Biomimetic poly(ethylene glycol)-based hydrogels as scaffolds for inducing endothelial adhesion and capillary-like network formation

Advances in hydrogel-based vascularized tissues for tissue repair and drug screening

The construction of biomimetic vasculatures within the artificial tissue models or organs is highly required for conveying nutrients, oxygen, and waste products, for improving the survival of engineered tissues in vitro. In recent times, the remarkable progress in utilizing hydrogels and understanding vascular biology have enabled the creation of three-dimensional (3D) tissues and organs composed of highly complex vascular systems. In this review, we give an emphasis on the utilization of hydrogels and their advantages in the vascularization of tissues. Initially, the significance of vascular elements and the regeneration mechanisms of vascularization, including angiogenesis and vasculogenesis, are briefly introduced. Further, we highlight the importance and advantages of hydrogels as artificial microenvironments in fabricating vascularized tissues or organs, in terms of tunable physical properties, high similarity in physiological environments, and alternative shaping mechanisms, among others. Furthermore, we discuss the utilization of such hydrogels-based vascularized tissues in various applications, including tissue regeneration, drug screening, and organ-on-chips. Finally, we put forward the key challenges, including multifunctionalities of hydrogels, selection of suitable cell phenotype, sophisticated engineering techniques, and clinical translation behind the development of the tissues with complex vasculatures towards their future development.

Meniscus cell regional phenotypes: Dedifferentiation and reversal by biomaterial embedding

Meniscus injuries are common and a major cause of long-term joint degeneration and disability. Current treatment options are limited, so novel regenerative therapies or tissue engineering strategies are urgently needed. The development of new therapies is hindered by a lack of knowledge regarding the cellular biology of the meniscus and a lack of well-established methods for studying meniscus cells in vitro. The goals of this study were to (1) establish baseline expression profiles and dedifferentiation patterns of inner and outer zone primary meniscus cells, and (2) evaluate the utility of poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacrylate (GelMA) polymer hydrogels to reverse dedifferentiation trends for long-term meniscus cell culture. Using reverse transcription-quantitative polymerase chain reaction, we measured expression levels of putative meniscus phenotype marker genes in freshly isolated meniscus tissue, tissue explant culture, and monolayer culture of inner and outer zone meniscus cells from porcine knees to establish baseline dedifferentiation characteristics, and then compared these expression levels to PEGDA/GelMA embedded passaged meniscus cells. COL1A1 showed robust upregulation, while CHAD, CILP, and COMP showed downregulation with monolayer culture. Expression levels of COL2A1, ACAN, and SOX9 were surprisingly similar between inner and outer zone tissue and were found to be less sensitive as markers of dedifferentiation. When embedded in PEGDA/GelMA hydrogels, expression levels of meniscus cell phenotype genes were significantly modulated by varying the ratio of polymer components, allowing these materials to be tuned for phenotype restoration, meniscus cell culture, and tissue engineering applications.

Minimally invasive co-injection of modular micro-muscular and micro-vascular tissues improves in situ skeletal muscle regeneration

Various conventional treatment strategies for volumetric muscle loss (VML) are often hampered by the extreme donor site morbidity, the limited availability of quality muscle flaps, and complicated, as well as invasive surgical procedures. The conventional biomaterial-based scaffolding systems carrying myoblasts have been extensively investigated towards improving the regeneration of the injured muscle tissues, as well as their injectable forms. However, the applicability of such designed systems has been restricted due to the lack of available vascular networks. Considering these facts, here we present the development of a unique set of two minimally invasively injectable modular microtissues, consisting of mouse myoblast (C2C12)-laden poly(lactic-co-glycolic acid) porous microspheres (PLGA PMs), or the micro-muscles, and human umbilical vein endothelial cell (HUVEC)-laden poly(ethylene glycol) hollow microrods (PEG HMs), or the microvessels. Besides systematic in vitro investigations, the myogenic performance of these modular composite microtissues, when co-injected, was explored in vivo using a mouse VML model, which confirmed improved in situ muscle regeneration and remolding. Together, we believe that the construction of these injectable modular microtissues and their combination for minimally invasive therapy provides a promising method for in situ tissue healing.

