Isofunctional enzymes PAD1 and UbiX catalyze formation of a novel cofactor required by ferulic acid decarboxylase and 4-hydroxy-3-polyprenylbenzoic acid decarboxylase

Surveying the scope of aromatic decarboxylations catalyzed by prenylated-flavin dependent enzymes

The prenylated-flavin mononucleotide-dependent decarboxylases (also known as UbiD-like enzymes) are the most recently discovered family of decarboxylases. The modified flavin facilitates the decarboxylation of unsaturated carboxylic acids through a novel mechanism involving 1,3-dipolar cyclo-addition chemistry. UbiD-like enzymes have attracted considerable interest for biocatalysis applications due to their ability to catalyse (de)carboxylation reactions on a broad range of aromatic substrates at otherwise unreactive carbon centres. There are now ∼35 000 protein sequences annotated as hypothetical UbiD-like enzymes. Sequence similarity network analyses of the UbiD protein family suggests that there are likely dozens of distinct decarboxylase enzymes represented within this family. Furthermore, many of the enzymes so far characterized can decarboxylate a broad range of substrates. Here we describe a strategy to identify potential substrates of UbiD-like enzymes based on detecting enzyme-catalysed solvent deuterium exchange into potential substrates. Using ferulic acid decarboxylase (FDC) as a model system, we tested a diverse range of aromatic and heterocyclic molecules for their ability to undergo enzyme-catalysed H/D exchange in deuterated buffer. We found that FDC catalyses H/D exchange, albeit at generally very low levels, into a wide range of small, aromatic molecules that have little resemblance to its physiological substrate. In contrast, the sub-set of aromatic carboxylic acids that are substrates for FDC-catalysed decarboxylation is much smaller. We discuss the implications of these findings for screening uncharacterized UbiD-like enzymes for novel (de)carboxylase activity.

Probing the role of protein conformational changes in the mechanism of prenylated-FMN-dependent phenazine-1-carboxylic acid decarboxylase

Phenazine-1-carboxylic acid decarboxylase (PhdA) is a prenylated-FMN-dependent (prFMN) enzyme belonging to the UbiD family of decarboxylases. Many UbiD-like enzymes catalyze (de)carboxylation reactions on aromatic rings and conjugated double bonds and are potentially valuable industrial catalysts. We have investigated the mechanism of PhdA using a slow turnover substrate, 2,3-dimethylquinoxaline-5-carboxylic acid (DQCA). Detailed analysis of the pH dependence and solvent deuterium isotope effects associated with the reaction uncovered unusual kinetic behavior. At low substrate concentrations, a substantial inverse solvent isotope effect (SIE) is observed on Vmax/KM of ∼ 0.5 when reaction rates of DQCA in H2O and D2O are compared. Under the same conditions, a normal SIE of 4.15 is measured by internal competition for proton transfer to the product. These apparently contradictory results indicate that the SIE values report on different steps in the mechanism. A proton inventory analysis of the reaction under Vmax/KM and Vmax conditions points to a "medium effect" as the source of the inverse SIE. Molecular dynamics simulations of the effect of D2O on PhdA structure support that D2O reduces the conformational lability of the enzyme and results in a more compact structure, akin to the active, "closed" conformer observed in crystal structures of some UbiD-like enzymes. Consistent with the simulations, PhdA was found to be more stable in D2O and to bind DQCA more tightly, leading to the observed rate enhancement under Vmax/KM conditions.

Spectrophotometric and Fluorimetric High-Throughput Assays for Phenolic Acid Decarboxylase

Biocatalytic decarboxylation of hydroxycinnamic acids yields phenolic styrenes, which are important precursors for antioxidants, epoxy coatings, adhesives and other polymeric materials. Bacillus subtilis decarboxylase (BsPAD) is a cofactor-independent enzyme that catalyzes the cleavage of carbon dioxide from p-coumaric-, caffeic-, and ferulic acid with high catalytic efficiency. Real-time spectroscopic assays for decarboxylase reactions remove the necessity of extensive sample workup, which is required for HPLC, mass spectrometry, gas chromatography, or NMR methods. This work presents two robust and sensitive assays based on photometry and fluorimetry that allow decarboxylation reactions to be followed with high sensitivity while avoiding product extraction and long analysis times. Optimized assay procedures were used to measure BsPAD activity in cell lysates and to determine the kinetic constants (KM and Vmax ) of the purified enzyme for p-coumaric-, caffeic- and ferulic acid. Substrate inhibition was shown for caffeic acid.

FhuA: From Iron-Transporting Transmembrane Protein to Versatile Scaffolds through Protein Engineering

ConspectusProtein engineering has emerged as a powerful methodology to tailor the properties of proteins. It empowers the design of biohybrid catalysts and materials, thereby enabling the convergence of materials science, chemistry, and medicine. The choice of a protein scaffold is an important factor for performance and potential applications. In the past two decades, we utilized the ferric hydroxamate uptake protein FhuA. FhuA is, from our point of view, a versatile scaffold due to its comparably large cavity and robustness toward temperature as well as organic cosolvents. FhuA is a natural iron transporter located in the outer membrane of Escherichia coli (E. coli). Wild-type FhuA consists of 714 amino acids and has a β-barrel structure composed of 22 antiparallel β-sheets, closed by an internal globular "cork" domain (amino acids 1-160). FhuA is robust in a broad pH range and toward organic cosolvents; therefore, we envisioned FhuA to be a suitable platform for various applications in (i) biocatalysis, (ii) materials science, and (iii) the construction of artificial metalloenzymes.(i) Applications in biocatalysis were achieved by removing the globular cork domain (FhuA_Δ1-160), thereby creating a large pore for the passive transport of otherwise difficult-to-import molecules through diffusion. Introducing this FhuA variant into the outer membrane of E. coli facilitates the uptake of substrates for downstream biocatalytic conversion. Furthermore, removing the globular "cork" domain without structural collapse of the ß-barrel protein allowed the use of FhuA as a membrane filter, exhibiting a preference for d-arginine over l-arginine.(ii) FhuA is a transmembrane protein, which makes it attractive to be used for applications in non-natural polymeric membranes. Inserting FhuA into polymer vesicles yielded so-called synthosomes (i.e., catalytic synthetic vesicles in which the transmembrane protein acted as a switchable gate or filter). Our work in this direction enables polymersomes to be used in biocatalysis, DNA recovery, and the controlled (triggered) release of molecules. Furthermore, FhuA can be used as a building block to create protein-polymer conjugates to generate membranes.(iii) Artificial metalloenzymes (ArMs) are formed by incorporating a non-native metal ion or metal complex into a protein. This combines the best of two worlds: the vast reaction and substrate scope of chemocatalysis and the selectivity and evolvability of enzymes. With its large inner diameter, FhuA can harbor (bulky) metal catalysts. Among others, we covalently attached a Grubbs-Hoveyda-type catalyst for olefin metathesis to FhuA. This artificial metathease was then used in various chemical transformations, ranging from polymerizations (ring-opening metathesis polymerization) to enzymatic cascades involving cross-metathesis. Ultimately, we generated a catalytically active membrane by copolymerizing FhuA and pyrrole. The resulting biohybrid material was then equipped with the Grubbs-Hoveyda-type catalyst and used in ring-closing metathesis.The number of reports on FhuA and its various applications indicates that it is a versatile building block to generate hybrid catalysts and materials. We hope that our research will inspire future research efforts at the interface of biotechnology, catalysis, and material science in order to create biohybrid systems that offer smart solutions for current challenges in catalysis, material science, and medicine.

