Amylose synthesized in vitro by amylosucrase: morphology, structure, and properties

Production and characterization of recrystallized linear α-glucans at different temperatures for controllable thermostability and digestibility

Molecular structure of linear α-glucans (LAGs) and crystallization temperature have great effects on the thermostability and digestibility of recrystallized LAGs, but the recrystallization behaviors of LAGs in response to temperature remain unclear. Here LAGs with different lengths were prepared from amylopectin via chain elongation and debranching. Recrystallization of LAGs at 4 °C yielded B-type crystalline structure with relative crystallinity ranged from 23.7% to 46.1%. With a chain length of 40.2, an A-type allomorph was observed for a slow recrystallization at 50 °C. Differential scanning calorimetry suggested that A-type crystal had a higher thermostability than the B-type crystal, and increasing LAGs' chain length improved the dimension of double helices, whose assembly produced starch crystallites that enhanced the thermostability and decreased the in vitro digestibility of recrystallized LAGs. An improved thermostability of recrystallized LAGs preserved their ordered structures and kept the resistance to digestive enzymes, with a RS content up to 75.4%.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Molecular modulating of amylopectin's structure promoted the formation of starch-unsaturated fatty acids complexes with controlled digestibility and improved stability to oxidation

In this study, waxy corn starch (WCS) was modified by amylosucrase and pullulanase, producing linear starch chains with elongated length that favored the complexation with unsaturated fatty acids (uFAs). Compared to native WCS, the amylosucrase-modified WCS with an average chain length of 47.8 was easier to form V-type complexes with oleic acid, while increasing the degree of unsaturation impeded the formation of V-type complexes. The pullulanase treatment hydrolyzed the branching points of amylosucrase-modified WCS and the linear starch chains could forme V-type complexes with oleic acid, linoleic acid, and linolenic acid, with V-type crystallinity decreasing from 38.2 % to 20.1 %. V-type complexes had a lower thermal stability than the B-type starch crystallites, and their peak melting temperature ranged from 67.2 to 79.0 °C. The content of resistant starch in the complexes was in the range of 21.8 %-40.9 % and the formation of V-type complexes decreased the susceptibility of uFAs to oxygen.

Enzymatic Synthesis of α-Glucan Microparticles Using Amylosucrases from Bifidobacterium Species and Its Physicochemical Properties

α-Glucan microparticles (GMPs) have significant potential as high-value biomaterials in various industries. This study proposes a bottom-up approach for producing GMPs using four amylosucrases from Bifidobacterium sp. (BASs). The physicochemical characteristics of these GMPs were analyzed, and the results showed that the properties of the GMPs varied depending on the type of enzymes used in their synthesis. As common properties, all GMPs exhibited typical B-type crystal patterns and poor colloidal dispersion stability. Interestingly, differences in the physicochemical properties of GMPs were generated depending on the synthesis rate of linear α-glucan by the enzymes and the degree of polymerization (DP) distribution. Consequently, we found differences in the properties of GMPs depending on the DP distribution of linear glucans prepared with four BASs. Furthermore, we suggest that precise control of the type and characteristics of the enzymes provides the possibility of producing GMPs with tailored physicochemical properties for various industrial applications.

Secretory expression of amylosucrase in Bacillus licheniformis through twin-arginine translocation pathway

Amylosucrase (EC 2.4.1.4) is a versatile enzyme with significant potential in biotechnology and food production. To facilitate its efficient preparation, a novel expression strategy was implemented in Bacillus licheniformis for the secretory expression of Neisseria polysaccharea amylosucrase (NpAS). The host strain B. licheniformis CBBD302 underwent genetic modification through the deletion of sacB, a gene responsible for encoding levansucrase that synthesizes extracellular levan from sucrose, resulting in a levan-deficient strain, B. licheniformis CBBD302B. Neisseria polysaccharea amylosucrase was successfully expressed in B. licheniformis CBBD302B using the highly efficient Sec-type signal peptide SamyL, but its extracellular translocation was unsuccessful. Consequently, the expression of NpAS via the twin-arginine translocation (TAT) pathway was investigated using the signal peptide SglmU. The study revealed that NpAS could be effectively translocated extracellularly through the TAT pathway, with the signal peptide SglmU facilitating the process. Remarkably, 62.81% of the total expressed activity was detected in the medium. This study marks the first successful secretory expression of NpAS in Bacillus species host cells, establishing a foundation for its future efficient production.

