Pathway of oxidative folding of alpha-lactalbumin: a model for illustrating the diversity of disulfide folding pathways

Genetic variability among and within domestic Old and New World camels at the α-lactalbumin gene (LALBA) reveals new alleles and polymorphisms responsible for differential expression

α-Lactalbumin (α-LA), which is encoded by the LALBA gene, is a major whey protein that binds to Ca2+ and facilitates lactose synthesis as a regulatory subunit of the synthase enzyme complex. In addition, it has been shown to play central roles in immune modulation, cell-growth regulation, and antimicrobial activity. In this study, a multitechnical approach was used to fully characterize the LALBA gene and its variants in both coding and regulatory regions for domestic camelids (dromedary, Bactrian camel, alpaca, and llama). The gene analysis revealed a conserved structure among the camelids, but a slight difference in size (2,012 bp on average) due to intronic variations. Promoters were characterized for the transcription factor binding sites (11 found in total). Intraspecies sequence comparison showed 36 SNPs in total (2 in the dromedary, none in the Bactrian camel, 22 in the alpaca, and 12 in the llama), whereas interspecies comparison showed 86 additional polymorphic sites. Eight SNPs were identified as trans-specific polymorphisms, and 2 of them (g.112A>G and g.1229A>G) were particularly interesting in the New World camels. The first creates a new binding site for transcription factor SP1. An enhancing effect of the g.112G variant on the expression was demonstrated by 3 independent pGL3 gene reporter assays. The latter is responsible for the p.78Ile>Val AA replacement and represents novel allelic variants (named LALBA A and B). A link to protein variants has been established by isoelectric focusing (IEF), and bioinformatics analysis revealed that carriers of valine (g.1229G) have a higher glycosylation rate. Genotyping methods based on restriction fragment length polymorphism (PCR-RFLP) were set up for both SNPs. Overall, adenine was more frequent (0.54 and 0.76) at both loci. Four haplotypes were found, and the AA and GA were the most common with a frequency of 0.403 and 0.365, respectively. Conversely, a putative biological gain characterizes the haplotype GG. Therefore, opportunities for rapid directional selection can be realized if this haplotype is associated with favorable milk protein properties. This study adds knowledge at the gene and protein level for α-LA (LALBA) in camelids and importantly contributes to a relatively unexplored research area in these species.

Bioactive peptides of whey: obtaining, activity, mechanism of action, and further applications

Bioactive peptides derived from diverse food proteins have been part of diverse investigations. Whey is a rich source of proteins and components related to biological activity. It is known that proteins have effects that promote health benefits. Peptides derived from whey proteins are currently widely studied. These bioactive peptides are amino acid sequences that are encrypted within the first structure of proteins, which required hydrolysis for their release. The hydrolysis could be through in vitro or in vivo enzymatic digestion and using microorganisms in fermented systems. The biological activities associated with bio-peptides include immunomodulatory properties, antibacterial, antihypertensive, antioxidant and opioid, etc. These functions are related to general conditions of health or reduced risk of certain chronic illnesses. To determine the suitability of these peptides/ingredients for applications in food technology, clinical studies are required to evaluate their bioavailability, health claims, and safety of them. This review aimed to describe the biological importance of whey proteins according to the incidence in human health, their role as bioactive peptides source, describing methods, and obtaining technics. In addition, the paper exposes biochemical mechanisms during the activity exerted by biopeptides of whey, and their application trends.

