Polymerization and in vitro motility properties of yeast actin: a comparison with rabbit skeletal alpha-actin

Specialization of actin isoforms derived from the loss of key interactions with regulatory factors

A paradox of eukaryotic cells is that while some species assemble a complex actin cytoskeleton from a single ortholog, other species utilize a greater diversity of actin isoforms. The physiological consequences of using different actin isoforms, and the molecular mechanisms by which highly conserved actin isoforms are segregated into distinct networks, are poorly known. Here, we sought to understand how a simple biological system, composed of a unique actin and a limited set of actin‐binding proteins, reacts to a switch to heterologous actin expression. Using yeast as a model system and biomimetic assays, we show that such perturbation causes drastic reorganization of the actin cytoskeleton. Our results indicate that defective interaction of a heterologous actin for important regulators of actin assembly limits certain actin assembly pathways while reinforcing others. Expression of two heterologous actin variants, each specialized in assembling a different network, rescues cytoskeletal organization and confers resistance to external perturbation. Hence, while species using a unique actin have homeostatic actin networks, actin assembly pathways in species using several actin isoforms may act more independently.

Diversity from similarity: cellular strategies for assigning particular identities to actin filaments and networks

The actin cytoskeleton has the particularity of being assembled into many functionally distinct filamentous networks from a common reservoir of monomeric actin. Each of these networks has its own geometrical, dynamical and mechanical properties, because they are capable of recruiting specific families of actin-binding proteins (ABPs), while excluding the others. This review discusses our current understanding of the underlying molecular mechanisms that cells have developed over the course of evolution to segregate ABPs to appropriate actin networks. Segregation of ABPs requires the ability to distinguish actin networks as different substrates for ABPs, which is regulated in three different ways: (1) by the geometrical organization of actin filaments within networks, which promotes or inhibits the accumulation of ABPs; (2) by the identity of the networks' filaments, which results from the decoration of actin filaments with additional proteins such as tropomyosin, from the use of different actin isoforms or from covalent modifications of actin; (3) by the existence of collaborative or competitive binding to actin filaments between two or multiple ABPs. This review highlights that all these effects need to be taken into account to understand the proper localization of ABPs in cells, and discusses what remains to be understood in this field of research.

Cooperative effects of tropomyosin on the dynamics of the actin filament

Tropomyosin (Tpm) plays an important role in regulating the organisation and functions of the actin cytoskeleton. Here, we describe a new approach to analyse the effects of Tpm on actin dynamics. Using F-actin proteolytically modified within the DNase-binding loop (ECP-actin), we show that Tpm binding almost completely suppresses the increased subunit exchange intrinsic for this F-actin. The effect is both concentration-dependent and cooperative, with half-maximal inhibition observed at about a 1 : 50 Tpm : actin ratio. Tpm decreases not only the number concentration of ECP-actin filaments, but also the rate of the filament subunit exchange. Our data suggest that Tpm regulates the dynamics of actin filaments by an allosteric strengthening of intermonomer contacts in the actin filament, and that this mechanism may be involved in the modulation of cytoskeletal dynamics.

Actomyosin based contraction: one mechanokinetic model from single molecules to muscle?

Bridging the gaps between experimental systems on different hierarchical scales is needed to overcome remaining challenges in the understanding of muscle contraction. Here, a mathematical model with well-characterized structural and biochemical actomyosin states is developed to that end. We hypothesize that this model accounts for generation of force and motion from single motor molecules to the large ensembles of muscle. In partial support of this idea, a wide range of contractile phenomena are reproduced without the need to invoke cooperative interactions or ad hoc states/transitions. However, remaining limitations exist, associated with ambiguities in available data for model definition e.g.: (1) the affinity of weakly bound cross-bridges, (2) the characteristics of the cross-bridge elasticity and (3) the exact mechanistic relationship between the force-generating transition and phosphate release in the actomyosin ATPase. Further, the simulated number of attached myosin heads in the in vitro motility assay differs several-fold from duty ratios, (fraction of strongly attached ATPase cycle times) derived in standard analysis. After addressing the mentioned issues the model should be useful in fundamental studies, for engineering of myosin motors as well as for studies of muscle disease and drug development.

Insights into the effects of disease-causing mutations in human actins

Mutations in all six actins in humans have now been shown to cause diseases. However, a number of factors have made it difficult to gain insight into how the changes in actin functions brought about by these pathogenic mutations result in the disease phenotype. These include the presence of multiple actins in the same cell, limited accessibility to pure mutant material, and complexities associated with the structures and their component cells that manifest the diseases. To try to circumvent these difficulties, investigators have turned to the use of model systems. This review describes these various approaches, the initial results obtained using them, and the insight they have provided into allosteric mechanisms that govern actin function. Although results so far have not explained a particular disease phenotype at the molecular level, they have provided valuable insight into actin function at the mechanistic level which can be utilized in the future to delineate the molecular bases of these different actinopathies.

Unique ζ-chain motifs mediate a direct TCR-actin linkage critical for immunological synapse formation and T-cell activation

TCR-mediated activation induces receptor microclusters that evolve to a defined immune synapse (IS). Many studies showed that actin polymerization and remodeling, which create a scaffold critical to IS formation and stabilization, are TCR mediated. However, the mechanisms controlling simultaneous TCR and actin dynamic rearrangement in the IS are yet not fully understood. Herein, we identify two novel TCR ζ-chain motifs, mediating the TCR's direct interaction with actin and inducing actin bundling. While T cells expressing the ζ-chain mutated in these motifs lack cytoskeleton (actin) associated (cska)-TCRs, they express normal levels of non-cska and surface TCRs as cells expressing wild-type ζ-chain. However, such mutant cells are unable to display activation-dependent TCR clustering, IS formation, expression of CD25/CD69 activation markers, or produce/secrete cytokine, effects also seen in the corresponding APCs. We are the first to show a direct TCR-actin linkage, providing the missing gap linking between TCR-mediated Ag recognition, specific cytoskeleton orientation toward the T-cell-APC interacting pole and long-lived IS maintenance.

