Step-scan time-resolved FTIR spectroscopy of cytochrome P-450cam carbon monoxide complex: a salt link involved in the ligand-rebinding process

Versatile Trityl Spin Labels for Nanometer Distance Measurements on Biomolecules In Vitro and within Cells

Structure determination of biomacromolecules under in-cell conditions is a relevant yet challenging task. Electron paramagnetic resonance (EPR) distance measurements in combination with site-directed spin labeling (SDSL) are a valuable tool in this endeavor but the usually used nitroxide spin labels are not well-suited for in-cell measurements. In contrast, triarylmethyl (trityl) radicals are highly persistent, exhibit a long relaxation time and a narrow spectral width. Here, the synthesis of a versatile collection of trityl spin labels and their application in in vitro and in-cell trityl-iron distance measurements on a cytochrome P450 protein are described. The trityl labels show similar labeling efficiencies and better signal-to-noise ratios (SNR) as compared to the popular methanethiosulfonate spin label (MTSSL) and enabled a successful in-cell measurement.

Dynamics and flexibility of human aromatase probed by FTIR and time resolved fluorescence spectroscopy

Human aromatase (CYP19A1) is a steroidogenic cytochrome P450 converting androgens into estrogens. No ligand-free crystal structure of the enzyme is available to date. The crystal structure in complex with the substrate androstenedione and the steroidal inhibitor exemestane shows a very compact conformation of the enzyme, leaving unanswered questions on the conformational changes that must occur to allow access of the ligand to the active site. As H/D exchange kinetics followed by FTIR spectroscopy can provide information on the conformational changes in proteins where solvent accessibility is affected, here the amide I region was used to measure the exchange rates of the different elements of the secondary structure for aromatase in the ligand-free form and in the presence of the substrate androstenedione and the inhibitor anastrozole. Biphasic exponential functions were found to fit the H/D exchange data collected as a function of time. Two exchange rates were assigned to two populations of protons present in different flexible regions of the protein. The addition of the substrate androstenedione and the inhibitor anastrozole lowers the H/D exchange rates of the α-helices of the enzyme when compared to the ligand-free form. Furthermore, the presence of the inhibitor anastrozole lowers exchange rate constant (k₁) for β-sheets from 0.22±0.06 min⁻¹ for the inhibitor-bound enzyme to 0.12±0.02 min⁻¹ for the free protein. Dynamics effects localised in helix F were studied by time resolved fluorescence. The data demonstrate that the fluorescence lifetime component associated to Trp224 emission undergoes a shift toward longer lifetimes (from ≈5.0 to ≈5.5 ns) when the substrate or the inhibitor are present, suggesting slower dynamics in the presence of ligands. Together the results are consistent with different degrees of flexibility of the access channel and therefore different conformations adopted by the enzyme in the free, substrate- and inhibitor-bound forms.

The role of the heme propionates in heme biochemistry

There are numerous studies, relying on both experimental and theoretical observations, illustrating the active role of the heme propionates in regulating electron delivery to the iron center as well as biochemical properties of the heme. Evidences for this come from a wide variety of heme containing systems: cytochromes, heme peroxidases, globins, etc. Here, we shortly summarize these studies and revisit previous theoretical calculations (V. Guallar, M.H. Baik, S.J. Lippard, R.A. Friesner, Proc. Natl. Acad. Sci. USA 100 (2003) 6998-7002) where the propionate groups induced the delocalization of the spin density in the cytochrome P450cam putative active species, Compound I. We introduce novel data, obtained by means of mixed quantum mechanics and molecular mechanics methods, indicating a larger electron delocalization into the protein. We also present novel results based on the recent migration of spin density observed by Barrows et al. (T.P. Barrows, T.L. Poulos, Biochemistry 44 (2005) 14062-68) on an ascorbate peroxidase mutant. All this data strongly supports the importance of the propionate groups in tuning the heme electronic properties.

Identification of variable amino acids in the SRS1 region of CYP6B1 modulating furanocoumarin metabolism

The homology model of Papilio polyxenes CYP6B1 places Ile115, one of two variable amino acids, in the SRS1 of various CYP6B subfamily proteins in close proximity to the heme and Ala113, another variable amino acid, in a more distal position. We have constructed mutant CYP6B1 proteins altered at either of these positions and homology models of each based on multiple alignments with crystallized P450 proteins. The homology models suggest the existence of significant structural diversity in the hydrogen bond network surrounding the heme as a result of single point mutations in SRS1. Mutagenesis of Ile115 or Ala113 to other residues present in the insect CYP6B subfamily indicates that these amino acids control the spin state of the heme and, as a result, the catalytic activity of this monooxygenase. In particular, the I115L mutation significantly increases the spin state of the heme coordinately with 2- to 4-fold increases in its turnover of linear furanocoumarins. Other A113V, A113L, A113Q, and A113E mutations display more variation in their effects but, in each case, strong correlations exist between furanocoumarin turnover and heme spin state. These data demonstrate that variable amino acids in SRS1 of the insect CYP6B subfamily exert dramatic effects on the range of furanocoumarins metabolized, even when they occur in positions potentially distal from the substrate. These effects are possibly mediated through rearrangement of the local hydrogen bond network.

