Infrared studies on the interaction of carbon monoxide with divalent nickel in hydrogenase from Chromatium vinosum

Expanding the scope of resonance Raman spectroscopy in hydrogenase research: New observable states and reporter vibrations

Oxygen-tolerant [NiFe] hydrogenases are valuable blueprints for the activation and evolution of molecular hydrogen under application-relevant conditions. Vibrational spectroscopic techniques play a key role in the investigation of these metalloenzymes. For instance, resonance Raman spectroscopy has been introduced as a site-selective approach for probing metal-ligand coordinates of the [NiFe] active site and FeS clusters. Despite its success, this approach is still challenged by a limited number of detectable active-site states - due to missing resonance enhancement or intrinsic light sensitivity - and difficulties in their assignment. Utilizing two oxygen-tolerant [NiFe] hydrogenases as model systems, we illustrate how these challenges can be met by extending excitation and detection wavelength regimes in resonance Raman spectroscopic studies. Specifically, we observe that this technique does not only probe low-frequency metal-ligand vibrations but also high-frequency intra-ligand modes of the diatomic CO/CN- ligands at the active site of [NiFe] hydrogenases. These reporter vibrations are routinely probed by infrared absorption spectroscopy, so that direct comparison of spectra from both techniques allows an unambiguous assignment of states detected by resonance Raman spectroscopy. Moreover, we find that a previously undetected state featuring a bridging hydroxo ligand between Ni and Fe can be probed using higher excitation wavelengths, as photoconversion occurring at lower wavelengths is avoided. In summary, this study expands the applicability of resonance Raman spectroscopy to hydrogenases and other complex metalloenzymes by introducing new strategies for probing and assigning redox-structural states of the active site.

Light-Induced Electron Transfer in a [NiFe] Hydrogenase Opens a Photochemical Shortcut for Catalytic Dihydrogen Cleavage

[NiFe] hydrogenases catalyze the reversible cleavage of molecular hydrogen into protons and electrons. Here, we have studied the impact of temperature and illumination on an oxygen-tolerant and thermostable [NiFe] hydrogenase by IR and EPR spectroscopy. Equilibrium mixtures of two catalytic [NiFe] states, Nia-C and Nia-SR'', were found to drastically change with temperature, indicating a thermal exchange of electrons between the [NiFe] active site and iron-sulfur clusters of the enzyme. In addition, IR and EPR experiments performed under illumination revealed an unusual photochemical response of the enzyme. Nia-SR'', a fully reduced hydride intermediate of the catalytic cycle, was found to be reversibly photoconverted into another catalytic state, Nia-L. In contrast to the well-known photolysis of the more oxidized hydride intermediate Nia-C, photoconversion of Nia-SR'' into Nia-L is an active-site redox reaction that involves light-driven electron transfer towards the enzyme's iron-sulfur clusters. Omitting the ground-state intermediate Nia-C, this direct interconversion of these two states represents a potential photochemical shortcut of the catalytic cycle that integrates multiple redox sites of the enzyme. In total, our findings reveal the non-local redistribution of electrons via thermal and photochemical reaction channels and the potential of accelerating or controlling [NiFe] hydrogenases by light.

Understanding the [NiFe] Hydrogenase Active Site Environment through Ultrafast Infrared and 2D-IR Spectroscopy of the Subsite Analogue K[CpFe(CO)(CN)2] in Polar and Protic Solvents

The [CpFe(CO)(CN)2]- unit is an excellent structural model for the Fe(CO)(CN)2 moiety of the active site found in [NiFe] hydrogenases. Ultrafast infrared (IR) pump-probe and 2D-IR spectroscopy have been used to study K[CpFe(CO)(CN)2] (M1) in a range of protic and polar solvents and as a dry film. Measurements of anharmonicity, intermode vibrational coupling strength, vibrational relaxation time, and solvation dynamics of the CO and CN stretching modes of M1 in H2O, D2O, methanol, dimethyl sulfoxide, and acetonitrile reveal that H-bonding to the CN ligands plays an important role in defining the spectroscopic characteristics and relaxation dynamics of the Fe(CO)(CN)2 unit. Comparisons of the spectroscopic and dynamic data obtained for M1 in solution and in a dry film with those obtained for the enzyme led to the conclusion that the protein backbone forms an important part of the bimetallic active site environment via secondary coordination sphere interactions.

Real flue gas CO2 hydrogenation to formate by an enzymatic reactor using O2- and CO-tolerant hydrogenase and formate dehydrogenase

It is challenging to capture carbon dioxide (CO2), a major greenhouse gas in the atmosphere, due to its high chemical stability. One potential practical solution to eliminate CO2 is to convert CO2 into formate using hydrogen (H2) (CO2 hydrogenation), which can be accomplished with inexpensive hydrogen from sustainable sources. While industrial flue gas could provide an adequate source of hydrogen, a suitable catalyst is needed that can tolerate other gas components, such as carbon monoxide (CO) and oxygen (O2), potential inhibitors. Our proposed CO2 hydrogenation system uses the hydrogenase derived from Ralstonia eutropha H16 (ReSH) and formate dehydrogenase derived from Methylobacterium extorquens AM1 (MeFDH1). Both enzymes are tolerant to CO and O2, which are typical inhibitors of metalloenzymes found in flue gas. We have successfully demonstrated that combining ReSH- and MeFDH1-immobilized resins can convert H2 and CO2 in real flue gas to formate via a nicotinamide adenine dinucleotide-dependent cascade reaction. We anticipated that this enzyme system would enable the utilization of diverse H2 and CO2 sources, including waste gases, biomass, and gasified plastics.