Structural states and dynamics of the D-loop in actin

Conformational changes induced by ATP hydrolysis on actin are involved in the regulation of complex actin networks. Previous structural and biochemical data implicate the DNase I binding loop (D-loop) of actin in such nucleotide-dependent changes. Here, we investigated the structural and conformational states of the D-loop (in solution) using cysteine scanning mutagenesis and site-directed labeling. The reactivity of D-loop cysteine mutants toward acrylodan and the mobility of spin labels on these mutants do not show patterns of an α-helical structure in monomeric and filamentous actin, irrespective of the bound nucleotide. Upon transition from monomeric to filamentous actin, acrylodan emission spectra and electron paramagnetic resonance line shapes of labeled mutants are blue-shifted and more immobilized, respectively, with the central residues (residues 43-47) showing the most drastic changes. Moreover, complex electron paramagnetic resonance line shapes of spin-labeled mutants suggest several conformational states of the D-loop. Together with a new (to our knowledge) actin crystal structure that reveals the D-loop in a unique hairpin conformation, our data suggest that the D-loop equilibrates in F-actin among different conformational states irrespective of the nucleotide state of actin.

Cofilin-linked changes in actin filament flexibility promote severing

The actin regulatory protein, cofilin, increases the bending and twisting elasticity of actin filaments and severs them. It has been proposed that filaments partially decorated with cofilin accumulate stress from thermally driven shape fluctuations at bare (stiff) and decorated (compliant) boundaries, thereby promoting severing. This mechanics-based severing model predicts that changes in actin filament compliance due to cofilin binding affect severing activity. Here, we test this prediction by evaluating how the severing activities of vertebrate and yeast cofilactin scale with the flexural rigidities determined from analysis of shape fluctuations. Yeast actin filaments are more compliant in bending than vertebrate actin filaments. Severing activities of cofilactin isoforms correlate with changes in filament flexibility. Vertebrate cofilin binds but does not increase the yeast actin filament flexibility, and does not sever them. Imaging of filament thermal fluctuations reveals that severing events are associated with local bending and fragmentation when deformations attain a critical angle. The critical severing angle at boundaries between bare and cofilin-decorated segments is smaller than in bare or fully decorated filaments. These measurements support a cofilin-severing mechanism in which mechanical asymmetry promotes local stress accumulation and fragmentation at boundaries of bare and cofilin-decorated segments, analogous to failure of some nonprotein materials.

Allele-specific effects of thoracic aortic aneurysm and dissection alpha-smooth muscle actin mutations on actin function

Twenty-two missense mutations in ACTA2, which encodes α-smooth muscle actin, have been identified to cause thoracic aortic aneurysm and dissection. Limited access to diseased tissue, the presence of multiple unresolvable actin isoforms in the cell, and lack of an animal model have prevented analysis of the biochemical mechanisms underlying this pathology. We have utilized actin from the yeast Saccharomyces cerevisiae, 86% identical to human α-smooth muscle actin, as a model. Two of the known human mutations, N115T and R116Q, were engineered into yeast actin, and their effect on actin function in vivo and in vitro was investigated. Both mutants exhibited reduced ability to grow under a variety of stress conditions, which hampered N115T cells more than R116Q cells. Both strains exhibited abnormal mitochondrial morphology indicative of a faulty actin cytoskeleton. In vitro, the mutant actins exhibited altered thermostability and nucleotide exchange rates, indicating effects of the mutations on monomer conformation, with R116Q the most severely affected. N115T demonstrated a biphasic elongation phase during polymerization, whereas R116Q demonstrated a markedly extended nucleation phase. Allele-specific effects were also seen on critical concentration, rate of depolymerization, and filament treadmilling. R116Q filaments were hypersensitive to severing by the actin-binding protein cofilin. In contrast, N115T filaments were hyposensitive to cofilin despite nearly normal binding affinities of actin for cofilin. The mutant-specific effects on actin behavior suggest that individual mechanisms may contribute to thoracic aortic aneurysm and dissection.

Purification of actin from fission yeast Schizosaccharomyces pombe and characterization of functional differences from muscle actin

Fission yeast Schizosaccharomyces pombe is an important genetic model organism for studying the mechanisms of endocytosis and cytokinesis. However, most work on the biochemical properties of fission yeast actin-binding proteins has been done with skeletal muscle actin for matters of convenience. When simulations of mathematical models of the mechanism of endocytosis were compared with events in live cells, some of the reactions appeared to be much faster than observed in biochemical experiments with muscle actin. Here, we used gelsolin affinity chromatography to purify actin from fission yeast. S. pombe actin shares many properties with skeletal muscle actin but has higher intrinsic nucleotide exchange rate, faster trimer nucleus formation, faster phosphate dissociation rate from polymerized actin, and faster nucleation of actin filaments with Arp2/3 complex. These properties close the gap between the biochemistry and predictions made by mathematical models of endocytosis in S. pombe cells.

Structural polymorphism in F-actin

Actin has maintained an exquisite degree of sequence conservation over large evolutionary distances for reasons that are not understood. The desire to explain phenomena from muscle contraction to cytokinesis in mechanistic detail has driven the generation of an atomic model of the actin filament (F-actin). Here we use electron cryomicroscopy to show that frozen-hydrated actin filaments contain a multiplicity of different structural states. We show (at ∼10 Å resolution) that subdomain 2 can be disordered and can make multiple contacts with the C terminus of a subunit above it. We link a number of disease-causing mutations in the human ACTA1 gene to the most structurally dynamic elements of actin. Because F-actin is structurally polymorphic, it cannot be described using only one atomic model and must be understood as an ensemble of different states.