Complete integration of carbene-transfer chemistry into biosynthesis

Biosynthesis is an environmentally benign and renewable approach that can be used to produce a broad range of natural and, in some cases, new-to-nature products. However, biology lacks many of the reactions that are available to synthetic chemists, resulting in a narrower scope of accessible products when using biosynthesis rather than synthetic chemistry. A prime example of such chemistry is carbene-transfer reactions1. Although it was recently shown that carbene-transfer reactions can be performed in a cell and used for biosynthesis2,3, carbene donors and unnatural cofactors needed to be added exogenously and transported into cells to effect the desired reactions, precluding cost-effective scale-up of the biosynthesis process with these reactions. Here we report the access to a diazo ester carbene precursor by cellular metabolism and a microbial platform for introducing unnatural carbene-transfer reactions into biosynthesis. The α-diazoester azaserine was produced by expressing a biosynthetic gene cluster in Streptomyces albus. The intracellularly produced azaserine was used as a carbene donor to cyclopropanate another intracellularly produced molecule-styrene. The reaction was catalysed by engineered P450 mutants containing a native cofactor with excellent diastereoselectivity and a moderate yield. Our study establishes a scalable, microbial platform for conducting intracellular abiological carbene-transfer reactions to functionalize a range of natural and new-to-nature products and expands the scope of organic products that can be produced by cellular metabolism.

Naphthalene Carboxylation in the Sulfate-Reducing Enrichment Culture N47 Is Proposed to Proceed via 1,3-Dipolar Cycloaddition to the Cofactor Prenylated Flavin Mononucleotide

Polycyclic aromatic hydrocarbons are persistent pollutants of anthropogenic or natural origin in the environment and accumulate in anoxic habitats. In this study, we investigated the mechanism of the enzyme naphthalene carboxylase as a model reaction for polycyclic aromatic hydrocarbon activation by carboxylation. An enzyme assay was established with cell extracts of the highly enriched culture N47. In assays without addition of ATP, naphthalene carboxylase catalyzed a stable isotope exchange of the carboxyl group of naphthoate with 13C-labeled bicarbonate buffer, which can only occur via a partial backwards reaction of the naphthalene carboxylase reaction to an intermediate that does not include the carboxyl group. Hence, a new carboxyl group from the labeled bicarbonate is added upon forward reaction to the naphthoate. This indicates that the reaction mechanism consists of two or more steps and that at least the latter steps are reversible and ATP independent. Naphthalene carboxylation assays were carried out in deuterated buffer and revealed the incorporation of 0, 1, 2, or 3 deuterium atoms in the final product naphthoyl-coenzyme A, indicating that the reaction is fully reversible. Putative reaction mechanisms were tested by quantum mechanical calculations. The proposed mechanism of the reaction consists of three steps: the activation of the naphthalene by 1,3-dipolar cycloaddition of the cofactor prFMN to naphthalene, release of a proton and rearomatization producing a stable intermediate, and a carboxylation with a reverse 1,3-dipolar cycloaddition and cleavage of the bond to the cofactor producing 2-naphthoate. IMPORTANCE Pollution with polycyclic aromatic hydrocarbons poses a great hazard to humans and animals, with considerable long-term effects. The anaerobic degradation of polycyclic aromatic hydrocarbons in anoxic zones and anaerobic growth of such organisms is very slow, leading to only poor investigation of the degradation pathways, so far. In this work, we elucidated the mechanism of naphthalene carboxylase, a key enzyme in anaerobic naphthalene degradation. This is the first mechanism proposed for a carboxylase targeting nonsubstituted (polycyclic) aromatic compounds and can serve as a model for the initial activation reaction in the anaerobic degradation of benzene or nonsubstituted polycyclic aromatic hydrocarbons, as well as similar enzymatic reactions from the expanding class of UbiD-like (de)carboxylases.

Integrating metabolomics and metatranscriptomics to explore the formation pathway of aroma-active volatile phenolics and metabolic profile during industrial radish paocai fermentation

The aroma profile of industrial Sichuan paocai is formed and regulated by complex physiological and biochemical reactions and microbial metabolism, but little is known so far. In this study, we comprehensively analyzed the changes of metabolic profile and gene expression profile, mainly explored the formation pathways of two skeleton aroma-active compounds, 4-ethylphenol and 4-ethylguaiacol, and verified the pathways at multiple levels. The results showed that a total of 136 volatile metabolites and 560 non-volatile metabolites were identified in the whole fermentation process. The types and concentrations of metabolites in paocai were higher than those in brine, and gradually converged with fermentation. Differential analysis of metabolism and transcription levels were both enriched in three pathways: amino acid metabolism, phenylpropanoid metabolism and lipid metabolism. Among them, 4-ethylphenol and 4-ethylguaiacol, the products of the phenylpropanoid metabolism, were converted from p-coumaric acid and ferulic acid in plant cell walls, respectively. Under the action of decarboxylase produced by yeast (such as Debaryomyces Hansenii) and lactic acid bacteria (such as Lactobacillus versmoldensis), intermediate metabolites vinylphenols were produced, and the intermediate metabolites further produce the final products under the action of vinylphenol reductase. The key gene copy number, enzyme activity, and metabolite concentration in the pathways were detected to provide stronger evidence for the formation pathways. This study provided meaningful new insights for the development of aroma-producing enzymes and further guidance for the flavor improvement of industrial paocai.

Enzymatic Conversion of CO2: From Natural to Artificial Utilization

Enzymatic carbon dioxide fixation is one of the most important metabolic reactions as it allows the capture of inorganic carbon from the atmosphere and its conversion into organic biomass. However, due to the often unfavorable thermodynamics and the difficulties associated with the utilization of CO₂, a gaseous substrate that is found in comparatively low concentrations in the atmosphere, such reactions remain challenging for biotechnological applications. Nature has tackled these problems by evolution of dedicated CO₂-fixing enzymes, i.e., carboxylases, and embedding them in complex metabolic pathways. Biotechnology employs such carboxylating and decarboxylating enzymes for the carboxylation of aromatic and aliphatic substrates either by embedding them into more complex reaction cascades or by shifting the reaction equilibrium via reaction engineering. This review aims to provide an overview of natural CO₂-fixing enzymes and their mechanistic similarities. We also discuss biocatalytic applications of carboxylases and decarboxylases for the synthesis of valuable products and provide a separate summary of strategies to improve the efficiency of such processes. We briefly summarize natural CO₂ fixation pathways, provide a roadmap for the design and implementation of artificial carbon fixation pathways, and highlight examples of biocatalytic cascades involving carboxylases. Additionally, we suggest that biochemical utilization of reduced CO₂ derivates, such as formate or methanol, represents a suitable alternative to direct use of CO₂ and provide several examples. Our discussion closes with a techno-economic perspective on enzymatic CO₂ fixation and its potential to reduce CO₂ emissions.

Negative Cooperativity in the Mechanism of Prenylated-Flavin-Dependent Ferulic Acid Decarboxylase: A Proposal for a "Two-Stroke" Decarboxylation Cycle

Ferulic acid decarboxylase (FDC) catalyzes the reversible carboxylation of various substituted phenylacrylic acids to produce the correspondingly substituted styrenes and CO₂. FDC is a member of the UbiD family of enzymes that use prenylated-FMN (prFMN) to catalyze decarboxylation reactions on aromatic rings and C-C double bonds. Although a growing number of prFMN-dependent enzymes have been identified, the mechanism of the reaction remains poorly understood. Here, we present a detailed pre-steady-state kinetic analysis of the FDC-catalyzed reaction of prFMN with both styrene and phenylacrylic acid. Based on the pattern of reactivity observed, we propose a "two-stroke" kinetic model in which negative cooperativity between the two subunits of the FDC homodimer plays an important and previously unrecognized role in catalysis. In this model, catalysis is initiated at the high-affinity active site, which reacts with phenylacrylate to yield, after decarboxylation, the covalently bound styrene-prFMN cycloadduct. In the second stage of the catalytic cycle, binding of the second substrate molecule to the low-affinity active site drives a conformational switch that interconverts the high-affinity and low-affinity active sites. This switching of affinity couples the energetically unfavorable cycloelimination of styrene from the first site with the energetically favorable cycloaddition and decarboxylation of phenylacrylate at the second site. We note as a caveat that, at this point, the complexity of the FDC kinetics leaves open other mechanistic interpretations and that further experiments will be needed to more firmly establish or refute our proposal.

