Hydrogen bonding versus ion pairing in polyelectrolyte multilayers with homopolynucleotides

Synthetic versus Natural Precursor Layer: A Study on the Properties of Biocompatible Chitosan/Carboxymethyl Cellulose Nanofilms

Polyelectrolyte multilayers are nanofilms with vast applications in numerous areas such as medicine and food industry. Recently, they have been getting a lot of attention as potential food coatings for the prevention of fruit decay during transportation and storage, and therefore the coatings need to be biocompatible. In this study, we fabricated thin films made of biocompatible polyelectrolytes, positively charged polysaccharide chitosan, and negatively charged carboxymethyl cellulose on a model silica surface. Typically, to enhance the properties of the prepared nanofilms, the first layer (precursor layer) of poly(ethyleneimine) is used. However, for the construction of completely biocompatible coatings, this could be problematic due to potential toxicity. This study offers an option for a viable candidate as a replacement precursor layer: chitosan itself was adsorbed from a more concentrated solution. In the case of chitosan/carboxymethyl cellulose films, using chitosan over poly(ethyleneimine) as a precursor layer has shown a twofold increase in film thickness, as well as an increase in film roughness. In addition, these properties can be tuned by the presence of a biocompatible background salt (e.g., sodium chloride) in the deposition solution that has proven to change the film thickness and surface roughness depending on the salt concentration. Such a straightforward way of tuning the properties of these films combined with their biocompatibility makes this precursor material a prime candidate for use as a potential food coating.

Multivalency in Heteroternary Complexes on Cucurbit[8]uril-Functionalized Surfaces: Self-assembly, Patterning, and Exchange Processes

The spatial confinement of multivalent azopyridine guest molecules mediated by cucurbit[8]urils is described. Fluorescent dye-labelled multivalent azopyridine molecules were attached to preformed methyl viologen/cucurbit[8]uril inclusion complexes in solution and at surfaces. The formation of the resulting heteroternary host-guest complexes was verified in solution and on gold substrates. Surface binding constants of the multivalent ligands were two orders of magnitude higher than that of the monovalent one. Poly-l-lysine grafted with oligo(ethylene glycol) and maleimide moieties was deposited on cyclic olefin polymer surfaces and further modified with thiolated methyl viologen and cucurbit[8]uril. Defined micrometer-sized patterns were created by soft lithographic techniques. Supramolecular exchange experiments were performed on these surface-bound heterocomplexes, which allowed the creation of cross-patterns by taking advantage of the molecular valency, which led to the substitution of the monovalent guest by the multivalent guests but not vice versa.

Layer-by-Layer Assembly of Nanosized Membrane Fractions for the Assessment of Cytochrome P450 Xenobiotic Metabolism

Herein, we report the use of sequential layer-by-layer (LbL) assembly to design nanostructured films made of recombinant bacterial membrane fractions (MF), which overexpress cytochrome P450 (CYP) and cytochrome P450 reductase. The ability to incorporate MF in LbL multilayered films is demonstrated by an in situ quartz crystal microbalance with dissipation monitoring using poly-l-lysine or poly-l-ornithine as a polycation. Results show that MF preserve a remarkable CYP1A2 catalytic property in the adsorbed phase. Moreover, atomic force microscopy images reveal that MF mostly adopt a flattened conformation in the adsorbed phase with an extensive tendency to aggregate within the multilayered films, which is more pronounced when increasing the number of bilayers. Interestingly, this behavior seems to enhance the ability of embedded MF to remain active after repeated uses. The proposed strategy constitutes a practical alternative for the immobilization of active CYP enzymes. Besides their fundamental interest, MF-based multilayers are useful nano-objects for the creation of new biomimetic reactors for the assessment of xenobiotic metabolism.

In Situ ATR FTIR Spectroscopic Study of the Formation and Hydration of a Fucoidan/Chitosan Polyelectrolyte Multilayer

The formation of fucoidan/chitosan-based polyelectrolyte multilayers (PEMs) has been studied with in situ Fourier transform infrared (FTIR) spectroscopy. Attenuated total reflectance (ATR) FTIR spectroscopy has been used to follow the sequential build-up of the multilayer, with peaks characteristic of each polymer being seen to increase in intensity with each respective adsorption stage. In addition, spectral processing has allowed for the extraction of spectra from individual adsorbed layers, which have been used to provide unambiguous determination of the adsorbed mass of the PEM at each stage of formation. The PEM was seen to undergo a transition in growth regimes during build-up: from supra-linear to linear. In addition, the wettability of the PEM has been probed at each stage of the build-up, using the captive bubble contact angle technique. The contact angles were uniformly low, but showed variation in value depending on the nature of the outer polymer layer, and this variation correlated with the overall percentage hydration of the PEM (determined from FTIR and quartz crystal microbalance data). The nature of the hydration water within the polyelectrolyte multilayer has also been studied with FTIR spectroscopy, specifically in situ synchrotron ATR FTIR microscopy of the multilayer confined between two solid surfaces. The acquired spectra have enabled the hydrogen bonding environment of the PEM hydration water to be determined. The PEM hydration water is seen to have an environment in which it is subject to fewer hydrogen bonding interactions than in bulk electrolyte solution.

