Thermal denaturation of spinach plastocyanin: effect of copper site oxidation state and molecular oxygen

Irreversible denaturation of maltodextrin glucosidase studied by differential scanning calorimetry, circular dichroism, and turbidity measurements

Thermal denaturation of Escherichia coli maltodextrin glucosidase was studied by differential scanning calorimetry, circular dichroism (230 nm), and UV-absorption measurements (340 nm), which were respectively used to monitor heat absorption, conformational unfolding, and the production of solution turbidity. The denaturation was irreversible, and the thermal transition recorded at scan rates of 0.5–1.5 K/min was significantly scan-rate dependent, indicating that the thermal denaturation was kinetically controlled. The absence of a protein-concentration effect on the thermal transition indicated that the denaturation was rate-limited by a mono-molecular process. From the analysis of the calorimetric thermograms, a one-step irreversible model well represented the thermal denaturation of the protein. The calorimetrically observed thermal transitions showed excellent coincidence with the turbidity transitions monitored by UV-absorption as well as with the unfolding transitions monitored by circular dichroism. The thermal denaturation of the protein was thus rate-limited by conformational unfolding, which was followed by a rapid irreversible formation of aggregates that produced the solution turbidity. It is thus important to note that the absence of the protein-concentration effect on the irreversible thermal denaturation does not necessarily means the absence of protein aggregation itself. The turbidity measurements together with differential scanning calorimetry in the irreversible thermal denaturation of the protein provided a very effective approach for understanding the mechanisms of the irreversible denaturation. The Arrhenius-equation parameters obtained from analysis of the thermal denaturation were compared with those of other proteins that have been reported to show the one-step irreversible thermal denaturation. Maltodextrin glucosidase had sufficiently high kinetic stability with a half-life of 68 days at a physiological temperature (37°C).

Copper-substituted forms of the wild type and C42A variant of rubredoxin

In order to gain insights into the interplay between Cu(I) and Cu(II) in sulfur-rich protein environments, the first preparation and characterization of copper-substituted forms of the wild-type rubredoxin (Rd) from Desulfovibrio vulgaris Hildenborough are reported, as well as those of its variant C42A-Rd. The initial products appear to be tetrahedral Cu(I)(S-Cys)n species for the wild type (n=4) and the variant C42A (n=3, with an additional unidentified ligand). These species are unstable to aerial oxidation to products, whose properties are consistent with square planar Cu(II)(S-Cys)n species. These Cu(II) intermediates are susceptible to auto-reduction by ligand S-Cys to produce stable Cu(I) final products. The original Cu(I) center in the wild-type system can be regenerated by reduction, suggesting that the active site can accommodate Cu(I)(S-Cys)2 and Cys-S-S-Cys fragments in the final product. The absence of one S-Cys ligand prevents similar regeneration in the C42A-Rd system. These results emphasize the redox instability of Cu(II)-(S-Cys)n centers.

The influence of active site loop mutations on the thermal stability of azurin from Pseudomonas aeruginosa

The copper site and overall structures of azurin (AZ) variants in which the amicyanin (AMI) and plastocyanin (PC) metal binding loops have been introduced, AZAMI and AZPC, respectively, are similar to that of AZ, whereas the loop conformations resemble those in the native proteins. To assess the influence of these loop mutations on stability, the thermal unfolding of AZAMI and AZPC has been investigated by differential scanning calorimetry, absorption and fluorescence spectroscopy. The calorimetric profiles of both variants exhibit a complex shape consisting of two endothermic peaks and an exothermic peak. The temperature of the maximum heat of absorption for the single endothermic peak is 82.7°C for AZ, whereas for AZAMI and AZPC the most intense endothermic peaks are at 74.9 and 68.1°C comparable to values for AMI and PC, respectively. Denaturation investigated using the temperature dependence of the absorbance at ∼600nm and Trp emission, also demonstrates decreased stability for both loop mutants. The thermal transition between the native and the denaturated states is irreversible, scan rate dependent and consistent with the two-state irreversible model. The structure of the active-site loop has a dramatic effect on the kinetic stability and the unfolding pathway of cupredoxins.