Characterization of Conjugates between α-Lactalbumin and Benzyl Isothiocyanate-Effects on Molecular Structure and Proteolytic Stability

In complex foods, bioactive secondary plant metabolites (SPM) can bind to food proteins. Especially when being covalently bound, such modifications can alter the structure and, thus, the functional and biological properties of the proteins. Additionally, the bioactivity of the SPM can be affected as well. Consequently, knowledge of the influence of chemical modifications on these properties is particularly important for food processing, food safety, and nutritional physiology. As a model, the molecular structure of conjugates between the bioactive metabolite benzyl isothiocyanate (BITC, a hydrolysis product of the glucosinolate glucotropaeolin) and the whey protein α-lactalbumin (α-LA) was investigated using circular dichroism spectroscopy, anilino-1-naphthalenesulfonic acid fluorescence, and dynamic light scattering. Free amino groups were determined before and after the BITC conjugation. Finally, mass spectrometric analysis of the BITC-α-LA protein hydrolysates was performed. As a result of the chemical modifications, a change in the secondary structure of α-LA and an increase in surface hydrophobicity and hydrodynamic radii were documented. BITC modification at the ε-amino group of certain lysine side chains inhibited tryptic hydrolysis. Furthermore, two BITC-modified amino acids were identified, located at two lysine side chains (K32 and K113) in the amino acid sequence of α-LA.

Molecular Analytical Assessment of Thermally Precipitated α-Lactalbumin after Resolubilization

Selective thermal precipitation followed by a mechanical separation step is a well described method for fractionation of the main whey proteins, α-lactalbumin (α-la) and β-lactoglobulin (β-lg). By choosing appropriate environmental conditions the thermal precipitation of either α-la or β-lg can be induced. Whereas β-lg irreversibly aggregates, the precipitated α-la can be resolubilized by a subsequent adjustment of the solution’s pH and the ionic composition. This study reports on the analytical characterization of resolubilized α-la compared to its native counterpart as a reference in order to assess whether the resolubilized α-la can be considered close to ‘native’. Turbidity and quantification by RP-HPLC of the resolubilized α-la solutions were used as a measure of solubility in aqueous environment. RP-HPLC was also applied to determine the elution time as a measure for protein’s hydrophobicity. DSC measurement was performed to determine the denaturation peak temperature of resolubilized α-la. FTIR spectroscopy provided insights in the secondary structure. The refolding of α-la achieved best results using pH 8.0 and a 3-fold stoichiometric amount of Ca²⁺ per α-la molecule. The results showed that the mechanism of aggregation induced by gentle thermal treatment under acidic conditions with subsequent mechanical separation is reversible to a certain extent, however, the exact native conformation was not restored.

Flexible Folding: Disulfide-Containing Peptides and Proteins Choose the Pathway Depending on the Environments

In the last few decades, development of novel experimental techniques, such as new types of disulfide (SS)-forming reagents and genetic and chemical technologies for synthesizing designed artificial proteins, is opening a new realm of the oxidative folding study where peptides and proteins can be folded under physiologically more relevant conditions. In this review, after a brief overview of the historical and physicochemical background of oxidative protein folding study, recently revealed folding pathways of several representative peptides and proteins are summarized, including those having two, three, or four SS bonds in the native state, as well as those with odd Cys residues or consisting of two peptide chains. Comparison of the updated pathways with those reported in the early years has revealed the flexible nature of the protein folding pathways. The significantly different pathways characterized for hen-egg white lysozyme and bovine milk α-lactalbumin, which belong to the same protein superfamily, suggest that the information of protein folding pathways, not only the native folded structure, is encoded in the amino acid sequence. The application of the flexible pathways of peptides and proteins to the engineering of folded three-dimensional structures is an interesting and important issue in the new realm of the current oxidative protein folding study.

Revisiting the Formation of a Native Disulfide Bond: Consequences for Protein Regeneration and Beyond

