Engineering biomaterials for synthetic neural stem cell microenvironments

Hydrogel-based microenvironment engineering of haematopoietic stem cells

Haematopoietic Stem cells (HSCs) have the potential for self-renewal and multilineage differentiation, and their behaviours are finely tuned by the microenvironment. HSC transplantation (HSCT) is widely used in the treatment of haematologic malignancies while limited by the quantity of available HSCs. With the development of tissue engineering, hydrogels have been deployed to mimic the HSC microenvironment in vitro. Engineered hydrogels influence HSC behaviour by regulating mechanical strength, extracellular matrix microstructure, cellular ligands and cytokines, cell-cell interaction, and oxygen concentration, which ultimately facilitate the acquisition of sufficient HSCs. Here, we review recent advances in the application of hydrogel-based microenvironment engineering of HSCs, and provide future perspectives on challenges in basic research and clinical practice.

Reviving matrix for nerve reconstruction in rat model of acute and chronic complete spinal cord injury

This study aimed to investigate the innovative antigliotic guiding regenerative gel (AGRG) as reviving matrix for reconnection of spinal cord defect in rat models of complete acute and chronic spinal cord injury (SCI). In acute SCI, a 2 mm segment of the spinal cord (SC) was removed at Th7-Th8. Then AGRG was injected to the gap or left untreated. In chronic SCI, a 1 mm segment of the spinal cord (SC) was removed at Th7-Th8. One month later, the injured area was cleaned from connective and scar tissue, creating a gap of 2-3 mm. Then, AGRG was injected to the gap or left untreated. Functional, electrophysiological, histological and immunohistochemical assessments were performed. In acute SCI, at week 24, 75% of AGRG group showed a somatosensory evoked potential (SEP) signal. Appearance of myelin basic protein (MBP) was observed in the injured area in the AGRG group (p < 0.1), compared to the untreated group. In chronic SCI, 24 weeks after 2^nd surgery, appearance of MBP, indicating presence of myelinated axons, was observed in AGRG group, compared to the untreated group (p < 0.01). These preliminary results suggest that AGRG can serve as a vital bridging station inducing regeneration of injured SC in acute and chronic cases of paraplegia.

Strategies for effective neural circuit reconstruction after spinal cord injury: use of stem cells and biomaterials

Spinal cord injury (SCI), a serious disease of the central nervous system, often with irreversible loss of motor or sensory functions. Failure of axon connection and inhibition of microenvironment after SCI severely hinder the regeneration of damaged tissue and neuron function. Therefore, the new perspective of treatment of spinal cord injury is the reconstruction of neural circuit. Stem cells are a kind of cells with differentiation potential. They reconstruct local circulation by differentiating into neurons to replace damaged cells. It can also secrete various factors to regulate the host microenvironment and play a therapeutic role. Biomaterials can fill the cavity at the site of spinal cord injury, load therapeutic drugs, provide adsorption sites for transplanted cells and play a bridging role. In this review, the therapeutic role of stem cells and biomaterials is discussed, together with their properties, advantages, limitations, and future perspectives, providing a reference for basic and clinical research on SCI treatment.

Poly (L-lactic acid) nanofibrous scaffolds support the proliferation and neural differentiation of mouse neural stem and progenitor cells

BACKGROUND

The distribution and growth of cells on nanofibrous scaffolds seem to be an indispensable precondition in cell tissue engineering. The potential use of biomaterial scaffolds in neural stem cell therapy is increasingly attracting attention.

AIM

In this study, we produced porous nanofibrous scaffolds fabricated from random poly-L-lactic acid (PLLA) to support neurogenic differentiation of neural stem and progenitor cells (NSPCs), isolated from the subventricular zone (SVZ) of the adult mouse brain.

METHODS

The viability and proliferation of the NSPCs on the nanofibrous PLLA scaffold were also tested by nuclear staining with 4, 6-diamidino-2-phenylindole dihydrochloride (DAPI), 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay and scanning electron microscopy (SEM). To investigate the differentiation potential of NSPCs on the scaffolds, the cells were treated with a neurogenic differentiation medium, and immunostaining was done to detect neuronal and glial cells after 14 and 21 days of cultivation. Furthermore, the morphology of differentiated cells on the scaffold was examined using SEM.

