Molecular structure of the oxidized high-potential iron-sulfur protein isolated from Ectothiorhodospira vacuolata

Crystallographic characterization of the high-potential iron-sulfur protein in the oxidized state at 0.8 Å resolution

High-potential iron-sulfur protein (HiPIP) is a soluble electron carrier protein of photosynthetic bacteria with an Fe₄S₄ cluster. Although structural changes accompanying the electron transfer are important for understanding of the functional mechanism, the changes have not been clarified in sufficient detail. We previously reported the high-resolution crystal structures of HiPIP from a thermophilic purple bacterium Thermochromatium tepidum in the reduced state. In order to perform a detailed comparison between the structures in different redox states, the oxidized structure should also be revealed at high resolution. Therefore, in the present study we performed a crystallographic analysis of oxidized HiPIP and a structural comparison with the reduced form at a high resolution of 0.8 Å. The comparison highlighted small but significant contraction in the iron-sulfur cluster. The changes in Fe-S bond lengths were similar to that predicted by theoretical calculation, although some discrepancies were also found. Almost distances between the sulfur atoms of the iron-sulfur cluster and the protein environment are elongated upon the oxidation. Positional changes of hydrogen atoms in the protein environment, such as on the amide-hydrogen of Cys75 in the proximity of the iron-sulfur cluster, were also observed in the accurate analyses. None of the water molecules exhibited significant changes in position or anisotropy of atomic displacement parameter between the two states, while the orientations of some water molecules were different.

PqqE from Methylobacterium extorquens AM1: a radical S-adenosyl-l-methionine enzyme with an unusual tolerance to oxygen

Methylobacterium extorquens AM1 is an aerobic facultative methylotroph known to secrete pyrroloquinoline quinone (PQQ), a cofactor of a number of bacterial dehydrogenases, into the culture medium. To elucidate the molecular mechanism of PQQ biosynthesis, we are focusing on PqqE which is believed to be the enzyme catalysing the first reaction of the pathway. PqqE belongs to the radical S-adenosyl-l-methionine (SAM) superfamily, in which most, if not all, enzymes are very sensitive to dissolved oxygen and rapidly inactivated under aerobic conditions. We here report that PqqE from M. extorquens AM1 is markedly oxygen-tolerant; it was efficiently expressed in Escherichia coli cells grown aerobically and affinity-purified to near homogeneity. The purified and reconstituted PqqE contained multiple (likely three) iron-sulphur clusters and showed the reductive SAM cleavage activity that was ascribed to the consensus [4Fe-4S](2+) cluster bound at the N-terminus region. Mössbauer spectrometric analyses of the as-purified and reconstituted enzymes revealed the presence of [4Fe-4S](2+) and [2Fe-2S](2+) clusters as the major forms with the former being predominant in the reconstituted enzyme. PqqE from M.extorquens AM1 may serve as a convenient tool for studying the molecular mechanism of PQQ biosynthesis, avoiding the necessity of establishing strictly anaerobic conditions.

Identifying sequence determinants of reduction potentials of metalloproteins

The reduction potential of an electron transfer protein is one of its most important functional characteristics. Although the type of redox site and the protein fold are the major determinants of the reduction potential of a redox-active protein, its amino acid sequence may tune the reduction potential as well. Thus, homologous proteins can often be divided into different classes, with each class characterized by a biological function and a reduction potential. Site-specific mutagenesis of the sequence determinants of the differences in the reduction potential between classes should change the reduction potential of a protein in one class to that of the other class. Here, a procedure is presented that combines energetic and bioinformatic analysis of homologous proteins to identify sequence determinants that are also good candidates for site-specific mutations, using the [4Fe-4S] ferredoxins and the [4Fe-4S] high-potential iron-sulfur proteins as examples. This procedure is designed to guide site-specific mutations or more computationally expensive studies, such as molecular dynamics simulations. To make the procedure more accessible to the general scientific community, it is being implemented into CHARMMing, a Web-based portal, with a library of density functional theory results for the redox site that are used in the setting up of Poisson-Boltzmann continuum electrostatics calculations for the protein energetics.

