Synthesis, Degradation, and Cytotoxicity of Multiblock Poly(ε-caprolactone urethane)s Containing Gemini Quaternary Ammonium Cationic Groups

Toward regulating biodegradation in stages of polyurethane copolymers with bicontinuous microphase separation

For typical biodegradable polymers, their overall performance almost declines exponentially to the degradation degree, which inevitably leads to a dilemma between the requirements of service life and retention time in the environment (both in vitro and in vivo). It is a great challenge to develop a biodegradable polymeric device with relatively stable performance in service while rapidly degrading out of service. Herein, we demonstrate an effective strategy to control degradation of biodegradable polymers in stages by constructing separated bicontinuous microphases with very different microphase degradation rates. First, polyurethane copolymers (PCL-b-CrP-U) containing two blocks, i.e., semicrystalline poly(ε-caprolactone) (PCL) blocks and amorphous random copolymer blocks (CrP) based on ε-CL and p-dioxanone (PDO), were synthesized. The microscopic morphology of PCL-b-CrP-U is investigated by an alkali-accelerated degradation experiment, which also demonstrates that the chain cleavage-induced crystallization during degradation resulted in a self-reinforcement by forming degradation residues with a scaffold-like morphology. The tensile test shows that PCL-b-CrP-U has excellent mechanical properties (1500% of elongation at break, a tensile strength of about 7.5 MPa, and an elastic modulus of 40.0 MPa). The degradation experiments with artificial pancreatic juice as a working medium reveal that PCL-b-CrP-U samples containing relatively high PDO units exhibit a three-stage degradation, i.e. an induction stage, a steady degradation stage and an accelerated degradation stage. The CrP phase preferentially hydrolyzes to form some microchannels due to its amorphous nature and relatively high hydrophilicity, effectively accelerating the entry of water and enzymes into the inner parts of the sample. Meanwhile, at this stage, those originally amorphous PCL segments gradually crystalize owing to their enhanced chain mobility induced by the chain cleavage, forming a "scaffold"-like structure, which effectively reinforces the sample to resist the damage from external force and therefore guarantees a relatively stable mechanical performance of PCL-b-CrP-U during service. With the further depletion of the CrP phase, the intermediate "scaffold"-like structure is also very beneficial to accelerate the degradation of residues owing to its large specific surface area, which is expected to be beneficial for preventing long-term retention of the implantation devices.

Green Biodegradable Polylactide-Based Polyurethane Triblock Copolymers Reinforced with Cellulose Nanowhiskers

A novel series of biodegradable polylactide-based triblock polyurethane (TBPU) copolymers covering a wide range of molecular weights and compositions were synthesized for potential use in biomedical applications. This new class of copolymers showed tailored mechanical properties, improved degradation rates, and enhanced cell attachment potential compared to polylactide homopolymer. Triblock copolymers, (TB) PL-PEG-PL, of different compositions were first synthesized from lactide and polyethylene glycol (PEG) via ring-opening polymerization in the presence of tin octoate as the catalyst. After which, polycaprolactone diol (PCL-diol) reacted with TB copolymers using 1,4-butane diisocyanate (BDI) as a nontoxic chain extender to form the final TBPUs. The final composition, molecular weight, thermal properties, hydrophilicity, and biodegradation rates of the obtained TB copolymers, and the corresponding TBPUs were characterized using 1H-NMR, GPC, FTIR, DSC, and SEM, and contact angle measurements. Results obtained from the lower molecular weight series of TBPUs demonstrated potential use in drug delivery and imaging contrast agents due to their high hydrophilicity and degradation rates. On the other hand, the higher molecular weight series of TBPUs exhibited improved hydrophilicity and degradation rates compared to PL-homopolymer. Moreover, they displayed improved tailored mechanical properties suitable for utilization as bone cement, or in regeneration medicinal applications of cartilage, trabecular, and cancellous bone implants. Furthermore, the polymer nanocomposites obtained by reinforcing the TBPU3 matrix with 7% (w/w) bacterial cellulose nanowhiskers (BCNW) displayed a ~16% increase in tensile strength, and 330% in % elongation compared with PL-homo polymer.