Hydrogen-fueled CO2 reduction using oxygen-tolerant oxidoreductases

Hydrogen gas obtained from cheap or sustainable sources has been investigated as an alternative to fossil fuels. By using hydrogenase (H₂ase) and formate dehydrogenase (FDH), H₂ and CO₂ gases can be converted to formate, which can be conveniently stored and transported. However, developing an enzymatic process that converts H₂ and CO₂ obtained from cheap sources into formate is challenging because even a very small amount of O₂ included in the cheap sources damages most H₂ases and FDHs. In order to overcome this limitation, we investigated a pair of oxygen-tolerant H₂ase and FDH. We achieved the cascade reaction between H₂ase from Ralstonia eutropha H16 (ReSH) and FDH from Rhodobacter capsulatus (RcFDH) to convert H₂ and CO₂ to formate using in situ regeneration of NAD⁺/NADH in the presence of O₂.

Understanding 2D-IR Spectra of Hydrogenases: A Descriptive and Predictive Computational Study

[NiFe] hydrogenases are metalloenzymes that catalyze the reversible cleavage of dihydrogen (), a clean future fuel. Understanding the mechanism of these biocatalysts requires spectroscopic techniques that yield insights into the structure and dynamics of the [NiFe] active site. Due to the presence of CO and ligands at this cofactor, infrared (IR) spectroscopy represents an ideal technique for studying these aspects, but molecular information from linear IR absorption experiments is limited. More detailed insights can be obtained from ultrafast nonlinear IR techniques like IRpump−IRprobe and two-dimensional (2D-)IR spectroscopy. However, fully exploiting these advanced techniques requires an in-depth understanding of experimental observables and the encoded molecular information. To address this challenge, we present a descriptive and predictive computational approach for the simulation and analysis of static 2D-IR spectra of [NiFe] hydrogenases and similar organometallic systems. Accurate reproduction of experimental spectra from a first-coordination-sphere model suggests a decisive role of the [NiFe] core in shaping the enzymatic potential energy surface. We also reveal spectrally encoded molecular information that is not accessible by experiments, thereby helping to understand the catalytic role of the diatomic ligands, structural differences between [NiFe] intermediates, and possible energy transfer mechanisms. Our studies demonstrate the feasibility and benefits of computational spectroscopy in the 2D-IR investigation of hydrogenases, thereby further strengthening the potential of this nonlinear IR technique as a powerful research tool for the investigation of complex bioinorganic molecules.

Metal-ligand cooperativity in the soluble hydrogenase-1 from Pyrococcus furiosus

Metal–ligand cooperativity is an essential feature of bioinorganic catalysis. The design principles of such cooperativity in metalloenzymes are underexplored, but are critical to understand for developing efficient catalysts designed with earth abundant metals for small molecule activation. The simple substrate requirements of reversible proton reduction by the [NiFe]-hydrogenases make them a model bioinorganic system. A highly conserved arginine residue (R355) directly above the exogenous ligand binding position of the [NiFe]-catalytic core is known to be essential for optimal function because mutation to a lysine results in lower catalytic rates. To expand on our studies of soluble hydrogenase-1 from Pyrococcus furiosus (Pf SH1), we investigated the role of R355 by site-directed-mutagenesis to a lysine (R355K) using infrared and electron paramagnetic resonance spectroscopic probes sensitive to active site redox and protonation events. It was found the mutation resulted in an altered ligand binding environment at the [NiFe] centre. A key observation was destabilization of the Ni_a³⁺–C state, which contains a bridging hydride. Instead, the tautomeric Ni_a⁺–L states were observed. Overall, the results provided insight into complex metal–ligand cooperativity between the active site and protein scaffold that modulates the bridging hydride stability and the proton inventory, which should prove valuable to design principles for efficient bioinspired catalysts.

Metal–ligand cooperativity is an essential feature of bioinorganic catalysis.

Nitro reduction-based fluorescent probes for carbon monoxide require reactivity involving a ruthenium carbonyl moiety

Recently, several arylnitro-based fluorescent CO probes have been reported. The design was based on CO's ability to reduce an arylnitro group for fluorescence turn-on. In this work, we assessed the response of three published arylnitro-based fluorescent CO probes, namely COFP, LysoFP-NO2, and NIR-CO toward CO from various sources. We found that only ruthenium-based CO releasing molecules (CO-RMs) were able to turn on the fluorescence while pure CO gas and CO from other sources did not turn-on the probe in the absence of ruthenium. Further experiments with different ruthenium complexes indicate that the reduction of arylnitro group requires the ruthenium carbonyl complex as an essential ingredient. As further confirmation, we also conducted the reduction of the nitro group in a p-nitrobenzamide compound and came to the same conclusion. As such, COFP and related arynitro-based probes are able to sense CORM-2 and CORM-3, but not CO in general. Our findings also indicate the need to use CO from various sources in future assessment of new CO probes.

X-ray Crystallography and Vibrational Spectroscopy Reveal the Key Determinants of Biocatalytic Dihydrogen Cycling by [NiFe] Hydrogenases

[NiFe] hydrogenases are complex model enzymes for the reversible cleavage of dihydrogen (H₂). However, structural determinants of efficient H₂ binding to their [NiFe] active site are not properly understood. Here, we present crystallographic and vibrational‐spectroscopic insights into the unexplored structure of the H₂‐binding [NiFe] intermediate. Using an F₄₂₀‐reducing [NiFe]‐hydrogenase from Methanosarcina barkeri as a model enzyme, we show that the protein backbone provides a strained chelating scaffold that tunes the [NiFe] active site for efficient H₂ binding and conversion. The protein matrix also directs H₂ diffusion to the [NiFe] site via two gas channels and allows the distribution of electrons between functional protomers through a subunit‐bridging FeS cluster. Our findings emphasize the relevance of an atypical Ni coordination, thereby providing a blueprint for the design of bio‐inspired H₂‐conversion catalysts.

