Principles of Mononucleating and Binucleating Ligand Design

Functionalization of a porous copper(ii) metal-organic framework and its capacity for loading and delivery of ibuprofen

A porous copper(ii) metal-organic framework (MOF) of 4,4',4''-tri-tert-butyl-2,2':6',2''-terpyridine(N3ttb) and 5-nitroisophthalic acid (npd) formulated as [Cu(npd)(N3ttb)]·(DMF)(H2O) 1 (DMF = dimethylformamide) was synthesized and characterized by elemental analyses, spectroscopic techniques, single crystal X-ray crystallography, and scanning electron microscopy. Single crystal X-ray crystallographic analysis of the copper(ii) metal-organic framework reveals a monoclinic crystal system with space group P21/c. The copper(ii) ion is in a five-coordinate geometry consisting of three meridional nitrogen atoms of 4,4',4''-tri-tert-butyl-2,2':6',2''-terpyridine and two oxygen atoms of 5-nitroisophthalic acid to form a square pyramidal structure. The compound was functionalized with ethylenediamine (ED) to form [Cu(npd)(N3ttb)]-ED 2 that was characterized by FT-IR, PXRD, SEM-EDX and BET and the drug loading capacity was investigated and compared with that of as-synthesized MOFs. The amount of ibuprofen loaded was 916.44 mg g-1 (15.27%) & 1530.20 mg g-1 (25.50%) over 1 and 2, respectively. The results indicate that the functionalized MOFs 2 have a higher loading capacity for ibuprofen than 1 by 613.76 mg g-1 (10.23%), which could be ascribed to the acid-base interactions in the functionalized molecules. The results show that [Cu(npd)(N3ttb)]-ED 2 is a better drug transporter than [Cu(npd)(N3ttb)]·(DMF)(H2O) 1 due to the presence of an amine functional group that interacts with the acid group on the ibuprofen through non-covalent bonds interactions.

Signal Transduction in Artificial Cells

In recent years, significant progress has been made in the emerging field of constructing biomimetic soft compartments with life-like behaviors. Given that biological activities occur under a flux of energy and matter exchange, the implementation of rudimentary signaling pathways in artificial cells (protocells) is a prerequisite for the development of adaptive sense-response phenotypes in cytomimetic models. Herein, recent approaches to the integration of signal transduction modules in model protocells prepared by bottom-up construction are discussed. The approaches are classified into two categories involving invasive biochemical signals or non-invasive physical stimuli. In the former mechanism, transducers with intrinsic recognition capability respond with high specificity, while in the latter, artificial cells respond through intra-protocellular energy transduction. Although major challenges remain in the pursuit of a sophisticated artificial signaling network for the orchestration of higher-order cytomimetic models, significant advances have been made in establishing rudimentary protocell communication networks, providing novel organizational models for the development of life-like microsystems and new avenues in protoliving technologies.

Binuclear Complexes Supported by a Tetrapyridyl Ligand with a Bending Anthraquinodimethane Linker

A tetrapyridyl ligand with a bending anthraquinodimethane linker has been synthesized, and its complexation with coinage metals has been examined. The treatment of the ligand with Ag(I) and Au(I) cations afforded binuclear complexes, wherein the two metal centers were in close proximity to the inside space of the ligand. X-ray analyses corroborated with theoretical calculations indicated that the ligand has reasonable flexibility toward a bending deformation of the linker moiety to provide a ligand pocket suitable for the proximal binuclear complexes, even though such deformations accompany a non-negligible amount of energetic cost. On the other hand, treatment with 2 equiv of Cu(I) salt afforded a binuclear complex, in which both copper atoms were coordinated at the periphery of the ligand.