A nucleotide state-sensing region on actin

The nucleotide state of actin (ATP, ADP-P(i), or ADP) is known to impact its interactions with other actin molecules upon polymerization as well as with multiple actin binding proteins both in the monomeric and filamentous states of actin. Recently, molecular dynamics simulations predicted that a sequence located at the interface of subdomains 1 and 3 (W-loop; residues 165-172) changes from an unstructured loop to a beta-turn conformation upon ATP hydrolysis (Zheng, X., Diraviyam, K., and Sept, D. (2007) Biophys. J. 93, 1277-1283). This region participates directly in the binding to other subunits in F-actin as well as to cofilin, profilin, and WH2 domain proteins and, therefore, could contribute to the nucleotide sensitivity of these interactions. The present study demonstrates a reciprocal communication between the W-loop region and the nucleotide binding cleft on actin. Point mutagenesis of residues 167, 169, and 170 and their site-specific labeling significantly affect the nucleotide release from the cleft region, whereas the ATP/ADP switch alters the fluorescence of probes located in the W-loop. In the ADP-P(i) state, the W-loop adopts a conformation similar to that in the ATP state but different from the ADP state. Binding of latrunculin A to the nucleotide cleft favors the ATP-like conformation of the W-loop, whereas ADP-ribosylation of Arg-177 forces the W-loop into a conformation distinct from those in the ADP and ATP-states. Overall, our experimental data suggest that the W-loop of actin is a nucleotide sensor, which may contribute to the nucleotide state-dependent changes in F-actin and nucleotide state-modulated interactions of both G- and F-actin with actin-binding proteins.

A potential yeast actin allosteric conduit dependent on hydrophobic core residues val-76 and trp-79

Intramolecular allosteric interactions responsible for actin conformational regulation are largely unknown. Previous work demonstrated that replacing yeast actin Val-76 with muscle actin Ile caused decreased nucleotide exchange. Residue 76 abuts Trp-79 in a six-residue linear array beginning with Lys-118 on the surface and ending with His-73 in the nucleotide cleft. To test if altering the degree of packing of these two residues would affect actin dynamics, we constructed V76I, W79F, and W79Y single mutants as well as the Ile-76/Phe-79 and Ile-76/Tyr-79 double mutants. Tyr or Phe should decrease crowding and increase protein flexibility. Subsequent introduction of Ile should restore packing and dampen changes. All mutants showed decreased growth in liquid medium. W79Y alone was severely osmosensitive and exhibited vacuole abnormalities. Both properties were rescued by Ile-76. Phe-79 or Tyr decreased the thermostability of actin and increased its nucleotide exchange rate. These effects, generally greater for Tyr than for Phe, were reversed by introduction of Ile-76. HD exchange showed that the mutations caused propagated conformational changes to all four subdomains. Based on results from phosphate release and light-scattering assays, single mutations affected polymerization in the order of Ile, Phe, and Tyr from least to most. Introduction of Ile-76 partially rescued the polymerization defects caused by either Tyr-79 or Phe-79. Thus, alterations in crowding of the 76-79 residue pair can strongly affect actin conformation and behavior, and these results support the theory that the amino acid array in which they are located may play a central role in actin regulation.

Mapping of drebrin binding site on F-actin

Drebrin is a filament-binding protein involved in organizing the dendritic pool of actin. Previous in vivo studies identified the actin-binding domain of drebrin (DrABD), which causes the same rearrangements in the cytoskeleton as the full-length protein. Site-directed mutagenesis, electron microscopic reconstruction, and chemical cross-linking combined with mass spectrometry analysis were employed here to map the DrABD binding interface on actin filaments. DrABD could be simultaneously attached to two adjacent actin protomers using the combination of 2-iminothiolane (Traut's reagent) and MTS1 [1,1-methanediyl bis(methanethiosulfonate)]. Site-directed mutagenesis combined with chemical cross-linking revealed that residue 238 of DrABD is located within 5.4 A from C374 of actin protomer 1 and that native cysteine 308 of drebrin is near C374 of actin protomer 2. Mass spectrometry analysis revealed that a zero-length cross-linker, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, can link the N-terminal G-S extension of the recombinant DrABD to E99 and/or E100 on actin. Efficient cross-linking of drebrin residues 238, 248, 252, 270, and 271 to actin residue 51 was achieved with reagents of different lengths (5.4-19 A). These results suggest that the "core" DrABD is centered on actin subdomain 2 and may adopt a folded conformation upon binding to F-actin. The results of electron microscopic reconstruction, which are in a good agreement with the cross-linking data, revealed polymorphism in DrABD binding to F-actin and suggested the existence of two binding sites. These results provide new structural insight into the previously observed competition between drebrin and several other F-actin-binding proteins.

F-actin structure destabilization and DNase I binding loop: fluctuations mutational cross-linking and electron microscopy analysis of loop states and effects on F-actin