Understanding the structure and dynamics of hydrogenases by ultrafast and two-dimensional infrared spectroscopy

Hydrogenases are valuable model enzymes for sustainable energy conversion approaches using H2, but rational utilization of these base-metal biocatalysts requires a detailed understanding of the structure and dynamics of their complex active sites. The intrinsic CO and CN- ligands of these metalloenzymes represent ideal chromophores for infrared (IR) spectroscopy, but structural and dynamic insight from conventional IR absorption experiments is limited. Here, we apply ultrafast and two-dimensional (2D) IR spectroscopic techniques, for the first time, to study hydrogenases in detail. Using an O2-tolerant [NiFe] hydrogenase as a model system, we demonstrate that IR pump-probe spectroscopy can explore catalytically relevant ligand bonding by accessing high-lying vibrational states. This ultrafast technique also shows that the protein matrix is influential in vibrational relaxation, which may be relevant for energy dissipation from the active site during fast reaction steps. Further insights into the relevance of the active site environment are provided by 2D-IR spectroscopy, which reveals equilibrium dynamics and structural constraints imposed on the H2-accepting intermediate of [NiFe] hydrogenases. Both techniques offer new strategies for uniquely identifying redox-structural states in complex catalytic mixtures via vibrational quantum beats and 2D-IR off-diagonal peaks. Together, these findings considerably expand the scope of IR spectroscopy in hydrogenase research, and new perspectives for the characterization of these enzymes and other (bio-)organometallic targets are presented.

Hydrogenases

Hydrogenases catalyze the simple yet important interconversion between H₂ and protons and electrons. Found throughout prokaryotes, lower eukaryotes, and archaea, hydrogenases are used for a variety of redox and signaling purposes and are found in many different forms. This diverse group of metalloenzymes is divided into [NiFe], [FeFe], and [Fe] variants, based on the transition metal contents of their active sites. A wide array of biochemical and spectroscopic methods has been used to elucidate hydrogenases, and this along with a general description of the main enzyme types and catalytic mechanisms is discussed in this chapter.

Comprehensive reaction mechanisms at and near the Ni-Fe active sites of [NiFe] hydrogenases

[NiFe] hydrogenase (H2ase) catalyzes the oxidation of dihydrogen to two protons and two electrons and/or its reverse reaction. For this simple reaction, the enzyme has developed a sophisticated but intricate mechanism with heterolytic cleavage of dihydrogen (or a combination of a hydride and a proton), where its Ni-Fe active site exhibits various redox states. Recently, thermodynamic parameters of the acid-base equilibrium for activation-inactivation, a new intermediate in the catalytic reaction, and new crystal structures of [NiFe] H2ases have been reported, providing significant insights into the activation-inactivation and catalytic reaction mechanisms of [NiFe] H2ases. This Perspective provides an overview of the reaction mechanisms of [NiFe] H2ases based on these new findings.

Photoactivation of the Ni-SIr state to the Ni-SIa state in [NiFe] hydrogenase: FT-IR study on the light reactivity of the ready Ni-SIr state and as-isolated enzyme revisited

The Ni-SIr state of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F was photoactivated to its Ni-SIa state by Ar(+) laser irradiation at 514.5 nm, whereas the Ni-SL state was light induced from a newly identified state, which was less active than any other identified state and existed in the "as-isolated" enzyme.

Proton Transfer in the Catalytic Cycle of [NiFe] Hydrogenases: Insight from Vibrational Spectroscopy

Catalysis of H₂ production and oxidation reactions is critical in renewable energy systems based around H₂ as a clean fuel, but the present reliance on platinum-based catalysts is not sustainable. In nature, H₂ is oxidized at minimal overpotential and high turnover frequencies at [NiFe] catalytic sites in hydrogenase enzymes. Although an outline mechanism has been established for the [NiFe] hydrogenases involving heterolytic cleavage of H₂ followed by a first and then second transfer of a proton and electron away from the active site, details remain vague concerning how the proton transfers are facilitated by the protein environment close to the active site. Furthermore, although [NiFe] hydrogenases from different organisms or cellular environments share a common active site, they exhibit a broad range of catalytic characteristics indicating the importance of subtle changes in the surrounding protein in controlling their behavior. Here we review recent time-resolved infrared (IR) spectroscopic studies and IR spectroelectrochemical studies carried out in situ during electrocatalytic turnover. Additionally, we re-evaluate the significant body of IR spectroscopic data on hydrogenase active site states determined through more conventional solution studies, in order to highlight mechanistic steps that seem to apply generally across the [NiFe] hydrogenases, as well as steps which so far seem limited to specific groups of these enzymes. This analysis is intended to help focus attention on the key open questions where further work is needed to assess important aspects of proton and electron transfer in the mechanism of [NiFe] hydrogenases.

Dithiolato- and halogenido-bridged nickel–iron complexes related to the active site of [NiFe]-H2ases: preparation, structures, and electrocatalytic H2 production

A new series of [NiFe]-H₂ase mimics (5a,b–7a,b) has been prepared and structurally characterized; particularly, they have been found to be pre-catalysts for H₂ production from Cl₂CHCO₂H under CV conditions.

