Asp537 and Asp812 in bacteriophage T7 RNA polymerase as metal ion-binding sites studied by EPR, flow-dialysis, and transcription

Quantifying the Number and Affinity of Mn2+-Binding Sites with EPR Spectroscopy

During the last decades, various functional oligonucleotides have been discovered including DNAzymes, ribozymes, and riboswitches. Their function is based on their ability to form and change their three-dimensional structure. Binding of divalent ions to specific binding pockets was found to be important for the global structure and function. Here, we present a protocol that allows counting the number of Mn²⁺-binding sites and to determine their dissociation constants by means of continuous wave X-band Electron Paramagnetic Resonance (EPR) spectroscopy. In this method, Mn²⁺ is titrated into the oligonucleotide-containing sample and the intensity of the EPR spectrum is recorded. By comparison with a Mn²⁺-only reference sample, the binding isotherm can be constructed and fitted to binding models yielding the number and affinities of the binding sites. This method has been successfully applied to several functional oligonucleotides.

Spin Labeling of Long RNAs Via Click Reaction and Enzymatic Ligation

Electron paramagnetic resonance (EPR) is a spectroscopic method for investigating structures, conformational changes, and dynamics of biomacromolecules, for example, oligonucleotides. In order to be applicable, the oligonucleotide has to be labeled site-specifically with paramagnetic tags, the so-called spin labels. Here, we provide a protocol for spin labeling of long oligonucleotides with nitroxides. In the first step, a short and commercially available RNA strand is labeled with a nitroxide via a copper-(I)-catalyzed azide-alkyne cycloaddition (CuAAC), also referred to as "click" reaction. In the second step, the labeled RNA strand is fused to another RNA sequence by means of enzymatic ligation to obtain the labeled full-length construct. The protocol is robust and has been shown experimentally to deliver high yields for RNA sequences up to 81 nucleotides, but longer strands are in principle also feasible. Moreover, it sets the path to label, for example, long riboswitches, ribozymes, and DNAzymes for coarse-grained structure determination and enables to investigate mechanistical features of these systems.

PfKsgA1 functions as a transcription initiation factor and interacts with the N-terminal region of the mitochondrial RNA polymerase of Plasmodium falciparum

The small mitochondrial genome (mtDNA) of the malaria parasite is known to transcribe its genes polycistonically, although promoter element(s) have not yet been identified. An unusually large Plasmodium falciparum candidate mitochondrial phage-like RNA polymerase (PfmtRNAP) with an extended N-terminal region is encoded by the parasite nuclear genome. Using specific antibodies against the enzyme, we established that PfmtRNAP was targeted exclusively to the mitochondrion and interacted with mtDNA. Phylogenetic analysis showed that it is part of a separate apicomplexan clade. A search for PfmtRNAP-associated transcription initiation factors using sequence homology and in silico protein-protein interaction network analysis identified PfKsgA1. PfKsgA1 is a dual cytosol- and mitochondrion-targeted protein that functions as a small subunit rRNA dimethyltransferase in ribosome biogenesis. Chromatin immunoprecipitation showed that PfKsgA1 interacts with mtDNA, and in vivo crosslinking and pull-down experiments confirmed PfmtRNAP-PfKsgA1 interaction. The ability of PfKsgA1 to serve as a transcription initiation factor was demonstrated by complementation of yeast mitochondrial transcription factor Mtf1 function in Rpo41-driven in vitro transcription. Pull-down experiments using PfKsgA1 and PfmtRNAP domains indicated that the N-terminal region of PfmtRNAP interacts primarily with the PfKsgA1 C-terminal domain with some contacts being made with the linker and N-terminal domain of PfKsgA1. In the absence of full-length recombinant PfmtRNAP, solution structures of yeast mitochondrial RNA polymerase Rpo41 complexes with Mtf1 or PfKsgA1 were determined by small-angle X-ray scattering. Protein interaction interfaces thus identified matched with those reported earlier for Rpo41-Mtf1 interaction and overlaid with the PfmtRNAP-interfacing region identified experimentally for PfKsgA1. Our results indicate that in addition to a role in mitochondrial ribosome biogenesis, PfKsgA1 has an independent function as a transcription initiation factor for PfmtRNAP.

