Specific heterodimer formation by the cytoplasmic domains of the b and b' subunits of cyanobacterial ATP synthase

ATP synthase in mycobacteria: special features and implications for a function as drug target

ATP synthase is a ubiquitous enzyme that is largely conserved across the kingdoms of life. This conservation is in accordance with its central role in chemiosmotic energy conversion, a pathway utilized by far by most living cells. On the other hand, in particular pathogenic bacteria whilst employing ATP synthase have to deal with energetically unfavorable conditions such as low oxygen tensions in the human host, e.g. Mycobacterium tuberculosis can survive in human macrophages for an extended time. It is well conceivable that such ATP synthases may carry idiosyncratic features that contribute to efficient ATP production. In this review genetic and biochemical data on mycobacterial ATP synthase are discussed in terms of rotary catalysis, stator composition, and regulation of activity. ATP synthase in mycobacteria is of particular interest as this enzyme has been validated as a target for promising new antibacterial drugs. A deeper understanding of the working of mycobacterial ATP synthase and its atypical features can provide insight in adaptations of bacterial energy metabolism. Moreover, pinpointing and understanding critical differences as compared with human ATP synthase may provide input for the design and development of selective ATP synthase inhibitors as antibacterials. This article is part of a Special Issue entitled: 18th European Bioenergetic Conference.

Escherichia coli F1Fo-ATP synthase with a b/δ fusion protein allows analysis of the function of the individual b subunits

The "stator stalk" of F1Fo-ATP synthase is essential for rotational catalysis as it connects the nonrotating portions of the enzyme. In Escherichia coli, the stator stalk consists of two (identical) b subunits and the δ subunit. In mycobacteria, one of the b subunits and the δ subunit are replaced by a b/δ fusion protein; the remaining b subunit is of the shorter b' type. In the present study, it is shown that it is possible to generate a functional E. coli ATP synthase containing a b/δ fusion protein. This construct allowed the analysis of the roles of the individual b subunits. The full-length b subunit (which in this case is covalently linked to δ in the fusion protein) is responsible for connecting the stalk to the catalytic F1 subcomplex. It is not required for interaction with the membrane-embedded Fo subcomplex, as its transmembrane helix can be removed. Attachment to Fo is the function of the other b subunit which in turn has only a minor (if any at all) role in binding to δ. Also in E. coli the second b subunit can be shortened to a b' type.

Individual interactions of the b subunits within the stator of the Escherichia coli ATP synthase

FOF1 ATP synthases are rotary nanomotors that couple proton translocation across biological membranes to the synthesis/hydrolysis of ATP. During catalysis, the peripheral stalk, composed of two b subunits and subunit δ in Escherichia coli, counteracts the torque generated by the rotation of the central stalk. Here we characterize individual interactions of the b subunits within the stator by use of monoclonal antibodies and nearest neighbor analyses via intersubunit disulfide bond formation. Antibody binding studies revealed that the C-terminal region of one of the two b subunits is principally involved in the binding of subunit δ, whereas the other one is accessible to antibody binding without impact on the function of FOF1. Individually substituted cysteine pairs suitable for disulfide cross-linking between the b subunits and the other stator subunits (b-α, b-β, b-δ, and b-a) were screened and combined with each other to discriminate between the two b subunits (i.e. bI and bII). The results show the b dimer to be located at a non-catalytic α/β cleft, with bI close to subunit α, whereas bII is proximal to subunit β. Furthermore, bI can be linked to subunit δ as well as to subunit a. Among the subcomplexes formed were a-bI-α, bII-β, α-bI-bII-β, and a-bI-δ. Taken together, the data obtained define the different positions of the two b subunits at a non-catalytic interface and imply that each b subunit has a different role in generating stability within the stator. We suggest that bI is functionally related to the single b subunit present in mitochondrial ATP synthase.