Cupricyclins, novel redox-active metallopeptides based on conotoxins scaffold

Highly stable natural scaffolds which tolerate multiple amino acid substitutions represent the ideal starting point for the application of rational redesign strategies to develop new catalysts of potential biomedical and biotechnological interest. The knottins family of disulphide-constrained peptides display the desired characteristics, being highly stable and characterized by hypervariability of the inter-cysteine loops. The potential of knottins as scaffolds for the design of novel copper-based biocatalysts has been tested by engineering a metal binding site on two different variants of an ω-conotoxin, a neurotoxic peptide belonging to the knottins family. The binding site has been designed by computational modelling and the redesigned peptides have been synthesized and characterized by optical, fluorescence, electron spin resonance and nuclear magnetic resonance spectroscopy. The novel peptides, named Cupricyclin-1 and -2, bind one Cu²⁺ ion per molecule with nanomolar affinity. Cupricyclins display redox activity and catalyze the dismutation of superoxide anions with an activity comparable to that of non-peptidic superoxide dismutase mimics. We thus propose knottins as a novel scaffold for the design of catalytically-active mini metalloproteins.

How the local geometry of the Cu-binding site determines the thermal stability of blue copper proteins

Identifying the factors that govern the thermal resistance of cupredoxins is essential for understanding their folding and stability, and for improving our ability to design highly stable enzymes with potential biotechnological applications. Here, we show that the thermal unfolding of plastocyanins from two cyanobacteria--the mesophilic Synechocystis and the thermophilic Phormidium--is closely related to the short-range structure around the copper center. Cu K-edge X-ray absorption spectroscopy shows that the bond length between Cu and the S atom from the cysteine ligand is a key structural factor that correlates with the thermal stability of the cupredoxins in both oxidized and reduced states. These findings were confirmed by an additional study of a site-directed mutant of Phormidium plastocyanin showing a reverse effect of the redox state on the thermal stability of the protein.

Changes in non-core regions stabilise plastocyanin from the thermophilic cyanobacterium Phormidium laminosum

We report a theoretical investigation on the different stabilities of two plastocyanins. The first one belongs to the thermophilic cyanobacterium Phormidium laminosum and the second one belongs to its mesophilic relative Synechocystis sp. These proteins share the same topology and secondary-structure elements; however, the melting temperatures of their oxidised species differ by approximately 15 K. Long-time-scale molecular dynamics simulations, performed at different temperatures, show that the thermophilic protein optimises a set of intramolecular interactions (interstrand hydrogen bonding, salt bridging and hydrophobic clustering) within the region that comprises the strands beta 5 and beta 6, loop L5 and the helix. This region exhibits most of the differences in the primary sequence between the two proteins and, in addition, it is involved in the interaction with known physiological partners. Further work is in progress to unveil the specific structural features responsible for the different thermal stability of the two proteins.

Modulation of copper site properties by remote residues determines the stability of plastocyanins

The metal cofactor determines the thermal stability in cupredoxins, but how the redox state of copper modulates their melting points remains unknown. The metal coordination environment is highly conserved in cyanobacterial plastocyanins. However, the oxidised form is more stable than the reduced one in thermophilic Phormidium, but the opposite occurs in mesophilic Synechocystis. We have performed neutral amino-acid substitutions at loops of Phormidium plastocyanin far from the copper site. Notably, mutation P49G/G50P confers a redox-dependent thermal stability similar to that of the mesophilic plastocyanin. Moreover, X-ray absorption spectroscopy reveals that P49G/G50P mutation makes the electron density distribution at the oxidised copper site shift towards that of Synechocystis plastocyanin.

Role of copper in thermal stability of human ceruloplasmin

Human ceruloplasmin (CP) is a multicopper oxidase essential for normal iron homeostasis. The protein has six domains with one type-1 copper in each of domains 2, 4, and 6; the remaining coppers form a catalytic trinuclear cluster at the interface between domains 1 and 6. To assess the role of the coppers in CP thermal stability, we have probed the thermal unfolding process as a function of scan rate of holo- and apo-forms using several detection methods (circular dichroism, aromatic and 8-anilino-naphthalene-1-sulfonic acid fluorescence, visible absorption, activity, and differential scanning calorimetry). Both species of CP undergo irreversible thermal reactions to denatured states with significant residual structure. For identical scan rates, the thermal midpoint appears at temperatures 15-20 degrees higher for the holo- as compared with the apo- form. The thermal data for both forms were fit by a mechanistic model involving two consecutive, irreversible steps (N --> I --> D). The holo-intermediate, I, has lost one oxidized type-1 copper and secondary structure in at least one domain; however, the trinuclear copper cluster remains intact as it is functional in oxidase activity. The activation parameters obtained from the fits to the thermal transitions were used to assess the kinetic stability of apo- and holo-CP at physiological temperatures (i.e., at 37 degrees C). It emerges that native CP (i.e., with six coppers) is rather unstable and converts to I in <1 day at 37 degrees C. Nonetheless, this form remains intact for more than 2 weeks and may thus be a biologically relevant state of CP in vivo. In contrast, apo-CP unfolds rapidly: the denatured state is reached in <2 days at 37 degrees C.

