Trapping an intermediate of dinitrogen (N2) reduction on nitrogenase

Low-temperature trapping of N2 reduction reaction intermediates in nitrogenase MoFe protein-CdS quantum dot complexes

The biological reduction of N2 to ammonia requires the ATP-dependent, sequential delivery of electrons from the Fe protein to the MoFe protein of nitrogenase. It has been demonstrated that CdS nanocrystals can replace the Fe protein to deliver photoexcited electrons to the MoFe protein. Herein, light-activated electron delivery within the CdS:MoFe protein complex was achieved in the frozen state, revealing that all the electron paramagnetic resonance (EPR) active E-state intermediates in the catalytic cycle can be trapped and characterized by EPR spectroscopy. Prior to illumination, the CdS:MoFe protein complex EPR spectrum was composed of a S = 3/2 rhombic signal (g = 4.33, 3.63, and 2.01) consistent with the FeMo-cofactor in the resting state, E0. Illumination for sequential 1-h periods at 233 K under 1 atm of N2 led to a cumulative attenuation of E0 by 75%. This coincided with the appearance of S = 3/2 and S = 1/2 signals assigned to two-electron (E2) and four-electron (E4) reduced states of the FeMo-cofactor, together with additional S = 1/2 signals consistent with the formation of E6 and E8 states. Simulations of EPR spectra allowed quantification of the different E-state populations, along with mapping of these populations onto the Lowe-Thorneley kinetic scheme. The outcome of this work demonstrates that the photochemical delivery of electrons to the MoFe protein can be used to populate all of the EPR active E-state intermediates of the nitrogenase MoFe protein cycle.

Cryo-annealing of Photoreduced CdS Quantum Dot-Nitrogenase MoFe Protein Complexes Reveals the Kinetic Stability of the E4(2N2H) Intermediate

A critical step in the mechanism of N2 reduction to 2NH3 catalyzed by the enzyme nitrogenase is the reaction of the four-electron/four-proton reduced intermediate state of the active-site FeMo-cofactor (E4(4H)). This state is a junction in the catalytic mechanism, either relaxing by the reaction of a metal bound Fe-hydride with a proton forming H2 or going forward with N2 binding coupled to the reductive elimination (re) of two Fe-hydrides as H2 to form the E4(2N2H) state. E4(2N2H) can relax to E4(4H) by the oxidative addition (oa) of H2 and release of N2 or can be further reduced in a series of catalytic steps to release 2NH3. If the H2 re/oa mechanism is correct, it requires that oa of H2 be associative with E4(2N2H). In this report, we have taken advantage of CdS quantum dots in complex with MoFe protein to achieve photodriven electron delivery in the frozen state, with cryo-annealing in the dark, to reveal details of the E-state species and to test the stability of E4(2N2H). Illumination of frozen CdS:MoFe protein complexes led to formation of a population of reduced intermediates. Electron paramagnetic resonance spectroscopy identified E-state signals including E2 and E4(2N2H), as well as signals suggesting the formation of E6 or E8. It is shown that in the frozen state when pN2 is much greater than pH2, the E4(2N2H) state is kinetically stable, with very limited forward or reverse reaction rates. These results establish that the oa of H2 to the E4(2N2H) state follows an associative reaction mechanism.

Rnf1 is the primary electron source to nitrogenase in a high-ammonium-accumulating strain of Azotobacter vinelandii

The enzyme nitrogenase performs the process of biological nitrogen fixation (BNF), converting atmospheric dinitrogen gas into the biologically accessible ammonia, which is rapidly protonated at physiological pH to yield ammonium. The reduction of dinitrogen requires both ATP and electrons. Azotobacter vinelandii is an aerobic nitrogen-fixing microbe that is a model organism for the study of BNF. Previous reports have described strains of A. vinelandii that are partially deregulated for BNF, resulting in the release of large quantities of ammonium into the growth medium. Determining the source of the electrons required to drive BNF is complicated by the existence of several protein complexes in A. vinelandii that have been linked to BNF in other species. In this work, we used the high-ammonium-accumulating strains of A. vinelandii to probe the source of electrons to nitrogenase by disrupting the Rnf1 and Fix complexes. The results of this work demonstrate the potential of these strains to be used as a tool to investigate the contributions of other enzymes or complexes in the process of BNF. These results provide strong evidence that the Rnf1 complex of A. vinelandii is the primary source of electrons delivered to the nitrogenase enzyme in this partially deregulated strain. The Fix complex under native regulation was unable to provide sufficient electrons to accumulate extracellular ammonium in the absence of the Rnf1 complex. Increased ammonium accumulation could be attained in a strain lacking the Rnf1 complex if the genes of the Fix protein complex were relocated behind the strong promoter of the S-layer protein but still failed to achieve the levels found with just the Rnf1 complex by itself. KEY POINTS: • The Rnf1 complex is integral to ammonium accumulation in A. vinelandii. • The Fix complex can be deleted and still achieve ammonium accumulation in A. vinelandii. • A. vinelandii can be engineered to increase the contribution of the Fix complex to ammonium accumulation.

