Electron Density Mapping of Triblock Copolymers Associated with Model Biomembranes: Insights into Conformational States and Effect on Bilayer Structure

Interaction of Macromolecular Chain with Phospholipid Membranes in Solutions: A Dissipative Particle Dynamics Simulation Study

The interaction between macromolecular chains and phospholipid membranes in aqueous solution was investigated using dissipative particle dynamics simulations. Two cases were considered, one in which the macromolecular chains were pulled along parallel to the membrane surfaces and another in which they were pulled vertical to the membrane surfaces. Several parameters, including the radius of gyration, shape factor, particle number, and order parameter, were used to investigate the interaction mechanisms during the dynamics processes by adjusting the pulling force strength of the chains. In both cases, the results showed that the macromolecular chains undergo conformational transitions from a coiled to a rod-like structure. Furthermore, the simulations revealed that the membranes can be damaged and repaired during the dynamic processes. The role of the pulling forces and the adsorption interactions between the chains and membranes differed in the parallel and perpendicular pulling cases. These findings contribute to our understanding of the interaction mechanisms between macromolecules and membranes, and they may have potential applications in biology and medicine.

Effect of Poloxamer Binding on the Elasticity and Toughness of Model Lipid Bilayers

Poloxamers, also known by their trade name, Pluronics, are known to mitigate damage to cellular membranes. However, the mechanism underlying this protection is still unclear. We investigated the effect of poloxamer molar mass, hydrophobicity, and concentration on the mechanical properties of giant unilamellar vesicles, composed of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine, using micropipette aspiration (MPA). Properties including the membrane bending modulus (κ), stretching modulus (K), and toughness are reported. We found that poloxamers tend to decrease K, with an impact largely dictated by their membrane affinity, i.e., both a high molar mass and less hydrophilic poloxamers depress K at lower concentrations. However, a statistically significant effect on κ was not observed. Several poloxamers studied here showed evidence of membrane toughening. Additional pulsed-field gradient NMR measurements provided insight into how polymer binding affinity connects to the trends observed by MPA. This model study provides important insights into how poloxamers interact with lipid membranes to further understanding of how they protect cells from various types of stress. Furthermore, this information may prove useful for the modification of lipid vesicles for other applications, including use in drug delivery or as nanoreactors.

Different effects of two Poloxamers (L61 and F68) on the conductance of bilayer lipid membranes

The integral conductance of planar lipid bilayer membranes in the presence of two Poloxamers (Pluronics) L61 and F68 with the same lengths of hydrophobic poly(propylene oxide) blocks and the different lengths of hydrophilic poly(ethylene oxide) blocks increases with an increase in the concentration of both Pluronics; however, the shape of the conductance-concentration curves is super linear for L61 and sublinear for F68. In the presence of both Pluronics, rare discrete current jumps are observed against the background of continuous current. At high concentrations, the I-V curves of membranes with both L61 and F68 became nonlinear at sufficiently low voltages but differed significantly. At voltages greater than 50 mV, the conductance of membranes with L61 increased sharply and quantized jumps were observed toward higher conductance, which could be interpreted as the appearance of additional pores. On the contrary, the conductance of membranes with F68 decreased and quantized jumps to lower conductance were observed, which could be interpreted as blocking of already existing pores. We attributed the differences in the conductance-concentration and I-V curves of these two Pluronics to their different effects on the dynamics of membrane hydration and, accordingly, on the probability of formation of conducting pores.

Effect of Bottlebrush Poloxamer Architecture on Binding to Liposomes

Poloxamers─triblock copolymers consisting of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO)─have demonstrated cell membrane stabilization efficacy against numerous types of stress. However, the mechanism responsible for this stabilizing effect remains elusive, hindering engineering of more effective therapeutics. Bottlebrush polymers have a wide parameter space and known relationships between architectural parameters and polymer properties, enabling their use as a tool for mechanistic investigations of polymer-lipid bilayer interactions. In this work, we utilized a versatile synthetic platform to create novel bottlebrush analogues to poloxamers and then employed pulsed-field-gradient NMR and an in vitro osmotic stress assay to explore the effect of bottlebrush architectural parameters on binding to, and protection of, model phospholipid bilayers. We found that the binding affinity of a bottlebrush poloxamer (BBP) (B-E₁₀⁴³P₅¹⁵, M_n ≈ 26 kDa) is about 3 times higher than a linear poloxamer with a similar composition and number of PPO units (L-E₉₃P₅₄E₉₃, M_n ≈ 11 kDa). Furthermore, BBP binding is sensitive to overall molecular weight, side-chain length, and architecture (statistical versus block). Finally, all tested BBPs exhibit a protective effect on cell membranes under stress at sub-μM concentrations. As the factors controlling membrane affinity and protection efficacy of bottlebrush poloxamers are not understood, these results provide important insight into how they adhere to and stabilize a lipid bilayer surface.