The conformational dynamics of filamentous actin (F-actin) is essential for the regulation and functions of cellular actin networks. The main contribution to F-actin dynamics and its multiple conformational states arises from the mobility and flexibility of the DNase I binding loop (D-loop; residues 40-50) on subdomain 2. Therefore, we explored the structural constraints on D-loop plasticity at the F-actin interprotomer space by probing its dynamic interactions with the hydrophobic loop (H-loop), the C-terminus, and the W-loop via mutational disulfide cross-linking. To this end, residues of the D-loop were mutated to cysteines on yeast actin with a C374A background. These mutants showed no major changes in their polymerization and nucleotide exchange properties compared to wild-type actin. Copper-catalyzed disulfide cross-linking was investigated in equimolar copolymers of cysteine mutants from the D-loop with either wild-type (C374) actin or mutant S265C/C374A (on the H-loop) or mutant F169C/C374A (on the W-loop). Remarkably, all tested residues of the D-loop could be cross-linked to residues 374, 265, and 169 by disulfide bonds, demonstrating the plasticity of the interprotomer region. However, each cross-link resulted in different effects on the filament structure, as detected by electron microscopy and light-scattering measurements. Disulfide cross-linking in the longitudinal orientation produced mostly no visible changes in filament morphology, whereas the cross-linking of D-loop residues >45 to the H-loop, in the lateral direction, resulted in filament disruption and the presence of amorphous aggregates on electron microscopy images. A similar aggregation was also observed upon cross-linking the residues of the D-loop (>41) to residue 169. The effects of disulfide cross-links on F-actin stability were only partially accounted for by the simulations of current F-actin models. Thus, our results present evidence for the high level of conformational plasticity in the interprotomer space and document the link between D-loop interactions and F-actin stability.

Allele-specific effects of human deafness gamma-actin mutations (DFNA20/26) on the actin/cofilin interaction

Auditory hair cell function requires proper assembly and regulation of the nonmuscle gamma isoactin-rich cytoskeleton, and six point mutations in this isoactin cause a type of delayed onset autosomal dominant nonsyndromic progressive hearing loss, DFNA20/26. The molecular basis underlying this actin-dependent hearing loss is unknown. To address this problem, the mutations have been introduced into yeast actin, and their effects on actin function were assessed in vivo and in vitro. Because we previously showed that polymerization was unaffected in five of the six mutants, we have focused on proteins that regulate actin, in particular cofilin, which severs F-actin and sequesters actin monomers. The mutations do not affect the interaction of cofilin with G-actin. However, T89I and V370A mutant F-actins are much more susceptible to cofilin disassembly than WT filaments in vitro. Conversely, P332A filaments demonstrate enhanced resistance. Wild type actin solutions containing T89I, K118M, or P332A mutant actins at mole fractions similar to those found in the hair cell respond in vitro toward cofilin in a manner proportional to the level of the mutant present. Finally, depression of cofilin action in vivo by elimination of the cofilin-activating protein, Aip1p, rescues the inability to grow on glycerol caused by K118M, T278I, P332A, and V370A. These results suggest that a filament instability caused by these mutations can be balanced by decreasing a system in vivo that promotes increased filament turnover. Such mutant-dependent filament destabilization could easily result in hair cell malfunction leading to the late-onset hearing loss observed in these patients.

Differential regulation of actin polymerization and structure by yeast formin isoforms

The budding yeast formins, Bnr1 and Bni1, behave very differently with respect to their interactions with muscle actin. However, the mechanisms underlying these differences are unclear, and these formins do not interact with muscle actin in vivo. We use yeast wild type and mutant actins to further assess these differences between Bnr1 and Bni1. Low ionic strength G-buffer does not promote actin polymerization. However, Bnr1, but not Bni1, causes the polymerization of pyrene-labeled Mg-G-actin in G-buffer into single filaments based on fluorometric and EM observations. Polymerization by Bnr1 does not occur with Ca-G-actin. By cosedimentation, maximum filament formation occurs at a Bnr1:actin ratio of 1:2. The interaction of Bnr1 with pyrene-labeled S265C Mg-actin yields a pyrene excimer peak, from the cross-strand interaction of pyrene probes, which only occurs in the context of F-actin. In F-buffer, Bnr1 promotes much faster yeast actin polymerization than Bni1. It also bundles the F-actin in contrast to the low ionic strength situation where only single filaments form. Thus, the differences previously observed with muscle actin are not actin isoform-specific. The binding of both formins to F-actin saturate at an equimolar ratio, but only about 30% of each formin cosediments with F-actin. Finally, addition of Bnr1 but not Bni1 to pyrene-labeled wild type and S265C Mg-F actins enhanced the pyrene- and pyrene-excimer fluorescence, respectively, suggesting Bnr1 also alters F-actin structure. These differences may facilitate the ability of Bnr1 to form the actin cables needed for polarized delivery of nutrients and organelles to the growing yeast bud.

Properties of actin from the fission yeast Schizosaccharomyces pombe and interaction with fission yeast profilin

The fission yeast Schizosaccharomyces pombe serves as a model system for studying role of actin cytoskeleton, since it has simple actin cytoskeletons and is genetically tractable. In contrast, biochemical approaches using this organism are still developing; fission yeast actin has so far not been isolated in its native form and characterized, and therefore, biochemical assays of fission yeast actin-binding proteins (ABPs) or myosin have been performed using rabbit skeletal muscle actin that may interact with the fission yeast ABPs in a manner different from fission yeast actin. Here, we report a novel method for isolating functionally active actin from fission yeast cells. The highly purified fission yeast actin polymerized with kinetics somewhat different from those of muscle actin and forms filaments that are structurally indistinguishable from skeletal muscle actin filaments. The fission yeast actin was a significantly weaker activator of Mg(2+)-ATPase of HMM of skeletal muscle myosin than muscle actin. The fission yeast profilin Cdc3 suppressed polymerization of fission yeast actin more effectively than that of muscle actin and showed an affinity for fission yeast actin higher than for muscle actin. The establishment of purification of fission yeast actin will enable reconstruction of physiologically relevant interactions between the actin and fission yeast ABPs or myosins and contribute to clarification of function of actin cytoskeleton in various cellular activities.

