Local heterogeneity in the pressure denaturation of the coiled-coil tropomyosin because of subdomain folding units

High hydrostatic pressure induces slow contraction in mouse cardiomyocytes

Cardiomyocytes are contractile cells that regulate heart contraction. Ca2+ flux via Ca2+ channels activates actomyosin interactions, leading to cardiomyocyte contraction, which is modulated by physical factors (e.g., stretch, shear stress, and hydrostatic pressure). We evaluated the mechanism triggering slow contractions using a high-pressure microscope to characterize changes in cell morphology and intracellular Ca2+ concentration ([Ca2+]i) in mouse cardiomyocytes exposed to high hydrostatic pressures. We found that cardiomyocytes contracted slowly without an acute transient increase in [Ca2+]i, while a myosin ATPase inhibitor interrupted pressure-induced slow contractions. Furthermore, transmission electron microscopy showed that, although the sarcomere length was shortened upon the application of 20 MPa, this pressure did not collapse cellular structures such as the sarcolemma and sarcomeres. Our results suggest that pressure-induced slow contractions in cardiomyocytes are driven by the activation of actomyosin interactions without an acute transient increase in [Ca2+]i.

Water-mediated interactions destabilize proteins

Proteins are folded to avoid exposure of the nonpolar groups to water because water‐mediated interactions between nonpolar groups are a promising factor in the thermodynamic stabilities of proteins—which is a well‐accepted view as one of the unique effects of hydrophobic interactions. This article poses a critical question for this classical view by conducting an accurate solvation free‐energy calculation for a thermodynamic cycle of a protein folding using a liquid‐state density functional theory. Here, the solvation‐free energy for a leucine zipper formation was examined in the coiled‐coil protein GCN4‐p1, a typical model for hydrophobic interactions, which demonstrated that water‐mediated interactions were unfavorable for the association of nonpolar groups in the native state, while the dispersion forces between them were, instead, responsible for the association. Furthermore, the present analysis well predicted the isolated helical state stabilized by pressure, which was previously observed in an experiment. We reviewed the problems in the classical concept and semiempirical presumption that the energetic cost of the hydration of nonpolar groups is a driving force of folding.

High pressure macromolecular crystallography for structural biology: a review

In recent years, significant progress in high pressure macromolecular crystallography has been observed. It can be attributed both to the developments in experimental techniques, as well as to recognition of importance of high pressure protein studies in biochemistry and biophysics. The number of protein structures determined at pressure up to 1 GPa is growing. The unique advantages of this method can greatly improve the investigation of higher energy conformers of functional significance and our understanding of functionally important conformers, protein folding processes and the structural base of conformational diseases.

Identification of a unique "stability control region" that controls protein stability of tropomyosin: A two-stranded alpha-helical coiled-coil

Nine recombinant chicken skeletal alpha-tropomyosin proteins were prepared, eight C-terminal deletion constructs and the full length protein (1-81, 1-92, 1-99, 1-105, 1-110, 1-119, 1-131, 1-260 and 1-284) and characterized by circular dichroism spectroscopy and analytical ultracentrifugation. We identified for the first time, a stability control region between residues 97 and 118. Fragments of tropomyosin lacking this region (1-81, 1-92, and 1-99) still fold into two-stranded alpha-helical coiled-coils but are significantly less stable (T(m) between 26-28.5 degrees C) than longer fragments containing this region (1-119, 1-131, 1-260 and 1-284) which show a large increase in their thermal midpoints (T(m) 40-43 degrees C) for a DeltaT(m) of 16-18 degrees C between 1-99 and 1-119. We further investigated two additional fragments that ended between residues 99 and 119, that is fragments 1-105 and 1-110. These fragments were more stable than 1-99 and less stable than 1-119, and showed that there were three separate sites that synergistically contribute to the large jump in protein stability (electrostatic clusters 97-104 and 112-118, and a hydrophobic interaction from Leu 110). All the residues involved in these stabilizing interactions are located outside the hydrophobic core a and d positions that have been shown to be the major contributor to coiled-coil stability. Our results show clearly that protein stability is more complex than previously thought and unique sites can synergistically control protein stability over long distances.