Optical Control of Transcription: Genetically Encoded Photoswitchable Variants of T7 RNA Polymerase

Light-sensing protein domains that link an exogenous light signal to the activity of an enzyme have attracted much attention for the engineering of new regulatory mechanisms into proteins and for studying the dynamic behavior of intracellular reactions and reaction cascades. Light-oxygen-voltage (LOV) photoreceptors are blue-light-sensing modules that have been intensely characterized for this purpose and linked to several proteins of interest. For the successful application of these tools, it is crucial to identify appropriate fusion strategies for combining sensor and enzyme domains that sustain activity and light-induced responsivity. Terminal fusion of LOV domains is the natural strategy; however, this is not transferrable to T7 RNA polymerase because both of its termini are involved in catalysis. It is shown herein that it is possible to covalently insert LOV domains into the polymerase protein, while preserving its activity and generating new light-responsive allosteric coupling.

Universal aptamer-based real-time monitoring of enzymatic RNA synthesis

In vitro transcription is an essential laboratory technique for enzymatic RNA synthesis. Unfortunately, no methods exist for analyzing quality and quantity of the synthesized RNA while the transcription proceeds. Here we describe a simple, robust, and universal system for monitoring and quantifying the synthesis of any RNA in real time without interference from abortive transcription byproducts. The distinguishing feature is a universal fluorescence module (UFM), consisting of the eGFP-like Spinach aptamer and a highly active hammerhead ribozyme, which is appended to the RNA of interest (ROI). In the transcription mixture, the primary transcript is cleaved rapidly behind the ROI, thereby releasing always the same UFM, independent of the ROI sequence, polymerase, or promoter used. The UFM binds to the target of the Spinach aptamer, the fluorogenic dye DFHBI, and thereby induces a strong fluorescence signal. This design allows real-time quantification, standardization, parallelization, and high-throughput screening.

X-ray crystal structures elucidate the nucleotidyl transfer reaction of transcript initiation using two nucleotides

We have determined the X-ray crystal structures of the pre- and postcatalytic forms of the initiation complex of bacteriophage N4 RNA polymerase that provide the complete set of atomic images depicting the process of transcript initiation by a single-subunit RNA polymerase. As observed during T7 RNA polymerase transcript elongation, substrate loading for the initiation process also drives a conformational change of the O-helix, but only the correct base pairing between the +2 substrate and DNA base is able to complete the O-helix conformational transition. Substrate binding also facilitates catalytic metal binding that leads to alignment of the reactive groups of substrates for the nucleotidyl transfer reaction. Although all nucleic acid polymerases use two divalent metals for catalysis, they differ in the requirements and the timing of binding of each metal. In the case of bacteriophage RNA polymerase, we propose that catalytic metal binding is the last step before the nucleotidyl transfer reaction.

Modeling and optimization of a batch process for in vitro RNA production

RNA molecules are commonly produced in vitro by transcription, utilizing a DNA template, an RNA polymerase enzyme, and nucleoside triphosphate substrates (NTPs). In addition to the full-length RNA molecule coded for by the DNA template, significant amounts of shorter RNA molecules are produced. A simplified model of this complex transcription process is presented, with the shorter RNA molecules lumped into a single pool. The rate equations do not depend on the stoichiometry of the RNA molecule of interest, which facilitates application of the model to other RNA molecules. Optimal initial conditions for batch in vitro RNA transcription to produce a dodecamer RNA containing three different nucleotides have been predicted using the model. The predicted optimal values for equimolar NTPs are 10 to 15 mM initial concentration for each NTP and 50 to 60 mM for magnesium acetate, yielding a maximum final dodecamer concentration of 0.8 +/- 0.1 mM at the 90% confidence interval. Experimental data agree well with the model results. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 210-220, 1997.