A metal-organic framework-supported dinuclear iron catalyst for hydroboration of carbonyl compounds

Preparation of catalytically active dinuclear transition metal complexes with an open coordination sphere is a challenging task because the metal sites tend to be "saturated" with excess donor atoms around during synthesis. By isolating the binding scaffolds with the metal-organic framework (MOF) skeleton and installing metal sites through post-synthetic modification, we succeed in constructing a MOF-supported metal catalyst, namely FICN-7-Fe2, with dinuclear Fe₂ sites. FICN-7-Fe2 effectively catalyses the hydroboration of a broad range of ketone, aldehyde, and imine substrates with a low loading of 0.05 mol%. Remarkably, kinetic measurements showed that FICN-7-Fe2 is 15 times more active than its mononuclear counterpart FICN-7-Fe1, indicating that cooperative substrate activation on the two Fe centres significantly enhances the catalysis.

Bimetallic Nickel Complexes Supported by a Planar Macrocyclic Diphosphoranide Ligand

Metal-metal cooperativity is emerging as an important strategy in catalysis. This requires appropriate ligand scaffolds that can support two metals in close proximity. Here we report nickel-promoted formation of a dinucleating planar macrocyclic ligand that can support bimetallic dinickel(II) and dinickel(I) complexes. Reaction outcomes can be tuned by variation of the substituents and reaction conditions to favour dinucleating macrocyclic, mononucleating macrocyclic or conventional pincer architectures.

N^N vs. N^E (E = S or Se) coordination behavior of imino-phosphanamidinate chalcogenide ligands towards aluminum alkyls: efficient hydroboration catalysis of nitriles, alkynes, and alkenes

The synthesis, characterization, and catalytic application of six aluminum alkyl complexes supported by various imino-phosphanamidinate chalcogenide ligands are described. Six different unsymmetrical imino-phosphanamidinate chalcogenide ligands [NHI^RP(Ph)(E)NH-Dipp] [R = 2,6-diisopropylphenyl (Dipp), E = S (2a-H), Se (2b-H); R = mesityl (Mes), E = S (3a-H), Se (3b-H); R = tert-butyl (^tBu), E = S (4a-H), Se (4b-H)] were prepared by the oxidation of respective imino-phosphanamide ligands (1a, 1b and 1c) with elemental chalcogen atoms (S and Se). The aluminum complexes with imino-phosphanamidinate chalcogenide ligands with the general formulae [κ²_NN-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = Dipp, E = S (5a), Se (5b); R = Mes, E = S (6a), Se (6b)] or [κ²_NE-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = ^tBu, E = S (7a), Se (7b)] were synthesized in good yields from the reaction of the suitable protic ligands (2a,b-H-4a,b-H) and trimethylaluminum in a 1 : 1 molar ratio in toluene at room temperature. All the protic ligands and aluminum complexes were well characterized by multi-nuclear NMR spectroscopy, and the solid-state structures of 2a,b-H-4a,b-H, 5a,b-6a,b and 7b are established by single crystal X-ray diffraction analysis. The aluminum complexes 5a,b-7a,b were tested as catalysts for the hydroboration of nitriles, alkynes, and alkenes under mild conditions. The catalytic hydroboration reactions of nitriles, alkynes, and alkenes were accomplished with complex 5b at a mild temperature under solvent-free conditions to afford a high yield of the corresponding N,N-diborylamines, vinylboranes and alkyl boronate esters, respectively.

The pyridazine heterocycle in molecular recognition and drug discovery

The pyridazine ring is endowed with unique physicochemical properties, characterized by weak basicity, a high dipole moment that subtends π-π stacking interactions and robust, dual hydrogen-bonding capacity that can be of importance in drug-target interactions. These properties contribute to unique applications in molecular recognition while the inherent polarity, low cytochrome P450 inhibitory effects and potential to reduce interaction of a molecule with the cardiac hERG potassium channel add additional value in drug discovery and development. The recent approvals of the gonadotropin-releasing hormone receptor antagonist relugolix (24) and the allosteric tyrosine kinase 2 inhibitor deucravacitinib (25) represent the first examples of FDA-approved drugs that incorporate a pyridazine ring. In this review, the properties of the pyridazine ring are summarized in comparison to the other azines and its potential in drug discovery is illustrated through vignettes that explore applications that take advantage of the inherent physicochemical properties as an approach to solving challenges associated with candidate optimization.

