Kinetic models of translocation, head-on collision, and DNA cleavage by type I restriction endonucleases

G, Farnaz AF, Pannafino G, Chen JJ, Ajith VP, Momoh S, Scotland M, Raghavan V, Manhart CM, Shinohara A, Nishant KT, Alani E. Exo1 protects DNA nicks from ligation to promote crossover formation during meiosis

In most sexually reproducing organisms crossing over between chromosome homologs during meiosis is essential to produce haploid gametes. Most crossovers that form in meiosis in budding yeast result from the biased resolution of double Holliday junction (dHJ) intermediates. This dHJ resolution step involves the actions of Rad2/XPG family nuclease Exo1 and the Mlh1-Mlh3 mismatch repair endonuclease. Here, we provide genetic evidence in baker's yeast that Exo1 promotes meiotic crossing over by protecting DNA nicks from ligation. We found that structural elements in Exo1 that interact with DNA, such as those required for the bending of DNA during nick/flap recognition, are critical for its role in crossing over. Consistent with these observations, meiotic expression of the Rad2/XPG family member Rad27 partially rescued the crossover defect in exo1 null mutants, and meiotic overexpression of Cdc9 ligase reduced the crossover levels of exo1 DNA-binding mutants to levels that approached the exo1 null. In addition, our work identified a role for Exo1 in crossover interference. Together, these studies provide experimental evidence for Exo1-protected nicks being critical for the formation of meiotic crossovers and their distribution.

ENDO-Pore: high-throughput linked-end mapping of single DNA cleavage events using nanopore sequencing

Mapping the precise position of DNA cleavage events plays a key role in determining the mechanism and function of endonucleases. ENDO-Pore is a high-throughput nanopore-based method that allows the time resolved mapping single molecule DNA cleavage events in vitro. Following linearisation of a circular DNA substrate by the endonuclease, a resistance cassette is ligated recording the position of the cleavage event. A library of single cleavage events is constructed and subjected to rolling circle amplification to generate concatemers. These are sequenced and used to produce accurate consensus sequences. To identify the cleavage site(s), we developed CSI (Cleavage Site Investigator). CSI recognizes the ends of the cassette ligated into the cleaved substrate and triangulates the position of the dsDNA break. We firstly benchmarked ENDO-Pore using Type II restriction endonucleases. Secondly, we analysed the effect of crRNA length on the cleavage pattern of CRISPR Cas12a. Finally, we mapped the time-resolved DNA cleavage by the Type ISP restriction endonuclease LlaGI that introduces random double-strand breaks into its DNA substrates.

Molecular motor translocation kinetics: Application of Monte Carlo computer simulations to determine microscopic kinetic parameters

Methods for studying the translocation of motor proteins along a filament (e.g., nucleic acid and polypeptide) typically monitor the total production of ADP, the arrival/departure of the motor protein at/from a particular location (often one end of the filament), or the dissociation of the motor protein from the filament. The associated kinetic time courses are often analyzed using a simple sequential uniform n-step mechanism to estimate the macroscopic kinetic parameters (e.g., translocation rate and processivity) and the microscopic kinetic parameters (e.g., kinetic step-size and the rate constant for the rate-limiting step). These sequential uniform n-step mechanisms assume repetition of uniform and irreversible rate-limiting steps of forward motion along the filament. In order to determine how the presence of non-uniform motion (e.g., backward motion, random pauses, or jumping) affects the estimates of parameters obtained from such analyses, we evaluated computer simulated translocation time courses containing non-uniform motion using a simple sequential uniform n-step model. By comparing the kinetic parameters estimated from the analysis of the data generated by these simulations with the input parameters of the simulations, we were able to determine which of the kinetic parameters were likely to be over/under estimated due to non-uniform motion of the motor protein.

