Correlation between AcrB trimer association affinity and efflux activity

Hydrophobic moment drives penetration of bacterial membranes by transmembrane peptides

With antimicrobial resistance (AMR) remaining a persistent and growing threat to human health worldwide, membrane-active peptides are gaining traction as an alternative strategy to overcome the issue. Membrane-embedded multi-drug resistant (MDR) efflux pumps are a prime target for membrane-active peptides, as they are a well-established contributor to clinically relevant AMR infections. Here, we describe a series of transmembrane peptides (TMs) to target the oligomerization motif of the AcrB component of the AcrAB-TolC MDR efflux pump from Escherichia coli. These peptides contain an N-terminal acetyl-A-(Sar)3 (sarcosine; N-methylglycine) tag and a C-terminal lysine tag-a design strategy our lab has utilized to improve the solubility and specificity of targeting for TMs previously. While these peptides have proven useful in preventing AcrB-mediated substrate efflux, the mechanisms by which these peptides associate with and penetrate the bacterial membrane remained unknown. In this study, we have shown peptide hydrophobic moment (μH)-the measure of concentrated hydrophobicity on one face of a lipopathic α-helix-drives bacterial membrane permeabilization and depolarization, likely through lateral-phase separation of negatively-charged POPG lipids and the disruption of lipid packing. Our results show peptide μH is an important consideration when designing membrane-active peptides and may be the determining factor in whether a TM will function in a permeabilizing or non-permeabilizing manner when embedded in the bacterial membrane.

How physical forces drive the process of helical membrane protein folding

Protein folding is a fundamental process of life with important implications throughout biology. Indeed, tens of thousands of mutations have been associated with diseases, and most of these mutations are believed to affect protein folding rather than function. Correct folding is also a key element of design. These factors have motivated decades of research on protein folding. Unfortunately, knowledge of membrane protein folding lags that of soluble proteins. This gap is partly caused by the greater technical challenges associated with membrane protein studies, but also because of additional complexities. While soluble proteins fold in a homogenous water environment, membrane proteins fold in a setting that ranges from bulk water to highly charged to apolar. Thus, the forces that drive folding vary in different regions of the protein, and this complexity needs to be incorporated into our understanding of the folding process. Here, we review our understanding of membrane protein folding biophysics. Despite the greater challenge, better model systems and new experimental techniques are starting to unravel the forces and pathways in membrane protein folding.

Structure, Assembly, and Function of Tripartite Efflux and Type 1 Secretion Systems in Gram-Negative Bacteria

Tripartite efflux pumps and the related type 1 secretion systems (T1SSs) in Gram-negative organisms are diverse in function, energization, and structural organization. They form continuous conduits spanning both the inner and the outer membrane and are composed of three principal components-the energized inner membrane transporters (belonging to ABC, RND, and MFS families), the outer membrane factor channel-like proteins, and linking the two, the periplasmic adaptor proteins (PAPs), also known as the membrane fusion proteins (MFPs). In this review we summarize the recent advances in understanding of structural biology, function, and regulation of these systems, highlighting the previously undescribed role of PAPs in providing a common architectural scaffold across diverse families of transporters. Despite being built from a limited number of basic structural domains, these complexes present a staggering variety of architectures. While key insights have been derived from the RND transporter systems, a closer inspection of the operation and structural organization of different tripartite systems reveals unexpected analogies between them, including those formed around MFS- and ATP-driven transporters, suggesting that they operate around basic common principles. Based on that we are proposing a new integrated model of PAP-mediated communication within the conformational cycling of tripartite systems, which could be expanded to other types of assemblies.

A protet-based, protonic charge transfer model of energy coupling in oxidative and photosynthetic phosphorylation

Textbooks of biochemistry will explain that the otherwise endergonic reactions of ATP synthesis can be driven by the exergonic reactions of respiratory electron transport, and that these two half-reactions are catalyzed by protein complexes embedded in the same, closed membrane. These views are correct. The textbooks also state that, according to the chemiosmotic coupling hypothesis, a (or the) kinetically and thermodynamically competent intermediate linking the two half-reactions is the electrochemical difference of protons that is in equilibrium with that between the two bulk phases that the coupling membrane serves to separate. This gradient consists of a membrane potential term Δψ and a pH gradient term ΔpH, and is known colloquially as the protonmotive force or pmf. Artificial imposition of a pmf can drive phosphorylation, but only if the pmf exceeds some 150-170mV; to achieve in vivo rates the imposed pmf must reach 200mV. The key question then is 'does the pmf generated by electron transport exceed 200mV, or even 170mV?' The possibly surprising answer, from a great many kinds of experiment and sources of evidence, including direct measurements with microelectrodes, indicates it that it does not. Observable pH changes driven by electron transport are real, and they control various processes; however, compensating ion movements restrict the Δψ component to low values. A protet-based model, that I outline here, can account for all the necessary observations, including all of those inconsistent with chemiosmotic coupling, and provides for a variety of testable hypotheses by which it might be refined.