Graphical Abstract

Electrocatalytic CO2 Reduction with a Binuclear Bis-Terpyridine Pyrazole-Bridged Cobalt Complex

A pyrazole-based ligand substituted with terpyridine groups at the 3 and 5 positions has been synthesized to form the dinuclear cobalt complex 1, that electrocatalytically reduces carbon dioxide (CO₂ ) to carbon monoxide (CO) in the presence of Brønsted acids in DMF. Chemical, electrochemical and UV-vis spectro-electrochemical studies under inert atmosphere indicate pairwise reduction processes of complex 1. Infrared spectro-electrochemical studies under CO₂ and CO atmosphere are consistent with a reduced CO-containing dicobalt complex which results from the electroreduction of CO₂ . In the presence of trifluoroethanol (TFE), electrocatalytic studies revealed single-site mechanism with up to 94 % selectivity towards CO formation when 1.47 M TFE were present, at -1.35 V vs. Saturated Calomel Electrode in DMF (0.39 V overpotential). The low faradaic efficiencies obtained (<50 %) are attributed to the generation of CO-containing species formed during the electrocatalytic process, which inhibit the reduction of CO₂ .

High-Throughput Approach for Facile Access to Hetero-Dinuclear Synergistic Metal Complex for H2O2 Activation and Its Implications

Hetero-dinuclear synergic catalysis is a promising approach for improving catalytic performance. However, employing it is challenging because the design principles for the metal complex are still not well understood. Further, these complexes have a broader set of possibilities than mononuclear or homometallic systems, increasing the time and effort required to understand them. In this study, we explored a high-throughput approach to obtain a new hetero-dinuclear synergistic metal complex for H₂O₂ activation. From the 1152 combinations of metal complex candidates obtained by changing three variables (metal ions, unsymmetrical dinucleating ligands, and pH), the lead complex (L3-(Ni, Co)), which has the highest peroxidase activity, was derived using colorimetric parallel analysis. A series of control experiments revealed that L3 plays a crucial role in the formation of active L3-(Ni, Co) complexes, Co²⁺ acts as a catalytic center, and Ni²⁺ serves as an assistant catalytic site within L3-(Ni, Co). In addition, the catalytic efficiency of L3-(Ni, Co), which was 125 times that of the homo-bimetallic complex (L3-(Co, Co)), revealed clear hetero-bimetallic synergism in the buffer. The ultraviolet-visible study and electron paramagnetic resonance-based spin-trap experiment provided mechanistic insight into H₂O₂ activation by the intermediate, which was found to be induced by the reaction of L3-(Ni, Co) and H₂O₂. Moreover, the intermediate could act as a donor of the hydroperoxyl radical (^•OOH) in the buffer. Furthermore, L3-(Ni, Co) demonstrated potential for application as a signal transducer for H₂O₂ in an enzyme-coupled cascade assay that can be used for the colorimetric detection of glucose.

Tunable Construction of Sandwich-Type Double-[1 + 1] and Half-Folded [2 + 2] Schiff-Base Complexes Controlled by the Combination of Primary and Secondary Template Effects

The first-row transition-metal ions Mn²⁺-Cu²⁺ could serve as effective templates to construct three types of double-[1 + 1], [2 + 2], and [1 + 1] Schiff-base dinuclear macrocyclic complexes in the presence of dialdehydes with different pendant arms and a common 1,8-diamine. The extremely flexible nature of macrocyclic ligands allows for the multiple template-directed syntheses, but the final products could be finely tuned by the subtle variations of Mn²⁺-Cu²⁺ ions in a 3d-electronic configuration, radius, and coordination number/geometry as well as the auxiliary (pendant-armed and anionic) template effect at the same time. Two borderlines are observed at the Co²⁺ ion for forming double-[1 + 1] and [2 + 2] metallacycles involving the H₂pdd precursor and the [1 + 1] Cu²⁺ complex for double-[1 + 1] and [2 + 2] macrocycles containing the H₂hpdd unit, respectively. The structural diversity is originated from the non-perfect match between [1 + 1]/[2 + 2] Schiff-base macrocycles and dinuclear metal centers; hence, a compromise between the metal coordination modes and alterations of the ligand conformation takes place.

