Amine Functionalization of Cholecyst-Derived Extracellular Matrix with Generation 1 PAMAM Dendrimer

Collagen Biocomposites Derived from Fish Waste: Doped and Cross-Linked with Functionalized Fe3O4 Nanoparticles and Their Comparative Studies with a Green Approach

Collagen-based nanobiocomposites can reabsorb and are biodegradable. These properties are effectively controlled by the number of cross-links. This study demonstrates an effortless and proficient approach for the functionalization of Fe₃O₄ NPs for cross-linking collagen obtained from biowaste, viz., fish scales of Lates Calcarifer, a marine origin. The size of Fe₃O₄ NPs (10-40 nm) was confirmed using particle size analysis. The physico-chemical properties of the aminosilane-coated Fe₃O₄ NPs cross-linked via succinylated collagen (FFCSC) were characterized using different analytical techniques and compared with succinylated collagen doped with Fe₃O₄ NPs (FDSC). Thermogravimetric analysis indicates cross-linked product FFCSC to be more stable than the FDSC. Also, the antibacterial effect was more pronounced for FFCSC than for FDSC nanobiocomposites. FFCSC exhibited improved mechanical properties which are essential for materials used for wound dressing purposes. Moreover, the cell viability of fibroblasts (3T3-L1) and their morphology studied by SEM and fluorescence microscopy showed biocompatibility of both FDSC and FFCSC. Thus, the current investigation, involves a waste to wealth approach where the collagen-based nanobiocomposites present an easy way to recycle the biowaste to value-added products using simple and clean methods, which are suitable for use in biomedical and environmental applications.

Dendritic Polymers in Tissue Engineering: Contributions of PAMAM, PPI PEG and PEI to Injury Restoration and Bioactive Scaffold Evolution

The capability of radially polymerized bio-dendrimers and hyperbranched polymers for medical applications is well established. Perhaps the most important implementations are those that involve interactions with the regenerative mechanisms of cells. In general, they are non-toxic or exhibit very low toxicity. Thus, they allow unhindered and, in many cases, faster cell proliferation, a property that renders them ideal materials for tissue engineering scaffolds. Their resemblance to proteins permits the synthesis of derivatives that mimic collagen and elastin or are capable of biomimetic hydroxy apatite production. Due to their distinctive architecture (core, internal branches, terminal groups), dendritic polymers may play many roles. The internal cavities may host cell differentiation genes and antimicrobial protection drugs. Suitable terminal groups may modify the surface chemistry of cells and modulate the external membrane charge promoting cell adhesion and tissue assembly. They may also induce polymer cross-linking for healing implementation in the eyes, skin, and internal organ wounds. The review highlights all the different categories of hard and soft tissues that may be remediated with their contribution. The reader will also be exposed to the incorporation of methods for establishment of biomaterials, functionalization strategies, and the synthetic paths for organizing assemblies from biocompatible building blocks and natural metabolites.

Dendrimer as a momentous tool in tissue engineering and regenerative medicine

Dendrimers have been comprehensively used for cargo delivery, nucleic acid delivery (genes, miRNA/siRNAs), delivery of macromolecules, and other various biomedical applications. Dendrimers are highly versatile in function and can be engineered as multifunctional biomacromolecules by modifying the surface for fulfilling different applications. Dendrimers are being used for crosslinking of existing synthetic and natural polymeric scaffolds to regulate their binding efficiency, stiffness, biocompatibility, transfection, and many other properties to mimic the in vivo extracellular matrix in tissue engineering and regenerative medicine (TERM). Dendritic inter-cellular linkers can enhance the linkages between cells and result in scaffold-independent tissue constructs. Effectively engineered dendrimers are the ideal molecules for delivering bioactive molecules such as cytokines, chemokines, growth factors, etc., and other metabolites for efficaciously regulating cell behavior. Dendrimeric nanostructures have shown tremendous results in various TERM fields like stem cells survival, osteogenesis, increased crosslinking for eye and corneal repair, and proliferation in cartilage. This review highlights the role and various aspects of dendritic polymers for TERM in general and with respect to specific tissues. This review also covers novel explorations and insights into the use of dendrimers in TERM, focusing on the developments in the past decade and perspective of the future.