Dual Iron Sites in Activation of N2 by Iron-Sulfur Cluster Anions Fe5S2- and Fe5S3. J Phys Chem Lett 2021;12:9269-9274. [PMID: 34533969 DOI: 10.1021/acs.jpclett.1c02683]

Inspired by the fact that the active centers of natural nitrogenases are polynuclear iron-sulfur clusters, the reactivity of isolated iron-sulfur clusters toward N₂ has received considerable attention to gain fundamental insights into the activation of the N≡N triple bond. Herein, a series of gas-phase iron-sulfur cluster anions Fe_xS_y^- (x = 1-8, y = 0-x) were prepared and their reactivities toward N₂ were investigated systematically by mass spectrometry. Among the 44 investigated clusters, only Fe₅S₂^- and Fe₅S₃^- showed superior reactivity toward N₂. Theoretical results revealed that N₂ binds molecularly to the iron sites of Fe₅S_2,3^- in a common end-on coordination mode with an unprecedented back-donation interaction from the localized d-d bonding orbitals of Fe-Fe sites to the π* antibonding orbitals of N₂. This is the first example to disclose the significant contribution of the dual metal sites rather than the single metal atom to N₂ adsorption in the prevalent end-on binding mode.

Cleavage of cluster iron-sulfide bonds in cyclophane-coordinated FenSm complexes

Reaction of the tri(μ-sulfido)triiron(iii) tris(β-diketiminate) cyclophane complex, Fe3S3LEt/Me (1), or of the di(μ-sulfido)diiron(iii) complex Fe2S2HLEt/Me (5), with the related tri(bromide)triiron(ii) complex Fe3Br3LEt/Me (2) results in electron and ligand redistribution to yield the mixed-ligand multiiron complexes, including Fe3Br2SLEt/Me (3) and Fe2Br2SHLEt/Me (4). The cleavage and redistribution observed in these complexes is reminiscent of necessary Fe-S bond cleavage for substrate activation in nitrogenase enzymes, and provides a new perspective on the lability of Fe-S bonds in FeS clusters.

The Spectroscopy of Nitrogenases

Nitrogenases are responsible for biological nitrogen fixation, a crucial step in the biogeochemical nitrogen cycle. These enzymes utilize a two-component protein system and a series of iron-sulfur clusters to perform this reaction, culminating at the FeMco active site (M = Mo, V, Fe), which is capable of binding and reducing N2 to 2NH3. In this review, we summarize how different spectroscopic approaches have shed light on various aspects of these enzymes, including their structure, mechanism, alternative reactivity, and maturation. Synthetic model chemistry and theory have also played significant roles in developing our present understanding of these systems and are discussed in the context of their contributions to interpreting the nature of nitrogenases. Despite years of significant progress, there is still much to be learned from these enzymes through spectroscopic means, and we highlight where further spectroscopic investigations are needed.

Key factors affecting ammonium production by an Azotobacter vinelandii strain deregulated for biological nitrogen fixation

Background

The obligate aerobe Azotobacter vinelandii is a model organism for the study of biological nitrogen fixation (BNF). This bacterium regulates the process of BNF through the two component NifL and NifA system, where NifA acts as an activator, while NifL acts as an anti-activator based on various metabolic signals within the cell. Disruption of the nifL component in the nifLA operon in a precise manner results in a deregulated phenotype that produces levels of ammonium that far surpass the requirements within the cell, and results in the release of up to 30 mM of ammonium into the growth medium. While many studies have probed the factors affecting growth of A. vinelandii, the features important to maximizing this high-ammonium-releasing phenotype have not been fully investigated.

Results

In this work, we report the effect of temperature, medium composition, and oxygen requirements on sustaining and maximizing elevated levels of ammonium production from a nitrogenase deregulated strain. We further investigated several pathways, including ammonium uptake through the transporter AmtB, which could limit yields through energy loss or futile recycling steps. Following optimization, we compared sugar consumption and ammonium production, to attain correlations and energy requirements to drive this process in vivo. Ammonium yields indicate that between 5 and 8% of cellular protein is fully active nitrogenase MoFe protein (NifDK) under these conditions.