RESULTS

The DAPI staining revealed the proliferation of NSPCs onto the surface of the nanofibrous PLLA scaffold. DAPI-positive cells were counted on days 2 and 5 after cultivation. The mean number of cells in each microscopic field was significantly (p < .05) increased (51 ± 19 on day 2 compared to 77 ± 25 cells on day 5). The results showed that the cell viability on PLLA scaffolds significantly increased compared to control groups. Moreover, cell viability was significantly increased 5 days after culturing (262.3 ± 50.2) as compared to 2 days culture in Vitro (174.2 ± 28.3, p < .05). Scanning electron micrographs also showed that the NSPCs adhered and differentiated on PLLA scaffolds. We found that the neural cell markers, microtubule-associated protein 2 (MAP2) and glial fibrillary acidic protein (GFAP), were expressed in NSPCs seeded on random PLLA scaffolds after 21 days of cultivation.

CONCLUSION

These results suggest that the PLLA nano-scaffolds, due to their biocompatible property, are an appropriate structure for the proliferation, differentiation, and normal growth of NSPCs.

Growth and Spatial Control of Murine Neural Stem Cells on Reflectin Films

Stem cells have attracted significant attention due to their regenerative capabilities and their potential for the treatment of disease. Consequently, significant research effort has focused on the development of protein- and polypeptide-based materials as stem cell substrates and scaffolds. Here, we explore the ability of reflectin, a cephalopod structural protein, to support the growth of murine neural stem/progenitor cells (mNSPCs). We observe that the binding, growth, and differentiation of mNSPCs on reflectin films is comparable to that on more established protein-based materials. Moreover, we find that heparin selectively inhibits the adhesion of mNSPCs on reflectin, affording spatial control of cell growth and leading to a >30-fold change in cell density on patterned substrates. The described findings highlight the potential utility of reflectin as a stem cell culture material.

Spontaneous Differentiation of Human Neural Stem Cells on Nanodiamonds

The potential use of stem cells in regenerative medicine requires the ability to be able to control stem cell fate as cellular networks are developed. Here, nanodiamonds (≈10 nm) are supported on glass and shown to be an excellent host for the attachment and proliferation of human neural stem cells. Moreover, it is shown that spontaneous differentiation into neurons occurs on nanodiamonds. The use of variously oxygen terminated and hydrogen terminated nanodiamonds has been explored. It is shown that O-ND monolayers promote the differentiation of human neural stem cells into neurons with increased total neurite length, degree of branching, and density of neurites when compared with H-NDs or the glass control. The total number of neurites and total neurite length expressing MAP2, a protein enriched in dendrites, is over five times higher for spontaneously differentiated neurones on the O-NDs compared to the control. The fact that inexpensive nanodiamonds can be attached through simple sonication from water on 2D and 3D shapes indicates significant promise for their potential as biomaterials in which neuro-regenerative diseases can be studied.

Cellulose exopolysaccharide from sugarcane molasses as a suitable substrate for 2D and 3D neuron and astrocyte primary cultures

Bacteria-synthesized polysaccharides have attracted interest for biomedical applications as promising biomaterials to be used as implants and scaffolds. The present study tested the hypothesis that cellulose exopolysaccharide (CEC) produced from sugarcane molasses of low cost and adequate purity would be suitable as a template for 2D and 3D neuron and/or astrocyte primary cultures, considering its low toxicity. CEC biocompatibility in these primary cultures was evaluated with respect to cell viability, adhesion, growth and cell function (calcium imaging). Polystyrene or Matrigel® matrix were used as comparative controls. We demonstrated that the properties of this CEC in the 2D or 3D configurations are suitable for differentiation of cortical astrocytes and neurons in single or mixed cultures. No toxicity was detected in neurons that showed NMDA-induced Ca²⁺ influx. Unlike other polysaccharides of bacterial synthesis, the CEC was efficient as a support even in the absence of surface conjugation with extracellular matrix proteins, maintaining physiological characteristics of cultured neural cells. These observations open up the perspective for development of a novel 3D biofunctional scaffold produced from bacterial cellulose and obtained from renewable sources whose residues are not pollutants. Its low cost and possibility to be manufactured in scale are also suitable for potential applications in regenerative medicine.

Maintenance of neural progenitor cell stemness in 3D hydrogels requires matrix remodelling

Neural progenitor cell (NPC) culture within three-dimensional (3D) hydrogels is an attractive strategy for expanding a therapeutically relevant number of stem cells. However, relatively little is known about how 3D material properties such as stiffness and degradability affect the maintenance of NPC stemness in the absence of differentiation factors. Over a physiologically relevant range of stiffness from ∼0.5 to 50 kPa, stemness maintenance did not correlate with initial hydrogel stiffness. In contrast, hydrogel degradation was both correlated with, and necessary for, maintenance of NPC stemness. This requirement for degradation was independent of cytoskeletal tension generation and presentation of engineered adhesive ligands, instead relying on matrix remodelling to facilitate cadherin-mediated cell-cell contact and promote β-catenin signalling. In two additional hydrogel systems, permitting NPC-mediated matrix remodelling proved to be a generalizable strategy for stemness maintenance in 3D. Our findings have identified matrix remodelling, in the absence of cytoskeletal tension generation, as a previously unknown strategy to maintain stemness in 3D.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Engineering a Cell Home for Stem Cell Homing and Accommodation