Anaerobic Formate and Hydrogen Metabolism

Numerous recent developments in the biochemistry, molecular biology, and physiology of formate and H2 metabolism and of the [NiFe]-hydrogenase (Hyd) cofactor biosynthetic machinery are highlighted. Formate export and import by the aquaporin-like pentameric formate channel FocA is governed by interaction with pyruvate formate-lyase, the enzyme that generates formate. Formate is disproportionated by the reversible formate hydrogenlyase (FHL) complex, which has been isolated, allowing biochemical dissection of evolutionary parallels with complex I of the respiratory chain. A recently identified sulfido-ligand attached to Mo in the active site of formate dehydrogenases led to the proposal of a modified catalytic mechanism. Structural analysis of the homologous, H2-oxidizing Hyd-1 and Hyd-5 identified a novel proximal [4Fe-3S] cluster in the small subunit involved in conferring oxygen tolerance to the enzymes. Synthesis of Salmonella Typhimurium Hyd-5 occurs aerobically, which is novel for an enterobacterial Hyd. The O2-sensitive Hyd-2 enzyme has been shown to be reversible: it presumably acts as a conformational proton pump in the H2-oxidizing mode and is capable of coupling reverse electron transport to drive H2 release. The structural characterization of all the Hyp maturation proteins has given new impulse to studies on the biosynthesis of the Fe(CN)2CO moiety of the [NiFe] cofactor. It is synthesized on a Hyp-scaffold complex, mainly comprising HypC and HypD, before insertion into the apo-large subunit. Finally, clear evidence now exists indicating that Escherichia coli can mature Hyd enzymes differentially, depending on metal ion availability and the prevailing metabolic state. Notably, Hyd-3 of the FHL complex takes precedence over the H2-oxidizing enzymes.

Synthetic advances inspired by the bioactive dinitrosyl iron unit

Resulting from biochemical iron-NO interactions, dinitrosyl iron complexes (DNICs) are small organometallic-like molecules, considered to serve as vehicles for NO transport and storage in vivo. Formed by the interaction of NO with cellular iron sulfur clusters or with the cellular labile iron pool, DNICs have been documented to be the largest NO-derived adduct in cells, even surpassing the well-known nitrosothiols (RSNOs). Continuing efforts in biological chemistry are aimed at understanding the movement of DNICs in and out of cells, and their important role in NO-induced iron efflux leading to apoptosis in cells. Intrigued by the integrity of the unique dinitrosyl iron unit (DNIU) and the possibility of roles for it in human physiology or medicinal applications, the understanding of fundamental properties such as ligand effects on its ability to switch between two redox levels has been pursued through biomimetic complexes. Using metallodithiolates and N-heterocyclic carbenes (NHCs) as ligands to Fe(NO)2, the synthesis of a library of novel DNICs, in both the oxidized, {Fe(NO)2}(9), and reduced, {Fe(NO)2}(10), forms (Enemark-Feltham notation), offers opportunity to examine structural, reactivity, and spectroscopic features. The raison d'etre for the MN2S2·Fe(NO)2 synthesis development is for the potential to exploit the ease of accessing two redox levels on two different metal sites, a property presumably required for achieving two electron redox processes in base metals. Hence such molecules may be viewed as synthetic analogues of [NiFe]- or [FeFe]-hydrogenase active sites in nature, both of which use bridging thiolates for connection of the two centers. A particular success was the development of an Fe(NO)N2S2·Fe(NO)2(+/0) redox pair for proton reduction electrocatalysis. Monomeric, reduced NHC-DNICs of the L2Fe(NO)2 type are synthesized via the Fe(CO)2(NO)2 precursor, and oxidized thiolate-containing forms are derived from the dimeric (μ-RS)2[Fe(NO)2]2. Monomeric NHC-DNICs are four coordinate, pseudotetrahedral compounds with planar Fe(NO)2 units in which the slightly bent Fe-NO groups are directed symmetrically inward at both redox levels. They serve as stable analogues of biological histidine binding sites. In agreement with IR data, Mössbauer spectroscopic parameters, and DFT computations, the prototypic NHC-DNICs indicate extensive delocalization of the electron density of iron via π-backbonding. Such π-delocalization presents an unusual reaction path for the one electron process of RS(-)/RSSR interconversion. Comparisons with imidazole-DNICs find NHCs to be the "better" ligands to Fe(NO)2 and prompted investigations in (a) possible relationships between such imidazole- and NHC-containing DNICs, (b) systems that might mimic the reactivity of DNICs with the endogenous gaseotransmitter CO, and (c) mechanistic details of such processes. In a broader context, these studies aim to further describe the behavior of the {Fe(NO)2} unit as a single molecular entity when subjected to various ligand environments and reaction conditions.

Synthetic Active Site Model of the [NiFeSe] Hydrogenase

A dinuclear synthetic model of the [NiFeSe] hydrogenase active site and a structural, spectroscopic and electrochemical analysis of this complex is reported. [NiFe(‘S₂Se₂’)(CO)₃] (H₂‘S₂Se₂’=1,2-bis(2-thiabutyl-3,3-dimethyl-4-selenol)benzene) has been synthesized by reacting the nickel selenolate complex [Ni(‘S₂Se₂’)] with [Fe(CO)₃bda] (bda=benzylideneacetone). X-ray crystal structure analysis confirms that [NiFe(‘S₂Se₂’)(CO)₃] mimics the key structural features of the enzyme active site, including a doubly bridged heterobimetallic nickel and iron center with a selenolate terminally coordinated to the nickel center. Comparison of [NiFe(‘S₂Se₂’)(CO)₃] with the previously reported thiolate analogue [NiFe(‘S₄’)(CO)₃] (H₂‘S₄’=H₂xbsms=1,2-bis(4-mercapto-3,3-dimethyl-2-thiabutyl)benzene) showed that the selenolate groups in [NiFe(‘S₂Se₂’)(CO)₃] give lower carbonyl stretching frequencies in the IR spectrum. Electrochemical studies of [NiFe(‘S₂Se₂’)(CO)₃] and [NiFe(‘S₄’)(CO)₃] demonstrated that both complexes do not operate as homogenous H₂ evolution catalysts, but are precursors to a solid deposit on an electrode surface for H₂ evolution catalysis in organic and aqueous solution.