Peptide-Based Approach to Inhibition of the Multidrug Resistance Efflux Pump AcrB

Clinically relevant multidrug-resistant bacteria often arise due to overproduction of membrane-embedded efflux proteins that are capable of pumping antibiotics out of the bacterial cell before the drugs can exert their intended toxic effect. The Escherichia coli membrane protein AcrB is the archetypal protein utilized for bacterial efflux study because it can extrude a diverse range of antibiotic substrates and has close homologues in many Gram-negative pathogens. Three AcrB subunits, each of which contains 12 transmembrane (TM) helices, are known to trimerize to form the minimal functional unit, stabilized noncovalently by helix-helix interactions between TM1 and TM8. To inhibit the efflux activity of AcrB, we have rationally designed synthetic peptides aimed at destabilizing the AcrB trimerization interface by outcompeting the subunit interaction sites within the membrane. Here we report that peptides mimicking TM1 or TM8, with flanking N-terminal peptoid tags, and C-terminal lysine tags that aid in directing the peptides to their membrane-embedded target, decrease the AcrB-mediated efflux of the fluorescent substrate Nile red and potentiate the effect of the antimicrobials chloramphenicol and ethidium bromide. To further characterize the motif encompassing the interaction between TM1 and TM8, we used Förster resonance energy transfer to demonstrate dimerization. Using the TM1 and TM8 peptides, in conjunction with several selected mutant peptides, we highlight residues that may increase the potency and specificity of the peptide drug candidates. In targeting membrane-embedded protein-protein interactions, this work represents a novel approach to AcrB inhibition and, more broadly, a potential route to a new category of efflux pump inhibitors.

Molecular modelling and competitive inhibition of a Mycobacterium tuberculosis multidrug-resistance efflux pump

Tuberculosis is a major cause of mortality and morbidity in developing countries, and the emergency of multidrug and extensive drug resistance cases is an utmost issue on the control of the disease. Despite the efforts on the development of new antibiotics, eventually there will be strains resistant to them as well. Efflux plays an important role in the evolution of resistance in Mycobacterium tuberculosis. Tap is an important efflux pump associated with tuberculosis resistant to isoniazid, rifampicine and ofloxacin and with multidrug resistance. The development of efflux inhibitors for Tap could raise the effectiveness of second line drugs and reduce the duration of the current treatment. Therefore the objective of this study is to build a reliable molecular model of Tap efflux pump and test the possible competitive inhibition between efflux inhibitors and antibiotics in the optimized structure. We built twenty five Tap models with molecular modelling to elect the best according to the results of the validation analysis. The elected model went through to a 100 ns molecular dynamics simulation in a lipid bilayer, and the resulting optimized structure was used in docking studies to test if the used efflux inhibitors may act via competitive inhibition on antibiotics. The validation results pointed the model built by Phyre2 as the closest to a possible native Tap structure, and therefore it was the elected model. RSMD analysis revealed the model is stable, where the predicted binding site stabilized between 15 and 20 ns, maintaining the RMSD at around 0.35 Å throughout the molecular dynamics simulation in a lipid bilayer. Therefore this model is reliable and can also be used for further studies. The docking studies showed a possibility of competitive inhibition by NUNL02 on ofloxacin and bedaquiline, and by verapamil on ofloxacin and rifampicin. This presents the possibility that NUNL02 and verapamil are possible inhibitors of Tap efflux and highlights the importance of including efflux inhibitors as adjuvants to the tuberculosis therapy, as it indicates a possible extrusion of ofloxacin, rifampicin and bedaquilin by Tap.