Identification of chromatophore membrane protein complexes formed under different nitrogen availability conditions in Rhodospirillum rubrum

The chromatophore membrane of the photosynthetic diazotroph Rhodospirillum rubrum is of vital importance for a number of central processes, including nitrogen fixation. Using a novel amphiphile, we have identified protein complexes present under different nitrogen availability conditions by the use of two-dimensional Blue Native/SDS-PAGE and NSI-LC-LTQ-Orbitrap mass spectrometry. We have identified several membrane protein complexes, including components of the ATP synthase, reaction center, light harvesting, and NADH dehydrogenase complexes. Additionally, we have identified differentially expressed proteins, such as subunits of the succinate dehydrogenase complex and other TCA cycle enzymes that are usually found in the cytosol, thus hinting at a possible association to the membrane in response to nitrogen deficiency. We propose a redox sensing mechanism that can influence the membrane subproteome in response to nitrogen availability.

Oligomeric characterization of the photosynthetic apparatus of Rhodobacter sphaeroides R26.1 by nondenaturing electrophoresis methods

Blue and colorless native gel electrophoresis in combination with LC-ESI-MS/MS are powerful tools in the analysis of protein networks in biological membranes. We used these techniques in the present study to generate a comprehensive overview on a proteome-wide scale of intracytoplasmic membrane (ICM) associated proteins in order to investigate the native supramolecular organization of Rhodobacter sphaeroides R26.1 photosynthetic apparatus. The results obtained were compared with past proteomic data, as well as with models for the topology of photosynthetic membranes as derived from previously published atomic force microscopy studies. We identified 52 proteins organized in 10 different multiprotein complexes. We were able to demonstrate the existence of different oligomeric states for the integral membrane pigment-protein complexes dedicated to bacterial photosynthesis. Specifically, we found dimers and trimers, as well as supercomplexes of light-harvesting (LH) 2 at very high molecular weights (around 10,000 kDa). We recovered the monomeric form of the photochemical reaction center (RC), as well as the monomer and dimer of the reaction center-light harvesting 1-PufX (RC-LH1-PufX) complex. Curiously, no type of LH1 complex was detected. Lastly, ATP synthase and cytochrome bc(1) complexes were only recovered in their monomeric states. Purified ICM vesicles were shown to be rich in newly discovered gene products, including three proteins with unknown functions (RSP_2125, RSP_3238, RSP_6207), a possible alkane hydroxylase and a spheroidene monooxygenase. Other multiprotein complexes were found to be localized in the ICM, including succinate dehydrogenase in trimeric form and sarcosine oxidase in two different aggregation states. These findings contribute to the growing body of evidence that the bacterial ICM is a specialized bioenergetic membrane hosting, not only photosynthesis, but many other critical activities.

Role of the Asymmetry of the Homodimeric b2 Stator Stalk in the Interaction with the F1 Sector of Escherichia coli ATP Synthase

The b subunit dimer in the peripheral stator stalk of Escherichia coli ATP synthase is essential for enzyme assembly and the rotational catalytic mechanism. Recent protein chemical evidence revealed the dimerization domain of b to contain a novel two-stranded right-handed coiled coil with offset helices. Here, the existence of this structure in more complete constructs of b containing the C-terminal domain, and therefore capable of binding to the peripheral F1-ATPase, was supported by the more efficient formation of intersubunit disulfide bonds between cysteine residues that are proximal only in the offset arrangement and by the greater thermal stabilities of cross-linked heterodimers trapped in the offset configuration as opposed to homodimers with the helices trapped in-register. F1-ATPase binding analyses revealed the offset heterodimers to bind F1 more tightly than in-register homodimers. Mutations near the C terminus of b were incorporated specifically into either the N-terminally or the C-terminally shifted polypeptide, bN or bC, respectively, to determine the contribution of each position to F1 binding. Deletion of the last four residues of bN substantially weakened F1 binding, whereas the effect of the deletion in bC was modest. Similarly, benzophenone maleimide introduced at the C terminus of bN, but not bC, mediated cross-linking to the delta subunit of F1. These results imply that the polypeptide in the bN position is more important for F1 binding than the one in the bC position and illustrate the significance of the asymmetry of the b dimer in the enzyme.

