Modern microwave methods in solid-state inorganic materials chemistry: from fundamentals to manufacturing

Modulating Near-Infrared Persistent Luminescence via Diverse Preparation Approaches

Near-infrared (NIR) persistent luminescence (PersL) materials have attracted extensive attention due to their great promise in medical diagnostics, bio-imaging, night vision surveillance, multi-level anticounterfeiting, and information encryption. To achieve NIR PersL (micro/nano-) materials with the desired properties, a variety of synthesis methods have been employed, including solid-phase reaction and liquid-phase synthesis. Different synthesis methods have different but important effects on the micro/nano-structure, luminescence, and PersL properties of the materials. Moreover, the influence of various synthesis methods on the properties of NIR PersL materials determines the selection of preparation approaches for other new material systems. Taking the representative NIR PersL ZnGa2O4:Cr3+ material as an example, four synthesis procedures are applied, namely, high-temperature solid-state reaction (SSR), high-temperature molten salt method (MSM), hydrothermal method (HM), and microwave-assisted solid-state (MASS) method. The structural and luminescent properties of samples made by SSR, MSM, HM, and MASS are compared. Notably, it is revealed that the MASS method can create additional trapping energy levels, which is of great significance for emerging applications. This work demonstrates the different effects of synthesis methods on PersL performance and provides a good guideline for the rapid and reasonable selection of preparation methods for diverse applications.

Improvements in the utilization of calcium carbonate in promoting sustainability and environmental health

Calcium carbonate (CaCO3) is an incredibly abundant mineral on Earth, with over 90% of it being found in the lithosphere. To address the CO2 crisis and combat ocean acidification, it is essential to produce more CaCO3 using various synthetic methods. Additionally, this approach can serve as a substitute for energy-intensive processes like cement production. By doing so, we have the potential to not only reverse the damage caused by climate change but also protect biological ecosystems and the overall environment. The key lies in maximizing the utilization of CaCO3 in various human activities, paving the way for a more sustainable future for our planet.

Metal-organic frameworks for biomedical applications: A review

Metal-organic frameworks (MOFs) are emergent materials in diverse prospective biomedical uses, owing to their inherent features such as adjustable pore dimension and volume, well-defined active sites, high surface area, and hybrid structures. The multifunctionality and unique chemical and biological characteristics of MOFs allow them as ideal platforms for sensing numerous emergent biomolecules with real-time monitoring towards the point-of-care applications. This review objects to deliver key insights on the topical developments of MOFs for biomedical applications. The rational design, preparation of stable MOF architectures, chemical and biological properties, biocompatibility, enzyme-mimicking materials, fabrication of biosensor platforms, and the exploration in diagnostic and therapeutic systems are compiled. The state-of-the-art, major challenges, and the imminent perspectives to improve the progressions convoluted outside the proof-of-concept, especially for biosensor platforms, imaging, and photodynamic therapy in biomedical research are also described. The present review may excite the interdisciplinary studies at the juncture of MOFs and biomedicine.

Microwave-assisted solvothermal synthesis of nanostructured Ga-Doped Li7La3Zr2O12 solid electrolyte with enhanced densification and Li-ion conductivity

Garnet-type Li7La3Zr2O12 (LLZO) Li-ion solid electrolytes are promising candidates for safe, next-generation solid-state batteries. In this study, we synthesize Ga-doped LLZO (Ga-LLZO) electrolytes using a microwave-assisted solvothermal method followed by low-temperature heat treatment. The nanostructured precursor (<50 nm) produced by the microwave-assisted solvothermal process has a high surface energy, facilitating the reaction for preparing garnet-type Ga-LLZO powders (<800 nm) within a short time (<5 h) at a low calcination temperature (<700 °C). Additionally, the calcined nanostructured Ga-LLZO powder can be sintered to produce a high-density pellet with minimized grain boundaries under moderate sintering conditions (temperature: 1150 °C, duration: 10 h). The optimal doping concentration was determined to be 0.4 mol% Ga, which resulted significantly increased the ionic conductivity (1.04 × 10-3 S cm-1 at 25 °C) and stabilized the cycling performance over 1700 h at 0.4 mA cm-2. This approach demonstrates the potential to synthesize oxide-type solid electrolyte materials with improved properties for solid-state batteries.

Concentration-dependent luminescence characterization of terbium-doped strontium aluminate nanophosphors

The present investigation describes the synthesis of luminescent terbium-doped strontium aluminate nanoparticles emitting bright green light, which were synthesized through a solid-state reaction method assisted by microwave radiation. Various samples containing different concentrations of Tb were synthesized, and an analysis of their structural and morphological features was conducted using powder x-ray diffraction, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The band gaps of the samples were determined utilizing the Kubelka-Munk method. The quenching mechanism observed was identified to be due to dipole-dipole interaction using the Dexter theory. The optimized sample with a terbium concentration of 4 at.% has a luminescence lifetime of 1.05 ms with 20.62% quantum efficiency. The results of this study indicate that the terbium-doped strontium aluminate fluorescent nanoparticles exhibit promising potential for a wide range of applications, including bioimaging, sensing and solid-state lighting.

