 76% with that of Thermotoga maritima. The protein displays the characteristic dodecameric structure of the eubacteria glutamine synthetase. From a detailed study of the interaction of this protein with DNA by dark-field electron microscopy and agarose gel electrophoresis, it is concluded that double-stranded DNA wraps the protein by a full turn of 150 bp length. An even number of GS molecules bound to a closed relaxed plasmid DNA does not alter its null topology. By using an inverted dimer DNA fragment, which contains twice a curved kinetoplast DNA insert in its central part, it is shown that DNA curvature rules the order in which GS binds to the DNA. DNA ends are also sites of high affinity for the GS. Supercoiling does not favor the binding of GS to the DNA with the exception of the apices that are by essence bent regions. By saturating a DNA molecule with GS one obtains a novel characteristic scalloped configuration in which the DNA undulates from one GS to the next. The DNA is condensed at least three times in these structures. By increasing the ratio of GS to DNA in solution the resulting material migrates as discrete bands relative to the free DNA in an agarose gel. By gel retardation and EM statistical distribution analysis of GS within the complexes, an average affinity constant of 10(7) M-1 was obtained. The potential implications of this novel interaction of the glutamine synthetase with DNA for the regulation of its own gene are briefly discussed.

Two intertwined methylation activities of the MmeI restriction-modification class-IIS system from Methylophilus methylotrophus

The class-IIS restriction endonuclease, R.MmeI, was isolated from Methylophilus methylotrophus. It was originally described as a monomeric enzyme, with the native Mr 105000+/-7000, which did not cleave DNA efficiently [Boyd et al. (1986) Nucleic Acids Res. 14, 5255-5274; Tucholski et al. (1995) Gene 157, 87-92]. However, it was discovered that R.MmeI endonucleolytic activity is enhanced by S-adenosyl-l-methionine (AdoMet) and sinefungin, an analogue of AdoMet. Surprisingly, the purified R.MmeI endonuclease was found to have a second enzymatic activity, namely methylation of the adenine residue to N6-methyladenine in the top strand of the MmeI-recognition sequence, 5'-TCCR*AC-3' (*A=meA. The R.MmeI methylating activity requires AdoMet and is increased in the presence of several divalent cations, 20-fold by Mg2+ or Ca2+, and less by Mn2+, Zn2+ and Co2+; however, methylation is inhibited entirely by sinefungin, at concentrations above 9microM. The latter observation shows that the enhancing effect of AdoMet or sinefungin on the DNA cleavage was not related to the process of DNA methylation. Furthermore, a second component of the MmeI restriction-modification system, a M.MmeI methyltransferase, was isolated and purified. The M.MmeI protein was found to have an Mr of 48000+/-2000 (under denaturing conditions) and to methylate both adenine residues (*A) in the MmeI-recognition sequence 5'-TCCR*AC-3'/3'-*AGGYTG-5'. Methylation of the top strand does not inhibit the DNA cleavage by R.MmeI, whereas methylation of both DNA strands blocks the cleavage process.