Membrane stabilization versus perturbation by aromatic monoamine-modified γ-PGA for cryopreservation of human RBCs with high intracellular trehalose

As a nonreducing disaccharide, trehalose can be used as a biocompatible cryoprotectant for solvent-free cell cryopreservation, but the membrane-impermeability limits its cryoprotective efficiency. Herein, a series of aromatic monoamines with a 1-4 methylene spacer were grafted onto γ-poly(glutamic acid) (γ-PGA) for promoting intracellular trehalose uptake in human red blood cells (hRBCs) via membrane perturbation. The self-assembled nanoparticles of the obtained amphiphilic γ-PGA could be adsorbed on the cell membrane by the hydrophobic interaction to disturb the lipid arrangement and increase the membrane permeability of trehalose under hypertonic conditions. Results suggested that the intracellular trehalose could be enhanced progressively with the methylene spacer length, significantly increasing to 75.1 ± 0.7 mM by incubating hRBCs in 0.8 M trehalose containing phenylbutylamine-grafted γ-PGA at 4 °C for 24 h. Meanwhile, the other three polymers exhibited membrane stabilization in addition to improved intracellular trehalose, maintaining the membrane integrity during cryopreservation to achieve high cryosurvival. Molecular dynamics simulation further confirmed that defects could be formed by interaction of the above four amphiphilic polymers on the modeled phospholipid bilayer. It was believed that glycerol-free cryopreservation of human cells could be realized by using trehalose as the biocompatible cryoprotectant, and membrane stabilization can be a compensatory approach to membrane perturbation during impermeable biomolecule delivery.

Development and Optimization of Hyaluronic Acid-Poloxamer In-Situ Gel Loaded with Voriconazole Cubosomes for Enhancement of Activity against Ocular Fungal Infection

Fungal eye infections are largely disseminated, especially in developing countries where they may leave over half a million people blind per year. The current study aims to boost the voriconazole antifungal efficiency via loading it as cubosomes (VZ-Cub) into hyaluronic acid and poloxamer-based ocular in situ gel. VZ-Cub were fabricated applying Box-Behnken design and employing phytantriol, poloxamer F127, and VZ amounts as independent variables. The produced nano vesicles were evaluated for the dependent variables of particle size (PS), entrapment efficiency (EE%), and transcorneal steady-state flux (Jss) of the VZ, and, the obtained optimal VZ-Cub was loaded into an in situ gel base to enhance its ocular residence time. The in situ gel formulation was tested for its gelation temperature, drug release behavior, transcorneal permeation effects, and antifungal activity. The optimized VZ-Cub consisted of 100 mg of phytantriol, 60 mg of poloxamer F127, and 21 mg of VZ. This formulation led to a minimum PS of 71 nm, an EE% of 66%, Jss value of 6.5 µg/(cm²·min), and stability index of 94 ± 2%. The optimized VZ-Cub-loaded in situ gel released 84% VZ after 12 h and yielded a 4.5-fold increase in drug permeation compared with the VZ aqueous dispersion. The antifungal activity, which was obtained by measuring the fungal growth inhibition zones, revealed that the VZ-Cub-loaded in situ gel formulation had a 3.89-fold increase in antifungal activity compared with the VZ dispersion. In summary, an ocular in situ gel loaded with VZ-Cub could be an effective novel nano-paradigm with enhanced transcorneal permeation and antifungal properties.

Lipid Membrane Binding and Cell Protection Efficacy of Poly(1,2-butylene oxide)-b-poly(ethylene oxide) Copolymers

Poloxamers consisting of poly(ethylene oxide) (PEO) and poly(propylene oxide) segments can protect cell membranes against various forms of stress. We investigated the role of the hydrophobic block chemistry on polymer/membrane binding and cell membrane protection by comparing a series of poly(butylene oxide)-b-PEO (PBO-b-PEO) copolymers to poloxamer analogues, using a combination of pulsed-field-gradient (PFG) NMR experiments and a lactate dehydrogenase (LDH) cell assay. We found that the more hydrophobic PBO-b-PEO copolymers bound more significantly to model liposomes composed of 1-palmitol-2-oleoyl-glycero-3-phosphocholine (POPC) compared to poly(propylene oxide) (PPO)/PEO copolymers. However, both classes of polymers performed similarly when compared by an LDH assay. These results present an important comparison between polymers with similar structures but with different binding affinities. They also provide mechanistic insight as enhanced polymer/lipid membrane binding did not directly translate to increased cell protection in the LDH assay, and therefore, additional factors need to be considered when trying to achieve greater membrane protection efficacy.

Rosuvastatin calcium-based novel nanocubic vesicles capped with silver nanoparticles-loaded hydrogel for wound healing management: optimization employing Box-Behnken design: in vitro and in vivo assessment

Chronic wounds are a serious problem that could cause severe morbidity and even death. The ability of statins including rosuvastatin calcium (RVS) to enhance wound healing was well reported. However, RVS is poorly soluble and has low bioavailability. Thus, this study aimed to prepare and evaluate RVS-loaded nanocubics to enhance its skin performance. In addition, silver nanoparticles (AgNPs) exhibited potent antimicrobial activity, thus, the optimum RVS-loaded nanocubics was capped with AgNPs to evaluate its effect in wound management. Box-Behnken design was adopted to prepare RVS nanocubics. The design investigated the effect of lecithin, poloxamer 407 concentrations and hydration time on vesicle size, zeta potential (ZP), entrapment efficiency (EE%) and in vitro drug release%. Optimum formulation capped with AgNPs was incorporated into a gel base and examined for wound healing efficiency using different pharmacological tests in rats. Nanocubics have shown a mean diameter between 167.2 ± 7.8 and 408 ± 18.4 nm, ZP values ranging from -20.9 ± 1.9 to -53.5 ± 4 mV, EE% equivocated between 31.6 ± 1.4 and 94.4 ± 8.6 and drug release after 12 h between 17.9 ± 1.9 and 68.0 ± 4.0%. The histopathological studies and serum tumour necrosis factor alpha (TNF-α) and interleukin-1β (IL-1β) levels confirmed the greater efficacy of RVS nanocubics capped with AgNPs gel in wound healing when compared with gentamicin ointment. RVS-loaded nanocubic vesicles and AgNPs-loaded hydrogel could be considered as a promising platform to enhance the wound healing and tissue repair processes.