Conclusions

These findings provide important process optimization parameters, and illustrate that further improvements to this phenotype can be accomplished by eliminating futile cycles.

Addressing Ligand-Based Redox in Molybdenum-Dependent Methionine Sulfoxide Reductase

A combination of pulsed EPR, CW EPR, and X-ray absorption spectroscopies has been employed to probe the geometric and electronic structure of the E. coli periplasmic molybdenum-dependent methionine sulfoxide reductase (MsrP). ¹⁷O and ¹H pulsed EPR spectra show that the as-isolated Mo(V) enzyme form does not possess an exchangeable H₂O/OH^- ligand bound to Mo as found in the sulfite oxidizing enzymes of the same family. The nature of the unusual CW EPR spectrum has been re-evaluated in light of new data on the MsrP-N45R variant and related small-molecule analogues of the active site. These data point to a novel "thiol-blocked" [(PDT)Mo^VO(S_Cys)(thiolate)]^- structure, which is supported by new EXAFS data. We discuss these new results in the context of ligand-based and metal-based redox chemistry in the enzymatic oxygen atom transfer reaction.

A model for dinitrogen binding in the E4 state of nitrogenase

Molybdenum nitrogenase is one of the most intriguing metalloenzymes in nature, featuring an exotic iron-molybdenum-sulfur cofactor, FeMoco, whose mode of action remains elusive. In particular, the molecular and electronic structure of the N2-binding E4 state is not known. In this study we present theoretical QM/MM calculations of new structural models of the E4 state of molybdenum-dependent nitrogenase and compare to previously suggested models for this enigmatic redox state. We propose two models as possible candidates for the E4 state. Both models feature two hydrides on the FeMo cofactor, bridging atoms Fe2 and Fe6 with a terminal sulfhydryl group on either Fe2 or Fe6 (derived from the S2B bridge) and the change in coordination results in local lower-spin electronic structure at Fe2 and Fe6. These structures appear consistent with the bridging hydride proposal put forward from ENDOR studies and are calculated to be lower in energy than other proposed models for E4 at the TPSSh-QM/MM level of theory. We critically analyze the DFT method dependency in calculations of FeMoco that has resulted in strikingly different proposals for this state. Importantly, dinitrogen binds exothermically to either Fe2 or Fe6 in our models, contrary to others, an effect rationalized via the unique ligand field (from the hydrides) at the Fe with an empty coordination site. A low-spin Fe site is proposed as being important to N2 binding. Furthermore, the geometries of these states suggest a feasible reductive elimination step that could follow, as experiments indicate. Via this step, two electrons are released, reducing the cofactor to yield a distorted 4-coordinate Fe2 or Fe6 that partially activates N2. We speculate that stabilization of an N2-bound Fe(i) at Fe6 (not found for Fe2 model) via reductive elimination is a crucial part of N2 activation in nitrogenases, possibly aided by the apical heterometal ion (Mo or V). By using protons from the sulfhydryl group (to regenerate the sulfide bridge between Fe2 and Fe6) and the nearby homocitrate hydroxy group, we calculate a plausible route to yield a diazene intermediate. This is found to be more favorable with the Fe6-bound model than the Fe2-bound model; however, this protonation is uphill in energy, suggesting protonation of N2 might occur later in the catalytic cycle or via another mechanism.

Aerobic nitrogen-fixing bacteria for hydrogen and ammonium production: current state and perspectives

Biological nitrogen fixation (BNF) is accomplished through the action of the oxygen-sensitive enzyme nitrogenase. One unique caveat of this reaction is the inclusion of hydrogen gas (H₂) evolution as a requirement of the reaction mechanism. In the absence of nitrogen gas as a substrate, nitrogenase will reduce available protons to become a directional ATP-dependent hydrogenase. Aerobic nitrogen-fixing microbes are of particular interest, because these organisms have evolved to perform these reactions with oxygen-sensitive enzymes in an environment surrounded by oxygen. The ability to maintain a functioning nitrogenase in aerobic conditions facilitates the application of these organisms under conditions where most anaerobic nitrogen fixers are excluded. In recent years, questions related to the potential yields of the nitrogenase-derived products ammonium and H₂ have grown more approachable to experimentation based on efforts to construct increasingly more complicated strains of aerobic nitrogen fixers such as the obligate aerobe Azotobacter vinelandii. This mini-review provides perspectives of recent and historical efforts to understand and quantify the yields of ammonium and H₂ that can be obtained through the model aerobe A. vinelandii, and outstanding questions that remain to be answered to fully realize the potential of nitrogenase in these applications with model aerobic bacteria.