Folding and stability of a coiled-coil investigated using chemical and physical denaturing agents: comparative analysis of polymerized and non-polymerized forms of alpha-tropomyosin

alpha-Tropomyosin (Tm) is a two-stranded alpha-helical coiled-coil protein, which participates in the regulation of muscle contraction. Unlike Tm purified from vertebrate muscle, recombinant Tm expressed in Escherichia coli is not acetylated at the N-terminal residue and loses the capacity to undergo head-to-tail polymerization, to bind actin and to inhibit actomyosin ATPase activity. These functions are restored by fusion of an N-terminal Ala-Ser (AS) dipeptide tail to recombinant Tm. Here, we have employed chemical (guanidine hydrochloride and urea) and physical (elevated hydrostatic pressures and low temperatures) denaturing agents to compare the structural stabilities of polymeric alanine-serine-tropomyosin (ASTm, containing the AS dipeptide) and dimeric "non-fusion" Tm (nfTm, i.e., not containing the AS dipeptide). Binding of the hydrophobic fluorescent dye bis-ANS, circular dichroism and size-exclusion chromatography were used to monitor the stabilities and state of association of both proteins under different solution conditions. Bis-ANS binding was markedly decreased at low concentrations (<1M) of GdnHCl or urea, whereas the secondary structures of both ASTm and nfTm were essentially unaffected in the same range of denaturant concentrations. These results suggest local unfolding of bis-ANS binding domains prior to global unfolding of Tm. In contrast, increased bis-ANS binding was observed when Tm was submitted to high pressures or to low temperatures, implying increased exposure of hydrophobic domains in the protein. Taken together, the different sensitivities of ASTm and nfTm to different denaturing agents support the notion that, at close to physiological conditions, head-to-tail interactions in polymerized ASTm are predominantly stabilized by electrostatic interactions between adjacent Tm dimers, whereas non-polar interactions appear to play a major role in the stability of the coiled-coil structure of individual Tm dimers.

Stabilization of partially folded states in protein folding/misfolding transitions by hydrostatic pressure

In the last few years, hydrostatic pressure has been extensively used in the study of both protein folding and misfolding/aggregation. Compared to other chemical or physical denaturing agents, a unique feature of pressure is its ability to induce subtle changes in protein conformation, which allow the stabilization of partially folded intermediate states that are usually not significantly populated under more drastic conditions (e.g., in the presence of chemical denaturants or at high temperatures). Much of the recent research in the field of protein folding has focused on the characterization of folding intermediates since these species appear to be involved in a variety of disease-causing protein misfolding and aggregation events. The exact mechanisms of these biological phenomena, however, are still poorly understood. Here, we review recent examples of the use of hydrostatic pressure as a tool to obtain insight into the forces and energetics governing the productive folding or the misfolding and aggregation of proteins.

Effects of cardiomyopathic mutations on the biochemical and biophysical properties of the human alpha-tropomyosin

Mutations in the protein alpha-tropomyosin (Tm) can cause a disease known as familial hypertrophic cardiomyopathy. In order to understand how such mutations lead to protein dysfunction, three point mutations were introduced into cDNA encoding the human skeletal tropomyosin, and the recombinant Tms were produced at high levels in the yeast Pichia pastoris. Two mutations (A63V and K70T) were located in the N-terminal region of Tm and one (E180G) was located close to the calcium-dependent troponin T binding domain. The functional and structural properties of the mutant Tms were compared to those of the wild type protein. None of the mutations altered the head-to-tail polymerization, although slightly higher actin binding was observed in the mutant Tm K70T, as demonstrated in a cosedimentation assay. The mutations also did not change the cooperativity of the thin filament activation by increasing the concentrations of Ca2+. However, in the absence of troponin, all mutant Tms were less effective than the wild type in regulating the actomyosin subfragment 1 Mg2+ ATPase activity. Circular dichroism spectroscopy revealed no differences in the secondary structure of the Tms. However, the thermally induced unfolding, as monitored by circular dichroism or differential scanning calorimetry, demonstrated that the mutants were less stable than the wild type. These results indicate that the main effect of the mutations is related to the overall stability of Tm as a whole, and that the mutations have only minor effects on the cooperative interactions among proteins that constitute the thin filament.