Specific and non-specific effects of potassium cations on substrate-protein interactions in cytochromes P450cam and P450lin

Substrate binding to cytochrome P450cam is generally considered to be a two-step process. The first step corresponds to the entrance of the substrate, camphor, into the heme pocket. The second step corresponds to a spin transition (low spin-->high spin) of the iron in the protein-substrate complex. This spin transition is related to the mobility of the substrate inside the active site [Biochim Biophys Acta 1338 (1997) 77]. Potassium cations (K(+)) have a specific effect on the spin equilibrium. This is generally attributed to the K(+) ion-induced conformational change of tyrosine 96, the hydroxyl group of which is hydrogen bonded to the keto group of camphor and results in optimum substrate orientation and reduced mobility of this substrate in the active site. In the present paper, we show that K(+) not only affects the substrate-Tyr 96 couple, but acts more globally since K(+) effects are also observed in the Tyr96Phe mutant as well as in complexes with camphor-analogues. Large compounds, that fit well in the heme pocket and bind with higher affinity than camphor, display high spin contents that are less dependent on the presence of K(+). In contrast, K(+) has a significant effect on the high spin content of substrate-cytochrome P450cam complexes with looser interactions. We conclude that large compounds with higher affinities than camphor have more van der Waals contacts with the active site residues. Their mobilities are then reduced and less dependent on the presence of K(+). In this study, we also explored, for comparison, the K(+) effect on the spin transition state of another member of the P450 superfamily, cytochrome P450lin. This effect is not as strong as those observed for cytochrome P450cam. Even though the spin equilibrium does not change dramatically in the presence of K(+) or Na(+), the value of the dissociation constant (K(d)) for linalool binding is significantly affected by ionic strength. Analysis of the thermodynamic parameters for the linalool binding strongly suggests that, similarly to our previous finding for cytochrome P450cam, electrostatic gates participate in the control of substrate access.

Intermolecular electron transfer in cytochrome P450cam covalently bound with Tris(2,2'-bipyridyl)ruthenium(II): structural changes detected by FTIR spectroscopy

Using Fourier transform infrared spectroscopy (FTIR) we have monitored the changes in the protein structure following photoinduced electron transfer from Ru(bpy)(3)(2+) covalently attached to cysteine 334 on the surface of cytochrome P450cam (CYP101). The FTIR difference spectra between the oxidized and reduced form indicate changes in a salt link and the secondary structure (alpha-helix and turn regions). Photoreduction was carried out in the presence of carbon monoxide in order to prove the reduction of the heme iron by means of the appearance of the characteristic CO stretch vibration infrared band at 1940 cm(-1) for the camphor-bound protein. This infrared band has also been used to estimate electron transfer rates. The observed rates depend on the protein concentration, indicating that intermolecular electron transfer occurs between the labeled molecules.

Substrates modulate the rate-determining step for CO binding in cytochrome P450cam (CYP101). A high-pressure stopped-flow study

The high-pressure stopped-flow technique is applied to study the CO binding in cytochrome P450cam (P450cam) bound with homologous substrates (1R-camphor, camphane, norcamphor and norbornane) and in the substrate-free protein. The activation volume DeltaV # of the CO on-rate is positive for P450cam bound with substrates that do not contain methyl groups. The kon rate constant for these substrate complexes is in the order of 3 x 10(6) M(-1) x s(-1). In contrast, P450cam complexed with substrates carrying methyl groups show a negative activation volume and a low kon rate constant of approximately 3 x 10(4) M(-1) x s(-1). By relating kon and DeltaV # with values for the compressibility and the influx rate of water for the heme pocket of the substrate complexes it is concluded that the positive activation volume is indicative for a loosely bound substrate that guarantees a high solvent accessibility for the heme pocket and a very compressible active site. In addition, subconformers have been found for the substrate-free and camphane-bound protein which show different CO binding kinetics.