Annexins: putative linkers in dynamic membrane-cytoskeleton interactions in plant cells

The plasma membrane, the most external cellular structure, is at the forefront between the plant cell and its environment. Hence, it is naturally adapted to function in detection of external signals, their transduction throughout the cell, and finally, in cell reactions. Membrane lipids and the cytoskeleton, once regarded as simple and static structures, have recently been recognized as significant players in signal transduction. Proteins involved in signal detection and transduction are organised in specific domains at the plasma membrane. Their aggregation allows to bring together and orient the downstream and upstream members of signalling pathways. The cortical cytoskeleton provides a structural framework for rapid signal transduction from the cell periphery into the nucleus. It leads to intracellular reorganisation and wide-scale modulation of cellular metabolism which results in accumulation of newly synthesised proteins and/or secondary metabolites which, in turn, have to be distributed to the appropriate cell compartments. And again, in plant cells, the secretory vesicles that govern polar cellular transport are delivered to their target membranes by interaction with actin microfilaments. In search for factors that could govern subsequent steps of the cell response delineated above we focused on an evolutionary conserved protein family, the annexins, that bind in a calcium-dependent manner to membrane phospholipids. Annexins were proposed to regulate dynamic changes in membrane architecture and to organise the interface between secretory vesicles and the membrane. Certain proteins from this family were also identified as actin binding, making them ideal mediators in cell membrane and cytoskeleton interactions.

Effect of the substitution of muscle actin-specific subdomain 1 and 2 residues in yeast actin on actin function

Muscle and yeast actins display distinct behavioral characteristics. To better understand the allosteric interactions that regulate actin function, we created a muscle/yeast hybrid actin containing a muscle-specific outer domain (subdomains 1 and 2) and a yeast inner domain (subdomains 3 and 4). Actin with muscle subdomain 1 and the two yeast N-terminal negative charges supported viability. The four negative charge muscle N terminus in a muscle subdomain 1 background caused death, but in the same background actin with three N-terminal acidic residues (3Ac/Sub1) led to sick but viable cells. Addition of three muscle subdomain 2 residues (3Ac/Sub12) produced no further deleterious effects. These hybrid actins caused depolarized cytoskeletons, abnormal vacuoles, and mitochondrial and endocytosis defects. 3Ac/Sub1 G-actin exchanged bound epsilonATP more slowly than wild type actin, and the exchange rate for 3Ac/Sub12 was even slower, similar to that for muscle actin. The mutant actins polymerized faster and produced less stable and shorter filaments than yeast actin, the opposite of that expected for muscle actin. Unlike wild type actin, in the absence of unbound ATP, polymerization led to ADP-F-actin, which rapidly depolymerized. Like yeast actin, the hybrid actins activated muscle myosin S1 ATPase activity only about one-eighth as well as muscle actin, despite having essentially a muscle actin-specific myosin-binding site. Finally, the hybrid actins behaved abnormally in a yeast Arp2/3-dependent polymerization assay. Our results demonstrate a unique sensitivity of yeast to actin N-terminal negative charge density. They also provide insight into the role of each domain in the control of the various functions of actin.

Detection of small differences in actomyosin function using actin labeled with different phalloidin conjugates

This study shows that there is only a negligible difference in actomyosin function in the in vitro motility assay among actin filaments labeled with Rhodamine phalloidin (RhPh), Alexa-488 phalloidin (APh), and biotin-XX phalloidin (BPh). Similar results were obtained at varying ionic strengths (0.02-0.13 M), in the presence of imidazole or 3-[N-morpholino]propanesulfonic acid (MOPS) buffer, and at varying MgATP concentrations (0.1-3 mM). If RhPh- and APh-labeled filaments were studied in a given flow cell, there was minimal variability in sliding velocity between the fluorophores (standard deviation of 3% of the absolute sliding velocity). The variability was considerably smaller than that between flow cells, allowing us to use dual labeling of different actin types and then apply analysis of variance to detect minor functional differences between them. Using this method, we could statistically verify a 4% difference (P<0.001) in sliding velocity (3mM Mg ATP) between cardiac and skeletal muscle actin. Suggested improvements of the method would readily allow the detection of even smaller differences. We discuss implications of the results for nanotechnological applications, understanding actomyosin function, and reducing experimental costs and the use of laboratory animals.

Malaria Parasite Actin Filaments are Very Short

A novel form of actomyosin regulation has recently been proposed in which the polymerisation of new actin filaments regulates apicomplexan parasite motility. Here, we identified actin I in the merozoites of Plasmodium falciparum by mass spectrometry. The only post-translational modification is acetylation of the N terminus (acetyl-Gly-Glu-actin), while methylation of histidine 73, a common modification for actin, is absent. Results obtained with anti-actin antibodies suggest that, in contrast to a previous report, there is no actin-ubiquitin conjugate in merozoites. About half of the extracted monomeric actin polymerised and actin filaments could be sedimented at 500,000g. In contrast, centrifugation at 100,000g, conditions commonly used to sediment filamentous actin, yielded very little F-actin. In a functional characterisation using an in vitro motility assay, actin filaments moved over myosin at a velocity indistinguishable from that of rabbit skeletal actin. Filament length, however, was too short to be resolved by conventional fluorescence microscopy. On electron micrographs an average filament length of approximately 100nm was determined. We also identified by mass spectrometry proteins co-purifying with filamentous actin, which are potential actin-binding proteins. Our results demonstrate differences in actin filament dynamics for an apicomplexan parasite, which could be due to specific properties of the actin and/or actin-regulatory proteins.