Distilling complexity to advance regenerative medicine from laboratory animals to humans, in situ regeneration will continue to evolve using biomaterial strategies to drive endogenous cells within the human body for therapeutic purposes; this approach avoids the need for delivering ex vivo-expanded cellular materials. Ensuring the recruitment of a significant number of reparative cells from an endogenous source to the site of interest is the first step toward achieving success. Subsequently, making the "cell home" cell-friendly by recapitulating the natural extracellular matrix (ECM) in terms of its chemistry, structure, dynamics, and function, and targeting specific aspects of the native stem cell niche (e.g., cell-ECM and cell-cell interactions) to program and steer the fates of those recruited stem cells play equally crucial roles in yielding a therapeutically regenerative solution. This review addresses the key aspects of material-guided cell homing and the engineering of novel biomaterials with desirable ECM composition, surface topography, biochemistry, and mechanical properties that can present both biochemical and physical cues required for in situ tissue regeneration. This growing body of knowledge will likely become a design basis for the development of regenerative biomaterials for, but not limited to, future in situ tissue engineering and regeneration.

Tyrosine-Selective Functionalization for Bio-Orthogonal Cross-Linking of Engineered Protein Hydrogels

Engineered protein hydrogels have shown promise as artificial extracellular matrix materials for the 3D culture of stem cells due to the ability to decouple hydrogel biochemistry and mechanics. The modular design of these proteins allows for incorporation of various bioactive sequences to regulate cellular behavior. However, the chemistry used to cross-link the proteins into hydrogels can limit what bioactive sequences can be incorporated, in order to prevent nonspecific cross-linking within the bioactive region. Bio-orthogonal cross-linking chemistries may allow for the incorporation of any arbitrary bioactive sequence, but site-selective and scalable incorporation of bio-orthogonal reactive groups such as azides that do not rely on commonly used amine-reactive chemistry is often challenging. In response, we have optimized the reaction of an azide-bearing 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) with engineered elastin-like proteins (ELPs) to selectively azide-functionalize tyrosine residues within the proteins. The PTAD-azide functionalized ELPs cross-link with bicyclononyne (BCN) functionalized ELPs via the strain-promoted azide-alkyne cycloaddition (SPAAC) reaction to form hydrogels. Human mesenchymal stem cells and murine neural progenitor cells encapsulated within these hydrogels remain highly viable and maintain their phenotypes in culture. Tyrosine-specific modification may expand the number of bioactive sequences that can be designed into protein-engineered materials by permitting incorporation of lysine-containing sequences without concern for nonspecific cross-linking.

Functionalized self-assembly polypeptide hydrogel scaffold applied in modulation of neural progenitor cell behavior

Three-dimensional cell culturing provides an appealing biomimetic platform to probe the biological effects of a designed extracellular matrix on the behavior of seeded neural stem or neural progenitor cells. This culturing model serves as an important tool to investigate functional regulators involved in proliferation and differentiation of neural progenitor cells. This study aims to reconstruct a polypeptide hydrogel matrix functionally integrated with cyclo-RGD motif [c(RGDfK)] for initial exploration of neural progenitor cell behavior in three-dimensional culture. Three types of hydrogel scaffolds including Type I collagen, RADA16 self-assembly peptide, and RADA16-c(RGDfK) self-assembly peptide hydrogel were employed to serve as the culturing extracellular matrix of neonatal rat spinal neural progenitor cells. The neural adhesion of functionalized self-assembly peptide hydrogel was acquired prior to its RADA16 counterpart with neural progenitor cell seeding tests. The biophysiological properties of self-assembly peptide hydrogel scaffolds were then detected by scanning electron microscopy and rheology measurements. The biological behavior of embedded neural progenitor cells including cell proliferation and differentiation in three-dimensional niche were analyzed by MTT [(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide)] tests and immunocytochemistry fluorescence staining. The 1% (w/v) RADA16-c(RGDfK) hydrogel scaffold [R16-c(RGDfK)HS] demonstrated an elastic modulus(312 ± 5.7 Pa) compatible with central neural cells, which significantly facilitated the proliferation of embedded neural progenitor cells. Compared to collagen hydrogel, both RADA16 and RADA16-c(RGDfK) hydrogel scaffold improved the cellular proliferation and neuronal differentiation of neural progenitor cells in a three-dimensional culture model. In order to model neuronal regeneration, introduction of neurotrophin-3 in the differentiation environment significantly increased the neuronal differentiation in which the ratio of Tuj-1-positive cell number increased to 72.5% ± 4.7% in the c(RGDfK)-functionalized three-dimensional matrix environment at 7 days in culture. Collectively, the present R16-c(RGDfK)HS displays excellent central neural biocompatibility and emerges as a promising bioengineered extracellular matrix niche of neural stem or progenitor cells, building a solid foundation for the subsequent in vitro and in vivo studies including neural repair, regeneration, and development.