Defining the minimum size of a hydrophobic cluster in two-stranded alpha-helical coiled-coils: effects on protein stability

The alpha-helical coiled-coil motif is characterized by a heptad repeat pattern (abcdefg)(n) in which residues a and d form the hydrophobic core. Long coiled-coils (e.g., tropomyosin, 284 residues per polypeptide chain) typically do not have a continuous hydrophobic core of stabilizing residues, but rather one that consists of alternating clusters of stabilizing and destabilizing residues. We have arbitrarily defined a cluster as a minimum of three consecutive stabilizing or destabilizing residues in the hydrophobic core. We report here on a series of two-stranded, disulfide-bridged parallel alpha-helical coiled-coils that contain a central cassette of three consecutive hydrophobic core positions (d, a, and d) with a destabilizing cluster of three consecutive Ala residues in the hydrophobic core on each side of the cassette. The effect of adding one to three stabilizing hydrophobes in these positions (Leu or Ile; denoted as [see text]) was investigated. Alanine residues (denoted as [see text]) are used to represent destabilizing residues. The peptide with three Ala residues in the d a d cassette positions ([see text]) was among the least stable coiled-coil (T(m) = 39.3 degrees C and Urea(1/2) = 1.9 M). Surprisingly, the addition of one stabilizing hydrophobe (Leu) to the cassette or two stabilizing hydrophobes (Leu), still interspersed by an Ala in the cassette ([see text]), also did not lead to any gain in stability. However, peptides with two adjacent hydrophobes in the cassette ([see text])([see text]) did show a gain in stability of 0.9 kcal/mole over the peptide with two interspersed hydrophobes ([see text]). Because the latter three peptides have the same inherent hydrophobicity, the juxtaposition of stabilizing hydrophobes leads to a synergistic effect, and thus a clustering effect. The addition of a third stabilizing hydrophobe to the cassette ([see text]) resulted in a further synergistic gain in stability of 1.7 kcal/mole (T(m) = 54.1 degrees C and Urea(1/2) = 3.3M). Therefore, the role of hydrophobicity in the hydrophobic core of coiled-coils is extremely context dependent and clustering is an important aspect of protein folding and stability.

Kinetics of the dimerization of retroviral proteases: the "fireman's grip" and dimerization

All retroviral proteases belong to the family of aspartic proteases. They are active as homodimers, each unit contributing one catalytic aspartate to the active site dyad. An important feature of all aspartic proteases is a conserved complex scaffold of hydrogen bonds supporting the active site, called the "fireman's grip," which involves the hydroxyl groups of two threonine (serine) residues in the active site Asp-Thr(Ser)-Gly triplets. It was shown previously that the fireman's grip is indispensable for the dimer stability of HIV protease. The retroviral proteases harboring Ser in their active site triplet are less active and, under natural conditions, are expressed in higher enzyme/substrate ratio than those having Asp-Thr-Gly triplet. To analyze whether this observation can be attributed to the different influence of Thr or Ser on dimerization, we prepared two pairs of the wild-type and mutant proteases from HIV and myeloblastosis-associated virus harboring either Ser or Thr in their Asp-Thr(Ser)-Gly triplet. The equilibrium dimerization constants differed by an order of magnitude within the relevant pairs. The proteases with Thr in their active site triplets were found to be approximately 10 times more thermodynamically stable. The dimer association contributes to this difference more than does the dissociation. We propose that the fireman's grip might be important in the initial phases of dimer formation to help properly orientate the two subunits of a retroviral protease. The methyl group of threonine might contribute significantly to fixing such an intermediate conformation.

Stabilizing and Destabilizing Clusters in the Hydrophobic Core of Long Two-stranded α-Helical Coiled-coils

Detailed sequence analyses of the hydrophobic core residues of two long two-stranded alpha-helical coiled-coils that differ dramatically in sequence, function, and length were performed (tropomyosin of 284 residues and the coiled-coil domain of the myosin rod of 1086 residues). Three types of regions were present in the hydrophobic core of both proteins: stabilizing clusters and destabilizing clusters, defined as three or more consecutive core residues of either stabilizing (Leu, Ile, Val, Met, Phe, and Tyr) or destabilizing (Gly, Ala, Cys, Ser, Thr, Asn, Gln, Asp, Glu, His, Arg, Lys, and Trp) residues, and intervening regions that consist of both stabilizing and destabilizing residues in the hydrophobic core but no clusters. Subsequently, we designed a series of two-stranded coiled-coils to determine what defines a destabilizing cluster and varied the length of the destabilizing cluster from 3 to 7 residues to determine the length effect of the destabilizing cluster on protein stability. The results showed a dramatic destabilization, caused by a single Leu to Ala substitution, on formation of a 3-residue destabilizing cluster (DeltaT(m) of 17-21 degrees C) regardless of the stability of the coiled-coil. Any further substitution of Leu to Ala that increased the size of the destabilizing cluster to 5 or 7 hydrophobic core residues in length had little effect on stability (DeltaT(m) of 1.4-2.8 degrees C). These results suggested that the contribution of Leu to protein stability is context-dependent on whether the hydrophobe is in a stabilizing cluster or its proximity to neighboring destabilizing and stabilizing clusters.