Screening low-methanol and high-aroma produced yeasts for cider fermentation by transcriptive characterization

The commercial active dry yeast strains used for cider production in China are far behind the requirements of the cider industry development in recent decades. In this study, eight yeasts, including Saccharomyces cerevisiae, Schizosaccharomyces pombe, Pichia bruneiensis, and Pichia kudriavzevii, were screened and assessed by growth performance, methanol production, aroma analysis, and their transcriptive characterization. Saccharomyces cerevisiae strains WFC-SC-071 and WFC-SC-072 were identified as promising alternatives for cider production. Strains WFC-SC-071 and WFC-SC-072 showed an excellent growth capacity characterized by 91.6 and 88.8% sugar utilization, respectively. Methanol production by both strains was below 200 mg/L. Key aroma compounds imparting cider appreciably characteristic aroma increased in cider fermented by strains WFC-SC-071 and WFC-SC-072. RT-qPCR analysis suggested that most genes associated with growth capacity, carbohydrate uptake, and aroma production were upregulated in WFC-SC-071 and WFC-SC-072. Overall, two Saccharomyces cerevisiae strains are the optimal starters for cider production to enable the diversification of cider, satisfy the differences in consumer demand, and promote cider industry development.

Toolbox for the structure-guided evolution of ferulic acid decarboxylase (FDC)

The interest towards ferulic acid decarboxylase (FDC), piqued by the enzyme's unique 1,3-dipolar cycloaddition mechanism and its atypic prFMN cofactor, provided several applications of the FDC mediated decarboxylations, such as the synthesis of styrenes, or its diverse derivatives, including 1,3-butadiene and the enzymatic activation of C-H bonds through the reverse carboligation reactions. While rational design-based protein engineering was successfully employed for tailoring FDC towards diverse substrates of interest, the lack of high-throughput FDC-activity assay hinders its directed evolution-based protein engineering. Herein we report a toolbox, useful for the directed evolution based and/or structure-guided protein engineering of FDC, which was validated representatively on the well described FDC, originary from Saccharomyces cerevisiae (ScFDC). Accordingly, the developed fluorescent plate-assay allows in premiere the FDC-activity screens of a mutant library in a high-throughput manner. Moreover, using the plate-assay for the activity screens of a rationally designed 23-membered ScFDC variant library against a substrate panel comprising of 16, diversely substituted cinnamic acids, revealed several variants of improved activity. The superior catalytic properties of the hits revealed by the plate-assay, were also supported by the conversion values from their analytical scale biotransformations. The computational results further endorsed the experimental findings, showing inactive binding poses of several non-transformed substrate analogues within the active site of the wild-type ScFDC, but favorable ones within the catalytic site of the variants of improved activity. The results highlight several 'hot-spot' residues involved in substrate specificity modulation of FDC, such as I189, I330, F397, I398 or Q192, of which mutations to sterically less demanding residues increased the volume of the active site, thus facilitated proper binding and increased conversions of diverse non-natural substrates. Upon revealing which mutations improve the FDC activity towards specific substrate analogues, we also provide key for the rational substrate-tailoring of FDC.

One-Pot Biocatalytic In Vivo Methylation-Hydroamination of Bioderived Lignin Monomers to Generate a Key Precursor to L-DOPA

Electron-rich phenolic substrates can be derived from the depolymerisation of lignin feedstocks. Direct biotransformations of the hydroxycinnamic acid monomers obtained can be exploited to produce high-value chemicals, such as α-amino acids, however the reaction is often hampered by the chemical autooxidation in alkaline or harsh reaction media. Regioselective O-methyltransferases (OMTs) are ubiquitous enzymes in natural secondary metabolic pathways utilising an expensive co-substrate S-adenosyl-l-methionine (SAM) as the methylating reagent altering the physicochemical properties of the hydroxycinnamic acids. In this study, we engineered an OMT to accept a variety of electron-rich phenolic substrates, modified a commercial E. coli strain BL21 (DE3) to regenerate SAM in vivo, and combined it with an engineered ammonia lyase to partake in a one-pot, two whole cell enzyme cascade to produce the l-DOPA precursor l-veratrylglycine from lignin-derived ferulic acid.

One-Pot Biocatalytic In Vivo Methylation-Hydroamination of Bioderived Lignin Monomers to Generate a Key Precursor to L-DOPA

Electron‐rich phenolic substrates can be derived from the depolymerisation of lignin feedstocks. Direct biotransformations of the hydroxycinnamic acid monomers obtained can be exploited to produce high‐value chemicals, such as α‐amino acids, however the reaction is often hampered by the chemical autooxidation in alkaline or harsh reaction media. Regioselective O‐methyltransferases (OMTs) are ubiquitous enzymes in natural secondary metabolic pathways utilising an expensive co‐substrate S‐adenosyl‐l‐methionine (SAM) as the methylating reagent altering the physicochemical properties of the hydroxycinnamic acids. In this study, we engineered an OMT to accept a variety of electron‐rich phenolic substrates, modified a commercial E. coli strain BL21 (DE3) to regenerate SAM in vivo, and combined it with an engineered ammonia lyase to partake in a one‐pot, two whole cell enzyme cascade to produce the l‐DOPA precursor l‐veratrylglycine from lignin‐derived ferulic acid.

Stress modulation as a means to improve yeasts for lignocellulose bioconversion

The second-generation (2G) fermentation environment for lignocellulose conversion presents unique challenges to the fermentative organism that do not necessarily exist in other industrial fermentations. While extreme osmotic, heat, and nutrient starvation stresses are observed in sugar- and starch-based fermentation environments, additional pre-treatment-derived inhibitor stress, potentially exacerbated by stresses such as pH and product tolerance, exist in the 2G environment. Furthermore, in a consolidated bioprocessing (CBP) context, the organism is also challenged to secrete enzymes that may themselves lead to unfolded protein response and other stresses. This review will discuss responses of the yeast Saccharomyces cerevisiae to 2G-specific stresses and stress modulation strategies that can be followed to improve yeasts for this application. We also explore published -omics data and discuss relevant rational engineering, reverse engineering, and adaptation strategies, with the view of identifying genes or alleles that will make positive contributions to the overall robustness of 2G industrial strains. KEYPOINTS: • Stress tolerance is a key driver to successful application of yeast strains in biorefineries. • A wealth of data regarding stress responses has been gained through omics studies. • Integration of this knowledge could inform engineering of fit for purpose strains.

Sourdough yeast-bacteria interactions can change ferulic acid metabolism during fermentation

The metabolism of ferulic acid (FA) was studied during fermentation with different species and strains of lactic acid bacteria (LAB) and yeasts, in synthetic sourdough medium. Yeast strains of Kazachstania humilis, Kazachstania bulderi, and Saccharomyces cerevisiae, as well as lactic acid bacteria strains of Fructilactobacillus sanfranciscensis, Lactiplantibacillus plantarum, Lactiplantibacillus xiangfangensis, Levilactobacillus hammesii, Latilactobacillus curvatus and Latilactobacillus sakei were selected from French natural sourdoughs. Fermentation in presence or absence of FA was carried out in LAB and yeasts monocultures, as well as in LAB/yeast co-cultures. Our results indicated that FA was mainly metabolized into 4-vinylguaiacol (4-VG) by S. cerevisiae strains, and into dihydroferulic acid (DHFA) and 4-VG in the case of LAB. Interactions of LAB and yeasts led to the modification of FA metabolism, with a major formation of DHFA, even by the strains that do not produce it in monoculture. Interestingly, FA was almost completely consumed by the F. sanfranciscensis bFs17 and K. humilis yKh17 pair and converted into DHFA in 89.5 ± 19.6% yield, while neither bFs17, nor yKh17 strains assimilated FA in monoculture.