Anti-Fouling and Anti-Biofilm Performance of Self-Polishing Waterborne Polyurethane with Gemini Quaternary Ammonium Salts

Biofilms are known to be difficult to eradicate and control, complicating human infections and marine biofouling. In this study, self-polishing and anti-fouling waterborne polyurethane coatings synthesized from gemini quaternary ammonium salts (GQAS), polyethylene glycol (PEG), and polycaprolactone diol (PCL) demonstrate excellent antibiofilm efficacy. Their anti-fouling and anti-biofilm performance was confirmed by a culture-based method in broth media, with the biofilm formation factor against Gram-positive (S. aureus) and Gram-negative bacterial strains (E. coli) for 2 days. The results indicate that polyurethane coatings have excellent anti-biofilm activity when the content of GQAS reached 8.5 wt% against S. aureus, and 15.8 wt% against E. coli. The resulting waterborne polyurethane coatings demonstrate both hydrolytic and enzymatic degradation, and the surface erosion enzymatic degradation mechanism enables them with good self-polishing capability. The extracts cyto-toxicity of these polyurethane coatings and degradation liquids was also systematically studied; they could be degraded to non-toxic or low toxic compositions. This study shows the possibility to achieve potent self-polishing and anti-biofilm efficacy by integrating antibacterial GQAS, PEG, and PCL into waterborne polyurethane coatings.

Caging Cationic Polymer Brush-Coated Plasmonic Nanostructures for Traceable Selective Antimicrobial Activities

Cationic polymers are under intense research to achieve prominent antimicrobial activity. However, the cellular and in vivo toxicity caused by nonspecific electrostatic interaction has become a major challenge for their practical applications. Here, the development of a "caging" strategy based on the use of a block copolymer consisting of a stealth block and an anionic block that undergoes degradation in presence of enzymes secreted by selective bacterial pathogens of interest is reported. The results have shown that antimicrobial cationic polymer brushes-coated gold nanorods (AuNRs) can be caged by the block polymer of poly(ethylene glycol) and anionic, lipase-degradable block of ε-caprolactone and methacrylic acid copolymer to afford neutrally charged surfaces. The caged AuNRs are activated by lipase released by bacteria of interest to endow an excellent bactericidal effect but show minimal binding and toxicity against mammalian cells and nonspecific bacteria that do not produce lipase. In this design, AuNRs play multifunctional roles as the scaffolds for polymer brushes, photothermal transducers, and imaging probes for traceable delivery of the activation and delivery of bactericidal cationic polymer brushes. The caging strategy opens new opportunities for the safe delivery of antimicrobial materials for the treatment of bacterial infections.

Library of Derivatizable Multiblock Copolymers by Nucleophilic Substitution Polymerization and Targeting Specific Properties

Multiblock copolymers (MBCs) are fascinating in the field of biology-polymer chemistry interfaces. Synthesizing libraries of MBCs with tailor-made functionality is challenging as it involves multiple steps. Herein, a simple synthesis, analogous to polyurethane/Michael addition reactions, has been introduced to obtain a library of derivatizable MBCs. Nucleophilic substitution polymerization (S_NP) of poly(ε-caprolactone) and poly(ethylene glycol) blocks containing activated halide termini by primary mono/di/coamines or clickable amines provides functional MBCs. The structure of amines directs the properties of the MBCs. The self-assembly of small molecular weight primary diamine-based MBCs shows controlled release of hydrophobic model guest molecules and therapeutics. The primary diamine (no dangling chain) helps to form MBC micelles having a relatively tight core with a low diffusion property. Antimicrobial property in the MBCs has been introduced by separating the cationic centers from the lipophilic groups using a coamine as a nucleophilic agent and a small molecular weight dihalide as a chain extender. Clickable MBCs were synthesized by changing the structure of the nucleophile to obtain degradable amphiphilic conetworks and hydrogels. Varieties of macromolecular entities could be obtained by switching the nucleophilic agent and introducing a small molecular weight chain extender. This synthesis approach provides an opportunity to tune the chemical functionality, topological structure, and biological properties of macromolecular entities.