Mechanochemical Cellular Membrane Internalization of Nanohydrogels: A Large-Scale Mesoscopic Simulation

By combining large-scale dissipative particle dynamics and steered molecular dynamics simulations, we investigate the mechanochemical cellular internalization pathways of homogeneous and heterogeneous nanohydrogels and demonstrate that membrane internalization is determined by the crosslink density and encapsulation ability of nanohydrogels. The homogeneous nanohydrogels with a high crosslink density and low encapsulation ability behave as soft nanoparticles partially wrapped by the membrane, while those with a low crosslink density and high encapsulation ability permeate into the membrane. Regardless of the crosslink density, the homogeneous nanohydrogels undergo typical dual morphological deformations. The local lipid nanodomains are identified at the contacting region between the membrane and nanohydrogels because of different diffusion behaviors between lipid and receptor molecules during the internalization process. The yolk@shell heterogeneous nanohydrogels present a different mechanochemical cellular internalization pathway. The yolk with strong affinity is directly in contact with the membrane, resulting in partial membrane wrapping, and the contacting area is much reduced when compared to homogenous nanohydrogels, leading to a smaller lipid nanodomain and thus avoiding related cellular toxicity. Our findings provide a critical mechanism understanding of the biological pathways of nanohydrogels and may guide the molecular design of the hydrogel-based materials for controlled release drug delivery, tissue engineering, and cell culture.

Engineered Collagen Matrices

Collagen is the most abundant protein in mammals, accounting for approximately one-third of the total protein in the human body. Thus, it is a logical choice for the creation of biomimetic environments, and there is a long history of using collagen matrices for various tissue engineering applications. However, from a biomaterial perspective, the use of collagen-only scaffolds is associated with many challenges. Namely, the mechanical properties of collagen matrices can be difficult to tune across a wide range of values, and collagen itself is not highly amenable to direct chemical modification without affecting its architecture or bioactivity. Thus, many approaches have been pursued to design scaffold environments that display critical features of collagen but enable improved tunability of physical and biological characteristics. This paper provides a brief overview of approaches that have been employed to create such engineered collagen matrices. Specifically, these approaches include blending of collagen with other natural or synthetic polymers, chemical modifications of denatured collagen, de novo creation of collagen-mimetic chains, and reductionist methods to incorporate collagen moieties into other materials. These advancements in the creation of tunable, engineered collagen matrices will continue to enable the interrogation of novel and increasingly complex biological questions.

Robust Hybrid Hydrophilic Coating on a High-Density Polyethylene Surface with Enhanced Mechanical Property

Acoustic aeration on a sonochemical surface could have a major impact on sensitivity because of the serious reflection/scattering of sound waves. Recently, we found that the trapped air in the crevices can be reduced by covering the surface with a hydrophilic coating, thus preventing the bubble formation upon ultrasound agitation. Here, we developed an epoxy-based hybrid polymer coating that shows greatly enhanced mechanical adhesion on a high-density polyethylene (HDPE) surface. The strong bonding of C-O-C and the benzene ring as the backbone ensures excellent mechanical strength, and the hydrophilic polar groups of -OH/-NH₂ on dopamine display bubble suppression. The existing -OH groups in the cross-linked matrix, which is constructed by adding the monomer PEGMA and cross-linker PEGDA, form a strong chemical bond with the HDPE surface via dehydration, which largely enhanced the adhesion force. The coated HDPE surface maintained a low contact angle of less than 45°, which is the critical angle for avoiding bubbles, after a long period period of abrasion cycling of 160 times under 9.8 kPa pressure. The coated HDPE surface displayed excellent bubble removal performance under ultrasound agitation from room temperature to 60 °C. The strengthened mechanical adhesion of the epoxy-based hydrophilic coating displays extensive applications on a variety of surfaces for acoustic bubble removal.

Applications of decellularized materials in tissue engineering: advantages, drawbacks and current improvements, and future perspectives

Decellularized materials (DMs) are attracting more and more attention in tissue engineering because of their many unique advantages, and they could be further improved in some aspects through various means.

