Linear Poly(ethylene imine)-Based Hydrogels for Effective Binding and Release of DNA

Efficient Removal of Mercury from Wastewater Solutions by a Nitrogen-Doped Hyper-Crosslinked Polyamine

Mercury, a highly toxic metal and pollutant, poses a significant risk to human health and the environment. This study describes the synthesis of a new nitrogen-doped heteroaromatic hyper-crosslinked polyamine (HCPA) via the polycondensation of 2,6-diaminopyrazine and tris(4-formylphenyl)amine for the efficient removal of mercury ions from aqueous solutions. The HCPA polymer was characterized by solid-state 13C-NMR and FT-IR spectroscopy. A powder X-ray diffraction and thermogravimetric analysis showed that the polymer was semicrystalline in nature and stable up to 500 °C. Adsorption isotherms indicated that mercury adsorption occurred via mono- and multilayer adsorption by HCPA, as depicted by the Langmuir, Freundlich, and Redlich-Peterson isotherm models, with a maximum adsorption capacity of qm = 333.3 mg/g. Adsorption kinetic models suggested that the adsorption process was fast and effective, reaching equilibrium within 20 min. Thermodynamics of the adsorption process revealed that it was endothermic and spontaneous in nature due to the positive ΔH0 of 48 kJ/mol and negative ΔG0 values of -4.5 kJ/mol at 293 K. Wastewater treatment revealed 98% removal of mercury indicating the selective nature of HCPA. Finally, HCPA exhibited excellent performance and regeneration up to three cycles, demonstrating its great potential as an adsorbent for environmental remediation applications.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

The role of poly(2-alkyl-2-oxazoline)s in hydrogels and biofabrication

Poly(2-alkyl-2-oxazoline)s (PAOXAs) have been rapidly emerging as starting materials in the design of tissue engineering supports and for the generation of platforms for cell cultures, especially in the form of hydrogels. Thanks to their biocompatibility, chemical versatility and robustness, PAOXAs now represent a valid alternative to poly(ethylene glycol)s (PEGs) and their derivatives in these applications, and in the formulation of bioinks for three-dimensional (3D) bioprinting. In this review, we summarize the recent literature where PAOXAs have been used as main components for hydrogels and biofabrication mixtures, especially highlighting how their easily tunable composition could be exploited to fabricate multifunctional biomaterials with an extremely broad spectrum of properties.

d-Fructose-Decorated Poly(ethylene imine) for Human Breast Cancer Cell Targeting

The high affinity of GLUT5 transporter for d-fructose in breast cancer cells has been discussed intensely. In this contribution, high molar mass linear poly(ethylene imine) (LPEI) is functionalized with d-fructose moieties to combine the selectivity for the GLUT5 transporter with the delivery potential of PEI for genetic material. The four-step synthesis of a thiol-group bearing d-fructose enables the decoration of a cationic polymer backbone with d-fructose via thiol-ene photoaddition. The functionalization of LPEI is confirmed by 2D NMR techniques, elemental analysis, and size exclusion chromatography. Importantly, a d-fructose decoration of 16% renders the polymers water-soluble and eliminates the cytotoxicity of PEI in noncancer L929 cells, accompanied by a reduced unspecific cellular uptake of the genetic material. In contrast, the cytotoxicity as well as the cell specific uptake is increased for triple negative MDA-MB-231 breast cancer cells. Therefore, the introduction of d-fructose shows superior potential for cell targeting, which can be assumed to be GLUT5 dependent.

3rd generation poly(ethylene imine)s for gene delivery

In this study, a series of high molar mass poly(2-oxazoline)-based copolymers was synthesized, introducing 2-ethyl-2-oxazoline, ethylene imine, and primary amine bearing monomer units representing a new generation of PEI.

A biomimetic enzyme modified electrode for H2O2 highly sensitive detection

An efficient catalyst based on artificial bionic peroxidase was synthesized for electrocatalysis. A poly(ethyleneimine)/Au nanoparticle composite (PEI-AuNP) was prepared and it was then linked to hemin via a coupling reaction between carboxyl groups in hemin and amino groups in PEI without the activation of a carboxyl group by carbodiimide. Fourier transform infrared (FTIR) spectroscopy verified the formation of amido bonds within the structure. The presence of AuNPs contributed greatly in establishing the amido bonds within the composite. Transmission electron microscopy (TEM) and UV-visible spectroscopy were also used to characterize the PEI-AuNP-hemin catalyst. PEI-AuNP-hemin exhibited intrinsic peroxidase-like catalytic activities. The PEI-AuNP-hemin deposited on a glass carbon electrode had strong sensing for H2O2 with a well-defined linear relationship between the amperometric response and H2O2 concentration in the range from 1 μM to 0.25 mM. The detection limit was 0.247 nM with a high sensitivity of 0.347 mA mM(-1) cm(-2). The peroxidase-like catalytic activity of PEI-AuNP-hemin is discussed in relation to its microstructure. The study suggests that PEI-AuNP-hemin may have promising application prospects in biocatalysis and bioelectronics.

Facile carbohydrate-mimetic modifications of poly(ethylene imine) carriers for gene delivery applications

PEI was chemically-modified with carbohydrates and carbohydrate-mimetics to improve biocompatibility.