Acceleration of yeast actin polymerization by yeast Arp2/3 complex does not require an Arp2/3-activating protein

The Arp2/3 complex creates filament branches leading to an enhancement in the rate of actin polymerization. Work with Arp complexes from different sources indicated that it was inactive by itself, required an activating factor such as the Wiskott-Aldrich syndrome protein (WASP), and might exhibit a preference for ATP or ADP-P(i) actin. However, with yeast actin, P(i) release is almost concurrent with polymerization, eliminating the presence of an ADP-P(i) cap. We thus investigated the ability of the yeast Arp2/3 complex (yArp2/3) to facilitate yeast actin polymerization in the presence and absence of the Arp2/3-activating factor Las17p WA. yArp2/3 significantly accelerates yeast actin but not muscle actin polymerization in the absence of Las17p WA. The addition of Las17p WA further enhances yeast actin polymerization by yArp2/3 and allows the complex to now assist muscle actin polymerization. This actin isoform difference is not observed with bovine Arp2/3 complex, because the neural WASP VCA fragment is required for polymerization of both actins. Observation of individual branching filaments showed that Las17p WA increased the persistence of filament branches. Compared with wild type actin, the V159N mutant actin, proposed to be more ATP-like in behavior, exhibited an enhanced rate of polymerization in the presence of the yArp2/3 complex. yArp2/3 caused a significant rate of P(i) release prior to observation of an increase in filament mass but while branched structures were present. Thus, yeast F-actin can serve as a primary yArp2/3-activating factor, indicating that a newly formed yeast actin filament has a topology, unlike that of muscle actin, that is recognized specifically by yArp2/3.

Cofilin binding to muscle and non-muscle actin filaments: isoform-dependent cooperative interactions

I have monitored equilibrium binding of human cofilin to rabbit skeletal muscle (alpha) and human non-muscle (85% beta, 15% gamma) actin filaments from the quenching of pyrene actin fluorescence. Filament binding is cooperative and stoichiometric (i.e. one cofilin molecule per actin subunit) for both actin isoforms. The Hill coefficient for binding to betagamma-actin filaments (n(H)=3.5) is greater than for muscle actin (n(H)=2.3). Analysis of equilibrium binding using a nearest-neighbor cooperativity model indicates that the intrinsic affinities for binding to an isolated site are comparable (10-14 microM) for both filament isoforms but the cooperative free energy is greater for binding betagamma-actin filaments. The predicted cofilin cluster sizes and filament binding densities are small at concentrations of cofilin where efficient filament severing is observed, indicating that a few bound cofilin molecules are sufficient to destabilize the filament lattice and promote fragmentation. The analysis used in this study provides a framework for evaluating proton and ion linkage and effects of regulatory proteins on cofilin binding and severing of actin filaments.

Silanized surfaces for in vitro studies of actomyosin function and nanotechnology applications

We have previously shown that selective heavy meromyosin (HMM) adsorption to predefined regions of nanostructured polymer resist surfaces may be used to produce a nanostructured in vitro motility assay. However, actomyosin function was of lower quality than on conventional nitrocellulose films. We have therefore studied actomyosin function on differently derivatized glass surfaces with the aim to find a substitute for the polymer resists. We have found that surfaces derivatized with trimethylchlorosilane (TMCS) were superior to all other surfaces tested, including nitrocellulose. High-quality actin filament motility was observed up to 6 days after incubation with HMM and the fraction of motile actin filaments and the velocity of smooth sliding were generally higher on TMCS than on nitrocellulose. The actomyosin function on TMCS-derivatized glass and nitrocellulose is considered in relation to roughness and hydrophobicity of these surfaces. The results suggest that TMCS is an ideal substitute for polymer resists in the nanostructured in vitro motility assay. Furthermore, TMCS derivatized glass also seems to offer several advantages over nitrocellulose for HMM adsorption in the ordinary in vitro motility assay.

Thin filament regulation and ionic interactions between the N-terminal region in actin and troponin

The N-terminal region in actin has been shown to interact with both myosin and troponin (Tn) during the cross-bridge cycle and in regulation. To study the role of this region in regulation, we used yeast actin mutants with increased and decreased numbers of acidic residues. The mutants included D24A/D25A, with Asp(24) and Asp(25) replaced with alanines; DNEQ, with the substitution of Asp(2) and Glu(4) with their amide analogs; and 4Ac, with Glu(3) and Asp(4) inserted in lieu of Ser(3). In the in vitro motility assay, using reconstituted regulated thin filaments, the sliding speeds of DNEQ, D24A/D25A, and 4Ac were similar at all pCa values. Thus, Ca(2+)-sensitivity of the thin filaments and the inhibitory function of TnI appear to be insensitive to changes in charge (+/-2) at the N-terminus of actin, suggesting little, if any, role of that actin region in regulation. A Ca(2+)-independent conformational change in that region was detected upon troponin binding to actin-Tm via an increase in the fluorescence of a pyrene probe attached to another yeast actin mutant that we used (Cys(1)).

GTP-yeast actin

Because of the apparently greater conformational flexibility of yeast versus muscle actin and the ability of other members in the actin protein superfamily to efficiently use both ATP and GTP, we assessed the ability of yeast actin to function with GTP. Etheno-ATP exchange studies showed that the binding of GTP to yeast actin is about 1/9 as tight as that of ATP in contrast to the 1/1,240 ratio for muscle actin. Proteolysis of GTP-bound G-yeast actin suggests that the conformation of subdomain 2 is very much like that of ATP-bound actin, but CD studies show that GTP-bound actin is less thermostable than ATP-bound actin. GTP-actin polymerizes with an apparent critical concentration of 1.5 microm, higher than that of ATP-actin (0.3 microm) although filament structures observed by electron microscopy were similar. Yeast actin hydrolyzes GTP in a polymerization-dependent manner, and GTP-bound F-actin decorates with the myosin S1. Conversion of Phe(306) in the nucleotide binding site to the Tyr found in muscle actin raised the nucleotide discrimination ratio from the 1/9 of wild-type actin to 1/125. This result agrees with modeling that predicts that removal of the Tyr hydroxyl will create a space for the C2 amino group of the GTP guanine.