EPR methods to study specific metal-ion binding sites in RNA

The properties of metal-ion interactions with RNA can be explored by spectroscopic methods. In this chapter, we describe the use of paramagnetic Mn(2+) ions and electron paramagnetic resonance (EPR)-based techniques to monitor the association of Mn(2+) with RNA and related nucleotides. Solution EPR methods are used to determine the numbers of Mn(2+) ions associating with RNA. For RNA poised with a single-bound Mn(2+), low-temperature EPR characteristics provide information about the asymmetry of the Mn(2+) coordination site. To identify the RNA groups coordinating to the Mn(2+) ion, ENDOR (electron nuclear double resonance) and ESEEM (electron spin echo envelope modulation) methods are applied. Both continuous-wave (CW) and electron spin echo (ESE)-detected ENDOR methods are described. This chapter includes practical details for RNA sample preparation, including isotope substitution and cryoprotection, and an overview of data acquisition and analysis methods used in these techniques, as well as examples from the current literature.

Genomic characterization of the intron-containing T7-like phage phiL7 of Xanthomonas campestris

The lytic phage phiL7, which morphologically belongs to the Siphoviridae family, infects Xanthomonas campestris pv. campestris. Nucleotide sequence analysis has revealed that phiL7 contains a linear double-stranded DNA genome (44,080 bp, 56% G+C) with a 3'-protruding cos site (5'-TTACCGGAC-3') and 59 possible genes. Among the deduced proteins, 32 have homologs with known functions and 18 show no database similarities; moreover, the genes encoding these 18 proteins mostly have varying G+C contents and form clusters dispersed along the genome. Only 39 genes have sequences related (27% to 78%) to those of sequenced genes of X. oryzae pv. oryzae phages, although the genome size and architecture of these Xanthomonas phages are similar. These findings suggest that phiL7 acquired genes by horizontal transfer, followed by evolution via various types of mutations. Major differences were found between phiL7 and the X. oryzae pv. oryzae phages: (i) phiL7 has a group I intron inserted in the DNA polymerase gene, the first such intron observed in Xanthomonas phages; (ii) although infection of phiL7 exerted inhibition to the host RNA polymerase, similar to the situations in X. oryzae pv. oryzae phages Xp10 and Xop411, sequence analysis did not identify a homologue of the Xp10 p7 that controls the shift from host RNA polymerase (RNAP) to viral RNAP during transcription; and (iii) phiL7 lacks the tail fiber protein gene that exhibits domain duplications thought to be important for host range determination in OP1, and sequence analysis suggested that p20 (tail protein III) instead has the potential to play this role.

Deciphering interactions of the aminoglycoside phosphotransferase(3')-IIIa with its ligands

Aminoglycoside phosphotransferase(3')-IIIa (APH) is the enzyme with broadest substrate range among the phosphotransferases that cause resistance to aminoglycoside antibiotics. In this study, the thermodynamic characterization of interactions of APH with its ligands are done by determining dissociation constants of enzyme-substrate complexes using electron paramagnetic resonance and fluorescence spectroscopy. Metal binding studies showed that three divalent cations bind to the apo-enzyme with low affinity. In the presence of AMPPCP, binding of the divalent cations occurs with 7-to-37-fold higher affinity to three additional sites dependent on the presence and absence of different aminoglycosides. Surprisingly, when both ligands, AMPPCP and aminoglycoside, are present, the number of high affinity metal binding sites is reduced to two with a 2-fold increase in binding affinity. The presence of divalent cations, with or without aminoglycoside present, shows only a small effect (<3-fold) on binding affinity of the nucleotide to the enzyme. The presence of metal-nucleotide, but not nucleotide alone, increases the binding affinity of aminoglycosides to APH. Replacement of magnesium (II) with manganese (II) lowered the catalytic rates significantly while affecting the substrate selectivity of the enzyme such that the aminoglycosides with 2'-NH(2) become better substrates (higher V(max)) than those with 2'-OH.

T7 RNA polymerase studied by force measurements varying cofactor concentration

RNA polymerases carry out the synthesis of an RNA copy from a DNA template. They move along DNA, incorporate nucleotide triphosphate (NTP) at the end of the growing RNA chain, and consume chemical energy. In a single-molecule assay using the T7 RNA polymerase, we study how a mechanical force opposing the forward motion of the enzyme along DNA affects the translocation rate. We also study the influence of nucleotide and magnesium concentration on this process. The experiment shows that the opposing mechanical force is a competitive inhibitor of nucleotide binding. Also, the single-molecule data suggest that magnesium ions are involved in a step that does not depend on the external load force. These kinetic results associated with known biochemical and mutagenic data, along with the static information obtained from crystallographic structures, shape a very coherent view of the catalytic cycle of the enzyme: translocation does not take place upon NTP binding nor upon NTP cleavage, but rather occurs after PPi release and before the next nucleotide binding event. Furthermore, the energetic bias associated with the forward motion of the enzyme is close to kT and represents only a small fraction of the free energy of nucleotide incorporation and pyrophosphate hydrolysis.