Synthesis and Properties of Hydrophilic and Hydrophobic Deep Eutectic Solvents via Heating-Stirring and Ultrasound

Deep eutectic solvents (DESs) have emerged as a greener alternative to other more polluting traditional solvents and have attracted a lot of interest in the last two decades. The DESs are less toxic dissolvents and have a lower environmental footprint. This paper presents an alternative synthesis method to the classical heating-stirring method. The ultrasound method is one of the most promising synthesis methods for DESs in terms of yield and energy efficiency. Therefore, the ultrasound synthesis method was studied to obtain hydrophobic (Aliquat 336:L-Menthol (3:7); Lidocaine:Decanoic acid (1:2)) and hydrophilic DESs based on choline chloride, urea, ethylene glycol and oxalic acid. The physical characterization of DESs via comparison of Fourier transform infrared (FTIR) spectra showed no difference between the DESs obtained by heating-stirring and ultrasound synthesis methods. The study and comparison of all the prepared DESs were carried out via nuclear magnetic resonance spectroscopy (NMR). The density and viscosity properties of DESs were evaluated. The density values were similar for both synthesis methods. However, differences in viscosity values were detected due to the presence of some water in hygroscopic DESs.

Ultrafast micro/nano-manufacturing of metastable materials for energy

The structural engineering of metastable nanomaterials with abundant defects has attracted much attention in energy-related fields. The high-temperature shock (HTS) technique, as a rapidly developing and advanced synthesis strategy, offers significant potential for the rational design and fabrication of high-quality nanocatalysts in an ultrafast, scalable, controllable and eco-friendly way. In this review, we provide an overview of various metastable micro- and nanomaterials synthesized via HTS, including single metallic and bimetallic nanostructures, high entropy alloys, metal compounds (e.g. metal oxides) and carbon nanomaterials. Note that HTS provides a new research dimension for nanostructures, i.e. kinetic modulation. Furthermore, we summarize the application of HTS-as supporting films for transmission electron microscopy grids-in the structural engineering of 2D materials, which is vital for the direct imaging of metastable materials. Finally, we discuss the potential future applications of high-throughput and liquid-phase HTS strategies for non-equilibrium micro/nano-manufacturing beyond energy-related fields. It is believed that this emerging research field will bring new opportunities to the development of nanoscience and nanotechnology in both fundamental and practical aspects.

Microwave Encounters Ionic Liquid: Synergistic Mechanism, Synthesis and Emerging Applications

Progress in microwave (MW) energy application technology has stimulated remarkable advances in manufacturing and high-quality applications of ionic liquids (ILs) that are generally used as novel media in chemical engineering. This Review focuses on an emerging technology via the combination of MW energy and the usage of ILs, termed microwave-assisted ionic liquid (MAIL) technology. In comparison to conventional routes that rely on heat transfer through media, the contactless and unique MW heating exploits the electromagnetic wave-ions interactions to deliver energy to IL molecules, accelerating the process of material synthesis, catalytic reactions, and so on. In addition to the inherent advantages of ILs, including outstanding solubility, and well-tuned thermophysical properties, MAIL technology has exhibited great potential in process intensification to meet the requirement of efficient, economic chemical production. Here we start with an introduction to principles of MW heating, highlighting fundamental mechanisms of MW induced process intensification based on ILs. Next, the synergies of MW energy and ILs employed in materials synthesis, as well as their merits, are documented. The emerging applications of MAIL technologies are summarized in the next sections, involving tumor therapy, organic catalysis, separations, and bioconversions. Finally, the current challenges and future opportunities of this emerging technology are discussed.

A bacterial cellulose-based LiSrVO4:Eu3+ nanosensor platform for smartphone sensing of levodopa and dopamine: point-of-care diagnosis of Parkinson's disease

Among the catecholamines, dopamine (DA) is essential in regulating multiple aspects of the central nervous system. The level of dopamine in the brain correlates with neurological diseases such as Parkinson's disease (PD). However, dopamine is unable to cross the blood-brain barrier (BBB). Therefore, levodopa (LD) is used to restore normal dopamine levels in the brain by crossing the BBB. Thus, the control of LD and DA levels is critical for PD diagnosis. For this purpose, LiSr0.0985VO4:0.015Eu3+ (LSV:0.015Eu3+) nanoplates were synthesized by the microwave-assisted co-precipitation method, and have been employed as an optical sensor for the sensitive and selective detection of catecholamines. The synthesized LSV:0.015Eu3+ nanoplates emitted red fluorescence with a high quantum yield (QY) of 48%. By increasing the LD and DA concentrations, the fluorescence intensity of LSV:0.015Eu3+ nanoplates gradually decreased. Under optimal conditions, the linear dynamic ranges were 1-40 μM (R2 = 0.9972) and 2-50 μM (R2 = 0.9976), and the detection limits (LOD) were 279 nM, and 390 nM for LD and DA, respectively. Herein, an instrument-free, rapid quantification visual assay was developed using a paper-based analytical device (PAD) with LSV:0.015Eu3+ fixed on the bacterial cellulose nanopaper (LEBN) to determine LD and DA concentrations with ease of operation and low cost. A smartphone was coupled with the PAD device to quantitatively analyze the fluorescence intensity changes of LSV:0.015Eu3+ using the color recognizer application (APP). In addition, the LSV:0.015Eu3+ nanosensor showed acceptable repeatability and was used to analyze real human urine, blood serum, and tap water samples with a recovery of 96-107%.