Bio-Orthogonally Crosslinked, Engineered Protein Hydrogels with Tunable Mechanics and Biochemistry for Cell Encapsulation

Covalently-crosslinked hydrogels are commonly used as 3D matrices for cell culture and transplantation. However, the crosslinking chemistries used to prepare these gels generally cross-react with functional groups present on the cell surface, potentially leading to cytotoxicity and other undesired effects. Bio-orthogonal chemistries have been developed that do not react with biologically relevant functional groups, thereby preventing these undesirable side reactions. However, previously developed biomaterials using these chemistries still possess less than ideal properties for cell encapsulation, such as slow gelation kinetics and limited tuning of matrix mechanics and biochemistry. Here, engineered elastin-like proteins (ELPs) are developed that cross-link via strain-promoted azide-alkyne cycloaddition (SPAAC) or Staudinger ligation. The SPAAC-crosslinked materials form gels within seconds and complete gelation within minutes. These hydrogels support the encapsulation and phenotypic maintenance of human mesenchymal stem cells, human umbilical vein endothelial cells, and murine neural progenitor cells. SPAAC-ELP gels exhibit independent tuning of stiffness and cell adhesion, with significantly improved cell viability and spreading observed in materials containing a fibronectin-derived arginine-glycine-aspartic acid (RGD) domain. The crosslinking chemistry used permits further material functionalization, even in the presence of cells and serum. These hydrogels are anticipated to be useful in a wide range of applications, including therapeutic cell delivery and bioprinting.

PNIPAAm-based biohybrid injectable hydrogel for cardiac tissue engineering

Injectable biomaterials offer a non-invasive approach to deliver cells into the myocardial infarct region to maintain a high level of cell retention and viability and initiate the regeneration process. However, previously developed injectable matrices often suffer from low bioactivity or poor mechanical properties. To address this need, we introduced a biohybrid temperature-responsive poly(N-isopropylacrylamide) PNIPAAm-Gelatin-based injectable hydrogel with excellent bioactivity as well as mechanical robustness for cardiac tissue engineering. A unique feature of our work was that we performed extensive in vitro biological analyses to assess the functionalities of cardiomyocytes (CMs) alone and in co-culture with cardiac fibroblasts (CFs) (2:1 ratio) within the hydrogel matrix. The synthesized hydrogel exhibited viscoelastic behavior (storage modulus: 1260 Pa) and necessary water content (75%) to properly accommodate the cardiac cells. The encapsulated cells demonstrated a high level of cell survival (90% for co-culture condition, day 7) and spreading throughout the hydrogel matrix in both culture conditions. A dense network of stained F-actin fibers (∼ 6 × 10(4) μm(2) area coverage, co-culture condition) illustrated the formation of an intact and three dimensional (3D) cell-embedded matrix. Furthermore, immunostaining and gene expression analyses revealed mature phenotypic characteristics of cardiac cells. Notably, the co-culture group exhibited superior structural organization and cell-cell coupling, as well as beating behavior (average ∼ 45 beats per min, co-culture condition, day 7). The outcome of this study is envisioned to open a new avenue for extensive in vitro characterization of injectable matrices embedded with 3D mono- and co-culture of cardiac cells prior to in vivo experiments.

STATEMENT OF SIGNIFICANCE

In this work, we synthesized a new class of biohybrid temperature-responsive poly(N-isopropylacrylamide) PNIPAAm-Gelatin-based injectable hydrogel with suitable bioactivity and mechanical properties for cardiac tissue engineering. A significant aspect of our work was that we performed extensive in vitro biological analyses to assess the functionality of cardiomyocytes alone and in co-culture with cardiac fibroblasts encapsulated within the 3D hydrogel matrix.

Reflectin as a Material for Neural Stem Cell Growth

Cephalopods possess remarkable camouflage capabilities, which are enabled by their complex skin structure and sophisticated nervous system. Such unique characteristics have in turn inspired the design of novel functional materials and devices. Within this context, recent studies have focused on investigating the self-assembly, optical, and electrical properties of reflectin, a protein that plays a key role in cephalopod structural coloration. Herein, we report the discovery that reflectin constitutes an effective material for the growth of human neural stem/progenitor cells. Our findings may hold relevance both for understanding cephalopod embryogenesis and for developing improved protein-based bioelectronic devices.