A thermodynamic study of F108 and F127 block copolymer interactions with liposomes at physiological temperature

The interactions of egg yolk phosphatidylcholine liposomes with F108 and F127 triblock copolymers, in the monomer state, were analyzed by isothermal titration calorimetry (ITC) at 37 °C. According to the results, the critical micelle concentration was determined to be 0.4 and 0.04 wt.% for F108 and F127, respectively, by surface tension at 37 °C. According to the results, liposomes/poloxamers were not favoured energetically, since endothermic interactions were observed. However, positive changes in entropy promoted a spontaneous process. F127 had a greater partition coefficient (51.97 ± 1.77 × 10⁴), stronger affinity, than F108 (8.19 ± 0.37 × 10⁴) towards the vesicle lipid bilayer due to its larger hydrophobic block. After the ITC experiments, an increased vesicle size (within about 1-3 nm average) by dynamic light scattering and the formation of bilayer discs by electron microscopy (EM) was observed at low copolymer concentrations (0.57 mol% of F108 and 1.01 mol% of F127). The EM and ITC results confirmed the intimate association of the copolymers with the membrane instead of being simply absorbed onto the bilayer surface. Our results indicate that the temperature of the system (37 °C), the copolymer concentration and hydrophobic chain length are important factors for the interaction of poloxamers with lipid bilayers and the stability of liposomes.

Spatial Distribution of PEO-PPO-PEO Block Copolymer and PEO Homopolymer in Lipid Bilayers

Maintaining the integrity of cell membranes is indispensable for cellular viability. Poloxamer 188 (P188), a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer with a number-average molecular weight of 8700 g/mol and containing 80% by mass PEO, protects cell membranes from various external injuries and has the potential to be used as a therapeutic agent in diverse applications. The membrane protection mechanism associated with P188 is intimately connected with how this block copolymer interacts with the lipid bilayer, the main component of a cell membrane. Here, we report the distribution of P188 in a model lipid bilayer comprising 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) using neutron reflectivity (NR) and atomic force microscopy (AFM). We also investigated the association of a PEO homopolymer (PEO8.4K; M_n = 8400 g/mol) that does not protect living cell membranes. These experiments were conducted following incubation of a 4.5 mmol/L polymer solution in a buffer that mimics physiological conditions with supported POPC bilayer membranes followed by washing with the aqueous medium. In contrast to previous reports, which dealt with P188 and PEO in salt-free solutions, both P188 and PEO8.4K penetrate into the inner portion of the lipid bilayer as revealed by NR, with approximately 30% by volume occupancy across the membrane without loss of bilayer structural integrity. These results indicate that PEO is the chemical moiety that principally drives P188 binding to bilayer membranes. No defects or phase-separated domains were observed in either P188- or PEO8.4K-incubated lipid bilayers when examined by AFM, indicating that polymer chains mingle homogeneously with lipid molecules in the bilayer. Remarkably, the breakthrough force required for penetration of the AFM tip through the bilayer membrane is unaffected by the presence of the large amount of P188 and PEO8.4K.

Influence of Cholesterol and Bilayer Curvature on the Interaction of PPO-PEO Block Copolymers with Liposomes

Interactions of nonionic poly(ethylene oxide)- b-poly(propylene oxide) (PEO-PPO) block copolymers, known as Pluronics or poloxamers, with cell membranes have been widely studied for a host of biomedical applications. Herein, we report how cholesterol within phosphatidylcholine (POPC) lipid bilayer liposomes and bilayer curvature affects the binding of several PPO-PEO-PPO triblocks with varying PPO content and a tPPO-PEO diblock, where t refers to a tert-butyl end group. Pulsed-field-gradient NMR was employed to quantify the extent of copolymer associated with liposomes prepared with cholesterol concentrations ranging from 0 to 30 mol % relative to the total content of POPC and cholesterol and vesicle extrusion radii of 25, 50, or 100 nm. The fraction of polymer bound to the liposomes was extracted from NMR data on the basis of the very different mobilities of the bound and free polymers in aqueous solution. Cholesterol concentration was manipulated by varying the molar percentage of this sterol in the POPC bilayer preparation. The membrane curvature was varied by adjusting the liposome size through a conventional pore extrusion technique. Although the PPO content significantly influences the overall amount of block copolymer adsorbed to the liposome, we found that polymer binding decreases with increasing cholesterol concentration in a universal fashion, with the fraction of bound polymer dropping 10-fold between 0 and 30 mol % cholesterol relative to the total content of POPC and cholesterol. Increasing the bilayer curvature (decreasing the radius of the liposome) in the absence of cholesterol increases polymer binding between 2- and 4-fold over the range of liposome sizes studied. These results demonstrate that cholesterol plays a dominant role, and bilayer curvature has a less significant impact as the curvature decreases, on polymer-membrane association.

Multi-stimuli responsive tetra-PPO60-PEO20 ethylene diamine block copolymer enables pH, temperature, and solvent regulation of Au nanoparticle composite plasmonic response

Dynamic plasmonic tuning of Au NP organization through pH and temperature mediated polymer architecture transformation from lamellar to bicontinuous cubic.