Mapping DNA cleavage by the Type ISP restriction-modification enzymes following long-range communication between DNA sites in different orientations

The prokaryotic Type ISP restriction-modification enzymes are single-chain proteins comprising an Mrr-family nuclease, a superfamily 2 helicase-like ATPase, a coupler domain, a methyltransferase, and a DNA-recognition domain. Upon recognising an unmodified DNA target site, the helicase-like domain hydrolyzes ATP to cause site release (remodeling activity) and to then drive downstream translocation consuming 1-2 ATP per base pair (motor activity). On an invading foreign DNA, double-strand breaks are introduced at random wherever two translocating enzymes form a so-called collision complex following long-range communication between a pair of target sites in inverted (head-to-head) repeat. Paradoxically, structural models for collision suggest that the nuclease domains are too far apart (>30 bp) to dimerise and produce a double-strand DNA break using just two strand-cleavage events. Here, we examined the organisation of different collision complexes and how these lead to nuclease activation. We mapped DNA cleavage when a translocating enzyme collides with a static enzyme bound to its site. By following communication between sites in both head-to-head and head-to-tail orientations, we could show that motor activity leads to activation of the nuclease domains via distant interactions of the helicase or MTase-TRD. Direct nuclease dimerization is not required. To help explain the observed cleavage patterns, we also used exonuclease footprinting to demonstrate that individual Type ISP domains can swing off the DNA. This study lends further support to a model where DNA breaks are generated by multiple random nicks due to mobility of a collision complex with an overall DNA-binding footprint of ∼30 bp.

All motors have to decide is what to do with the DNA that is given them

DNA translocases are a diverse group of molecular motors responsible for a wide variety of cellular functions. The goal of this review is to identify common aspects in the mechanisms for how these enzymes couple the binding and hydrolysis of ATP to their movement along DNA. Not surprisingly, the shared structural components contained within the catalytic domains of several of these motors appear to give rise to common aspects of DNA translocation. Perhaps more interesting, however, are the differences between the families of translocases and the potential associated implications both for the functions of the members of these families and for the evolution of these families. However, as there are few translocases for which complete characterizations of the mechanisms of DNA binding, DNA translocation, and DNA-stimulated ATPase have been completed, it is difficult to form many inferences. We therefore hope that this review motivates the necessary further experimentation required for broader comparisons and conclusions.

The Type ISP Restriction-Modification enzymes LlaBIII and LlaGI use a translocation-collision mechanism to cleave non-specific DNA distant from their recognition sites

The Type ISP Restriction–Modification (RM) enzyme LlaBIII is encoded on plasmid pJW566 and can protect Lactococcus lactis strains against bacteriophage infections in milk fermentations. It is a single polypeptide RM enzyme comprising Mrr endonuclease, DNA helicase, adenine methyltransferase and target-recognition domains. LlaBIII shares >95% amino acid sequence homology across its first three protein domains with the Type ISP enzyme LlaGI. Here, we determine the recognition sequence of LlaBIII (5′-TnAGCC-3′, where the adenine complementary to the underlined base is methylated), and characterize its enzyme activities. LlaBIII shares key enzymatic features with LlaGI; namely, adenosine triphosphate-dependent DNA translocation (∼309 bp/s at 25°C) and a requirement for DNA cleavage of two recognition sites in an inverted head-to-head repeat. However, LlaBIII requires K⁺ ions to prevent non-specific DNA cleavage, conditions which affect the translocation and cleavage properties of LlaGI. By identifying the locations of the non-specific dsDNA breaks introduced by LlaGI or LlaBIII under different buffer conditions, we validate that the Type ISP RM enzymes use a common translocation–collision mechanism to trigger endonuclease activity. In their favoured in vitro buffer, both LlaGI and LlaBIII produce a normal distribution of random cleavage loci centred midway between the sites. In contrast, LlaGI in K⁺ ions produces a far more distributive cleavage profile.

Superfamily 2 helicases

Superfamily 2 helicases are involved in all aspects of RNA metabolism, and many steps in DNA metabolism. This review focuses on the basic mechanistic, structural and biological properties of each of the families of helicases within superfamily 2. There are ten separate families of helicases within superfamily 2, each playing specific roles in nucleic acid metabolism. The mechanisms of action are diverse, as well as the effect on the nucleic acid. Some families translocate on single-stranded nucleic acid and unwind duplexes, some unwind double-stranded nucleic acids without translocation, and some translocate on double-stranded or single-stranded nucleic acids without unwinding.