Customizable biomaterials as tools for advanced anti-angiogenic drug discovery

The inhibition of angiogenesis is a critical element of cancer therapy, as cancer vasculature contributes to tumor expansion. While numerous drugs have proven to be effective at disrupting cancer vasculature, patient survival has not significantly improved as a result of anti-angiogenic drug treatment. Emerging evidence suggests that this is due to a combination of unintended side effects resulting from the application of anti-angiogenic compounds, including angiogenic rebound after treatment and the activation of metastasis in the tumor. There is currently a need to better understand the far-reaching effects of anti-angiogenic drug treatments in the context of cancer. Numerous innovations and discoveries in biomaterials design and tissue engineering techniques are providing investigators with tools to develop physiologically relevant vascular models and gain insights into the holistic impact of drug treatments on tumors. This review examines recent advances in the design of pro-angiogenic biomaterials, specifically in controlling integrin-mediated cell adhesion, growth factor signaling, mechanical properties and oxygen tension, as well as the implementation of pro-angiogenic materials into sophisticated co-culture models of cancer vasculature.

Hyaluronic Acid and Polyethylene Glycol Hybrid Hydrogel Encapsulating Nanogel with Hemostasis and Sustainable Antibacterial Property for Wound Healing

Immediate hemorrhage control and anti-infection play important roles in the wound management. Besides, a moist environment is also beneficial for wound healing. Hydrogels are promising materials in urgent hemostasis and drug release. However, hydrogels have the disadvantage of rapid release profiles, leading to the exposure to high drug concentrations. In this study, we constructed hybrid hydrogels with rapid hemostasis and sustainable antibacterial property combining aminoethyl methacrylate hyaluronic acid (HA-AEMA) and methacrylated methoxy polyethylene glycol (mPEG-MA) hybrid hydrogels and chlorhexidine diacetate (CHX)-loaded nanogels. The CHX-loaded nanogels (CLNs) were prepared by the enzyme degradation of CHX-loaded lysine-based hydrogels. The HA-AEMA and mPEG-MA hybrid hydrogel loaded with CLNs (labeled as Gel@CLN) displayed a three-dimensional microporous structure and exhibited excellent swelling, mechanical property, and low cytotoxicity. The Gel@CLN hydrogel showed a prolonged release period of CHX over 240 h and the antibacterial property over 10 days. The hemostasis and wound-healing properties were evaluated in vivo using a mouse model. The results showed that hydrogel had the rapid hemostasis capacity and accelerated wound healing. In summary, CLN-loaded hydrogels may be excellent candidates as hemostasis and anti-infection materials for the wound dressing application.

Gellan Gum Hydrogels with Enzyme-Sensitive Biodegradation and Endothelial Cell Biorecognition Sites

The survival of a biomaterial or tissue engineered construct is mainly hampered by the deficient microcirculation in its core, and limited nutrients and oxygen availability to the implanted or colonizing host cells. Aiming to address these issues, we herein propose bioresponsive gellan gum (GG) hydrogels that are biodegradable by metalloproteinase 1 (MMP-1) and enable endothelial cells adhesion and proliferation. GG is chemically functionalized with divinyl sulfone (DVS) and then biofunctionalized with thiol cell-adhesive peptides (T1 or C16) to confer GG endothelial cell biorecognition cues. Biodegradable hydrogels are then formed by Michael type addition of GGDVS or/and peptide-functionalized GGDVS with a dithiol peptide crosslinker sensitive to MMP-1. The mechanical properties (6 to 5580 Pa), swelling (17 to 11), MMP-1-driven degradation (up to 70%), and molecules diffusion coefficients of hydrogels are tuned by increasing the polymer amount and crosslinking density. Human umbilical cord vein endothelial cells depict a polarized elongated morphology when encapsulated within T1-containing hydrogels, in contrast to the round morphology observed in C16-containing hydrogels. Cell organization is favored as early as 1 d of cell culture within the T1-modified hydrogels with higher concentration of peptide, while cell proliferation is higher in T1-modified hydrogels with higher modulus. In conclusion, biodegradable and bioresponsive GGDVS hydrogels are promising endothelial cell responsive materials that can be used for vascularization strategies.