Close-packed block copolymer micelles induced by temperature quenching

Close-packed structures of uniformly sized spheres are ubiquitous across diverse material systems including elements, micelles, and colloidal assemblies. However, the controlled access to a specific symmetry of self-assembled close-packed spherical particles has not been well established. We investigated the ordering of spherical block copolymer micelles in aqueous solutions that was induced by rapid temperature changes referred to as quenching. As a function of quench depth, the quenched self-assembled block copolymer micelles formed three different close-packed structures: face-centered cubic (fcc), random stacking of hexagonal-close-packed layers (rhcp), and hexagonal-close-packed (hcp). The induced hcp and rhcp structures were stable for at least a few weeks when maintained at their quench temperatures, but heating or cooling these hcp and rhcp structures transformed both structures to fcc crystallites with coarsening of the crystal grains, which suggests that these noncubic close-packed structures are intermediate states. Time-resolved scattering experiments prove that the micellar rhcp structures do not originate from the rapid growth of competing close-packed structures. We speculate that the long-lived metastable hcp and rhcp structures originate from the small size of crystal grains, which introduces a nonnegligible Laplace pressure to the crystal domains. The reported transitions from the less stable hcp to the more stable rhcp and fcc are experimental observations of Ostwald's rule manifesting the transition order of the key close-packed structures in the crystallization of close-packed uniform spheres.

How the Incorporation of Pluronic Block Copolymers Modulates the Response of Lipid Membranes to Mechanical Stress

We employ atomistic molecular dynamics simulations to investigate the effect that the incorporation of the nonionic amphiphilic copolymer known as Pluronic L64 has on the mechanical stability of a DPPC membrane. The simulations reveal that the incorporation of the polymer chains leads to membranes that can sustain increasing mechanical stresses. Analysis of mechanical, structural, and dynamic properties of the membrane shows that the polymer chains interact strongly with the lipids in the vicinity, restraining their mobility and imparting better mechanical stability to the membrane. The hybrid membranes under tension remain thicker, more ordered, and stiffer in comparison to their lipid analogues. Trans-bilayer lipid movements (flip-flop) are observed and appear to be triggered by the presence of the polymer chains. A careful analysis of the pore formation under high tensions reveals two distinctive mechanisms that depend on the distribution of the hydrophilic polymer blocks in the bilayer. Finally, the rate of growth of the formed membrane defects is slowed down in the presence of polymers. These findings show that Pluronic block copolymers could be exploited for the formation of optimized hybrid nanodevices with controlled elastic and dynamic properties.

All-Atom Molecular Dynamics-Based Analysis of Membrane-Stabilizing Copolymer Interactions with Lipid Bilayers Probed under Constant Surface Tensions

An all-atom phospholipid bilayer and triblock copolymer model was developed for molecular dynamics (MD) studies. These were performed to investigate the mechanism of interaction between membrane-stabilizing triblock copolymer P188 and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) lipid bilayers under applied lateral surface tension (γ) to model membrane mechanical stress. Results showed that P188 insertion is driven by the hydrophobic poly(propylene oxide) (PPO) core and dependent on bilayer area per lipid. Moreover, insertion of P188 increased the bilayer's resistance to mechanical rupture, as observed by a significant increase in the absolute lateral pressure required to disrupt the bilayer. To further investigate the specific chemical features of P188 underlying membrane stabilizer function, a series of MD simulations with triblock copolymers of the same class as P188 but of varying chemical composition and sizes were performed. Results showed that triblock copolymer insertion into the lipid bilayer is dependent on overall copolymer hydrophobicity, with higher copolymer hydrophobicity requiring a reduced bilayer area per lipid ratio for insertion. Further analysis revealed that the effect of copolymer insertion on membrane mechanical integrity was also dependent on hydrophobicity. Here, P188 insertion significantly increased the absolute apparent lateral pressure required to rupture the POPC bilayer, thereby protecting the membrane against mechanical stress. In marked contrast, highly hydrophobic copolymers decreased the lateral pressure necessary for membrane rupture and thus rendering the membrane significantly more susceptible to mechanical stress. These new in silico findings align with recent experimental findings using synthetic lipid bilayers and in muscle cells in vitro and mouse models in vivo. Collectively, these data underscore the importance of PEO-PPO-PEO copolymer chemical composition in copolymer-based muscle membrane stabilization in vitro and in vivo. All-atom modeling with MD simulations holds promise for investigating novel copolymers with enhanced membrane interacting properties.

Quantifying Binding of Ethylene Oxide-Propylene Oxide Block Copolymers with Lipid Bilayers

Block copolymers composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) have been widely used in cell membrane stabilization and permeabilization. To explore the mechanism of interaction between PPO-PEO block copolymers and lipid membranes, we have investigated how polymer structure influences the polymer-lipid bilayer association by varying the overall molecular weight, the hydrophobic and hydrophilic block lengths, and the end-group structure systematically, using 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) unilamellar liposomes as model membranes. Pulsed-field-gradient NMR (PFG-NMR) was employed to probe polymer diffusion in the absence and presence of liposomes. The echo decay curves of free polymers in the absence of liposomes are single exponentials, indicative of simple translational diffusion, while in the presence of liposomes, the decays are biexponential, with the slower decay corresponding to polymers bound to liposomes. The binding percentage of polymer to the liposome was quantified by fitting the echo decay curves to a biexponential model. The NMR experiments show that increasing the total molecular weight and hydrophobicity of the polymer can significantly enhance the polymer-lipid bilayer association, as the binding percentage and liposome surface coverage both increase. We hypothesize that the hydrophobic PPO block inserts into the lipid bilayer due to the fact that little molecular exchange between bound and free polymers occurs on the time scale of the diffusion experiments. Additionally, as polymer concentration increases, the liposome surface coverage increases and approaches a limit. These results demonstrate that PFG-NMR is a simple yet powerful method to quantify interactions between polymers and lipid bilayers.

