Effect of phosphorothioate chirality on i-motif structure and stability

Stronger Adsorption of Phosphorothioate DNA Oligonucleotides on Graphene Oxide by van der Waals Forces

Finding DNA sequences that can adsorb strongly on nanomaterials is critical for bioconjugate and biointerface chemistry. In most previous work, unmodified DNA with a phosphodiester backbone (PO DNA) were screened or selected for adsorption on inorganic surfaces. In this work, the adsorption of phosphorothioate (PS)-modified DNA (PS DNA) on graphene oxide (GO) is studied. By use of fluorescently labeled oligonucleotides as probes, all the tested PS DNA strands are adsorbed more strongly on GO compared to the PO DNA of the same sequence. The adsorption mechanism is probed by washing the adsorbed DNA with proteins, surfactants, and urea. Molecular dynamics simulations show that van der Waals forces are responsible for the tighter adsorption of PS DNA. Polycytosine (poly-C) DNA, in general, has a high affinity for the GO surface, and PS poly-C DNA can adsorb even stronger, making it an ideal anchoring sequence on GO. With this knowledge, noncovalent functionalization of GO with a diblock DNA is demonstrated, where a PS poly-C block is used to anchor on the surface. This conjugate achieves better hybridization than the PO DNA of the same sequence for hybridization with the complementary DNA.

i-Motif DNA: structural features and significance to cell biology

The i-motif represents a paradigmatic example of the wide structural versatility of nucleic acids. In remarkable contrast to duplex DNA, i-motifs are four-stranded DNA structures held together by hemi- protonated and intercalated cytosine base pairs (C:C⁺). First observed 25 years ago, and considered by many as a mere structural oddity, interest in and discussion on the biological role of i-motifs have grown dramatically in recent years. In this review we focus on structural aspects of i-motif formation, the factors leading to its stabilization and recent studies describing the possible role of i-motifs in fundamental biological processes.

Stabilization of an intermolecular i-motif by lipid modification of cytosine-oligodeoxynucleotides

This paper describes the stabilization of an intermolecular i-motif by lipophilic modification on the 3'-terminus of oligonucleotides. The hydrophobic aliphatic chain connected at the 3'-terminus of a trinucleotide (dC)3 promoted the formation of an i-motif and significantly enhanced the quadruplex's stability. The impact of lipophilic modification on i-motif's thermal stability was studied by UV-thermal denaturation melting experiments and isothermal titration calorimetry. We found that alkyl chains containing more than 14 carbon atoms could elevate the i-motif structure's stability in a wide range of pH and concentrations.

The effect of the neutral cytidine protonated analogue pseudoisocytidine on the stability of i-motif structures

Incorporation of pseudoisocytidine (psC), a neutral analogue of protonated cytidine, in i-motifs has been studied by spectroscopic methods. Our results show that neutral psC:C base pairs can stabilize i-motifs at neutral pH, but the stabilization only occurs when psC:C base pairs are located at the ends of intercalated C:C⁺ stacks. When psC occupies central positions, the resulting i-motifs are only observed at low pH and psC:C⁺ or psC:psC⁺ hemiprotonated base pairs are formed instead of their neutral analogs. Overall, our results suggest that positively charged base pairs are necessary to stabilize this non-canonical DNA structure.

Stabilization of i-motif structures by 2'-β-fluorination of DNA

i-Motifs are four-stranded DNA structures consisting of two parallel DNA duplexes held together by hemi-protonated and intercalated cytosine base pairs (C:CH⁺). They have attracted considerable research interest for their potential role in gene regulation and their use as pH responsive switches and building blocks in macromolecular assemblies. At neutral and basic pH values, the cytosine bases deprotonate and the structure unfolds into single strands. To avoid this limitation and expand the range of environmental conditions supporting i-motif folding, we replaced the sugar in DNA by 2-deoxy-2-fluoroarabinose. We demonstrate that such a modification significantly stabilizes i-motif formation over a wide pH range, including pH 7. Nuclear magnetic resonance experiments reveal that 2-deoxy-2-fluoroarabinose adopts a C2′-endo conformation, instead of the C3′-endo conformation usually found in unmodified i-motifs. Nevertheless, this substitution does not alter the overall i-motif structure. This conformational change, together with the changes in charge distribution in the sugar caused by the electronegative fluorine atoms, leads to a number of favorable sequential and inter-strand electrostatic interactions. The availability of folded i-motifs at neutral pH will aid investigations into the biological function of i-motifs in vitro, and will expand i-motif applications in nanotechnology.

i-Motif DNA: structure, stability and targeting with ligands

i-Motifs are four-stranded DNA secondary structures which can form in sequences rich in cytosine. Stabilised by acidic conditions, they are comprised of two parallel-stranded DNA duplexes held together in an antiparallel orientation by intercalated, cytosine-cytosine(+) base pairs. By virtue of their pH dependent folding, i-motif forming DNA sequences have been used extensively as pH switches for applications in nanotechnology. Initially, i-motifs were thought to be unstable at physiological pH, which precluded substantial biological investigation. However, recent advances have shown that this is not always the case and that i-motif stability is highly dependent on factors such as sequence and environmental conditions. In this review, we discuss some of the different i-motif structures investigated to date and the factors which affect their topology, stability and dynamics. Ligands which can interact with these structures are necessary to aid investigations into the potential biological functions of i-motif DNA and herein we review the existing i-motif ligands and give our perspective on the associated challenges with targeting this structure.