Fluorescence methods to study DNA translocation and unwinding kinetics by nucleic acid motors

Translocation of nucleic acid motor proteins (translocases) along linear nucleic acids can be studied by monitoring either the time course of the arrival of the motor protein at one end of the nucleic acid or the kinetics of ATP hydrolysis by the motor protein during translocation using pre-steady state ensemble kinetic methods in a stopped-flow instrument. Similarly, the unwinding of double-stranded DNA or RNA by helicases can be studied in ensemble experiments by monitoring either the kinetics of the conversion of the double-stranded nucleic acid into its complementary single strands by the helicase or the kinetics of ATP hydrolysis by the helicase during unwinding. Such experiments monitor translocation of the enzyme along or unwinding of a series of nucleic acids labeled at one position (usually the end) with a fluorophore or a pair of fluorophores that undergo changes in fluorescence intensity or efficiency of fluorescence resonance energy transfer (FRET). We discuss how the pre-steady state kinetic data collected in these ensemble experiments can be analyzed by simultaneous global nonlinear least squares (NLLS) analysis using simple sequential "n-step" mechanisms to obtain estimates of the macroscopic rates and processivities of translocation and/or unwinding, the rate-limiting step(s) in these mechanisms, the average "kinetic step-size," and the stoichiometry of coupling ATP binding and hydrolysis to movement along the nucleic acid.

The phasevarion: phase variation of type III DNA methyltransferases controls coordinated switching in multiple genes

In several host-adapted pathogens, phase variation has been found to occur in genes that encode methyltransferases associated with type III restriction-modification systems. It was recently shown that in the human pathogens Haemophilus influenzae, Neisseria gonorrhoeae and Neisseria meningitidis phase variation of a type III DNA methyltransferase, encoded by members of the mod gene family, regulates the expression of multiple genes. This novel genetic system has been termed the 'phasevarion' (phase-variable regulon). The wide distribution of phase-variable mod family genes indicates that this may be a common strategy used by host-adapted bacterial pathogens to randomly switch between distinct cell types.

The single polypeptide restriction-modification enzyme LlaGI is a self-contained molecular motor that translocates DNA loops

To cleave DNA, the single polypeptide restriction–modification enzyme LlaGI must communicate between a pair of indirectly repeated recognition sites. We demonstrate that this communication occurs by a 1-dimensional route, namely unidirectional dsDNA loop translocation rightward of the specific recognition sequence 5′-CTnGAyG-3′ as written (where n is either A, G, C or T and y is either C or T). Motion across thousands of base pairs is catalysed by the helicase domain and requires the hydrolysis of 1.5-2 ATP per base pair. DNA loop extrusion is accompanied by changes in DNA twist consistent with the motor following the helical pitch of the polynucleotide track. LlaGI is therefore an example of a polypeptide that is a completely self-contained, multi-functional molecular machine.

DNA cleavage and methylation specificity of the single polypeptide restriction-modification enzyme LlaGI

LlaGI is a single polypeptide restriction-modification enzyme encoded on the naturally-occurring plasmid pEW104 isolated from Lactococcus lactis ssp. cremoris W10. Bioinformatics analysis suggests that the enzyme contains domains characteristic of an mrr endonuclease, a superfamily 2 DNA helicase and a gamma-family adenine methyltransferase. LlaGI was expressed and purified from a recombinant clone and its properties characterised. An asymmetric recognition sequence was identified, 5'-CTnGAyG-3' (where n is A, G, C or T and y is C or T). Methylation of the recognition site occurred on only one strand (the non-degenerate dA residue of 5'-CrTCnAG-3' being methylated at the N6 position). Double strand DNA breaks at distant, random sites were only observed when two head-to-head oriented, unmethylated copies of the site were present; single sites or pairs in tail-to-tail or head-to-tail repeat only supported a DNA nicking activity. dsDNA nuclease activity was dependent upon the presence of ATP or dATP. Our results are consistent with a directional long-range communication mechanism that is necessitated by the partial site methylation. In the accompanying manuscript [Smith et al. (2009) The single polypeptide restriction-modification enzyme LlaGI is a self-contained molecular motor that translocates DNA loops], we demonstrate that this communication is via 1-dimensional DNA loop translocation. On the basis of this data and that in the third accompanying manuscript [Smith et al. (2009) An Mrr-family nuclease motif in the single polypeptide restriction-modification enzyme LlaGI], we propose that LlaGI is the prototype of a new sub-classification of Restriction-Modification enzymes, named Type I SP (for Single Polypeptide).