PEO-PPO Diblock Copolymers Protect Myoblasts from Hypo-Osmotic Stress In Vitro Dependent on Copolymer Size, Composition, and Architecture

Poloxamer 188, a triblock copolymer of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), protects cellular membranes from various stresses. Though numerous block copolymer variants exist, evaluation of alternative architecture, composition, and size has been minimal. Herein, cultured murine myoblasts are exposed to the stresses of hypotonic shock and isotonic recovery, and membrane integrity was evaluated by quantifying release of lactate dehydrogenase. Comparative evaluation of a systematic set of PEO-PPO diblock and PEO-PPO-PEO triblock copolymers demonstrates that the diblock architecture can be protective in vitro. Short PPO blocks hinder protection with >9 PPO units needed for protection at 150 μM and >16 units needed at 14 μM. Addition of a tert-butyl end group enhances protection at reduced concentration. When the end group and PPO length are fixed, increasing the PEO length improves protection. This systematic evaluation establishes a new in vitro screening tool for evaluating membrane-sealing amphiphiles and provides mechanistic insight to guide future copolymer design for membrane stabilization in vivo.

Understanding the Interaction of Pluronics L61 and L64 with a DOPC Lipid Bilayer: An Atomistic Molecular Dynamics Study

We investigate the interactions of Pluronics L61 and L64 with a dioleylphosphatidylcholine (DOPC) lipid bilayer by atomistic molecular dynamics simulations using the all-atom OPLS force field. Our results show that the initial configuration of the polymer with respect to the bilayer determines its final conformation within the bilayer. When the polymer is initially placed at the lipid/water interface, we observe partial insertion of the polymer in a U-shaped conformation. On the other hand, when the polymer is centered at the bilayer, it stabilizes to a transmembrane state, which facilitates water transport across the bilayer. We show that membrane thickness decreases while its fluidity increases in the presence of Pluronics. When the polymer concentration inside the bilayer is high, pore formation is initiated with L64. Our results show good agreement with existing experimental data and reveal that the hydrophilic/lipophilic balance of the polymer plays a critical role in the interaction mechanisms as well as in the dynamics of Pluronics with and within the bilayer.

Cascade synthesis of a gold nanoparticle-network polymer composite

The multi-step, cascade synthesis of a self-supporting, hierarchically-structured gold nanoparticle hydrogel composite is described. The composite is spontaneously prepared from a non-covalent, lamellar lyotropic mesophase composed of amphiphiles that support the reactive constituents, a mixture of hydroxyl- and acrylate-end-derivatized PEO117-PPO47-PEO117 and [AuCl4](-). The reaction sequence begins with the auto-reduction of aqueous [AuCl4](-) by PEO117-PPO47-PEO117 which leads to both the production of Au NPs and the free radical initiated polymerization and crosslinking of the acrylate end-derivatized PEO117-PPO47-PEO117 to yield a network polymer. Optical spectroscopy and TEM monitored the reduction of [AuCl4](-), formation of large aggregated Au NPs and oxidative etching into a final state of dispersed, spherical Au NPs. ATR/FT-IR spectroscopy and thermal analysis confirms acrylate crosslinking to yield the polymer network. X-ray scattering (SAXS and WAXS) monitored the evolution of the multi-lamellar structured mesophase and revealed the presence of semi-crystalline PEO confined within the water layers. The hydrogel could be reversibly swollen without loss of the well-entrained Au NPs with full recovery of composite structure. Optical spectroscopy shows a notable red shift (Δλ ∼ 45 nm) in the surface plasmon resonance between swollen and contracted states, demonstrating solvent-mediated modulation of the internal NP packing arrangement.

Chronic Dosing with Membrane Sealant Poloxamer 188 NF Improves Respiratory Dysfunction in Dystrophic Mdx and Mdx/Utrophin-/- Mice

Poloxamer 188 NF (national formulary (NF) grade of P-188) improves cardiac muscle function in the mdx mouse and golden retriever muscular dystrophy models. However in vivo effects on skeletal muscle have not been reported. We postulated that P-188 NF might protect diaphragm muscle membranes from contraction-induced injury in mdx and mdx/utrophin^-/- (dko) muscular dystrophy models. In the first study 7-month old mdx mice were treated for 22 weeks with subcutaneous (s.c.) injections of saline or P-188 NF at 3 mg/Kg. In the second, dkos were treated with saline or P-188 NF (1 mg/Kg) for 8 weeks beginning at age 3 weeks. Prednisone was the positive control in both studies. Respiratory function was monitored using unrestrained whole body plethysmography. P-188 NF treatment affected several respiratory parameters including tidal volume/BW and minute volume/BW in mdx mice. In the more severe dko model, P-188 NF (1 mg/Kg) significantly slowed the decline in multiple respiratory parameters compared with saline-treated dko mice. Prednisone’s effects were similar to those seen with P-188 NF. Diaphragms from P-188 NF or prednisone treated mdx and dko mice showed signs of muscle fiber protection including less centralized nuclei, less variation in fiber size, greater fiber density, and exhibited a decreased amount of collagen deposition. P-188 NF at 3 mg/Kg s.c. also improved parameters of systolic and diastolic function in mdx mouse hearts. These results suggest that P-188 NF may be useful in treating respiratory and cardiac dysfunction, the leading causes of death in Duchenne muscular dystrophy patients.