Chemical Modification of Bacterial Cellulose for the Development of an Antibacterial Wound Dressing

Bacterial cellulose is a bacterially derived polymer with great potential for application in wound healing due to its innate properties such as high biocompatibility and biodegradability. In addition to this, it is naturally biosynthesized by bacteria as a hydrogel, which makes it an optimal substrate for the treatment of dry wounds, where additional moisture is required to facilitate the healing process. However, this polymer lacks antibacterial properties. As bacterial infections are becoming increasingly common and difficult to treat due to antimicrobial resistance, it is of crucial importance to develop strategies for the modification of cellulose to ensure protection against bacterial contamination. In this study, a green-chemistry approach was proposed for the functionalization of cellulose to introduce antibacterial functional groups. Two different active agents, namely glycidyl trimethylammonium chloride and glycidyl hexadecyl ether, were used for the covalent derivatization of the hydroxyl groups of glucose through a heterogeneous reaction in basic aqueous conditions. The modified material was chemically and mechanically characterized by solid-state techniques and rheological measurements. A biological assessment was then carried out both using bacterial cells and human keratinocytes. It was observed that the functionalization performed induced a reduction of approximately half of the bacterial population within 24 h of direct contact with Staphylococcus aureus subsp. aureus Rosenbach 6538PTM and Escherichia coli (Migula) Castellani and Chalmers ATCC® 8739TM (respectively, a reduction of 53% and 43% in the cell number was registered for the two strains). In parallel, cytotoxicity studies performed on keratinocytes (HaCaT cell line) showed cell viability in the range of 90 to 100% for up to 6 days of direct contact with both unmodified and modified samples. The morphology of the cells was also visually evaluated, and no significant difference was noted as compared to the control. Finally, the in vitro scratch assay evidenced good wound closure rates in the presence of the samples, with complete coverage of the scratched area after 5 days for both the modified cellulose and the positive control (i.e., keratinocytes growth medium). Overall, the modified hydrogel showed promising features, confirming its potential as an alternative substrate to develop a sustainable, antibacterial and biocompatible wound dressing.

Eco-Friendly Castor Oil-Based Delivery System with Sustained Pesticide Release and Enhanced Retention

The deposition of pesticides and their retention on plant surfaces are critical challenges for modern precision agriculture, which directly affect phytosanitary treatment, bioavailability, efficacy, and the loss of pesticides. Herein, a novel and eco-friendly waterborne polyurethane delivery system was developed to enhance the spray deposition and pesticide retention on plant surfaces. More specifically, biobased cationic and anionic waterborne polyurethane dispersions were synthesized from castor oil. Both cationic and anionic polyurethane dispersions exhibited remarkable microstructural, amphiphilic, and nanoparticle morphologies with a core-shell structure that served to encapsulate a biopesticide (azadirachtin) in their hydrophobic cores (WPU-ACT). The results indicated that the cationic WPU-ACT carriers exhibited a better sustained release behavior and a better protective effect from light and heat for azadirachtin. In addition, the simultaneous spray of anionic and cationic WPU-ACT significantly enhanced the spray deposition and prolonged the retention of pesticides due to the reduced surface tension and surface precipitation induced by the electrostatic interaction when two droplets with opposite charges come into contact with each other. A field efficacy assessment also indicated that the simultaneous spray of anionic and cationic WPU-ACT could control the infestation of brown planthopper in rice crops. Castor oil-based waterborne polyurethanes in this study work as an efficient pesticide delivery system by exhibiting enhanced deposition, rainfastness, retention ability, protection, and sustained release behavior, holding great promise for spraying pesticide formulations in modern and environmentally friendly agricultural applications.

Preparation and Evaluation of Nanofibrous Hydroxypropyl Cellulose and β-Cyclodextrin Polyurethane Composite Mats

A series of nanofibrous composite mats based on polyurethane urea siloxane (PUUS), hydroxypropyl cellulose (HPC) and β-cyclodextrin (β-CD) was prepared using electrospinning technique. PUUS was synthesized by two steps solution polymerization procedure from polytetramethylene ether glycol (PTMEG), dimethylol propionic acid (DMPA), 4,4'-diphenylmethane diisocyanate (MDI) and 1,3-bis-(3-aminopropyl) tetramethyldisiloxane (BATD) as chain extender. Then, the composites were prepared by blending PUUS with HPC or βCD in a ratio of 9:1 (w/w), in 15% dimethylformamide (DMF). The PUUS and PUUS based composite solutions were used for preparation of nanofibrous mats. In order to identify the potential applications, different techniques were used to evaluate the chemical structure (Fourier transform infrared-attenuated total reflectance spectroscopy-FTIR-ATR), morphological structure (Scanning electron microscopy-SEM and Atomic force microscopy-AFM), surface properties (contact angle, dynamic vapors sorption-DVS), mechanical characteristics (tensile tests), thermal (differential scanning calorimetry-DSC) and some preliminary tests for biocompatibility and microbial adhesion.

Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses

We report biodegradable thermoplastic polyurethanes for soft tissue engineering applications, where frequently used carboxylic acid ester degradation motifs were substituted with carbonate moieties to achieve superior degradation properties. While the use of carbonates in soft blocks has been reported, their use in hard blocks of thermoplastic polyurethanes is unprecedented. Soft blocks consist of poly(hexamethylene carbonate), and hard blocks combine hexamethylene diisocyanate with the newly synthesized cleavable carbonate chain extender bis(3-hydroxypropylene)carbonate (BHPC), mimicking the motif of poly(trimethylene carbonate) with highly regarded degradation properties. Simultaneously, the mechanical benefits of segmented polyurethanes are exploited. A lower hard block concentration in BHPC-based polymers was more suitable for vascular grafts. Nonacidic degradation products and hard block dependent degradation rates were found. Implantation of BHPC-based electrospun degradable vascular prostheses in a small animal model revealed high patency rates and no signs of aneurysm formations. Specific vascular graft remodeling and only minimal signs of inflammatory reactions were observed.

Mechanically robust enzymatically degradable shape memory polyurethane urea with a rapid recovery response induced by NIR

NIR-light triggered shape memory process involving PU/gold-nanorod composites is shown.

Biodegradable, anti-adhesive and tough polyurethane hydrogels crosslinked by triol crosslinkers

The mechanical and biodegradable properties of hydrogels are two essential properties for practical biomaterial applications. In this work, a series of biodegradable polyurethane (PU) hydrogels were successfully synthesized using two kinds of triol crosslinkers with different chain structures. One crosslinker is normal glycerol (GC) with short chain length, and the other is biodegradable poly (ε-caprolactone)-triol (CAPA) with long chain length. All PU hydrogels showed considerable water uptake around ~60%, excellent strength (above 3 MPa), advisable modulus (0.9~1.7 MPa), high elasticity (above 700%), as well as good biodegradability and biocompatibility. Hydrogen bonds served as reversible sacrificial bonds in the PU hydrogels endow them good toughness with partial hysteresis during deformation. The biodegradable long chain crosslinker CAPA can certainly accelerate the degradation of PU hydrogels compared with the GC crosslinked hydrogels. The degradation of these hydrogels was a process of continuous erosion from the surface to interior, which contributes to the high remain of mechanical properties after 30 days-degradation. Besides, the hydrogels also show excellent antifouling ability of protein and anti-adhesion of cells. Therefore, these hydrogels suggest great potential used as biological anti-adhesive membranes or catheters.

Tailoring the degradation and mechanical properties of poly(ε-caprolactone) incorporating functional ε-caprolactone-based copolymers

Functional block copolymers (COPs) were synthesized through the ring-opening polymerization, and the effects of COPs on the hydrolytic & oxidative degradation and mechanical properties of PCL/COP composites were studied.

Simultaneous Improvement of Oxidative and Hydrolytic Resistance of Polycarbonate Urethanes Based on Polydimethylsiloxane/Poly(hexamethylene carbonate) Mixed Macrodiols

The degradation behaviors including oxidation and hydrolysis of silicone modified polycarbonate urethanes were thoroughly investigated. These polyurethanes were based on polyhexamethylene carbonate (PHMC)/polydimethylsiloxane (PDMS) mixed macrodiols with molar ratio of PDMS ranging from 5% to 30%. It was proved that PDMS tended to migrate toward surface and even a small amount of PDMS could form a silicone-like surface. Macrophages-mediated oxidation process indicated that the PDMS surface layer was desirable to protect the fragile soft PHMC from the attack of degradative species. Hydrolysis process was probed in detail after immersing in boiling buffered water using combined analytical tools. Hydrolytically stable PDMS could act as protective shields for the bulk to hinder the chain scission of polycarbonate carbonyls whereas the hydrolysis of urethane linkages was less affected. Although the promoted phase separation at higher PDMS fractions lead to possible physical defects and mechanical compromise after degradation, simultaneously enhanced oxidation and hydrolysis resistance could be achieved for the polyurethanes with proper PDMS incorporation.