Rational Design of Surface-State Controlled Multicolor Cross-Linked Carbon Dots with Distinct Photoluminescence and Cellular Uptake Properties

We disclose for the first time a facile synthetic methodology for the preparation of multicolor carbon dots (CDs) from a single source barring any chromatographic separations. This was achieved via sequential intraparticle cross-linking of surface abundant carboxylic acid groups on the CDs synthesized from a precursor to control their photoluminescence (PL) spectra as well as affect their degree of cellular internalization in cancer cells. The change in PL spectra with sequential cross-linking was projected by theoretical density functional theory (DFT) studies and validated by multiple characterization tools such as X-ray photoelectron spectroscopy (XPS), PL spectroscopy, ninhydrin assay, etc. The variation in cellular internalization of these cross-linked CDs was demonstrated using inhibitor assays, confocal microscopy, and flow cytometry. We supplemented our findings with high-resolution dark-field imaging to visualize and confirm the colocalization of these CDs into distinct intracellular compartments. Finally, to prove the surface-state controlled PL mechanisms of these cross-linked CDs, we fabricated a triple-channel sensor array for the identification of different analytes including metal ions and biologically relevant proteins.

Synthesis, characterization and applications of poly-aliphatic amine dendrimers and dendrons

In the current era, the dendrimers have vast potential applications in the area of electronics, healthcare, pharmaceuticals, biotechnology, engineering products, photonics, drug delivery, catalysis, electronic devices, nanotechnologies and environmental issues. This review recaps the synthesis, characterization and applications of poly-aliphatic amine dendrimers.

Polyamidoamide Dendrimers and Cross-Linking Agents for Stabilized Bioenzymatic Resistant Metal-Free Bovine Collagen

The work reports the use of polyamidoamine dendrimers (PAMAM) and a cross-linking agent, 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/N-hydroxysuccinimide (EDC/NHS) or 4-(4,6-dimethoxy[1,3,5]triazin-2-yl)-4-methyl-morpholinium chloride (DMTMM), for the thermal stabilization of dermal bovine collagen. The efficiency of EDC/NHS/PAMAM and DMTMM/PAMAM in the cross-linking of collagen is correlated to the increase of the collagen shrinkage temperature (Ts), measured by differential scanning calorimetry (DSC). An alternative enzymatic protocol was adopted to measure the degradability of EDC/NHS/PAMAM tanned hides; these data are correlated to the thermal stability values measured by DSC. In the presence of PAMAMs, EDC/NHS provides very high stabilization of bovine dermal collagen, giving Ts of up to 95 °C, while DMTMM achieves lower stabilization. Preliminary tanning tests carried out in best reaction conditions show that EDC/NHS/PAMAM could be an interesting, environmentally-sustainable tanning system which is completely free of metals, formaldehyde, and phenols. Two new unreported dendrimeric species were synthesized and employed.

EGCG and enzymatic cross-linking combined treatments for improving elastin stability and reducing calcification in bioprosthetic heart valves

