Water-Stable All-Biodegradable Microparticles in Nanofibers by Electrospinning of Aqueous Dispersions for Biotechnical Plant Protection

Design of Polymer Carriers for Optimized Pheromone Release in Sustainable Insect Control Strategies

Semiochemicals such as pheromones play a major role in communication between insects, influencing their spatial orientation, aggregation, defense, and mating. The rational chemical design of precision pheromone-releasing materials are increased the efficiency of pheromone-based plant protection agents. Decades of research is begun to unravel the complex communication structures regulated by semiochemicals, from the neuronal perception of specific chemical substances to the behavioral responses in hundreds of species, including many devastating pest insects. This article summarizes the most effective uses of semiochemicals in agriculture, the behavioral responses of selected target species, and controlled-release strategies based on formulations such as novel fibrous polymer carriers. This study helps scientists, decision-makers, farmers, and the public understand the importance of appropriate mating disruption techniques that reduce the need for broad-spectrum insecticides and limit their impact on non-target and beneficial insects.

Biodegradable electrospun fibers as sustained-release carriers of insect pheromones for field trapping of Spodoptera litura (Lepidoptera: Noctuidae)

BACKGROUND

Insect pheromones are highly effective and environmentally friendly, and are widely used in the monitoring and trapping of pests. However, many researchers have found that various factors such as ultraviolet light and temperature in the field environment can accelerate the volatilization of pheromones, thus affecting the actual control effect. In recent years, electrospinning technology has demonstrated remarkable potential in the preparation of sustained carriers. Moreover, the utilization of biodegradable materials in electrospinning presents a promising avenue for the advancement of eco-friendly carriers.

RESULTS

In this study, homogeneous and defect-free pheromone carriers were obtained by electrospinning using fully biodegradable polyhydroxybutyrate materials and pheromones of Spodoptera litura. The electrospun fibers with porous structure could continuously release pheromone (the longest can be ≤80 days). They also had low light transmission, hydrophobic protection. More importantly, the pheromone-loaded electrospun fiber carriers showed stable release and good trapping effect in the field. They could trap pests for at least 7 weeks in the field environment without other light stabilizers added.

CONCLUSION

Sustained-release carriers constructed by electrospinning and green materials could improve the efficacy of pheromones and ensure environmental friendliness, and provided a tool for the management of S. litura and other pests and sustainable development of agricultural. © 2023 Society of Chemical Industry.

Polymer Colloids: Current Challenges, Emerging Applications, and New Developments

Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

Nanotechnology: recent advances in viticulture and enology

Nowadays, nanoscience is a leading modern science that has a major impact on the food, pharmaceutical, and agriculture sectors. Several nanomaterials show a great potential for use during vine growing and winemaking processes. In viticulture, nanotechnology can be applied to protect vines against phytopathogens and to improve grape yield and quality. Thus, nanotechnology may allow the use of lesser amounts of phytochemical compounds, reducing environmental impact and promoting a more sustainable agriculture. And in winemaking, nanomaterials and nanodevices can be used to control the growth of spoilage microorganisms and to reduce or remove undesirable compounds, such as ethyl phenols (4-ethylphenol and 4-ethylguaiacol), biogenic amines, and tartaric acid, and so on, as well as to facilitate some technological processes (i.e. in wine filtration to eliminate microorganisms). This review summarizes recent studies with applications of nanotechnology in viticulture in order to facilitate agronomic management and optimize grape production and in enology to improve wine quality and safety. © 2021 Society of Chemical Industry.

Green Electrospinning of Polymer Latexes: A Systematic Study of the Effect of Latex Properties on Fiber Morphology

Green electrospinning is a relatively new promising technology in which a polymer (latex) can be spun from an aqueous dispersion with the help of a template polymer. This method is a green, clean and safe technology that is able to spin hydrophobic polymers using water as an electrospinning medium. In this article, a systematic study that investigates the influence of the template polymer molar mass, the total solids content of the initial dispersion and the particle/template ratio is presented. Furthermore, the influence of the surfactant used to stabilize the polymer particles, the surface functionality of the polymer particles and the use of a bimodal particle size distribution on the final fiber morphology is studied for the first time. In green electrospinning, the viscosity of the initial complex blend depends on the amount and molar mass of the template polymer but also on the total solids content of the dispersion to be spun. Thus, both parameters must be carefully taken into account in order to fine-tune the final fiber morphology. Additionally, the particle packing and the surface chemistry of the polymer particles also play an important role in the obtained nanofibers quality.

pH-Responsive Nanofibers for Precise and Sequential Delivery of Multiple Payloads

Effective combination therapies can be achieved by programming materials for controlling release sequence, timing, and dose of multiple payloads. Herein, we synthesize dextran esters by coesterification of dextran, which display responsive properties at a precise pH threshold between 5.0 and 7.0. Multilayers electrospun nanofibers are prepared so that three different payloads are entrapped in three different dextran esters. The release of the three drugs can be sequentially and independently activated by a gradual increase of pH value. Because both pH threshold and release kinetics are matching conditions encountered by aliments along the gastrointestinal tract, these dextran ester multilayer nanofibers are promising for oral drug delivery.