Oxidative protein folding involves the formation of disulfide bonds and the regeneration of native structure (N) from the fully reduced and unfolded protein (R). Oxidative protein folding studies have provided a wealth of information on underlying physico-chemical reactions by which disulfide-bond-containing proteins acquire their catalytically active form. Initially, we review key events underlying oxidative protein folding using bovine pancreatic ribonuclease A (RNase A), bovine pancreatic trypsin inhibitor (BPTI) and hen-egg white lysozyme (HEWL) as model disulfide bond-containing folders and discuss consequential outcomes with regard to their folding trajectories. We re-examine the findings from the same studies to underscore the importance of forming native disulfide bonds and generating a “native-like” structure early on in the oxidative folding pathway. The impact of both these features on the regeneration landscape are highlighted by comparing ideal, albeit hypothetical, regeneration scenarios with those wherein a native-like structure is formed relatively “late” in the R→N trajectory. A special case where the desired characteristics of oxidative folding trajectories can, nevertheless, stall folding is also discussed. The importance of these data from oxidative protein folding studies is projected onto outcomes, including their impact on the regeneration rate, yield, misfolding, misfolded-flux trafficking from the endoplasmic reticulum (ER) to the cytoplasm, and the onset of neurodegenerative disorders.

α-Lactalbumin, Amazing Calcium-Binding Protein

α-Lactalbumin (α-LA) is a small (Mr 14,200), acidic (pI 4–5), Ca²⁺-binding protein. α-LA is a regulatory component of lactose synthase enzyme system functioning in the lactating mammary gland. The protein possesses a single strong Ca²⁺-binding site, which can also bind Mg²⁺, Mn²⁺, Na⁺, K⁺, and some other metal cations. It contains several distinct Zn²⁺-binding sites. Physical properties of α-LA strongly depend on the occupation of its metal binding sites by metal ions. In the absence of bound metal ions, α-LA is in the molten globule-like state. The binding of metal ions, and especially of Ca²⁺, increases stability of α-LA against the action of heat, various denaturing agents and proteases, while the binding of Zn²⁺ to the Ca²⁺-loaded protein decreases its stability and causes its aggregation. At pH 2, the protein is in the classical molten globule state. α-LA can associate with membranes at neutral or slightly acidic pH at physiological temperatures. Depending on external conditions, α-LA can form amyloid fibrils, amorphous aggregates, nanoparticles, and nanotubes. Some of these aggregated states of α-LA can be used in practical applications such as drug delivery to tissues and organs. α-LA and some of its fragments possess bactericidal and antiviral activities. Complexes of partially unfolded α-LA with oleic acid are cytotoxic to various tumor and bacterial cells. α-LA in the cytotoxic complexes plays a role of a delivery carrier of cytotoxic fatty acid molecules into tumor and bacterial cells across the cell membrane. Perhaps in the future the complexes of α-LA with oleic acid will be used for development of new anti-cancer drugs.

Effects of Metal Ions, Temperature, and a Denaturant on the Oxidative Folding Pathways of Bovine α-Lactalbumin

Bovine α-lactalbumin (αLA) has four disulfide (SS) bonds in the native form (N). On the oxidative folding pathways of this protein, two specific SS folding intermediates, i.e., (61–77, 73–91) and des[6–120], which have two and three native SS bonds, respectively, accumulate predominantly in the presence of Ca²⁺. In this study, we reinvestigated the pathways using a water-soluble cyclic selenoxide reagent, trans-3,4-dihydroxyselenolane oxide (DHS^ox), as a strong and quantitative oxidant to oxidize the fully reduced form (R). In the presence of ethylenediaminetetraacetic acid (EDTA) (under a metal-free condition), SS formation randomly proceeded, and N did not regenerate. On the other hand, two specific SS intermediates transiently generated in the presence of Ca²⁺. These intermediates could be assigned to (61–77, 73–91) and des[6–120] having two common SS bonds, i.e., Cys61-Cys77 and Cys73-Cys91, near the calcium binding pocket of the β-sheet domain. Much faster folding to N was observed in the presence of Mn²⁺, whereas Na⁺, K⁺, Mg²⁺, and Zn²⁺ did not affect the pathways. The two key intermediates were susceptible to temperature and a denaturant. The oxidative folding pathways revealed were significantly different from those of hen egg white lysozyme, which has the same SS-bonding pattern as αLA, suggesting that the folding pathways of SS-containing proteins can alter depending on the amino acid sequence and other factors, even when the SS-bond topologies are similar to each other.