Antibacterial and Biocompatible Cross-Linked Waterborne Polyurethanes Containing Gemini Quaternary Ammonium Salts

A cross-linked waterborne polyurethane (CPTMGPU) with long-term stability was developed from poly(ethylene glycol) (PEG), polyoxytetramethylene glycol (PTMG), isophorone diisocyanate (IPDI), l-lysine, and its derivative diamine consisting of gemini quaternary ammonium salt (GQAS), using ethylene glycol diglycidyl ether (EGDE) as a cross-linker. Weight loss test, X-ray photoelectron spectroscopy (XPS) measurements, and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were performed to prove the surface structure and stability of these CPTMGPU films. Furthermore, the GQAS-bearing CPTMGPUs show repeatable contact-active antibacterial efficacy against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria and do not show any inhibition effect against fibroblasts in vitro. After subcutaneous implantation in rats, the CPTMGPU films manifest good biocompatibility in vivo, despite the presence of a typical foreign body reaction toward surrounding tissues and mild systematic inflammation reaction that could be eliminated after a short implantation period, as demonstrated by histology and immunohistochemistry combined with interleukin (IL)-1β, IL-4, IL-6, IL-10, and TNF-α analysis though enzyme-linked immunosorbent assay (ELISA) and real-time quantitative polymerase chain reaction (qRT-PCR). Therefore, these cross-linked waterborne polyurethanes hold great promise for antibacterial applications in vivo.

A biomimetic hierarchical structure with a hydrophilic surface and a hydrophobic subsurface constructed from waterborne polyurethanes containing a self-assembling peptide extender

A biomimetic hierarchical structure with a hydrophilic surface and a hydrophobic subsurface is constructed from waterborne polyurethanes.

Clickable and imageable multiblock polymer micelles with magnetically guided and PEG-switched targeting and release property for precise tumor theranosis

Targeted delivery of therapeutics and diagnostics using nanotechnology holds great promise to minimize the side effects of conventional chemotherapy and enable specific and real-time detection of diseases. To realize this goal, we report a clickable and imageable nanovehicle assembled from multiblock polyurethanes (MPUs). The soft segments of the polymers are based on detachable poly(ethylene glycol) (PEG) and degradable poly(ε-caprolactone) (PCL), and the hard segments are constructed from lysine- and cystine-derivatives bearing reduction-responsive disulfide linkages and click-active alkynyl moieties, allowing for post-conjugation of targeting ligands via a click chemistry. It was found that the cleavage of PEG corona bearing a pH-sensitive benzoic-imine linkage (BPEG) could act as an on-off switch, which is capable of activating the clicked targeting ligands under extracellular acidic condition, followed by triggering the core degradation and payload release within tumor cells. In combination with superparamagnetic iron oxide nanoparticles (SPION) clustered within the micellar core, the MPUs exhibit excellent magnetic resonance imaging (MRI) contrast effects and T₂ relaxation in vitro, as well as magnetically guided MR imaging and multimodal targeting of therapeutics to tumor precisely, leading to significant inhibition of cancer with minimal side effect. This work provides a safe and versatile platform for the further development of smart theranostic systems for potential magnetically-targeted and imaging-guided personalized medicine.

Physically Targeted Intravenous Polyurethane Nanoparticles for Controlled Release of Atorvastatin Calcium

Background:

Intravenous drug delivery is an advantageous choice for rapid administration, immediate drug effect, and avoidance of first-pass metabolism in oral drug delivery. In this study, the synthesis, formulation, and characterization of atorvastatin-loaded polyurethane (PU) nanoparticles were investigated for intravenous route of administration.

Method:

First, PU was synthesized and characterized. Second, nanoparticles were prepared in four different ratios of drug to polymer through two different techniques, including emulsion-diffusion and single-emulsion. Finally, particle size and polydispersity index, shape and surface morphology, drug entrapment efficiency (EE), drug loading, and in vitro release were evaluated by dynamics light scattering, scanning electron microscopy, and UV visible spectroscopy, respectively.

Results:

Within two methods, the prepared nanoparticles had a spherical shape and a smooth surface with a diversity of size ranged from 174.04 nm to 277.24 nm in emulsion-diffusion and from 306.5 nm to 393.12 in the single-emulsion method. The highest EE was 84.76%, for (1:4) sample in the emulsion-diffusion method. It has also been shown that in vitro release of nanoparticles, using the emulsion-diffusion method, was sustained up to eight days by two mechanisms: drug diffusion and polymer relaxation.

Conclusion:

PU nanoparticles, that were prepared by the emulsion-diffusion method, could be used as effective carriers for the controlled drug delivery of poorly water soluble drugs such as atorvastatin calcium.