Tuning polyelectrolyte multilayer structure by exploiting natural variation in fucoidan chemistry

Fucoidan is a sulfated polysaccharide that is extracted primarily from seaweed. The polymer contains a natural variation in chemistry based upon the species of seaweed from which it is extracted. We have used two different fucoidans from two different seaweed species (Fucus vesiculosus - FV; and Undaria pinnatifida - UP) as polyanions for the formation of polysaccharide-based polyelectrolyte multilayers (PEMs), to determine if the chemistry of different fucoidans can be chosen to fine-tune the structure of the polymer film. Partially acetylated chitosan was chosen as the polycation for the work, and the presented data illustrate the effect of secondary hydrogen bonding interactions on PEM build-up and properties. Ellipsometry and quartz crystal microbalance with dissipation monitoring (QCM-D) measurements performed during film build-up enabled detailed measurements of layer thickness, adsorbed mass, and the dynamics of the multilayer formation process. High quality atomic force microscopy (AFM) images revealed the differences in morphology of the PEMs formed from the two fucoidans, and allowed for a more direct layer thickness measurement. X-ray photoelectron spectroscopy (XPS) confirmed the chemistry of the films, and an indication of the altered interactions between chitosan and fucoidan with variation in fucoidan type, but also with layer number. Distinct differences were observed between multilayers formed with the two fucoidans, with those constructed using UP having thinner, denser, less hydrated layers than those constructed using FV. These differences are discussed in the context of their varied chemistry, primarily their difference in molecular weight and degree of acetylation.

Enhancement of surface wettability via the modification of microtextured titanium implant surfaces with polyelectrolytes

Micrometer- and submicrometer-scale surface roughness enhances osteoblast differentiation on titanium (Ti) substrates and increases bone-to-implant contact in vivo. However, the low surface wettability induced by surface roughness can retard initial interactions with the physiological environment. We examined chemical modifications of Ti surfaces [pretreated (PT), R(a) ≤ 0.3 μm; sand blasted/acid etched (SLA), R(a) ≥ 3.0 μm] in order to modify surface hydrophilicity. We designed coating layers of polyelectrolytes that did not alter the surface microstructure but increased surface ionic character, including chitosan (CHI), poly(L-glutamic acid) (PGA), and poly(L-lysine) (PLL). Ti disks were cleaned and sterilized. Surface chemical composition, roughness, wettability, and morphology of surfaces before and after polyelectrolyte coating were examined by X-ray photoelectron spectroscopy (XPS), contact mode profilometry, contact angle measurement, and scanning electron microscopy (SEM). High-resolution XPS spectra data validated the formation of polyelectrolyte layers on top of the Ti surface. The surface coverage of the polyelectrolyte adsorbed on Ti surfaces was evaluated with the pertinent SEM images and XPS peak intensity as a function of polyelectrolyte adsorption time on the Ti surface. PLL was coated in a uniform thin layer on the PT surface. CHI and PGA were coated evenly on PT, albeit in an incomplete monolayer. CHI, PGA, and PLL were coated on the SLA surface with complete coverage. The selected polyelectrolytes enhanced surface wettability without modifying surface roughness. These chemically modified surfaces on implant devices can contribute to the enhancement of osteoblast differentiation.

Self-assembled Materials Containing Complementary Nucleobase Molecular Recognition

Here we report the nucleic acid/cationic amphiphile based-materials in which we exchange the counter-ions of the polyanionic backbone of the nucleic acids with the cationic amphiphiles to form self-assembled transparent films with the thickness of several microns. Predominantly, single stranded poly(A), poly(U) and double stranded poly(AU) were employed for these studies. Small-angle X-ray scattering (SAXS) experiments suggested lamellar-like structure for all the film samples. However, the molecule length as well as the molecular structure of nucleic acids can affect the topology and mechanical properties of these films. Complementary base-paring of poly(AU) is reported here with comparison to poly(A) and poly(U) complexes.