The failures of glutaraldehyde (GLUT) cross-linked bioprosthetic heart valves (BHVs) are mainly due to degeneration and calcification. In this study, we developed a new preparation strategy for BHVs named as "HPA/EDC/EGCG" that utilized 3,4-hydroxyphenylpropionic acid (HPA)-conjugated pericardium, epigallocatechin gallate (EGCG), and horseradish peroxidase (HRP)/hydrogen peroxide (H₂ O₂ ) enzymatic cross-linking. HPA-pericardium conjugation was done by carbodiimide coupling reaction using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS). Then HPA-conjugated pericardium was cross-linked by HRP/H₂ O₂ enzyme-catalyzed oxidation. The feeding ratios of HPA and EGCG were optimized. The consumption of amino groups, collagenase and elastase degradation in vitro, biomechanics, extracellular matrix stability, and calcification of HPA-/EDC-/EGCG-treated pericardiums were characterized. We demonstrated that HPA-/EDC-/EGCG-treated pericardiums had better elastin stabilization and less calcification. EGCG and enzymatic cross-linking treated pericardiums showed improved mechanical properties. This new EGCG and enzymatic cross-linking strategy would be a promising method to make BHVs with better elastin stability and anti-calcification property. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1551-1559, 2019.

An Immunopathological Evaluation of the Porcine Cholecyst Matrix as a Muscle Repair Graft in a Male Rat Abdominal Wall Defect Model

With the increasing use of animal-based biomaterials for regenerative medical applications, the need for their safety assessment is paramount. A porcine cholecyst-derived scaffold (CDS), intended as a muscle repair graft, prepared by a nondetergent/enzymatic method was engrafted in a rat abdominal wall defect model. Host tissue–scaffold interface samples were collected 2, 8, and 16 weeks postimplantation and evaluated by histopathology, immunohistochemistry, and electron microscopy. The nature of the tissue reaction was compared with those induced by a jejunum-derived scaffold (JDS) prepared by the same method and a commercial-grade small intestinal submucosa (CSIS) scaffold. A study of the immunopathological response in major lymphoid tissues and immunophenotyping for M1 and M2 macrophages was performed at the host tissue–scaffold interface. Further, “irritancy scores” for CDS and JDS were determined using CSIS as the reference material. Both CDS and JDS appeared to be potential biomaterials for muscle grafts, but the former stimulated a skeletal muscle tissue remodeling response predominated by M2 macrophages. The data support the notion that biomaterials with similar biocompatibility, based on local tissue response on implantation, may cause differential immunogenicity. Additionally, CDS compared to JDS and CSIS was found to be less immunotoxic.

Highly selective and sensitive visualization and identification of glycoproteins using multi-functionalized soluble dendrimer

Glycoproteins are the most important and complex group of posttranslational modifications known in proteins. Many clinical biomarkers and therapeutic targets in cancer are glycoproteins. However, the isolation of glyco-specific antibodies and their poor stability remains a significant challenge in analytical method and diagnostic development. In this work, for the first time, we present a technology for highly efficient and selective glycosylation analysis on membrane without the use of glyco-specific antibodies. This approach, termed Nanopoly-BAV, which uses polyamidoamine dendrimers multifunctionalized with boronic acid for specific binding to glycoproteins and with biotin groups for glycoproteins visualization. The Nanopoly-BAV confers femtomolar sensitivity, exceptional glycoprotein specificity and selectivity with as high as 100000 folds for glycoproteins over nonglycoproteins. This synthetic, robust and highly selective Nanopoly-BAV has a great potential to measure cell signaling events by clearly distinguishing actual glycosylation signals from protein expression changes with superior stability. This technique may provide a powerful tool to monitor cellular signaling pathways and discovering new signaling events.

Influence of Cross-Linker Concentration on the Functionality of Carbodiimide Cross-Linked Gelatin Membranes for Retinal Sheet Carriers