Generation of 4-vinylguaiacol through a novel high-affinity ferulic acid decarboxylase to obtain smoke flavours without carcinogenic contaminants

Traditional smoke flavours bear the risk of containing a multitude of contaminating carcinogenic side-products. Enzymatic decarboxylation of ferulic acid released from agro-industrial side-streams by ferulic acid esterases (FAE) enables the sustainable generation of pure, food grade 4-vinylguaiacol (4-VG), the impact compound of smoke flavour. The first basidiomycetous ferulic acid decarboxylase (FAD) was isolated from Schizophyllum commune (ScoFAD) and heterologously produced by Komagataella phaffii. It showed a molecular mass of 21 kDa, catalytic optima at pH 5.5 and 35°C, and a sequence identity of 63.6% to its next relative, a FAD from the ascomycete Cordyceps farinosa. The ScoFAD exhibited a high affinity to its only known substrate ferulic acid (FA) of 0.16 mmol L^-1 and a turnover number of 750 s^-1. The resulting catalytic efficiency k_cat K_M^-1 of 4,779 L s^-1 mmol^-1 exceeded the next best known enzyme by more than a factor of 50. Immobilised on AminoLink Plus Agarose, ScoFAD maintained its activity for several days. The combination with FAEs and agro-industrial side-streams paves the way for a new generation of sustainable, clean, and safe smoke flavours.

Kinetic Analysis of Transient Intermediates in the Mechanism of Prenyl-Flavin-Dependent Ferulic Acid Decarboxylase

Ferulic acid decarboxylase catalyzes the decarboxylation of various substituted phenylacrylic acids to their corresponding styrene derivatives and CO₂ using the recently discovered cofactor prenylated FMN (prFMN). The mechanism involves an unusual 1,3-dipolar cycloaddition reaction between prFMN and the substrate to generate a cycloadduct capable of undergoing decarboxylation. Using native mass spectrometry, we show the enzyme forms a stable prFMN-styrene cycloadduct that accumulates on the enzyme during turnover. Pre-steady state kinetic analysis of the reaction using ultraviolet-visible stopped-flow spectroscopy reveals a complex pattern of kinetic behavior, best described by a half-of-sites model involving negative cooperativity between the two subunits of the dimeric enzyme. For the reactive site, the cycloadduct of prFMN with phenylacylic acid is formed with a k_app of 131 s^-1. This intermediate converts to the prFMN-styrene cycloadduct with a k_app of 75 s^-1. Cycloelimination of the prFMN-styrene cycloadduct to generate styrene and free enzyme appears to determine k_cat for the overall reaction, which is 11.3 s^-1.

N5 Is the New C4a: Biochemical Functionalization of Reduced Flavins at the N5 Position

For three decades the C4a-position of reduced flavins was the known site for covalency within flavoenzymes. The reactivity of this position of the reduced isoalloxazine ring with the dioxygen ground-state triplet established the C4a as a site capable of one-electron chemistry. Within the last two decades new types of reduced flavin reactivity have been documented. These studies reveal that the N5 position is also a protean site of reactivity, that is capable of nucleophilic attack to form covalent bonds with substrates. In addition, though the precise mechanism of dioxygen reactivity is yet to be definitively demonstrated, it is clear that the N5 position is directly involved in substrate oxygenation in some enzymes. In this review we document the lineage of discoveries that identified five unique modes of N5 reactivity that collectively illustrate the versatility of this position of the reduced isoalloxazine ring.

Fluorescent enzyme-coupled activity assay for phenylalanine ammonia-lyases

Phenylalanine ammonia-lyases (PALs) catalyse the non-oxidative deamination of l-phenylalanine to trans-cinnamic acid, while in the presence of high ammonia concentration the reverse reaction occurs. PALs have been intensively studied, however, their industrial applications for amino acids synthesis remained limited, mainly due to their decreased operational stability or limited substrate specificity. The application of extensive directed evolution procedures to improve their stability, activity or selectivity, is hindered by the lack of reliable activity assays allowing facile screening of PAL-activity within large-sized mutant libraries. Herein, we describe the development of an enzyme-coupled fluorescent assay applicable for PAL-activity screens at whole cell level, involving decarboxylation of trans-cinnamic acid (the product of the PAL reaction) by ferulic acid decarboxylase (FDC1) and a photochemical reaction of the produced styrene with a diaryltetrazole, that generates a detectable, fluorescent pyrazoline product. The general applicability of the fluorescent assay for PALs of different origin, as well as its versatility for the detection of tyrosine ammonia-lyase (TAL) activity have been also demonstrated. Accordingly, the developed procedure provides a facile tool for the efficient activity screens of large mutant libraries of PALs in presence of non-natural substrates of interest, being essential for the substrate-specificity modifications/tailoring of PALs through directed evolution-based protein engineering.

Ferulic Acid Decarboxylase Controls Oxidative Maturation of the Prenylated Flavin Mononucleotide Cofactor

Prenylated flavin mononucleotide (prFMN) is a recently discovered modified flavin cofactor containing an additional nonaromatic ring, connected to the N5 and C6 atoms. This cofactor underpins reversible decarboxylation catalyzed by members of the widespread UbiD enzyme family and is produced by the flavin prenyltransferase UbiX. Oxidative maturation of the UbiX product prFMNH₂ to the corresponding oxidized prFMN^iminium is required for ferulic acid decarboxylase (Fdc1; a UbiD-type enzyme) activity. However, it is unclear what role the Fdc1 enzyme plays in this process. Here, we demonstrate that, in the absence of Fdc1, prFMNH₂ oxidation by O₂ proceeds via a transient semiquinone prFMN^radical species and culminates in a remarkably stable prFMN-hydroperoxide species. Neither forms of prFMN are able to support Fdc1 activity. Instead, enzyme activation using O₂-mediated oxidation requires prFMNH₂ binding prior to oxygen exposure, confirming that UbiD enzymes play a role in O₂-mediated oxidative maturation. In marked contrast, alternative oxidants such as potassium ferricyanide support prFMN^iminium formation both in solution and in Fdc1.

Increasing the level of 4-vinylguaiacol in top-fermented wheat beer by secretory expression of ferulic acid decarboxylase from Bacillus pumilus in brewer's yeast

OBJECTIVE

The objective is to explore the effects of enhancing the activity of yeast ferulic acid decarboxylase (FDC1) on the level of 4-vinylguaiacol (4-VG) and the consumption of its precursor ferulic acid (FA) in top-fermented wheat beer.

RESULTS

Expression of Bacillus pumilus FDC1 in brewer's yeast showed a better effect on the FDC1 activity than overexpression of the endogenous enzyme. The 4-VG content was increased by 34%, and the consumption time of FA was shortened from 48 to 12 h. Since the intracellular accumulation of the FDC1 substrate did not increase over time, to reduce the FA transport burden on cells and shorten the decarboxylation time, B. pumilus FDC1 was further secreted extracellularly. The resulted strain showed a 65% increase in 4-VG content in the FA-containing medium, and produced about 3 mg L^-1 4-VG in the top-fermented wheat beer, increasing by 61% than control. However, further increasing the secretory expression level of FDC1 only accelerated FA consumption.