Modeling the effect of nano-sized polymer particles on the properties of lipid membranes

The interaction between polymers and biological membranes has recently gained significant interest in several research areas. On the biomedical side, dendrimers, linear polyelectrolytes, and neutral copolymers find application as drug and gene delivery agents, as biocidal agents, and as platforms for biological sensors. On the environmental side, plastic debris is often disposed of in the oceans and gets degraded into small particles; therefore concern is raising about the interaction of small plastic particles with living organisms. From both perspectives, it is crucial to understand the processes driving the interaction between polymers and cell membranes. In recent times progress in computer technology and simulation methods has allowed computational predictions on the molecular mechanism of interaction between polymeric materials and lipid membranes. Here we review the computational studies on the interaction between lipid membranes and different classes of polymers: dendrimers, linear charged polymers, polyethylene glycol (PEG) and its derivatives, polystyrene, and some generic models of polymer chains. We conclude by discussing some of the technical challenges in this area and future developments.

Probing the association of triblock copolymers with supported lipid membranes using microcantilevers

Pluronics are a class of amphiphilic triblock copolymers that are known to interact with cellular membranes in interesting ways. The solubility of these triblock copolymers in free lipid membranes can be altered with temperature, allowing the possibility of tuning their membrane insertion. However, for supported lipid membranes, the asymmetric local environment and the strong influence of the solid support can alter the solubility of these triblock copolymers in lipid membranes. Here, we probe the interactions of these copolymers with supported lipid membranes using microcantilevers and fluorescence recovery after photobleaching (FRAP) measurements. We measure the solubility and interactions of triblock copolymers (F68 and F98) in supported lipid bilayers as a function of temperature and the length of the copolymer lipophilic block. A Langmuir isotherm model and a free mean area theory are applied to describe the polymer-lipid interactions at the microcantilever surface, determine association constants, and analyze the effect of triblock copolymers on lateral lipid diffusion.

Reversal of multidrug resistance by the inhibition of ATP-binding cassette pumps employing "Generally Recognized As Safe" (GRAS) nanopharmaceuticals: A review

Pumps of the ATP-binding cassette superfamily (ABCs) regulate the access of drugs to the intracellular space. In this context, the overexpression of ABCs is a well-known mechanism of multidrug resistance (MDR) in cancer and infectious diseases (e.g., viral hepatitis and the human immunodeficiency virus) and is associated with therapeutic failure. Since their discovery, ABCs have emerged as attractive therapeutic targets and the search of compounds that inhibit their genetic expression and/or their functional activity has gained growing interest. Different generations of pharmacological ABC inhibitors have been explored over the last four decades to address resistance in cancer, though clinical results have been somehow disappointing. "Generally Recognized As Safe" (GRAS) is a U.S. Food and Drug Administration designation for substances that are accepted as safe for addition in food. Far from being "inert", some amphiphilic excipients used in the production of pharmaceutical products have been shown to inhibit the activity of ABCs in MDR tumors, emerging as a clinically translatable approach to overcome resistance. The present article initially overviews the classification, structure and function of the different ABCs, with emphasis on those pumps related to drug resistance. Then, the different attempts to capitalize on the activity of GRAS nanopharmaceuticals as ABC inhibitors are discussed.

Cytocompatibility and P-glycoprotein inhibition of block copolymers: structure-activity relationship

Amphiphilic polymeric micelles greatly improve the solubilization and sustained release of hydrophobic drugs and provide a protective environment for the cargo molecules in aqueous media, which favors lower drug administration doses, reduces adverse side effects, and increases blood circulation times and passive targeting to specific cells. These capabilities depend, among other variables, on the structure and composition of the polymer chains. Composition and, in particular, block length have been shown to play an important role in the modification of cellular responses such as drug internalization processes or transduction pathways when polymeric unimer/micelles are in close contact with cells. Here we present a detailed study about the role copolymer structure and composition play on cell viability and cellular response of several cell lines. To do that, more than 30 structurally related copolymers with diblock and triblock architectures containing different hydrophobic blocks and poly(ethylene oxide) as the common hydrophilic unit have been analyzed regarding cytocompatibility and potential as "active" cell response modifiers by testing their influence on the P-gp pump efflux mechanism responsible of multidrug resistance in cancerous cells. An empirical threshold for cell viability could be established at a copolymer EO/POeffective value above ca. 1.5 for copolymers with triblock structure, whereas no empirical rule could be observed for diblocks. Moreover, some of the tested copolymers (e.g., BO12EO227BO12 and EO57PO46EO57 that notably increased and C16EO455C16 that decreased the P-gp ATPase activity) were observed to act as efficient inhibitors of the P-gp efflux pump promoting an enhanced doxorubicin (DOXO) accumulation inside multidrug resistant (MDR) NCI-ADR-RES cells.