Spectroscopic Description of the E1 State of Mo Nitrogenase Based on Mo and Fe X-ray Absorption and Mössbauer Studies

Mo nitrogenase (N2ase) utilizes a two-component protein system, the catalytic MoFe and its electron-transfer partner FeP, to reduce atmospheric dinitrogen (N2) to ammonia (NH3). The FeMo cofactor contained in the MoFe protein serves as the catalytic center for this reaction and has long inspired model chemistry oriented toward activating N2. This field of chemistry has relied heavily on the detailed characterization of how Mo N2ase accomplishes this feat. Understanding the reaction mechanism of Mo N2ase itself has presented one of the most challenging problems in bioinorganic chemistry because of the ephemeral nature of its catalytic intermediates, which are difficult, if not impossible, to singly isolate. This is further exacerbated by the near necessity of FeP to reduce native MoFe, rendering most traditional means of selective reduction inept. We have now investigated the first fundamental intermediate of the MoFe catalytic cycle, E1, as prepared both by low-flux turnover and radiolytic cryoreduction, using a combination of Mo Kα high-energy-resolution fluorescence detection and Fe K-edge partial-fluorescence-yield X-ray absorption spectroscopy techniques. The results demonstrate that the formation of this state is the result of an Fe-centered reduction and that Mo remains redox-innocent. Furthermore, using Fe X-ray absorption and 57Fe Mössbauer spectroscopies, we correlate a previously reported unique species formed under cryoreducing conditions to the natively formed E1 state through annealing, demonstrating the viability of cryoreduction in studying the catalytic intermediates of MoFe.

X-ray Magnetic Circular Dichroism Spectroscopy Applied to Nitrogenase and Related Models: Experimental Evidence for a Spin-Coupled Molybdenum(III) Center

Nitrogenase enzymes catalyze the reduction of atmospheric dinitrogen to ammonia utilizing a Mo‐7Fe‐9S‐C active site, the so‐called FeMoco cluster. FeMoco and an analogous small‐molecule (Et₄N)[(Tp)MoFe₃S₄Cl₃] cubane have both been proposed to contain unusual spin‐coupled Mo^III sites with an S(Mo)=1/2 non‐Hund configuration at the Mo atom. Herein, we present Fe and Mo L₃‐edge X‐ray magnetic circular dichroism (XMCD) spectroscopy of the (Et₄N)[(Tp)MoFe₃S₄Cl₃] cubane and Fe L_2,3‐edge XMCD spectroscopy of the MoFe protein (containing both FeMoco and the 8Fe‐7S P‐cluster active sites). As the P‐clusters of MoFe protein have an S=0 total spin, these are effectively XMCD‐silent at low temperature and high magnetic field, allowing for FeMoco to be selectively probed by Fe L_2,3‐edge XMCD within the intact MoFe protein. Further, Mo L₃‐edge XMCD spectroscopy of the cubane model has provided experimental support for a local S(Mo)=1/2 configuration, demonstrating the power and selectivity of XMCD.

Efforts toward optimization of aerobic biohydrogen reveal details of secondary regulation of biological nitrogen fixation by nitrogenous compounds in Azotobacter vinelandii

Biological nitrogen fixation (BNF) through the enzyme nitrogenase is performed by a unique class of organisms known as diazotrophs. One interesting facet of BNF is that it produces molecular hydrogen (H₂) as a requisite by-product. In the absence of N₂ substrate, or under conditions that limit access of N₂ to the enzyme through modifications of amino acids near the active site, nitrogenase activity can be redirected toward a role as a dedicated hydrogenase. In free-living diazotrophs, nitrogenases are tightly regulated to minimize BNF to meet only the growth requirements of the cell, and are often accompanied by uptake hydrogenases that oxidize the H₂ by-product to recover the electrons from this product. The wild-type strain of Azotobacter vinelandii performs all of the tasks described above to minimize losses of H₂ while also growing as an obligate aerobe. Individual alterations to A. vinelandii have been demonstrated that disrupt key aspects of the N₂ reduction cycle, thereby diverting resources and energy toward the production of H₂. In this work, we have combined three approaches to override the primary regulation of BNF and redirect metabolism to drive biological H₂ production by nitrogenase in A. vinelandii. The resulting H₂-producing strain was further utilized as a surrogate to study secondary, post-transcriptional regulation of BNF by several key nitrogen-containing metabolites. The improvement in yields of H₂ that were achieved through various combinations of these three approaches was compared and is presented along with the insights into inhibition of BNF by several nitrogen compounds that are common in various waste streams. The findings indicate that both ammonium and nitrite hinder BNF through this secondary inhibition, but urea and nitrate do not. These results provide essential details to inform future biosynthetic approaches to yield nitrogen products that do not inadvertently inhibit BNF.