Carbodiimide cross-linking can easily regulate the functionality of gelatin carriers used for retinal sheet delivery. This paper investigates the effect of cross-linker concentrations (0-0.4 mmol EDC/mg gelatin membrane (GM)) on the properties of the chemically-modified GMs. ATR-FT-IR and ninhydrin analyses results consistently indicated that the EDC cross-linking reaction approaches saturation at concentrations around 0.02 mmol EDC/mg GM. The thermal stability and resistance to water dissolution and collagenase digestion were significantly enhanced with increasing cross-linker concentration from 0.001 to 0.02 mmol EDC/mg GM. In addition, the chemical cross-linking did not affect the ability to form a tissue-encapsulating structure at 37°C. Irrespective of their cross-linking degree, the GMs had an appropriate degradation rate sufficient to allow tissue integration. It was noted that, although high cross-linker concentrations can be used to improve the delivery efficiency of gelatin samples, the treatment with 0.1-0.4 mmol EDC/mg GM may lead to poor biocompatibility. Results of Live/Dead and pro-inflammatory cytokine expression analyses showed that the exposure of ARPE-19 cultures to the test materials cross-linked with a concentration ≥0.1 mmol EDC/mg GM induces significant cytotoxicity and high levels of interleukin-1β and interleukin-6. However, the presence of EDC cross-linked gelatin membranes in the culture medium had no effect on the glutamate uptake capacity. It is concluded that among the cross-linked gelatin samples studied, 0.02 mmol EDC/mg GM is the best cross-linker concentration for preparation of retinal sheet delivery carriers.

PEG-b-AGE Polymer Coated Magnetic Nanoparticle Probes with Facile Functionalization and Anti-fouling Properties for Reducing Non-specific Uptake and Improving Biomarker Targeting

Non-specific surface adsorption of bio-macromolecules (e.g. proteins) on nanoparticles, known as biofouling, and the uptake of nanoparticles by the mononuclear phagocyte system (MPS) and reticuloendothelial system (RES) lead to substantial reduction in the efficiency of target-directed imaging and delivery in biomedical applications of engineered nanomaterials in vitro and in vivo. In this work, a novel copolymer consisting of blocks of poly ethylene glycol and allyl glycidyl ether (PEG-b-AGE) was developed for coating magnetic iron oxide nanoparticles (IONPs) to reduce non-specific protein adhesion that leads to formation of "protein corona" and uptake by macrophages. The facile surface functionalization was demonstrated by using targeting ligands of a small peptide of RGD or a whole protein of transferrin (Tf). The PEG-b-AGE coated IONPs exhibited anti-biofouling properties with significantly reduced protein corona formation and non-specific uptake by macrophages before and after the surface functionalization, thus improving targeting of RGD-conjugated PEG-b-AGE coated IONPs to integrins in U87MG glioblastoma and MDA-MB-231 breast cancer cells that overexpress α_vβ₃ integrins, and Tf-conjugated PEG-b-AGE coated IONPs to transferrin receptor (TfR) in D556 and Daoy medulloblastoma cancer cells with high overexpression of transferrin receptor, compared to respective control cell lines. Magnetic resonance imaging (MRI) of cancer cells treated with targeted IONPs with or without anti-biofouling PEG-b-AGE coating polymers demonstrated the target specific MRI contrast change using anti-biofouling PEG-b-AGE coated IONP with minimal off-targeted background compared to the IONPs without anti-biofouling coating, promising the highly efficient active targeting of nanoparticle imaging probes and drug delivery systems and potential applications of imaging quantification of targeted biomarkers.

Dendrimer-PLGA based multifunctional immuno-nanocomposite mediated synchronous and tumor selective delivery of siRNA and cisplatin: potential in treatment of hepatocellular carcinoma

The in-house synthesized PLK-1 siRNA and cisplatin loaded innovative dendrimer-PLGA immuno-nanocomposite bears the capacity of delivering both the cargos simultaneously to the same liver cancer cell in a targeted manner.

Synthesis, characterization and evaluation of collagen scaffolds crosslinked with aminosilane functionalized silver nanoparticles: in vitro and in vivo studies

This work presents a novel approach for functionalization of silver nanoparticles and cross-linking them with collagen to form FSCSC scaffolds suitable for clinical applications.

