Development of the Chemistry of Indium in Formal Oxidation States Lower than +3†

Cationic Group 13 and 14 Element Clusters

Anionic and neutral clusters dominate the cluster chemistry of group 13 and 14 elements, many of which have become classic textbook examples of main group element clusters. However, facilitated by the development of unreactive, weakly coordinating anions, the number of known group 13 and 14 cationic cluster compounds has risen rapidly in recent years. Hence, this review aims to give an overview over this research field, which arouses increasing interest owing to the often unusual structures of the cationic clusters, as well as their application in bond activation chemistry. Challenges of the cluster formation are discussed and suitable starting materials are presented, as well as syntheses, structures and the rich follow-up chemistry of (also mixed) group 13 and 14 cluster cations.

Facile methyl group transfer from PtII to gallium and indium

Facile transmetalation is observed from a d8 metal, platinum(II), to indium and gallium leading to the extrusion of methylated gallate and indate anions representing a rare case of the "reverse" transmetalation from a d8 metal to a main group metal. The Pt-Ga and Pt-In bonding in the bimetallic complexes was analyzed through bosonic and fermionic potentials, QTAIM, and NBO.

One-Step Transformation of Aryl Diazonium Salts into Aryl Indium(III) Reagents

A method for the conversion of diazonium salts into intrinsically nucleophilic aryl indium reagents is described. The reaction is performed using indium(I) bromide with the C-In bond being formed by the interaction of aryl radicals with the indium salt. The obtained aryl indium(III) reagents work well in the Liebeskind-Srogl cross-coupling with thioesters, affording a wide variety of aryl ketones. This two-step transformation is a general method for the acylation of diazonium salts.

Indium-Mediated Reformatsky Reaction of Iododifluoro Ketones with Aldehydes: Preparation of α,α-Difluoro-β-hydroxyketone Derivatives in Water

Indium can efficiently mediate the Reformatsky reaction of iododifluoroacetylketones with aldehydes to afford the corresponding α,α-difluoro-β-hydroxyketones in high yield in pure water This reaction has excellent substrate suitability and functional group selectivity and provides an efficient approach for the synthesis of bioactive molecules containing the α,α-difluoro-β-hydroxyketone pharmacophore.

Indium(II) Chloride as a Precursor in the Synthesis of Ternary (Ag-In-S) and Quaternary (Ag-In-Zn-S) Nanocrystals

A new indium precursor, namely, indium(II) chloride, was tested as a precursor in the synthesis of ternary Ag-In-S and quaternary Ag-In-Zn-S nanocrystals. This new precursor, being in fact a dimer of Cl2In-InCl2 chemical structure, is significantly more reactive than InCl3, typically used in the preparation of these types of nanocrystals. This was evidenced by carrying out comparative syntheses under the same reaction conditions using these two indium precursors in combination with the same silver (AgNO3) and zinc (zinc stearate) precursors. In particular, the use of indium(II) chloride in combination with low concentrations of the zinc precursor yielded spherical-shaped (D = 3.7-6.2 nm) Ag-In-Zn-S nanocrystals, whereas for higher concentrations of this precursor, rodlike nanoparticles (L = 9-10 nm) were obtained. In all cases, the resulting nanocrystals were enriched in indium (In/Ag = 1.5-10.3). Enhanced indium precursor conversion and formation of anisotropic, longitudinal nanoparticles were closely related to the presence of thiocarboxylic acid type of ligands in the reaction mixture. These ligands were generated in situ and subsequently bound to surfacial In(III) cations in the growing nanocrystals. The use of the new precursor of enhanced reactivity facilitated precise tuning of the photoluminescence color of the resulting nanocrystals in the spectral range from ca. 730 to 530 nm with photoluminescence quantum yield (PLQY) varying from 20 to 40%. The fabricated Ag-In-S and Ag-In-Zn-S nanocrystals exhibited the longest, reported to date, photoluminescence lifetimes of ∼9.4 and ∼1.4 μs, respectively. It was also demonstrated for the first time that ternary (Ag-In-S) and quaternary (Ag-In-Zn-S) nanocrystals could be applied as efficient photocatalysts, active under visible light (green) illumination, in the reaction of aldehydes reduction to alcohols.