Improved Human Bone Marrow Mesenchymal Stem Cell Osteogenesis in 3D Bioprinted Tissue Scaffolds with Low Intensity Pulsed Ultrasound Stimulation

3D printing and ultrasound techniques are showing great promise in the evolution of human musculoskeletal tissue repair and regeneration medicine. The uniqueness of the present study was to combine low intensity pulsed ultrasound (LIPUS) and advanced 3D printing techniques to synergistically improve growth and osteogenic differentiation of human mesenchymal stem cells (MSC). Specifically, polyethylene glycol diacrylate bioinks containing cell adhesive Arginine-Glycine-Aspartic acid-Serene (RGDS) peptide and/or nanocrystalline hydroxyapatite (nHA) were used to fabricate 3D scaffolds with different geometric patterns via novel table-top stereolithography 3D printer. The resultant scaffolds provide a highly porous and interconnected 3D environment to support cell proliferation. Scaffolds with small square pores were determined to be the optimal geometric pattern for MSC attachment and growth. The optimal LIPUS working parameters were determined to be 1.5 MHz, 20% duty cycle with 150 mW/cm(2) intensity. Results demonstrated that RGDS peptide and nHA containing 3D printed scaffolds under LIPUS treatment can greatly promote MSC proliferation, alkaline phosphatase activity, calcium deposition and total protein content. These results illustrate the effectiveness of the combination of LIPUS and biomimetic 3D printing scaffolds as a valuable combinatorial tool for improved MSC function, thus make them promising for future clinical and various regenerative medicine application.

Promotion of adhesion and proliferation of endothelial progenitor cells on decellularized valves by covalent incorporation of RGD peptide and VEGF

Tissue engineered heart valve is a promising alternative to current heart valve surgery, for its capability of growth, repair, and remodeling. However, extensive development is needed to ensure tissue compatibility, durability and antithrombotic potential. This study aims to investigate the biological effects of multi-signal composite material of polyethyl glycol-cross-linked decellularized valve on adhesion and proliferation of endothelial progenitor cells. Group A to E was decellularized valve leaflets, composite material of polyethyl glycol-cross-linked decellularized valves leaflets, vascular endothelial growth factor-composite materials, Arg-Gly-Asp peptide-composite materials and multi-signal modified materials of polyethyl glycol-cross-linked decellularized valve leaflets, respectively. The endothelial progenitor cells were seeded for each group, cell adhesion and proliferation were detected and neo-endothelium antithrombotic function of the multi-signal composite materials was evaluated. At 2, 4, and 8 h after the seeding, the cell numbers and 3H-TdR incorporation in group D were the highest. At 2, 4, and 8 days after the seeding, the cell numbers and 3H-TdR incorporation were significantly higher in groups C, D, and E compared with groups A and B (P < 0.05) and cell numbers and the expression of t-PA and eons in the neo-endothelium were quite similar to those in the human umbilical vein endothelial cells at 2, 4, and 8 days after the seeding. The Arg-Gly-Asp- peptides (a sequential peptide composed of arginine (Arg), glycine (Gly) and aspartic acid (Asp)) and VEGF-conjugated onto the composite material of PEG-crosslinked decellularized valve leaflets synergistically promoted the adhesion and proliferation of endothelial progenitor cells on the composite material, which may help in tissue engineering of heart valves.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Functionalised type-I collagen as a hydrogel building block for bio-orthogonal tissue engineering applications

Modulating the hydrogel properties from injectable to implantable scaffolds using the bio-orthogonal thiol-Michael addition click reaction.

Promoting endothelialization on decellularized porcine aortic valve by immobilizing branched polyethylene glycolmodified with cyclic-RGD peptide: an in vitro study