Surface Distribution and Biophysicochemical Properties of Polymeric Micelles Bearing Gemini Cationic and Hydrophilic Groups

Polymeric micelles containing cationic gemini quaternary ammonium (GQA) groups have shown enhanced cellular uptake and efficient drug delivery, while the incorporation of poly(ethylene glycol) (PEG) corona can potentially reduce the absorption of cationic carriers by opsonic proteins and subsequent uptake by mononuclear phagocytic system (MPS). To understand the interactions of GQA and PEG groups and their effects on the biophysicochemical characteristics of nanocarriers, a series of polyurethane micelles containing GQA and different molecular weights of PEG were prepared and carefully characterized. It was found that the GQA and PEG groups are unevenly distributed on the micellar surface to form two kinds of hydrophilic domains. As a result, the particle surface with some defects cannot be completely shielded by the PEG corona. Despite this, the longer PEG chains with a brush conformation provide superior stabilization and steric repulsion against the absorption of proteins and, thus, can reduce the cytotoxicity, protein absorption, and MPS uptake of micelles to some extent. This study provides a new understanding on the interactions between PEG chains and cationic groups and a guideline for the design and fabrication of safe and effective drug delivery systems.

Gemini quaternary ammonium salt waterborne biodegradable polyurethanes with antibacterial and biocompatible properties

Novel antibacterial waterborne polyurethanes based on gemini quaternary ammonium salt with good biodegradable and biocompatible properties.

A Novel Surface Structure Consisting of Contact-active Antibacterial Upper-layer and Antifouling Sub-layer Derived from Gemini Quaternary Ammonium Salt Polyurethanes

Contact-active antibacterial surfaces play a vital role in preventing bacterial contamination of artificial surfaces. In the past, numerous researches have been focused on antibacterial surfaces comprising of antifouling upper-layer and antibacterial sub-layer. In this work, we demonstrate a reversed surface structure which integrate antibacterial upper-layer and antifouling sub-layer. These surfaces are prepared by simply casting gemini quaternary ammonium salt waterborne polyurethanes (GWPU) and their blends. Due to the high interfacial energy of gemini quaternary ammonium salt (GQAS), chain segments containing GQAS can accumulate at polymer/air interface to form an antibacterial upper-layer spontaneously during the film formation. Meanwhile, the soft segments composed of polyethylene glycol (PEG) formed the antifouling sub-layer. Our findings indicate that the combination of antibacterial upper-layer and antifouling sub-layer endow these surfaces strong, long-lasting antifouling and contact-active antibacterial properties, with a more than 99.99% killing efficiency against both gram-positive and gram-negative bacteria attached to them.

Graphene as a chain extender of polyurethanes for biomedical applications

Chemically tagged graphene nanohybrid for a controlled drug delivery vehicle.

Gemini quaternary ammonium-incorporated biodegradable multiblock polyurethane micelles for brain drug delivery

Gemini quaternary ammonium (GQA) incorporated biodegradable multiblock polyurethane (BMPUs) micelles could transport drug across blood–brain barrier and improve brain drug accumulation.

In vitro drug release and biological evaluation of biomimetic polymeric micelles self-assembled from amphiphilic deoxycholic acid-phosphorylcholine-chitosan conjugate

Novel biomimetic amphiphilic chitosan derivative, deoxycholic acid-phosphorylcholine-chitosan conjugate (DCA-PCCs) was synthesized based on the combination of Atherton-Todd reaction for coupling phosphorylcholine (PC) and carbodiimide coupling reaction for linking deoxycholic acid (DCA) to chitosan. The chemical structure of DCA-PCCs was characterized by (1)H and (31)P nuclear magnetic resonance (NMR). The self-assembly of DCA-PCCs in water was analyzed by fluorescence measurements, dynamic laser light-scattering (DLS), zeta potential and transmission electron microscopy (TEM) technologies. The results confirmed that the amphiphilic DCA-PCCs can self-assemble to form nanosized spherical micelles with biomimetic PC shell. In vitro biological evaluation revealed that DCA-PCCs micelles had low toxicity against NIH/3T3 mouse embryonic fibroblasts as well as good hemocompatibility. Using quercetin as a hydrophobic model drug, drug loading and release study suggested that biomimetic DCA-PCCs micelles could be used as a promising nanocarrier avoiding unfavorable biological response for hydrophobic drug delivery applications.