CONCLUSIONS

These results suggested that appropriate secretion of bacterial FDC1 into wort could be used as a potential alternative strategy to increase the level of 4-VG in top-fermented wheat beer.

Flavoenzymes for biocatalysis

Flavoenzymes are broadly employed as biocatalysts for a large variety of reactions, owing to the chemical versatility of the flavin cofactor. Oxidases set aside, many flavoenzymes require a source of electrons in form of the biological reductant nicotinamide NAD(P)H in order to initiate catalysis via the reduced flavin. Chemists can take advantage of the reactivity of reduced flavins with oxygen to carry out monooxygenation reactions, while the reduced flavin can also be used for formal hydrogenation reactions. The main advantage of these reactions compared to chemical approaches is the frequent regio-, chemo- and stereo-selectivity of the biocatalysts, which allows the synthesis of chiral molecules in optically active form. This chapter provides an overview of the variety of biocatalytic processes that have been developed with flavoenzymes, with a particular focus on nicotinamide-dependent enzymes. The diversity of molecules obtained is highlighted and in several cases, strategies that allow control of the stereochemical outcome of the reactions are reviewed.

Biochemistry of prenylated-FMN enzymes

The reversible (de)carboxylation of unsaturated carboxylic acids is carried out by the UbiX-UbiD system, ubiquitously present in microbes. The biochemical basis of this challenging reaction has recently been uncovered by the discovery of the UbiD cofactor, prenylated FMN (prFMN). This heavily modified flavin is synthesized by the flavin prenyltransferase UbiX, which catalyzes the non-metal dependent prenyl transfer from dimethylallyl(pyro)phosphate (DMAP(P)) to the flavin N5 and C6 positions, creating a fourth non-aromatic ring. Following prenylation, prFMN undergoes oxidative maturation to form the iminium species required for UbiD activity. prFMN^iminium acts as a prostethic group and is bound via metal ion mediated interactions between UbiD and the prFMN^iminium phosphate moiety. The modified isoalloxazine ring is place adjacent to the E(D)-R-E UbiD signature sequent motif. The fungal ferulic acid decarboxylase Fdc from Aspergillus niger has emerged as a UbiD-model system, and has yielded atomic level insight into the prFMN^iminium mediated (de)carboxylation. A wealth of data now supports a mechanism reliant on reversible 1,3 dipolar cycloaddition between substrate and cofactor for this enzyme. This poses the intriguing question whether a similar mechanism is used by all UbiD enzymes, especially those that act as carboxylases on inherently more difficult substrates such as phenylphosphate or benzene/naphthalene. Indeed, considerable variability in terms of oligomerization, domain motion and active site structure is now reported for the UbiD family.

Biocatalytic in Vitro and in Vivo FMN Prenylation and (De)carboxylase Activation

Reversible UbiD-like (de)carboxylases represent a large family of mostly uncharacterized enzymes, which require the recently discovered prenylated FMN (prFMN) cofactor for activity. Functional characterization of novel UbiDs is hampered by a lack of robust protocols for prFMN generation and UbiD activation. Here, we report two systems for in vitro and in vivo FMN prenylation and UbiD activation under aerobic conditions. The in vitro one-pot prFMN cascade includes five enzymes: FMN prenyltransferase (UbiX), prenol kinase, polyphosphate kinase, formate dehydrogenase, and FMN reductase, which use prenol, polyphosphate, formate, ATP, NAD⁺, and FMN as substrates and cofactors. Under aerobic conditions, this cascade produced prFMN from FMN with over 98% conversion and activated purified ferulic acid decarboxylase Fdc1 from Aspergillus niger and protocatechuic acid decarboxylase ENC0058 from Enterobacter cloaceae. The in vivo system for FMN prenylation and UbiD activation is based on the coexpression of Fdc1 and UbiX in Escherichia coli cells under aerobic conditions in the presence of prenol. The in vitro and in vivo FMN prenylation cascades will facilitate functional characterization of novel UbiDs and their applications.

Non-Oxidative Enzymatic (De)Carboxylation of (Hetero)Aromatics and Acrylic Acid Derivatives

The utilization of carbon dioxide as a C1-building block for the production of valuable chemicals has recently attracted much interest. Whereas chemical CO2 fixation is dominated by C-O and C-N bond forming reactions, the development of novel concepts for the carboxylation of C-nucleophiles, which leads to the formation of carboxylic acids, is highly desired. Beside transition metal catalysis, biocatalysis has emerged as an attractive method for the highly regioselective (de)carboxylation of electron-rich (hetero)aromatics, which has been recently further expanded to include conjugated α,β-unsaturated (acrylic) acid derivatives. Depending on the type of substrate, different classes of enzymes have been explored for (i) the ortho-carboxylation of phenols catalyzed by metal-dependent ortho-benzoic acid decarboxylases and (ii) the side-chain carboxylation of para-hydroxystyrenes mediated by metal-independent phenolic acid decarboxylases. Just recently, the portfolio of bio-carboxylation reactions was complemented by (iii) the para-carboxylation of phenols and the decarboxylation of electron-rich heterocyclic and acrylic acid derivatives mediated by prenylated FMN-dependent decarboxylases, which is the main focus of this review. Bio(de)carboxylation processes proceed under physiological reaction conditions employing bicarbonate or (pressurized) CO2 when running in the energetically uphill carboxylation direction. Aiming to facilitate the application of these enzymes in preparative-scale biotransformations, their catalytic mechanism and substrate scope are analyzed in this review.

The UbiX flavin prenyltransferase reaction mechanism resembles class I terpene cyclase chemistry

The UbiX-UbiD enzymes are widespread in microbes, acting in concert to decarboxylate alpha-beta unsaturated carboxylic acids using a highly modified flavin cofactor, prenylated FMN (prFMN). UbiX serves as the flavin prenyltransferase, extending the isoalloxazine ring system with a fourth non-aromatic ring, derived from sequential linkage between a dimethylallyl moiety and the FMN N5 and C6. Using structure determination and solution studies of both dimethylallyl monophosphate (DMAP) and dimethyallyl pyrophosphate (DMAPP) dependent UbiX enzymes, we reveal the first step, N5-C1' bond formation, is contingent on the presence of a dimethylallyl substrate moiety. Hence, an SN1 mechanism similar to other prenyltransferases is proposed. Selected variants of the (pyro)phosphate binding site are unable to catalyse subsequent Friedel-Crafts alkylation of the flavin C6, but can be rescued by addition of (pyro)phosphate. Thus, retention of the (pyro)phosphate leaving group is required for C6-C3' bond formation, resembling pyrophosphate initiated class I terpene cyclase reaction chemistry.

A comparison between the homocyclic aromatic metabolic pathways from plant-derived compounds by bacteria and fungi

Aromatic compounds derived from lignin are of great interest for renewable biotechnical applications. They can serve in many industries e.g. as biochemical building blocks for bioplastics or biofuels, or as antioxidants, flavor agents or food preservatives. In nature, lignin is degraded by microorganisms, which results in the release of homocyclic aromatic compounds. Homocyclic aromatic compounds can also be linked to polysaccharides, tannins and even found freely in plant biomass. As these compounds are often toxic to microbes already at low concentrations, they need to be degraded or converted to less toxic forms. Prior to ring cleavage, the plant- and lignin-derived aromatic compounds are converted to seven central ring-fission intermediates, i.e. catechol, protocatechuic acid, hydroxyquinol, hydroquinone, gentisic acid, gallic acid and pyrogallol through complex aromatic metabolic pathways and used as energy source in the tricarboxylic acid cycle. Over the decades, bacterial aromatic metabolism has been described in great detail. However, the studies on fungal aromatic pathways are scattered over different pathways and species, complicating a comprehensive view of fungal aromatic metabolism. In this review, we depicted the similarities and differences of the reported aromatic metabolic pathways in fungi and bacteria. Although both microorganisms share the main conversion routes, many alternative pathways are observed in fungi. Understanding the microbial aromatic metabolic pathways could lead to metabolic engineering for strain improvement and promote valorization of lignin and related aromatic compounds.