Dimerization of matrix metalloproteinase-2 (MMP-2): functional implication in MMP-2 activation

Matrix metalloproteinase-2 (MMP-2) functions in diverse biological processes through the degradation of extracellular and non-extracellular matrix molecules. Because of its potential for tissue damage, there are several ways to regulate MMP-2 activity, including gene expression, compartmentalization, zymogen activation, and enzyme inactivation by extracellular inhibitors. Enzyme regulation through zymogen activation is important for the regulation of MMP-2 activity. In our previous studies, we showed that thrombin directly cleaved the propeptide of MMP-2 at specific sites for enzyme activation. We also demonstrated that heparan sulfate was required for thrombin-mediated activation of pro-MMP-2 by binding to thrombin, presumably through conformational changes at the active site of the enzyme. This suggests a regulatory mechanism for thrombin-mediated activation of pro-MMP-2. In this study, we found that MMP-2 formed a reduction-sensitive homodimer in a controlled manner and that Ca(2+) ion was essential for homodimerization of MMP-2. Homodimerization was not associated with protein kinase C-mediated phosphorylation of MMP-2. MMP-2 formed a homodimer through an intermolecular disulfide bond between Cys(102) and the neighboring Cys(102). Homodimerization of MMP-2 enhanced thrombin-mediated activation of pro-MMP-2. Moreover, the MMP-2 homodimer could cleave a small peptide substrate without removal of the propeptide. Taken together, our experimental data suggest a novel regulatory mechanism for pro-MMP-2 activation that is modulated through homodimerization of MMP-2.

Characterization of an alternative low energy fold for bovine α-lactalbumin formed by disulfide bond shuffling

Bovine α-lactalbumin (αLA) forms a misfolded disulfide bond shuffled isomer, X-αLA. This X-αLA isomer contains two native disulfide bridges (Cys 6-Cys 120 and Cys 28-Cys 111) and two non-native disulfide bridges (Cys 61-Cys 73 and Cys 77-Cys 91). MD simulations have been used to characterize the X-αLA isomer and its formation via disulfide bond shuffling and to compare it with the native fold of αLA. In the simulations of the X-αLA isomer the structure of the α-domain of native αLA is largely retained in agreement with experimental data. However, there are significant rearrangements in the β-domain, including the loss of the native β-sheet and calcium binding site. Interestingly, the energies of X-αLA and native αLA in simulations in the absence of calcium are closely similar. Thus, the X-αLA isomer represents a different low energy fold for the protein. Calcium binding to native αLA is shown to help preserve the structure of the β-domain of the protein limiting possibilities for disulfide bond shuffling. Hence, binding calcium plays an important role in both maintaining the native structure of αLA and providing a mechanism for distinguishing between folded and misfolded species.

Diverse pathways of oxidative folding of disulfide proteins: underlying causes and folding models

The pathway of oxidative folding of disulfide proteins exhibits a high degree of diversity, which is manifested mainly by distinct structural heterogeneity and diverse rearrangement pathways of folding intermediates. During the past two decades, the scope of this diversity has widened through studies of more than 30 disulfide-rich proteins by various laboratories. A more comprehensive landscape of the mechanism of protein oxidative folding has emerged. This review will cover three themes. (1) Elaboration of the scope of diversity of disulfide folding pathways, including the two opposite extreme models, represented by bovine pancreatic trypsin inhibitor (BPTI) and hirudin. (2) Demonstration of experimental evidence accounting for the underlying mechanism of the folding diversity. (3) Discussion of the convergence between the extreme models of oxidative folding and models of conventional conformational folding (framework model, hydrophobic collapse model).