ONE-SENTENCE SUMMARY

Amylosucrase was secreted in Bacillus licheniformis via the twin-arginine translocation pathway.

Resistant starch formation mechanism of amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment

The aim of this study was to reveal the underlying mechanism contributing towards the formation of resistant starch (RS) in amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment. The branch chains of waxy corn starch were continuously elongated by amylosucrase, and the retrogradation of elongated starches with weight-average chain length (CL_w¯) of 27.0-37.6 yielded B-type retrograded starches (MSs) with crystallinity increasing from 33.1 % (MS-5) to 41.4 % (MS-30). Increasing the starch crystallinity improved the content of RS from 6.7 % of MS-5 to be as much as 41.0 % of MS-30. During the hydrothermal treatment, MS-5 with CL_w¯ of 27.0 favored the B → A allomorphic transition, leading to the decreased starch digestibility. Moreover, the hydrothermal treatment facilitated the assembly of double helices to increase starch crystallinity, which further increased the content of RS. The findings of the present study may assist the preparation of functional starches with controllable digestibility.

Macromolecular α-glucans with α-1,3/α-1,4 branching structures produced using dual glycosyltransferases: Elucidation of physicochemical and slowly digestible properties

Amylosucrase from Neisseria polysaccharea (NpAS) produces the linear amylose-like α-glucans by the elongation property from sucrose, and 4,3-α-glucanotransferase from Lactobacillus fermentum NCC 2970 (4,3-αGT) newly synthesizes the α-1,3 linkages after cleaving the α-1,4 linkages by the glycosyltransferring property. This study focused on the synthesis of high molecular α-1,3/α-1,4-linked glucans by combining NpAS and 4,3-αGT and analyzed their structural and digestive properties. The enzymatically synthesized α-glucans have a molecular weight of >1.6 × 10⁷ g mol^-1, and the α-4,3 branching ratios on the structures increased as the amount of 4,3-αGT increased. The synthesized α-glucans were hydrolyzed to linear maltooligosaccharides and α-4,3 branched α-limit dextrins (α-LDx) by human pancreatic α-amylase, and the amounts of produced α-LDx were increased depending on the ratio of synthesized α-1,3 linkages. In addition, approximately 80 % of the synthesized products were partially hydrolyzed by mammalian α-glucosidases, and the glucose generation rates decelerated as the amounts of α-1,3 linkages increased. In conclusion, new types of α-glucans with α-1,4 and α-1,3 linkages were successfully synthesized by a dual enzyme reaction. These can be utilized as slowly digestible and prebiotic ingredients in the gastrointestinal tract due to their novel linkage patterns and high molecular weights.

Fabrication of phytoglycogen-derived core-shell nanoparticles: Structure and characterizations

The objective of this work was to investigate the fabrication of core-shell nanoparticles using phosphorylase-catalyzed chain extension of phytoglycogen, and to analyze the changes of structure and characterizations in detail. During the glucosylation reaction, the inorganic phosphate increased substantially up to 2.3 mg/mL in the initial 12 h, and then increased incrementally to 2.5 mg/mL at 24 h. The similar to trends was observed for increasing Mw and Rz over time, due to glucosyl transfers on the surface chain to form a corona around the phytoglycogen core with a larger size. Phosphorylase modification increases the percentages of longer chain fractions and the average chain length increased from degree of polymerization (DP) 11.6 to DP 48.2. The modified phytoglycogen exhibited the characteristic of B-type crystalline structure, indicating that the specific core-shell nanoparticle with inner amorphous nature and outer crystalline layer. The above results revealed that the potentiality of enzymatic chain elongation of phytoglycogen to design novel core-shell nanoparticle with tailor-made structure and functionality.

