Preferential solvation changes upon lysozyme heat denaturation in mixed solvents

Formulation Considerations for Autologous T Cell Drug Products

Genetically modified autologous T cells have become an established immunotherapy in the fight against cancer. The manufacture of chimeric antigen receptor (CAR) and αβ-T cell receptor (TCR) transduced T cells poses unique challenges, including the formulation, cryopreservation and fill-finish steps, which are the focus of this review. With an increasing number of marketing approvals for CAR-T cell therapies, comparison of their formulation design and presentation for administration can be made. These differences will be discussed alongside the emergence of automated formulation and fill-finish processes, the formulation design space, Monte Carlo simulation applied to risk analysis, primary container selection, freezing profiles and thaw and the use of dimethyl sulfoxide and alternative solvents/excipients as cryopreservation agents. The review will conclude with a discussion of the pharmaceutical solutions required to meet the simplification of manufacture and flexibility in dosage form for clinical treatment.

Preferential Ion Microsolvation in Mixed-Modifier Environments Observed Using Differential Mobility Spectrometry

The preferential solvation behavior for eight different derivatives of protonated quinoline was measured in a tandem differential mobility spectrometer mass spectrometer (DMS-MS). Ion-solvent cluster formation was induced in the DMS by the addition of chemical modifiers (i.e., solvent vapors) to the N₂ buffer gas. To determine the effect of more than one modifier in the DMS environment, we performed DMS experiments with varying mixtures of water, acetonitrile, and isopropyl alcohol solvent vapors. The results show that doping the buffer gas with a binary mixture of modifiers leads to the ions binding preferentially to one modifier over another. We used density functional theory to calculate the ion-solvent binding energies, and in all cases, calculations show that the quinolinium ions bind most strongly with acetonitrile, then isopropyl alcohol, and most weakly with water. Computational results support the hypothesis that the quinolinium ions bind exclusively to whichever solvent they have the strongest interaction with, regardless of the presence of other modifier gases.

The Effect of Dimethyl Sulfoxide on the Lysozyme Unfolding Kinetics, Thermodynamics, and Mechanism

The thermal stability of proteins in the presence of organic solvents and the search for ways to increase this stability are important topics in industrial biocatalysis and protein engineering. The denaturation of hen egg-white lysozyme in mixtures of water with dimethyl sulfoxide (DMSO) with a broad range of compositions was studied using a combination of differential scanning calorimetry (DSC), circular dichroism (CD), and spectrofluorimetry techniques. In this study, for the first time, the kinetics of unfolding of lysozyme in DMSO–water mixtures was characterized. In the presence of DMSO, a sharp decrease in near-UV CD and an increase in the fluorescence signal were observed at lower temperatures than the DSC denaturation peak. It was found that differences in the temperatures of the CD and DSC signal changes increase as the content of DMSO increases. Changes in CD and fluorescence are triggered by a break of the tertiary contacts, leading to an intermediate state, while the DSC peak corresponds to a subsequent complete loss of the native structure. In this way, the commonly used two-state model was proven to be unsuitable to describe the unfolding of lysozyme in the presence of DMSO. In kinetic studies, it was found that even high concentrations of DMSO do not drastically change the activation energy of the initial stage of unfolding associated with a disruption of the tertiary structure, while the enthalpy of denaturation shows a significant dependence on DMSO content. This observation suggests that the structure of the transition state upon unfolding remains similar to the structure of the native state.

Highly effective enhancement of waste activated sludge dewaterability by altering proteins properties using methanol solution coupled with inorganic coagulants