New Derivatives of 5-((1-Methyl-Pyrrol-2-yl) Methyl)-4-(Naphthalen-1-yl)-1,2,4-Triazoline-3-Thione and Its Coordination Compounds with Anticancer Activity

A new ligand 5-((1-methyl-pyrrol-2-yl) methyl)-4-(naphthalen-1-yl)-1,2,4-triazoline-3-thione (C15) and its metal complexes with formulae: Mn(C15)Cl₂MeOH (1), Fe(C15)Cl₂MeOH (2), Ni(C15)Cl₂MeOH (3), Cu(C15)₂Cl₂ (4) and Zn(C15)₄Cl₂ (5) have been synthesized. The C15 ligand and complexes were characterized by NMR, elemental analysis, FT-IR, EPR, magnetic and TGA studies. The anticancer activities of the organic ligand (C15) and complexes (1–5) were evaluated against human colon adenocarcinoma (HT29) and human lung (A549) cancer cell lines. The complex (1) exhibited potential activity at concentration of 794.37 μM (A549) and 654.31 μM (HT29) in both cancer cells. The complex (3) showed significant activity against the HT29 cancer cell line with an IC₅₀ value of 1064.05 μM. This article highlights some of the metals that have become important in the development of new coordination complexes and the treatment of cancer. Additionally, for C15, the toxicity was predicted by ADMET analysis and molecular docking.

Synthesis, structural and electrochemical properties of a new family of amino-acid-based coordination complexes

Metalloproteins involved in oxidation-reduction processes in metabolism are fundamental for the wellbeing of every organism. The use of amino-acid-based compounds as ligands for the construction of biomimetic coordination systems represents a promising alternative for the development of new catalysts. Herein is presented a new family of copper, zinc and nickel coordination compounds, which show four-, five- and six- coordination geometries, synthesized using Schiff base ligands obtained from the amino acids L-alanine and L-phenylalanine. Structural analysis and property studies were performed using single-crystal X-ray diffraction data, spectroscopic and electrochemical experiments and DFT calculations. The analysis of the molecular and supramolecular architectures showed that the non-covalent interactions developed in the systems, together with the identity of the metal and the amino acid backbone, are determinants for the formation of the complexes and the stabilization of the resultant geometries. The Cu^II complexes were tested as candidates for the electrochemical conversion reduction of nitrite to NO, finding that the five-coordinate L-phenylalanine complex is the most suitable. Finally, some insights into the rational design of ligands for the construction of biomimetic complexes are suggested.

Heterobimetallic complexes stabilized by the P2N2 macrocyclic ligand system: synthesis and reactivity of a rhodium-copper system that activates molecular hydrogen

The synthesis and reactivity of the bimetallic rhodium-copper complex, Rh(COE)[P₂N₂]Cu, which is stabilized by the P₂N₂ macrocycle, is reported. In the solid state, the rhodium and copper centers are on opposite sides of the macrocyclic ring with the Cu(I) in a linear environment and the Rh(I) in a square planar array. However, in solution a very symmetrical structure is suggested on the basis of the ¹H NMR data, which is consistent with at least two separate fluxional processes, rotation of the cyclooctene unit and movement of the Rh(I) unit between the two amido donors. Addition of H₂ to Rh(COE)[P₂N₂]Cu results in the formation of ([P₂N₂H]RhH(μ-H)₂Cu)₂via hydrogenation of the coordinated cyclooctene unit, oxidative addition of H₂ to the rhodium center and hydrogenolysis of the copper amido unit. Monitoring the reaction of H₂ by NMR spectroscopy indicated the formation of a number of intermediates which suggests hydrogenolysis of the copper amido linkage occurs to generate CuH in some form, along with Rh(COE)[P₂N₂H], which is converted to Rh(H)₂[P₂N₂H] by hydrogenation of the cyclooctene, which then recombines with the CuH present to generate the final product. Deuteration studies indicate that there is considerable H/D scrambling in the cyclooctane produced that we attribute to reversible beta-elimination, migratory insertion steps.

