Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic Acid fibers

Self-Assembled Hydrogel Membranes with Structurally Tunable Mechanical and Biological Properties

Using supramolecular self-assembled nanocomposite materials made from protein and polysaccharide components is becoming more popular because of their unique properties, such as biodegradability, hierarchical structures, and tunable multifunctionality. However, the fabrication of these materials in a reproducible way remains a challenge. This study presents a new evaporation-induced self-assembly method producing layered hydrogel membranes (LHMs) using tropocollagen grafted by partially deacetylated chitin nanocrystals (CO-g-ChNCs). ChNCs help stabilize tropocollagen's helical conformation and fibrillar structure by forming a hierarchical microstructure through chemical and physical interactions. The LHMs show improved mechanical properties, cytocompatibility, and the ability to control drug release using octenidine dihydrochloride (OCT) as a drug model. Because of the high synergetic performance between CO and ChNCs, the modulus, strength, and toughness increased significantly compared to native CO. The biocompatibility of LHM was tested using the normal human dermal fibroblast (NHDF) and the human osteosarcoma cell line (Saos-2). Cytocompatibility and cell adhesion improved with the introduction of ChNCs. The extracted ChNCs are used as a reinforcing nanofiller to enhance the performance properties of tropocollagen hydrogel membranes and provide new insights into the design of novel LHMs that could be used for various medical applications, such as control of drug release in the skin and bone tissue regeneration.

Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.

Intrinsically radiopaque and antimicrobial cellulose based surgical sutures from mechanically powerful Agave sisalana plant leaf fibers

The judicious configuration of a flexible radiopaque suture would be exemplary to facilitate effortless tracking and precise diagnosis of the sutured surgical site by various X-ray assisted imaging modalities and simultaneously serve as a complementary tool for monitoring the fate of the suture material during the post-operative course. A unique radiopaque cellulose based surgical suture (RF) with good mechanical properties was developed by strategically controlled mercerization and bleaching of mechanically strong natural cellulosic fibers extracted from Agave sisalana plant leaves followed by the facile dip-coating of SrO integrated polylactic acid (PLA). RF exhibited admirable straight-pull tensile strength (184 MPa) and commendable contrast enhancement (277.4%) under digital X-ray radiographic imaging which was further validated by micro-CT analysis. Further, RF has a controlled hydrolytic degradation profile favorable for surgical suturing (mass loss ∼22% in 28 days). The microporous surface architecture of RF (pore size < 10 μm) as a result of SrO-PLA coating enabled the loading of antibiotic (ciprofloxacin) deep inside the pores with a cumulative release of 24% at 28 days under physiological conditions substantiating its feasibility to be used as an efficient antimicrobial suture (CRF) that prevents possible bacterial infections at the surgical site. This has been demonstrated by antibacterial disc diffusion assay performed against two Gram-positive and two Gram-negative bacterial strains. Significantly, both RF and CRF are highly biocompatible as confirmed by MTT assay and F-actin staining. Hence, CRF would be a good biocompatible suture candidate holding good tensile properties, exceptional antimicrobial property and intrinsic radiopacity retention for a period >28 days.

Correlation between Surface Properties of Polystyrene and Polylactide Materials and Fibroblast and Osteoblast Cell Line Behavior: A Critical Overview of the Literature

Bone reconstruction remains an important challenge today in several clinical situations, notably regarding the control of the competition occurring during proliferation of osteoblasts and fibroblasts. Polystyrene and polylactide are reference materials in the biomedical field. Therefore, it could be expected from the literature that clear correlations have been already established between the behavior of fibroblasts or osteoblasts and the surface characteristics of these materials. After an extensive analysis of the literature, although general trends could be established, our critical review has highlighted the need to develop a more in-depth analysis of the surface properties of these materials. Moreover, the large variation noticed in the experimental conditions used for in vitro animal cell studies impairs comparison between studies. From our comprehensive review on this topic, we have suggested several parameters that would be valuable to standardize to integrate the data from the literature and improve our knowledge on the cell-material interactions.