Proteins are the dominant organic component of extracellular polymeric substances (EPS) in waste activated sludge (WAS), and play an important role during sludge dewatering processes. Methanol is a polar hydrophilic reagent and can denature proteins, which suggested to us that the modification of protein configurations with methanol could improve sludge dewatering performance. In this study, methanol was used to precondition WAS prior to adding inorganic coagulants for dewatering enhancement. The morphology and EPS properties (especially of proteins) were investigated to analyze and explain the effects of methanol in the sludge conditioning process. The results show that methanol performed much better than traditional inorganic coagulants in improving sludge dewaterability in term of specific resistance to filtration (SRF) and cake solid content (CSC). Extractable proteins in EPS increased to a maximum when the concentration of methanol reached 40% (w/w) because cell membranes were destroyed and intracellular substances and water were released. Floc protein content was reduced with the further increase in methanol concentration due to protein precipitation. Confocal laser scanning microscopy analysis indicated that proteins precipitated and formed larger aggregates because methanol destroyed both the hydration shell and the hydrophobic clusters of proteins and expanded the protein tertiary structure to release interstitial water and bound water. The combination treatment of methanol and inorganic coagulants (PAC or FeCl₃) showed significant synergetic effects on enhancing sludge dewatering and cake drying. In practical applications, methanol from the dewatering sludge can be returned to the biochemical pool and used as the carbon source for nitrogen removal in the denitrification process. This integrated process is appropriate for sludge final disposal technologies that have high energy demands, such as incineration and pyrolysis. This paper describes a novel approach to improving sludge dewaterability through the alteration of protein properties by use of physiochemical techniques.

Molecular dynamics study of unfolding of lysozyme in water and its mixtures with dimethyl sulfoxide

All-atom explicit solvent molecular dynamics was used to study the process of unfolding of hen egg white lysozyme in water and mixtures of water with dimethyl sulfoxide at different compositions. We have determined the kinetic parameters of unfolding at a constant temperature 450K. For each run, the time of disruption of the tertiary structure of lysozyme t_u was defined as the moment when a certain structural criterion computed from the trajectory reaches its critical value. A good agreement is observed between the results obtained using several different criteria. The secondary structure according to DSSP calculations is found to be partially unfolded to the moment of disruption of tertiary structure, but some of its elements keep for a long time after that. The values of t_u averaged over ten 30ns-long trajectories for each solvent composition are shown to decrease very rapidly with addition of dimethyl sulfoxide, and rather small amounts of dimethyl sulfoxide are found to change the pathway of unfolding. In pure water, despite the loss of tertiary contacts and disruption of secondary structure elements, the protein preserves its compact globular state at least over 130ns of simulation, while even at 5mol percents of dimethyl sulfoxide it loses its compactness within 30ns. The proposed methodology is a generally applicable tool to quantify the rate of protein unfolding in simulation studies.

Protein-excipient interactions: mechanisms and biophysical characterization applied to protein formulation development

The purpose of this review is to demonstrate the critical importance of understanding protein-excipient interactions as a key step in the rational design of formulations to stabilize and deliver protein-based therapeutic drugs and vaccines. Biophysical methods used to examine various molecular interactions between solutes and protein molecules are discussed with an emphasis on applications to pharmaceutical excipients in terms of their effects on protein stability. Key mechanisms of protein-excipient interactions such as electrostatic and cation-pi interactions, preferential hydration, dispersive forces, and hydrogen bonding are presented in the context of different physical states of the formulation such as frozen liquids, solutions, gels, freeze-dried solids and interfacial phenomenon. An overview of the different classes of pharmaceutical excipients used to formulate and stabilize protein therapeutic drugs is also presented along with the rationale for use in different dosage forms including practical pharmaceutical considerations. The utility of high throughput analytical methodologies to examine protein-excipient interactions is presented in terms of expanding formulation design space and accelerating experimental timelines.

Preparation and characterization of cross-linked laccase aggregates and their application to the elimination of endocrine disrupting chemicals

Laccase from the white rot fungus Coriolopsis polyzona was immobilized for the first time through the formation of cross-linked enzyme aggregates (CLEAs). Laccase CLEAs were produced by using 1000g of polyethylene glycol per liter of enzyme solution as precipitant and 200muM of glutaraldehyde as a cross-linking agent. These CLEAs had a laccase activity of 148Ug(-1) and an activity recovery of 60.2% when using 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as substrate. CLEAs formed by co-aggregation with bovine serum albumin (BSA) as a stabilizer showed lower laccase activity and affinity for ABTS than those without BSA. The CLEAs co-aggregated with BSA showed higher residual activity against a protease, NaN(3), EDTA, methanol and acetone. The thermoresistance was higher for CLEAs than for free laccase and also higher for CLEAs co-aggregated with BSA than for simple CLEAs when tested at a pH of 3 and a temperature of 40 degrees C. Finally, laccase CLEAs were tested for their capacity to eliminate the known or suspected endocrine disrupting chemicals (EDCs) nonylphenol, bisphenol A and triclosan in a fluidized bed reactor. A 100-ml reactor with 0.5mg of laccase CLEAs operated continuously at a hydraulic retention time of 150min at room temperature and pH 5 could remove all three EDCs from a 5mgl(-1) solution.