Direct microwave energy input on a single cation for outstanding selective catalysis

Microwave (MW)-driven catalytic systems are attracting attention not only as an aggressive electrification strategy of the chemical industry but also as creating a unique catalytic reaction field that conventional equilibrium heating cannot achieve. This study unlocked direct and selective heating of single alkali metal cations in the pores of aluminosilicate zeolites under MW. Selectively heated Cs+ cations in FAU zeolite exhibited selective CH4 combustion performance, that is, COx generation at the heated Cs+ cations selectively occurred while side reactions in the low-temperature gas phase were suppressed. The Cs-O pair distribution function revealed by synchrotron-based in situ x-ray total scattering gave us direct evidence of peculiar displacement induced by MW, which was consistent with the results of molecular dynamics simulation mimicking MW heating. The concept of selective monoatomic heating by MW is expected to open a next stage in "microwave catalysis" science by providing physicochemical insights into "microwave effects."

Extending the Chemistry of Layered Solids and Nanosheets: Chemistry and Structure of MAX Phases, MAB Phases and MXenes

MAX phases are layered solids with unique properties combining characteristics of ceramics and metals. MXenes are their two-dimensional siblings that can be synthesized as van der Waals-stacked and multi-/single-layer nanosheets, which possess chemical and physical properties that make them interesting for a plethora of applications. Both families of materials are highly versatile in terms of their chemical composition and theoretical studies suggest that many more members are stable and can be synthesized. This is very intriguing because new combinations of elements, and potentially new structures, can lead to further (tunable) properties. In this review, we focus on the synthesis science (including non-conventional approaches) and structure of members less investigated, namely compounds with more exotic M-, A-, and X-elements, for example nitrides and (carbo)nitrides, and the related family of MAB phases.

Effect of linearly polarized microwaves on nanomorphology of calcium carbonate mineralization using peptides

Microwaves are used for diverse applications such as mobile phones, ovens, and therapy devices. However, there are few reports on the effects of microwaves on diseases other than cancer, and on physiological processes. Here, we focused on CaCO₃ mineralization as a model of biomineralization and attempted to elucidate the effect of microwaves on CaCO₃ mineralization using peptides. We conducted AFM, ζ potential, HPLC, ICP-AES, and relative permittivity measurements. Our findings show that microwaves alter the nanomorphology of the CaCO₃ precipitate, from sphere-like particles to string-like structures. Furthermore, microwaves have little effect on the mineralization when the mineralization ability of a peptide is high, but a large effect when the precipitation ability is low. Our findings may be applicable to not only the treatment of teeth and bones but also the development of organic-inorganic nanobiomaterials. This methodology can be expanded to other molecular/atomic reactions under various microwave conditions to alter reaction activity parameters.

Carbon-Free Conversion of SiO2 to Si via Ultra-Rapid Alloy Formation: Toward the Sustainable Fabrication of Nanoporous Si for Lithium-Ion Batteries

Silicon has the potential to improve lithium-ion battery (LIB) performance substantially by replacing graphite as an anode. The sustainability of such a transformation, however, depends on the source of silicon and the nature of the manufacturing process. Today's silicon industry still overwhelmingly depends on the energy-intensive, high-temperature carbothermal reduction of silica─a process that adversely impacts the environment. Rather than use conventional thermoreduction alone to break Si-O bonds, we report the efficient conversion of SiO₂ directly to Mg₂Si by a microwave-induced Mg plasma within 2.5 min at merely 200 W under vacuum. The underlying mechanism is proposed, wherein electrons with enhanced kinetics function readily as the reductant while the "bombardment" from Mg cations and electrons promotes the fast nucleation of Mg₂Si. The 3D nanoporous (NP) Si is then fabricated by a facile thermal dealloying step. The resulting hierarchical NP Si anodes deliver stable, extended cycling with excellent rate capability in Li-ion half-cells, with capacities several times greater than graphite. The microwave-induced metal plasma (MIMP) concept can be applied just as efficiently to the synthesis of Mg₂Si from Si, and the chemistry should be extendable to the reduction of multiple metal(loid) oxides via their respective Mg alloys.