Understanding the interaction of block copolymers with DMPC lipid bilayer using coarse-grained molecular dynamics simulations

In this paper, we present a computational model of the adsorption and percolation mechanism of poloxamers (poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymers) across a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayer. A coarse-grained model was used to cope with the long time scale of the percolation process. The simulations have provided details of the interaction mechanism of Pluronics with lipid bilayer. In particular, the results have shown that polymer chains containing a PPO block with a length comparable to the DMPC bilayer thickness, such as P85, tends to percolate across the lipid bilayer. On the contrary, Pluronics with a shorter PPO chain, such as L64 and F38, insert partially into the membrane with the PPO block part while the PEO blocks remain in water on one side of the lipid bilayer. The percolation of the polymers into the lipid tail groups reduces the membrane thickness and increases the area per lipid. These effects are more evident for P85 than L64 or F38. Our findings are qualitatively in good agreement with published small-angle X-ray scattering experiments that have evidenced a thinning effect of Pluronics on the lipid bilayer as well as the role of the length of the PPO block on the permeation process of the polymer through the lipid bilayer. Our theoretical results complement the experimental data with a detailed structural and dynamic model of poloxamers at the interface and inside the lipid bilayer.

Protective effects of nonionic triblock copolymers on bile acid-mediated epithelial barrier disruption

Translocation of bacteria and other luminal factors from the intestine following surgical injury can be a major driver of critical illness. Bile acids have been shown to play a key role in the loss of intestinal epithelial barrier function during states of host stress. Experiments to study the ability of nonionic block copolymers to abrogate barrier failure in response to bile acid exposure are described. In vitro experiments were performed with the bile salt sodium deoxycholate on Caco-2 enterocyte monolayers using transepithelial electrical resistance to assay barrier function. A bisphenol A coupled triblock polyethylene glycol (PEG), PEG 15-20, was shown to prevent sodium deoxycholate-induced barrier failure. Enzyme-linked immunosorbent assay, lactate dehydrogenase, and caspase 3-based cell death detection assays demonstrated that bile acid-induced apoptosis and necrosis were prevented with PEG 15-20. Immunofluorescence microscopic visualization of the tight junctional protein zonula occludens 1 (ZO-1) demonstrated that PEG 15-20 prevented significant changes in tight junction organization induced by bile acid exposure. Preliminary transepithelial electrical resistance-based studies examining structure-function correlates of polymer protection against bile acid damage were performed with a small library of PEG-based copolymers. Polymer properties associated with optimal protection against bile acid-induced barrier disruption were PEG-based compounds with a molecular weight greater than 10 kd and amphiphilicity. The data demonstrate that PEG-based copolymer architecture is an important determinant that confers protection against bile acid injury of intestinal epithelia.

Assembly of reconfigurable one-dimensional colloidal superlattices due to a synergy of fundamental nanoscale forces

We report that triangular gold nanoprisms in the presence of attractive depletion forces and repulsive electrostatic forces assemble into equilibrium one-dimensional lamellar crystals in solution with interparticle spacings greater than four times the thickness of the nanoprisms. Experimental and theoretical studies reveal that the anomalously large d spacings of the lamellar superlattices are due to a balance between depletion and electrostatic interactions, both of which arise from the surfactant cetyltrimethylammonium bromide. The effects of surfactant concentration, temperature, ionic strength of the solution, and prism edge length on the lattice parameters have been investigated and provide a variety of tools for in situ modulation of these colloidal superstructures. Additionally, we demonstrate a purification procedure based on our observations that can be used to efficiently separate triangular nanoprisms from spherical nanoparticles formed concomitantly during their synthesis.

Thermodynamic and physical interactions between novel polymeric surfactants and lipids: toward designing stable polymer-lipid complexes

Surfactant amphiphilic macromolecules (AMs) were complexed with a 1:1 ratio of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), either by a coevaporation (CE) or postaddition (PA) method, to form AM-lipid complexes with enhanced drug delivery applications. By characterizing the surfactant-lipid interactions, these heterogeneous drug delivery systems can be better controlled and engineered for optimal therapeutic outcomes. In this study, the physical interactions between DOPE:DOTAP liposomes and AM surfactants were investigated. Langmuir film balance and isothermal calorimetry studies showed cooperative intermolecular interactions between pure lipids and AM in monolayers and high thermostability of structure formed by the addition of AM micelles to DOTAP:DOPE vesicles in buffer solution respectively. Increasing the AM weight ratio in the complexes via the CE method led to complete vesicle solubilization--from lamellar aggregates, to a mixture of coexisting vesicles and micelles, to mixed micelles. Isothermal calorimetry evaluation of AM-lipid complexes shows that, at higher AM weight ratios, PA-produced complexes exhibit greater stability than complexes at lower AM weight ratios. Similar studies show that AM-lipid complexes produced by the CE methods display stronger interactions between AM-lipid components than complexes produced by the PA method. The results suggest that the PA method produces vesicles with AM molecules associated with its outer leaflet only (i.e., an AM-coated vesicle), while the CE method produces complexes ranging from mixed vesicles to mixed micelle in which the AM-lipid components are more intimately associated. These results will be helpful in the design of AM-lipid complexes as structurally defined, stable, and effective drug delivery systems.

