Synthesis, characterization, and DNA adsorption studies of ampholytic model conetworks based on cross-linked star copolymers

Preparation and properties of pH-sensitive cationic starch nanoparticles

Environmentally friendly and outstanding pH responsiveness cationic starch nanoparticles (CSNP) were prepared through ethanol precipitation from pH-sensitive starch, which preparation of cationic starch (CS) by grafting copolymerization with dimethylaminoethyl methacrylate (DMAEMA). In this work, CSNP showed a nanometer size and regular sphere, highly free-flowing molecular chains, and outstanding pH responsiveness which was proved by the high stability of its stabilized emulsion through 6 emulsification/ demulsification transition. The result of the SEM and particle size distribution indicated that the size of the CSNP-0 was about 800 nm, and decreased with the DMAEMA increased. Moreover, the CSNP-stabilized emulsion was stable at pH = 7 and pH = 12. However, this emulsion exhibited breakage at pH = 2. In addition, the CSNP-stabilized Pickering emulsion achieved an emulsification/demulsification switching by cycling the pH at least 6 times, during which the average droplet size gradually increased. At pH ≥ 7, the emulsions exhibit shear thinning behavior.

Dual pH and thermoresponsive alternating polyampholytes in alcohol/water solvent mixtures

Polyampholytes consist of alternating opposite charges were synthesized by alternating RAFT (co)polymerization of cationic and anionic monomers and their pH dependent thermoresponsive behavior in water and alcohol/water solvent mixtures is reported.

Hydrophobically Modified Polycarboxybetaine: From Living Radical Polymerization to Self-Assembly

Polybetaines have received widespread attention due to their smart response properties and structures which resemble biological polymers like peptides and DNA. However, few studies have focused on the controlled synthesis and self-assembly of hydrophobically modified polybetaines due to the difficulty of synthesizing these materials. We report the first molecular weight-controlled synthesis of hydrophobically modified polycarboxybetaines (HMPCB). Poly(dodecyl grafted aminocrotonate -methacrylic acid) (P(DACRO-MAA)) was synthesized via the reversible addition-fragmentation chain-transfer (RAFT) polymerization approach. The two different tautomers of the monomer were also successfully identified and separated via thin layer chromatography (TLC) and column chromatography, making it possible to obtain pure polycarboxybetaine via RAFT synthesis. Both the successfully separated enamine form of the monomer and the resulting polycarboxybetaine were confirmed via FTIR and NMR. The polycarboxybetaine was found to have a low polydispersity (PDI) of 1.214, and its molecular weight was determined as 70590 g/mol via gel permeation chromatography (GPC) measurements. Spherical, rodlike, and fractal assembled structures for the P(DACRO-MAA) were observed with pH change using TEM, zeta sizer, and dynamic light scattering (DLS). The unique self-assembled structures of HMPCB synthesized via RAFT provide an opportunity to understand fundamental polymer science and can be engineered for broad applications.

pH-Triggered Release from Polyamide Microcapsules Prepared by Interfacial Polymerization of a Simple Diester Monomer

The majority of current pH-triggered release systems is designed to respond to either low or high pH. Encapsulants based on polyampholytes are an example of materials that can respond to both acidic and basic pH. However, polyampholyte-based encapsulants generally possess a low loading capacity and have difficulty retaining their small-molecule cargo. The current work utilizes interfacial polymerization between polyamines and a pyromellitic diester diacid chloride to form high capacity "liquid core-shell" polyamide microcapsules that are stable in a dry or nonpolar environment but undergo steady, controlled release at pH 7.4 and accelerated release at pH 5 and pH 10. The rate of release can be tuned by adjusting the amine cross-linker feed ratio, which varies the degree of cross-linking in the polymer shell. The thin-shell microcapsule exhibited suitable barrier properties and tunable dual acid/base-triggered release, with applications in a wide range of pH environments.

pH sensitive amphiphilic conetworks based on end-group cross-linking of polydimethylsiloxane pentablock copolymer and polymethylhydrosiloxane

A series of pH-responsive amphiphilic conetworks were synthesized through cross-linking of well-defined amphiphilic pentablock copolymers via atom transfer radical polymerization.

UCST behavior of polyampholytes based on stoichiometric RAFT copolymerization of cationic and anionic monomers

Polyampholytes with controlled equimolar ratio of charges were synthesized by reversible addition–fragmentation chain transfer (RAFT) copolymerization of cationic and anionic monomers and their UCST behavior is reported.

Photocrosslinkable chitosan based hydrogels for neural tissue engineering

Hydrogel based scaffolds for neural tissue engineering can provide appropriate physico-chemical and mechanical properties to support neurite extension and facilitate transplantation of cells by acting as 'cell delivery vehicles'. Specifically, in situ gelling systems such as photocrosslinkable hydrogels can potentially conformally fill irregular neural tissue defects and serve as stem cell delivery systems. Here, we report the development of a novel chitosan based photocrosslinkable hydrogel system with tunable mechanical properties and degradation rates. A two-step synthesis of amino-ethyl methacrylate derivitized, degradable, photocrosslinkable chitosan hydrogels is described. When human mesenchymal stem cells were cultured in photocrosslinkable chitosan hydrogels, negligible cytotoxicity was observed. Photocrosslinkable chitosan hydrogels facilitated enhanced neurite differentiation from primary cortical neurons and enhanced neurite extension from dorsal root ganglia (DRG) as compared to agarose based hydrogels with similar storage moduli. Neural stem cells (NSCs) cultured within photocrosslinkable chitosan hydrogels facilitated differentiation into tubulin positive neurons and astrocytes. These data demonstrate the potential of photocrosslinked chitosan hydrogels, and contribute to an increasing repertoire of hydrogels designed for neural tissue engineering.