Calculating standard reduction potentials of [4Fe-4S] proteins

The oxidation-reduction potentials of electron transfer proteins determine the driving forces for their electron transfer reactions. Although the type of redox site determines the intrinsic energy required to add or remove an electron, the electrostatic interaction energy between the redox site and its surrounding environment can greatly shift the redox potentials. Here, a method for calculating the reduction potential versus the standard hydrogen electrode, E°, of a metalloprotein using a combination of density functional theory and continuum electrostatics is presented. This work focuses on the methodology for the continuum electrostatics calculations, including various factors that may affect the accuracy. The calculations are demonstrated using crystal structures of six homologous HiPIPs, which give E° that are in excellent agreement with experimental results.

Characterizing the effects of the protein environment on the reduction potentials of metalloproteins

The reduction potentials of electron transfer proteins are critically determined by the degree of burial of the redox site within the protein and the degree of permanent polarization of the polypeptide around the redox site. Although continuum electrostatics calculations of protein structures can predict the net effect of these factors, quantifying each individual contribution is a difficult task. Here, the burial of the redox site is characterized by a dielectric radius R(p) (a Born-type radius for the protein), the polarization of the polypeptide is characterized by an electret potential ϕ(p) (the average electrostatic potential at the metal atoms), and an electret-dielectric spheres (EDS) model of the entire protein is then defined in terms of R(p) and ϕ(p). The EDS model shows that for a protein with a redox site of charge Q, the dielectric response free energy is a function of Q(2), while the electret energy is a function of Q. In addition, R(p) and ϕ(p) are shown to be characteristics of the fold of a protein and are predictive of the most likely redox couple for redox sites that undergo different redox couples.

Marked changes in electron transport through the blue copper protein azurin in the solid state upon deuteration

Measuring solid-state electron transport (ETp) across proteins allows studying electron transfer (ET) mechanism(s), while minimizing solvation effects on the process. ETp is, however, sensitive to any static (conformational) or dynamic (vibrational) changes in the protein. Our macroscopic measurements allow extending ETp studies to low temperatures, with the concomitant resolution of lower current densities, because of the larger electrode contact areas. Thus, earlier we reported temperature-independent ETp via the copper protein azurin (Az), from 80 K until denaturation, whereas for apo-Az ETp was temperature dependent above 180 K. Deuteration (H/D substitution) may provide mechanistic information on the question of whether the ETp involves H-bonds in the solid state. Here we report results of kinetic deuterium isotope effect (KIE) measurements on ETp through holo-Az as a function of temperature (30-340 K). Strikingly, deuteration changed ETp from temperature independent to temperature dependent above 180 K. This H/D effect is expressed in KIE values between 1.8 (340 K) and 9.1 (≤ 180 K). These values are remarkable in light of the previously reported inverse KIE on ET in Az in solution. We ascribe the difference between our KIE results and those observed in solution to the dominance of solvent effects in the latter (larger thermal expansion in H(2)O than in D(2)O), whereas in our case the KIE is primarily due to intramolecular changes, mainly in the low-frequency structural modes of the protein caused by H/D exchange. The observed high KIE values are consistent with a transport mechanism that involves through-H-bonds of the β-sheet structure of Az, likely also those in the Cu coordination sphere.

Temperature and force dependence of nanoscale electron transport via the Cu protein azurin

Solid-state electron transport (ETp) via a monolayer of immobilized azurin (Az) was examined by conducting probe atomic force microscopy (CP-AFM), as a function of both temperature (248-373K) and applied tip force (6-15 nN). At low forces, ETp via holo-Az (with Cu(2+)) is temperature-independent, but thermally activated via the Cu-depleted form of Az, apo-Az. While this observation agrees with those of macroscopic-scale measurements, we find that for holo-Az the mechanism of ETp at high temperatures changes upon an increase in the force applied by the tip to the proteins; namely, above 310 K and forces >6 nN ETp becomes thermally activated. This is in contrast to apo-Az, where increasing applied force causes only small monotonic increases in currents due to decreased electrode separation. The distinct ETp temperature dependence of holo- and apo-Az is assigned to a difference in structural response to pressure between the two protein forms. An important implication of these CP-AFM results (of measurements over a significant temperature range) is that for reliable ETp measurements on flexible macromolecules, such as proteins, the pressure applied during the measurements should be controlled or at least monitored.