Role of copper in folding and stability of cupredoxin-like copper-carrier protein CopC

CopC is a periplasmic copper carrier that, in contrast to cytoplasmic copper chaperones, has a beta-barrel fold and two metal-binding sites distinct for Cu(II) and Cu(I). The copper sites are located in each end of the molecule: the Cu(I) site involves His and Met coordination whereas the Cu(II) site consists of charged residues. To reveal biophysical properties of this protein, we have explored the effects of the cofactors on CopC unfolding in vitro. We demonstrate that Cu(II) coordination affects both protein stability and unfolding pathway, whereas Cu(I) has only a small effect on stability. Apo-CopC unfolds in a two-state reaction between pH 4 and 7.5 with maximal stability at pH 6. In contrast, Cu(II)-CopC unfolds in a three-state reaction at pH6 that involves a partly folded intermediate that retains Cu(II). This intermediate exhibits high thermal and chemical stability. Unique energetic and structural properties of different metalated CopC forms may help facilitate metal transport to many partners in vivo.

A comparative investigation of the thermal unfolding of pseudoazurin in the Cu(II)-holo and apo form

The contribution of the copper ion to the stability and to the unfolding pathway of pseudoazurin was investigated by a comparative analysis of the thermal unfolding of the Cu(II)-holo and apo form of the protein. The unfolding has been followed by calorimetry, fluorescence, optical density, and electron paramagnetic resonance (EPR) spectroscopy. The thermal transition of Cu(II)-holo pseudoazurin is irreversible and occurs between 60.0 and 67.3 degrees C, depending on the scan rate and technique used. The denaturation pathway of Cu(II)-holo pseudoazurin can be described by the Lumry-Eyring model: N --> U --> [corrected] F; the protein reversibly goes from the native (N) to the unfolded (U) state, and then irreversibly to the final (F) state. The simulation of the experimental calorimetric profiles, according to this model, allowed us to determine the thermodynamic and kinetic parameters of the two steps. The DeltaG value calculated for the Cu(II)-holo pseudoazurin is 39.2 kJ.mol(-1) at 25 degrees C. The sequence of events in the denaturation process of Cu(II)-holo pseudoazurin emergence starts with the disruption of the copper site and the hydrophobic core destabilization followed by the global protein unfolding. According to the EPR findings, the native type-1 copper ion shows type-2 copper features after the denaturation. The removal of the copper ion (apo form) significantly reduces the stability of the protein as evidenced by a DeltaG value of 16.5 kJ.mol(-1) at 25 degrees C. Moreover, the apo Paz unfolding occurs at 41.8 degrees C and is compatible with a two-state reversible process N --> [corrected] U.

Thioredoxin target proteins in chloroplast thylakoid membranes

In recent years, impressive progress has been made in the identification of thioredoxin-linked proteins. However, due to technical difficulties inherent in working with hydrophobic proteins, identifications so far have been restricted to proteins in the soluble fraction. Thus, our knowledge of redox regulated membrane proteins is quite limited. To gain information in this area, the authors have applied an adaptation of the approach based on the fluorescent thiol probe monobromobimane (mBBr) to identify redox-linked proteins of chloroplast thylakoids. By application of this procedure, 14 potential membrane-bound thioredoxin target proteins were identified, including seven new candidates functional in processes associated with photosynthetic electron flow, ATP synthesis, and Photosystem II/Photosystem I state transitions.