Insight into the Iron-Molybdenum Cofactor of Nitrogenase from Synthetic Iron Complexes with Sulfur, Carbon, and Hydride Ligands

Nitrogenase enzymes are used by microorganisms for converting atmospheric N2 to ammonia, which provides an essential source of N atoms for higher organisms. The active site of the molybdenum-dependent nitrogenase is the unique carbide-containing iron-sulfur cluster called the iron-molybdenum cofactor (FeMoco). On the FeMoco, N2 binding is suggested to occur at one or more iron atoms, but the structures of the catalytic intermediates are not clear. In order to establish the feasibility of different potential mechanistic steps during biological N2 reduction, chemists have prepared iron complexes that mimic various structural aspects of the iron sites in the FeMoco. This reductionist approach gives mechanistic insight, and also uncovers fundamental principles that could be used more broadly for small-molecule activation. Here, we discuss recent results and highlight directions for future research. In one direction, synthetic iron complexes have now been shown to bind N2, break the N-N triple bond, and produce ammonia catalytically. Carbon- and sulfur-based donors have been incorporated into the ligand spheres of Fe-N2 complexes to show how these atoms may influence the structure and reactivity of the FeMoco. Hydrides have been incorporated into synthetic systems, which can bind N2, reduce some nitrogenase substrates, and/or reductively eliminate H2 to generate reduced iron centers. Though some carbide-containing iron clusters are known, none yet have sulfide bridges or high-spin iron atoms like the FeMoco.

Synthesis of well-defined bicapped octahedral iron clusters [((tren) L)2 Fe8 (PMe2 Ph)2 ](n) (n=0, -1)

The synthesis of polynuclear clusters with control over size and cluster geometry remains an unsolved challenge. Herein, we report the synthesis and characterization of open-shell octairon clusters supported by two heptaamine ligands [o-H2 NC6 H4 NH(CH2 )2 ]3 N ((tren) LH9 ). The crystal structure of the all-ferrous species ([(tren) L)2 Fe8 (PMe2 Ph)2 ] (1) displays a bicapped octahedral geometry with FeFe distances ranging from 2.4071(6) to 2.8236(5) Å, where the ligand amine units are formally in amine, amide, and imide oxidation states. Several redox states of the octairon cluster are accessible, as ascertained using cyclic voltammetry. The one-electron-reduced clusters [M](+) [((tren) L)2 Fe8 (PMe2 Ph)2 ](-) (M=Bu4 N (2 a); (15-crown-5)Na(thf) (2 b)) were isolated and characterized. Variable-temperature magnetic susceptibility data indicates that the exchange coupling within the [Fe8 ] core is antiferromagnetic which is attenuated upon reduction to the mixed valent anion.

Low frequency dynamics of the nitrogenase MoFe protein via femtosecond pump probe spectroscopy - Observation of a candidate promoting vibration

We have used femtosecond pump-probe spectroscopy (FPPS) to study the FeMo-cofactor within the nitrogenase (N2ase) MoFe protein from Azotobacter vinelandii. A sub-20-fs visible laser pulse was used to pump the sample to an excited electronic state, and a second sub-10-fs pulse was used to probe changes in transmission as a function of probe wavelength and delay time. The excited protein relaxes to the ground state with a ~1.2ps time constant. With the short laser pulse we coherently excited the vibrational modes associated with the FeMo-cofactor active site, which are then observed in the time domain. Superimposed on the relaxation dynamics, we distinguished a variety of oscillation frequencies with the strongest band peaks at ~84, 116, 189, and 226cm(-1). Comparison with data from nuclear resonance vibrational spectroscopy (NRVS) shows that the latter pair of signals comes predominantly from the FeMo-cofactor. The frequencies obtained from the FPPS experiment were interpreted with normal mode calculations using both an empirical force field (EFF) and density functional theory (DFT). The FPPS data were also compared with the first reported resonance Raman (RR) spectrum of the N2ase MoFe protein. This approach allows us to outline and assign vibrational modes having relevance to the catalytic activity of N2ase. In particular, the 226cm(-1) band is assigned as a potential 'promoting vibration' in the H-atom transfer (or proton-coupled electron transfer) processes that are an essential feature of N2ase catalysis. The results demonstrate that high-quality room-temperature solution data can be obtained on the MoFe protein by the FPPS technique and that these data provide added insight to the motions and possible operation of this protein and its catalytic prosthetic group.