Fundamentals of the Cathode-Electrolyte Interface in All-solid-state Lithium Batteries

All-solid-state lithium batteries (ASSBs) enabled by solid-state electrolytes (SEs) including oxide-based and sulfide-based electrolytes have gained worldwide attention because of their intrinsic safety and higher energy density over conventional lithium-ion batteries (LIBs). However, despite the high ionic conductivity of advanced SEs, ASSBs still exhibit high overall internal resistance, the most significant contributor of which can be ascribed to the cathode-SE interfaces. This review seeks to clarify the critical issues regarding the cathode-SE interfaces, including fundamental principles and corresponding solutions. First, major issues concerning electro-chemo-mechanical instability between cathodes and SEs and their formation mechanisms are discussed. Then, specific problems in oxides and sulfides and various solutions and strategies toward interfacial modifications are highlighted. Efforts toward the characterization and analysis of cathode-SE interfaces with advanced techniques are also summarized. Finally, perspectives are offered on several problems demanding urgent solutions and the future development of SE applications and ASSBs.

Optimizing the Mechanoluminescent Properties of CaZnOS:Tb via Microwave-Assisted Synthesis: A Comparative Study with Conventional Thermal Methods

Recent developments in lighting and display technologies have led to an increased focus on materials and phosphors with high efficiency, chemical stability, and eco-friendliness. Mechanoluminescence (ML) is a promising technology for new lighting devices, specifically in pressure sensors and displays. CaZnOS has been identified as an efficient ML material, with potential applications as a stress sensor. This study focuses on optimizing the mechanoluminescent properties of CaZnOS:Tb through microwave-assisted synthesis. We successfully synthesized CaZnOS doped with Tb3+ using this method and compared it with samples obtained through conventional solid-state methods. We analyzed the material's characteristics using various techniques to investigate their structural, morphological, and optical properties. We then studied the material's mechanoluminescent properties through single impacts with varying energies. Our results show that materials synthesized through microwave methods exhibit similar optical and, primarily, mechanoluminescent properties, making them suitable for use in photonics applications. The comparison of the microwave and conventional solid-state synthesis methods highlights the potential of microwave-assisted methods to optimize the properties of mechanoluminescent materials for practical applications.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Fast Microwave-Assisted Synthesis, Calcination and Functionalization of a Silica Mesoporous Nanomaterial: UVM-7

We report here, for the first time, the use of a solid state microwave source for the synthesis, calcination and functionalization of a UVM-7 based hybrid mesoporous silica material. The synthesis of the UVM-7 material is obtained in 2 min at low power (50 W) by the combination of a microwave irradiation and the atrane route. Moreover, it has been successfully calcined and functionalized in just 13 and 4 min respectively with microwave assisted procedures. A total synthesis comprising each individually optimized step, can be executed in only 4 h including work-up, by contrast to a typical synthesis that comprises several days. Savings higher than one order or magnitude are obtained in time and energy. Our example is a proof of concept of the potential use of solid state microwave generators for the ultrafast on-command preparation of hybrid nanomaterials due to their accurate control and accelerating properties.

Hydrogen-substituted graphdiyne-assisted ultrafast sparking synthesis of metastable nanomaterials

Metastable nanomaterials, such as single-atom and high-entropy systems, with exciting physical and chemical properties are increasingly important for next-generation technologies. Here, we developed a hydrogen-substituted graphdiyne-assisted ultrafast sparking synthesis (GAUSS) platform for the preparation of metastable nanomaterials. The GAUSS platform can reach an ultra-high reaction temperature of 3,286 K within 8 ms, a rate exceeding 10⁵ K s^-1. Controlling the composition and chemistry of the hydrogen-substituted graphdiyne aerogel framework, the reaction temperature can be tuned from 1,640 K to 3,286 K. We demonstrate the versatility of the GAUSS platform with the successful synthesis of single atoms, high-entropy alloys and high-entropy oxides. Electrochemical measurements and density functional theory show that single atoms synthesized by GAUSS enhance the lithium-sulfur redox reaction kinetics in all-solid-state lithium-sulfur batteries. Our design of the GAUSS platform offers a powerful way to synthesize a variety of metastable nanomaterials.

The Properties of Microwave-Assisted Synthesis of Metal-Organic Frameworks and Their Applications

Metal-organic frameworks (MOF) are a class of porous materials with various functions based on their host-guest chemistry. Their selectivity, diffusion kinetics, and catalytic activity are influenced by their design and synthetic procedure. The synthesis of different MOFs has been of considerable interest during the past decade thanks to their various applications in the arena of sensors, catalysts, adsorption, and electronic devices. Among the different techniques for the synthesis of MOFs, such as the solvothermal, sonochemical, ionothermal, and mechanochemical processes, microwave-assisted synthesis has clinched a significant place in MOF synthesis. The main assets of microwave-assisted synthesis are the short reaction time, the fast rate of nucleation, and the modified properties of MOFs. The review encompasses the development of the microwave-assisted synthesis of MOFs, their properties, and their applications in various fields.

