Development of a bioactive fiber with immobilized synthetic peptides designed from the active site of a beetle defensin

Sustainable, Site-Specific Linkage of Antimicrobial Peptides to Cotton Textiles

A new general method to covalently link a peptide to cotton via thiazolidine ring formation is developed. Three different analogues of an ultrashort antibacterial peptide are synthesized to create an antibacterial fabric. The chemical ligation approach to the heterogeneous phase made up of insoluble cellulose fibers and a peptide solution in water is adapted. The selective click reaction occurs between an N-terminal cysteine on the peptide and an aldehyde on the cotton matrix. The aldehyde is generated on the primary alcohol of glucose by means of the enzyme laccase and the cocatalyst 2,2,6,6-tetramethylpiperidine-1-oxyl. This keeps the pyranose rings intact and may bring a benefit to the mechanical properties of the fabric. The presence of the peptide on cotton is demonstrated through instant colorimetric tests, UV spectroscopy, IR spectroscopy, and X-ray photoelectron spectroscopy analysis. The antibacterial activity of the peptides is maintained even after their covalent attachment to cotton fibers.

Covalent Graft of Lipopeptides and Peptide Dendrimers to Cellulose Fibers

Introduction: Bacterial proliferation in health environments may lead to the development of specific pathologies, but can be highly dangerous under particular conditions, such as during chemotherapy. To limit the spread of infections, it is helpful to use gauzes and clothing containing antibacterial agents. As cotton tissues are widespread in health care environments, in this contribution we report the preparation of cellulose fibers characterized by the covalent attachment of lipopeptides as possible antimicrobial agents. Aim: To covalently link peptides to cotton samples and characterize them. Peptides are expected to preserve the features of the fabrics even after repeated washing and use. Peptides are well tolerated by the human body and do not induce resistance in bacteria. Materials and Methods: A commercially available cotton tissue (specific weight of 150 g/m2, 30 Tex yarn fineness, fabric density of 270/230 threads/10 cm in the warp and weft) was washed with alkali and bleached and died. A piece of this tissue was accurately weighed, washed with methanol (MeOH) and N,N-dimethylformamide (DMF), and air-dried. Upon incubation with epibromohydrin, followed by treatment with Fmoc-NH-CH2CH2-NH2 and Fmoc removal, the peptides were synthesized by incorporating one amino acid at a time, beginning with the formation of an amide bond with the free NH2 of 1,2–diaminoethane. We also linked to the fibers a few peptide dendrimers, because the mechanism of action of these peptides often requires the formation of clusters. We prepared and characterized seven peptide-cotton samples. Results: The new peptide-cotton conjugates were characterized by means of FT-IR spectroscopy and X-ray Photoelectron Spectroscopy (XPS). This latter technique allows for discriminating among different amino acids and thus different peptide-cotton samples. Some samples maintain a pretty good whiteness degree even after peptide functionalization. Interestingly, these samples also display encouraging activities against a Gram positive strain. Conclusions: Potentially antimicrobial lipopeptides can be covalently linked to cotton fabrics, step-by-step. It is also possible to build on the cotton Lys-based dendrimers. XPS is a useful technique to discriminate among different types of nitrogen. Two samples displaying some antibacterial potency did also preserve their whiteness index.

Beetles as Model Organisms in Physiological, Biomedical and Environmental Studies - A Review