Thermal Stability of Humicola insolens Cutinase in aqueous SDS

Cutinase from Humicola insolens (HiC) has previously been shown to bind anomalously low amounts of the anionic surfactant sodium dodecylsulfate (SDS). In the current work, we have applied scanning and titration calorimetry to investigate possible relationships between this weak interaction and the effect of SDS on the equilibrium and kinetic stability of HiC. The results are presented in a "state-diagram," which specifies the stable form of the protein as a function of temperature and SDS concentration. In comparison with other proteins, the equilibrium stability HiC is strongly decreased by SDS. For low SDS concentrations (SDS:HiC molar ratio, MR < 8) this trait is also found for the kinetically controlled thermal aggregation of the protein. At higher MR, however, SDS stabilizes noticeably against irreversible aggregation. We suggest that this relies on electrostatic repulsion of the increasingly negatively charged HiC-SDS complexes. The combined interpretation of calorimetric and binding data allowed the calculation of the changes in enthalpy and heat capacity for the association of HiC and SDS near the saturation point. The latter function was about -410 J mol(-1) K(-1) or similar to the heat capacity change for micelle formation (-470 J mol(-1) K(-1)). This suggests that SDS is hydrated to a similar extent in the micellar and protein associated forms. The results are discussed in terms of the Wyman theory for linked equilibria. Quantitative analysis along these lines suggests that the reversible thermal unfolding of the protein couples to the binding of 2-3 additional SDS molecules. This corresponds to a 15-20% increase in the binding number. Wyman theory also rationalizes relationships between low affinity and high susceptibility observed in this study.

Enhancement of thermal stability and inhibition of protein aggregation by osmolytic effect of hydroxyproline

A combination of spectroscopic, calorimetric, and microscopic studies to understand the effect of hydroxyproline on the thermal stability, conformation, biological activity, and aggregation of proteins has been investigated. Significantly increased protein stability and suppression of aggregation is achieved in the presence of hydroxyproline. For example, exceptional increase in the thermal stability of lysozyme up to 26.4 degrees C and myoglobin up to 31.8 degrees C is obtained in the presence of hydroxyproline. The increased thermal stability of the proteins is observed to be accompanied with significant rise of the catalytic activity. Hydroxyproline is observed to prevent lysozyme fibril formation in vitro. Fluorescence and circular dichroism studies indicate induction of tertiary structures of the studied proteins in the presence of hydroxyproline. Preferential hydration of the native state is found to be crucial for the mechanism of protein stabilization by hydroxyproline. We compared the effect of hydroxyproline to that of proline and observed similar increase in the activity and suppression of protein aggregation. The results demonstrate the use of hydroxyproline as a protein stabilizer and in the prevention of protein aggregation and fibril formation.

Protein phase diagrams II: nonideal behavior of biochemical reactions in the presence of osmolytes

In the age of biochemical systems biology, proteomics, and high throughput methods, the thermodynamic quantification of cytoplasmatic reaction networks comes into reach of the current generation of scientists. What is needed to efficiently extract the relevant information from the raw data is a robust tool for evaluating the number and stoichiometry of all observed reactions while providing a good estimate of the thermodynamic parameters that determine the molecular behavior. The recently developed phase-diagram method, strictly speaking a graphical representation of linkage or Maxwell Relations, offers such capabilities. Here, we extend the phase diagram method to nonideal conditions. For the sake of simplicity, we choose as an example a reaction system involving the protein RNase A, its inhibitor CMP, the osmolyte urea, and water. We investigate this system as a function of the concentrations of inhibitor and osmolyte at different temperatures ranging from 280 K to 340 K. The most interesting finding is that the protein-inhibitor binding equilibrium depends strongly on the urea concentration--by orders-of-magnitude more than expected from urea-protein interaction alone. Moreover, the m-value of ligand binding is strongly concentration-dependent, which is highly unusual. It is concluded that the interaction between small molecules like urea and CMP can significantly contribute to cytoplasmic nonideality. Such a finding is highly significant because of its impact on renal tissue where high concentrations of cosolutes occur regularly.