X-ray crystallographic and computational studies of the O2-tolerant [NiFe]-hydrogenase 1 from Escherichia coli

The crystal structure of the membrane-bound O(2)-tolerant [NiFe]-hydrogenase 1 from Escherichia coli (EcHyd-1) has been solved in three different states: as-isolated, H(2)-reduced, and chemically oxidized. As very recently reported for similar enzymes from Ralstonia eutropha and Hydrogenovibrio marinus, two supernumerary Cys residues coordinate the proximal [FeS] cluster in EcHyd-1, which lacks one of the inorganic sulfide ligands. We find that the as-isolated, aerobically purified species contains a mixture of at least two conformations for one of the cluster iron ions and Glu76. In one of them, Glu76 and the iron occupy positions that are similar to those found in O(2)-sensitive [NiFe]-hydrogenases. In the other conformation, this iron binds, besides three sulfur ligands, the amide N from Cys20 and one Oε of Glu76. Our calculations show that oxidation of this unique iron generates the high-potential form of the proximal cluster. The structural rearrangement caused by oxidation is confirmed by our H(2)-reduced and oxidized EcHyd-1 structures. Thus, thanks to the peculiar coordination of the unique iron, the proximal cluster can contribute two successive electrons to secure complete reduction of O(2) to H(2)O at the active site. The two observed conformations of Glu76 are consistent with this residue playing the role of a base to deprotonate the amide moiety of Cys20 upon iron binding and transfer the resulting proton away, thus allowing the second oxidation to be electroneutral. The comparison of our structures also shows the existence of a dynamic chain of water molecules, resulting from O(2) reduction, located near the active site.

Fold versus sequence effects on the driving force for protein-mediated electron transfer

Electron transport chains composed of electron transfer reactions mainly between proteins provide fast efficient flow of energy in a variety of metabolic pathways. Reduction potentials are essential characteristics of the proteins because they determine the driving forces for the electron transfers. As both polar and charged groups from the backbone and side chains define the electrostatic environment, both the fold and the sequence will contribute. However, although the role of a specific sequence may be determined by experimental mutagenesis studies of reduction potentials, understanding the role of the fold by experiment is much more difficult. Here, continuum electrostatics and density functional theory calculations are used to analyze reduction potentials in [4Fe-4S] proteins. A key feature is that multiple homologous proteins in three different folds are compared: six high potential iron-sulfur proteins, four bacterial ferredoxins, and four nitrogenase iron proteins. Calculated absolute reduction potentials are shown to be in quantitative agreement with electrochemical reduction potentials. Calculations further demonstrate that the contribution of the backbone is larger than that of the side chains and is consistent for homologous proteins but differs for nonhomologous proteins, indicating that the fold is the major protein factor determining the reduction potential, whereas the specific amino acid sequence tunes the reduction potential for a given fold. Moreover, the fold contribution is determined mainly by the proximity of the redox site to the protein surface and the orientation of the dipoles of backbone near the redox site.

Expression, purification and characterization of a high potential iron-sulfur protein from Acidithiobacillus ferrooxidans

The high potential iron-sulfur protein (HiPIP) is involved in the iron respiratory electron transport chain of Acidithiobacillus ferrooxidans but its exact role is unclear. The gene of HiPIP from A. ferrooxidans ATCC 23270 was cloned and expressed in Escherichia coli, and the protein then purified by one-step affinity chromatography to homogeneity. The molecular mass of the HiPIP monomer was 7250.43 Da by MALDI-TOF MS, indicating the presence of the [Fe(4)S(4)] cluster. The optical and EPR spectra results of the recombinant protein confirmed that the iron-sulfur cluster was correctly inserted into the active site of the protein. Site-directed mutagenesis results revealed that Cys25, Cys28, Cys37 and Cys50 were involved in ligating to the iron-sulfur cluster.