Mimicking Neural Stem Cell Niche by Biocompatible Substrates

Neural stem cells (NSCs) participate in the maintenance, repair, and regeneration of the central nervous system. During development, the primary NSCs are distributed along the ventricular zone of the neural tube, while, in adults, NSCs are mainly restricted to the subependymal layer of the subventricular zone of the lateral ventricles and the subgranular zone of the dentate gyrus in the hippocampus. The circumscribed areas where the NSCs are located contain the secreted proteins and extracellular matrix components that conform their niche. The interplay among the niche elements and NSCs determines the balance between stemness and differentiation, quiescence, and proliferation. The understanding of niche characteristics and how they regulate NSCs activity is critical to building in vitro models that include the relevant components of the in vivo niche and to developing neuroregenerative approaches that consider the extracellular environment of NSCs. This review aims to examine both the current knowledge on neurogenic niche and how it is being used to develop biocompatible substrates for the in vitro and in vivo mimicking of extracellular NSCs conditions.

Tunable, bioactive protein conjugated hyaluronic acid hydrogel for neural engineering applications

A one-step Michael addition click chemistry reaction is used to fabricate a bioactive conjugated hyaluronic acid (HA) scaffold for neural engineering applications.

Hydrogels and Cell Based Therapies in Spinal Cord Injury Regeneration

Spinal cord injury (SCI) is a central nervous system- (CNS-) related disorder for which there is yet no successful treatment. Within the past several years, cell-based therapies have been explored for SCI repair, including the use of pluripotent human stem cells, and a number of adult-derived stem and mature cells such as mesenchymal stem cells, olfactory ensheathing cells, and Schwann cells. Although promising, cell transplantation is often overturned by the poor cell survival in the treatment of spinal cord injuries. Alternatively, the therapeutic role of different cells has been used in tissue engineering approaches by engrafting cells with biomaterials. The latter have the advantages of physically mimicking the CNS tissue, while promoting a more permissive environment for cell survival, growth, and differentiation. The roles of both cell- and biomaterial-based therapies as single therapeutic approaches for SCI repair will be discussed in this review. Moreover, as the multifactorial inhibitory environment of a SCI suggests that combinatorial approaches would be more effective, the importance of using biomaterials as cell carriers will be herein highlighted, as well as the recent advances and achievements of these promising tools for neural tissue regeneration.

Directional migration and differentiation of neural stem cells within three-dimensional microenvironments

Harnessing neural stem cells to repair neuronal damage is a promising potential treatment for neuronal diseases. To enable future therapeutic efficacy, the survival, proliferation, migration and differentiation of neural stem/progenitor cells (NPCs) should be accurately studied and optimized in in vitro platforms before transplanting these cells into the body for treatment purposes. Such studies can determine the appropriate quantities of the biochemical and biomechanical factors needed to control and optimize NPC behavior in vivo. In this study, NPCs were cultured within a microfluidic device while being encapsulated within the collagen matrix. The migration and differentiation of NPCs were studied in response to varying concentrations of nerve growth factor (NGF) and within varying densities of collagen matrices. It was shown that the migration and differentiation of NPCs can be significantly improved by providing the appropriate range of NGF concentrations while encapsulating the cells within the collagen matrix of optimal density. In particular, it was observed that within collagen matrices of intermediate density (0.9 mg ml(-1)), NPCs have a higher ability to migrate farther and in a collective manner while their differentiation into neurons is significantly higher and the cells can form protrusions and connections with their neighboring cells. Within collagen matrices with higher densities (1.8 mg ml(-1)), the cells did not migrate significantly as compared to the ones within lower matrix densities; within the matrices with lower collagen densities (0.45 mg ml(-1)) most of the cells migrated in an individual manner. However, no significant differentiation into neurons was observed for these two cases. It was also found that depending on the collagen matrix density, a minimum concentration of NGF caused a collective migration of NPCs, and a minimum concentration gradient of this factor stimulated the directional navigation of the cells. The results of this study can be implemented in designing platforms appropriate for regeneration of damaged neuronal systems.