Identification of a key catalytic intermediate demonstrates that nitrogenase is activated by the reversible exchange of N₂ for H₂

Freeze-quenching nitrogenase during turnover with N2 traps an S = ½ intermediate that was shown by ENDOR and EPR spectroscopy to contain N2 or a reduction product bound to the active-site molybdenum-iron cofactor (FeMo-co). To identify this intermediate (termed here EG), we turned to a quench-cryoannealing relaxation protocol. The trapped state is allowed to relax to the resting E0 state in frozen medium at a temperature below the melting temperature; relaxation is monitored by periodically cooling the sample to cryogenic temperature for EPR analysis. During -50 °C cryoannealing of EG prepared under turnover conditions in which the concentrations of N2 and H2 ([H2], [N2]) are systematically and independently varied, the rate of decay of EG is accelerated by increasing [H2] and slowed by increasing [N2] in the frozen reaction mixture; correspondingly, the accumulation of EG is greater with low [H2] and/or high [N2]. The influence of these diatomics identifies EG as the key catalytic intermediate formed by reductive elimination of H2 with concomitant N2 binding, a state in which FeMo-co binds the components of diazene (an N-N moiety, perhaps N2 and two [e(-)/H(+)] or diazene itself). This identification combines with an earlier study to demonstrate that nitrogenase is activated for N2 binding and reduction through the thermodynamically and kinetically reversible reductive-elimination/oxidative-addition exchange of N2 and H2, with an implied limiting stoichiometry of eight electrons/protons for the reduction of N2 to two NH3.

Misconception of reductive elimination of H2, in the context of the mechanism of nitrogenase

Calculated atom partial charges reveal misconceptions of reductive elimination of H₂.

Valence to core X-ray emission spectroscopy

This Progress Report discusses the chemical sensitivity of Kβ valence to core X-ray emission spectroscopy (vtc-XES) and its applications for investigating 3d-transition-metal based materials. Vtc-XES can be used for ligand identification and for the characterization of the valence electronic levels. The technique provides information that is similar to valence band photoemission spectroscopy but the sample environment can be chosen freely and thus allows measurements in presence of gases and liquids and it can be applied for measurements under in situ/operando or extreme conditions. The theoretical basis of the technique is presented using a one-electron approach and the vtc-XES spectral features are interpreted using ground state density functional theory calculations. Some recent results obtained by vtc-XES in various scientific fields are discussed to demonstrate the potential and future applications of this technique. Resonant X-ray emission spectroscopy is briefly introduced with some applications for the study of 3d and 5d-transition-metal based systems.

A confirmation of the quench-cryoannealing relaxation protocol for identifying reduction states of freeze-trapped nitrogenase intermediates

We have advanced a mechanism for nitrogenase catalysis that rests on the identification of a low-spin EPR signal (S = 1/2) trapped during turnover of a MoFe protein as the E4 state, which has accumulated four reducing equivalents as two [Fe-H-Fe] bridging hydrides. Because electrons are delivered to the MoFe protein one at a time, with the rate-limiting step being the off-rate of oxidized Fe protein, it is difficult to directly control, or know, the degree of reduction, n, of a trapped intermediate, denoted En, n = 1-8. To overcome this previously intractable problem, we introduced a quench-cryoannealing relaxation protocol for determining n of an EPR-active trapped En turnover state. The trapped "hydride" state was allowed to relax to the resting E0 state in frozen medium, which prevents additional accumulation of reducing equivalents; binding of reduced Fe protein and release of oxidized protein from the MoFe protein both are abolished in a frozen solid. Relaxation of En was monitored by periodic EPR analysis at cryogenic temperature. The protocol rests on the hypothesis that an intermediate trapped in the frozen solid can relax toward the resting state only by the release of a stable reduction product from FeMo-co. In turnover under Ar, the only product that can be released is H2, which carries two reducing equivalents. This hypothesis implicitly predicts that states that have accumulated an odd number of electrons/protons (n = 1, 3) during turnover under Ar cannot relax to E0: E3 can relax to E1, but E1 cannot relax to E0 in the frozen state. The present experiments confirm this prediction and, thus, the quench-cryoannealing protocol and our assignment of E4, the foundation of the proposed mechanism for nitrogenase catalysis. This study further gives insights into the identity of the En intermediates with high-spin EPR signals, 1b and 1c, trapped under high electron flux.