We functionally modify a decellularized porcine aortic valve using a novel complex biologically active cyclic- (c)-RGD modified with branched polyethylene glycol (PEG), namely, c-RDG-PEG. Human umbilical vein endothelial cell (HUVEC) adhesion and proliferation were detected for up to 8 d after seeding on the scaffold. (1)H nuclear magnetic resonance (D2O) showed signal peaks at 7.27 and 7.38 ppm associated with protons of the phenyl group in c-RGD-PEG. Attenuated total reflectance Fourier transform infrared spectroscopy showed characteristic peaks for PEG at 1100 and 1342 cm(-1). These represented vibration peaks of C-O and -CH2 bonds, suggesting successful grafting of c-RGD-PEG to a decellularized porcine aortic valve (DPAV). The tensile strengths were significantly increased in the c-RGD-PEG-DPAV group compared to the native valve and DPAV groups (P < 0.05), while the elastic modulus was sigficantly decreased in the c-RGD-PEG-DPAV group compared to the native valve and DPAV groups (P < 0.05). HUVEC proliferation was significantly higher in the c-RGD-PEG-DPAV group than in the PEG-DPAV and DPAV groups (P < 0.01). Maximum adhesion occurred at 4 h, and on the 8th day, a confluent and compact monolayer formed on the valve surface. The modified DPAV resulted in good adhesion and proliferation of endothelial cells and is an appropriate approach to modify tissue engineered heart valves for promoting endothelialization.

RoY peptide-modified chitosan-based hydrogel to improve angiogenesis and cardiac repair under hypoxia

Myocardial infarction (MI) still represents the "Number One Killer" in the world. The lack of functional vasculature of the infracted myocardium under hypoxia is one of the main problems for cardiac repair. In this study, a thermosensitive chitosan chloride-RoY (CSCl-RoY) hydrogel was developed to improve angiogenesis under hypoxia after MI. First, RoY peptides were conjugated onto the CSCl chain via amide linkages, and our data show that the conjugation of RoY peptide to CSCl does not interfere with the temperature sensitivity. Then, the effect of CSCl-RoY hydrogels on vascularization in vitro under hypoxia was investigated using human umbilical vein endothelial cells (HUVECs). Results show that CSCl-RoY hydrogels can promote the survival, proliferation, migration and tube formation of HUVECs under hypoxia compared with CSCl hydrogel. Further investigations suggest that CSCl-RoY hydrogels can modulate the expression of membrane surface GRP78 receptor of HUVECs under hypoxia and then activate Akt and ERK1/2 signaling pathways related to cell survival/proliferation, thereby enhancing angiogenic activity of HUVECs under hypoxia. To assess its therapeutic properties in vivo, a MI model was induced in rats by the left anterior descending artery ligation. CSCl or CSCl-RoY hydrogels were injected into the border of infracted hearts. The results demonstrate that the introduction of RoY peptide can not only improve angiogenesis at MI region but also improve the cardiac functions. Overall, we conclude that the CSCl-RoY may represent an ideal scaffold material for injectable cardiac tissue engineering.

Extracellular-matrix-based and Arg-Gly-Asp-modified photopolymerizing hydrogels for cartilage tissue engineering

Articular cartilage damage is a persistent and increasing problem with the aging population. Strategies to achieve complete repair or functional restoration remain a challenge. Photopolymerizing-based hydrogels have long received an attention in the cartilage tissue engineering, due to their unique bioactivities, flexible method of synthesis, range of constituents, and desirable physical characteristics. In the present study, we have introduced unique bioactivity within the photopolymerizing-based hydrogels by copolymerizing polyethylene glycol (PEG) macromers with methacrylated extracellular matrix (ECM) molecules (hyaluronic acid and chondroitin sulfate [CS]) and integrin binding peptides (RGD peptide). Results indicate that cellular morphology, as observed by the actin cytoskeleton structures, was strongly dependent on the type of ECM component as well as the presence of integrin binding moieties. Further, CS-based hydrogel with integrin binding RGD moieties increased the lubricin (or known as superficial zone protein [SZP]) gene expression of the encapsulated chondrocytes. Additionally, CS-based hydrogel displayed cell-responsive degradation and resulted in increased DNA, GAG, and collagen accumulation compared with other hydrogels. This study demonstrates that integrin-mediated interactions within CS microenvironment provide an optimal hydrogel scaffold for cartilage tissue engineering application.