Double Doping of BiCuSeO with Ca and Pb to Increase the Electrical Transport Properties and Reduce the Lattice Thermal Conductivity Synchronously

A series of nearly single-phase Ca- and Pb-codoped BiCuSeO bulks are fabricated via 4 min of microwave heating and 5 min of spark plasma sintering (SPS). The phase composition, microstructure, and valence state of the samples are investigated systematically, and the effects of Ca and Pb dopants being added into the samples to the alternative Bi sites on the cooperative optimization of the electrical and thermal transport properties are discussed. After codoping, the electrical conductivity and power factor of the samples are significantly improved by synchronously optimizing the carrier concentration and carrier mobility. The codoping of Ca and Pb reduces the lattice thermal conductivity, which is attributed to the introduction of high-density stacking faults and nanoprecipitates formed in the process of microwave synthesis and SPS, as well as the fluctuation of volume and mass. As a result, a maximum ZT value of 1.04 in Bi_0.88Ca_0.06Pb_0.06CuSeO is achieved at 873 K, which is ∼2 times larger than that of the undoped BiCuSeO. The remarkable enhancement of the thermoelectric properties combined with the simplicity and high efficiency of the synthesis method emphasizes that the preparation process will have a wide range of application prospects in the future thermoelectric field.

Plasma-Assisted Reforming of Methane

Methane (CH4 ) is inexpensive, high in heating value, relatively low in carbon footprint compared to coal, and thus a promising energy resource. However, the locations of natural gas production sites are typically far from industrial areas. Therefore, transportation is needed, which could considerably increase the sale price of natural gas. Thus, the development of distributed, clean, affordable processes for the efficient conversion of CH4 has increasingly attracted people's attention. Among them are plasma technology with the advantages of mild operating conditions, low space need, and quick generation of energetic and chemically active species, which allows the reaction to occur far from the thermodynamic equilibrium and at a reasonable cost. Significant progress in plasma-assisted reforming of methane (PARM) is achieved and reviewed in this paper from the perspectives of reactor development, thermal and nonthermal PARM routes, and catalysis. The factors affecting the conversion of reactants and the selectivity of products are studied. The findings from the past works and the insight into the existing challenges in this work should benefit the further development of reactors, high-performance catalysts, and PARM routes.

Chemistry must respond to the crisis of transgression of planetary boundaries

Recent assessments alarmingly indicate that many of the world's leading chemicals are transgressing one or more of the nine planetary boundaries, which define safe operating spaces within which humanity can continue to develop and thrive for generations to come. The unfolding crisis cannot be ignored and there is a once-in-a-century opportunity for chemistry - the science of transformation of matter - to make a critical difference to the future of people and planet. How can chemists contribute to meeting these challenges and restore stability and strengthen resilience to the planetary system that humanity needs for its survival? To respond to the wake-up call, three crucial steps are outlined: (1) urgently working to understand the nature of the looming threats, from a chemistry perspective; (2) harnessing the ingenuity and innovation that are central to the practice of chemistry to develop sustainable solutions; and (3) transforming chemistry itself, in education, research and industry, to re-position it as 'chemistry for sustainability' and lead the stewardship of the world's chemical resources. This will require conservation of material stocks in forms that remain available for use, through attention to circularity, as well as strengthening engagement in systems-based approaches to designing chemistry research and processes informed by convergent working with many other disciplines.

Non-cytotoxic Dy3+ activated La10W22O81 nanophosphors for UV based cool white LEDs and anticancer applications

White-light-emitting La₁₀W₂₂O₈₁ (LWO): xDy³⁺ (0.5 ≤ x ≤ 10 mol%) nanocrystalline phosphors were developed by a facile hydrothermal assisted solid-state reaction. X-ray diffraction (XRD) pattern indicated that the prepared samples adopted orthorhombic crystal structures. The agglomeration of uniform nanorods was identified from the FE-SEM analysis of the optimized LWO: 1.5 mol% Dy³⁺ nanocrystalline phosphors. Additionally, transmission electron microscope, scanning transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy were employed to explore the surface morphology, size, interplanar distance, and chemical composition with valence states of the LWO: 1.5 mol% Dy³⁺ phosphors, respectively. By exciting with 387 nm, the LWO: Dy³⁺ emission spectra showed two intense peaks at 476 nm (⁴F_9/2→⁶H_15/2) and 571 nm (⁴F_9/2→⁶H_13/2) and a shoulder peak at 659 nm (⁴F_9/2→⁶H_11/2). Optimum emission intensity was achieved for 1.5 mol% Dy³⁺ in the LWO host lattice. The luminescence quenching beyond 1.5 mol% Dy³⁺ is attributed to the dipole-dipole interactions when the Dy³⁺ (donor) and Dy³⁺ (acceptor) ions are at a critical distance of 58.53 Å. Photometric studies were conducted to evaluate the performance and practical applicability of the phosphors. The CIE chromaticity diagram suggests that the LWO: 1.5 mol% Dy³⁺ nanophosphor conspicuously exhibits cool white light. Therefore, this material could be a promising and potential white light-emitting nanocrystalline phosphor material for white light emitting diodes (LEDs) under near-UV excitation. In addition, the toxicity of the optimized nanophosphor in normal WI-38 lung fibroblast cells and MCF-7 breast cancer cells was examined. Surprisingly, LWO: 1.5 mol% Dy³⁺ nanophosphor was found to be non-cytotoxic to normal cells, but extremely toxic to cancer cells. Therefore, the nanophosphor materials can be considered potential candidates for biomedical applications, particularly for cancer treatment.