Diphosphino-Functionalized 1,8-Naphthyridines: a Multifaceted Ligand Platform for Boranes and Diboranes

A 1,8-naphthyridine diphosphine (NDP) reacts with boron-containing Lewis acids to generate complexes featuring a number of different naphthyridine bonding modes. When exposed to diborane B2 Br4 , NDP underwent self-deprotonation to afford [NDP-B2 Br3 ]Br, an unsymmetrical diborane comprised of four fused rings. The reaction of two equivalents of monoborane BBr3 and NDP in a non-polar solvent provided the simple phosphine-borane adduct [NDP(BBr3 )2 ], which then underwent intramolecular halide abstraction to furnish the salt [NDP-BBr2 ][BBr4 ], featuring a different coordination mode from that of [NDP-B2 Br3 ]Br. Direct deprotonation of NDP by KHMDS or PhCH2 K generates mono- and dipotassium reagents, respectively. The monopotassium reagent reacts with one or half an equivalent of B2 (NMe2 )2 Cl2 to afford NDP-based diboranes with three or four amino substituents.

Dinuclear Silver Complexes in Catalysis

Over the past two decades, there has been a substantial increase in the number of synthetically useful transformations catalyzed by silver. Across the range of silver-catalyzed reactions that have been reported, dinuclear species often emerge as a common feature, either as the (pre-)catalysts themselves or as intermediates during catalysis. This Minireview explores the role of dinuclear silver complexes in homogeneous catalysis, which we hope will aid in the development of improved design principles for silver catalysts.

Dinickel Active Sites Supported by Redox-Active Ligands

Redox reactions that take place in enzymes and on the surfaces of heterogeneous catalysts often require active sites that contain multiple metals. By contrast, there are very few homogeneous catalysts with multinuclear active sites, and the field of organometallic chemistry continues to be dominated by the study of single metal systems. Multinuclear catalysts have the potential to display unique properties owing to their ability to cooperatively engage substrates. Furthermore, direct metal-to-metal covalent bonding can give rise to new electronic configurations that dramatically impact substrate binding and reactivity. In order to effectively capitalize on these features, it is necessary to consider strategies to avoid the dissociation of fragile metal-metal bonds in the course of a catalytic cycle. This Account describes one approach to accomplishing this goal using binucleating redox-active ligands.In 2006, Chirik showed that pyridine-diimines (PDI) have sufficiently low-lying π* levels that they can be redox-noninnocent in low-valent iron complexes. Extending this concept, we investigated a series of dinickel complexes supported by naphthyridine-diimine (NDI) ligands. These complexes can promote a broad range of two-electron redox processes in which the NDI ligand manages electron equivalents while the metals remain in a Ni(I)-Ni(I) state.Using (NDI)Ni₂ catalysts, we have uncovered cases where having two metals in the active site addresses a problem in catalysis that had not been adequately solved using single-metal systems. For example, mononickel complexes are capable of stoichiometrically dimerizing aryl azides to form azoarenes but do not turn over due to strong product inhibition. By contrast, dinickel complexes are effective catalysts for this reaction and avoid this thermodynamic sink by binding to azoarenes in their higher-energy cis form.Dinickel complexes can also activate strong bonds through the cooperative action of both metals. Norbornadiene has a ring-strain energy that is similar to that of cyclopropane but is not prone to undergoing C-C oxidative addition with monometallic complexes. Using an (NDI)Ni₂ complex, norbornadiene undergoes rapid ring opening by the oxidative addition of the vinyl and bridgehead carbons. An inspection of the resulting metallacycle reveals that it is stabilized through a network of secondary Ni-π interactions. This reactivity enabled the development of a catalytic carbonylative rearrangement to form fused bicyclic dienones.These vignettes and others described in this Account highlight some of the implications of metal-metal bonding in promoting a challenging step in a catalytic cycle or adjusting the thermodynamic landscape of key intermediates. Given that our studies have focused nearly exclusively on the (NDI)Ni₂ system, we anticipate that many more such cases are left to be discovered as other transition-metal combinations and ligand classes are explored.