Conserved aspartic acid 233 and alanine 231 are not required for poliovirus polymerase function in replicons

Nucleic acid polymerases have similar structures and motifs. The function of an aspartic acid (conserved in all classes of nucleic acid polymerases) in motif A remains poorly understood in RNA-dependent RNA polymerases. We mutated this residue to alanine in a poliovirus replicon. The resulting mutant could still replicate, although at a reduced level. In addition, mutation A231C (also in motif A) yielded high levels of replication. Taken together these results show that poliovirus polymerase conserved residues D233 and A231 are not essential to poliovirus replicon function.

Template-dependent incorporation of 8-N3AMP into RNA with bacteriophage T7 RNA polymerase

UV-induced photochemical crosslinking is a powerful approach that can be used for the identification of specific interactions involving nucleic acid-protein and nucleic acid-nucleic acid complexes. 8-AzidoATP (8-N(3)ATP) is a photoaffinity-labeling agent which has been widely used to elucidate the ATP binding site of a variety of proteins. However, its true potential as a photoactivatable nucleotide analog could not be exploited due to the lack of 8-azidoadenosine phosphoramidite, a monomer used in the synthesis of RNA, and the inability of 8-N(3)ATP to serve as an efficient substrate for bacteriophage RNA polymerase. In this study, we explored the ability of SP6, T3, and T7 RNA polymerases and metal ion cofactors to catalyze the incorporation of 8-N(3)AMP into RNA. Whereas transcription buffer containing 2.0-2.5 mM Mn(2+) supports T7 RNA polymerase-mediated insertion of 8-N(3)AMP into RNA, a mixture of 2.5 mM Mn(2+) and 2.5 mM Mg(2+) further improves the yield of 8-N(3)AMP-containing transcript. In addition, both RNA transcription and reverse transcription proceed with high fidelity for the incorporation of 8-N(3)AMP and complementary residue, respectively. Finally, we show that a high-affinity MS2 coat protein binding sequence, in which adenosine residues were replaced by 8-azidoadenosine, crosslinks to the coat protein of the Escherichia coli phage MS2.

The functional anatomy of an intrinsic transcription terminator

To induce dissociation of the transcription elongation complex, a typical intrinsic terminator forms a G.C-rich hairpin structure upstream from a U-rich run of approximately eight nucleotides that define the transcript 3' end. Here, we have adapted the nucleotide analog interference mapping (NAIM) approach to identify the critical RNA atoms and functional groups of an intrinsic terminator during transcription with T7 RNA polymerase. The results show that discrete components within the lower half of the hairpin stem form transient termination-specific contacts with the RNA polymerase. Moreover, disruption of interactions with backbone components of the transcript region hybridized to the DNA template favors termination. Importantly, comparative NAIM of termination events occurring at consecutive positions revealed overlapping but distinct sets of functionally important residues. Altogether, the data identify a collection of RNA terminator components, interactions and spacing constraints that govern efficient transcript release. The results also suggest specific architectural rearrangements of the transcription complex that may participate in allosteric control of intrinsic transcription termination.

N4 RNA polymerase II, a heterodimeric RNA polymerase with homology to the single-subunit family of RNA polymerases

Bacteriophage N4 middle genes are transcribed by a phage-coded, heterodimeric, rifampin-resistant RNA polymerase, N4 RNA polymerase II (N4 RNAPII). Sequencing and transcriptional analysis revealed that the genes encoding the two subunits comprising N4 RNAPII are translated from a common transcript initiating at the N4 early promoter Pe3. These genes code for proteins of 269 and 404 amino acid residues with sequence similarity to the single-subunit, phage-like RNA polymerases. The genes encoding the N4 RNAPII subunits, as well as a synthetic construct encoding a fusion polypeptide, have been cloned and expressed. Both the individually expressed subunits and the fusion polypeptide reconstitute functional enzymes in vivo and in vitro.