Enzymatic synthesis, structure of isomalto/malto-polysaccharides from linear dextrins prepared by retrogradation

Isomalto/malto-polysaccharides (IMMPs) with degree of polymerization (DP) 10-100 have novel potential applications, including enhanced solubility and anti-inflammatory. However, there are minimal synthetic methods for preparing IMMPs with a relatively higher DP, which is due to the lack of suitable molecular weight linear dextrins (I-LDs). The existing I-LDs preparation methods have disadvantages, such as low yield and uncontrollable molecular weight. Therefore, this study proposes a method for preparing soluble linear dextrins (S-LDs, M_w = 2.1 kDa) by low-temperature retrogradation from debranched waxy corn starch (M_w = 3.0 kDa). S-LDs reacted with 4,6-α-glucanotransferase GtfB-ΔN from Limosilactobacillus reuteri 121 to yield IMMPs with 12.3 kDa M_w and 83.8% α1 → 6 linkages content. Process monitoring revealed the synthesis mechanism and a detailed reaction process. Finally, IMMPs were identified by enzyme fingerprinting as α1 → 6 chains with α1 → 4 fragments inlaid at the reducing, non-reducing end, and middle part. This study provides a new synthesis method and more structural information for IMMPs.

Effect of highly branched α-glucans synthesized by dual glycosyltransferases on the glucose release rate

Increasing α-1,6 linkages in starch molecules generates a large amount of α-limit dextrins (α-LDx) during α-amylolysis, which decelerate the release of glucose at the intestinal α-glucosidase level. This study synthesized highly branched α-glucans from sucrose using Neisseria polysaccharea amylosucrase and Rhodothermus obamensis glycogen branching enzyme to enhance those of slowly digestible property. The synthesized α-glucans (Mw: 1.7-4.9 × 10⁷ g mol^-1) were mainly composed of α-1,4 linkages and large proportions of α-1,6 linkages (7.5%-9.9%). After treating the enzymatically synthesized α-glucans with the human α-amylase, the quantity of branched α-LDx (36.2%-46.7%) observed was higher than that for amylopectin (26.8%) and oyster glycogen (29.1%). When the synthetic α-glucans were hydrolyzed by mammalin α-glucosidases, the glucose generation rate decreased because the amount of embedded branched α-LDx increased. Therefore, the macro-sized branched α-glucans with high α-LDx has the potential to be used as slowly digestible material to attenuate postprandial glycemic response.

Differentiated structure of synthetic glycogen-like particle by the combined action of glycogen branching enzymes and amylosucrase

Glycogen-like particles (GLPs) were built up from sucrose by applying de novo one-pot enzymatic process of amylosucrase (ASase; 6 U·mL^-1) and glycogen branching enzymes (GBEs; 0.001 and 0.005 U·mL^-1). Due to different chain-length transferring patterns of GBEs, structurally differentiated GLPs were synthesized. Yields of GLPs synthesized at pH 7.0 and 30 °C were improved by increasing the GBE/ASase ratio. Branching degrees of GLPs obviously was increased along with the ratio of GBEs, of which result was directly supported by shortened branch-chain length with greater GBE activity. Long branch chains seemed to play as efficient acceptor molecules to bind newly transferred branch chains especially at lower ratio of GBE/ASase, resulting in greater molecular weight and size of GLP with higher proportion of them. Molecular weight, size, and density of GLPs were ranged from 7.37 × 10⁵ to 1.94 × 10⁸ g·mol^-1, from 23.70 to 52.65 nm, and from 7.99 to 374.32 g·mol^-1·nm^-3, respectively. By increasing GBE/ASase ratio, more compact GLP architecture was fabricated due to increased weight and reduced size with exception of a unique GBE. GLPs were efficiently synthesized by two different glycosyltransferases, and their chemical structures were controllable by source and ratio of GBEs due to their different branch-chain transferring specificity.