Glossary and tutorial of xenobiotic metabolism terms used during small molecule drug discovery and development (IUPAC Technical Report)

This project originated more than 15 years ago with the intent to produce a glossary of drug metabolism terms having definitions especially applicable for use by practicing medicinal chemists. A first-draft version underwent extensive beta-testing that, fortuitously, engaged international audiences in a wide range of disciplines involved in drug discovery and development. It became clear that the inclusion of information to enhance discussions among this mix of participants would be even more valuable. The present version retains a chemical structure theme while expanding tutorial comments that aim to bridge the various perspectives that may arise during interdisciplinary communications about a given term. This glossary is intended to be educational for early stage researchers, as well as useful for investigators at various levels who participate on today’s highly multidisciplinary, collaborative small molecule drug discovery teams.

An Unsymmetric Imino-Phosphanamidinate Ligand and its Y(III) Complex: Synthesis, Characterization, and Catalytic Hydroboration of Carbonyl Compounds

An imino-phosphanamide ligand, [NHI^iPr2Me2P(Ph)NH-2,6-ⁱPr₂C₆H₃] (LH), containing two different N-substituents was prepared by the direct reaction of the lithium salt of N-heterocyclic imine (NHI) with phenylchloro-2,6-diisopropylphenyl phosphanamine, PhP(Cl)NH-2,6-ⁱPr₂-C₆H₃. Reaction of LH with Y(N(SiMe₃)₂)₃ afforded the heteroleptic complex, [{L}Y(N(SiMe₃)₂)₂] (1), by elimination of HN(SiMe₃)₂. Compound 1 was characterized by multinuclear NMR and X-ray crystallography. In the complex, the Y(III) center was found to be tetracoordinate in a distorted tetrahedral geometry. The ligand, imino-phosphanamidinate, [L]^-, functions in a chelating manner, and its coordination to Y(III) results in a distorted 4-membered YPN₂ ring. As a proof of principle of its activity, 1 was used as a precatalyst for the hydroboration of various aldehydes and ketones using HBpin as the hydrogen source. The hydroboration reaction was rapid and clean even with low catalyst loadings (0.01-0.1 mol %). In addition, a very good functional group tolerance was observed in these reactions.

Pyridyldiimine macrocyclic ligands: Influences of template ion, linker length and imine substitution on ligand synthesis, structure and redox properties

A series of 2,6-diiminopyridine-derived macrocyclic ligands have been synthesized via [2+2] condensation around alkaline earth metal triflate salts. The inclusion of a tert-butyl group at the 4-position of the pyridine ring of the macrocyclic synthons results in macrocyclic complexes that are soluble in common organic solvents, thereby enabling a systematic comparison of the physical properties of the complexes by NMR spectroscopy, mass spectrometry, solution-phase UV-Vis spectroscopy, cyclic voltammetry and single-crystal X-ray crystallography. Solid-state structures determined crystallographically demonstrate increased twisting in the ligand, concurrent with either a decrease in ion size or an increase in macrocycle ring size (18, 20, or 22 membered rings). The degree of folding and twisting within the macrocycle can be quantified using parameters derived from the N_pyr-M-N_pyr bond angle and the relative orientation of the pyridinediimine (PDI) and pyridinedialdimine (PDAI) fragments to each other within the solid state structures. Cyclic voltammetry and UV-Vis spectroscopy were used to compare the relative energies of the imine π* orbital of the redox active PDI and PDAI components in the macrocycle when coordinated to redox inactive metals. Both methods indicate the change from a methyl to hydrogen substitution on the imine carbon lowers the energy of the ligand π* system.