[FeFe]- and [NiFe]-hydrogenase diversity, mechanism, and maturation

The [FeFe]- and [NiFe]-hydrogenases catalyze the formal interconversion between hydrogen and protons and electrons, possess characteristic non-protein ligands at their catalytic sites and thus share common mechanistic features. Despite the similarities between these two types of hydrogenases, they clearly have distinct evolutionary origins and likely emerged from different selective pressures. [FeFe]-hydrogenases are widely distributed in fermentative anaerobic microorganisms and likely evolved under selective pressure to couple hydrogen production to the recycling of electron carriers that accumulate during anaerobic metabolism. In contrast, many [NiFe]-hydrogenases catalyze hydrogen oxidation as part of energy metabolism and were likely key enzymes in early life and arguably represent the predecessors of modern respiratory metabolism. Although the reversible combination of protons and electrons to generate hydrogen gas is the simplest of chemical reactions, the [FeFe]- and [NiFe]-hydrogenases have distinct mechanisms and differ in the fundamental chemistry associated with proton transfer and control of electron flow that also help to define catalytic bias. A unifying feature of these enzymes is that hydrogen activation itself has been restricted to one solution involving diatomic ligands (carbon monoxide and cyanide) bound to an Fe ion. On the other hand, and quite remarkably, the biosynthetic mechanisms to produce these ligands are exclusive to each type of enzyme. Furthermore, these mechanisms represent two independent solutions to the formation of complex bioinorganic active sites for catalyzing the simplest of chemical reactions, reversible hydrogen oxidation. As such, the [FeFe]- and [NiFe]-hydrogenases are arguably the most profound case of convergent evolution. This article is part of a Special Issue entitled: Fe/S proteins: Analysis, structure, function, biogenesis and diseases.

HypD is the scaffold protein for Fe-(CN)2CO cofactor assembly in [NiFe]-hydrogenase maturation

[NiFe]-hydrogenases bind a NiFe-(CN)2CO cofactor in their catalytic large subunit. The iron-sulfur protein HypD and the small accessory protein HypC play a central role in the generation of the CO and CN(-) ligands. Infrared spectroscopy identified signatures on an anaerobically isolated HypCD complex that are reminiscent of those in the hydrogenase active site, suggesting that this complex is the assembly site of the Fe-(CN)2CO moiety of the cofactor prior to its transfer to the hydrogenase large subunit. Here, we report that HypD isolated in the absence of HypC shows infrared bands at 1956 cm(-1), 2072 cm(-1), and 2092 cm(-1) that can be assigned to CO, CN(1), and CN(2), respectively, and which are indistinguishable from those observed for the HypCD complex. HypC could not be isolated with CO or CN(-) ligand contribution. Treatment of HypD with EDTA led to the concomitant loss of Fe and the CO and CN(-) signatures, while oxidation by H2O2 resulted in a positive shift of the CO and CN(-) bands by 35 cm(-1) and 20 cm(-1), respectively, indicative of the ferrous iron as an immediate ligation site for the diatomic ligands. Analysis of HypD amino acid variants identified cysteines 41, 69, and 72 to be essential for maturation of the cofactor. We propose a refined model for the ligation of Fe-(CN)2CO to HypD and the role of HypC in [NiFe]-hydrogenase maturation.

IR-monitored photolysis of CO-inhibited nitrogenase: a major EPR-silent species with coupled terminal CO ligands

Fourier transform infrared spectroscopy (FTIR) was used to observe the photolysis and recombination of a new EPR-silent CO-inhibited form of α-H195Q nitrogenase from Azotobacter vinelandii. Photolysis at 4 K reveals a strong negative IR difference band at nu = 1938 cm(-1), along with a weaker negative feature at 1911 cm(-1). These bands and the associated chemical species have both been assigned the label "Hi-3". A positive band at nu = 1921 cm(-1) was assigned to the "Lo-3" photoproduct. By using an isotopic mixture of (12)C (16)O and (13)C (18)O, we show that the Hi-3 bands arise from coupling of two similar CO oscillators with one uncoupled frequency at approximately nu = 1917 cm(-1). Although in previous studies Lo-3 was not observed to recombine, by extending the observation range to 200-240 K, we found that recombination to Hi-3 does indeed occur, with an activation energy of approximately 6.5 kJ mol(-1). The frequencies of the Hi-3 bands suggest terminal CO ligation. This hypothesis was tested with DFT calculations on models with terminal CO ligands on Fe2 and Fe6 of the FeMo-cofactor. An S = 0 model with both CO ligands in exo positions predicts symmetric and asymmetric stretches at nu = 1938 and 1909 cm(-1), respectively, with relative band intensities of about 3.5:1, which is in good agreement with experiment. From the observed IR intensities, Hi-3 was found to be present at a concentration about equal to that of the EPR-active Hi-1 species. The relevance of Hi-3 to the nitrogenase catalytic mechanism and its recently discovered Fischer-Tropsch chemistry is discussed.