Facile Fabrication of Methylcellulose/PLA Membrane with Improved Properties

With the rapid exhaustion of fossil resources, and environmental pollution relative to the use of fossil-based products, developing eco-friendly products using biomass and/or biodegradable resources is becoming increasingly conspicuous. In this study, ecofriendly and biodegradable composite membranes containing varying MC/PLA (methylcellulose/polylactic acid) mass ratios were prepared. The properties and structures of the MC/PLA membranes were studied by mechanical testing, 13C NMR techniques, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and hot compression. The MC/PLA membranes displayed markedly improved tensile strength and elongation at the MC/PLA mass ratio range of 99:1 to 9:1. The tensile strength and elongation of the MC/PLA (97:3) membrane was found to be the optimum, at 30% and 35% higher than the neat MC, respectively. It was also found that hot compression could improve the tensile strength and elongation of the membranes. At the same time, the membranes showed enough good thermal stability. In addition, the effect of MC/PLA mass ratio on morphologies of the membranes were studied by microscopy technique.

Poly(Lactic Acid) Composites

Polylactic acid-based materials have gained great interest within the scientific community due to their biodegradability, good performance, and suitability for a number of applications. Therefore, this Special Issue “Poly(lactic acid) Composites” is proposed to cover the important advances in poly (lactic acid) composites, ranging from their design, fabrication, and material properties to the potential applications of these materials. Therefore, we believe that the present Issue can convey beneficial information to scientists and engineers in numerous fields, including polymer science and biomedical engineering.

Engineered Three-Dimensional Microenvironments with Starch Nanocrystals as Cell-Instructive Materials

Naturally, cells reside in three-dimensional (3D) microenvironments composed of biopolymers that guide cellular behavior via topographical features as well as through mechanical and biochemical cues. However, most studies describing the influence of topography on cells' behavior are performed on rigid and synthetic two-dimensional substrates. To design systems that more closely resemble native microenvironments, herein we develop 3D nanocomposite hydrogels consisting of starch nanocrystals (SNCs) embedded in a gelatin matrix. The incorporation of different concentrations of SNCs (0.05, 0.2, and 0.5 wt %) results in an increase of compressive modulus when compared to hydrogels without SNCs, without affecting the swelling ratio, thus providing a tunable system. Confirming the cytocompatibility of the novel composites, the viability of encapsulated L929 fibroblasts is >90% in all hydrogels. The cellular metabolic activity and DNA content are similar for all formulations and increase over time, indicating that the fibroblasts proliferate within the hydrogels. After 4 d of culture, Live/Dead staining and F-actin/nuclei staining show that the encapsulated fibroblasts develop an elongated morphology in the hydrogels. On the other hand, encapsulated chondrogenic progenitor ATDC5 cells also maintain a viability around 90% but display a round morphology, especially in the hydrogels with SNCs, indicating a potential application of the materials for cartilage tissue engineering. We believe that topographical and mechanical cues within 3D microenvironments can be a powerful tool to instruct cells' behavior and that the developed gelatin/SNC nanocomposite warrants further study.

Nanocellulose-based polymer hybrids and their emerging applications in biomedical engineering and water purification

Nanocellulose, derived from cellulose hydrolysis, has unique optical and mechanical properties, high surface area, and good biocompatibility. It is frequently used as a reinforcing agent to improve the native properties of materials. The presence of functional groups in its surface enables the alteration of its behavior and its use under different conditions. Nanocellulose is typically used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). CNCs and CNFs have a high aspect ratio with typical lengths of ∼100-250 nm and 0.1-2 μm, respectively; BNC is nanostructured cellulose produced by bacteria. Nanohybrid materials are a combination of organic or inorganic nanomaterials with macromolecules forming a single composite and typically exhibit superior optical, thermal, and mechanical properties to those of native polymers, owing to the greater interactions between the macromolecule matrix and the nanomaterials. Excellent biocompatibility and biodegradability make nanocellulose an ideal material for applications in biomedicine. Unlike native polymers, nanocellulose-based nanohybrids exhibit a sustained drug release ability, which can be further optimized by changing the content or chemical environment of the nanocellulose, as well as the external stimuli, such as the pH and electric fields. In this review, we describe the process of extraction of nanocellulose from different natural sources; its effects on the structural, morphological, and mechanical properties of polymers; and its various applications.

Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites

Over the past decades, research has escalated on the use of polylactic acid (PLA) as a replacement for petroleum-based polymers. This is due to its valuable properties, such as renewability, biodegradability, biocompatibility and good thermomechanical properties. Despite possessing good mechanical properties comparable to conventional petroleum-based polymers, PLA suffers from some shortcomings such as low thermal resistance, heat distortion temperature and rate of crystallization, thus different fillers have been used to overcome these limitations. In the framework of environmentally friendly processes and products, there has been growing interest on the use of cellulose nanomaterials viz. cellulose nanocrystals (CNC) and nanofibers (CNF) as natural fillers for PLA towards advanced applications other than short-term packaging and biomedical. Cellulosic nanomaterials are renewable in nature, biodegradable, eco-friendly and they possess high strength and stiffness. In the case of eco-friendly processes, various conventional processing techniques, such as melt extrusion, melt-spinning, and compression molding, have been used to produce PLA composites. This review addresses the critical factors in the manufacturing of PLA-cellulosic nanomaterials by using conventional techniques and recent advances needed to promote and improve the dispersion of the cellulosic nanomaterials. Different aspects, including morphology, mechanical behavior and thermal properties, as well as comparisons of CNC- and CNF-reinforced PLA, are also discussed.

Synthesis of Thermoplastic Xylan-Lactide Copolymer with Amidine-Mediated Organocatalyst in Ionic Liquid

Ring-opening graft polymerization (ROGP) of L-Lactide (L-LA) is a practical method of altering the physical and chemical properties of lignocellulose. Previous studies have mainly investigated cellulose and tin-based catalysts, particularly of tin(II) 2-ethylhexanoate (Sn(oct)2), at high temperatures and reported low graft efficiencies. In the present study, ROGP of L-LA was successfully achieved on xylan-type hemicelluloses in ionic liquid (IL) 1-allyl-3-methylimidazolium chloride ([Amim]Cl) using 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as an effective organic catalyst. Mild reaction condition (50 °C) was used to limit transesterification, and thus enhance the graft efficiency. The hydroxyl groups on xylan acted as initiators in the polymerization, and DBU, enhanced the nucleophilicity of the initiator and the propagating chain. Xylan-graft-poly(L-Lactide) (xylan-g-PLA) copolymer with a degree of substitution (DS) of 0.58 and a degree of polymerization (DP) of 5.51 was obtained. In addition, the structures of the xylan-g-PLA copolymers were characterized by GPC, FT-IR and NMR, confirming the success of the ROGP reaction. Thermal analysis revealed that the copolymers exhibited a single glass-transition temperature (T g), which decreased with increasing molar substitution (MS). Thus, modification resulted in the graft copolymers with thermoplastic behavior and tunable T g.

Poly(lactic acid) blends in biomedical applications

Poly(lactic acid) (PLA) has become a "material of choice" in biomedical applications for its ability to fulfill complex needs that typically include properties such as biocompatibility, biodegradability, mechanical strength, and processability. Despite the advantages of pure PLA in a wider spectrum of applications, it is limited by its hydrophobicity, low impact toughness, and slow degradation rate. Blending PLA with other polymers offers a convenient option to enhance its properties or generate novel properties for target applications without the need to develop new materials. PLA blends with different natural and synthetic polymers have been developed by solvent and melt blending techniques and further processed based on end-use applications. A variety of PLA blends has been explored for biomedical applications such as drug delivery, implants, sutures, and tissue engineering. This review discusses the opportunities for PLA blends in the biomedical arena, including the overview of blending and postblend processing techniques and the applications of PLA blends currently in use and under development.

The Influence of Modified Silica Nanomaterials on Adult Stem Cell Culture

The preparation of tailored nanomaterials able to support cell growth and viability is mandatory for tissue engineering applications. In the present work, silica nanoparticles were prepared by a sol-gel procedure and were then functionalized by condensation of amino groups and by adsorption of silver nanoparticles. Transmission electron microscopy (TEM) imaging was used to establish the morphology and the average dimensions of about 130 nm, which were not affected by the functionalization. The three silica samples were deposited (1 mg/mL) on cover glasses, which were used as a substrate to culture adult human bone marrow-mesenchymal stem cells (hBM-MSCs) and human adipose-derived stem cells (hASCs). The good cell viability over the different silica surfaces was evaluated by monitoring the mitochondrial dehydrogenase activity. The analysis of the morphological parameters (aspect ratio, cell length, and nuclear shape Index) yielded information about the interactions of stem cells with the surface of three different nanoparticles. The data are discussed in terms of chemical properties of the surface of silica nanoparticles.