A trypanosome mitochondrial RNA polymerase is required for transcription and replication

Understanding mitochondrial transcription is a requisite first step toward understanding the regulation of mitochondrial gene expression in kinetoplastids. Here we report the identification and functional characterization of a mitochondrial RNA polymerase (mtRNAP) from Trypanosoma brucei, the first trans-acting factor involved in kinetoplast mitochondrial transcription to be identified. Using sequences conserved among the catalytic domains of the single-subunit mtRNAPs, we were able to obtain a full-length sequence for a candidate mtRNAP from T. brucei. Sequence comparison indicates that it shares homology in its catalytic domain with other single-subunit mtRNAPs, including functionally conserved residues that are identical in all single-subunit RNAPs. We used RNA interference to functionally knock out the gene product to determine whether the candidate gene represents an mtRNAP. As predicted for a mitochondrial specific RNA polymerase, reduction of the gene product resulted in a specific decrease of mitochondrial versus nuclear transcripts. Additionally, similar to the mtRNAP of other organisms, the mtRNAP characterized here is involved in replication of the mitochondrial genome. Thus, based on sequence comparison and functional studies, we have cloned an mtRNAP from trypanosomes.

Identification and characterization of a Plasmodium falciparum RNA polymerase gene with similarity to mitochondrial RNA polymerases

Nearly all mitochondrial RNA polymerase genes identified to date are encoded in the nucleus and have similarities to T3 and T7 bacteriophage RNA polymerases. Some chloroplast genes are also transcribed by T3/T7 phage-like RNA polymerases, raising the possibility that the apicomplexan parasites, which have both a mitochondrion and a plastid, might have two such genes. As part of an investigation of Plasmodium falciparum organelle transcription, we initiated a search for T3/T7 bacteriophage-like RNA polymerase genes. We employed degenerate primers based on highly conserved plant, animal and fungal mitochondrial RNA polymerase sequences to amplify corresponding P. falciparum sequences by polymerase chain reaction (PCR). Less well-conserved flanking sequences were obtained by inverse PCR. The resulting sequence predicts a 1503 amino acid open reading frame with similarity to other T3/T7 phage-like RNA polymerases. Essential amino acids that have been identified in T7 mutant analyses are conserved in the P. falciparum RNA polymerase gene. Comparison of the sequence with preliminary data from the P. falciparum genome sequencing project revealed strain heterogeneity within two regions of the gene. The amino-terminal predicted amino acid sequence of the RNA polymerase gene has similarities to mitochondrial targeting sequences. Taken together, these points suggest that we have identified the P. falciparum mitochondrial RNA polymerase gene.

The bifunctional active site of s-adenosylmethionine synthetase. Roles of the active site aspartates

S-Adenosylmethionine (AdoMet) synthetase catalyzes the biosynthesis of AdoMet in a unique enzymatic reaction. Initially the sulfur of methionine displaces the intact tripolyphosphate chain (PPP(i)) from ATP, and subsequently PPP(i) is hydrolyzed to PP(i) and P(i) before product release. The crystal structure of Escherichia coli AdoMet synthetase shows that the active site contains four aspartate residues. Aspartate residues Asp-16* and Asp-271 individually provide the sole protein ligand to one of the two required Mg(2+) ions (* denotes a residue from a second subunit); aspartates Asp-118 and Asp-238* are proposed to interact with methionine. Each aspartate has been changed to an uncharged asparagine, and the metal binding residues were also changed to alanine, to assess the roles of charge and ligation ability on catalytic efficiency. The resultant enzyme variants all structurally resemble the wild type enzyme as indicated by circular dichroism spectra and are tetramers. However, all have k(cat) reductions of approximately 10(3)-fold in AdoMet synthesis, whereas the MgATP and methionine K(m) values change by less than 3- and 8-fold, respectively. In the partial reaction of PPP(i) hydrolysis, mutants of the Mg(2+) binding residues have >700-fold reduced catalytic efficiency (k(cat)/K(m)), whereas the D118N and D238*N mutants are impaired less than 35-fold. The catalytic efficiency for PPP(i) hydrolysis by Mg(2+) site mutants is improved by AdoMet, like the wild type enzyme. In contrast AdoMet reduces the catalytic efficiency for PPP(i) hydrolysis by the D118N and D238*N mutants, indicating that the events involved in AdoMet activation are hindered in these methionyl binding site mutants. Ca(2+) uniquely activates the D271A mutant enzyme to 15% of the level of Mg(2+), in contrast to the approximately 1% Ca(2+) activation of the wild type enzyme. This indicates that the Asp-271 side chain size is a discriminator between the activating ability of Ca(2+) and the smaller Mg(2+).