Functional incorporation of chimeric b subunits into F1Fo ATP synthase

F(1)F(o) ATP synthases function by a rotary mechanism. The enzyme's peripheral stalk serves as the stator that holds the F(1) sector and its catalytic sites against the movement of the rotor. In Escherichia coli, the peripheral stalk is a homodimer of identical b subunits, but photosynthetic bacteria have open reading frames for two different b-like subunits thought to form heterodimeric b/b' peripheral stalks. Chimeric b subunit genes have been constructed by substituting sequence from the Thermosynechococcus elongatus b and b' genes in the E. coli uncF gene, encoding the b subunit. The recombinant genes were expressed alone and in combination in the E. coli deletion strain KM2 (Deltab). Although not all of the chimeric subunits were incorporated into F(1)F(o) ATP synthase complexes, plasmids expressing either chimeric b(E39-I86) or b'(E39-I86) were capable of functionally complementing strain KM2 (Deltab). Strains expressing these subunits grew better than cells with smaller chimeric segments, such as those expressing the b'(E39-D53) or b(L54-I86) subunit, indicating intragenic suppression. In general, the chimeric subunits modeled on the T. elongatus b subunit proved to be more stable than the b' subunit in vitro. Coexpression of the b(E39-I86) and b'(E39-I86) subunits in strain KM2 (Deltab) yielded F(1)F(o) complexes containing heterodimeric peripheral stalks composed of both subunits.

ATP synthase b subunit dimerization domain: a right-handed coiled coil with offset helices

The dimerization domain of Escherichia coli ATP synthase b subunit forms an atypical parallel two-stranded coiled coil. Sequence analysis reveals an 11-residue abcdefghijk repeat characteristic of right-handed coiled coils, but no other naturally occurring parallel dimeric structure of this class has been identified. The arrangement of the helices was studied by their propensity to form interhelix disulfide linkages and analysis of the stability and shape of disulfide-linked dimers. Disulfides formed preferentially between cysteine residues in an a position of one helix and either of the adjacent h positions of the partner. Such heterodimers were far more stable to thermal denaturation than homodimers and, on the basis of gel-filtration chromatography studies, were similar in shape to both non-covalent dimers and dimers linked through flexible Gly(1-3)Cys C-terminal extensions. The results indicate a right-handed coiled-coil structure with intrinsic asymmetry, the two helices being offset rather than in register. A function for the right-handed coiled coil in rotational catalysis is proposed.

Modulation of proton pumping efficiency in bacterial ATP synthases

The ATP synthase in chromatophores of Rhodobacter caspulatus can effectively generate a transmembrane pH difference coupled to the hydrolysis of ATP. The rate of hydrolysis was rather insensitive to the depletion of ADP in the assay medium by an ATP regenerating system (phospho-enol-pyruvate (PEP) and pyruvate kinase (PK)). The steady state values of DeltapH were however drastically reduced as a consequence of ADP depletion. The clamped concentrations of ADP obtained using different PK activities in the assay medium could be calculated and an apparent Kd approximately 0.5 microM was estimated. The extent of proton uptake was also strongly dependent on the addition of phosphate to the assay medium. The Kd for this effect was about 70 microM. Analogous experiments were performed in membrane fragment from Escherichia coli. In this case, however, the hydrolysis rate was strongly inhibited by Pi, added up to 3 mM. Inhibition by Pi was nearly completely suppressed following depletion of ADP. The Kd's for the ADP and Pi were in the micromolar range and submillimolar range, respectively, and were mutually dependent from the concentration of the other ligand. Contrary to hydrolysis, the pumping of protons was rather insensitive to changes in the concentrations of the two ligands. At intermediate concentrations, proton pumping was actually stimulated, while the hydrolysis was inhibited. It is concluded that, in these two bacterial organisms, ADP and phosphate induce a functional state of the ATP synthase competent for a tightly coupled proton pumping, while the depletion of either one of these two ligands favors an inefficient (slipping) functional state. The switch between these states can probably be related to a structural change in the C-terminal alpha-helical hairpin of the epsilon-subunit, from an extended conformation, in which ATP hydrolysis is tightly coupled to proton pumping, to a retracted one, in which ATP hydrolysis and proton pumping are loosely coupled.