Expression, purification and molecular modelling of the Iro protein from Acidithiobacillus ferrooxidans Fe-1

The Iro protein was proposed to be involved in the iron respiratory electron transport chain in Acidithiobacillus ferrooxidans, it is a member of HiPIP family with the iron-sulfur cluster for electron transfer. The gene of Iro protein from A. ferrooxidans Fe-1 was cloned and then successfully expressed in Escherichia coli, finally purified by one-step affinity chromatography to homogeneity. The recombinant protein was observed to be dimer. The molecular mass of a monomer containing the [Fe4S4] cluster was 6847.35 Da by MALDI-TOF-MS. The optical and EPR spectra results of the recombinant protein confirmed that the iron-sulfur cluster was correctly inserted into the active site of the protein. Molecular modelling for the protein revealed that Cys20, Cys23, Cys32 and Cys45 were in ligation with the iron-sulfur cluster, and Tyr10 was important for the stability of the [Fe4S4] cluster. As we know, this is the first report of expression in E. coli of the Iro protein from A. ferrooxidans Fe-1.

Structural analysis of the HiPIP from the acidophilic bacteria: Acidithiobacillus ferrooxidans

Hip is a high-potential iron-sulfur protein (HiPIP) isolated from the acidophilic bacterium, Acidithiobacillus ferrooxidans. In the present work, a structural model of Hip suggests that the role of proline residues is essential to stabilize the protein folding at very low pH. The presence of an unusual disulfide bridge in Hip is demonstrated using mass spectrometry and nuclear magnetic resonance. This disulfide bridge is necessary to anchor the N-terminal extremity of the protein, but is not involved in the acid stability of Hip. The structural parameters correlated with the pH dependence of Hip redox potential are also analysed on the basis of this model. Given that the same structural features can enhance acidic stability and lead to elevated redox potentials, modulation of the redox potentials of electron carriers may be necessary to achieve electron transfer at very low pH.

Structural and functional studies on the tetraheme cytochrome subunit and its electron donor proteins: the possible docking mechanisms during the electron transfer reaction

The photosynthetic reaction centers (RCs) classified as the group II possess a peripheral cytochrome (Cyt) subunit, which serves as the electron mediator to the special-pair. In the cycle of the photosynthetic electron transfer reactions, the Cyt subunit accepts electrons from soluble electron carrier proteins, and re-reduces the photo-oxidized special-pair of the bacteriochlorophyll. Physiologically, high-potential cytochromes such as the cytochrome c2 and the high-potential iron-sulfur protein (HiPIP) function as the electron donors to the Cyt subunit. Most of the Cyt subunits possess four heme c groups, and it was unclear which heme group first accepts the electron from the electron donor. The most distal heme to the special-pair, the heme-1, has a lower redox potential than the electron donors, which makes it difficult to understand the electron transfer mechanism mediated by the Cyt subunit. Extensive mutagenesis combined with kinetic studies has made a great contribution to our understanding of the molecular interaction mechanisms, and has demonstrated the importance of the region close to the heme-1 in the electron transfer. Moreover, crystallographic studies have elucidated two high-resolution three-dimensional structures for the RCs containing the Cyt subunit, the Blastochloris viridis and Thermochromatium tepidum RCs, as well as the structures of their electron donors. An examination of the structural data also suggested that the binding sites for both the cytochrome c2 and the HiPIP are located adjacent to the solvent-accessible edge of the heme-1. In addition, it is also indicated by the structural and biochemical data that the cytochrome c2 and the HiPIP dock with the Cyt subunit by c2 is recognized through electrostatic interactions while hydrophobic interactions are important in the HiPIP docking.

HiPIP in Rubrivivax gelatinosus is firmly associated to the membrane in a conformation efficient for electron transfer towards the photosynthetic reaction centre

High potential iron-sulfur protein (HiPIP), a small soluble redox protein, has been shown to serve in vivo as electron donor to the photosynthetic reaction centre (RC) in Rubrivivax gelatinosus [Biochemistry 34 (1995) 11736]. The results of time-resolved optical spectroscopy on membrane-fragments from this organism indicates that the photooxidized RC is re-reduced by HiPIP even in the absence of the soluble fraction. This implies that a significant fraction of HiPIP can firmly bind to the membrane in a conformation able to interact with the RCs. Salt treatment of the membrane-fragments abolishes these re-reduction kinetics, demonstrating the presence of HiPIP on the membrane due to association with the RC rather than due to simple trapping in hypothetical chromatophores. The existence of such a functional complex in membranes is confirmed and its structure further examined by electron paramagnetic resonance (EPR) performed on membrane-fragments. Orientation-dependent EPR spectra of HiPIP were recorded on partially ordered membranes, oxidized either chemically or photochemically. Whereas hardly any preferential orientation of the HiPIP was seen in the chemically oxidised sample, a subpopulation of HiPIP showing specific orientations could be photooxidised. This fraction arises from the electron transfer complex between HiPIP and the RC.