MgATP binding and hydrolysis determinants of NtrC, a bacterial enhancer-binding protein

When phosphorylated, the dimeric form of nitrogen regulatory protein C (NtrC) of Salmonella typhimurium forms a larger oligomer(s) that can hydrolyze ATP and hence activate transcription by the sigma(54)-holoenzyme form of RNA polymerase. Studies of Mg-nucleoside triphosphate binding using a filter-binding assay indicated that phosphorylation is not required for nucleotide binding but probably controls nucleotide hydrolysis per se. Studies of binding by isothermal titration calorimetry indicated that the apparent K(d) of unphosphorylated NtrC for MgATPgammaS is 100 microM at 25 degrees C, and studies by filter binding indicated that the concentration of MgATP required for half-maximal binding is 130 microM at 37 degrees C. Filter-binding studies with mutant forms of NtrC defective in ATP hydrolysis implicated two regions of its central domain directly in nucleotide binding and three additional regions in hydrolysis. All five are highly conserved among activators of sigma(54)-holoenzyme. Regions implicated in binding are the Walker A motif and the region around residues G355 to R358, which may interact with the nucleotide base. Regions implicated in nucleotide hydrolysis are residues S207 and E208, which have been proposed to lie in a region analogous to the switch I effector region of p21(ras) and other purine nucleotide-binding proteins; residue R294, which may be a catalytic residue; and residue D239, which is the conserved aspartate in the putative Walker B motif. D239 appears to play a role in binding the divalent cation essential for nucleotide hydrolysis. Electron paramagnetic resonance analysis of Mn(2+) binding indicated that the central domain of NtrC does not bind divalent cation strongly in the absence of nucleotide.

All three residues of the Tn 10 transposase DDE catalytic triad function in divalent metal ion binding

Tn 10/IS 10 transposition involves excision of the transposon from a donor site and subsequent joining of the excised transposon to a new target site. These steps are catalyzed by the Tn 10 -encoded transposase protein and require the presence of a suitable divalent metal ion. Like other transposase and retroviral integrase proteins, Tn 10 transposase appears to contain a single active site which includes a triad of acidic amino acid residues generally referred to as the DDE motif. In addition to its role in catalysis, the Tn 10 transposase DDE motif also functions in target capture, a step that in vitro is greatly facilitated by the presence of a suitable divalent metal ion. We show that cysteine residue substitutions at each of the DDE motif residues in Tn 10 transposase result in a change in the divalent metal ion requirements for catalysis, such that Mn2+but not Mg2+can be used. This switch in metal ion specificity provides evidence that each of the DDE motif residues functions directly in metal ion binding. We also show differential effects of DDE mutations on metal ion-assisted target capture. A number of models, including a two metal ion active site, are considered to explain these effects.

Organellar RNA polymerases of higher plants

The nuclear genome of the model plant Arabidopsis thaliana contains a small gene family consisting of three genes encoding RNA polymerases of the single-subunit bacteriophage type. There is evidence that similar gene families also exist in other plants. Two of these RNA polymerases are putative mitochondrial enzymes, whereas the third one may represent the nuclear-encoded RNA polymerase (NEP) active in plastids. In addition, plastid genes are transcribed from another, entirely different multisubunit eubacterial-type RNA polymerase, the core subunits of which are encoded by plastid genes [plastid-encoded RNA polymerase (PEP)]. This core enzyme is complemented by one of several nuclear-encoded sigma-like factors. The development of photosynthetically active chloroplasts requires both PEP and NEP. Most NEP promoters show certain similarities to mitochondrial promoters in that they include the sequence motif 5'-YRTA-3' near the transcription initiation site. PEP promoters are similar to bacterial promoters of the -10/-35 sigma 70 type.