The peripheral stalk of the mitochondrial ATP synthase

The peripheral stalk of F-ATPases is an essential component of these enzymes. It extends from the membrane distal point of the F1 catalytic domain along the surface of the F1 domain with subunit a in the membrane domain. Then, it reaches down some 45 A to the membrane surface, and traverses the membrane, where it is associated with the a-subunit. Its role is to act as a stator to hold the catalytic alpha3beta3 subcomplex and the a-subunit static relative to the rotary element of the enzyme, which consists of the c-ring in the membrane and the attached central stalk. The central stalk extends up about 45 A from the membrane surface and then penetrates into the alpha3beta3 subcomplex along its central axis. The mitochondrial peripheral stalk is an assembly of single copies of the oligomycin sensitivity conferral protein (the OSCP) and subunits b, d and F6. In the F-ATPase in Escherichia coli, its composition is simpler, and it consists of a single copy of the delta-subunit with two copies of subunit b. In some bacteria and in chloroplasts, the two copies of subunit b are replaced by single copies of the related proteins b and b' (known as subunits I and II in chloroplasts). As summarized in this review, considerable progress has been made towards establishing the structure and biophysical properties of the peripheral stalk in both the mitochondrial and bacterial enzymes. However, key issues are unresolved, and so our understanding of the role of the peripheral stalk and the mechanism of synthesis of ATP are incomplete.

ATP synthase: subunit-subunit interactions in the stator stalk

In ATP synthase, proton translocation through the Fo subcomplex and ATP synthesis/hydrolysis in the F1 subcomplex are coupled by subunit rotation. The static, non-rotating portions of F1 and Fo are attached to each other via the peripheral "stator stalk", which has to withstand elastic strain during subunit rotation. In Escherichia coli, the stator stalk consists of subunits b2delta; in other organisms, it has three or four different subunits. Recent advances in this area include affinity measurements between individual components of the stator stalk as well as a detailed analysis of the interaction between subunit delta (or its mitochondrial counterpart, the oligomycin-sensitivity conferring protein, OSCP) and F1. The current status of our knowledge of the structure of the stator stalk and of the interactions between its subunits will be discussed in this review.

Mutations in the dimerization domain of the b subunit from the Escherichia coli ATP synthase. Deletions disrupt function but not enzyme assembly

The b subunit dimer of Escherichia coli ATP synthase serves essential roles as an assembly factor for the enzyme and as a stator during rotational catalysis. To investigate the functional importance of its coiled coil dimerization domain, a series of internal deletions including each individual residue between Lys-100 and Ala-105 (b(deltaK100)-b(deltaA105)), b(deltaK100-A103), and b(deltaK100-Q106) as well as a control b(K100A) missense mutation were prepared. All of the mutants supported assembly of ATP synthase, but all single-residue deletions failed to support growth on acetate, indicating a severe defect in oxidative phosphorylation, and b(deltaK100-Q106) displayed moderately reduced growth. The membrane-bound ATPase activities of these strains showed a related reduction in sensitivity to dicyclohexylcarbodiimide, indicative of uncoupling. Analysis of dimerization of the soluble constructs of b(deltaK100) and the multiple-residue deletions by sedimentation equilibrium revealed reduced dimerization compared with wild type for all deletions, with b(deltaK100-Q106) most severely affected. In cross-linking studies it was found that F1-ATPase can mediate the dimerization of some soluble b constructs but did not mediate dimerization of b(deltaK100) and b(deltaK100-Q106); these two forms also were defective in F1 binding analyses. We conclude that defective dimerization of soluble b constructs severely affects F1 binding in vitro, yet allows assembly of ATP synthase in vivo. The highly uncoupled nature of enzymes with single-residue deletions in b indicates that the b subunit serves an active function in energy coupling rather than just holding on to the F1 sector. This function is proposed to depend on proper, specific interactions between the b subunits and F1.