Ortho-vanillin derived Al(iii) and Co(iii) catalyst systems for switchable catalysis using ε-decalactone, phthalic anhydride and cyclohexene oxide

Switchable catalysis is a useful one-pot method to prepare block polyesters utilising a single catalyst exposed to a mixture of monomers.

Pyridazine as a privileged structure: An updated review on anticancer activity of pyridazine containing bioactive molecules

Identification of potent anticancer agents with high selectivity and low toxicity remains on the way to human health. Pyridazine featuring advantageous physicochemical properties and antitumor potential usually is regarded as a central core in numerous anticancer derivatives. There are several approved pyridazine-based drugs in the market and analogues currently going through different clinical phases or registration statuses, suggesting pyridazine as a promising drug-like scaffold. The current review is intended to provide a comprehensive and updated overview of pyridazine derivatives as potential anticancer agents. In particular, we focused on their structure-activity relationship (SAR) studies, design strategies, binding modes and biological activities in the hope of offering novel insights for further rational design of more active and less toxic anticancer drugs.

Bimetallics in a Nutshell: Complexes Supported by Chelating Naphthyridine-Based Ligands

Bimetallic motifs are a structural feature common to some of the most effective and synthetically useful catalysts known, including in the active sites of many metalloenzymes and on the surfaces of industrially relevant heterogeneous materials. However, the complexity of these systems often hampers detailed studies of their fundamental properties. To glean valuable mechanistic insight into how these catalysts function, this research group has prepared a family of dinucleating 1,8-naphthyridine ligands that bind two first-row transition metals in close proximity, originally designed to help mimic the proposed active site of metal oxide surfaces. Of the various bimetallic combinations examined, dicopper(I) is particularly versatile, as neutral bridging ligands adopt a variety of different binding modes depending on the configuration of frontier orbitals available to interact with the Cu centers. Organodicopper complexes are readily accessible, either through the traditional route of salt metathesis or via the activation of tetraarylborate anions through aryl group abstraction by a dicopper(I) unit. The resulting bridging aryl complexes engage in C-H bond activations, notably with terminal alkynes to afford bridging alkynyl species. The μ-hydrocarbyl complexes are surprisingly tolerant of water and elevated temperatures. This stability was leveraged to isolate a species that typically represents a fleeting intermediate in Cu-catalyzed azide-alkyne coupling (CuAAC); reaction of a bridging alkynyl complex with an organic azide afforded the first example of a well-defined, symmetrically bridged dicopper triazolide. This complex was shown to be an intermediate during CuAAC, providing support for a proposed bimetallic mechanism. These platforms are not limited to formally low oxidation states; chemical oxidation of the hydrocarbyl complexes cleanly results in formation of mixed valence Cu^ICu^II complexes with varying degrees of distortion in both the bridging moiety and the dicopper core. Higher oxidation states, e.g., dicopper(II), are easily accessed via oxidation of a dicopper(I) compound with air to give a Cu^II₂(μ-OH)₂ complex. Reduction of this compound with silanes resulted in the unexpected formation of pentametallic copper(I) dihydride clusters or trimetallic monohydride complexes, depending on the nature of the silane. Finally, development of an unsymmetrical naphthyridine ligand with mixed donor side-arms enables selective synthesis of an isostructural series of six heterobimetallic complexes, demonstrating the power of ligand design in the preparation of heterometallic assemblies.

Trianionic binucleating bis(trityl)/aryloxide ligands and their lithium, magnesium, and zinc complexes

A series of lithium complexes with trianionic bis(trityl)/aryloxide ligands were prepared by triple deprotonation of phenols with two ortho-diarylmethyl substituents. Transmetalation with one of the lithium complexes via salt metathesis resulted in the synthesis of corresponding Mg and Zn complexes, which showed distinct coordination stoichiometry and structures. The metal complexes were characterized by multi-nuclear NMR, UV–vis, and infrared spectroscopy. Additionally, the redox property of a trilithium compound was investigated by electrochemical methods. X-ray crystallography revealed that the new bis(trityl)/aryloxide ligands could simultaneously bind to two nearby metal centers both in chelating κ2-O,C fashion, making themselves rare examples of tridentate binucleating alkyl/aryloxo scaffolds.