Kinetics of motor protein translocation on single-stranded DNA

The translocation of nucleic acid motor proteins along DNA or RNA can be studied in ensemble experiments by monitoring either the kinetics of the arrival of the protein at a specific site on the nucleic acid filament (generally one end of the filament) or the kinetics of ATP hydrolysis by the motor protein during translocation. The pre-steady state kinetic data collected in ensemble experiments can be analyzed by simultaneous global non-linear least squares (NLLS) analysis using a simple sequential "n-step" mechanism to obtain estimates of the rate-limiting step(s) in the translocation cycle, the average "kinetic step-size," and the efficiency of coupling ATP binding and hydrolysis to translocation.

RecBCD enzyme and the repair of double-stranded DNA breaks

The RecBCD enzyme of Escherichia coli is a helicase-nuclease that initiates the repair of double-stranded DNA breaks by homologous recombination. It also degrades linear double-stranded DNA, protecting the bacteria from phages and extraneous chromosomal DNA. The RecBCD enzyme is, however, regulated by a cis-acting DNA sequence known as Chi (crossover hotspot instigator) that activates its recombination-promoting functions. Interaction with Chi causes an attenuation of the RecBCD enzyme's vigorous nuclease activity, switches the polarity of the attenuated nuclease activity to the 5' strand, changes the operation of its motor subunits, and instructs the enzyme to begin loading the RecA protein onto the resultant Chi-containing single-stranded DNA. This enzyme is a prototypical example of a molecular machine: the protein architecture incorporates several autonomous functional domains that interact with each other to produce a complex, sequence-regulated, DNA-processing machine. In this review, we discuss the biochemical mechanism of the RecBCD enzyme with particular emphasis on new developments relating to the enzyme's structure and DNA translocation mechanism.

A RecB-family nuclease motif in the Type I restriction endonuclease EcoR124I

The Type I restriction-modification enzyme EcoR124I is an ATP-dependent endonuclease that uses dsDNA translocation to locate and cleave distant non-specific DNA sites. Bioinformatic analysis of the HsdR subunits of EcoR124I and related Type I enzymes showed that in addition to the principal PD-(E/D)xK Motifs, I, II and III, a QxxxY motif is also present that is characteristic of RecB-family nucleases. The QxxxY motif resides immediately C-terminal to Motif III within a region of predicted alpha-helix. Using mutagenesis, we examined the role of the Q and Y residues in DNA binding, translocation and cleavage. Roles for the QxxxY motif in coordinating the catalytic residues or in stabilizing the nuclease domain on the DNA are discussed.

Motor step size and ATP coupling efficiency of the dsDNA translocase EcoR124I

The Type I restriction-modification enzyme EcoR124I is an archetypical helicase-based dsDNA translocase that moves unidirectionally along the 3′–5′ strand of intact duplex DNA. Using a combination of ensemble and single-molecule measurements, we provide estimates of two physicochemical constants that are fundamental to a full description of motor protein activity—the ATP coupling efficiency (the number of ATP consumed per base pair) and the step size (the number of base pairs transported per motor step). Our data indicate that EcoR124I makes small steps along the DNA of 1 bp in length with 1 ATP consumed per step, but with some uncoupling of the ATPase and translocase cycles occurring so that the average number of ATP consumed per base pair slightly exceeds unity. Our observations form a framework for understanding energy coupling in a great many other motors that translocate along dsDNA rather than ssDNA.