A genetically modified protein-based hydrogel for 3D culture of AD293 cells

Hydrogels have strong application prospects for drug delivery, tissue engineering and cell therapy because of their excellent biocompatibility and abundant availability as scaffolds for drugs and cells. In this study, we created hybrid hydrogels based on a genetically modified tax interactive protein-1 (TIP1) by introducing two or four cysteine residues in the primary structure of TIP1. The introduced cysteine residues were crosslinked with a four-armed poly (ethylene glycol) having their arm ends capped with maleimide residues (4-armed-PEG-Mal) to form hydrogels. In one form of the genetically modification, we incorporated a peptide sequence ‘GRGDSP’ to introduce bioactivity to the protein, and the resultant hydrogel could provide an excellent environment for a three dimensional cell culture of AD293 cells. The AD293 cells continued to divide and displayed a polyhedron or spindle-shape during the 3-day culture period. Besides, AD293 cells could be easily separated from the cell-gel constructs for future large-scale culture after being cultured for 3 days and treating hydrogel with trypsinase. This work significantly expands the toolbox of recombinant proteins for hydrogel formation, and we believe that our hydrogel will be of considerable interest to those working in cell therapy and controlled drug delivery.

Biomimetic-engineered poly (ethylene glycol) hydrogel for smooth muscle cell migration

We report on a biomimetic scaffold as a model system to evaluate smooth muscle cell (SMC) migration in three dimensions. To accomplish this, bio-inert poly (ethylene glycol) (PEG)-based hydrogels were designed as the scaffold substrate. To mimic properties of the extracellular matrix, cell-adhesive peptide (GRGDSP) derived from fibronectin and collagenase-sensitive peptide (GPQGIAGQ) derived from collagen type I were incorporated into the PEG macromer chain. Copolymerization of the biomimetic macromers results in the formation of bioactive PEG hydrogels with cell adhesivity and biodegradability. By utilizing these biomimetic scaffolds, we studied the effect of adhesive ligand concentration, proteolysis, and network cross-linking density on cell migration. Our results showed that three-dimensional SMC migration has a biphasic dependence on adhesive ligand density, and both adhesive and collagenase-sensitive peptides were required for cell migration to occur. Furthermore, network cross-linking density was shown to dramatically influence the behavior of cell migration in the hydrogels.

Bioresponsive hydrogel scaffolding systems for 3D constructions in tissue engineering and regenerative medicine

Among the diversity of scaffolding systems available, hydrogel remains a popular choice for tissue engineering applications. The current state-of-the-art bioresponsive hydrogels demand intricate designs in pursuit of acquiring desired timely responses, such as controlled release of biological factors, changes in mechanical properties and scaffold degradation, at the same rate as the natural extracellular matrix. In this review, a variety of bioresponsive hydrogels are discussed; in particular, bioactive and biodegradable hydrogels that facilitate cellular development and tissue morphogenesis are highlighted. Bioactive hydrogels are designed to deliver biomolecules such as cell-adhesive moieties and instructive ligands at close proximity to the cell for better uptake or exposure. Biodegradable hydrogels provide transient scaffolding support for therapeutic cell settlement while gradually degrading in response to physical or enzymatic stimuli. In addition, biomechanical stimuli from hydrogels can induce mutual constructive responses on cells and, hence, will also be covered in this review.

Protein-hydrogel interactions in tissue engineering: mechanisms and applications

Recent advances in our understanding of the sophistication of the cellular microenvironment and the dynamics of tissue remodeling during development, disease, and regeneration have increased our appreciation of the current challenges facing tissue engineering. As this appreciation advances, we are better equipped to approach problems in the biology and therapeutics of even more complex fields, such as stem cells and cancer. To aid in these studies, as well as the established areas of tissue engineering, including cardiovascular, musculoskeletal, and neural applications, biomaterials scientists have developed an extensive array of materials with specifically designed chemical, mechanical, and biological properties. Herein, we highlight an important topic within this area of biomaterials research, protein-hydrogel interactions. Due to inherent advantages of hydrated scaffolds for soft tissue engineering as well as specialized bioactivity of proteins and peptides, this field is well-posed to tackle major needs within emerging areas of tissue engineering. We provide an overview of the major modes of interactions between hydrogels and proteins (e.g., weak forces, covalent binding, affinity binding), examples of applications within growth factor delivery and three-dimensional scaffolds, and finally future directions within the area of hydrogel-protein interactions that will advance our ability to control the cell-biomaterial interface.