Energy-Saving Pathways for Thermoelectric Nanomaterial Synthesis: Hydrothermal/Solvothermal, Microwave-Assisted, Solution-Based, and Powder Processing

The pillars of Green Chemistry necessitate the development of new chemical methodologies and processes that can benefit chemical synthesis in terms of energy efficiency, conservation of resources, product selectivity, operational simplicity and, crucially, health, safety, and environmental impact. Implementation of green principles whenever possible can spur the growth of benign scientific technologies by considering environmental, economical, and societal sustainability in parallel. These principles seem especially important in the context of the manufacture of materials for sustainable energy and environmental applications. In this review, the production of energy conversion materials is taken as an exemplar, by examining the recent growth in the energy-efficient synthesis of thermoelectric nanomaterials for use in devices for thermal energy harvesting. Specifically, "soft chemistry" techniques such as solution-based, solvothermal, microwave-assisted, and mechanochemical (ball-milling) methods as viable and sustainable alternatives to processes performed at high temperature and/or pressure are focused. How some of these new approaches are also considered to thermoelectric materials fabrication can influence the properties and performance of the nanomaterials so-produced and the prospects of developing such techniques further.

Sulfated Well-Defined Mesoporous Nanostructured Zirconia for Levulinic Acid Esterification

Well-organized zirconia (ZrO₂) nanoparticles forming mesoporous materials have been successfully synthesized via a facile micelle-templating method using cetyltrimethylammonium bromide as a structure-directing template to control the nucleation/growth process and porosity. The systematic use of such a surfactant in combination with a microwave-assisted solvothermal (cyclohexane/water) reaction enabled the control of pore size in a narrow-size distribution range (3-17 nm). The effect of solvent mixture ratio on the porosity of the synthesized oxide was determined, and the controlled growth of zirconia nanoparticles was confirmed by means of powder X-ray diffraction, small-angle X-ray scattering, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy as well as N₂ physisorption isotherm analysis. Then, the as-prepared nanostructured zirconia oxides were treated with sulfuric acid to have sulfated samples. The catalytic performances of these mesoporous zirconia nanoparticles and their sulfated samples were tested for levulinic acid (LA) esterification by ethanol, with quantitative conversions of LA to ethyl levulinate after 8 h of reaction.

Synergy effect of microwave annealing and high-pressure hydrogen annealing on Poly-Si thin-film transistor

Grain boundary (GB) is a significant factor that deteriorates the transfer characteristics of poly-Si thin-film transistors (TFTs). In this study, we utilized the synergistic effect of microwave annealing (MWA) and high-pressure hydrogen annealing (HPHA) to effectively reduce grain boundary trap (GBT) density, resulting in improved field-effect mobility (μ) and subthreshold swing (SS). To investigate the synergistic effect of MWA and HPHA, the transfer characteristics of rapid thermal annealing and forming gas annealing devices were compared and analyzed as control devices. Furthermore, the mechanism of SS and mobility enhancement can be quantitatively understood by lowering the GB barrier height. In addition, Raman spectroscopy proved that poly-Si crystallinity was improved during MWA. Our results showed that MWA and HPHA play a vital role in reducing GBT density and improving poly-Si TFT characteristics.

Ultrafast Sintering for Ceramic-Based All-Solid-State Lithium-Metal Batteries

Long processing time and high temperatures are often required in sintering ceramic electrolytes, which lead to volatile element loss and high cost. Here, an ultrafast sintering method of microwave-induced carbothermal shock to fabricate various ceramic electrolytes in seconds is reported. Furthermore, it is also possible to integrate the electrode and electrolyte in one step by simultaneous co-sintering. Based on this ultrafast co-sintering technique, an all-solid-state lithium-metal battery with a high areal capacity is successfully achieved, realizing a promising electrochemical performance at room temperature. This method can extend to other various ceramic multilayer-based solid devices.