Continuous assays for DNA translocation using fluorescent triplex dissociation: application to type I restriction endonucleases

Fluorescent assays and accompanying kinetic models are described for the analysis of DNA translocation independent of duplex unwinding. A triplex binding site (TBS) was introduced into DNA substrates at precise loci downstream of recognition sequences for type IA, IB and IC restriction endonucleases (EcoKI, EcoAI and EcoR124I, respectively). Each endonuclease was incubated (without ATP) with substrates on which a hexachlorofluoroscein-labelled triplex-forming oligonucleotide (HEX-TFO) was pre-bound. Following addition of ATP, 1-D enzyme motion resulted in collision with, and displacement of, the HEX-TFO, producing a >twofold increase in fluorescent intensity. Alternatively, a decrease in anisotropy following displacement of a rhodamine-labelled TFO was monitored. Using rapid mixing in a stopped-flow fluorimeter, continuous kinetic profiles were produced in which displacement is preceded by a lag-phase, directly proportional to the distance moved. For each enzyme, we obtained not only the translocation rate but also information on slow isomerisation step(s) at initiation. Furthermore, we demonstrated that enzymes deficient in DNA cleavage but with maximal ATPase activity showed initiation and translocation rates identical to wild-type, confirming that DNA strand breaks are not a pre-requisite of motion.

Initiation of translocation by Type I restriction-modification enzymes is associated with a short DNA extrusion

Recognition of 'foreign' DNA by Type I restriction-modification (R-M) enzymes elicits an ATP-dependent switch from methylase to endonuclease activity, which involves DNA translocation by the restriction subunit HsdR. Type I R-M enzymes are composed of three (Hsd) subunits with a stoichiometry of HsdR2:HsdM2:HsdS1 (R2-complex). However, the EcoR124I R-M enzyme can also exist as a cleavage deficient, sub-assembly of HsdR1:HsdM2:HsdS1 (R1-complex). ATPS was used to trap initial translocation complexes, which were visualized by Atomic Force Microscopy (AFM). In the R1-complex, a small bulge, associated with a shortening in the contour-length of the DNA of 8 nm, was observed. This bulge was found to be sensitive to single-strand DNA nucleases, indicative of non-duplexed DNA. R2-complexes appeared larger in the AFM images and the DNA contour length showed a shortening of approximately 11 nm, suggesting that two bulges were formed. Disclosure of the structure of the first stage after the recognition-translocation switch of Type I restriction enzymes forms an important first step in resolving a detailed mechanistic picture of DNA translocation by SF-II DNA translocation motors.

Real-time observation of DNA translocation by the type I restriction modification enzyme EcoR124I

Type I restriction enzymes bind sequence-specifically to unmodified DNA and subsequently pull the adjacent DNA toward themselves. Cleavage then occurs remotely from the recognition site. The mechanism by which these members of the superfamily 2 (SF2) of helicases translocate DNA is largely unknown. We report the first single-molecule study of DNA translocation by the type I restriction enzyme EcoR124I. Mechanochemical parameters such as the translocation rate and processivity, and their dependence on force and ATP concentration, are presented. We show that the two motor subunits of EcoR124I work independently. By using torsionally constrained DNA molecules, we found that the enzyme tracks along the helical pitch of the DNA molecule. This assay may be directly applicable to investigating the tracking of other DNA-translocating motors along their DNA templates.

Enzyme-mediated DNA looping

Most reactions on DNA are carried out by multimeric protein complexes that interact with two or more sites in the DNA and thus loop out the DNA between the sites. The enzymes that catalyze these reactions usually have no activity until they interact with both sites. This review examines the mechanisms for the assembly of protein complexes spanning two DNA sites and the resultant triggering of enzyme activity. There are two main routes for bringing together distant DNA sites in an enzyme complex: either the proteins bind concurrently to both sites and capture the intervening DNA in a loop, or they translocate the DNA between one site and another into an expanding loop, by an energy-dependent translocation mechanism. Both capture and translocation mechanisms are discussed here, with reference to the various types of restriction endonuclease that interact with two recognition sites before cleaving DNA.