Hybrid elastin-like polypeptide-polyethylene glycol (ELP-PEG) hydrogels with improved transparency and independent control of matrix mechanics and cell ligand density

Hydrogels have been developed as extracellular matrix (ECM) mimics both for therapeutic applications and basic biological studies. In particular, elastin-like polypeptide (ELP) hydrogels, which can be tuned to mimic several biochemical and physical characteristics of native ECM, have been constructed to encapsulate various types of cells to create in vitro mimics of in vivo tissues. However, ELP hydrogels become opaque at body temperature because of ELP's lower critical solution temperature behavior. This opacity obstructs light-based observation of the morphology and behavior of encapsulated cells. In order to improve the transparency of ELP hydrogels for better imaging, we have designed a hybrid ELP-polyethylene glycol (PEG) hydrogel system that rapidly cross-links with tris(hydroxymethyl) phosphine (THP) in aqueous solution via Mannich-type condensation. As expected, addition of the hydrophilic PEG component significantly improves the light transmittance. Coherent anti-Stokes Raman scattering (CARS) microscopy reveals that the hybrid ELP-PEG hydrogels have smaller hydrophobic ELP aggregates at 37 °C. Importantly, this hydrogel platform enables independent tuning of adhesion ligand density and matrix stiffness, which is desirable for studies of cell-matrix interactions. Human fibroblasts encapsulated in these hydrogels show high viability (>98%) after 7 days of culture. High-resolution confocal microscopy of encapsulated fibroblasts reveals that the cells adopt a more spread morphology in response to higher RGD ligand concentrations and softer gel mechanics.

Activation of the ERK1/2 signaling pathway during the osteogenic differentiation of mesenchymal stem cells cultured on substrates modified with various chemical groups

The current study examined the influence of culture substrates modified with the functional groups –OH, –COOH, –NH₂, and –CH₃ using SAMs technology, in conjunction with TAAB control, on the osteogenic differentiation of rabbit BMSCs. The CCK-8 assay revealed that BMSCs exhibited substrate-dependent cell viability. The cells plated on –NH₂- and –OH-modified substrates were well spread and homogeneous, but those on the –COOH- and –CH₃-modified substrates showed more rounded phenotype. The mRNA expression of BMSCs revealed that –NH₂-modified substrate promoted the mRNA expression and osteogenic differentiation of the BMSCs. The contribution of ERK1/2 signaling pathway to the osteogenic differentiation of BMSCs cultured on the –NH₂-modified substrate was investigated in vitro. The –NH₂-modified substrate promoted the expression of integrins; the activation of FAK and ERK1/2. Inhibition of ERK1/2 activation by PD98059, a specific inhibitor of the ERK signaling pathway, blocked ERK1/2 activation in a dose-dependent manner, as revealed for expression of Cbfα-1 and ALP. Blockade of ERK1/2 phosphorylation in BMSCs by PD98059 suppressed osteogenic differentiation on chemical surfaces. These findings indicate a potential role for ERK in the osteogenic differentiation of BMSCs on surfaces modified by specific chemical functional groups, indicating that the microenvironment affects the differentiation of BMSCs. This observation has important implications for bone tissue engineering.

Orthogonality in organic, polymer, and supramolecular chemistry: from Merrifield to click chemistry

The concept of orthogonality has been applied to many areas of chemistry, ranging from wave functions to chromatography. But it was Barany and Merrifield's orthogonal protecting group strategy that paved the way for solid phase peptide syntheses, other important classes of biomaterials such as oligosaccharides and oligonucleotides, and ultimately to a term in widespread usage that is focused on chemical reactivity and binding selectivity. The orthogonal protection strategy has been extended to the development of orthogonal activation, and recently the click reaction, for streamlining organic synthesis. The click reaction and its variants are considered orthogonal as the components react together in high yield and in the presence of many other functional groups. Likewise, supramolecular building blocks can also be orthogonal, thereby enabling programmed self-assembly, a superb strategy to create complex architectures. Overall, orthogonal reactions and supramolecular interactions have dramatically improved the syntheses, the preparation of functional materials, and the self-assembly of nanoscale structures.

Comparison of neurite growth in three dimensional natural and synthetic hydrogels

Extracellular matrix incorporated within a scaffold plays an important role in assisting cell behavior in neural tissue engineering. In this study, we investigated how the concentration of fibronectin (FN) affected neurite growth when incorporated within a synthetic polymer gel made of poly(ethylene glycol) (PEG) or a natural polymer gel of collagen I. Mechanical and chemical properties of the scaffold were varied by using a range of concentrations of gels and FN. Rheology was used to determine the mechanical stiffness of hydrogels and neurite length and viability were measured to evaluate cell response. In both types of gels, increasing the concentration of the base scaffold (PEG or collagen) increased the mechanical stiffness as denoted by G∗. Neurite lengths in PEG gels increased with increasing FN concentration and decreased with increasing G∗. In collagen gels, FN reduced neurite extension for the lowest concentrations of collagen (0.4-0.6 mg/mL) while FN increased neurite extension for mid and high collagen concentrations (1.0-2.0 mg/mL). The results from these two different scaffolds indicate that both stiffness and FN concentration impact the growth of the neurite and that the addition of small amounts of FN (100 μg/ml) permits PEG gels to perform on par with similar stiffness collagen gels.