Effects of divalent metal ions on the activity and conformation of native and 3-fluorotyrosine-PvuII endonucleases

The activities of restriction enzymes are important examples of Mg(II)-dependent hydrolysis of DNA. While a number of crystallographic studies of enzyme-DNA complexes have also involved metal ions, there have been no solution studies exploring the relationship between enzyme conformation and metal-ion binding in restriction enzymes. Using PvuII restriction endonuclease as a model system, we have successfully developed biosynthetic fluorination and NMR spectroscopy as a solution probe of restriction-enzyme conformation. The utility of this method is demonstrated with a study of metal-ion binding by PvuII endonuclease. Replacement of 74% (+/- 10%) of the Tyr residues in PvuII endonuclease by 3-fluorotyrosine produces an enzyme with Mg(II)-supported specific activity and sequence specificity that is indistinguishable from that of the native enzyme. Mn(II) supports residual activity of both the native and fluorinated enzymes; Ca(II) does not support activity in either enzyme, a result consistent with previous studies. 1H- and 19F-NMR spectroscopic studies reveal that while Mg(II) does not alter the enzyme conformation, the paramagnetic Mn(II) produces both short-range spectral broadening and longer range changes in chemical shift. Most interestingly, Ca(II) binding perturbs a larger number of different resonances than Mn(II). Coupled with earlier mutagenesis studies that place Ca(II) in the active site [Nastri, H. G., Evans, P.D., Walker, I.H. & Riggs, P.D. (1997) J. Biol. Chem. 272, 25761-25767], these data suggest that the enzyme makes conformational adjustments to accommodate the distinct geometric preferences of Ca(II) and may play a role in the inability of this metal ion to support activity in restriction enzymes.

The CCA-adding enzyme has a single active site

The CCA-adding enzyme (tRNA nucleotidyltransferase) synthesizes and repairs the 3'-terminal CCA sequence of tRNA. The eubacterial, eukaryotic, and archaeal CCA-adding enzymes all share a single active-site signature motif, which identifies these enzymes as belonging to the nucleotidyltransferase superfamily. Here we show that mutations at Asp-53 or Asp-55 of the Sulfolobus shibatae signature sequence abolish addition of both C and A, demonstrating that a single active site is responsible for addition of both nucleotides. Mutations at Asp-106 (and to a lesser extent, at Glu-173 and Asp-215) selectively impaired addition of A, but not C. We have previously demonstrated that the tRNA acceptor stem remains fixed on the surface of the CCA-adding enzyme during C and A addition (Shi, P.-Y., Maizels, N., and Weiner, A. M. (1998) EMBO J. 17, 3197-3206). Taken together with this new evidence that there is a single active site for catalysis, our data suggest that specificity of nucleotide addition is determined by a process of collaborative templating: as the single active site catalyzes addition of each nucleotide, the growing 3'-end of the tRNA would progressively refold to create a binding pocket for addition of the next nucleotide.

Specificity in transcriptional regulation in the absence of specific DNA binding sites: the case of T7 lysozyme

The binding of T7 lysozyme to T7 RNAP increases the apparent Km for NTP during initiation (formation of the first phosphodiester bond). It also increases the dissociation constant and dissociation rate of product dinucleotide from the polymerase. Higher NTP concentrations are required for maximal rates of productive initiation from T7 class II versus class III promoters, though individual promoters display distinct responses to changes in NTP concentrations. The greater degree of repression of class II versus class III promoters by T7 lysozyme, which appears to be important for the switch to class III gene expression during the phage life cycle, might therefore be a consequence of: (1) T7 lysozyme generally reducing the affinity of the polymerase for NTPs and increasing the rate of release of transcripts, and (2), intrinsically higher NTP concentration requirements for productive initiation from class II promoters. T7 lysozyme is also found to inhibit the addition of untemplated bases to the transcript which can occur when the elongation complex reaches the end of a template, and its effects are qualitatively similar to those reported for mutations in the extreme C terminus of T7 RNAP. Together with the locations of polymerase mutations which cause resistance or hypersensitivity to T7 lysozyme, these observations suggest that the structural mechanism of lysozyme action might include conformational changes in the C-terminal loop (aa. approximately 820-883) of T7 RNAP.