Model study of CO inhibition of [NiFe]hydrogenase

We propose a modified mechanism for the inhibition of [NiFe]hydrogenase ([NiFe]H(2)ase) by CO. We present a model study, using a NiRu H(2)ase mimic, that demonstrates that (i) CO completely inhibits the catalytic cycle of the model compound, (ii) CO prefers to coordinate to the Ru(II) center rather than taking an axial position on the Ni(II) center, and (iii) CO is unable to displace a hydrido ligand from the NiRu center. We combine these studies with a reevaluation of previous studies to propose that, under normal circumstances, CO inhibits [NiFe]H(2)ase by complexing to the Fe(II) center.

Photolysis of Hi-CO Nitrogenase - Observation of a Plethora of Distinct CO Species using Infrared Spectroscopy

Fourier transform infrared spectroscopy (FT-IR) was used to study the photochemistry of CO-inhibited Azotobacter vinelandii nitrogenase using visible light at cryogenic temperatures. The FT-IR difference spectrum of photolyzed hi-CO at 4 K comprises negative bands at 1973 cm^-1 and 1679 cm^-1 together with positive bands at 1711 cm^-1, 2135 and 2123 cm^-1. The negative bands are assigned to a hi-CO state that comprises 2 metal-bound CO ligands, one terminally bound, and one bridged and/or protonated species. The positive band at 1711 cm^-1 is assigned to a lo-CO product with a single bridged and/or protonated metal-CO group. We term these species 'Hi-1' and 'Lo-1' respectively. The high-energy bands are assigned to a liberated CO trapped in the protein pocket. Warming results in CO recombination, and the temperature dependence of the recombination rate yields an activation energy of 4 kJ mol^-1. Two α-H195 variant enzymes yielded additional signals. Asparagine substitution, α-H195N, gives a spectrum containing 2 negative 'Hi-2' bands at 1936 and 1858 cm^-1 with a positive 'Lo-2' band at 1780 cm^-1, while glutamine substitution, α-H195Q, produces a complex spectrum that includes a third CO species, with negative 'Hi-3' bands at 1938 and 1911 cm^-1 and a positive feature 'Lo-3' band at 1921 cm^-1. These species can be assigned to a combination of terminal, bridged, and possibly protonated CO groups bound to the FeMo-cofactor active site. The proposed structures are discussed in terms of both CO inhibition and the mechanism nitrogenase catalysis. Given the intractability of observing nitrogenase intermediates by crystallographic methods, IR-monitored photolysis appears to be a promising and information-rich probe of nitrogenase structure and chemistry.

The oxygen-tolerant hydrogenase I from Aquifex aeolicus weakly interacts with carbon monoxide: an electrochemical and time-resolved FTIR study

The [NiFe] hydrogenase (Hase I) involved in the aerobic respiration of the hyperthermophilic bacterium Aquifex aeolicus shows increased oxygen tolerance and thermostability and can form very stable films on pyrolytic graphite electrodes. Oxygen-tolerant enzymes, like the ones from A. aeolicus and Ralstonia eutropha, are reported to be insensitive to CO inhibition. This is in contrast to known and well-characterized (oxygen-sensitive) hydrogenases, for which carbon monoxide is a competitive inhibitor. In this study, the interaction of Hase I from A. aeolicus with CO is examined using in situ infrared electrochemistry and time-resolved FTIR spectroscopy. We could observe the formation of a CO adduct state, a finding that set the grounds to investigate the affinity of an O(2)-tolerant enzyme for binding CO as well as the reversibility of this process. In the case of A. aeolicus, this extrinsic CO is shown to be weakly attached and the adduct state is light-sensitive at low temperatures. The energetic parameters for the rebinding of CO at the active site were estimated from the rate constants of this process after photolysis and the results compared to those obtained for standard hydrogenases. Formation of a weak Ni-CO bond in the active site of Hase I most likely results from the different interaction of this enzyme with inhibitors and/or different active site electronic properties to which non standard amino acid residues in the vicinity of the active site might contribute.

The crystal structure of the [NiFe] hydrogenase from the photosynthetic bacterium Allochromatium vinosum: characterization of the oxidized enzyme (Ni-A state)

The crystal structure of the membrane-associated [NiFe] hydrogenase from Allochromatium vinosum has been determined to 2.1 Å resolution. Electron paramagnetic resonance (EPR) and Fourier transform infrared spectroscopy on dissolved crystals showed that it is present in the Ni-A state (>90%). The structure of the A. vinosum [NiFe] hydrogenase shows significant similarities with [NiFe] hydrogenase structures derived from Desulfovibrio species. The amino acid sequence identity is ∼ 50%. The bimetallic [NiFe] active site is located in the large subunit of the heterodimer and possesses three diatomic non-protein ligands coordinated to the Fe (two CN(-) , one CO). Ni is bound to the protein backbone via four cysteine thiolates; two of them also bridge the two metals. One of the bridging cysteines (Cys64) exhibits a modified thiolate in part of the sample. A mono-oxo bridging ligand was assigned between the metal ions of the catalytic center. This is in contrast to a proposal for Desulfovibrio sp. hydrogenases that show a di-oxo species in this position for the Ni-A state. The additional metal site located in the large subunit appears to be a Mg(2+) ion. Three iron-sulfur clusters were found in the small subunit that forms the electron transfer chain connecting the catalytic site with the molecular surface. The calculated anomalous Fourier map indicates a distorted proximal iron-sulfur cluster in part of the crystals. This altered proximal cluster is supposed to be paramagnetic and is exchange coupled to the Ni(3+) ion and the medial [Fe(3)S(4)](+) cluster that are both EPR active (S=1/2 species). This finding of a modified proximal cluster in the [NiFe] hydrogenase might explain the observation of split EPR signals that are occasionally detected in the oxidized state of membrane-bound [NiFe] hydrogenases as from A. vinosum.