Ferredoxins of the third kind

Most low-potential ferredoxins (Fds) are of the well-known [2Fe-2S] plant or [4Fe-4S] bacterial type. Yet, an additional class of [2Fe-2S] Fds has been recognized on the basis of sequence and spectroscopic idiosyncrasies. A recent crystal structure has confirmed the uniqueness of this third kind of Fd, and shown that these proteins display an unexpected structural similarity to thioredoxin. The properties of these thioredoxin-like [2Fe-2S] Fds are summarized, and hypotheses concerning their function are discussed.

Amino acid sequences of two high-potential iron-sulfur proteins (HiPIPs) from the moderately halophilic purple phototrophic bacterium, Rhodospirillum salinarum

The amino acid sequences of two very different high-potential iron-sulfur protein (HiPIP) isozymes have been determined from the moderately halophilic purple phototrophic bacterium, Rhodospirillum salinarum. Iso-1 HiPIP, which is monomeric and contains 57 amino acid residues, is most similar to the Thiobacillus ferrooxidans iron-oxidizing enzyme (45% identity and a 6-residue deletion). On the other hand, iso-2 HiPIP, which is isolated as an oligomer, contains a peptide chain with 54 amino acid residues. It is the smallest reported to date and is only 31% identical to iso-1 HiPIP. A massive deletion of 17 residues is found at the N-terminus, such that only 2 residues remain prior to the first cysteine. Iso-2 HiPIP also has a 12-residue insertion and a 5-residue deletion. Prior to this study, there were only 2 absolutely conserved residues (Tyr 19 and Gly 75, Chromatium numbering) in addition to the 4 iron-sulfur cluster binding cysteine residues among the 13 HiPIPs sequenced to date. We found that Tyr 19 is absent in iso-2 HiPIP along with the entire N-terminal loop. Moreover, Gly 75 is substituted in both R. salinarum HiPIPs. These characteristics make the R. salinarum HiPIPs, and especially iso-2, the most divergent yet characterized.

Investigation of the role of a surface patch in the self-association of Chromatium vinosum high potential iron-sulfur protein

The role of a flattened, relatively hydrophobic surface patch in the self-association of Chromatium vinosum HiPIP was assessed by substituting phenylalanine 48 with lysine. The reduction potential of the F48K variant was 26 mV higher than that of the wild-type (WT) recombinant (rc) HiPIP, consistent with the introduction of a positive charge close to the cluster. Nuclear magnetic resonance spectroscopy (NMR) revealed that the electronic structure of the oxidized cluster in these two proteins is very similar at 295 K. In contrast, the electron transfer self-exchange rate constant of F48K was at least 15-fold lower than that of the WT rcHiPIP, indicating that the introduction of a positive charge at position 48 diminishes self-association of the HiPIP in solution. Moreover, the substitution at position 48 abolished the fine structure in the g(z) region of the electron paramagnetic resonance (EPR) spectrum of oxidized C. vinosum rcHiPIP recorded in the presence of 1 M sodium chloride. These results support the hypothesis that the flattened, relatively hydrophobic patch mediates interaction between two molecules of HiPIP and that freezing-induced dimerization of the HiPIP mediated by this patch is responsible for the unusual fine structure observed in the EPR spectrum of the oxidized C. vinosum HiPIP.

The structure of iron-sulfur proteins

Ferredoxins are a group of iron-sulfur proteins for which a wealth of structural and mutational data have recently become available. Previously unknown structures of ferredoxins which are adapted to halophilic, acidophilic or hyperthermophilic environments and new cysteine patterns for cluster ligation and non-cysteine cluster ligation have been described. Site-directed mutagenesis experiments have given insight into factors that influence the geometry, stability, redox potential, electronic properties and electron-transfer reactivity of iron-sulfur clusters.