The Influence of Starch Modification with Amylosucrase Treatment on Morphological Features

Amylosucrase (AS) is a starch-modifying enzyme from Neisseria polysaccharea used to produce low-glycemic starches such as slowly digestible starch (SDS) and resistant starch (RS). The morphology of native, control, and AS-modified waxy corn starches (230 and 460 U) was examined using a particle size analyzer and field-emission scanning electron microscopy (FE-SEM). AS modification of the starch elongated the glucose and resulted in higher SDS and RS contents. The mean particle sizes of the control, 230 U-AS-, and 460 U-AS-treated starches were 56.6 µm, 128.0 µm, and 176.5 μm, respectively. The surface of the 460 U-AS-treated starch was entirely porous and coral-like, while the 230 U-AS-treated starch had a partial dense and flat surface which did not react with AS. FE-SEM of the granule cross section confirmed that the center contained a dense and flat region without any evidence of AS reaction to either of the AS-treated starches. It was assumed that the particle size and porous and sponge-like particle features might be related to the SDS and RS fractions.

Amylopectin-Sodium Palmitate Complexes as Sustainable Nanohydrogels with Tunable Size and Fractal Dimensions

Starch-based nanohydrogels with polyelectrolyte characteristics may find unique applications. Herein, the branch chains of amylopectin (AP) were elongated to different extents by amylosucrase, followed by complexation with sodium palmitate (SP) to produce nanohydrogels. Modified AP (mAP) with a longer chain length displayed a better ability to complex with SP, and the mixtures exhibited nanosized particles with an average diameter ranging from 153.5 to 1049.8 nm. The gel strength of bulk nanohydrogels was dependent on the chain length of mAP and SP content, and their fractal dimension was between 1.82 and 2.45. The crystalline structure of native AP was altered from A- to B-type after chain elongation and, subsequently, to B + V-type after complexing with SP. Diffraction peaks of the complexes at 2θ of 7.5°, 12.9°, and 19.8° implied that the AP side chains formed left-handed single helices and the hydrophobic SP was entrapped in the helix cavity.

Comparative study on four amylosucrases from Bifidobacterium species

Amylosucrase (ASase) is α-glucan-producing enzyme. Four putative ASase genes (bdas, blas, bpas, and btas) were cloned from Bifidobacterium sp. and expressed in Escherichia coli. All ASases from Bifidobacterium sp. (BAS) displayed typical ASase properties with slightly different characteristics. Among the BASs studied, BdAS and BpAS showed maximal enzyme activities at 35 and 30 °C, respectively, whereas BlAS and BtAS were maximally active at higher temperatures, i.e., 45 and 50 °C, respectively. BpAS exhibited optimum pH under slightly basic conditions (pH 8.0), while BdAS, BlAS, and BtAS preferred weakly acidic conditions (pH 5.0-6.0). All BASs showed higher isomerization activities. Particularly, BlAS produced more trehalulose than turanose. Although polymerization was the highest for BtAS, BtAS synthesized α-1, 4-glucans with a lower degree of polymerization than that of the other BASs. The versatile properties of the BASs described could contribute to the efficient production of highly valuable biomaterials for the agriculture, food, and pharmaceutical industries.

Versatile biotechnological applications of amylosucrase, a novel glucosyltransferase

Amylosucrase (AS; EC 2.4.1.4) is an enzyme that has great potential in the biotechnology and food industries, due to its multifunctional enzyme activities. It can synthesize α-1,4-glucans, like amylose, from sucrose as a sole substrate, but importantly, it can also utilize various other molecules as acceptors. In addition, AS produces sucrose isomers such as turanose and trehalulose. It also efficiently synthesizes modified starch with increased ratios of slow digestive starch and resistant starch, and glucosylated functional compounds with increased water solubility and stability. Furthermore, AS produces turnaose more efficiently than other carbohydrate-active enzymes. Amylose synthesized by AS forms microparticles and these can be utilized as biocompatible materials with various bio-applications, including drug delivery, chromatography, and bioanalytical sciences. This review not only compares the gene and enzyme characteristics of microbial AS, studied to date, but also focuses on the applications of AS in the biotechnology and food industries.