Cardiomyopathic tropomyosin mutations that increase thin filament Ca2+ sensitivity and tropomyosin N-domain flexibility

The relationship between tropomyosin thermal stability and thin filament activation was explored using two N-domain mutants of alpha-striated muscle tropomyosin, A63V and K70T, each previously implicated in familial hypertrophic cardiomyopathy. Both mutations had prominent effects on tropomyosin thermal stability as monitored by circular dichroism. Wild type tropomyosin unfolded in two transitions, separated by 10 degrees C. The A63V and K70T mutations decreased the melting temperature of the more stable of these transitions by 4 and 10 degrees C, respectively, indicating destabilization of the N-domain in both cases. Global analysis of all three proteins indicated that the tropomyosin N-domain and C-domain fold with a cooperative free energy of 1.0-1.5 kcal/mol. The two mutations increased the apparent affinity of the regulatory Ca2+ binding sites of thin filament in two settings: Ca2+-dependent sliding speed of unloaded thin filaments in vitro (at both pH 7.4 and 6.3), and Ca2+ activation of the thin filament-myosin S1 ATPase rate. Neither mutation had more than small effects on the maximal ATPase rate in the presence of saturating Ca2+ or on the maximal sliding speed. Despite the increased tropomyosin flexibility implied by destabilization of the N-domain, neither the cooperativity of thin filament activation by Ca2+ nor the cooperative binding of myosin S1-ADP to the thin filament was altered by the mutations. The combined results suggest that a more dynamic tropomyosin N-domain influences interactions with actin and/or troponin that modulate Ca2+ sensitivity, but has an unexpectedly small effect on cooperative changes in tropomyosin position on actin.

Clustering of large hydrophobes in the hydrophobic core of two-stranded alpha-helical coiled-coils controls protein folding and stability

The de novo design and biophysical characterization of two 60-residue peptides that dimerize to fold as parallel coiled-coils with different hydrophobic core clustering is described. Our goal was to investigate whether designing coiled-coils with identical hydrophobicity but with different hydrophobic clustering of non-polar core residues (each contained 6 Leu, 3 Ile, and 7 Ala residues in the hydrophobic core) would affect helical content and protein stability. The disulfide-bridged P3 and P2 differed dramatically in alpha-helical structure in benign conditions. P3 with three hydrophobic clusters was 98% alpha-helical, whereas P2 was only 65% alpha-helical. The stability profiles of these two analogs were compared, and the enthalpy and heat capacity changes upon denaturation were determined by measuring the temperature dependence by circular dichroism spectroscopy and confirmed by differential scanning calorimetry. The results showed that P3 assembled into a stable alpha-helical two-stranded coiled-coil and exhibited a native protein-like cooperative two-state transition in thermal melting, chemical denaturation, and calorimetry experiments. Although both peptides have identical inherent hydrophobicity (the hydrophobic burial of identical non-polar residues in equivalent heptad coiled-coil positions), we found that the context dependence of an additional hydrophobic cluster dramatically increased stability of P3 (Delta Tm approximately equal to 18 degrees C and Delta[urea](1/2) approximately equal to 1.5 M) as compared with P2. These results suggested that hydrophobic clustering significantly stabilized the coiled-coil structure and may explain how long fibrous proteins like tropomyosin maintain chain integrity while accommodating polar or charged residues in regions of the protein hydrophobic core.