Preferential cellular uptake of amphiphilic macromolecule-lipid complexes with enhanced stability and biocompatibility

Amphiphilic macromolecules (AM) were electrostatically complexed with a 1:1 ratio of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) to form AM-lipid complexes with drug delivery applications. The complexes exist as AM-coated liposomes and their drug delivery properties can be tuned by altering the AM-lipid weight ratio. The complexation and tuning are achieved in a simple, efficient, and scalable manner. The gradual increase in lipid ratios concurrently increased the zeta potential of the complexes, which directly correlates to increased cell uptake of the complexes in vitro with preferential uptake noted in BT-20 carcinoma cells versus normal fibroblasts. Increasing AM content increased complex steric stability in the presence of serum proteins and reduced the inherent cytotoxicity towards fibroblasts in vitro. AM-lipid complexes solubilized paclitaxel and showed drug-mediated, dose-dependent cytotoxicity towards target BT-20 cells in vitro. AM-lipid complexes make good candidates as drug delivery systems due to their tunable zeta potential, steric stability, inherently low cytotoxicity, and ability to load and deliver insoluble chemotherapeutic agents. Significantly, their preferential uptake in a carcinoma cell line over normal cells in vitro demonstrates a unique, passive targeting approach to delivery anti-cancer therapeutics.

Intestinal transport of bis(12)-hupyridone in Caco-2 cells and its improved permeability by the surfactant Brij-35

The objective of the present study was to elucidate the mechanisms of intestinal transport of bis(12)-hupyridone (B12H) to predict its oral bioavailability. The effect of the B12H concentration and the contribution of the drug efflux transporters, P-glycoprotein (P-gp or ABCB1) and multidrug resistance-associated proteins (MRPs or ABCC) on B12H absorption were measured and evaluated using the human intestinal epithelial Caco-2 cell monolayer in the presence of transporter inhibitors. The results indicated that B12H was absorbed in a dose-dependent manner at concentrations ranging from 132 to 264 µM. However, only apical efflux was observed in the directional transport studies for B12H below 88 µM (P(app) (AP-to-BL): virtually zero; P(app) (BL-to-AP): 1.591 ± 0.071 × 10(-5)  cm s(-1) ). P-gp and mixed P-gp/MRP inhibitors significantly increased the absorptive transport (P(app) (AP-to-BL)) to 0.619 ± 0.018 × 10(-5) and 0.608 ± 0.025 × 10(-5)  cm s(-1) , respectively, while decreasing secretory transport (P(app) (BL-to-AP)) by >75%. A multiple-MRP inhibitor, probenecid, increased the P(app) (AP-to-BL) to 0.329 ± 0.015 × 10(-5)  cm s(-1) while decreasing the P(app) (BL-to-AP) by 50%. Another multiple-MRP inhibitor, indomethacin, only modestly decreased the P(app) (BL-to-AP) by ∼30% and had no effect on the absorptive transport (P(app) (AP-to-BL): virtually zero). In addition, the effect of various pharmaceutical excipients (e.g. Pluronic F-68, Tween-80 and Brij-35) on B12H transport was determined and compared. Among them, Brij-35 effectively enhanced B12H absorption at a concentration lower than its critical micelle concentration (CMC, 60 µM). Therefore, Brij-35 can be used as a potential enhancer to improve intestinal absorption of B12H for oral administration.

Inhibition of P-glycoprotein pumps by PEO–PPO amphiphiles: branched versus linear derivatives

Inhibition of the activity of efflux transporters may relevantly improve the chemotherapy of cancer and infectious diseases. Aim: To explore the ability of poloxamines (Tetronic®, X-shaped structure with a central ethylendiamine group and four branches of poly[ethylene oxide]–poly[propylene oxide] [PEO–PPO]) to inhibit the activity of P-glycoprotein (P-gp) on Caco-2 cell monolayers and to elucidate the incidence of the molecular architecture of PEO–PPO block copolymers on the intracellular accumulation of a relevant substrate, doxorubicin, by comparison with poloxamers (Pluronic®, linear triblock copolymers), well-known inhibitors of this efflux transporter. Methods: Both pristine and N-methylated poloxamines displaying a wide range of molecular weights and EO/PO ratios were tested regarding cytocompatibility and accumulation of doxorubicin in Caco-2 monolayers. Verapamil was used as a control. Results: The most active anti-P-gp poloxamines (which enhanced two- to three-fold doxorubicin accumulation compared with verapamil) resulted to be pristine medium-to-high hydrophobic T304, T904, T1301, T901 and T150R1. A notable dependence of the anti-P-gp activity on the copolymer concentration was found. A joint diagram of the inhibitory activity of poloxamers and poloxamines as a function of the effective length of the PPO block is proposed. Conclusion: The anti-P-gp activity is maxima for block copolymers possessing a low-to-medium hydrophilic–lipophilic balance and an ‘effective number’ of PO units ranging from 30 to 50.

Effects of PEO-PPO-PEO triblock copolymers on phospholipid membrane integrity under osmotic stress

The effects of PEO-PPO-PEO triblock copolymers, mainly Poloxamer 188, on phospholipid membrane integrity under osmotic gradients were explored using giant unilamellar vesicles (GUVs). Fluorescence leakage assays showed two opposing effects of P188 on the structural integrity of GUVs depending on the duration of their incubation time. A two-state transition mechanism of interaction between the triblock copolymers and the phospholipid membrane is proposed: an adsorption (I) and an insertion (II) state. While the triblock copolymer in state I acts to moderately retard the leakage, their insertion in state II perturbs the lipid packing, thus increasing the membrane permeability. Our results suggest that the biomedical application of PEO-PPO-PEO triblock copolymers, either as cell membrane resealing agents or as accelerators for drug delivery, is directed by the delicate balance between these two states.