Thermostable Amylosucrase from Calidithermus timidus DSM 17022: Insight into Its Characteristics and Tetrameric Conformation

Amylosucrase (EC 2.4.1.4, ASase), a typical carbohydrate-active enzyme, can catalyze 5 types of reactions and recognize more than 50 types of glycosyl acceptors. However, most ASases are unstable even at 50 °C, which limits their practical industrial applications. In this study, an extremely thermostable ASase was discovered from Calidithermus timidus DSM 17022 (CT-ASase) with an optimal activity temperature of 55 °C, half-life of 1.09 h at 70 °C, and melting temperature of 74.47 °C. The recombinant CT-ASase was characterized as the first tetrameric ASase, and a structure-based truncation mutation was conducted to confirm the effect of tetrameric conformation on its thermostability. In addition, α-1,4-glucan was found to be the predominant product of CT-ASase at pH 6.0-8.0 and 30-60 °C.

Physicochemical properties of partially α-glucan-coated normal corn starch formed by amylosucrase from Neisseria polysaccharea

Amylosucrase (AS) is a glycosyltransferase that produces linear α-1,4 glucans using sucrose as the sole substrate. In this study, for various applications, α-glucan-coated starch (α-GCS) was produced by AS (20 U/L_reactant) from Neisseria polysaccharea to improve the physicochemical properties of raw normal corn starch (NCS) by applying different reaction conditions (i.e., varying the substrate concentration, pH, and temperature). Field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) showed that raw NCS was successfully coated by α-glucan. Differential scanning calorimetry (DSC) and rapid viscosity analyses (RVA) of the α-GCS confirmed that the α-glucan coating decreased the degree of retrogradation. Notably, compared to raw NCS as a control, starch retrogradation was significantly (p < 0.05) decreased by 13.7% after five weeks. Therefore, the novel α-GCS can be applied as a functional material for controlled retrogradation in the starch-based food industry for shelf-life extension.

Effect of Lecithin on the Spontaneous Crystallization of Enzymatically Synthesized Short-Chain Amylose Molecules into Spherical Microparticles

Here, we report a facile and effective one-pot approach to prepare uniform amylose-based polymeric microparticles (PMPs) through enzymatic synthesis of short-chain amylose (SCA) followed by spontaneous self-assembly of the SCA in the presence of lecithin. The effect of lecithin on nucleation and growth kinetics of amylose microparticles was investigated by monitoring the turbidity of reaction solution and the size of particles over the course of the self-assembly process. The results suggest that lecithin played a critical role in controlling the self-assembly kinetics to form uniform amylose microparticles through steric stabilization of the growing particles and diffusion-limited growth effect. The crystallinity of amylose microparticles was not affected by lecithin, implying that lecithin did not disrupt the crystal structure within the particle and would mainly be present on the surface of the microparticles. Considering its biodegradable and biocompatible nature, the amylose-based microparticles would find a range of useful applications in the area of food, cosmetics, medicine, chromatography and other related materials sciences.

Synthesis of novel α-glucans with potential health benefits through controlled glucose release in the human gastrointestinal tract

The glycemic carbohydrates we consume are currently viewed in an unfavorable light in both the consumer and medical research worlds. In significant part, these carbohydrates, mainly starch and sucrose, are looked upon negatively due to their rapid and abrupt glucose delivery to the body which causes a high glycemic response. However, dietary carbohydrates which are digested and release glucose in a slow manner are recognized as providing health benefits. Slow digestion of glycemic carbohydrates can be caused by several factors, including food matrix effect which impedes α-amylase access to substrate, or partial inhibition by plant secondary metabolites such as phenolic compounds. Differences in digestion rate of these carbohydrates may also be due to their specific structures (e.g. variations in degree of branching and/or glycosidic linkages present). In recent years, much has been learned about the synthesis and digestion kinetics of novel α-glucans (i.e. small oligosaccharides or larger polysaccharides based on glucose units linked in different positions by α-bonds). It is the synthesis and digestion of such structures that is the subject of this review.