Functional studies of yeast actin mutants corresponding to human cardiomyopathy mutations

The molecular mechanisms by which different mutations in actin lead to distinct cardiomyopathies are unknown. Here, actin mutants corresponding to alpha-cardiac actin mutations causing hypertrophic cardiomyopathy [(HCM) P164A and A331P] and dilated cardiomyopathy [(DCM) R312H and E361G] were expressed in yeast and purified for in vitro functional studies. While P164A appeared unaltered compared to wild-type (WT) actin, A331P function was impaired. A331P showed reduced stability in circular dichroism melting experiments; its monomer unfolding transition was 10 degrees C lower compared to WT actin. Additionally, in vitro filament formation was hampered, and yeast cell cultures were temperature sensitive, implying perturbations in actin-actin interactions. Filament instability of the A331P mutant actin could lead to actomyosin dysfunction observed in HCM. Yeast strains harboring the R312H mutation did not grow well in culture, suggesting that cell viability is compromised. The E361G substitution is located at an alpha-actinin binding region where the actin filament is anchored. The mutant actin, though unaltered in the in vitro motility and standard actomyosin functions, had a threefold reduction in alpha-actinin binding. This could result in impairment of force-transduction in muscle fibers, and a DCM phenotype.

Regulation of yeast actin behavior by interaction of charged residues across the interdomain cleft

His(73) participates in the regulation of the nucleotide binding cleft conformation in yeast actin. Earlier molecular dynamics studies suggested that Asp(184) interacts with His(73) thereby stabilizing a "closed-cleft" G-actin. However, beta-actin in the open-cleft state shows a closer interaction of His(73) with Asp(179) than with Asp(184). We have thus assessed the relative importance of Asp(184) and Asp(179) on yeast actin stability and function. Neutral substitutions at 184 or 179 alone had little adverse effect on the monomer and polymerization behavior of actin. Arg or His at 184 in H73E actin partially rescued the monomeric properties of H73E actin, as demonstrated by near-normal thermostability and wild-type (WT)-like protease digestion patterns. ATP exchange was still considerably faster than with WT-actin although slower than that of H73E alone. However, polymerization of H73E/D184R and H73E/D184H is worse than with H73E alone. Conversely, D179R rescued all monomeric properties of H73E to near WT values and largely restored polymerization rate and filament thermostability. These results and new simulations of G-actin in the "open" state underscore the importance of the His(73)-Asp(179) interaction and suggest that the open and not the closed state of yeast actin may be favored in the absence of the methyl group of His(73).

Role of the DNase-I-binding loop in dynamic properties of actin filament

Effects of proteolytic modifications of the DNase-I-binding loop (residues 39-51) in subdomain 2 of actin on F-actin dynamics were investigated by measuring the rates of the polymer subunit exchange with the monomer pool at steady state and of ATP hydrolysis associated with it, and by determination of relative rate constants for monomer addition to and dissociation from the polymer ends. Cleavage of actin between Gly-42 and Val-43 by protease ECP32 resulted in enhancement of the turnover rate of polymer subunits by an order of magnitude or more, in contrast to less than a threefold increase produced by subtilisin cleavage between Met-47 and Gly-48. Probing the structure of the modified actins by limited digestion with trypsin revealed a correlation between the increased F-actin dynamics and a change in the conformation of subdomain 2, indicating a more open state of the filament subunits relative to intact F-actin. The cleavage with trypsin and steady-state ATPase were cooperatively inhibited by phalloidin, with half-maximal effects at phalloidin to actin molar ratio of 1:8 and full inhibition at a 1:1 ratio. The results support F-actin models in which only the N-terminal segment of loop 39-51 is involved in monomer-monomer contacts, and suggest a possibility of regulation of actin dynamics in the cell through allosteric effects on this segment of the actin polypeptide chain.

Probing the structure of F-actin: cross-links constrain atomic models and modify actin dynamics

Cross-links between protomers in F-actin can be used as a very sensitive probe of both the dynamics and structure of F-actin. We have characterized filaments formed from a previously described yeast actin Q41C mutant, where disulfide bonds can be formed between the Cys41 that is introduced into subdomain-2 and Cys374 on an adjacent protomer. We find that the distribution of cross-linked n-mers shows no cooperativity and corresponds to a random probability cross-linking reaction. The random distribution suggests that disulfide formation does not cause a significant perturbation of the F-actin structure. Consistent with this lack of perturbation, three-dimensional reconstructions of extensively cross-linked filaments, using a new approach to helical image analysis, show very small structural changes with respect to uncross-linked filaments. This finding is in conflict with refined models but in agreement with the original Holmes et al. model for F-actin. Under conditions where 94 % of the protomers are linked by disulfide bonds, the distribution of filament twist becomes more heterogeneous with respect to control filaments. A molecular model suggests that strain, introduced by the disulfide, is relieved by increasing the twist of the long-pitch actin helices. Disulfide formation makes yeast actin filaments approximately three times less flexible in terms of bending and similar, in this respect, to vertebrate skeletal muscle F-actin. These observations support previous reports that the rigidity of F-actin can be controlled by the position of subdomain-2, and that this region is more flexible in yeast F-actin than in skeletal muscle F-actin.

Functional specificity of actin isoforms

Actin, one of the main proteins of muscle and cytoskeleton, exists as a variety of highly conserved isoforms whose distribution in vertebrates is tissue-specific. Synthesis of specific actin isoforms is accompanied by their subcellular compartmentalization, with both processes being regulated by factors of cell proliferation and differentiation. Actin isoforms cannot substitute for each other, and the high-level synthesis of exogenous actins leads to alterations in cell organization and morphology. This indicates that the highly conserved actins are functionally specialized for the tissues in which they predominate. The first goal of this review is to analyze the data on the polymerizability of actin isoforms to show that cytoskeleton isoactins form less stable polymers than skeletal muscle actin. This difference correlates with the dynamics of actin microfilaments versus the stability of myofibrillar systems. The three-dimensional actin structure as well as progress in the analysis of conformational changes in both the actin monomer and the filament allows us to view the data on the structure and polymerization of isoactins in terms of structure-function relationships within the actin molecule. Most of the amino acid substitutions that distinguish actin isoforms are located apart from actin-actin contact sites in the polymer. We suggest that these substitutions can modulate the ability of actin monomers to form more or less stable polymers by long-range (allosteric) regulation of the contact sites.