Recognition sites of 3'-OH group by T7 RNA polymerase and its application to transcriptional sequencing

When analyzing the elongation mechanisms in T7 RNA polymerase (T7 RNAP)by using site-directed mutagenesis and a protein expression system, we identified the recognition sites of the rNTP 3'-OH group in T7 RNAP. On the basis of three-dimensional crystal structure analysis, we selected and analyzed six candidate sites interacting with the 3'-OH group of rNTP in T7 RNAP. We found that the Phe-644 and Phe-667 sites are responsible for the high selectivity of T7 RNAP for rNTPs. Also, we constructed the protein mutations of these residues, F644Y and F667Y, which display a >200-fold higher affinity than the wild type for 3'-dNTPs. These findings indicate that the phenylalanine residues of 644 and 667 specifically interact with the 3'-OH group. Thus, these mutants, F644Y and F667Y, with incorporation of 3'-dNTP terminators, which is similar to native rNTPs, can offer low backgrounds and equal intensities of the sequencing ladders in our method, called "transcriptional sequencing. "

Role of open complex instability in kinetic promoter selection by bacteriophage T7 RNA polymerase

By measuring steady-state rates of dinucleotide synthesis on double-stranded (d.s.) and partially single-stranded (p.s.s.) promoters, and topological unwinding due to open complex formation on plasmids, we have obtained evidence that open complex formation in bacteriophage T7 RNA polymerase:promoter binary complexes is thermodynamically disfavored and that the rate of collapse of the open complex is competitive with the rate of transcription initiation. It is suggested that open complex instability is a kinetic mechanism that allows T7 RNA polymerase (RNAP) to achieve promoter specificity while still allowing for efficient promoter release. Open complex instability could also provide a mechanism for modulating the KM for the initiating NTPs so as to allow different promoters to respond differently to physiological changes in NTP concentration.

Identification of a minimal binding element within the T7 RNA polymerase promoter

The T7 RNA polymerase promoter has been proposed to contain two domains: the binding region upstream of position -5 is recognized through apparently traditional duplex contacts, while the catalytic domain downstream of position -5 is bound in a melted configuration. This model is tested by following polymerase binding to a series of synthetic oligonucleotides representing truncations of the consensus promoter sequence. The increase in the fluorescence anisotropy of a rhodamine dye linked to the upstream end of the promoter provides a very sensitive measure of enzyme binding in simple thermodynamic titrations, and allows the determination of both increases and decreases in the dissociation constant. The best fit value of Kd=4.0 nM for the native promoter is in good agreement with previous fluorescence and steady state measurements. Deletion of the downstream DNA up to position -1 or to position -5 leads to a fivefold increase in binding, while further sequential single-base deletions upstream result in 20 and 500-fold decreases in binding. These results indicate that the (duplex) region of the promoter upstream of and including position -5 is both necessary and sufficient for tight binding, and represents the core binding element of the promoter. We propose a model in which part of the upstream binding energy is used by T7 RNA polymerase to melt the downstream initiation region of the promoter. We also show that the presence of magnesium is necessary for optimal binding, but not for specific enzyme-promoter complex formation, and we propose that magnesium is not required for melting of the promoter.

A model for the mechanism of polymerase translocation

A general mechanism for polymerase translocation is elaborated. The central feature of this mechanism is that a rapid translocational equilibrium is established after each cycle of nucleoside monophosphate incorporation such that the polymerase distributes itself by diffusional sliding between all accessible positions on the template with relative occupancy determined by relative free energy. While alternative models for translocation have not been fully developed, much of the language currently used to describe this step suggests an active mechanism coupled to conformational transitions in the polymerase. For example, a recent study of force generation by Escherichia coli RNA polymerase during transcription suggests that it is a mechanoenzyme analogous to kinesin of myosin motor proteins. While the proposed mechanism does not rule out conformational transitions during polymerase translocation, it suggests that they may be unnecessary and that translocation can be explained in terms of the affinity of the active site for nucleoside triphosphate and the relative free energies of the polymerase bound at different positions on the template. This mechanism makes specific predictions which are borne out experimentally with polymerases as distinct as E. coli DNAP I, phage T7 RNAP, and E. coli RNAP.