DMSO-Related Effects in Protein Characterization

DMSO is the standard solvent for preparing stock solutions of compounds for drug discovery. The assay concentration of DMSO is normally 0.1% to 5% (v/v) or 14 to 715 mM. Thus, DMSO is often one of the principal additives in assay buffers. This standardization of stock solutions does not eliminate possible pitfalls associated with the effects of the DMSO-containing solutions on individual proteins. In this article, the authors want to emphasize the importance of detailed studies of these effects in the early stages of drug discovery. Two protein systems, the extracellular soluble domain of the human growth hormone receptor (hGHbp) and the phosphatase domain of PFKFB1 (BPase), were used for the study on effects of DMSO on protein stability, protein aggregation, and binding of drug compounds. The study revealed significant differences in the proteins’ behavior in the presence and absence of low amounts of DMSO. The addition of DMSO resulted in destabilization of the proteins investigated and also changed the apparent binding property of 1 protein. The authors have also shown that low DMSO concentrations influence the ionization process in electrospray ionization mass spectrometry (ESI-MS).

Thermodynamics of α-lactalbumin–dl-α-dipalmitoylphosphatidylcholine interactions and effect of the antioxidant nicotinamide on these interactions

Differential scanning calorimetry has been used to understand the thermodynamics of the interactions of dl-alpha-dipalmitoylphosphatidylcholine (DPPC) with alpha-lactalbumin and the effect of the antioxidant nicotinamide on these interactions. Nicotinamide decreases the thermal transition temperature of both the lipid and the protein at high concentrations. The thermal unfolding transitions of the protein were two state and calorimetrically reversible. There was no significant change in the shape and thermodynamic parameters accompanying the lipid endotherms, suggesting that nicotinamide did not penetrate the lipid bilayer. The thermal unfoldings of alpha-lactalbumin in the presence of DPPC as cosolute also adhered to two-state reversible mechanism. The changes in the thermodynamic parameters accompanying the thermal transitions were small, indicating no significant interaction of alpha-lactalbumin with DPPC. The changes in the thermodynamic parameters indicate that the lipid bilayer organization, as well as the partitioning of the extrinsic protein alpha-lactalbumin into the bilayer, is not affected in the entire studied concentration range of the lipid. It is observed that the presence of increasing concentration of nicotinamide (as high as 1.0 mol dm(-3)) in the lipid-protein mixture does not affect its partitioning into the lipid bilayer, although nicotinamide preferentially interacts with alpha-lactalbumin. The change in the effect of nicotinamide on lipid transition temperature in the mixture and literature report suggests that nicotinamide may be forming a hydrogen-bonded complex with the protein through its amide functionality. The surface tension data of aqueous nicotinamide in combination with the thermal denaturation results of protein in presence of nicotinamide confirmed that surface tension effect does not have any significant contribution to the effect of nicotinamide on protein.

Dimethyl sulfoxide at 2.5% (v/v) alters the structural cooperativity and unfolding mechanism of dimeric bacterial NAD+ synthetase

Dimethyl sulfoxide (DMSO) is commonly used as a cosolvent to improve the aqueous solubility of small organic compounds. Its use in a screen to identify novel inhibitors of the enzyme NAD(+) synthetase led to this investigation of its potential effects on the structure and stability of this 60-kD homodimeric enzyme. Although no effects are observed on the enzyme's catalytic activity, as low as 2.5% (v/v) DMSO led to demonstrable changes in the stability of the dimer and its unfolding mechanism. In the absence of DMSO, the dimer behaves hydrodynamically as a single ideal species, as determined by equilibrium analytical ultracentrifugation, and thermally unfolds according to a two-state dissociative mechanism, based on analysis by differential scanning calorimetry (DSC). In the presence of 2.5% (v/v) DMSO, an equilibrium between the dimer and monomer is now detectable with a measured dimer association constant, K(a), equal to 5.6 x 10(6)/M. DSC curve analysis is consistent with this finding. The data are best fit to a three-state sequential unfolding mechanism, most likely representing folded dimer <==> folded monomer <==> unfolded monomer. The unusually large change in the relative stabilities of dimer and monomer, e.g., the association equilibrium shifts from an infinitely large K(a) down to approximately 10(6)/M, in the presence of relatively low cosolvent concentration is surprising in view of the significant buried surface area at the dimer interface, roughly 20% of the surface area of each monomer is buried. A hypothetical structural mechanism to explain this effect is presented.