Structure of Cytochrome c6A, a Novel Dithio-cytochrome of Arabidopsis thaliana, and its Reactivity with Plastocyanin: Implications for Function

Cytochrome c6A is a unique dithio-cytochrome present in land plants and some green algae. Its sequence and occurrence in the thylakoid lumen suggest that it is derived from cytochrome c6, which functions in photosynthetic electron transfer between the cytochrome b6f complex and photosystem I. Its known properties, however, and a strong indication that the disulfide group is not purely structural, indicate that it has a different, unidentified function. To help in the elucidation of this function the crystal structure of cytochrome c6A from Arabidopsis thaliana has been determined in the two redox states of the heme group, at resolutions of 1.2 A (ferric) and 1.4 A (ferrous). These two structures were virtually identical, leading to the functionally important conclusion that the heme and disulfide groups do not communicate by conformational change. They also show, however, that electron transfer between the reduced disulfide and the heme is feasible. We therefore suggest that the role of cytochrome c6A is to use its disulfide group to oxidize dithiol/disulfide groups of other proteins of the thylakoid lumen, followed by internal electron transfer from the dithiol to the heme, and re-oxidation of the heme by another thylakoid oxidant. Consistent with this model, we found a rapid electron transfer between ferro-cytochrome c6A and plastocyanin, with a second-order rate constant, k2=1.2 x 10(7) M(-1) s(-1).

The ligand geometry of copper determines the stability of amicyanin

Solution differential scanning calorimetry (DSC) of oxidized amicyanin, a Type I copper protein, at pH 7.5 reveals two thermal transitions. The major transition at 67.7 degrees C corresponds to the disruption of the Cys(92) thiolate to Cu(II) charge transfer as evidenced by a corresponding temperature-dependent loss of amicyanin visible absorbance. A minor transition at 75.5 degrees C describes the further irreversible protein unfolding. Reduced amicyanin exhibits a pH-dependent change of the copper ligand geometry. At pH 8.5 where the Type I tetrahedral geometry is maintained, DSC reveals two thermal transitions with T(m) values similar to that of oxidized amicyanin. At pH 6.2 where the Cu(I) coordination is trigonal planar, reduced amicyanin exhibits a single thermal transition with a lower T(m) of 64.0 degrees C. Apoamicyanin, from which copper has been removed, also exhibits a single thermal transition but with a much lower T(m) of 51.8 degrees C. Thus, the thermal stability of amicyanin is dictated both by the presence or absence of copper and its ligand geometry, but not its redox state. The physiological relevance of these data is discussed.

Calorimetric and spectroscopic investigations of the thermal denaturation of wild type nitrite reductase

Nitrite reductase (NiR) is a multicopper protein, with a trimeric structure containing two types of copper site: type 1 is present in each subunit whereas type 2 is localized at the subunits interface. The paper reports on the thermal behaviour of wild type NiR from Alcaligenes faecalis S-6. The temperature-induced changes of the copper centres are characterized by optical spectroscopy and electron paramagnetic resonance spectroscopy, and by establishing the thermal stability by differential scanning calorimetry. The calorimetric profile of the enzyme shows a single endothermic peak with maximum heat absorption at T(m) approximately 100 degrees C, revealing an exceptional thermal stability. The thermal transition is irreversible and the scan rate dependence of the calorimetric trace indicates that the denaturation of NiR is kinetically controlled. The divergence of the activation energy values determined by different methods is used as a criterion for the inapplicability of the one-step irreversible model. The best fit of the DSC profiles is obtained when the classical Lumry-Eyring model, N<-->U-->F, is considered. The simulation results indicate that the irreversible step prevails on the reversible one. Moreover, it is found that the conformational changes within the type-1 copper environments precede the denaturation of the whole protein. No evidence of protein dissociation within the temperature range investigated was observed.

An NMR view of the unfolding process of rusticyanin: Structural elements that maintain the architecture of a beta-barrel metalloprotein

The unfolding process of the blue copper protein rusticyanin (Rc) as well as its dynamic and D(2)O/H(2)O exchange properties in an incipient unfolded state have been studied by heteronuclear NMR spectroscopy. Titrations of apo, Cu(I), and Cu(II)Rc with guanidinium chloride (GdmCl) show that the copper ion stabilizes the folded species and remains bound in the completely unfolded state. The oxidized state of the copper ion is more efficient than the reduced form in this respect. The long loop of Rc (where the first ligand of the copper ion is located) is one of the most mobile domains of the protein. This region has no defined secondary structure elements and is prone to exchange its amide protons. In contrast, the last loop (including a short alpha-helix) and the last beta-strand (where the other three ligands of the metal ion are located) form the most rigid domain of the protein. The results taken as a whole suggest that the first ligand detaches from the metal ion when the protein unfolds, while the other three ligands remain bound to it. The implications of these findings for the biological folding process of Rc are also discussed.