Distinct folding pathways of two homologous disulfide proteins: bovine pancreatic trypsin inhibitor and tick anticoagulant peptide

The folding pathways of disulfide proteins vary substantially (Arolas et al., Trends Biochem Sci 31: 292-301, 2006). The diversity is mainly manifested by (a) the extent of heterogeneity of folding intermediates, (b) the extent of presence of native-like intermediates, and (c) the variation of folding kinetics. Even among structurally similar proteins, the difference can be enormous. This is demonstrated in this concise review with two structurally homologous kunitz-type protease inhibitors, bovine pancreatic trypsin inhibitor and tick anticoagulant peptide, as well as a group of cystine knot proteins. The diversity of their folding mechanisms is illustrated with two different folding techniques: (a) the conventional method of disulfide oxidation (oxidative folding), and (b) the novel method of disulfide scrambling (Chang, J Biol Chem 277: 120-126, 2002). This review also highlights the convergence of folding models concluded form the conventional conformational folding and those obtained by oxidative folding.

Denaturation and unfolding of human anaphylatoxin C3a: an unusually low covalent stability of its native disulfide bonds

The complement C3a anaphylatoxin is a major molecular mediator of innate immunity. It is a potent activator of mast cells, basophils and eosinophils and causes smooth muscle contraction. Structurally, C3a is a relatively small protein (77 amino acids) comprising a N-terminal domain connected by 3 native disulfide bonds and a helical C-terminal segment. The structural stability of C3a has been investigated here using three different methods: Disulfide scrambling; Differential CD spectroscopy; and Reductive unfolding. Two uncommon features regarding the stability of C3a and the structure of denatured C3a have been observed in this study. (a) There is an unusual disconnection between the conformational stability of C3a and the covalent stability of its three native disulfide bonds that is not seen with other disulfide proteins. As measured by both methods of disulfide scrambling and differential CD spectroscopy, the native C3a exhibits a global conformational stability that is comparable to numerous proteins with similar size and disulfide content, all with mid-point denaturation of [GdmCl](1/2) at 3.4-5M. These proteins include hirudin, tick anticoagulant protein and leech carboxypeptidase inhibitor. However, the native disulfide bonds of C3a is 150-1000 fold less stable than those proteins as evaluated by the method of reductive unfolding. The 3 native disulfide bonds of C3a can be collectively and quantitatively reduced with as low as 1mM of dithiothreitol within 5 min. The fragility of the native disulfide bonds of C3a has not yet been observed with other native disulfide proteins. (b) Using the method of disulfide scrambling, denatured C3a was shown to consist of diverse isomers adopting varied extent of unfolding. Among them, the most extensively unfolded isomer of denatured C3a is found to assume beads-form disulfide pattern, comprising Cys(36)-Cys(49) and two disulfide bonds formed by two pair of consecutive cysteines, Cys(22)-Cys(23) and Cys(56)-Cys(57), a unique disulfide structure of polypeptide that has not been documented previously.

Direct observation of conformational folding coupled with disulphide rearrangement by using a water-soluble selenoxide reagent--a case of oxidative regeneration of ribonuclease A under weakly basic conditions

Oxidative regeneration pathways of bovine pancreatic ribonuclease A (RNase A), which has four SS linkages, were studied at 25 degrees C and pH 8.0 by using trans-3,4-dihydroxy-1-selenolane oxide (DHS(ox)), a new selenoxide reagent with strong oxidation power. The short-term folding study using a quench-flow instrument ( approximately 1 min) revealed that early intermediates (1S, 2S, 3S and 4S) are formed stochastically and irreversibly from the reduced protein (R) and do not have any stable structures. In the long-term folding study ( approximately 300 min), on the other hand, slow generation of the key intermediates (des[65-72] and des[40-95]) through SS rearrangement from the 3S intermediate ensemble was observed, followed by slight formation of native RNase A (N). The parallel UV and CD measurements demonstrated that formation of the key intermediates is accompanied with the formation of the native-like structures. Thus, DHS(ox) allowed facile identification of the conformational folding steps coupled with SS rearrangement on the major oxidative folding pathways.