Nitrogenase reduction of carbon-containing compounds

Nitrogenase is an enzyme found in many bacteria and archaea that catalyzes biological dinitrogen fixation, the reduction of N2 to NH3, accounting for the major input of fixed nitrogen into the biogeochemical N cycle. In addition to reducing N2 and protons, nitrogenase can reduce a number of small, non-physiological substrates. Among these alternative substrates are included a wide array of carbon-containing compounds. These compounds have provided unique insights into aspects of the nitrogenase mechanism. Recently, it was shown that carbon monoxide (CO) and carbon dioxide (CO2) can also be reduced by nitrogenase to yield hydrocarbons, opening new insights into the mechanism of small molecule activation and reduction by this complex enzyme as well as providing clues for the design of novel molecular catalysts. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Mononuclear five- and six-coordinate iron hydrazido and hydrazine species

This article describes the synthesis and characterization of several low-spin iron(II) complexes that coordinate hydrazine (N(2)H(4)), hydrazido (N(2)H(3)(-)), and ammonia. The sterically encumbered tris(di-meta-terphenylphosphino)borate ligand, [PhBP(mter)(3)](-), is introduced to provide access to species that cannot be stabilized with the [PhBP(Ph)(3)](-) ligand ([PhBP(R)(3)](-) = PhB(CH(2)PR(2))(3)(-)). Treatment of [PhBP(mter)(3)]FeMe with hydrazine generates the unusual 5-coordinate hydrazido complex [PhBP(mter)(3)]Fe(η(2)-N(2)H(3)) (1), in which the hydrazido serves as an L(2)X-type ligand. Upon coordination of an L-type ligand, the hydrazido shifts to an LX-type ligand, generating [PhBP(mter)(3)]Fe(L)(η(2)-N(2)H(3)) (L = N(2)H(4) (2) or NH(3) (3)). In contrast, treatment of [PhBP(Ph)(3)]FeMe with hydrazine forms the adduct [PhBP(Ph)(3)]Fe(Me)(η(2)-N(2)H(4)) (5). Complex 5 is thermally unstable to methane loss, generating intermediate [PhBP(Ph)(3)]Fe(η(2)-N(2)H(3)), which undergoes bimolecular coupling to produce {[PhBP(Ph)(3)]Fe}(2)(μ-η(1):η(1)-N(2)H(4))(μ-η(2):η(2)-N(2)H(2)). The oxidation of these and related hydrazine and hydrazido species is also presented. For example, oxidation of 1 or 5 with Pb(OAc)(4) results in disproportionation of the N(2)H(x) ligand (x = 3, 4), and formation of [PhBP(R)(3)]Fe(NH(3))(OAc) (R = Ph (9) and mter (11)).

Electron transfer in nitrogenase catalysis

Nitrogenase is a two-component enzyme that catalyzes the nucleotide-dependent reduction of N2 to 2NH3. This process involves three redox-active metal-containing cofactors including a [4Fe-4S] cluster, an eight-iron P cluster and a seven-iron plus molybdenum FeMo-cofactor, the site of substrate reduction. A deficit-spending model for electron transfer has recently been proposed that incorporates protein conformational gating that favors uni-directional electron transfer among the metalloclusters for the activation of the substrate-binding site. Also reviewed is a proposal that each of the metal clusters cycles through only two redox states of the metal-sulfur core as the system accumulates the multiple electrons required for substrate binding and reduction. In particular, it was suggested that as FeMo-cofactor acquires the four electrons necessary for optimal binding of N2, each successive pair of electrons is stored as an Fe-H--Fe bridging hydride, with the FeMo-cofactor metal-ion core retaining its resting redox state. We here broaden the discussion of stable intermediates that might form when FeMo-cofactor receives an odd number of electrons.

X-ray emission spectroscopy evidences a central carbon in the nitrogenase iron-molybdenum cofactor

Nitrogenase is a complex enzyme that catalyzes the reduction of dinitrogen to ammonia. Despite insight from structural and biochemical studies, its structure and mechanism await full characterization. An iron-molybdenum cofactor (FeMoco) is thought to be the site of dinitrogen reduction, but the identity of a central atom in this cofactor remains unknown. Fe Kβ x-ray emission spectroscopy (XES) of intact nitrogenase MoFe protein, isolated FeMoco, and the FeMoco-deficient nifB protein indicates that among the candidate atoms oxygen, nitrogen, and carbon, it is carbon that best fits the XES data. The experimental XES is supported by computational efforts, which show that oxidation and spin states do not affect the assignment of the central atom to C(4-). Identification of the central atom will drive further studies on its role in catalysis.