Topological chirality of iron-sulfur proteins

An examination of x-ray structures of single-cluster [4Fe-4S] proteins in the Protein Data Bank has revealed that all redox proteins and the glutamine 5-phosphoribosyl-l-pyrophosphate amidotransferase from Bacillus subtilis have a topological configuration arbitrarily designated as D, whereas the DNA repair enzyme endonuclease III from Escherichia coli has the opposite topological configuration L. This is the first example in which both senses of topological chirality have been observed in a class of proteins.

The primary structure of Rhodoferax fermentans high-potential iron-sulfur protein, an electron donor to the photosynthetic reaction center

The complete amino acid sequence of Rhodoferax fermentans high-potential iron-sulfur protein (Hipip), which is known to be an efficient electron donor to the photosynthetic reaction center, has been determined using both N-terminal and C-terminal analyses. The sequence contains 75 residues, with 11 positive charges, 10 negative charges, and one histidine residue. The molecular mass of apo-Hipip, determined by electrospray ionization mass spectrometry, is 7849.64 Da. Multiple sequence alignment, based both on primary and tertiary structure information, reveals conservation of Tyr19 and Gly75 (Chromatium vinosum numbering) in addition to the four [Fe4S4]-bound cysteines. The Hipip from Rf. fermentans is most similar (57% similarity) to the Hipip from Rubrivivax gelatinosus, a photosynthetic bacterium belonging to the beta-1 subgroup of the proteobacteria.

Structural origins of redox potentials in Fe-S proteins: electrostatic potentials of crystal structures

Redox potentials often differ dramatically for homologous proteins that have identical redox centers. For two types of iron-sulfur proteins, the rubredoxins and the high-potential iron-sulfur proteins (HiPIPs), no structural explanations for these differences have been found. We calculated the classical electrostatic potential at the redox site using static crystal structures of four rubredoxins and four HiPIPs to identify important structural determinants of their redox potentials. The contributions from just the backbone and polar side chains are shown to explain major features of the experimental redox potentials. For instance, in the rubredoxins, the presence of Val 44 versus Ala 44 causes a backbone shift that explains a approximately 50 mV lower redox potential in one of the four rubredoxins. This result is consistent with experimental redox potentials of five additional rubredoxins with known sequence. Also, we attribute the unusually lower redox potentials of two of the HiPIPs studied to a less positive electrostatic environment around their redox sites. Finally, molecular dynamics simulations of solvent around static rubredoxin crystal structures indicate that water alone is a major factor in dampening the contribution of charged side chains, in accord with experiments showing that mutations of surface charges produce relatively little effect on redox potentials.

1H NMR of high-potential iron-sulfur protein from the purple non-sulfurbacterium Rhodoferax fermentans

Oxidized and reduced forms of high-potential iron-sulfur protein (HiPIP) from the purple non-sulfur photosynthetic bacterium Rhodoferax fermentans have been characterized using 1H-NMR spectroscopy. Pairwise and sequence-specific assignments of hyperfine-shifted 1H-NMR signals to protons of cysteine residues bound to the [4Fe-4S]3+/2+ cluster have been performed using one-dimensional NOE and exchange spectroscopy experiments. 1H-NMR hyperfine shifts and relaxation rates of cluster-bound Cys beta-CH2 protons indicate that in the [4Fe-4S]3+ cluster one iron ion can be formally described as Fe(III), while electron density corresponding to one electron is unevenly delocalized onto the remaining three iron ions. This delocalization is effected by means of two different electronic distributions interconverting rapidly on the NMR time scale. The mechanism of paramagnetic proton relaxation, studied by analyzing longitudinal relaxation rates of Cys beta-CH2 protons in HiPIPs from six different sources as a function of the Fe-S-C beta-C alpha dihedral angle, indicate that the major contribution is due to a dipolar metal-centered mechanism, with a non-negligible contribution from a ligand-centered dipolar mechanism which involves the 3p orbital of the Cys sulfur atom. A semi-quantitative tool for extracting structural information from relaxation time measurements is proposed.