Dissimilarity in the oxidative folding of onconase and ribonuclease A, two structural homologues

The oxidative folding of frog onconase (ONC), a member of the ribonuclease A family, was examined and shows markedly different behavior compared to its structural homologue bovine pancreatic ribonuclease A (RNase A) under similar conditions. Application of a reduction pulse (using a small amount of reduced dithiothreitol) during the oxidative regeneration of ONC indicated the survival of the native protein along with three other (structured) species, I(1), I(2) and I(3), with the rest of the unstructured species being converted to fully reduced protein. Mass spectrometry indicates that I(1) has two disulfide bonds, whereas I(2) and I(3) have three disulfide bonds each. A disulfide mapping method, based on cyanylation, was used to identify I(2) and I(3) as des-[30-75] and des-[19-68], respectively. On enzymatic digestion using trypsin, I(1) was identified as des-[19-68, 30-75]. Differences in the intermediates that are generated during the oxidative folding of the two structural homologues, RNase A and ONC, demonstrate that regenerative pathways are not necessarily influenced by tertiary structure. This indicates that the lack of a disulfide bond in ONC, analogous to the (65-72) disulfide bond in RNase A which plays an important role in its oxidative regeneration, does not adversely affect the oxidative folding of ONC.

Diversity of folding pathways and folding models of disulfide proteins

Comprehensive understanding of the mechanism of protein folding requires the elucidation of both a folding pathway and a folding model. This entails characterization of the properties and structures of folding intermediates populated along the folding pathway, as well as the formation and interplay of secondary structures and tertiary structures along the course of folding. Using the conventional unfolding-refolding technique, there are limitations of acquiring these data in detail because of the inherent difficulty of trapping and analysis of folding intermediates. The technique of oxidative folding, in contrast, permits trapping, isolation, and further structural characterization of folding intermediates at any stage of the folding process. In this brief review, we present the potential of the technique of oxidative folding for concurrent analysis of both folding pathways and folding models.

Pathway of oxidative folding of a 3-disulfide alpha-lactalbumin may resemble either BPTI model or hirudin model

Pathways of oxidative folding of disulfide proteins display a high degree of diversity and vary among two extreme models. The BPTI model is defined by limited species of folding intermediates adopting mainly native disulfide bonds. The hirudin model is characterized by highly heterogeneous folding intermediates containing mostly non-native disulfide bonds. alphaLA-IIIA is a 3-disulfide variant of alpha-lactalbumin (alphaLA) with a 3-D conformation essentially identical to that of intact alphaLA. alphaLA-IIIA contains 3 native disulfide bonds of alphaLA, two of them are located at the calcium binding beta-subdomain (Cys61-Cys77 and Cys73-Cys91) and the third bridge is located within the alpha-helical domain of the molecule (Cys28-Cys111). We investigate here the pathway of oxidative folding of fully reduced alphaLA-IIIA with and without stabilization of its beta-subdomain by calcium binding. In the absence of calcium, the folding pathway of alphaLA-IIIA was shown to resemble that of hirudin model. Upon stabilization of beta-sheet domain by calcium binding, the folding pathway of alphaLA-IIIA exhibits a striking similarity to that of BPTI model. Three predominant folding intermediates of alphaLA-IIIA containing exclusively native disulfide bonds were isolated and structurally characterized. Our results further demonstrate that stabilization of subdomains in a protein may dictate its folding pathway and represent a major cause for the existing diversity in the folding pathways of the disulfide-containing proteins.

Characterization of the unfolded state of bovine alpha-lactalbumin and comparison with unfolded states of homologous proteins