Link between the enzymatic kinetics and mechanical behavior in an actomyosin motor

We have attempted to link the solution actomyosin ATPase with the mechanical properties of in vitro actin filament sliding over heavy meromyosin. To accomplish this we perturbed the system by altering the substrate with various NTPs and divalent cations, and by altering ionic strength. A wide variety of enzymatic and mechanical measurements were made under very similar solution conditions. Excellent correlations between the mechanical and enzymatic quantities were revealed. Analysis of these correlations based on a force-balance model led us to two fundamental equations, which can be described approximately as follows: the maximum sliding velocity is proportional to square root of V(max)K(m)(A), where K(m)(A) is the actin concentration at which the substrate turnover rate is half of its maximum (V(max)). The active force generated by a cross-bridge under no external load or under a small external load is proportional to square root of V(max)/K(m)(A). The equations successfully accounted for the correlations observed in the present study and observations in other laboratories.

Mutations in actin subdomain 3 that impair thin filament regulation by troponin and tropomyosin

Thin filament-mediated regulation of striated muscle contraction involves conformational switching among a few quaternary structures, with transitions induced by binding of Ca(2+) and myosin. We establish and exploit Saccharomyces cerevisiae actin as a model system to investigate this process. Ca(2+)-sensitive troponin-tropomyosin binding affinities for wild type yeast actin are seen to closely resemble those for muscle actin, and these hybrid thin filaments produce Ca(2+)-sensitive regulation of the myosin S-1 MgATPase rate. Yeast actin filament inner domain mutant K315A/E316A depresses Ca(2+) activation of the MgATPase rate, producing a 4-fold weakening of the apparent Ca(2+) affinity and a 50% decrease in the MgATPase rate at saturating Ca(2+) concentration. Observed destabilization of troponin-tropomyosin binding to actin in the presence of Ca(2+), a 1.4-fold effect, provides a partial explanation. Despite the decrease in apparent MgATPase Ca(2+) affinity, there was no detectable change in the true Ca(2+) affinity of the thin filament, measured using fluorophore-labeled troponin. Another inner domain mutant, E311A/R312A, decreased the MgATPase rate but did not change the apparent Ca(2+) affinity. These results suggest that charged residues on the surface of the actin inner domain are important in Ca(2+)- and myosin-induced thin filament activation.

Correlation between polymerizability and conformation in scallop beta-like actin and rabbit skeletal muscle alpha-actin

In order to investigate the structural basis for functional differences among actin isoforms, we have compared the polymerization properties and conformations of scallop adductor muscle beta-like actin and rabbit skeletal muscle alpha-actin. Polymerization of scallop Ca(2+)-actin was slower than that of skeletal muscle Ca(2+)-actin. Cleavage of the actin polypeptide chain between Gly-42 and Val-43 with Escherichia coli protease ECP 32 impaired the polymerization of scallop Mg(2+)-actin to a greater extent than skeletal muscle Mg(2+)-actin. When monomeric scallop and skeletal muscle Ca(2+)-actins were subjected to limited proteolysis with trypsin, subtilisin, or ECP 32, no differences in the conformation of actin subdomain 2 were detected. At the same time, local differences in the conformations of scallop and skeletal muscle actin subdomains 1 were revealed as intrinsic fluorescence differences. Replacement of tightly bound Ca(2+) with Mg(2+) resulted in more extensive proteolysis of segment 61-69 of scallop actin than in the case of skeletal muscle actin. Furthermore, segment 61-69 was more accessible to proteolysis with subtilisin in polymerized scallop Ca(2+)-actin than in polymerized skeletal muscle Ca(2+)-actin, indicating that, in the polymeric form, the nucleotide-containing cleft is in a more open conformation in beta-like scallop actin than in skeletal muscle alpha-actin. We suggest that this difference between scallop and skeletal muscle actins is due to a less efficient shift of scallop actin subdomain 2 to the position it has in the polymer. The possible consequences of amino acid substitutions in actin subdomain 1 in the allosteric regulation of the actin cleft, and hence in the different stabilities of polymers formed by different actins, are discussed.

Modulation of yeast F-actin structure by a mutation in the nucleotide-binding cleft

Although the actin sequence is very highly conserved across evolution, tissue-specific expression of different isoforms in high eukaryotes suggests that different isoforms carry out different functions. However, little information exists about either the differences in filaments made from different actins or the effects on filament structure caused by the various mutations in actin that have been introduced to gain insight into actin function. Using electron microscopy and three-dimensional reconstruction, we have studied the differences in the filaments made by yeast and rabbit skeletal muscle actin, two proteins with 88% homologous sequences, and we have assessed the changes in filament structure caused by the introduction of the S14A mutation into yeast actin. Elimination of the S14 hydroxyl group, assumed to bind to the gamma-phosphate of actin-bound ATP, results in a 40 to 60-fold decrease in actin's affinity for ATP. We show that yeast actin displays less extensive contacts between the two long-pitch helical strands than does muscle actin, and displays the large cooperativity within filaments previously observed for muscle actin. Finally, we demonstrate that the S14A mutation narrows the cleft between the two lobes of the actin subunit and strengthens the inter-strand connections in F-actin.