A Pyrus communis gene for p-hydroxystyrene biosynthesis, has a role in defense against the pear psylla Cacopsylla biden

Styrene analogs are known to be naturally synthesized in the leaves of pears and in other plant species, including several trees in the Styracaceae family. Styrene analogs are potential contributors to the aroma of wine, perfumes, pharmaceuticals, and other fermented foods and beverages. In addition, styrene analogs perform important ecological functions such as insecticidal and antifeedant activities against insects. We showed here that exogenous applications of styrene and p-hydroxystyrene caused a dramatic reduction the number of eggs laid by psylla and of subsequent nymph survival. Despite their importance specific reactions that lead to the biosynthesis of the styrene analogs in pear are unknown. To identify genes involved in the synthesis of these metabolites, existing genome databases of the Rosaceae were screened for pear genes with significant sequence similarity to bacterial phenolic acid decarboxylase. Herein described are the isolation and characterization of a pear phenolic acid decarboxylase, designated PyPAD1, which catalyzed the decarboxylation of p-coumaric acid and ferulic acid to p-hydroxystyrene and 3-methoxy-4-hydroxystyrene respectively. Its apparent Km values for p-coumaric acid and ferulic acid were 34.42 and 84.64 μM, respectively. The PyPAD1 preferred p-coumaric acid to ferulic acid as a substrate by a factor of 2.4 when comparing catalytic efficiencies in vitro. Expression analysis of PyPAD1 showed that the gene was transcribed in all five pear genotypes examined. However, transcript abundance was increased in correlation with the presence of p-hydroxystyrene in resistant cultivars Py-701 and Py-760 and in the sensitive cultivar Spadona when grafted on these resistant cultivars. Thus, PyPAD1 appears to be responsible for the decarboxylation of the p-coumaric acid, and for the production of metabolites that are active against pear psylla.

Prenylated FMN: Biosynthesis, purification, and Fdc1 activation

Prenylated flavin mononucleotide (prFMN) is a recently discovered flavin cofactor produced by the UbiX family of FMN prenyltransferases, and is required for the activity of UbiD-like reversible decarboxylases. The latter enzymes are known to be involved in ubiquinone biosynthesis and biotransformation of lignin, aromatic compounds, and unsaturated aliphatic acids. However, exploration of uncharacterized UbiD proteins for biotechnological applications is hindered by our limited knowledge about the biochemistry of prFMN and prFMN-dependent enzymes. Here, we describe experimental protocols and considerations for the biosynthesis of prFMN in vivo and in vitro, in addition to cofactor extraction and application for activation of UbiD proteins.

Exploring the substrate scope of ferulic acid decarboxylase (FDC1) from Saccharomyces cerevisiae

Ferulic acid decarboxylase from Saccharomyces cerevisiae (ScFDC1) was described to possess a novel, prenylated flavin mononucleotide cofactor (prFMN) providing the first enzymatic 1,3-dipolar cycloaddition mechanism. The high tolerance of the enzyme towards several non-natural substrates, combined with its high quality, atomic resolution structure nominates FDC1 an ideal candidate as flexible biocatalyst for decarboxylation reactions leading to synthetically valuable styrenes. Herein the substrate scope of ScFDC1 is explored on substituted cinnamic acids bearing different functional groups (–OCH₃, –CF₃ or –Br) at all positions of the phenyl ring (o−, m−, p−)_, as well as on several biaryl and heteroaryl cinnamic acid analogues or derivatives with extended alkyl chain. It was found that E. coli whole cells expressing recombinant ScFDC1 could transform a large variety of substrates with high conversion, including several bulky aryl and heteroaryl cinnamic acid analogues, that characterize ScFDC1 as versatile and highly efficient biocatalyst. Computational studies revealed energetically favoured inactive binding positions and limited active site accessibility for bulky and non-linear substrates, such as 2-phenylthiazol-4-yl-, phenothiazine-2-yl- and 5-(4-bromophenyl)furan-2-yl) acrylic acids. In accordance with the computational predictions, site-directed mutagenesis of residue I330 provided variants with catalytic activity towards phenothiazine-2-yl acrylic acid and provides a basis for altering the substrate specificity of ScFDC1 by structure based rational design.

Anaerobic degradation of xenobiotic isophthalate by the fermenting bacterium Syntrophorhabdus aromaticivorans

Syntrophorhabdus aromaticivorans is a syntrophically fermenting bacterium that can degrade isophthalate (3-carboxybenzoate). It is a xenobiotic compound which has accumulated in the environment for more than 50 years due to its global industrial usage and can cause negative effects on the environment. Isophthalate degradation by the strictly anaerobic S. aromaticivorans was investigated to advance our understanding of the degradation of xenobiotics introduced into nature, and to identify enzymes that might have ecological significance for bioremediation. Differential proteome analysis of isophthalate- vs benzoate-grown cells revealed over 400 differentially expressed proteins of which only four were unique to isophthalate-grown cells. The isophthalate-induced proteins include a phenylacetate:CoA ligase, a UbiD-like decarboxylase, a UbiX-like flavin prenyltransferase, and a hypothetical protein. These proteins are encoded by genes forming a single gene cluster that putatively codes for anaerobic conversion of isophthalate to benzoyl-CoA. Subsequently, benzoyl-CoA is metabolized by the enzymes of the anaerobic benzoate degradation pathway that were identified in the proteomic analysis. In vitro enzyme assays with cell-free extracts of isophthalate-grown cells indicated that isophthalate is activated to isophthalyl-CoA by an ATP-dependent isophthalate:CoA ligase (IPCL), and subsequently decarboxylated to benzoyl-CoA by a UbiD family isophthalyl-CoA decarboxylase (IPCD) that requires a prenylated flavin mononucleotide (prFMN) cofactor supplied by UbiX to effect decarboxylation. Phylogenetic analysis revealed that IPCD is a novel member of the functionally diverse UbiD family (de)carboxylases. Homologs of the IPCD encoding genes are found in several other bacteria, such as aromatic compound-degrading denitrifiers, marine sulfate-reducers, and methanogenic communities in a terephthalate-degrading reactor. These results suggest that metabolic strategies adapted for degradation of isophthalate and other phthalate are conserved between microorganisms that are involved in the anaerobic degradation of environmentally relevant aromatic compounds.

Chemoenzymatic cascade for stilbene production from cinnamic acid catalyzed by ferulic acid decarboxylase and an artificial metathease

We report a chemoenzymatic cascade reaction for stilbene production combining decarboxylation and olefin metathesis with efficient removal of metal contamination.

Corynebacterium Cell Factory Design and Culture Process Optimization for Muconic Acid Biosynthesis

Muconic acid (MA) is a valuable compound for adipic acid production, which is a precursor for the synthesis of various polymers such as plastics, coatings, and nylons. Although MA biosynthesis has been previously reported in several bacteria, the engineered strains were not satisfactory owing to low MA titers. Here, we generated an engineered Corynebacterium cell factory to produce a high titer of MA through 3-dehydroshikimate (DHS) conversion to MA, with heterologous expression of foreign protocatechuate (PCA) decarboxylase genes. To accumulate key intermediates in the MA biosynthetic pathway, aroE (shikimate dehydrogenase gene), pcaG/H (PCA dioxygenase alpha/beta subunit genes) and catB (chloromuconate cycloisomerase gene) were disrupted. To accomplish the conversion of PCA to catechol (CA), a step that is absent in Corynebacterium, a codon-optimized heterologous PCA decarboxylase gene was expressed as a single operon under the strong promoter in a aroE-pcaG/H-catB triple knock-out Corynebacterium strain. This redesigned Corynebacterium, grown in an optimized medium, produced about 38 g/L MA and 54 g/L MA in 7-L and 50-L fed-batch fermentations, respectively. These results show highest levels of MA production demonstrated in Corynebacterium, suggesting that the rational cell factory design of MA biosynthesis could be an alternative way to complement petrochemical-based chemical processes.