In vivo photosystem I reduction in thermophilic and mesophilic cyanobacteria: The thermal resistance of the process is limited by factors other than the unfolding of the partners

Photosystem I reduction by plastocyanin and cytochrome c(6) in cyanobacteria has been extensively studied in vitro, but much less information is provided on this process inside the cell. Here, we report an analysis of the electron transfer from both plastocyanin and cytochrome c(6) to photosystem I in intact cells of several cyanobacterial species, including a comparative study of the temperature effect in mesophilic and thermophilic organisms. Our data show that cytochrome c(6) reduces photosystem I by following a reaction mechanism involving complex formation, whereas the copper-protein follows a simpler collisional mechanism. These results contrast with previous kinetic studies in vitro. The effect of temperature on photosystem I reduction leads us to conclude that the thermal resistance of this process is determined by factors other than the proper stability of the protein partners.

Comparative study of the stability of poplar plastocyanin isoforms

The stability of the two isoforms of poplar plastocyanin (PCa and PCb) was studied with differential scanning calorimetry (DSC) technique. It was shown that the thermal unfolding of both isoforms is an irreversible process with two endothermic and one exothermic peaks. The melting temperature of PCb was found to be 1.3+/-0.2 K degrees higher than of PCa, which indicates that PCb is more stable. The enthalpy of unfolding was estimated from the heat capacity curves and was found to be significantly higher for PCb at salt concentration I=0.1 M. In addition, PCb unfolding enthalpy and melting temperature are much more sensitive to the changes in the salt concentration as found in the experiments done at different ionic strength. The experiments were complemented with numerical calculations. The salt effect on the stability was modeled using the X-ray structure of PCa and a homology modeled structure of PCb. It was found, in agreement with the experimental data, that the stability of PCb changes by 4.7 kJ more than PCa, as the salt concentration increases from zero to 0.1 M. Thus, the differences in only 12 amino acid positions between "a" and "b" isoforms result in a measurable difference in the folding enthalpy and a significant difference in the salt dependence. The optimization of the electrostatic energies of PCa and PCb were studied and it was shown that PCb is better electrostatically optimized.

Unfolding process of rusticyanin: evidence of protein aggregation

The unfolding process of the Blue Copper Protein (BCP) rusticyanin (Rc) has been studied using a wide variety of biochemical techniques. Fluorescence and CD spectroscopies reveal that the copper ion plays an essential role in stabilizing the protein and that the oxidized form is more efficient than the reduced species in this respect. The addition of guanidinium chloride to Rc samples produces aggregation of the protein. Gel filtration chromatography and glutaraldehyde cross-linking experiments confirm the formation of such aggregates. Among the BCPs, this feature is exclusive to Rc. The aggregation could be related to the large molecular mass and large number of hydrophobic residues of this protein compared with those of other BCPs.

Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin

A comparative study of the thermal stability of wild type poplar plastocyanin and of a mutant form containing a disulfide bridge between residues 21 and 25 was performed using differential scanning calorimetry and optical spectroscopic techniques. For wild type plastocyanin the transition temperature, determined from the calorimetric profiles, is 62.7 degrees C at the scan rate of 60 degrees C/h, whereas for the mutant it is reduced to 58.0 degrees C. In both cases, the endothermic peak is followed by an exothermic one at higher temperatures. The unfolding process monitored by optical absorption at 596 nm also reveals a reduced thermal stability of the mutated plastocyanin compared to the wild type protein, with transition temperatures of 54.8 and 58.0 degrees C, respectively. For both proteins, the denaturation process was found to be irreversible and dependent on the scan rate preventing the thermodynamic analysis of the unfolding process. In parallel, small conformational changes between wild type and mutant plastocyanin emerge from fluorescence spectroscopy measurements. Here, a difference in the interaction of the two proteins between the microenvironment surrounding the fluorophores and the solvent was proposed. The destabilization observed in the disulfide containing mutant of plastocyanin suggests that the double mutation, Ile21Cys and Glu25Cys, introduces strain into the protein which offsets the stabilizing effect expected from the formation of a covalent crosslink.