Assessing the precision of high-throughput computational and laboratory approaches for the genome-wide identification of protein subcellular localization in bacteria

BACKGROUND

Identification of a bacterial protein's subcellular localization (SCL) is important for genome annotation, function prediction and drug or vaccine target identification. Subcellular fractionation techniques combined with recent proteomics technology permits the identification of large numbers of proteins from distinct bacterial compartments. However, the fractionation of a complex structure like the cell into several subcellular compartments is not a trivial task. Contamination from other compartments may occur, and some proteins may reside in multiple localizations. New computational methods have been reported over the past few years that now permit much more accurate, genome-wide analysis of the SCL of protein sequences deduced from genomes. There is a need to compare such computational methods with laboratory proteomics approaches to identify the most effective current approach for genome-wide localization characterization and annotation.

RESULTS

In this study, ten subcellular proteome analyses of bacterial compartments were reviewed. PSORTb version 2.0 was used to computationally predict the localization of proteins reported in these publications, and these computational predictions were then compared to the localizations determined by the proteomics study. By using a combined approach, we were able to identify a number of contaminants and proteins with dual localizations, and were able to more accurately identify membrane subproteomes. Our results allowed us to estimate the precision level of laboratory subproteome studies and we show here that, on average, recent high-precision computational methods such as PSORTb now have a lower error rate than laboratory methods.

CONCLUSION

We have performed the first focused comparison of genome-wide proteomic and computational methods for subcellular localization identification, and show that computational methods have now attained a level of precision that is exceeding that of high-throughput laboratory approaches. We note that analysis of all cellular fractions collectively is required to effectively provide localization information from laboratory studies, and we propose an overall approach to genome-wide subcellular localization characterization that capitalizes on the complementary nature of current laboratory and computational methods.

Structure of the F1-binding domain of the stator of bovine F1Fo-ATPase and how it binds an alpha-subunit

The peripheral stalk of ATP synthase holds the alpha3beta3 catalytic subcomplex stationary against the torque of the rotating central stalk. In bovine mitochondria, the N-terminal domain of the oligomycin sensitivity conferral protein (OSCP-NT; residues 1-120) anchors one end of the peripheral stalk to the N-terminal tails of one or more alpha-subunits of the F1 subcomplex. Here we present the solution structure of OSCP-NT and an NMR titration study of its interaction with peptides representing N-terminal tails of F1 alpha-subunits. The structure comprises a bundle of six alpha-helices, and its interaction site contains adjoining hydrophobic surfaces of helices 1 and 5; residues in the region 1-8 of the alpha-subunit are essential for the interaction. The OSCP-NT is similar to the N-terminal domain of the delta-subunit from Escherichia coli ATP synthase (delta-NT), except that their surface charges differ (basic and acidic, respectively). As the charges of the adjacent crown regions in their alpha3beta3 complexes are similar, the OSCP-NT and delta-NT probably do not contact the crowns extensively. The N-terminal tails of alpha-subunit tails are probably alpha-helical, and so this interface, which is essential for the rotary mechanism of the enzyme, appears to consist of helix-helix interactions.

ATP synthase motor components: proposal and animation of two dynamic models for stator function

Recent research indicates that ATP synthases (F(0)F(1)) contain two distinct nanomotors, one an electrochemically driven proton motor contained within F(0) that drives an ATP hydrolysis-driven motor (F(1)) in reverse during ATP synthesis. This is depicted in recent models as involving a series of events in which each of the three alphabeta pairs comprising F(1) is induced via a centrally rotating subunit (gamma) to undergo the sequential binding changes necessary to synthesize ATP (binding change mechanism). Stabilization of this rotary process (i.e., to minimize "wobble" of F(1)) is provided in current models by a peripheral stalk or "stator" that has recently been shown to extend from near the bottom of the ATP synthase molecule to the very top of F(1). Although quite elegant, these models envision the stator as fixed during ATP synthesis, i.e., bound to only a single alphabeta pair. This is despite the fact that the binding change mechanism views each alphabeta pair as going through the same sequential order of conformational changes which demonstrate a chemical equivalency among them. For this reason, we propose here two different dynamic models for stator function during ATP synthesis. Both models have been designed to maintain chemical equivalency among the three alphabeta pairs during ATP synthesis and both have been animated.