Flavin metamorphosis: cofactor transformation through prenylation

Prenylated flavin (prFMN) is a recently discovered cofactor that underpins catalysis in the ubiquitous microbial UbiDX system. UbiX acts as a flavin prenyltransferase while UbiD is a prFMN-dependent reversible (de)carboxylase. The extensive modification of flavin by prenylation, and the consecutive oxidation to the prFMNiminium azomethine ylide, leads to cofactor metamorphosis. While prFMN is no longer able to perform N5-based classical flavin chemistry, it is capable of forming cycloadducts with dipolarophiles, long-lived C4a-based radical species as well as undergoing extensive light driven isomerization. An ever-expanding range of distinct prFMN forms hints at the possibility of novel prFMN driven biochemistry yet to be discovered.

Ligand-Driven Conformational Dynamics Influences Selectivity of UbiX

Up until now, it has remained elusive as to why the flavin prenyltransferase UbiX requires dimethylallyl monophosphate (DMAP) as one of its cosubstrates instead of dimethylallyl pyrophosphate (DMAPP), even though the former is not used in metabolic pathways, while the latter is a common isoprenoid precursor. Herein, mainly on the basis of molecular dynamics (MD) simulations, we demonstrate that the selectivity of UbiX may be governed by its conformational dynamics. The hydrogen-bonding network of UbiX does not facilitate a proper encompassing of DMAPP. This induces significant conformational changes of the enzyme that result mostly in unreactive trajectories, whereas DMAP remains at a catalytically competent position throughout the performed simulations. Within the presented study, we provide a justification for the atypical selectivity of UbiX.

Biochemical and Structural Characterization of TtnD, a Prenylated FMN-Dependent Decarboxylase from the Tautomycetin Biosynthetic Pathway

Tautomycetin (TTN) is a polyketide natural product featuring a terminal alkene. Functional characterization of the genes within the ttn gene cluster from Streptomyces griseochromogenes established the biosynthesis of the TTN polyketide backbone, its dialkylmaleic anhydride moiety, the coupling of the two moieties to form the nascent intermediate TTN F-1, and the tailoring steps converting TTN F-1 to TTN. Here, we report biochemical and structural characterization of TtnD, a prenylated FMN (prFMN)-dependent decarboxylase belonging to the UbiD family that catalyzes the penultimate step of TTN biosynthesis. TtnD catalyzes decarboxylation of TTN D-1 to TTN I-1, utilizing prFMN as a cofactor generated by the TtnC flavin prenyltransferase; both TtnD and TtnC are encoded within the ttn biosynthetic gene cluster. TtnD exhibits substrate promiscuity but accepts only TTN D-1 congeners that feature an α,β-unsaturated acid, supporting the [3+2] cycloaddition mechanism during catalysis that requires the double bond of an α,β-unsaturated acid substrate. TtnD shares a similar overall structure with other members of the UbiD family but forms a homotetramer in solution. Each protomer is composed of three domains with the active site located between the middle and C-terminal domains; R169-E272-E277, constituting the catalytic triad, and E228, involved in Mn(II)-mediated binding of prFMN, were confirmed by site-directed mutagenesis. TtnD represents the first example of a prFMN-dependent decarboxylase involved in polyketide biosynthesis, expanding the substrate scope of the UbiD family of decarboxylases beyond simple aromatic and cinnamic acids. TtnD and its homologues are widespread in nature and could be exploited as biocatalysts for organic synthesis.

Terminal Alkenes from Acrylic Acid Derivatives via Non-Oxidative Enzymatic Decarboxylation by Ferulic Acid Decarboxylases

Fungal ferulic acid decarboxylases (FDCs) belong to the UbiD-family of enzymes and catalyse the reversible (de)carboxylation of cinnamic acid derivatives through the use of a prenylated flavin cofactor. The latter is synthesised by the flavin prenyltransferase UbiX. Herein, we demonstrate the applicability of FDC/UbiX expressing cells for both isolated enzyme and whole-cell biocatalysis. FDCs exhibit high activity with total turnover numbers (TTN) of up to 55000 and turnover frequency (TOF) of up to 370 min-1. Co-solvent compatibility studies revealed FDC's tolerance to some organic solvents up 20 % v/v. Using the in-vitro (de)carboxylase activity of holo-FDC as well as whole-cell biocatalysts, we performed a substrate profiling study of three FDCs, providing insights into structural determinants of activity. FDCs display broad substrate tolerance towards a wide range of acrylic acid derivatives bearing (hetero)cyclic or olefinic substituents at C3 affording conversions of up to >99 %. The synthetic utility of FDCs was demonstrated by a preparative-scale decarboxylation.

An Engineered Aro1 Protein Degradation Approach for Increased cis,cis-Muconic Acid Biosynthesis in Saccharomyces cerevisiae

Muconic acid (MA) is a chemical building block and precursor to adipic and terephthalic acids used in the production of nylon and polyethylene terephthalate polymer families. Global demand for these important materials, coupled to their dependence on petrochemical resources, provides substantial motivation for the microbial synthesis of MA and its derivatives. In this context, the Saccharomyces cerevisiae yeast shikimate pathway can be sourced as a precursor for the formation of MA. Here we report a novel strategy to balance MA pathway performance with aromatic amino acid prototrophy by destabilizing Aro1 through C-terminal degron tagging. Coupling of a composite MA production pathway to degron-tagged Aro1 in an aro3Δ aro4Δ mutant background led to the accumulation of 5.6 g/liter protocatechuic acid (PCA). However, metabolites downstream of PCA were not detected, despite the inclusion of genes mediating their biosynthesis. Because CEN.PK family strains of S. cerevisiae lack the activity of Pad1, a key enzyme supporting PCA decarboxylase activity, chromosomal expression of intact PAD1 alleviated this bottleneck, resulting in nearly stoichiometric conversion (95%) of PCA to downstream products. In a fed-batch bioreactor, the resulting strain produced 1.2 g/liter MA under prototrophic conditions and 5.1 g/liter MA when supplemented with amino acids, corresponding to a yield of 58 mg/g sugar.IMPORTANCE Previous efforts to engineer a heterologous MA pathway in Saccharomyces cerevisiae have been hindered by a bottleneck at the PCA decarboxylation step and the creation of aromatic amino acid auxotrophy through deleterious manipulation of the pentafunctional Aro1 protein. In light of these studies, this work was undertaken with the central objective of preserving amino acid prototrophy, which we achieved by employing an Aro1 degradation strategy. Moreover, resolution of the key PCA decarboxylase bottleneck, as detailed herein, advances our understanding of yeast MA biosynthesis and will guide future strain engineering efforts. These strategies resulted in the highest titer reported to date for muconic acid produced in yeast. Overall, our study showcases the effectiveness of careful tuning of yeast Aro1 activity and the importance of host-pathway dynamics.

Discovery and characterization of the tubercidin biosynthetic pathway from Streptomyces tubercidicus NBRC 13090

Background

Tubercidin (TBN), an adenosine analog with potent antimycobacteria and antitumor bioactivities, highlights an intriguing structure, in which a 7-deazapurine core is linked to the ribose moiety by an N-glycosidic bond. However, the molecular logic underlying the biosynthesis of this antibiotic has remained poorly understood.