Cationic aluminum, gallium, and indium complexes in catalysis

The introduction of cationic charge allows cationic group 13 complexes to be excellent Lewis acid catalysts. Cationic aluminum, gallium, and indium complexes in catalysis are comprehensively reviewed based on the reaction type.

Synthesis of a series of novel In(III) 2,6-diacetylpyridine bis(thiosemicarbazide) complexes: structure, anticancer function and mechanism

The anticancer function and anticancer mechanism of indium (In) complexes still remain mysterious to date. Furthermore, it is greatly challenging to design a multi-functional metal agent that not only kills cancer cells but also inhibits their invasion and metastasis. Thus, to develop novel next-generation anticancer metal agents, we designed and synthesized a series of novel In(iii) 2,6-diacetylpyridine bis(thiosemicarbazide) complexes (C1-C4) for the first time and then investigated their structure-activity relationships with human urinary bladder cancer (T-24) cells. In particular, C4 not only showed higher cytotoxicity to cancer cells and less toxicity toward normal cells relative to cisplatin but also inhibited cell invasion and metastasis of T-24 cells. Interestingly, C4 acted against T-24 cells exhibiting multiple mechanisms: (1) arresting the S-phase of cell cycle via regulation of cytokine kinases, (2) activating the mitochondrial-mediated apoptosis, endoplasmic reticulum-stress-mediated cell death, PERK and c-Jun N-terminal kinase 1 (JNK) cell signaling pathways, and (3) inhibiting the expression of telomerase via the regulation of c-myc and h-TERT proteins. Our results suggested that C4 may be developed as a potential multi-functional and multi-targeting anticancer candidate.

On the Superior Activity of In(I) versus In(III) Cations Toward ortho-C-Alkylation of Anilines and Intramolecular Hydroamination of Alkenes

An efficient ortho-C-alkylation of unprotected anilines with a variety of styrenes and alkenes using a univalent cationic indium(I) catalyst is reported. Mechanistic studies revealed that the reaction likely proceeds via a tandem hydroamination/Hofmann-Martius rearrangement. The high compatibility between the cationic indium(I) complex and primary anilines led us to develop an In(I)⁺-catalyzed hydroamination of alkenes using unprotected primary and secondary alkenylamines. Computations support the catalytic activity of naked In(I)⁺ ions, with an outer sphere mechanism for the C-N bond formation and a potentially inner sphere protodemetallation.

Applications of electron paramagnetic resonance spectroscopy to heavy main-group radicals

The exploration of heavy main-group radicals is rapidly expanding, for which electron paramagnetic resonance (EPR) spectroscopic characterisation plays a key role. EPR spectroscopy has the capacity to deliver information of the radical's electronic, geometric and bonding structure. Herein, foundations of electron-nuclear hyperfine analysis are detailed before reviewing more recent applications of EPR spectroscopy to As, Sb, and Bi centred radicals. Additional diverse examples of the application of EPR spectroscopy to other heavy main group radicals are highlighted.

Sub-nanocatalysis for Efficient Aqueous Nitrate Reduction: Effect of Strong Metal-Support Interaction

Magnetic ferroferric oxide-supported bimetallic Pd-In cluster sub-nanoparticles were used for the first time for the catalytic reduction of nitrates. Due to the unique properties of the FeO_x support, the PdIn active centers could be highly dispersed in both nano- and sub-nanoscales. A variety of characterizations and the charge density difference model confirm that a strong metal-support interaction exists between the active sites and the support. The PdIn nanoparticles on FeO_x show high selectivity toward nitrogen and excellent cyclic activity due to ferromagnetism, which broaden its prospect in practical water treatment. Moreover, the active centers in the sub-nanoscale are used in the nitrate reduction process for the first time and they show a distinct higher activity in denitration. The rate constant for nitrate conversion on PdIn sub-nanoparticles is larger than that for its nanometer counterpart based on the Langmuir-Hinshelwood model. High turnover frequency value and ammonia selectivity are achieved for the small-sized sub-nanocatalyst. The FeO_x-supported PdIn nanoparticles and sub-nanoparticles have two application areas in water purification and ammonia recovery, respectively. Density functional theory calculations on the adsorption energies of elemental reactions are also performed, which shed some light on the catalysis mechanism and catalyst design.