Influence of sterilisation methods on collagen-based devices stability and properties

Sterilisation is essential for any implantable medical device in order to prevent infection in patients. The selection of the most appropriate sterilisation method depends on the nature and the physical state of the material to be sterilised; the influence of the sterilisation method on the properties of the device; and the type of the potential contaminant. In this context, herein we review the influence of ethylene oxide, γ-irradiation, e-beam irradiation, gas plasma, peracetic acid and ethanol on structural, biomechanical, biochemical and biological properties of collagen-based devices. Data to-date demonstrate that chemical approaches are associated with cytotoxicity, whilst physical methods are associated with degradation, subject to the device physical characteristics. Thus, the sterilisation method of choice is device dependent.

Porcine cholecyst-derived scaffold promotes full-thickness wound healing in rabbit

Graft-assisted healing is an important strategy for treating full-thickness skin wounds. This study evaluated the properties of porcine cholecyst-derived scaffold and its use for treating full-thickness skin wound in rabbit. The physical properties of cholecyst-derived scaffold were congenial for skin-graft application. Compared to a commercially available skin-graft substitute made of porcine small intestinal submucosa, the cholecyst-derived scaffold was rich in natural biomolecules like elastin and glycosaminoglycans. When used as a xenograft, it promoted healing with excess cell proliferation at early phases and acceptable collagen deposition in the later remodelling phases.

Amine functionalization of collagen matrices with multifunctional polyethylene glycol systems

A method to functionalize collagen-based biomaterials with free amine groups was established in an attempt to improve their potential for tethering of bioactive molecules. Collagen sponges were incorporated with amine-terminated multifunctional polyethylene glycol (PEG) derivatives after N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide and N-hydroxysuccinimide (EDC/NHS) cross-linking. The extent of the incorporation of different amounts and different numbers of active moieties of amine-terminated PEG systems into the collagen scaffolds was evaluated using ninhydrin assay, Fourier transform infrared spectrophotometry (FTIR), collagenase degradation assay, denaturation temperature measurements, and in vitro cell studies. A 3% 8-arm amine-terminated PEG was found to be the minimum required effective concentration to functionalize EDC/NHS stabilized collagen scaffolds. EDC/NHS stabilized scaffolds treated with 3% 8-arm amine-terminated PEG exhibited significantly improved denaturation temperature and resistance to collagenase degradation over non-cross-linked scaffolds (p < 0.002). Biological evaluation using 3T3 cells demonstrated that the produced scaffolds facilitated maintenance of the cells' morphology, metabolic activity, and ability to proliferate in vitro. Overall, our results indicate that amine-terminated PEG systems can be used as means to enhance the functionality of collagenous structures.

Perspective on biomaterials used in the surgical treatment of morbid obesity

Morbid obesity is defined as having a body mass index greater than or equal to 40.0 kg m(-2), or 37.0 kg m(-2) with comorbidities. Bariatric surgery remains the most effective treatment for morbid obesity. Bariatric procedures such as sleeve gastrectomy, vertical banded gastroplasty and adjustable gastric banding all generate excess body-weight loss typically over 3-5 years. The biomaterials used during these procedures, namely silicone, polypropylene, expanded polytetrafluoroethylene and titanium, are all non-degradable biomaterials. Hence, their presence in vivo exceeds the functional requirement of an implant to treat morbid obesity. Accordingly, research into non-invasive and reversible surgical procedures has increased, particularly in light of the dramatic increase in paediatric obesity. Tissue engineering is an alternative approach to treat morbid obesity, as it incorporates both engineering and biological principles into the design and development of an implant to surgically treat morbid obesity. It is hypothesized that a biodegradable polymer to treat morbid obesity could be developed to effectively promote excess weight loss. The aim of this review is to discuss morbid obesity with regards to its aetiology, prevalence and current modalities of treatment. Specifically, the shortcomings of the biomaterials currently used to surgically treat morbid obesity shall be reviewed, and alternative biomaterials shall be proposed.