Model organisms are often used in biological, medical and environmental research. Among insects, Drosophila melanogaster, Galleria mellonella, Apis mellifera, Bombyx mori, Periplaneta americana, and Locusta migratoria are often used. However, new model organisms still appear. In recent years, an increasing number of insect species has been suggested as model organisms in life sciences research due to their worldwide distribution and environmental significance, the possibility of extrapolating research studies to vertebrates and the relatively low cost of rearing. Beetles are the largest insect order, with their representative - Tribolium castaneum - being the first species with a completely sequenced genome, and seem to be emerging as new potential candidates for model organisms in various studies. Apart from T. castaneum, additional species representing various Coleoptera families, such as Nicrophorus vespilloides, Leptinotarsa decemlineata, Coccinella septempunctata, Poecilus cupreus, Tenebrio molitor and many others, have been used. They are increasingly often included in two major research aspects: biomedical and environmental studies. Biomedical studies focus mainly on unraveling mechanisms of basic life processes, such as feeding, neurotransmission or activity of the immune system, as well as on elucidating the mechanism of different diseases (neurodegenerative, cardiovascular, metabolic, or immunological) using beetles as models. Furthermore, pharmacological bioassays for testing novel biologically active substances in beetles have also been developed. It should be emphasized that beetles are a source of compounds with potential antimicrobial and anticancer activity. Environmental-based studies focus mainly on the development and testing of new potential pesticides of both chemical and natural origin. Additionally, beetles are used as food or for their valuable supplements. Different beetle families are also used as bioindicators. Another important research area using beetles as models is behavioral ecology studies, for instance, parental care. In this paper, we review the current knowledge regarding beetles as model organisms and their practical application in various fields of life science.

Antibacterial cotton fabrics based on hydrophilic amino-containing scaffolds

A hydrophilic amino compound, 4,7,10-trioxatridecane-1,13-diamine, has been utilized in several chemical and biochemical studies. Among previous applications is its use as a flexible and economical spacer molecule to increase the length between two moieties of interest, one of which may be a solid-phase interface. In this study, we immobilized this molecule on cotton fabrics and showed that this modified surface (DA) exhibited significant antibacterial activities in both Gram-negative bacteria and a Gram-positive bacterium. Studies on the structure-activity relationship revealed that additional chemical modifications on DA usually led to lowered antibacterial activities, emphasizing an importance of having free amino groups. Further investigation by fluorescence microscope indicated that this modified surface likely interfered with the membrane integrity of bacteria, leading to cell lysis. In addition, this scaffold was also tested for its biocompatibility with mouse fibroblast cells, and exerted no detrimental effect to the cell growth, highlighting its potential as a practical antibacterial surface modifier.

Non-leaching antibacterial cotton fabrics based on lipidated peptides

A new set of lipidated peptides was in situ synthesised on cotton surface, resulting in non-leaching surfaces with high antibacterial activities in Gram-negative bacteria. These surfaces were also shown to be non-toxic to mammalian cells.

An anionic defensin from Plutella xylostella with potential activity against Bacillus thuringiensis

Insect defensins, are cationic peptides that play an important role in immunity against microbial infection. In the present study, an anionic defensin from Plutella xylostella, (designated as PxDef) was first cloned and characterized. Amino acid sequence analysis showed that the mature peptide owned characteristic six-cysteine motifs with predicted isoelectric point of 5.57, indicating an anionic defensin. Quantitative real-time polymerase chain reaction analysis showed that PxDef was significantly induced in epidermis, fat body, midgut and hemocytes after injection of heat-inactivated Bacillus thuringiensis, while such an induction was delayed by the injection of live B. thuringiensis in the 4th instar larvae of P. xylostella. Knocking down the expression of nuclear transcription factor Dorsal in P. xylostella by RNA interference significantly decreased the mRNA level of PxDef, and increased the sensitivity of P. xylostella larvae to the infection by live B. thuringiensis. The purified recombinant mature peptide (PxDef) showed higher activity against Gram-positive bacteria, with the minimum inhibition concentrations of 1.6 and 2.6 µM against B. thuringiensis and Bacillus subtilis, respectively. To our knowledge, this is the first report about an anionic PxDef, which may play an important role in the immune system of P. xylostella against B. thuringiensis.