Results

Here, we report the discovery and characterization of the TBN biosynthetic pathway from Streptomyces tubercidicus NBRC 13090 via reconstitution of its production in a heterologous host. We demonstrated that TubE specifically utilizes phosphoribosylpyrophosphate and 7-carboxy-7-deazaguanine for the precise construction of the deazapurine nucleoside scaffold. Moreover, we provided biochemical evidence that TubD functions as an NADPH-dependent reductase, catalyzing irreversible reductive deamination. Finally, we verified that TubG acts as a Nudix hydrolase, preferring Co²⁺ for the maintenance of maximal activity, and is responsible for the tailoring hydrolysis step leading to TBN.

Conclusions

These findings lay a foundation for the rational generation of TBN analogs through synthetic biology strategy, and also open the way for the target-directed search of TBN-related antibiotics.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-0978-8) contains supplementary material, which is available to authorized users.

Selection of Pof-Saccharomyces eubayanus Variants for the Construction of S. cerevisiae × S. eubayanus Hybrids With Reduced 4-Vinyl Guaiacol Formation

Saccharomyces pastorianus is an interspecies hybrid between S. cerevisiae and S. eubayanus. The identification of the parental species of S. pastorianus enabled the de novo reconstruction of hybrids that could potentially combine a wide array of phenotypic traits. Lager yeasts are characterized by their inability to decarboxylate ferulic acid present in wort, a phenotype also known as Pof ^- (phenolic off-flavor). However, all known S. eubayanus strains characterized so far produce clove-like aroma specific of 4-vinyl guaiacol, a decarboxylated form of ferulic acid. This study explored a non-GMO approach to construct Pof ^-S. eubayanus variants derived from the parental strain S. eubayanus CBS 12357. To rapidly screen a population of UV-mutagenized cells two complementary assays were developed. The first assay was based on the difference of light absorption spectra of ferulic acid and 4-vinyl guaiacol, while the second was based on the difference of sensitivity of Pof ^- and Pof⁺ strains to cinnamic acid. The S. eubayanus variant HTSE042 was selected and was confirmed not to produce 4-vinyl guaiacol. Whole genome sequencing revealed that this variant lost the subtelomeric region of the CHRXIII right arm that carried the two clustered genes SePAD1- SeFDC1 whose deletion in a naïve S. eubayanus strain (CBS 12357/FM1318) resulted in an identical phenotype. Subsequently, the Pof ^- variant was crossed with a Pof^-S. cerevisiae partner. The resulting hybrid was not able to convert ferulic acid demonstrating the undisputable value of the mutagenized variant HTSE042 to eventually construct S. cerevisiae × S. eubayanus hybrids with phenotypic characteristics of S. pastorianus.

Biosynthesis and Activity of Prenylated FMN Cofactors

Prenylated flavin mononucleotide (prFMN) is a recently discovered cofactor required by the UbiD family of reversible decarboxylases involved in ubiquinone biosynthesis, biological decomposition of lignin, and biotransformation of aromatic compounds. This cofactor is synthesized by UbiX-like prenyltransferases catalyzing the transfer of the dimethylallyl moiety of dimethylallyl-monophosphate (DMAP) to FMN. The origin of DMAP for prFMN biosynthesis and the biochemical properties of free prFMN are unknown. We show that in Escherichia coli cells, DMAP can be produced by phosphorylating prenol using ThiM or dephosphorylating DMAPP using Nudix hydrolases. We produced 14 active prenyltransferases whose properties enabled the purification and characterization of protein-free forms of prFMN. In vitro assays revealed that the UbiD-like ferulate decarboxylase (Fdc1) can be activated by free prFMN_iminium or C2'-hydroxylated prFMN_iminium under both oxidized and reduced conditions. These insights into the biosynthesis and properties of prFMN will facilitate further elucidation of the biochemical diversity of reversible UbiD (de)carboxylases.

Mechanistic insights into the catalytic reaction of ferulic acid decarboxylase from Aspergillus niger: a QM/MM study

Ubiquinone plays a pivotal role in the aerobic cellular respiratory electron transport chain, whereas ferulic acid decarboxylase (FDC) is involved in the biosynthesis of ubiquinone precursor. Recently, the complete crystal structure of FDC (based on the co-expression of the A. niger fdc1 gene in E. coli with the associated ubix gene from E. coli) at high resolution was reported. Herein, the detailed catalytic non-oxidative decarboxylation mechanism of FDC has been investigated by a combined quantum mechanics/molecular mechanics (QM/MM) approach. Calculation results indicate that, after the 1,3-dipolar cycloaddition of the substrate and cofactor, the carboxylic group can readily split off from the adduct, and the overall energy barrier of the whole catalytic reaction is 23.5 kcal mol^-1. According to the energy barrier analysis, the protonation step is rate-limiting. The conserved protonated Glu282 is suggested to be the proton donor through a "water bridge". Besides, two cases, that is, the generated CO₂ escapes from the active site or remains in the active site, were considered. It was found that the prolonged leaving of CO₂ can facilitate the protonation of the intermediate. In particular, our calculations shed light on the detailed function of both cofactors prFMN^iminium and prFMN^ketamine in the decarboxylation step. The cofactor prFMN^iminium is the catalytically relevant species compared with prFMN^ketamine.

Chemical genomic guided engineering of gamma-valerolactone tolerant yeast

Background

Gamma valerolactone (GVL) treatment of lignocellulosic bomass is a promising technology for degradation of biomass for biofuel production; however, GVL is toxic to fermentative microbes. Using a combination of chemical genomics with the yeast (Saccharomyces cerevisiae) deletion collection to identify sensitive and resistant mutants, and chemical proteomics to monitor protein abundance in the presence of GVL, we sought to understand the mechanism toxicity and resistance to GVL with the goal of engineering a GVL-tolerant, xylose-fermenting yeast.

Results

Chemical genomic profiling of GVL predicted that this chemical affects membranes and membrane-bound processes. We show that GVL causes rapid, dose-dependent cell permeability, and is synergistic with ethanol. Chemical genomic profiling of GVL revealed that deletion of the functionally related enzymes Pad1p and Fdc1p, which act together to decarboxylate cinnamic acid and its derivatives to vinyl forms, increases yeast tolerance to GVL. Further, overexpression of Pad1p sensitizes cells to GVL toxicity. To improve GVL tolerance, we deleted PAD1 and FDC1 in a xylose-fermenting yeast strain. The modified strain exhibited increased anaerobic growth, sugar utilization, and ethanol production in synthetic hydrolysate with 1.5% GVL, and under other conditions. Chemical proteomic profiling of the engineered strain revealed that enzymes involved in ergosterol biosynthesis were more abundant in the presence of GVL compared to the background strain. The engineered GVL strain contained greater amounts of ergosterol than the background strain.

Conclusions

We found that GVL exerts toxicity to yeast by compromising cellular membranes, and that this toxicity is synergistic with ethanol. Deletion of PAD1 and FDC1 conferred GVL resistance to a xylose-fermenting yeast strain by increasing ergosterol accumulation in aerobically grown cells. The GVL-tolerant strain fermented sugars in the presence of GVL levels that were inhibitory to the unmodified strain. This strain represents a xylose fermenting yeast specifically tailored to GVL produced hydrolysates.

Electronic supplementary material

The online version of this article (10.1186/s12934-017-0848-9) contains supplementary material, which is available to authorized users.

Selective production of linear α-olefins via catalytic deoxygenation of fatty acids and derivatives

Various homogeneous, heterogeneous, and enzyme catalysis strategies for the selective synthesis of linear α-olefins from fatty acids and their derivatives are reviewed.