Emulsion Electrospinning of Polytetrafluoroethylene (PTFE) Nanofibrous Membranes for High-Performance Triboelectric Nanogenerators

Electrospinning is a simple, versatile technique for fabricating fibrous nanomaterials with the desirable features of extremely high porosities and large surface areas. Using emulsion electrospinning, polytetrafluoroethylene/polyethene oxide (PTFE/PEO) membranes were fabricated, followed by a sintering process to obtain pure PTFE fibrous membranes, which were further utilized against a polyamide 6 (PA6) membrane for vertical contact-mode triboelectric nanogenerators (TENGs). Electrostatic force microscopy (EFM) measurements of the sintered electrospun PTFE membranes revealed the presence of both positive and negative surface charges owing to the transfer of positive charge from PEO which was further corroborated by FTIR measurements. To enhance the ensuing triboelectric surface charge, a facile negative charge-injection process was carried out onto the electrospun (ES) PTFE subsequently. The fabricated TENG gave a stabilized peak-to-peak open-circuit voltage (V_oc) of up to ∼900 V, a short-circuit current density (J_sc) of ∼20 mA m^-2, and a corresponding charge density of ∼149 μC m^-2, which are ∼12, 14, and 11 times higher than the corresponding values prior to the ion-injection treatment. This increase in the surface charge density is caused by the inversion of positive surface charges with the simultaneous increase in the negative surface charge on the PTFE surface, which was confirmed by using EFM measurements. The negative charge injection led to an enhanced power output density of ∼9 W m^-2 with high stability as confirmed from the continuous operation of the ion-injected PTFE/PA6 TENG for 30 000 operation cycles, without any significant reduction in the output. The work thus introduces a relatively simple, cost-effective, and environmentally friendly technique for fabricating fibrous fluoropolymer polymer membranes with high thermal/chemical resistance in TENG field and a direct ion-injection method which is able to dramatically improve the surface negative charge density of the PTFE fibrous membranes.

Encoding materials for programming a temporal sequence of actions

Materials are usually synthesized to allow a function that is either independent of time or that can be triggered in a specific environment.

Sequence-Controlled Delivery of Peptides from Hierarchically Structured Nanomaterials

Peptide drugs delivered orally need to be protected from degradation for achieving their functions. To fulfill the complicated task of oral drug delivery, we present a hierarchically structured drug-delivery system that can undertake structural changes, so multiple functions can be triggered by a sequence of stimuli. Such hierarchical system is achieved in a nanoparticle-in-nanofiber configuration, in which both the nanofibers and the nanoparticles are pH-responsive and biocompatible. A model peptide is efficiently encapsulated under mild condition, and the nanocarriers are further electrospun with a pH-responsive mucoadhesive polymer. The nanoparticles are released from the nanofibers, and thereafter the peptides are released from the nanoparticles in a pH-responsive manner. The nanoparticles are compatible with caco-2 cells, and the endocytosis of the nanoparticles is described in detail.

Electrospun nanofibres in agriculture and the food industry: a review

The interesting characteristics of electrospun nanofibres, such as high surface-to-volume ratio, nanoporosity, and high safety, make them suitable candidates for use in a variety of applications. In the recent decade, electrospun nanofibres have been applied to different potential fields such as filtration, wound dressing, drug delivery, etc. and a significant number of review papers have been published in these fields. However, the use of electrospun nanofibres in agriculture is comparatively novel and is still in its infancy. In this paper, the specific applications of electrospun nanofibres in agriculture and food science, including plant protection using pheromone-loaded nanofibres, plant protection using encapsulation of biocontrol agents, preparation of protective clothes for farm workers, encapsulation of agrochemical materials, deoxyribonucleic acid extraction in agricultural research studies, pre-concentration and measurement of pesticides in crops and environmental samples, preparation of nanobiosensors for pesticide detection, encapsulation of food materials, fabrication of food packaging materials, and filtration of beverage products are reviewed and discussed. This paper may help researchers develop the use of electrospun nanofibres in agriculture and food science to address some serious problems such as the intensive use of pesticides. © 2016 Society of Chemical Industry.

Protection of Vine Plants against Esca Disease by Breathable Electrospun Antifungal Nonwovens

The harmful Esca disease in vine plants caused by wood-inhabiting fungi including Phaeomoniella chlamydospora (Pch) is spreading all across the world. This disease leads to poor vine crops and a slow decline or to a sudden dieback of the vine plants. The pruning wounds of vine plants are the main entry point for Pch. While model experiments with aerosol particles recommend electrospun nonwovens as a suitable barrier to block Pch, tests with living spores show clearly that only electrospun fibrous nonwovens do not prevent Pch invasion. However it is found, that with antifungal additives electrospun nonwovens could be applied successfully for blocking of Pch to infect the substrate. Thereby, a highly useful concept for the protection of vine plants against Esca disease is provided which could also serve as a concept for related plant diseases.

Mechanical properties and chemical resistance of electrospun polyterafluoroethylene fibres

A very small addition of PEO during electrospinning led to fibrous PTFE membranes with excellent mechanical properties and chemical resistance.

All Organic Nanofibers As Ultralight Versatile Support for Triplet-Triplet Annihilation Upconversion

We present a method for the fabrication of ultralight upconverting mats consisting of rigid polymer nanofibers. The mats are prepared by simultaneously electrospinning an aqueous solution of a polymer with pronounced oxygen-barrier properties and functional nanocapsules containing a sensitizer/emitter couple optimized for triplet-triplet annihilation photon upconversion. The optical functionality of the nanocapsules is preserved during the electrospinning process. The nanofibers demonstrate efficient upconversion fluorescence centered at λ_max = 550 nm under low intensity excitation with a continuous wave laser (λ = 635 nm, power = 5 mW). The pronounced oxygen-barrier property of the polymer matrix may efficiently prevent the oxygen penetration so upconversion fluorescence is registered in ambient atmosphere. The demonstrated method can be used for the production of upconverting ultralight porous coatings for sensors or upconverting membranes with freely variable thickness for solar cells.