Design, synthesis, biophysical and primer extension studies of novel acyclic butyl nucleic acid (BuNA)

A novel nucleic acid analogue called acyclic (S)-butyl nucleic acid (BuNA) composed of an acyclic backbone containing a phosphodiester linkage and bearing natural nucleobases was synthesized. Next, (S)-BuNA nucleotides were incorporated in DNA strands and their effect on duplex stability and changes in structural conformation were investigated. Circular dichroism (CD), UV-melting and non-denatured gel electrophoresis (native PAGE) studies revealed that (S)-BuNA is capable of making duplexes with its complementary strands and integration of (S)-BuNA nucleotides into DNA duplex does not alter the B-type-helical structure of the duplex. Furthermore, (S)-BuNA oligonucleotides and (S)-BuNA substituted DNA strands were studied as primer extensions by DNA polymerases. This study revealed that the acyclic scaffold is tolerated by enzymes and is therefore to some extent biocompatible.

Fundamental aspects of the nucleic acid i-motif structures

The latest research on fundamental aspects of i-motif structures is reviewed with special attention to their hypothetical rolein vivo.

Stabilization and induction of oligonucleotide i-motif structure via graphene quantum dots

DNA i-motif structures have been found in telomeric, centromeric DNA and many in the promoter region of oncogenes; thus they might be attractive targets for gene-regulation processes and anticancer therapeutics. We demonstrate in this work that i-motif structures can be stabilized by graphene quantum dots (GQDs) under acidic conditions, and more importantly GQDs can promote the formation of the i-motif structure under alkaline or physiological conditions. We illustrate that the GQDs stabilize the i-motif structure through end-stacking of the bases at its loop regions, thus reducing its solvent-accessible area. Under physiological or alkaline conditions, the end-stacking of GQDs on the unfolded structure shifts the equilibrium between the i-motif and unfolded structure toward the i-motif structure, thus promoting its formation. The possibility of fine-tuning the stability of the i-motif and inducing its formation would make GQDs useful in gene regulation and oligonucleotide-based therapeutics.

The energetics of i-DNA tetraplex structures formed intermolecularly by d(TC5) and intramolecularly by d[(C5T3)3C5]

Cytosine-rich DNA at low pH adopts an antiparallel tetraplex structure via the intercalation of two partially protonated, parallel stranded duplexes. This intriguing structural motif has been named i-DNA. We have used a combination of spectroscopic and calorimetric techniques to characterize the properties of an intermolecular i-DNA formed by d(TC(5)) and an intramolecular i-DNA formed by d[(C(5)T(3))(3)C(5)]. Our measurements reveal that both i-DNA complexes are enthalpically stabilized by 6.5-7.0 kcal/mol(base) and entropically destabilized by 20 cal/mol(base)/K. These values are about 50% larger than the corresponding enthalpy and entropy values per base for Watson and Crick duplexes and for Hoogsteen triplexes, while being similar to per base enthalpy and entropy values reported for G-quadruplexes. Our data also reveal a positive heat capacity change between 20 and 30 cal/mol(base)/K, values similar to that reported for polymeric Watson & Crick DNA duplexes. Solution-dependent studies reveal the overall thermal and thermodynamic stability of i-DNA complexes to be dictated by an interplay between pH and ionic strength. Based on the thermodynamic data measured, we discuss the feasibility of i-DNA formation in the context of conventional DNA sequences, while commenting on potential roles for this structural motif in biological regulatory mechanisms.

Neuromuscular therapeutics by RNA-targeted suppression of ACHE gene expression

RNA-targeted therapeutics offers inherent advantages over small molecule drugs wherever one out of several splice variant enzymes should be inhibited. Here, we report the use of Monarsen, a 20-mer acetylcholinesterase-targeted antisense agent with three 3'-2'o-methyl-protected nucleotides, for selectively attenuating the stress-induced accumulation of the normally rare, soluble "readthrough" acetylcholinesterase variant AChE-R. Acetylcholine hydrolysis by AChE-R may cause muscle fatigue and moreover, limit the cholinergic anti-inflammatory blockade, yielding inflammation-associated pathology. Specific AChE-R targeting by Monarsen was achieved in cultured cells, experimental animals, and patient volunteers. In rats with experimental autoimmune myasthenia gravis, oral delivery of Monarsen improved muscle action potential in a lower dose regimen (nanomolar versus micromolar), rapid and prolonged manner (up to 72 h versus 2-4 h) as compared with the currently used small molecule anticholinesterases. In central nervous system neurons of both rats and cynomolgus monkeys, systematic Monarsen treatment further suppressed the levels of the proinflammatory cytokines interleukin-1 (IL-1) and IL-6. Toxicology testing and ongoing clinical trials support the notion that Monarsen treatment would offer considerable advantages over conventional cholinesterase inhibitors with respect to dosing, specificity, side effects profile, and duration of efficacy, while raising some open questions regarding its detailed mechanism of action.

A proposal for a convenient notation for P-chiral nucleotide analogues. Part 2. Dinucleoside monophosphate analogues

A configuration of ligands around a phosphorus atom in P-chiral dinucleoside monophosphate analogues can be described using DP/LP stereochemical notation, which allows immediate correlation between the notation of configuration and the actual spatial arrangement of the phosphorus ligands. The area of applications of this new stereochemical nomenclature covers dinucleoside units bridged by virtually any type of tri-and tetra-coordinated phosphorus moieties, that is, phosphorothioates, phosphoramidates, phosphoramidites, boranephosphates, methanephosphonates, H-phosphonates, and many others.