Interaction of 2,2,2-trifluoroethanol with proteins: calorimetric, densimetric and surface tension approach

The thermal denaturation of hen egg-white lysozyme was studied in the presence of 2,2,2-trifluoroethanol (TFE) at various pH values using micro differential scanning calorimetry. Quantitative thermodynamic parameters accompanying the thermal transitions were evaluated. It is observed that thermal unfolding of lysozyme in the presence of TFE upto a concentration of 4.0 mol dm(-3) follows a two-state denaturation mechanism as indicated by the equality of van't Hoff and calorimetric enthalpies. The finer details of interaction were studied by measuring the partial molar volume of some constituent amino acids and glycine peptides from water to aqueous TFE at 298.15 K. The physico-chemical properties of aqueous TFE: apparent molar heat capacities, apparent molar volumes and surface tension were measured to understand the intrinsic properties of the cosolvent as well. From the correlation among the thermal unfolding data on lysozyme in aqueous TFE, calculated preferential interaction parameters, physico chemical properties of aqueous TFE and partial molar volumes of transfer, it is concluded that both solvent mediated effect and direct interaction constitute the mechanism of TFE-protein interactions.

4-Chlorobutanol induces unusual reversible and irreversible thermal unfolding of ribonuclease A: thermodynamic, kinetic, and conformational characterization

The thermal denaturation of ribonuclease A has been studied by differential scanning calorimetry in the presence of 4-chlorobutan-1-ol. The thermal transitions were observed to be reversible at pH 5.5 in the presence of low concentration (up to 50 mM) of the alcohol, irreversible in the intermediate (50 mM < c < mM) and again reversible in the presence of 250 mM and higher concentrations of 4-chlorobutan-1-ol. In the presence of 50 mM 4-chlorobutan-1-ol, ribonuclease A is present in two conformational states unfolding at different temperatures. The reversible thermal transitions have been fitted to a two-state native-to-denatured mechanism. Irreversible thermal transitions have been analyzed according to two-state irreversible native-to-denatured kinetic model. Using the irreversible model, rate constant as a function of temperature and energy of activation of the irreversible process have been calculated. Circular dichroism and fluorescence spectroscopic results corroborate the DSC observations and indicate a protein conformation with poorly defined tertiary structure and high content of secondary structure in the presence of 50 mM 4-chlorobutan-1-ol at a temperature corresponding to the second transition. Similar results have been observed at pH 3.9.

1,1,1,3,3,3-hexafluoroisopropanol induced thermal unfolding and molten globule state of bovine α-lactalbumin: Calorimetric and spectroscopic studies

The thermal denaturation of alpha-lactalbumin was studied at pH 7.0 and 9.0 in aqueous 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) by high-sensitivity differential scanning calorimetry. The conformation of the protein was analyzed by a combination of fluorescence and circular dichroism measurements. The most obvious effect of HFIP was lowering of the transition temperature with an increase in the concentration of the alcohol up to 0.30M, beyond which no calorimetric transition was observed. Up to 0.30M HFIP the calorimetric and van't Hoff enthalpy remained the same, indicating the validity of the two-state approximation for the thermal unfolding of alpha-lactalbumin. The quantitative thermodynamic parameters accompanying the thermal transitions have been evaluated. Spectroscopic observations confirm that alpha-lactalbumin is in the molten globule state in the presence of 0.50M HFIP at pH 7.0 and 0.75M HFIP at pH 9.0. The results also demonstrate that alpha-lactalbumin in the molten globule state undergoes a noncooperative thermal transition to the denatured state. It is observed that two of four tryptophans are exposed to the solvent in the HFIP induced molten globule state of alpha-lactalbumin compared to four in the 8.5M urea induced denatured state of the protein. It is also observed that the HFIP induced molten globule states at the two pH values are different from the acid induced molten globule state (A state) of alpha-lactalbumin.