Interaction of the active site of the Ni-Fe-Se hydrogenase from Desulfovibrio vulgaris Hildenborough with carbon monoxide and oxygen inhibitors

The study of Ni-Fe-Se hydrogenases is interesting from the basic research point of view because their active site is a clear example of how nature regulates the catalytic function of an enzyme by the change of a single residue, in this case a cysteine, which is replaced by a selenocysteine. Most hydrogenases are inhibited by CO and O(2). In this work we studied these inhibition processes for the Ni-Fe-Se hydrogenase from Desulfovibrio vulgaris Hildenborough by combining catalytic activity measurements, followed by mass spectrometry or chronoamperometry, with Fourier transform IR spectroscopy experiments. The results show that the CO inhibitor binds to Ni in both conformations of the active site of this hydrogenase in a way similar to that in standard Ni-Fe hydrogenases, although in one of the CO-inhibited conformations the active site of the Ni-Fe-Se hydrogenase is more protected against the attack by O(2). The inhibition of the Ni-Fe-Se hydrogenase activity by O(2) could be explained by oxidation of the terminal cysteine ligand of the active-site Ni, instead of the direct attack of O(2) on the bridging site between Ni and Fe.

A model for the CO-inhibited form of [NiFe] hydrogenase: synthesis of CO3Fe(micro-StBu)3Ni{SC6H3-2,6-(mesityl)2} and reversible CO addition at the Ni site

A [NiFe] hydrogenase model compound having a distorted trigonal-pyramidal nickel center, (CO)(3)Fe(micro-S(t)Bu)(3)Ni(SDmp), 1 (Dmp = C(6)H(3)-2,6-(mesityl)(2)), was synthesized from the reaction of the tetranuclear Fe-Ni-Ni-Fe complex [(CO)(3)Fe(micro-S(t)Bu)(3)Ni](2)(micro-Br)(2), 2 with NaSDmp at -40 degrees C. The nickel site of complex 1 was found to add CO or CN(t)Bu at -40 degrees C to give (CO)(3)Fe(S(t)Bu)(micro-S(t)Bu)(2)Ni(CO)(SDmp), 3, or (CO)(3)Fe(S(t)Bu)(micro-S(t)Bu)(2)Ni(CN(t)Bu)(SDmp), 4, respectively. One of the CO bands of 3, appearing at 2055 cm(-1) in the infrared spectrum, was assigned as the Ni-CO band, and this frequency is comparable to those observed for the CO-inhibited forms of [NiFe] hydrogenase. Like the CO-inhibited forms of [NiFe] hydrogenase, the coordination of CO at the nickel site of 1 is reversible, while the CN(t)Bu adduct 4 is more robust.

Dithiolate-bridged Fe-Ni-Fe trinuclear complexes consisting of Fe(CO)(3-n)(CN)(n) (n = 0, 1) components relevant to the active site of [NiFe] hydrogenase

A dithiolate-bridged Fe-Ni-Fe trinuclear carbonyl complex [(CO)(3)Fe(mu-ndt)Ni(mu-ndt)Fe(CO)(3)] (1, ndt = norbornane-exo-2,3-dithiolate) has been synthesized from the reaction of [Fe(CO)(4)I(2)] and Li(2)[Ni(ndt)(2)]. This reaction was found to occur with concomitant formation of a tetranuclear cluster [Ni(3)(mu-ndt)(4)FeI] (2). Treatment of 1 with Na[N(SiMe(3))(2)] transforms some of the CO ligands into CN(-), and the monocyanide complex (PPh(4))[(CO)(2)(CN)Fe(mu-ndt)Ni(mu-ndt)Fe(CO)(3)] (3) and the dicyanide complex (PPh(4))(2)[(CO)(2)(CN)Fe(mu-ndt)Ni(mu-ndt)Fe(CO)(2)(CN)] (4) were isolated. X-ray structural analyses of the trinuclear complexes revealed a Fe-Ni-Fe array in which the metal centers are connected by the ndt sulfur bridges and direct Fe-Ni bonds. Hydrogen bonding between the CN ligand in 3 and cocrystallized ethanol was found in the solid-state structure. The monocyanide complex 3 and dicyanide complex 4 reacted with acids such as HOTf or HCl generating insoluble materials, whereas complex 1 did not react.

Probing intermediates in the activation cycle of [NiFe] hydrogenase by infrared spectroscopy: the Ni-SIr state and its light sensitivity

The [NiFe] hydrogenase from the sulphate-reducing bacterium Desulfovibrio vulgaris Miyazaki F is reversibly inhibited in the presence of molecular oxygen. A key intermediate in the reactivation process, Ni-SI_r, provides the link between fully oxidized (Ni-A, Ni-B) and active (Ni-SI_a, Ni-C and Ni-R) forms of hydrogenase. In this work Ni-SI_r was found to be light-sensitive (T ≤ 110 K), similar to the active Ni-C and the CO-inhibited states. Transition to the final photoproduct state (Ni-SL) was shown to involve an additional transient light-induced state (Ni-SI₁₉₆₁). Rapid scan kinetic infrared measurements provided activation energies for the transition from Ni-SL to Ni-SI_r in protonated as well as in deuterated samples. The inhibitor CO was found not to react with the active site of the Ni-SL state. The wavelength dependence of the Ni-SI_r photoconversion was examined in the range between 410 and 680 nm. Light-induced effects were associated with a nickel-centred electronic transition, possibly involving a change in the spin state of nickel (Ni²⁺). In addition, at T ≤ 40 K the CN⁻ stretching vibrations of Ni-SL were found to be dependent on the colour of the monochromatic light used to irradiate the species, suggesting a change in the interaction of the hydrogen-bonding network of the surrounding amino acids. A possible mechanism for the photochemical process, involving displacement of the oxygen-based ligand, is discussed.