Metal-metal cooperative bond activation by heterobimetallic alkyl, aryl, and acetylide PtII/CuI complexes

We report the selective formation of heterobimetallic Pt^II/Cu^I complexes that demonstrate how facile bond activation processes can be achieved by altering the reactivity of common organoplatinum compounds through their interaction with another metal center. The interaction of the Cu center with the Pt center and with a Pt-bound alkyl group increases the stability of PtMe₂ towards undesired rollover cyclometalation. The presence of the Cu^I center also enables facile transmetalation from an electron-deficient tetraarylborate [B(Ar^F)₄]⁻ anion and mild C–H bond cleavage of a terminal alkyne, which was not observed in the absence of an electrophilic Cu center. The DFT study indicates that the Cu center acts as a binding site for the alkyne substrate, while activating its terminal C–H bond.

The selective formation of heterobimetallic Pt^II/Cu^I complexes demonstrates how facile bond activation processes can be achieved by altering the reactivity of common organoplatinum compounds through their interaction with another metal center.

Oxidative C-N bond cleavage of (2-pyridylmethyl)amine-based tetradentate supporting ligands in ternary cobalt(ii)-carboxylate complexes

Three mononuclear cobalt(ii)-carboxylate complexes, [(TPA)Co^II(benzilate)]⁺ (1), [(TPA)Co^II(benzoate)]⁺ (2) and [(iso-BPMEN)Co^II(benzoate)]⁺ (3), of N4 ligands (TPA = tris(2-pyridylmethyl)amine and iso-BPMEN = N¹,N¹-dimethyl-N²,N²-bis((pyridin-2-yl)methyl)ethane-1,2-diamine) were isolated to investigate their reactivity toward dioxygen. Monodentate (η¹) binding of the carboxylates to the metal centre favours the five-coordinate cobalt(ii) complexes (1-3) for dioxygen activation. Complex 1 slowly reacts with dioxygen to enable the oxidative decarboxylation of the coordinated α-hydroxy acid (benzilate). Prolonged exposure of the reaction solution of 2 to dioxygen results in the formation of [(DPA)Co^III(picolinate)(benzoate)]⁺ (4) and [Co^III(BPCA)₂]⁺ (5) (DPA = di(2-picolyl)amine and HBPCA = bis(2-pyridylcarbonyl)amide), whereas only [(DPEA)Co^III(picolinate)(benzoate)]⁺ (6) (DPEA = N¹,N¹-dimethyl-N²-(pyridine-2-ylmethyl)-ethane-1,2-diamine) is isolated from the final oxidised solution of 3. The modified ligand DPA (or DPEA) is formed via the oxidative C-N bond cleavage of the supporting ligands. Further oxidation of the -CH₂- moiety to -C([double bond, length as m-dash]O)- takes place in the transformation of DPA to HBPCA on the cobalt(ii) centre. Labelling experiments with ¹⁸O₂ confirm the incorporation of oxygen atoms from molecular oxygen into the oxidised products. Mixed labelling studies with ¹⁶O₂ and H₂O¹⁸ strongly support the involvement of water in the C-N bond cleavage pathway. A comparison of the dioxygen reactivity of the cobalt complexes (1-3) with those of several other five-coordinate mononuclear complexes [(TPA)Co^II(X)]^+/2+ (X = Cl, CH₃CN, acetate, benzoylformate, salicylate and phenylpyruvate) establishes the role of the carboxylate co-ligands in the activation of dioxygen and subsequent oxidative cleavage of the supporting ligands by a metal-oxygen oxidant.

Discrete and polymeric ensembles based on dinuclear molybdenum(vi) building blocks with adaptive carbohydrazide ligands: from the design to catalytic epoxidation

Discrete and polymeric ensembles based on dimolybdenum(vi) units with adaptive carbohydrazide ligands are described. The polymeric complexes are efficient catalysts for cyclooctene epoxidation under eco-friendly conditions.