Silane crosslinking of electrospun poly (lactic acid)/nanocrystalline cellulose bionanocomposite

Biodegradable nanofibrous mats fabricated by electrospinning are commonly used in tissue engineering, however, lack of essential mechanical properties of such nanofibers is a challenging issue. In this work, vinyltrimethoxysilane (VTMS) was grafted onto poly (lactic acid) (PLA) and the silane grafted PLA was subsequently applied in electrospinning process. Electrospun nanofibrous mats based on PLA/nanocrystalline cellulose (NCC) and PLA-g-silane/NCC nanocomposites were fabricated and immersed in hot water (70°C) for crosslinking of silane grafted PLA. It was found that introducing NCC to the samples cause to reduction in fiber diameter and the other hand the silane crosslinking of PLA increase the mean fiber diameter. DSC thermograms also revealed that silane grafting caused a reduction in mobility of polymer segments, and consequently reduction of crystallinity. On the contrary, the NCC in the PLA-g-silane samples effectively influenced the crystal nucleation, while in the PLA nanofibers the nucleation was lower. The impact of NCC on tensile strength enhancement of samples was notable. The results suggested that the chemical crosslinking remarkably improves the mechanical properties of PLA nanofibers. Furthermore, biocompatibility of such modified nanofibers was also evaluated through cytotoxicity results, therefore the modified PLA nanocomposite can be considered as a practical candidate for hard tissue engineering applications.

Poly(lactic acid)-Based in Situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability

Melt blending is one of the most promising techniques for eliminating poly(lactic acid)'s (PLA) numerous drawbacks. However, success in a typical melt blending process is usually achieved through the inclusion of high concentrations of a second polymeric phase which can compromise PLA's green nature. In a pioneering study, we introduce the production of in situ microfibrillar PLA/polyamide-6 (PA6) blends as a cost-effective and efficient technique for improving PLA's properties while minimizing the required PA6 content. Predominantly biobased products, with only 3 wt % of in situ generated PA6 microfibrils (diameter ≈200 nm), were shown to have dramatically improved crystallization kinetics, mechanical properties, melt elasticity and strength, and foaming-ability compared with PLA. Crucially, the microfibrillar blends were produced using an environmentally friendly and cost-effective process. Both of these qualities are essential in guarantying the viability of the proposed technique for overcoming the obstacles associated with the vast commercialization of PLA.

Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications

Tubular scaffolds with aligned polylactic acid (PLA) fibres were fabricated for cell guide applications by immersing rolled PLA fibre mats into a polyvinyl acetate (PVAc) solution to bind the mats. The PVAc solution was also mixed with up to 30 wt % β-tricalcium phosphate (β-TCP) content. Cross-sectional images of the scaffold materials obtained via scanning electron microscopy (SEM) revealed the aligned fibre morphology along with a significant number of voids in between the bundles of fibres. The addition of β-TCP into the scaffolds played an important role in increasing the void content from 17.1% to 25.3% for the 30 wt % β-TCP loading, which was measured via micro-CT (µCT) analysis. Furthermore, µCT analyses revealed the distribution of aggregated β-TCP particles in between the various PLA fibre layers of the scaffold. The compressive modulus properties of the scaffolds increased from 66 MPa to 83 MPa and the compressive strength properties decreased from 67 MPa to 41 MPa for the 30 wt % β-TCP content scaffold. The scaffolds produced were observed to change into a soft and flexible form which demonstrated shape recovery properties after immersion in phosphate buffered saline (PBS) media at 37 °C for 24 h. The cytocompatibility studies (using MG-63 human osteosarcoma cell line) revealed preferential cell proliferation along the longitudinal direction of the fibres as compared to the control tissue culture plastic. The manufacturing process highlighted above reveals a simple process for inducing controlled cell alignment and varying porosity features within tubular scaffolds for potential tissue engineering applications.

Redefining biorefinery: the search for unconventional building blocks for materials

This review discusses different strategies for the upgrading of biomass into sustainable monomers and building blocks as scaffolds for the preparation of green polymers and materials.

Development of microspheres for biomedical applications: a review

An overview of microspheres manufactured for use in biomedical applications based on recent literature is presented in this review. Different types of glasses (i.e. silicate, borate, and phosphates), ceramics and polymer-based microspheres (both natural and synthetic) in the form of porous , non-porous and hollow structures that are either already in use or are currently being investigated within the biomedical area are discussed. The advantages of using microspheres in applications such as drug delivery, bone tissue engineering and regeneration, absorption and desorption of substances, kinetic release of the loaded drug components are also presented. This review also reports on the preparation and characterisation methodologies used for the manufacture of these microspheres. Finally, a brief summary of the existing challenges associated with processing these microspheres which requires further research and development are presented.