Research Progress on Preparation Methods of Skutterudites

Thermoelectric material is a new energy material that can realize the direct conversion of thermal energy and electric energy. It has important and wide applications in the fields of the recycling of industrial waste heat and automobile exhaust, efficient refrigeration of the next generation of integrated circuits and full spectrum solar power generation. Skutterudites have attracted much attention because of their excellent electrical trGiovanna Latronicoansport performance in the medium temperature region. In order to obtain skutterudites with excellent properties, it is indispensable to choose an appropriate preparation method. This review summarizes some traditional and advanced preparation methods of skutterudites in recent years. The basic principles of these preparation methods are briefly introduced. Single-phase skutterudites can be successfully obtained by these preparation methods. The study of these preparation methods also provides technical support for the rapid, low-cost and large-scale preparation of high-performance thermoelectric materials.

Crystal phase modified blue upconversion on Tm3+/Yb3+:BCZT ceramic phosphor benefits multifunctionality in white-light applications

Rare earth (RE) doped perovskite oxide hosts especially titanates, are promising phosphor materials in terms of white-light emission owing to their extraordinary properties such as an exceptional hosting environment for RE-ions and a switchable crystal phase near the phase boundary. Here, we report a new strategy of crystal phase modification to enhance the blue upconversion (UC) efficiency to such an extent that the combinational mixing of blue and green/red-emitting phosphor gives intense white emission. The Lead free (Ba_0.85Ca_0.15)(Zr,Ti)O₃ ceramics were synthesised at different sintering temperatures by incorporation of Tm³⁺/Yb³⁺ ions as dopants. The UC quantum efficiency of the Tm³⁺/Yb³⁺:BCZT sample sintered at 1300 °C was recorded at different excitation power densities. It was observed that the crystal phase transformation from tetragonal to rhombohedral symmetry in the sample near the phase boundary plays a cruicial role in improving the quantum efficiency. White-light emission applications were demonstrated by preparing biphasic samples with powder mixing of a BCZT:Tm³⁺/Yb³⁺ (blue-emitting) + BCZT:Er³⁺/Yb³⁺ (green/red-emitting) phosphor, and their composition were optimised at a mixed ratio. Thereafter, photometric characterization (CIE chromaticity, colour purity and corelated colour temperatures) was performed, and it indicated the suitability of the current biphasic samples in direct white-light (cooler) applications on an industrial scale. Crystal phase modified blue emission efficiency enhancement is a key feature of this work, which helps to generate approximately pure white-light with ideal chromacity (∼0.333, 0.343) emission when Tm³⁺/Yb³⁺:BCZT is mixed with a green emitting BCZT:Er³⁺/Yb³⁺ phosphor.

Microwave-Assisted Synthesis: Can Transition Metal Complexes Take Advantage of This “Green” Method?

Microwave-assisted synthesis is considered environmental-friendly and, therefore, in agreement with the principles of green chemistry. This form of energy has been employed extensively and successfully in organic synthesis also in the case of metal-catalyzed synthetic procedures. However, it has been less widely exploited in the synthesis of metal complexes. As microwave irradiation has been proving its utility as both a time-saving procedure and an alternative way to carry on tricky transformations, its use can help inorganic chemists, too. This review focuses on the use of microwave irradiation in the preparation of transition metal complexes and organometallic compounds and also includes new, unpublished results. The syntheses of the compounds are described following the group of the periodic table to which the contained metal belongs. A general overview of the results from over 150 papers points out that microwaves can be a useful synthetic tool for inorganic chemists, reducing dramatically the reaction times with respect to traditional heating. This is often accompanied by a more limited risk of decomposition of reagents or products by an increase in yield, purity, and (sometimes) selectivity. In any case, thermal control is operative, whereas nonthermal or specific microwave effects seem to be absent.

Microwave-Assisted Synthesis of 5′-O-methacryloylcytidine Using the Immobilized Lipase Novozym 435

Nucleobase building blocks have been demonstrated to be strong candidates when it comes to DNA/RNA-like materials by benefiting from hydrogen bond interactions as physical properties. Modifying at the 5′ position is the simplest way to develop nucleobase-based structures by transesterification using the lipase Novozym 435. Herein, we describe the optimization of the lipase-catalyzed synthesis of the monomer 5′-O-methacryloylcytidine with the assistance of microwave irradiation. Variable reaction parameters, such as enzyme concentration, molar ratio of the substrate, reaction temperature and reaction time, were investigated to find the optimum reaction condition in terms of obtaining the highest yield.

Microwave Synthesis and Enhanced Thermoelectric Performance of p-Type Bi0.90Pb0.10Cu1-xFexSeO Oxyselenides

BiCuSeO oxyselenide, one of the best oxygen-containing thermoelectric materials, is promising with great potential applications. In this work, we present a high ZT of >1.3 in Bi_0.90Pb_0.10Cu_0.96Fe_0.04SeO fabricated via microwave synthesis and subsequent spark plasma sintering (SPS). We added 3-4 atom % Fe to the Pb-doped BiCuSeO to regulate the hole carrier concentration and mobility to 0.8-1.0 × 10²⁰ cm^-3 and ∼40 cm² V^-1 S^-1, respectively, achieving moderate electrical conductivity, high Seebeck coefficient, and low carrier thermal conductivity simultaneously in a dual-doped sample. Under the synergistic enhancement by stress field, dislocation, and nanophase, the lattice thermal conductivity of Bi_0.90Pb_0.10Cu_0.96Fe_0.04SeO is limited to 0.24-0.49 W m^-1 K^-1 at 300-873 K. The development of efficient preparation methods for high-performance thermoelectric materials is significant to promote the application of thermoelectric conversion technology.