Experimental and theoretical study of multinuclear indium–oxo clusters in CHA zeolite for CH4 activation at room temperature

The local structure of CHA-zeolite supported indium–oxo clusters and CH₄ activation at room temperature were experimentally and theoretically studied.

Acyclic Remote 1,5- and 1,4,5-Stereocontrol in the Catalytic Stereoselective Reactions of β-Lactams with Aldehydes: The Effect of the N-Methylimidazole Ligand

The application of the N-methylimidazole ( N-MI) ligand in the Pd(0)/InI-promoted allylations of aldehydes with β-lactam-derived organoindiums enables the reaction of azetidin-2-ones with diversely substituted allyl moieties, inert under previously reported conditions. As a result, allylations and crotylations of a variety of aromatic and aliphatic aldehydes with previously unavailable chiral ε-amido-allylindiums bearing α-, β-, or γ-substituted allyl fragments were developed. The reactions occur under thermodynamic control with a highly efficient remote 1,5- or 1,4,5-stereocontrol to afford a diversity of (3 Z)-2,5- anti-2,6- syn- or (3 Z)-2,5- syn-2,6- anti-substituted enediols, aminoalcohols, and homoallylic alcohols in moderate to high yields and with an excellent diastereoselectivity. A detailed study on the effect of the β-lactam and aldehyde structures and chirality on the yield and stereochemistry in the products was carried out.

En Route to Bis-Carbene Analogues of the Heavier Group 13 Elements: Consideration of Bridging Group and Metal(I) Source

With the aim of exploring the effect of steric constraints imposed on the metal-metal interaction of bis-carbene analogues of thallium by the linking scaffold, seven dinuclear thallium diyls with a series of rigid, semirigid, and flexible bridging scaffolds were synthesized. The solid-state molecular structures were determined for four of these compounds by single-crystal XRD and compared with the results of DFT calculations, which were performed for all substances. These compounds serve as models to investigate the metal-metal distance in the absence of co-coordinated molecules (additional ligands, solvent molecules). In addition, the effect of the metal(I) precursor, and more specifically the counterion, on the synthetic access to bis-carbene analogues of indium and thallium was investigated. For indium, only InI yields the desired dinuclear indium diyl. With InBr no reaction was observed, and using InCl gave rise to a mononuclear indium(III) compound. For thallium, both TlI and TlBr allow access to the related bis-carbene analogue, although the yield with the latter is significantly lower. In contrast, no reactions were observed with TlCl and TlBF₄ .

Indium(iii) as π-acid catalyst for the electrophilic activation of carbon–carbon unsaturated systems

This review focuses on indium(iii) as a π-acid for the activation of C–C unsaturated systems (alkynes, alkenes, and allenes) in organic synthesis.

Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation

Hybrid organic-inorganic halide perovskites with the prototype material of CH₃NH₃PbI₃ have recently attracted intense interest as low-cost and high-performance photovoltaic absorbers. Despite the high power conversion efficiency exceeding 20% achieved by their solar cells, two key issues-the poor device stabilities associated with their intrinsic material instability and the toxicity due to water-soluble Pb²⁺-need to be resolved before large-scale commercialization. Here, we address these issues by exploiting the strategy of cation-transmutation to design stable inorganic Pb-free halide perovskites for solar cells. The idea is to convert two divalent Pb²⁺ ions into one monovalent M⁺ and one trivalent M³⁺ ions, forming a rich class of quaternary halides in double-perovskite structure. We find through first-principles calculations this class of materials have good phase stability against decomposition and wide-range tunable optoelectronic properties. With photovoltaic-functionality-directed materials screening, we identify 11 optimal materials with intrinsic thermodynamic stability, suitable band gaps, small carrier effective masses, and low excitons binding energies as promising candidates to replace Pb-based photovoltaic absorbers in perovskite solar cells. The chemical trends of phase stabilities and electronic properties are also established for this class of materials, offering useful guidance for the development of perovskite solar cells fabricated with them.