The unfolded states of three homologous proteins with a very similar fold have been investigated by heteronuclear NMR spectroscopy. Secondary structure propensities as derived from interpretation of chemical shifts and motional restrictions as evidenced by heteronuclear (15)N relaxation rates have been analyzed in the reduced unfolded states of hen lysozyme and the calcium-binding proteins bovine alpha-lactalbumin and human alpha-lactalbumin. For all three proteins, significant deviations from random-coil predictions can be identified; in addition, the unfolded states also differ from each other, despite the fact that they possess very similar structures in their native states. Deviations from random-coil motional properties are observed in the alpha- and the beta-domain in bovine alpha-lactalbumin and lysozyme, while only regions within the alpha-domain deviate in human alpha-lactalbumin. The motional restrictions and residual secondary structure are determined both by the amino acid sequence of the protein and by residual long-range interactions. Even a conservative single point mutation from I to L in a highly conserved region between the two alpha-lactalbumins results in considerable differences in the motional properties. Given the differences in oxidative folding between hen lysozyme and alpha-lactalbumin, the results obtained on the unfolded states suggest that residual long-range interactions, i.e., those between the alpha- and the beta-domain of lysozyme, may act as nucleation sites for protein folding, while this property of residual structure is replaced by the calcium-binding site between the domains in alpha-lactalbumin.

Folding of small disulfide-rich proteins: clarifying the puzzle

The process by which small proteins fold to their native conformations has been intensively studied over the past few decades. The particular chemistry of disulfide-bond formation has facilitated the characterization of the oxidative folding of numerous small, disulfide-rich proteins with results that illustrate a high level of diversity in folding mechanisms, differing in the heterogeneity and native disulfide-bond content of their intermediates. Information from folding studies of these proteins, together with the recent structural determinations of predominant intermediates, has provided new molecular insights into oxidative folding and clarifies the major rules that govern it.

Oxidative folding of hirudin in human serum

Human serum contains factors that promote oxidative folding of disulphide proteins. We demonstrate this here using hirudin as a model. Hirudin is a leech-derived thrombin-specific inhibitor containing 65 amino acids and three disulphide bonds. Oxidative folding of hirudin in human serum is shown to involve an initial phase of rapid disulphide formation (oxidation) to form the scrambled isomers as intermediates. This is followed by the stage of slow disulphide shuffling of scrambled isomers to attain the native hirudin. The kinetics of regenerating the native hirudin depend on the concentrations of both hirudin and human serum. Quantitative regeneration of native hirudin in undiluted human serum can be completed within 48 h, without any redox supplement. These results cannot be adequately explained by the existing oxidized thiol agents in human serum or the macromolecular crowding effect, and therefore indicate that human serum may contain yet to be identified potent oxidase(s) for assisting protein folding.

Fully oxidized scrambled isomers are essential and predominant folding intermediates of cardiotoxin-III

Scrambled isomers (X-isomers) are fully oxidized, non-native isomers of disulfide proteins. They have been shown to represent important intermediates along the pathway of oxidative folding of numerous disulfide proteins. A simple method to assess whether X-isomers present as folding intermediate is to conduct oxidative folding of fully reduced protein in the alkaline buffer alone without any supplementing thiol catalyst or redox agent. Cardiotoxin-III (CTX-III) contains 60 amino acids and four disulfide bonds. The mechanism of oxidative folding of CTX-III has been systematically characterized here by analysis of the acid trapped folding intermediates. Folding of CTX-III was shown to proceed sequentially through 1-disulfide, 2-disulfide, 3-disulfide and 4-disulfide (scrambled) isomers as folding intermediates to reach the native structure. When folding of CTX-III was performed in the buffer alone, more than 97% of the protein was trapped as 4-disulfide X-isomers, unable to convert to the native structure due to the absence of thiol catalyst. In the presence of thiol catalyst (GSH) or redox agents (GSH/GSSG), the recovery of native CTX-III was 80-85%. These results demonstrate that X-isomers play an essential and predominant role in the oxidative folding of CTX-III.