General methods for analysis of sequential "n-step" kinetic mechanisms: application to single turnover kinetics of helicase-catalyzed DNA unwinding

Helicase-catalyzed DNA unwinding is often studied using "all or none" assays that detect only the final product of fully unwound DNA. Even using these assays, quantitative analysis of DNA unwinding time courses for DNA duplexes of different lengths, L, using "n-step" sequential mechanisms, can reveal information about the number of intermediates in the unwinding reaction and the "kinetic step size", m, defined as the average number of basepairs unwound between two successive rate limiting steps in the unwinding cycle. Simultaneous nonlinear least-squares analysis using "n-step" sequential mechanisms has previously been limited by an inability to float the number of "unwinding steps", n, and m, in the fitting algorithm. Here we discuss the behavior of single turnover DNA unwinding time courses and describe novel methods for nonlinear least-squares analysis that overcome these problems. Analytic expressions for the time courses, f(ss)(t), when obtainable, can be written using gamma and incomplete gamma functions. When analytic expressions are not obtainable, the numerical solution of the inverse Laplace transform can be used to obtain f(ss)(t). Both methods allow n and m to be continuous fitting parameters. These approaches are generally applicable to enzymes that translocate along a lattice or require repetition of a series of steps before product formation.

A model for dsDNA translocation revealed by a structural motif common to RecG and Mfd proteins

RecG protein differs from other helicases analysed to atomic resolution in that it mediates strand separation via translocation on double-stranded (ds) rather than single-stranded (ss) DNA. We describe a highly conserved helical hairpin motif in RecG and show it to be important for helicase activity. It places two arginines (R609 and R630) in opposing positions within the component helices where they are stabilized by a network of hydrogen bonds involving a glutamate from helicase motif VI. We suggest that disruption of this feature, triggered by ATP hydrolysis, moves an adjacent loop structure in the dsDNA-binding channel and that a swinging arm motion of this loop drives translocation. Substitutions that reverse the charge at R609 or R630 reduce DNA unwinding and ATPase activities, and increase dsDNA binding, but do not affect branched DNA binding. Sequences forming the helical hairpin and loop structures are highly conserved in Mfd protein, a transcription-coupled DNA repair factor that also translocates on dsDNA. The possibility of type I restriction enzymes and chromatin-remodelling factors using similar structures to drive translocation on dsDNA is discussed.

Complex restriction enzymes: NTP-driven molecular motors

Survival is assuredly the prime directive for all living organisms either as individuals or as a species. One of the main challenges encountered by bacterial populations is the danger of bacteriophage attacks, since infection of a single bacterium may rapidly propagate, decimating the entire population. In order to protect themselves against this acute threat, bacteria have developed an array of defence mechanisms, which range from preventing the infection itself via interference with bacteriophage adsorption to the cell surface and prevention of phage DNA injection, to degradation of the injected phage DNA. This last defence mechanism is catalysed by the bacterial restriction-modification (R-M) systems, and in particular, by nucleoside 5'-triphosphate (NTP)-dependent restriction enzymes, e.g. type I and type III R-M systems or the modification-dependent endonucleases. Type I and type III restriction systems have dual properties. They may either act as methylases and protect the host's own DNA against restriction by methylating specific residues, or they catalyse ATP-dependent endonuclease activity so that invading foreign DNA lacking the host-specific methylation is degraded. These defence mechanism systems are further complemented by the presence of methylation-dependent, GTP-dependent endonucleases, that restricts specifically methylated DNA. Although all three types of endonucleases are structurally very different, they share a common functional mechanism. They recognise and bind to specific DNA sequences but do not cleave DNA within those target sites. They belong to the general class of DNA motor proteins, which use the free energy associated with nucleoside 5'-triphosphate hydrolysis to translocate DNA so that the subsequent DNA cleavage event occurs at a distance from the endonuclease recognition site. Moreover, DNA cleavage appears to be a random process triggered upon stalling of the DNA translocation process and requiring dimerisation of the bound endonucleases for a concerted break of both DNA strands. In this review, we present a detailed description and analysis of the functional mechanism of the three known NTP-dependent restriction systems: type I and type III restriction-modification enzymes, as well as the methylation-dependent McrBC endonuclease.