Synthesis and formation mechanisms of morphology-controllable indium-containing precursors and optical properties of the derived In2O3 particles

Indium-containing precursors with three morphologies were synthesized, and the formation mechanisms were analyzed.

Polyether complexes of groups 13 and 14

Notable aspects of the chemistry of polyether complexes of group 13 and 14 elements are reviewed.

Cationic cluster formation versus disproportionation of low-valent indium and gallium complexes of 2,2'-bipyridine

Group 13 M^I compounds often disproportionate into M⁰ and M^III. Here, however, we show that the reaction of the M^I salt of the weakly coordinating alkoxyaluminate [Ga^I(C₆H₅F)₂]⁺[Al(OR^F)₄]⁻ (R^F=C(CF₃)₃) with 2,2'-bipyridine (bipy) yields the paramagnetic and distorted octahedral [Ga(bipy)₃]^2+•{[Al(OR^F)₄]⁻}₂ complex salt. While the latter appears to be a Ga^II compound, both, EPR and DFT investigations assign a ligand-centred [Ga^III{(bipy)₃}^•]²⁺ radical dication. Surprisingly, the application of the heavier homologue [^In^I(C₆H₅F)₂]⁺[Al(OR^F)₄]⁻ leads to aggregation and formation of the homonuclear cationic triangular and rhombic [In₃(bipy)₆]³⁺, [In₃(bipy)₅]³⁺ and [In₄(bipy)₆]⁴⁺ metal atom clusters. Typically, such clusters are formed under strongly reductive conditions. Analysing the unexpected redox-neutral cationic cluster formation, DFT studies suggest a stepwise formation of the clusters, possibly via their triplet state and further investigations attribute the overall driving force of the reactions to the strong In−In bonds and the high lattice enthalpies of the resultant ligand stabilized [M₃]³⁺{[Al(OR^F)₄]⁻}₃ and [M₄]⁴⁺{[Al(OR^F)₄]⁻}₄ salts.

Group 13 metals such as gallium and indium with oxidation states of +I tend to disproportionate into more stable 0 and +III states. Here, the authors report that with a 2,2'-bipyridine ligand Ga(+I) forms a paramagnetic mononuclear Ga(+III) complex, whereas the indium analogue aggregates forming cationic clusters retaining the +I state.

Te–Te and Te–C bond cleavage reactions using a monovalent gallanediyl

Te–Te and Te–C bond cleavage occurs in reactions of monovalent LGa (L = [(2,6-i-Pr₂-C₆H₃)NC(Me)]₂CH) with Te, Ph₂Te₂ and i-Pr₂Te. (LGa-μ-Te)₂1, LGa(TePh)₂2 and LGa(i-Pr)Tei-Pr 3 were characterized by heteronuclear NMR (¹H, ¹³C, ¹²⁵Te) and IR spectroscopy and by single crystal X-ray analyses.

Exploring the potential energy surface of E₂P₄ clusters (E=Group 13 element): the quest for inverse carbon-free sandwiches

Inverse carbon-free sandwich structures with formula E2P4 (E=Al, Ga, In, Tl) have been proposed as a promising new target in main-group chemistry. Our computational exploration of their corresponding potential-energy surfaces at the S12h/TZ2P level shows that indeed stable carbon-free inverse-sandwiches can be obtained if one chooses an appropriate Group 13 element for E. The boron analogue B2P4 does not form the D(4h)-symmetric inverse-sandwich structure, but instead prefers a D(2d) structure of two perpendicular BP2 units with the formation of a double B-B bond. For the other elements of Group 13, Al-Tl, the most favorable isomer is the D(4h) inverse-sandwich structure. The preference for the D(2d) isomer for B2P4 and D(4h) for their heavier analogues has been rationalized in terms of an isomerization-energy decomposition analysis, and further corroborated by determination of aromaticity of these species.