A five-coordinate phosphino/acetate iron(II) scaffold that binds N2, N2H2, N2H4, and NH3 in the sixth site

A family of iron(II) complexes that coordinate dinitrogen, diazene, hydrazine, and ammonia are presented. This series of complexes is unusual in that the complexes within it feature a common auxiliary ligand set and differ only by virtue of the nitrogenous N(x)H(y) ligand that occupies the sixth binding site. The ability of an iron center to bind N(2), N(2)H(2), N(2)H(4), and NH(3) is important to establish in the context of evaluating catalytic N(2) reduction schemes that invoke these nitrogenous species. Such a scenario has been proposed as an iron-mediated, alternating reduction scheme within the cofactor of nitrogenase enzymes.

Electron paramagnetic resonance spectroscopy

EPR spectroscopy has been an important tool in nitrogenase research for the last 50 years. The three metalloclusters in nitrogenase, the Fe protein [4Fe-4S] cluster, and the MoFe protein P-cluster, and FeMo-cofactor, all have EPR spectra when poised in the appropriate paramagnetic states. EPR spectroscopy can probe changes in the electronic properties of each metal cluster, such as when substrates bind, and can provide a definitive method for observing changes in the redox states of the clusters. In this chapter, the methods for analysis of the three metal clusters of nitrogenase by EPR spectroscopy are described, along with methods for trapping substrate-derived intermediates on the active site that are amenable to characterization by EPR and other magnetic resonance spectroscopy techniques.

ENDOR/HYSCORE studies of the common intermediate trapped during nitrogenase reduction of N2H2, CH3N2H, and N2H4 support an alternating reaction pathway for N2 reduction

Enzymatic N(2) reduction proceeds along a reaction pathway composed of a sequence of intermediate states generated as a dinitrogen bound to the active-site iron-molybdenum cofactor (FeMo-co) of the nitrogenase MoFe protein undergoes six steps of hydrogenation (e(-)/H(+) delivery). There are two competing proposals for the reaction pathway, and they invoke different intermediates. In the 'Distal' (D) pathway, a single N of N(2) is hydrogenated in three steps until the first NH(3) is liberated, and then the remaining nitrido-N is hydrogenated three more times to yield the second NH(3). In the 'Alternating' (A) pathway, the two N's instead are hydrogenated alternately, with a hydrazine-bound intermediate formed after four steps of hydrogenation and the first NH(3) liberated only during the fifth step. A recent combination of X/Q-band EPR and (15)N, (1,2)H ENDOR measurements suggested that states trapped during turnover of the α-70(Ala)/α-195(Gln) MoFe protein with diazene or hydrazine as substrate correspond to a common intermediate (here denoted I) in which FeMo-co binds a substrate-derived [N(x)H(y)] moiety, and measurements reported here show that turnover with methyldiazene generates the same intermediate. In the present report we describe X/Q-band EPR and (14/15)N, (1,2)H ENDOR/HYSCORE/ESEEM measurements that characterize the N-atom(s) and proton(s) associated with this moiety. The experiments establish that turnover with N(2)H(2), CH(3)N(2)H, and N(2)H(4) in fact generates a common intermediate, I, and show that the N-N bond of substrate has been cleaved in I. Analysis of this finding leads us to conclude that nitrogenase reduces N(2)H(2), CH(3)N(2)H, and N(2)H(4) via a common A reaction pathway, and that the same is true for N(2) itself, with Fe ion(s) providing the site of reaction.

Nitrogenase structure and function relationships by density functional theory

Modern density functional theory has tremendous potential with matching popularity in metalloenzymology to reveal the unseen atomic and molecular details of structural data, spectroscopic measurements, and biochemical experiments by providing insights into unobservable structures and states, while also offering theoretical justifications for observed trends and differences. An often untapped potential of this theoretical approach is to bring together diverse experimental structural and reactivity information and allow for these to be critically evaluated at the same level. This is particularly applicable for the tantalizingly complex problem of the structure and molecular mechanism of biological nitrogen fixation. In this chapter we provide a review with extensive practical details of the compilation and evaluation of experimental data for an unbiased and systematic density functional theory analysis that can lead to remarkable new insights about the structure-function relationships of the iron-sulfur clusters of nitrogenase.

Mechanism of Mo-dependent nitrogenase

Nitrogenase is the enzyme responsible for biological reduction of dinitrogen (N(2)) to ammonia, a form usable for life. Playing a central role in the global biogeochemical nitrogen cycle, this enzyme has been the focus of intensive research for over 60 years. This chapter provides an overview of the features of nitrogenase as a background to the subsequent chapters of this volume that detail the many methods that have been applied in an attempt to gain a deeper understanding of this complex enzyme.