Interaction of ethidium and tetraphenylphosphonium cations with Salmonella enterica cells

BACKGROUND AND OBJECTIVE

One of the main causes of bacterial resistance to antimicrobials is multidrug resistance induced by the increased efficiency of the efflux pumps. In this study we analyzed how the conditions of assay affect the efflux of indicator substrates ethidium (Et⁺) and tetraphenylphosphonium (TPP⁺) in Salmonella enterica ser. Typhimurium cells. Impact of the outer membrane permeability barrier, composition and temperature of the medium on accumulation of the indicator compounds also was analyzed.

MATERIALS AND METHODS

The fluorescence of Et⁺ and Nile Red was measured using 96-well plates and a plate reader. In parallel to traditional studies of fluorescence we applied a constructed selective electrode to follow the accumulation of Et⁺ in S. enterica cells. Simultaneously with monitoring of Et⁺ concentration in the cell incubation medium, electrochemical measurements of TPP⁺ accumulation were performed. Furthermore, Et⁺ and TPP⁺ were used within the same sample as agents competing for the interaction with the efflux pumps. An inhibitor phenylalanyl-arginyl-β-naphtylamide (PAβN) was applied to evaluate the input of RND-family pumps in the total efflux of these indicator compounds.

RESULTS

S. enterica cells with the intact outer membrane (OM) bound very low amounts of Et⁺ or TPP⁺. Cells with the permeabilized OM accumulate considerably higher amounts of the indicator compounds at pH 8.0, but only Et⁺ was considerably accumulated at pH 6.5. At conditions of electrochemical monitoring accumulation of Et⁺ by the permeabilized cells at 37°C was considerably faster than at 23°C, but at the higher temperature most of the cell-accumulated Et⁺ was extruded back to the medium. The fluorescence of Et⁺ in suspension of cells incubated in 400mmol/L Tris buffer was about twice higher compared to 100mmol/L one. The inhibitory action of TPP⁺ on Et⁺ efflux was evident only in 400mmol/L Tris although PAβN effectively increased Et⁺ fluorescence at both buffer concentrations.

CONCLUSIONS

Results of our experiments indicate that ionic strength of the incubation medium influence the selectivity, the medium temperature and the assay conditions impact the kinetics of efflux. The lower accumulated amount and the weaker fluorescence of Et⁺ registered in slightly acidic medium indicate that ΔΨ plays a role in the accumulation of this indicator cation. The bound amount of Et⁺ to the de-energized or permeabilized cells considerably varies depending on the conditions and methods of de-energization or permeabilization of cells. Tris/EDTA permeabilization of the cells does not inhibit the efflux.

The ssrA-Tag Facilitated Degradation of an Integral Membrane Protein

ATP-dependent degradation plays a critical role in the quality control and recycling of proteins in cells. However, complete degradation of membrane proteins by ATP-dependent proteases in bacteria is not well-studied. We discovered that the degradation of a multidomain and multispan integral membrane protein AcrB could be facilitated by the introduction of a ssrA-tag at the C-terminus of the protein sequence and demonstrated that the cytoplasmic unfoldase-protease complex ClpXP was involved in the degradation. This is the first report to our knowledge to reveal that the ClpXP complex is capable of degrading integral membrane proteins. The chaperone SspB also played a role in the degradation. Using purified proteins, we demonstrated that the addition of the ssrA-tag did not drastically affect the structure of AcrB, and the degradation of detergent solubilized AcrB by purified ClpXP could be observed in vitro.

Cysteine residue is not essential for CPM protein thermal-stability assay

A popular thermal-stability assay developed especially for the study of membrane proteins uses a thiol-specific probe, 7-diethylamino-3-(4-maleimidophenyl)-4-methylcoumarin (CPM). The fluorescence emission of CPM surges when it forms a covalent bond with the side chain of a free Cys, which becomes more readily accessible upon protein thermal denaturation. Interestingly, the melting temperatures of membrane proteins determined using the CPM assay in literature are closely clustered in the temperature range 45-55 °C. A thorough understanding of the mechanism behind the observed signal change is critical for the accurate interpretation of the protein unfolding. Here we used two α-helical membrane proteins, AqpZ and AcrB, as model systems to investigate the nature of the fluorescence surge in the CPM assay. We found that the transition temperatures measured using circular-dichroism (CD) spectroscopy and the CPM assay were significantly different. To eliminate potential artifact that might arise from the presence of detergent, we monitored the unfolding of two soluble proteins. We found that, contrary to current understanding, the presence of a sulfhydryl group was not a prerequisite for the CPM thermal-stability assay. The observed fluorescence increase is probably caused by binding of the fluorophore to hydrophobic patches exposed upon protein unfolding.