Oligonucleotide Immobilization and Hybridization on Aldehyde-Functionalized Poly(2-hydroxyethyl methacrylate) Brushes

DNA biosensing requires high oligonucleotide binding capacity interface chemistries that can be tuned to maximize probe presentation as well as hybridization efficiency. This contribution investigates the feasibility of aldehyde-functionalized poly(2-hydroxyethyl methacrylate) (PHEMA) brush-based interfaces for oligonucleotide binding and hybridization. These polymer brushes, which allow covalent immobilization of oligonucleotides, are prepared by surface-initiated atom transfer radical polymerization (SI-ATRP) of HEMA followed by a postpolymerization oxidation step to generate side chain aldehyde groups. A series of polymer brushes covering a range of film thicknesses and grafting densities was investigated with regard to their oligonucleotide binding capacity as well as their ability to support oligonucleotide hybridization. Densely grafted brushes were found to have probe oligonucleotide binding capacities of up to ∼30 pmol/cm(2). Increasing the thickness of these densely grafted brush films, however, resulted in a decrease in the oligonucleotide binding capacity. Less densely grafted brushes possess binding capacities of ∼10 pmol/cm(2), which did not significantly depend on film thickness. The oligonucleotide hybridization efficiencies, however, were highest (93%) on those brushes that present the lowest surface concentration of the probe oligonucleotide. These results highlight the importance of optimizing the probe oligonucleotide surface concentration and binding interface chemistry. The versatility and tunability of the PHEMA-based brushes presented herein makes these films a very attractive platform for the immobilization and hybridization of oligonucleotides.

Utilizing Intrinsic Properties of Polyaniline to Detect Nucleic Acid Hybridization through UV-Enhanced Electrostatic Interaction

Detection of specific RNA or DNA molecules by hybridization to "probe" nucleic acids via complementary base-pairing is a powerful method for analysis of biological systems. Here we describe a strategy for transducing hybridization events through modulating intrinsic properties of the electroconductive polymer polyaniline (PANI). When DNA-based probes electrostatically interact with PANI, its fluorescence properties are increased, a phenomenon that can be enhanced by UV irradiation. Hybridization of target nucleic acids results in dissociation of probes causing PANI fluorescence to return to basal levels. By monitoring restoration of base PANI fluorescence as little as 10(-11) M (10 pM) of target oligonucleotides could be detected within 15 min of hybridization. Detection of complementary oligos was specific, with introduction of a single mismatch failing to form a target-probe duplex that would dissociate from PANI. Furthermore, this approach is robust and is capable of detecting specific RNAs in extracts from animals. This sensor system improves on previously reported strategies by transducing highly specific probe dissociation events through intrinsic properties of a conducting polymer without the need for additional labels.

In vitro study of partially hydrolyzed poly(2-ethyl-2-oxazolines) as materials for biomedical applications

Polymers based on 2-oxazoline, such as poly(2-ethyl-2-oxazolines) (PETOx), are considered to be a type of 'pseudopeptide' with the ability to form novel biomaterials. The hydrolysis of PETOx was carried out to evaluate its use in biomedical applications. In the present work, PETOx samples with a range of molar masses were prepared by living cationic polymerization. Hydrolysis was carried out at time intervals ranging from 15 to 180 min to prepare copolymers with different amounts of ethylene imine units. (1)H NMR spectroscopy was used to identify the structure of the hydrolyzed polymers. The dependence of in vitro cell viability on the degree of hydrolysis was determined using three different model cell lines, namely, mouse embryonic 3T3 fibroblasts, pancreatic βTC3 cells, and mouse lymphoid macrophages P388.D1. It was demonstrated that increasing the degree of hydrolysis decreased cell viability for all cell types. Fibroblast cells displayed the highest tolerance; additionally, the effect of polymer size showed no observable significance. Macrophage cells, immune system representatives, displayed the highest sensitivity to contact with hydrolyzed PETOx. The effect of polymer hydrolysis, polymer concentration and the incubation time on cell viability was experimentally observed. Confocal laser-scanning microscopy provided evidence of cellular uptake of pyrene-labeled (co)polymers.

Covalently cross-linked poly(2-oxazoline) materials for biomedical applications – from hydrogels to self-assembled and templated structures

We discuss covalently cross-linked poly(2-oxazoline)s including gels, nanogels and capsules on the basis of their synthetic origin in a biomedical context.

Poly(2-oxazoline)-based nanogels as biocompatible pseudopolypeptide nanoparticles

Hydrophilic nanogels based on partially hydrolyzed poly(2-ethyl-2-oxazoline) were synthesized in dilute aqueous media in the presence of 1,6-hexanediol diglycidyl ether as a cross-linker. Nanogel formation was monitored by DLS and HSQC NMR spectroscopy, and the final nano-objects were characterized by DLS, TEM, AFM, and NanoSight analyses. Nanogels with a hydrodynamic radius of 78 nm exhibiting a slight positive surface charge were obtained. MTS assays (cell metabolic activity test) evidenced that nanogels were nontoxic in the investigated concentration range (i.e., 0.1 to 400 μg/mL) and that no specific interaction with bovine serum albumin was observed.