End-linked, amphiphilic, degradable polymer conetworks: synthesis by sequential atom transfer radical polymerization using a bifunctional, cleavable initiator

End-linked amphiphilic conetworks prepared using an ATRP bifunctional, bis(hemiacetal ester) initiator were hydrolyzed by HCl, yielding novel amphiphilic star copolymers.

Exploring N-imidazolyl-O-carboxymethyl chitosan for high performance gene delivery

Chitosan shows good biocompatibility and biodegradability, but the poor water solubility and low transfection efficiency hinder its applications as a gene delivery vector. We here report the detailed synthesis and characterization of a novel ampholytical chitosan derivative, N-imidazolyl-O-carboxymethyl chitosan (IOCMCS), used for high performance gene delivery. After chemical modification, the solubility of the resulting polymer is enhanced, and the polymer is soluble in a wide pH range (4-10). Gel electrophoresis study reveals the strong binding ability between plasmid DNA and the IOCMCS. Moreover, the IOCMCS does not induce remarkable cytotoxicity against human embryonic kidney (HEK293T) cells. The cell transfection results with HEK293T cells using the IOCMCS as gene delivery vector demonstrate the high transfection efficiency, which is dependent on the degree of imidazolyl substitution. Therefore, the IOCMCS is a promising candidate as the DNA delivery vector in gene therapy due to its high solubility, high gene binding capability, low cytotoxicity, and high gene transfection efficiency.

Polyampholyte-Wrapped Carbon Nanotubes: Preparation and Internalization by Embryonic Fibroblast Cells

The cytotoxicity and cellular uptake of carbon nanotubes (CNTs) has recently attracted considerable interest because of the issue of biosphere-nanomaterial interactions. The biocompatibility of CNTs is determined by the metal impurities in the CNTs, the size of the CNTs and the CNT dispersion states; in particular, the type of surface modifications on the CNTs affects how they interact with cells and determines their cytotoxicity and cellular uptake. In this study, biocompatible single-walled carbon nanotubes (SWNTs) wrapped with a water-soluble copolymer, poly[2-(dimethylamino)ethyl methacrylate-co-methacrylic acid] (PDM), were prepared. We report that these SWNTs have enhanced water dispersibility and cellular internalization but no significant cytotoxic activity against mouse embryonic fibroblast NIH-3T3 cells.

Development of a novel endosomolytic diblock copolymer for siRNA delivery

The gene knockdown activity of small interfering RNA (siRNA) has led to their use as target validation tools and as potential therapeutics for a variety of diseases. The delivery of these double-stranded RNA macromolecules has proven to be challenging, however, and in many cases, is a barrier to their deployment. Here we report the development of a new diblock copolymer family that was designed to enhance the systemic and intracellular delivery of siRNA. These diblock copolymers were synthesized using the controlled reversible addition fragmentation chain transfer polymerization (RAFT) method and are composed of a positively-charged block of dimethylaminoethyl methacrylate (DMAEMA) to mediate siRNA condensation, and a second endosomal-releasing block composed of DMAEMA and propylacrylic acid (PAA) in roughly equimolar ratios, together with butyl methacylate (BMA). A related series of diblock compositions were characterized, with the cationic block kept constant, and with the ratio of DMAEMA and PAA to BMA varied. These carriers became sharply hemolytic at endosomal pH regimes, with increasing hemolytic activity seen as the percentage of BMA in the second block was systematically increased. The diblock copolymers condensed siRNA into 80-250 nm particles with slightly positive Zeta potentials. SiRNA-mediated knockdown of a model protein, namely glyceraldehyde 3-phosphate dehydrogenase (GAPDH), in HeLa cells generally followed the hemolytic activity trends, with the most hydrophobic second block (highest BMA content) exhibiting the best knockdown. This pH-responsive carrier designed to mediate endosomal release shows significant promise for the intracellular delivery of siRNA.

Extraction of Azo Dye Molecules from Aqueous Solution using Polyamidoamine Dendrimer Based Polymeric Network

Synthesis of novel polyamidoamine (PAMAM) dendrimer based network polymer 2 based on the reaction between an amine-terminated PAMAM dendrimer 1 (G = 3, ethylenediamine core) and butanediol diglycidylether has been achieved. The divergent approach has been employed for the synthesis of the PAMAM dendrimer 1. This polyamidoamine (PAMAM) dendrimer based network polymer 2 has been successfully characterised by means of FT-IR spectroscopy and elemental analyses and the extraction of methyl orange dye molecules from aqueous solution has been investigated.

Acid-labile core cross-linked micelles for pH-triggered release of antitumor drugs

Micelles of a model amphiphilic block copolymer, poly(hydroxyethyl acrylate)-block-poly(n-butyl acrylate) (PHEA-b-PBA), synthesized via the RAFT polymerization were cross-linked by copolymerization of a degradable cross-linker from the living RAFT-end groups of PBA chains, yielding a cross-linked core without affecting significantly the original micelle size. The cross-linker incorporation into the micelles was evidenced via physicochemical analysis of the copolymer unimers formed upon acidic cleavage of the cross-linked micelles. High doxorubicin loading capacities (60 wt %) were obtained. Hydrolysis of less than half of the cross-links in the core was found to be sufficient to release doxorubicin faster at acidic pH compared to neutral pH. The system represents the first example of core-cross-linked micelles that can be destabilized (potentially both above and below CMC) by the pH-dependent cleavage of the cross-links and the subsequent polarity change in the core to enable the release of hydrophobic drugs entrapped inside the micelle.