Starch-Flavor Complexation Applied to 2-Acetyl-1-pyrroline

The pleasant popcorn-like smelling compound 2-acetyl-1-pyrroline (2AP) occurs naturally in many foods but is scarcely used as a flavoring agent due to its great instability. In this work, we evaluate the potential of high amylose corn starch to complex and stabilize 2AP. The methodology was first optimized using model compounds, 2-acetylpyridine and 2-acetyl-2-thiazoline, and then applied to 2AP. Complexes were successfully prepared and characterized using X-ray diffraction, gas chromatography, and differential scanning calorimetry. Loadings of up to 0.504 (±0.071)% 2AP were achieved, and storage studies showed that over half of the flavor was retained after 2 weeks at 0% relative humidity. To our knowledge, this is the first demonstration that 2AP can form amylose inclusion complexes and may lead to a method to effectively stabilize this labile aroma compound.

Amylosucrase as a transglucosylation tool: From molecular features to bioengineering applications

Amylosucrase (EC 2.4.1.4, ASase), an outstanding sucrose-utilizing transglucosylase in the glycoside hydrolase family 13, can produce glucans with only α-1,4 linkages. Generally, on account of a double-displacement mechanism, ASase can catalyze polymerization, isomerization, and hydrolysis reactions with sucrose as the sole substrate, and has transglycosylation capacity to attach glucose molecules from sucrose to extra glycosyl acceptors. Based on extensive enzymology research, this review presents the characteristics of various ASases, including their microbial metabolism, preparation, and enzymatic properties, and exhibits structure-based strategies in the improvement of activity, specificity, and thermostability. As a vital transglucosylation tool of producing sugars, carbohydrate-based bioactive compounds, and materials, the bioengineering applications of ASases are also systematically summarized.

GH13 amylosucrases and GH70 branching sucrases, atypical enzymes in their respective families

Amylosucrases and branching sucrases are α-retaining transglucosylases found in the glycoside-hydrolase families 13 and 70, respectively, of the clan GH-H. These enzymes display unique activities in their respective families. Using sucrose as substrate and without mediation of nucleotide-activated sugars, amylosucrase catalyzes the formation of an α-(1 → 4) linked glucan that resembles amylose. In contrast, the recently discovered branching sucrases are unable to catalyze polymerization of glucosyl units as they are rather specific for dextran branching through α-(1 → 2) or α-(1 → 3) branching linkages depending on the enzyme regiospecificity. In addition, GH13 amylosucrases and GH70 branching sucrases are naturally promiscuous and can glucosylate different types of acceptor molecules including sugars, polyols, or flavonoids. Amylosucrases have been the most investigated glucansucrases, in particular to control product profiles or to successfully develop tailored α-transglucosylases able to glucosylate various molecules of interest, for example, chemically protected carbohydrates that are planned to enter in chemoenzymatic pathways. The structural traits of these atypical enzymes will be described and compared, and an overview of the potential of natural or engineered enzymes for glycodiversification and chemoenzymatic synthesis will be highlighted.

Efficient Biocatalytic Production of Cyclodextrins by Combined Action of Amylosucrase and Cyclodextrin Glucanotransferase

A novel enzymatic process for cyclodextrin (CD) production was developed by utilizing sucrose as raw material instead of corn starch. Cyclodextrin glucanotransferase (CGTase) from Bacillus macerans was applied to produce the CDs from linear α-(1,4)-glucans, which were obtained by Neisseria polysaccharea amylosucrase (NpAS) treatment on sucrose. The greatest CD yield (21.1%, w/w) was achieved from a one-pot dual enzyme reaction at 40 °C for 24 h. The maximum level of CD production (15.1 mg/mL) was achieved with 0.5 M sucrose in a simultaneous mode of dual enzyme reaction, whereas the reaction with 0.1 M sucrose was the most efficient with regard to conversion yield. Consequently, dual enzyme synthesis of CDs was successfully carried out with no need of starch material. This result can be applied as a novel efficient bioconversion process that does not require the high temperature necessary for starch liquefaction by thermostable α-amylase in conventional industrial processing.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.