Carbon Monoxide and Cyanide Ligands in the Active Site of [FeFe]-Hydrogenases

The [FeFe]-hydrogenases, although share common features when compared to other metal containing hydrogenases, clearly have independent evolutionary origins. Examples of [FeFe]-hydrogenases have been characterized in detail by biochemical and spectroscopic approaches and the high resolution structures of two examples have been determined. The active site H-cluster is a complex bridged metal assembly in which a [4Fe-4S] cubane is bridged to a 2Fe subcluster with unique non-protein ligands including carbon monoxide, cyanide, and a five carbon dithiolate. Carbon monoxide and cyanide ligands as a component of a native active metal center is a property unique to the metal containing hydrogenases and there has been considerable attention to the characterization of the H-cluster at the level of electronic structure and mechanism as well as to defining the biological means to synthesize such a unique metal cluster. The chapter describes the structural architecture of [FeFe]-hydrogenases and key spectroscopic observations that have afforded the field with a fundamental basis for understanding the relationship between structure and reactivity of the H-cluster. In addition, the results and ideas concerning the topic of H-cluster biosynthesis as an emerging and fascinating area of research, effectively reinforcing the potential linkage between iron-sulfur biochemistry to the role of iron-sulfur minerals in prebiotic chemistry and the origin of life.

Structure and Function of [NiFe]-Hydrogenases

[NiFe(Se)]-hydrogenases are hetero-dimeric enzymes present in many microorganisms where they catalyze the oxidation of molecular hydrogen or the reduction of protons. Like the other two types of hydrogen-metabolizing enzymes, the [FeFe]- and [Fe]-hydrogenases, [NiFe]-hydrogenases have a Fe(CO)x unit in their active sites that is most likely involved in hydride binding. Because of their complexity, hydrogenases require a maturation machinery that involves several gene products. They include nickel and iron transport, synthesis of CN− (and maybe CO), formation and insertion of a FeCO(CN−)2 unit in the apo form, insertion of nickel and proteolytic cleavage of a C-terminal stretch, a step that ends the maturation process. Because the active site is buried in the structure, electron and proton transfer are required between this site and the molecular surface. The former is mediated by either three or one Fe/S cluster(s) depending on the enzyme. When exposed to oxidizing conditions, such as the presence of O2, [NiFe]-hydrogenases are inactivated. Depending on the redox state of the enzyme, exposure to oxygen results in either a partially reduced oxo species probably a (hydro)peroxo ligand between nickel and iron or a more reduced OH– ligand instead. Under some conditions the thiolates that coordinate the NiFe center can be modified to sulfenates. Understanding this process is of biotechnological interest for H2 production by photosynthetic organisms.

Thiolate-bridged dinuclear iron(tris-carbonyl)-nickel complexes relevant to the active site of [NiFe] hydrogenase

The reaction of NiBr(2)(EtOH)(4) with a 1:2-3 mixture of FeBr(2)(CO)(4) and Na(SPh) generated a linear trinuclear Fe-Ni-Fe cluster (CO)(3)Fe(mu-SPh)(3)Ni(mu-SPh)(3)Fe(CO)(3), 1, whereas the analogous reaction system FeBr(2)(CO)(4)/Na(S(t)Bu)/NiBr(2)(EtOH)(4) (1:2-3:1) gave rise to a linear tetranuclear Fe-Ni-Ni-Fe cluster [(CO)(3)Fe(mu-S(t)Bu)(3)Ni(mu-Br)](2), 2. By using this tetranuclear cluster 2 as the precursor, we have developed a new synthetic route to a series of thiolate-bridged dinuclear Fe(CO)(3)-Ni complexes, the structures of which mimic [NiFe] hydrogenase active sites. The reactions of 2 with SC(NMe(2))(2) (tmtu), Na{S(CH(2))(2)SMe} and ortho-NaS(C(6)H(4))SR (R = Me, (t)Bu) led to isolation of (CO)(3)Fe(mu-S(t)Bu)(3)NiBr(tmtu), 3, (CO)(3)Fe(S(t)Bu)(mu-S(t)Bu)(2)Ni{S(CH(2))(2)SMe}, 4, and (CO)(3)Fe(S(t)Bu)(mu-S(t)Bu)(2)Ni{S(C(6)H(4))SR}, 5a (R = Me) and 5b (R = (t)Bu), respectively. On the other hand, treatment of 2 with 2-methylthio-phenolate (ortho-O(C(6)H(4))SMe) in methanol resulted in (CO)(3)Fe(mu-S(t)Bu)(3)Ni(MeOH){O(C(6)H(4))SMe}, 6a. The methanol molecule bound to Ni is labile and is readily released under reduced pressure to afford (CO)(3)Fe(S(t)Bu)(mu-S(t)Bu)(2)Ni{O(C(6)H(4))SMe}, 6b, and the coordination geometry of nickel changes from octahedral to square planar. Likewise, the reaction of 2 with NaOAc in methanol followed by crystallization from THF gave (CO)(3)Fe(mu-S(t)Bu)(3)Ni(THF)(OAc), 7. The dinuclear complexes, 3-7, are thermally unstable, and a key to their successful isolation is to carry out the reactions and manipulations at -40 degrees C.