On the stabilizing action of protein denaturants: acetonitrile effect on stability of lysozyme in aqueous solutions

Stability of hen lysozyme in the presence of acetonitrile (MeCN) at different pH values of the medium was studied by scanning microcalorimetry with a special emphasis on determination of reliable values of the denaturational heat capacity change. It was found that the temperature of denaturation decreases on addition of MeCN. However, the free energy extrapolation showed that below room temperature the thermodynamic stability increases at low concentrations of MeCN in spite of the general destabilizing effect at higher concentrations and temperatures. Charge-induced contribution to this stabilization was shown to be negligible (no pH-dependence was found); therefore, the most probable cause for the phenomenon is an increase of hydrophobic interactions at low temperatures in aqueous solutions containing small amounts of the organic additive. The difference in preferential solvation of native and denatured states of lysozyme was calculated from the stabilization free energy data. It was found that the change in preferential solvation strongly depends on the temperature in the water-rich region. At the higher MeCN content this dependence decreases until, at 0.06 mole fractions of MeCN, the difference in the preferential solvation between native and denatured lysozyme becomes independent of the temperature over a range of 60 K. The importance of taking into account non-ideality of a mixed solution, when analyzing preferential solvation phenomena was emphasized.

Thermodynamic stability of ribonuclease A in alkylurea solutions and preferential solvation changes accompanying its thermal denaturation: a calorimetric and spectroscopic study

The effect of methylurea, N,N'-dimethylurea, ethylurea, and butylurea as well as guanidine hydrochloride (GuHCl), urea and pH on the thermal stability, structural properties, and preferential solvation changes accompanying the thermal unfolding of ribonuclease A (RNase A) has been investigated by differential scanning calorimetry (DSC), UV, and circular dichroism (CD) spectroscopy. The results show that the thermal stability of RNase A decreases with increasing concentration of denaturants and the size of the hydrophobic group substituted on the urea molecule. From CD measurements in the near- and far-UV range, it has been observed that the tertiary structure of RNase A melts at about 3 degrees C lower temperature than its secondary structure, which means that the hierarchy in structural building blocks exists for RNase A even at conditions at which according to DSC and UV measurements the RNase A unfolding can be interpreted in terms of a two-state approximation. The far-UV CD spectra also show that the final denatured states of RNase A at high temperatures in the presence of different denaturants including 4.5 M GuHCl are similar to each other but different from the one obtained in 4.5 M GuHCl at 25 degrees C. The concentration dependence of the preferential solvation change delta r23, expressed as the number of cosolvent molecules entering or leaving the solvation shell of the protein upon denaturation and calculated from DSC data, shows the same relative denaturation efficiency of alkylureas as other methods.

Solvent isotope effect on thermodynamics of hydration

Partial molar heat capacities of five linear alcohols (methanol, ethanol, n-propanol, n-butanol, n-pentanol) and five N-substituted amides (n-propionamide, N-methylformamide, N-methylacetamide, N-methylpropionamide, N-ethylacetamide) in aqueous D(2)O solution have been measured at 25 degrees C. The heat capacities of transfer of these compounds from H(2)O to D(2)O were calculated using previously reported (Makhatadze et al., Biophys. Chem. 64 (1997) 93) values of partial heat capacities of alcohols and amides in aqueous H(2)O solutions. It is shown that the sign and magnitude of the heat capacity change upon transfer from H(2)O to D(2)O depends on the relative amount of polar and non-polar solvent accessible surface areas of solute. Analysis shows that transfer of non-polar surface from H(2)O to D(2)O is accompanied by a positive heat capacity change. In contrast, transfer of polar surface from H(2)O to D(2)O occurs with negative heat capacity change. Estimates show that the solvent isotope effect on the heat capacity changes upon protein unfolding can be predicted using the changes of the polar and non-polar surface area changes upon protein unfolding and the transfer data of model compounds. Analysis of the thermodynamic functions of transfer of non-polar compounds from H(2)O to D(2)O shows puzzling behavior which contradicts current definitions of the hydrophobic effect.