Enhancing amine terminals in an amine-deprived collagen matrix

Collagen, though widely used as a core biomaterial in many clinical applications, is often limited by its rapid degradability which prevents full exploitation of its potential in vivo. Polyamidoamine (PAMAM) dendrimer, a highly branched macromolecule, possesses versatile multiterminal amine surface groups that enable them to be tethered to collagen molecules and enhance their potential. In this study, we hypothesized that incorporation of PAMAM dendrimer in a collagen matrix through cross-linking will result in a durable, cross-linked collagen biomaterial with free -NH 2 groups available for further multi-biomolecular tethering. The aim of this study was to assess the physicochemical properties of a G1 PAMAM cross-linked collagen matrix and its cellular sustainability in vitro. Different amounts of G1 PAMAM dendrimer (5 or 10 mg) were integrated into bovine-derived collagen matrices through a cross-linking process, mediated by 5 or 25 mM 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) in 5 mM N-hydroxysuccinimide (NHS) and 50 mM 2-morpholinoethane sulfonic acid buffer at pH 5.5. The physicochemical properties of resultant matrices were investigated with scanning electron microscopy (SEM), collagenase degradation assay, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectra, and ninhydrin assay. Cellular sustainability of the matrices was assessed with Alamar Blue assay and SEM. There was no significant difference in cellular behavior between the treated and nontreated groups. However, the benefit of incorporating PAMAM in the cross-linking reaction was limited when higher concentrations of either agent were used. These results confirm the hypothesis that PAMAM dendrimer can be incorporated in the collagen cross-linking process in order to modulate the properties of the resulting cross-linked collagen biomaterial with free -NH 2 groups available for multi-biomolecular tethering.

Buttressing staples with cholecyst-derived extracellular matrix (CEM) reinforces staple lines in an ex vivo peristaltic inflation model

BACKGROUND

Staple line leakage and bleeding are the most common problems associated with the use of surgical staplers for gastrointestinal resection and anastomotic procedures. These complications can be reduced by reinforcing the staple lines with buttressing materials. The current study reports the potential use of cholecyst-derived extracellular matrix (CEM) in non-crosslinked (NCEM) and crosslinked (XCEM) forms, and compares their mechanical performance with clinically available buttress materials [small intestinal submucosa (SIS) and bovine pericardium (BP)] in an ex vivo small intestine model.

METHODS

Three crosslinked CEM variants (XCEM0005, XCEM001, and XCEM0033) with different degree of crosslinking were produced. An ex vivo peristaltic inflation model was established. Porcine small intestine segments were stapled on one end, using buttressed or non-buttressed surgical staplers. The opened, non-stapled ends were connected to a peristaltic pump and pressure transducer and sealed. The staple lines were then exposed to increased intraluminal pressure in a peristaltic manner. Both the leak and burst pressures of the test specimens were recorded.

RESULTS

The leak pressures observed for non-crosslinked NCEM (137.8 +/- 22.3 mmHg), crosslinked XCEM0005 (109.1 +/- 14.1 mmHg), XCEM001 (150.1 +/- 16.0 mmHg), XCEM0033 (98.8 +/- 10.5 mmHg) reinforced staple lines were significantly higher when compared to non-buttressed control (28.3 +/- 10.8 mmHg) and SIS (one and four layers) (62.6 +/- 11.8 and 57.6 +/- 12.3 mmHg, respectively) buttressed staple lines. NCEM and XCEM were comparable to that observed for BP buttressed staple lines (138.8 +/- 3.6 mmHg). Only specimens with reinforced staple lines were able to achieve high intraluminal pressures (ruptured at the intestinal mesentery), indicating that buttress reinforcements were able to withstand pressure higher than that of natural tissue (physiological failure).

CONCLUSIONS

These findings suggest that the use of CEM and XCEM as buttressing materials is associated with reinforced staple lines and increased leak pressures when compared to non-buttressed staple lines. CEM and XCEM were found to perform comparably with clinically available buttress materials in this ex vivo model.