Polyelectrolyte multilayers of diblock copolymer micelles with temperature-responsive cores

We report on assembly and stimuli-response behavior of layer-by-layer (LbL) films of pH- and temperature-responsive cationic diblock copolymer micelles (BCMs) of poly(2-(dimethylamino)ethyl methacrylate)-block-poly(N-isopropylacrylamide) (PDMA-b-PNIPAM) and a linear polyanion polystyrene sulfonate (PSS). As a function of solution pH at temperatures above lower critical solution temperature (LCST) of PNIPAM, PDMA-b-PNIPAM micelles have been demonstrated earlier to exhibit an abrupt change in micellar aggregation number and hydrodynamic size between larger and smaller BCMs (LBCMs and SBCMs, respectively). Here, LBCMs or SBCMs were included within LbL films through self-assembly with a polyanion, and film pH and temperature responses were studied using ellipsometry and atomic force microscopy (AFM). Both types of micelle preserved their micellar morphology when adsorbed at the surface of oxidized silicon wafers coated with PSS-terminated precursor layer at a constant pH. Response of adsorbed BCMs to temperature and pH variations was strongly dependent on whether or not BCMs were coated with the PSS layer. While monolayers of LBCMs lost their original dry morphology in response to pH or temperature variations, depositing a PSS layer atop LBCMs inhibited such irreversible restructuring. As a result of wrapping around and strong binding of PSS chains with LBCM micelles, BCM/PSS assemblies preserved their original dry state morphology despite the application of pH and temperature triggers. However, the wet-state film response to pH and temperature stimuli was drastically different. Swelling of BCM/PSS multilayers was strongly affected by temperature but was almost independent of pH due to neutralization of BCM PDMA's coronal charge with PSS. Cycling the temperature below and above PNIPAM's LCST caused PNIPAM chains within BCM cores to swell or collapse, resulting in reversible swelling transitions in the entire BCM/PSS assemblies. Temperature-controlled switching between the hydrophobic and hydrophilic state of assembled micellar cores was also used to regulate the release of a micelle-loaded hydrophobic pyrene dye, whose release rate increased at temperatures below PNIPAM's LCST.

Influence of salt concentration on the assembly of DNA multilayer films

DNA multilayer films are promising candidates for a plethora of applications, including sensing, diagnostics, and drug/gene delivery. Fabricated solely from DNA, the use of salt in forming DNA multilayers is crucial in promoting and maintaining hybridization of complementary base pairs by minimizing the repulsive forces between the oligonucleotides and preventing disassembly of the layers once formed. Herein, we examine the role of salt on the assembly of DNA films assembled from oligonucleotides composed of two homopolymeric diblocks (polyA(n)G(n) and polyT(n)C(n)) in salt concentrations ranging from 0.1 to 2 M. Using quartz crystal microgravimetry (QCM) and flow cytometry, we show that films assembled at high salt concentrations (2 M salt) exhibit a different morphology and are denser than those assembled from lower (1 M salt) salt solutions. Formation of the T x A*T triplex in solution and within the DNA film was also studied using circular dichroism (CD) and QCM, respectively. DNA films assembled using oligonucleotides of various lengths (20- to 60-mer) at high salt concentration (2 M salt) showed no significant influence on the film growth. This work shows that salt plays an important role in the assembly and final morphology of DNA multilayer films, hence enabling films with different properties to be tailored.

Chemiluminescent bead-based hybridization assay for the detection of genomic DNA from E. coli in purified plasmid samples

A bead-based hybridization assay was developed for detection of traces of E. coli genomic DNA (gDNA) present in purified plasmid DNA (pDNA) samples. Standards of gDNA and pDNA samples were sheared by sonication and adsorbed onto aminopropyl controlled pore glass (CPG) particles (130 microm). A preliminary study was conducted to optimize the amount of DNA adsorbed on the particles. Results indicated that maximum attachment efficiency was obtained by adsorbing DNA for 2 h in 0.2 x SSC, pH 5.7. The DNA-bound particles were hybridized overnight with a 181-bp digoxigenin-labeled probe, specific for gDNA. Following a chemiluminescent detection protocol, signal intensities of the standards were plotted as a function of initial gDNA concentration. The calculated detection limit (LOD) was 1.4 pM of gDNA. The assay was able to detect gDNA in pure plasmid preparations at the 1% level even in the presence of 1,000-fold excess of noncomplementary target. Hybridization results were compared with a quantitative real-time PCR assay. Both methods afforded similar accurate results at the 95% confidence level.

Self-assembly effect during the adsorption of polynucleotides on stearic acid langmuir-blodgett monolayer

Interaction of polyadenylic acid, poly(A), with stearic acid Langmuir-Blodgett (LB) monolayer was studied in different electrolyte surroundings. For this purpose LB films of stearic acid, transferred on the mica substrate from poly(A) containing subphase, were analyzed with atomic force microscopy (AFM). The density of polynucleotides surface coverage is ruled by the monovalent electrolyte concentration in the subphase that is in good agreement with previous results. Divalent cations in the subphase are needed to stabilize poly(A) molecules on the surface through formation of "salt bridges". At the very low divalent electrolyte concentration polynucleotides adsorb on the LB film to domains in which the effect of self-assembly is observed. Increase of divalent electrolyte concentration leads to the loss of this orientation effect. The explanation of this effect is proposed.