Oxidative folding of conotoxins sharing an identical disulfide bridging framework

Conotoxins are short, disulfide-rich peptide neurotoxins produced in the venom of predatory marine cone snails. It is generally accepted that an estimated 100,000 unique conotoxins fall into only a handful of structural groups, based on their disulfide bridging frameworks. This unique molecular diversity poses a protein folding problem of relationships between hypervariability of amino acid sequences and mechanism(s) of oxidative folding. In this study, we present a comparative analysis of the folding properties of four conotoxins sharing an identical pattern of cysteine residues forming three disulfide bridges, but otherwise differing significantly in their primary amino acid sequence. Oxidative folding properties of M-superfamily conotoxins GIIIA, PIIIA, SmIIIA and RIIIK varied with respect to kinetics and thermodynamics. Based on rates for establishing the steady-state distribution of the folding species, two distinct folding mechanisms could be distinguished: first, rapid-collapse folding characterized by very fast, but low-yield accumulation of the correctly folded form; and second, slow-rearrangement folding resulting in higher accumulation of the properly folded form via the reshuffling of disulfide bonds within folding intermediates. Effects of changing the folding conditions indicated that the rapid-collapse and the slow-rearrangement mechanisms were mainly determined by either repulsive electrostatic or productive noncovalent interactions, respectively. The differences in folding kinetics for these two mechanisms were minimized in the presence of protein disulfide isomerase. Taken together, folding properties of conotoxins from the M-superfamily presented in this work and from the O-superfamily published previously suggest that conotoxin sequence diversity is also reflected in their folding properties, and that sequence information rather than a cysteine pattern determines the in vitro folding mechanisms of conotoxins.

Role of kinetic intermediates in the folding of leech carboxypeptidase inhibitor

The oxidative folding and reductive unfolding pathways of leech carboxypeptidase inhibitor (LCI; four disulfides) have been characterized in this work by structural and kinetic analysis of the acid-trapped folding intermediates. The oxidative folding of reduced and denatured LCI proceeds rapidly through a sequential flow of 1-, 2-, 3-, and 4-disulfide (scrambled) species to reach the native form. Folding intermediates of LCI comprise two predominant 3-disulfide species (designated as III-A and III-B) and a heterogeneous population of scrambled isomers that consecutively accumulate along the folding reaction. Our study reveals that forms III-A and III-B exclusively contain native disulfide bonds and correspond to stable and partially structured species that interconvert, reaching an equilibrium prior to the formation of the scrambled isomers. Given that these intermediates act as kinetic traps during the oxidative folding, their accumulation is prevented when they are destabilized, thus leading to a significant acceleration of the folding kinetics. III-A and III-B forms appear to have both native disulfides bonds and free thiols similarly protected from the solvent; major structural rearrangements through the formation of scrambled isomers are required to render native LCI. The reductive unfolding pathway of LCI undergoes an apparent all-or-none mechanism, although low amounts of intermediates III-A and III-B can be detected, suggesting differences in protection against reduction among the disulfide bonds. The characterization of III-A and III-B forms shows that the former intermediate structurally and functionally resembles native LCI, whereas the III-B form bears more resemblance to scrambled isomers.

Identifying and modulating disulfide formation in the biopharmaceutical production of a recombinant protein vaccine candidate

Structural conversion of the serotype A recombinant botulinum neurotoxin heavy chain fragment (rBoNTA(Hc)) produced intracellularly in Pichia pastoris yeast was observed and characterized during purification development efforts. A pH screening study captured the transformation stages of the original recovered species into its derived counterpart and a number of analytical tools such as peptide mapping by LC/MS confirmed the formation of a disulfide bond, especially in samples of neutral to basic pH. A cation exchange chromatographic method proved useful in following the incidence of the reaction in various rBoNTA(Hc) samples. The disulfide formation kinetics were characterized using a one-quarter quadratic factorial design, following the investigation and development of controlled oxidation conditions using cysteine and cystamine as the redox pair. Temperature, pH and concentration of the redox pair had a significant effect on the yield and rate of the disulfide formation. This controlled reaction was eventually introduced as a functional unit operation in the purification process. The summation of preliminary scale-up and potency data showed scalability and robustness in the production of an active disulfide-bonded form of a recombinant botulism vaccine candidate. The presence of the disulfide bond did not effect the vaccine potency and it enhanced the molecule's thermal stability.