Plasma and cellular pharmacokinetic considerations for the development and optimization of antitumor block copolymer micelles

INTRODUCTION

Clinical application of anticancer drugs is often limited by poor pharmacokinetic profile. The biocompatible and/or biodegradable block copolymer micelles (BCMs) can improve the pharmacokinetic behavior of drugs, thus enhancing antitumor effect. However, there are still many problems that needed to be solved before there is a wide clinical application of BCMs.

AREAS COVERED

Micelles have been quickly developed recently to deliver hydrophobic antitumor drugs specifically. However, the final therapeutic effect of BCMs is often challenged by many factors in vivo from both plasma and cellular pharmacokinetic view: i) inefficient transport from administration site to tumor tissue; ii) poor penetration into tumor mass; iii) inadequate accumulation in tumor cell; and iv) insufficient intracellular/subcellular release in cells. This review emphasized on the newest methods and solutions based on the main challenges of BCMs application in vivo, and the new problems caused by these methods are also discussed.

EXPERT OPINION

Different strategies and designs of BCMs can help solve problems in each key step respectively. However, overemphasis on one aspect will result in problems on others. Therefore, a comprehensive consideration is urgently needed to integrate the advantages of each strategy and overcome the disadvantages. Only with thorough understanding and scientific assessments, the desired BCMs are expected to be applied in clinical treatments.

Modelling the surface free energy parameters of polyurethane coats-part 2. Waterborne coats obtained from cationomer polyurethanes

Polyurethane cationomer coats were synthesised on the basis of typical diisocyanates, properly selected polyether polyols, HO-tertiary amines and HCOOH as quaternisation reagents. The values of their surface free energy (SFE) parameters were obtained by the van Oss-Good method, with the use of the contact angle values which had been found by the goniometric method. Based on the obtained findings, empirical models were developed which made it possible to anticipate the effects of the raw material types on the SFE values of the produced coats. The possibility was noted to adjust the SFE values within 25–50 mJ/m² by selecting carefully suitable parent substances. The principal consequences for the formation of improved hydrophobicity coats, applicable inter alia specialised protective coatings, were found to come not only from diisocyanate and polyol types but also from the alkylammonium cation structure which results from the use of different tertiary amines. The fundamental SFE lowering effect was noted when tertiary amines with 0–15 % of the 2,2,3,3-tetrafluoro-1,4-butanediol as a fluorinated chain extender was incorporated into polymer chains.

Marine biofouling resistance of polyurethane with biodegradation and hydrolyzation

We have prepared polyurethane with poly(ε-caprolactone) (PCL) as the segments of the main chain and poly(triisopropylsilyl acrylate) (PTIPSA) as the side chains by a combination of radical polymerization and a condensation reaction. Quartz crystal microbalance with dissipation studies show that polyurethane can degrade in the presence of enzyme and the degradation rate decreases with the PTIPSA content. Our studies also demonstrate that polyurethane is able to hydrolyze in artificial seawater and the hydrolysis rate increases as the PTIPSA content increases. Moreover, hydrolysis leads to a hydrophilic surface that is favorable to reduction of the frictional drag under dynamic conditions. Marine field tests reveal that polyurethane has good antifouling ability because polyurethane with a biodegradable PCL main chain and hydrolyzable PTIPSA side chains can form a self-renewal surface. Polyurethane was also used to carry and release a relatively environmentally friendly antifoulant, and the combined system exhibits a much higher antifouling performance even in a static marine environment.

Biodegradable multiblock polyurethane micelles with tunable reduction-sensitivity for on-demand intracellular drug delivery

Biodegradable polyurethanes bearing varied amounts of disulfide linkages in the backbone can rapidly enter tumor cells and efficiently transport the encapsulated payloads into cytosol, resulting in controlled inhibition effects against cancer cells. The nanocarriers are promising candidates for on-demand intracellular drug delivery applications.

Synthesis and characterization of biodegradable polyurethanes with folate side chains conjugated to hard segments

In this study, a novel folate-conjugated chain extender (LDDFA) was designed and synthesized to enhance site-specific intracellular delivery of drug carriers against folate receptor overexpressing tumors.

Biomimetic polyurethanes in nano and regenerative medicine

Nature's inspiration is a promising tool to design new biomaterials especially for frontier technological areas such as tissue engineering and nanomedicine.