High-density antimicrobial peptide coating with broad activity and low cytotoxicity against human cells

Medical device-associated infections are a multi-billion dollar burden for the worldwide healthcare systems. The modification of medical devices with non-leaching coatings capable of killing microorganisms on contact is one of the strategies being investigated to prevent microorganism colonization. Here we developed a robust antimicrobial coating based on the chemical immobilization of the antimicrobial peptide (AMP), cecropin-melittin (CM), on gold nanoparticles coated surfaces. The concentration of AMP immobilized (110 μg/cm(2)) was higher than most of the studies reported so far (<10 μg/cm(2)). This translated onto a coating with high antimicrobial activity against Gram positive and negative bacteria sp., as well as multi-drug resistant bacteria. Studies with E. coli reporter bacteria showed that these coatings induced the permeability of the outer membrane of bacteria in less than 5 min and the inner membrane in approximately 20 min. Importantly, the antimicrobial properties of the coating are maintained in the presence of 20% (v/v) human serum, and have low probability to induce bacteria resistance. We further show that coatings have low toxicity against human endothelial and fibroblast cells and is hemocompatible since it does not induce platelet and complement activation. The antimicrobial coating described here may be promising to prevent medical device-associated infections.

STATEMENT OF SIGNIFICANCE

In recent years, antimicrobial peptides (AMPs) have been chemically immobilized on surfaces of medical devices to render them with antimicrobial properties. Surfaces having immobilized cationic peptides are susceptible to be adsorbed by plasma proteins with the subsequent loss of antimicrobial activity. Furthermore, with the exception of very few studies that have determined the cytotoxicity of surfaces in mammalian cells, the effect of the immobilized AMP on human cells is relatively unknown. Here we report a coating based on cecropin-melittin peptide (CM) that maintains its antimicrobial activity against Gram-positive and negative bacteria including multi-drugs resistance bacteria in the presence of serum and has relatively low cytotoxicity against human cells. The reported coatings may be translated on to variety of substrates (glass and titanium) and medical devices to prevent device-associated microbial infection.

Antimicrobial regenerated cellulose/nano-silver fiber without leaching

The formation of antimicrobial regenerated cellulose fibers using an ionic liquid solvent, 1-butyl-3-methylimidazolium chloride, and silver nanoparticles was studied. The cellulose preparation and dispersion efficiency of the silver nanoparticles in the solvent were evaluated via scanning electron microscope and transmission electron microscopy in terms of different processing conditions. The influence of silver nanoparticles on regenerated cellulose fiber crystallization and strength was examined using a wide angle X-ray diffractometry and tensiometry, respectively. The bioactive efficacy of the cellulose/nano-silver fiber was tested in accordance with the standard method of ASTM E 2149-10. The cellulose/nano-silver fibers were bioactive and killed Escherichia coli almost completely without any leaching problems. The addition of nano-silver significantly increased the cellulose fiber tensile strength and modulus with an insignificant reduction in fiber elongation, and a slower thermal decomposition rate, evidenced by increased fiber crystallinity. Higher processing temperatures improved the nano-silver dispersion efficiency. The final nano-silver suspension in the regenerated cellulose matrix was composed of scattered clusters with an average size of 700 nm and a distribution density of 14,098 mm−2.

A simple approach to constructing antibacterial and anti-biofouling nanofibrous membranes

In this work, antibacterial and anti-adhesive polymeric thin films were constructed on polyacrylonitrile (PAN) nanofibrous membranes in order to extend their applications. Polyhexamethylene guanidine hydrochloride (PHGH) as an antibacterial agent and heparin (HP) as an anti-adhesive agent have been successfully coated onto the membranes via a layer-by-layer (LBL) assembly technique confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The antibacterial properties of LBL-functionalized PAN nanofibrous membranes were evaluated using the Gram-positive bacterium Staphylococcus aureus and the Gram-negative Escherichia coli. Furthermore, the dependence of the antibacterial activity and anti-biofouling performance on the number of layers in the LBL films was investigated quantitatively. It was found that these LBL-modified nanofibrous membranes possessed high antibacterial activities, easy-cleaning properties and stability under physiological conditions, thus qualifying them as candidates for anti-biofouling coatings.