Specific sequences determine the stability and cooperativity of folding of the C-terminal half of tropomyosin

Tropomyosin is a flexible 410 A coiled-coil protein in which the relative stabilities of specific regions may be important for its proper function in the control of muscle contraction. In addition, tropomyosin can be used as a simple model of natural occurrence to understand the inter- and intramolecular interactions that govern the stability of coiled-coils. We have produced eight recombinant tropomyosin fragments (Tm(143-284(5OHW),) Tm(189-284(5OHW)), Tm(189-284), Tm(220-284(5OHW)), Tm(220-284), Tm(143-235), Tm(167-260), and Tm(143-260)) and one synthetic peptide (Ac-Tm(215-235)) to investigate the relative conformational stability of different regions derived from the C-terminal region of the protein, which is known to interact with the troponin complex. Analytical ultracentrifugation experiments show that the fragments that include the last 24 residues of the molecule (Tm(143-284(5OHW)), Tm(189-284(5OHW)), Tm(220-284(5OHW)), Tm(220-284)) are completely dimerized at 10 microm dimer (50 mm phosphate, 100 mm NaCl, 1.0 mm dithiothreitol, and 0.5 mm EDTA, 10 degrees C), whereas fragments that lack the native C terminus (Tm(143-235),Tm(167-260), and Tm(143-260)) are in a monomer-dimer equilibrium under these conditions. The presence of trifluoroethanol resulted in a reduction in the [theta](222)/[theta](208) circular dichroism ratio in all of the fragments and induced stable trimer formation only in those containing residues 261-284. Urea denaturation monitored by circular dichroism and fluorescence revealed that residues 261-284 of tropomyosin are very important for the stability of the C-terminal half of the molecule as a whole. Furthermore, the absence of this region greatly increases the cooperativity of urea-induced unfolding. Temperature and urea denaturation experiments show that Tm(143-235) is less stable than other fragments of the same size. We have identified a number of factors that may contribute to this particular instability, including an interhelix repulsion between g and e' positions of the heptad repeat, a charged residue at the hydrophobic coiled-coil interface, and a greater fraction of beta-branched residues located at d positions.

Pressure induces folding intermediates that are crucial for protein-DNA recognition and virus assembly

Protein-nucleic acid interactions are crucial for a variety of fundamental biological processes such as replication, transcription, restriction, translation and virus assembly. The molecular basis of protein-DNA and protein-RNA recognition is deeply related to the thermodynamics of the systems. We review here how protein-nucleic acid interactions can be approached in the same way as protein-protein interactions involved in protein folding and protein assembly, using hydrostatic pressure as the primary tool and employing several spectroscopic techniques, especially fluorescence, circular dichroism and high-resolution nuclear magnetic resonance. High pressure has the unique property of stabilizing partially folded states or molten-globule states of a protein. The competition between correct folding and misfolding, which in many proteins leads to formation of insoluble aggregates is an important problem in the biotechnology industry and in human diseases such as amyloidosis, Alzheimer's, prion and tumor diseases. The pressure studies reveal that a gradient of partially folded (molten globule) conformations is present between the unfolded and fully folded structure of several bacteria, plant and mammalian viruses. Using pressure, we have detected the presence of a ribonucleoprotein intermediate, where the coat protein is partially unfolded but bound to RNA. These intermediates are potential targets for antiviral compounds. Pressure studies on viruses have direct biotechnological applications. The ability of pressure to inactivate viruses has been evaluated with a view toward the applications of vaccine development and virus sterilization. Recent studies demonstrate that pressure causes virus inactivation while preserving the immunogenic properties. There is substantial evidence that a high-pressure cycle traps a virus in the 'fusion intermediate state', not infectious but highly immunogenic.

Pressure provides new insights into protein folding, dynamics and structure

Hydrostatic pressure is a powerful tool for studying protein folding, and the dynamics and structure of folding intermediates. Recently, pressure techniques have opened two important fronts to aid our understanding of how polypeptides fold into highly structured conformations. The first advance is the stabilization of folding intermediates, making it possible to characterize their structures and dynamics by different methodologies. Kinetic studies under pressure constitute the second advance, promising detailed appraisal and understanding of protein folding landscapes. The combination of these two approaches enables dissection of the roles of packing and cavities in folding, and in assembly of multimolecular structures such as protein-DNA complexes and viruses. The study of aggregates and amyloids, derived from partially folded intermediates at the junction between productive and off-pathway folding, have also been studied, promising better understanding of diseases associated with protein misfolding.