The role of a conserved tyrosine residue in high-potential iron sulfur proteins

Conserved tyrosine-12 of Ectothiorhodospira halophila high-potential iron sulphur protein (HiPIP) iso-I was substituted with phenylalanine (Y12F), histidine (Y12H), tryptophan (Y12W), isoleucine (Y12I), and alanine (Y12A). Variants Y12A and Y12I were expressed to reasonable levels in cells grown at lower temperatures, but decomposed during purification. Variants Y12F, Y12H, and Y12W were substantially destabilized with respect to the recombinant wild-type HiPIP (rcWT) as determined by differential scanning calorimetry over a pH range of 7.0-11.0. Characterization of the Y12F variant by NMR indicates that the principal structural differences between this variant and the rcWT HiPIP result from the loss of the two hydrogen bonds of the Tyr-12 hydroxyl group with Asn-14 O delta 1 and Lys-59 NH, respectively. The effect of the loss of the latter interaction is propagated through the Lys-59/Val-58 peptide bond, thereby perturbing Gly-46. The delta delta GDapp of Y12F of 2.3 kcal/mol with respect to rcWT HiPIP (25 degrees C, pH 7.0) is entirely consistent with the contribution of these two hydrogen bonds to the stability of the latter. CD measurements show that Tyr-12 influences several electronic transitions within the cluster. The midpoint reduction potentials of variants Y12F, Y12H, and Y12W were 17, 19, and 22 mV (20 mM MOPS, 0.2 M sodium chloride, pH 6.98, 25 degrees C), respectively, higher than that of rcWT HiPIP. The current results indicate that, although conserved Tyr-12 modulates the properties of the cluster, its principle function is to stabilize the HiPIP through hydrogen bonds involving its hydroxyl group and electrostatic interactions involving its aromatic ring.

Reversible super-reduction of the cubane [4Fe-4S](3+;2+;1+) in the high-potential iron-sulfur protein under non-denaturing conditions. EPR spectroscopic and electrochemical studies

The reversible 2 x 1 e- reduction of the cubane cluster from oxidized to reduced to super-reduced states ([4Fe-4S]3+<-->[4Fe-4S]2+<-->[4Fe-4S]1+) was studied in high-potential iron-sulfur proteins (HiPIPs). Super-reduction to the 1+ state was not observed in any of the seven HiPIPs tested during cyclic voltammetry (down to -0.95 V). However, equilibration at low potential (pH 7.5) of Rhodopila globiformis HiPIP yields a transient peak around -0.47 V due to the oxidation of super-reduced HiPIP adsorbed at the electrode. The peak area depends on the equilibration potential according to a one-electron Nernst curve with a half-wave potential at -0.91 V. Reduction of R. globiformis HiPIP with titanium (III)citrate at pH 9.5 is very slow [pseudo-first-order half-life of 23 min with a 100-fold excess Ti(III)] but is reversible, and the EPR spectrum with g values of 2.04 and 1.92 is similar to that of reduced [4Fe-4S]1+ ferredoxins. Chemical or electrochemical reoxidation of the super-reduced form resulted in an EPR spectrum with g parallel = 2.12 and g perpendicular = 2.03, i.e. identical to that of oxidized HiPIP. From the equilibrium concentration of super-reduced HiPIP at a low concentration of Ti(III), a reduction potential of -0.64 V can be estimated. Super-reduction of the large HiPIP (iso-2) from Rhodospirillum salinarum is also possible with Ti(III)(gz = 2.05) but the super-reduced state is unstable. No super-reduction with Ti(III) was observed for the other HiPIPs. The difference between the electrochemically observed reduction potential and oxidation potential is explained by a fast and reversible conformational change upon super-reduction. The rate of super-reduction with Ti(III) is limited by the small amount (0.1%) of HiPIP in the 2+ state with the super-reduced conformation.