Injectable and biodegradable hydrogels: gelation, biodegradation and biomedical applications

Injectable hydrogels with biodegradability have in situ formability which in vitro/in vivo allows an effective and homogeneous encapsulation of drugs/cells, and convenient in vivo surgical operation in a minimally invasive way, causing smaller scar size and less pain for patients. Therefore, they have found a variety of biomedical applications, such as drug delivery, cell encapsulation, and tissue engineering. This critical review systematically summarizes the recent progresses on biodegradable and injectable hydrogels fabricated from natural polymers (chitosan, hyaluronic acid, alginates, gelatin, heparin, chondroitin sulfate, etc.) and biodegradable synthetic polymers (polypeptides, polyesters, polyphosphazenes, etc.). The review includes the novel naturally based hydrogels with high potential for biomedical applications developed in the past five years which integrate the excellent biocompatibility of natural polymers/synthetic polypeptides with structural controllability via chemical modification. The gelation and biodegradation which are two key factors to affect the cell fate or drug delivery are highlighted. A brief outlook on the future of injectable and biodegradable hydrogels is also presented (326 references).

The effects of electrospun TSF nanofiber diameter and alignment on neuronal differentiation of human embryonic stem cells

Although transplantation of human embryonic stem cells (hESCs)-derived neural precursors (NPs) has been demonstrated with some success for nervous repair in small animal model, control of the survival, and directional differentiation of these cells is still challenging. Meanwhile, the notion that using suitable scaffolding materials to control the growth and differentiation of grafted hESC-derived NPs raises the hope for better clinical nervous repair. In this study, we cultured hESC-derived NPs on Tussah silk fibroin (TSF)-scaffold of different diameter (i.e., 400 and 800 nm) and orientation (i.e., random and aligned) to analyze the effect of fiber diameter and alignment on the cell viability, neuronal differentiation, and neurite outgrowth of hESC-derived NPs. The results show that TSF-scaffold supports the survival, migration, and differentiation of hESC-derived NPs. Aligned TSF-scaffold significantly promotes the neuronal differentiation and neurite outgrowth of hESC-derived neurons compared with random TSF-scaffold. Moreover, on aligned 400 nm fibers cell viability, neuronal differentiation and neurite outgrowth are greater than that on aligned 800 nm fibers. Together, these results demonstrate that aligned 400 nm TSF-scaffold is more suitable for the development of hESC-derived NPs, which shed light on optimization of the therapeutic potential of hESCs to be employed for neural regeneration.

Protein assembly directed by synthetic molecular recognition motifs

Tris-functionalized cyanuric acid (TCA) and melamine (TM) selectively recognize each other in aqueous solution with 1 : 1 stoichiometry. We have coupled biotin to TCA and TM to allow pseudo-tetrahedral display of TCA and TM on streptavidin through biotin-ligand binding. Synthetic cyanuric acid/melamine recognition is found to drive selective protein-protein assembly.

Hydrogels in spinal cord injury repair strategies

Nowadays there are at present no efficient therapies for spinal cord injury (SCI), and new approaches have to be proposed. Recently, a new regenerative medicine strategy has been suggested using smart biomaterials able to carry and deliver cells and/or drugs in the damaged spinal cord. Among the wide field of emerging materials, research has been focused on hydrogels, three-dimensional polymeric networks able to swell and absorb a large amount of water. The present paper intends to give an overview of a wide range of natural, synthetic, and composite hydrogels with particular efforts for the ones studied in the last five years. Here, different hydrogel applications are underlined, together with their different nature, in order to have a clearer view of what is happening in one of the most sparkling fields of regenerative medicine.

Stem cell cultivation in bioreactors

Cell-based therapies have generated great interest in the scientific and medical communities, and stem cells in particular are very appealing for regenerative medicine, drug screening and other biomedical applications. These unspecialized cells have unlimited self-renewal capacity and the remarkable ability to produce mature cells with specialized functions, such as blood cells, nerve cells or cardiac muscle. However, the actual number of cells that can be obtained from available donors is very low. One possible solution for the generation of relevant numbers of cells for several applications is to scale-up the culture of these cells in vitro. This review describes recent developments in the cultivation of stem cells in bioreactors, particularly considerations regarding critical culture parameters, possible bioreactor configurations, and integration of novel technologies in the bioprocess development stage. We expect that this review will provide updated and detailed information focusing on the systematic production of stem cell products in compliance with regulatory guidelines, while using robust and cost-effective approaches.