The new world of organic reactions in water

Different reactivities and selectivities are observed in water compared with those in organic solvents. In this article, such three examples are described. While ammonia was known not to react in metal-catalyzed allylic amination, palladium-catalyzed allylic amination using aqueous ammonia proceeded to afford primary amines in high yields. Second, allylboronates reacted with aldehydes in aqueous media to afford α-addition adducts exclusively in high yields with high diastereo- and enantioselectivities using Zn(OH)2with ligands as catalysts. Finally, it was found that catalytic use of In(0) was effective for the reactions of allylboronates with ketones in water.

Boron-based pronucleophiles in catalytic (asymmetric) C(sp3)–allyl cross-couplings

Allylic and allenyl boronates or boranes were uncovered as suitable pronucleophiles in catalytic C–C bond formations with C(sp3) electrophiles such as O,O-acetals and N,O-aminals or ethers and carbohydrates. These transformations were most efficiently catalyzed by In(I) triflate. Importantly, chiral counteranion-directed, catalytic asymmetric allylation and allenylation of N,O-aminals was developed by employing a catalyst system composed of In(I) chloride and a chiral silver 2,2'-dihydroxy-1,1'-binaphthalene (BINOL)-phosphate.

Low-oxidation state indium-catalyzed C-C bond formation

The development of innovative metal catalysis for selective bond formation is an important task in organic chemistry. The group 13 metal indium is appealing for catalysis because indium-based reagents are minimally toxic, selective, and tolerant toward various functional groups. Among elements in this group, the most stable oxidation state is typically +3, but in molecules with larger group 13 atoms, the chemistry of the +1 oxidation state is also important. The use of indium(III) compounds in organic synthesis has been well-established as Lewis acid catalysts including asymmetric versions thereof. In contrast, only sporadic examples of the use of indium(I) as a stoichiometric reagent have been reported: to the best of our knowledge, our investigations represent the first synthetic method that uses a catalytic amount of indium(I). Depending on the nature of the ligand or the counteranion to which it is coordinated, indium(I) can act as both a Lewis acid and a Lewis base because it has both vacant p orbitals and a lone pair of electrons. This potential ambiphilicity may offer unique reactivity and unusual selectivity in synthesis and may have significant implications for catalysis, particularly for dual catalytic processes. We envisioned that indium(I) could be employed as a metallic Lewis base catalyst to activate Lewis acidic boron-based pronucleophiles for selective bond formation with suitable electrophiles. Alternatively, indium(I) could serve as an ambiphilic catalyst that activates both reagents at a single center. In this Account, we describe the development of low-oxidation state indium catalysts for carbon-carbon bond formation between boron-based pronucleophiles and various electrophiles. We discovered that indium(I) iodide was an excellent catalyst for α-selective allylations of C(sp(2)) electrophiles such as ketones and hydrazones. Using a combination of this low-oxidation state indium compound and a chiral semicorrin ligand, we developed catalytic highly enantioselective allylation, crotylation, and α-chloroallylation reactions of hydrazones. These transformations proceeded with rare constitutional selectivities and remarkable diastereoselectivities. Furthermore, indium(I) triflate served as the most effective catalyst for allylations and propargylations of C(sp(3)) electrophiles such as O,O-acetals, N,O-aminals, and ethers, and we applied this methodology to carbohydrate chemistry. In addition, a catalyst system composed of indium(I) chloride and a chiral silver BINOL-phosphate facilitated the highly enantioselective allylation and allenylation of N,O-aminals. Overall, these discoveries demonstrate the versatility, efficiency, and sensitivity of low-oxidation state indium catalysts in organic synthesis.