Cytochrome P-450-CO and substrates: lessons from ligand binding under high pressure

An overview of the application of high-pressure studies on the carbon monoxide complex of cytochrome P-450 is given. Different approaches to characterize ligand binding steps, the conformational states and substates and the compressibility of the ligand-bound complex are reviewed. A particular focus is the effect of substrates on these properties. It is shown that substrate mobility, compressibility and water accessibility are interrelated and may have functional meaning.

Purification and characterization of benzoate-para-hydroxylase, a cytochrome P450 (CYP53A1), from Aspergillus niger

Benzoate-para-hydroxylase (CYP51A or BpH) and NADPH:cytochrome P450 reductase from the filamentous fungus Aspergillus niger were purified to apparent homogeneity, using an overproducing A. niger strain. This is the first membrane-bound fungal cytochrome P450 to be isolated and characterized. Combining BpH with NADPH:cytochrome P450 oxidoreductase in the presence of the phospholipid dilauryl phosphatidylcholine restored the BpH activity, although to only a minor extent. Spectral analysis of BpH showed characteristic spectra for a cytochrome P450. Substrate binding studies with purified BpH as a function of temperature and as a function of pH were performed. Temperature-dependent studies, at pH 8.0, showed that the simplified spin equilibrium model originally proposed for camphor binding to cytochrome P450cam (M. T. Fisher and S. G. Sligar, 1987, Biochemistry 26, 4797-4803) also applies to the benzoate-BpH system. Two equilibrium constants were determined, K(1) for substrate binding without a spin change and K(2) for the spin change of the benzoate-BpH complex. pH-dependent binding studies showed that both K(1) and K(2) increase with pH, indicative of a higher affinity. As K(1) decreases more strongly with pH than K(2), we suggest that benzoate first binds to a binding site on the outside of the protein in a pH-dependent way, followed by transfer to the inside of the protein causing a spin change at the heme iron. The strong pH dependence of K(1) could be the result of the need to break salt bridges at the binding site on the outside of the protein. pH-dependent kinetic studies with microsomes showed that the apparent K(M) values followed the trend observed for benzoate binding to purified BpH, while k(cat) values were virtually constant between pH 6.6 and 8.0 and decreased above pH 8, probably due to loss of productive interaction between BpH and NADPH:cytochrome P450 oxidoreductase. Research into the substrate specificity of BpH showed that BpH can only use benzoic acid and some of its derivatives. Monosubstitution on the phenyl ring is allowed but only at certain positions with specific, not too large groups. Substitution always leads to a lower affinity of the substrate. With one exception, all substrates were converted to their 4-hydroxy derivative. The exception, 3-methoxybenzoate, was demethylated to yield 3-hydroxybenzoate only. The restricted number of substrates and the specificity in catalysis suggest that BpH is not a general-purpose hydroxylase but that its role is confined to benzoate hydroxylation in the beta-ketoadipate pathway of A. niger.

Insight into protein structure and protein-ligand recognition by Fourier transform infrared spectroscopy

An overview of the application of Fourier transform infrared spectroscopy for the analysis of the structure of proteins and protein-ligand recognition is given. The principle of the technique and of the spectra analysis is demonstrated. Spectral signal assignments to vibrational modes of the peptide chromophore, amino acid side chains, cofactors and metal ligands are summarized. Several examples for protein-ligand recognition are discussed. A particular focus is heme proteins and, as an example, studies of cytochrome P450 are reviewed. Fourier transform infrared spectroscopy in combination with the various techniques such as time-resolved and low-temperature methods, site-directed mutagenesis and isotope labeling is a helpful approach to studying protein-ligand recognition.

Substrate binding to 15beta-hydroxylase (CYP106A2) probed by FT infrared spectroscopic studies of the iron ligand CO stretch vibration

CYP106A2 has been expressed in E. coli with a high yield of up to 130 mg per litre of culture, purified to electrophoretic homogenity and found to be active in 15beta-hydroxylation of deoxycorticosterone using the adrenal redox proteins adrenodoxin and adrenodoxin reductase. Inspite of catalytic activity no substrate binding was detectable by UV-Vis spectroscopy. In contrast, an effect of substrate binding has been detected using the CO stretch mode infrared spectrum indicating that deoxycorticosterone binds in the heme pocket near the iron ligand.

Dithionite reduced carbon monoxide complex of cytochrome P450cam is a monomer

Sedimentation experiments on cytochrome P450cam (CYP101) has been performed to compare the molecular mass of the protein in the oxidized state and as carbon monoxide complex. The oxidized protein in the absence of beta-mercaptoethanol is a dimer with a molecular mass of 92 kDa. Addition of mercaptoethanol avoids completely the dimerization. Dithionite reduced P450cam in the presence of carbon monoxide has been found to be a monomeric protein.