Combination of hyaluronic acid hydrogel scaffold and PLGA microspheres for supporting survival of neural stem cells

PURPOSE

To develop a biomaterial composite for promoting proliferation and migration of neural stem cells (NSCs), as well as angiogenesis on the materials, to rescue central nervous system (CNS) injuries.

METHODS

A delivery system was constructed based on cross-linked hyaluronic acid (HA) hydrogels, containing embedded BDNF and VEGF-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres for controlled delivery and support for NSCs in the CNS. The surface morphologies were evaluated by SEM and AFM, mechanical property was investigated by rheological tests, and release kinetics were performed by ELISA. Bioactivity of released BDNF and VEGF was assessed by neuron and endothelial cell culture, respectively. Compatibility with NSCs was studied by immunofluorescent staining.

RESULTS

Release kinetics showed the delivery of BDNF and VEGF from PLGA microspheres and HA hydrogel composite were sustainable and stable, releasing ~20-30% within 150 h. The bioactivities preserved well to promote survival and growth of the cells. Evaluation of structure and mechanical properties showed the hydrogel composite possessed an elastic scaffold structure. Biocompatibility assay showed NSCs adhered and proliferated well on the hydrogel.

CONCLUSIONS

Our created HA hydrogel/PLGA microsphere systems have a good potential for controlled delivery of varied biofactors and supporting NSCs for brain repair and implantation.

Hydrogel for Cell Housing in the Brain and in the Spinal Cord

Purpose

Neurons in the adult mammalian central nervous system do not proliferate or renew themselves and consequently strong interest in cell replacement therapies to repair brain and spinal cord damages has emerged in the last decade.

Methods

An injectable resorbable hydrogel with a controlled nanostructure, specifically designed for neural cell housing, was developed together with a new protocol for building three-dimensional (3D) biohybrid cell/hydrogel constructs: cells are housed within the polymeric matrix which is directly built with a specific cell culture media. This matrix was tested with standard glial populations, primary astrocytes and mesenchymal stem cells.

Results

Physico-chemical characterization of the hydrogel matrix confirmed a 2- week (+ 2 days) stability before massive degradation; mean mesh size of about 5 nm and thixotropic behavior with transition yield stress at 60+5 Pa. Cell survival within the hydrogel resulted in about 55±5% (minimum value) survivals, data also confirmed by optical assessments. Cell viability also remained high after extraction from the gel, indicating survival to inclusion latency period.

Conclusions

Since the intimate structure of the gel mimics extracellular matrix cells as would be expected to be found in an in vivo context, this polymeric formulation is a promising base for building 3D constructs for neural cell housing, in which cells are embedded and kept alive directly from the time of polycondensation.

Polymeric implant materials for the reconstruction of tracheal and pharyngeal mucosal defects in head and neck surgery

The existing therapeutical options for the tracheal and pharyngeal reconstruction by use of implant materials are described. Inspite of a multitude of options and the availability of very different materials none of these methods applied for tracheal reconstruction were successfully introduced into the clinical routine. Essential problems are insufficiencies of anastomoses, stenoses, lack of mucociliary clearance and vascularisation. The advances in Tissue Engineering (TE) offer new therapeutical options also in the field of the reconstructive surgery of the trachea. In pharyngeal reconstruction far reaching developments cannot be recognized at the moment which would allow to give a prognosis of their success in clinical application. A new polymeric implant material consisting of multiblock copolymers was applied in our own work which was regarded as a promising material for the reconstruction of the upper aerodigestive tract (ADT) due to its physicochemical characteristics. In order to test this material for applications in the ADT under extreme chemical, enzymatical, bacterial and mechanical conditions we applied it for the reconstruction of a complete defect of the gastric wall in an animal model. In none of the animals tested either gastrointestinal complications or negative systemic events occurred, however, there was a multilayered regeneration of the gastric wall implying a regular structured mucosa.

In future the advanced stem cell technology will allow further progress in the reconstruction of different kind of tissues also in the field of head and neck surgery following the principles of Tissue Engineering.

Engineering a stem cell house into a home

In the body, tissue homeostasis is established and maintained by resident tissue-specific adult stem cells (aSCs). Through preservation of bidirectional communications with the surrounding niche and integration of biophysical and biochemical cues, aSCs actively direct the regeneration of aged, injured and diseased tissues. Currently, the ability to guide the behavior and fate of aSCs in the body or in culture after prospective isolation is hindered by our poor comprehension of niche composition and the regulation it imposes. Two-and three-dimensional biomaterials approaches permit systematic analysis of putative niche elements as well as screening approaches to identify novel regulatory mechanisms governing stem cell fate. The marriage of stem cell biology with creative bioengineering technology has the potential to expand our basic understanding of stem cell regulation imposed by the niche and to develop novel regenerative medicine applications.