Refined crystal structure of the 2[4Fe-4S] ferredoxin from Clostridium acidurici at 1.84 A resolution

The crystal structure of the 2[4Fe-4S] ferredoxin from Clostridium acidurici has been determined at a resolution of 1.84 A and refined to an R-factor of 0.169. Crystals belong to space group P4(3)2(1)2 with unit cell dimensions a = b = 34.44 A and c = 74.78 A. The structure was determined by molecular replacement using the previously published model of an homologous ferredoxin and refined by molecular dynamics techniques. The model contains the protein and 46 water molecules. Only two amino acid residues, Asp27 and Asp28, are poorly defined in the electron density maps. The molecule has an overall chain fold similar to that of other [4Fe-4S] bacterial ferredoxins of known structure. The two [4Fe-4S] clusters display similar bond distances and angles. In both of them the co-ordination of one iron atom (bound to Cys11 and Cys40) is slightly distorted as compared with that of the other iron atoms. A core of hydrophobic residues and a few water molecules contribute to the stability of the structure. The [4Fe-4S] clusters interact with the polypeptide chain through eight hydrogen bonds each, in addition to the covalent Fe-Scys bonds. The ferredoxin from Clostridium acidurici is the most typical clostridial ferredoxin crystallized so far and the biological implications of the newly determined structure are discussed.

Sequence-specific assignment of the 1H and 15N nuclear magnetic resonance spectra of the reduced recombinant high-potential iron-sulfur protein I from Ectothiorhodospira halophila

A 1H and 15N NMR investigation through two-dimensional and three-dimensional spectroscopy has been performed on the reduced form ([Fe4S4]2+) of the recombinant high-potential iron-sulfur protein (HiPIP) I from Ectothiorhodospira halophila expressed in Escherichia coli. [Fe4S4]2+ clusters in proteins are paramagnetic with a relatively low mu eff of about 0.8 mu B/iron ion, but the paramagnetic effects on nuclear relaxation are so strong as to yield T1 values of a few milliseconds and linewidths of hundreds of hertz for the nuclei closet to the paramagnetic center. Despite these features, 71 out of 73 residues were identified, most of which were assigned completely as far as proton resonances are concerned; as many as 68 residues could be assigned without any reference to the existing X-ray structure. A total of 88% of all protein protons and 58 out of 69 peptide HN nitrogen signals were assigned. To the best of our knowledge, this is the most extensive 1H assignment of a paramagnetic protein to date. Protons sensitive to the proximity of the cluster were assigned through suitable NOE spectroscopy experiments. Three out of the four coordinated cysteines were assigned, and two residues have been identified whose peptide HN protons give rise to H bonds with coordinated sulfur atoms. The inter-residue NOE cross peaks are in qualitative agreement with the secondary and tertiary structure as obtained from the available X-ray crystallographic analysis of the wild-type protein at 250-pm resolution. It is therefore shown that the expressed protein is properly folded and that it is a reliable model for the wild-type protein. These data are meaningful for the detection of structural differences among mutants in future studies.

The three-dimensional structure in solution of the paramagnetic high-potential iron-sulfur protein I from Ectothiorhodospira halophila through nuclear magnetic resonance

The three-dimensional structure in solution of reduced recombinant high-potential iron-sulfur protein iso-I from Ectothiorhodospira halophila was determined using 948 relevant interproton NOEs out of the 1246 observed NOEs. The determination was accomplished using the XEASY program for spectral analysis and the distance geometry (DG) program DIANA for generation of the structure as described by Wüthrich [Wüthrich, K. (1989) Acc. Chem. Res. 22, 36-44]. The FeS cluster was simulated using an amino acid residue constructed for the present work from a cysteinyl residue with an iron and a sulfur atom attached to the terminal thiol. The family of structures obtained from distance geometry were subjected to energy minimization and molecular dynamics simulations using previously defined force field parameters. The quality of these structures at each stage of the refinement process is discussed with respect to the dihedral angle order parameter and the root-mean-square deviation of the atomic coordinates. The latter values for the backbone atoms vary from 67 pm for the distance-geometry structures to 60 pm for the energy-minimized structures to 51 pm for the structures subjected to restrained molecular dynamics. Finally, the structure in best agreement with the NOE constraints has been further treated with extensive restrained molecular dynamics in water. The solution structure is well defined and is very similar to the available X-ray structure. We do not know of any previous determination of the structure of a paramagnetic protein in solution by NMR. The effect of paramagnetism on the quality of the structure determination is discussed.