Recent progress in microwave-assisted preparations of 2D materials and catalysis applications

On the urgency of metal-free catalysts, two-dimensional materials (2DMs) have caused extensive researches because of distinctive optical and electronic properties. In the last decade, microwave methods have emerged in rapid and effective preparations of 2DMs for catalysis. Microwave heating offers several advantages namely direct, fast, selective heating and uniform reaction temperature compared to conventional heating methods, thus bringing about high-yield and high-purity products in minutes or even seconds. This review summarizes recent advances in microwave-assisted preparations of 2DMs-based catalysts and their state-of-the-art catalytic performances. Microwave heating mechanisms are briefly introduced mainly focusing on microwave-matter interactions, which can guide the choice of precursors, liquid media, substrates, auxiliaries and experiment parameters during microwave radiation. We especially provide a detailed insight into various microwave-assisted procedures, classified as exfoliation, synthesis, doping, modification and construction towards different 2DMs nanomaterials. We also discuss how microwave affects the synthetic composition and microstructure of 2DMs-based catalysts, thereby deeply influencing their optical and electronic properties and the catalytic performances. Finally, advantages, challenges and prospects of microwave-assisted approaches for 2DMs nanomaterials are summarized to inspire the effective and large-scale fabrication of novel 2DMs-based catalysts.

Adsorptive and photocatalytic remediation of hazardous organic chemical pollutants in aqueous medium: A review

The provision of clean water is still a major challenge in developing parts of the world, as emphasized by the United Nation Sustainable Development Goals (SDG 6), and has remained a subject of extensive research globally. Advancements in science and industry have resulted in a massive surge in the amount of industrial chemicals produced within the last few decades. Persistent and emerging organic pollutants are detected in aquatic environments, and conventional wastewater treatment plants have ineffectively handled these trace, bioaccumulative and toxic compounds. Therefore, we have conducted an extensive bibliometric analysis of different materials utilized to combat organic pollutants via adsorption and photocatalysis. The classes of pollutants, material synthesis, mechanisms of interaction, merits, and challenges were comprehensively discussed. The paper highlights the advantages of various materials used in the removal of hazardous pollutants from wastewater with activated carbon having the highest adsorption capacity. Dyes, pharmaceuticals, endocrine-disrupting chemicals, pesticides and other recalcitrant organic pollutants have been successfully removed at high degradation efficiencies through the photocatalytic process. The photocatalytic degradation and adsorption processes were compared by considering factors such as cost, efficiency, ease of application and reusability. This review will be good resource material for water treatment professionals/scientists, who may be interested in adsorptive and photocatalytic remediation of organic chemicals pollutants.

Glass Foam from Flat Glass Waste Produced by the Microwave Irradiation Technique

A glass foam with good thermal insulation characteristics (apparent density of 0.38 g/cm3, porosity of 81.9% and thermal conductivity of 0.089 W/m·K), high compressive strength (3.9 MPa) and a satisfactory microstructural homogeneity with pore size between 0.6–1.0 mm was obtained by sintering at 927 °C of flat glass waste, a glass waste usually not used in the manufacture of glass foam. The manufacturing recipe has been improved by the simultaneous use of two microwave susceptible foaming agents (SiC and Si3N4) and the addition of coal fly ash and an oxygen-supplying agent (MnO2). The originality of the work was the simultaneous use of the two foaming agents and also the application of the technique of predominantly direct microwave heating, compared to the conventional heating methods commonly used in the manufacture of glass foam. The remarkable energy efficiency of the microwave heating technique led to high average heating rates without affecting the structural homogeneity and very low specific energy consumption.

C-Heterogenized Re Nanoparticles as Effective Catalysts for the Reduction of 4-Nitrophenol and Oxidation of 1-Phenylethanol

Rhenium nanoparticles (Re NPs) supported on Norit (activated carbon—C) and graphene (G) were prepared by a solvothermal method under microwave irradiation (MW). The synthesised heterogeneous catalysts were characterised and tested as reduction and oxidation catalysts, highlighting their dual catalytic behaviour. In the first case, they were used, for the first time, to reduce 4-nitrophenol, in aqueous medium, under MW irradiation. Re catalysts were easily recovered by centrifugation and recycled up to six times without significant activity loss. However, the same Re catalysts in MW-assisted oxidation of 1-phenylethanol with no added solvent experienced a significant loss of activity when recycled. The higher activity of the rhenium nanoparticles supported on graphene (Re/G) catalyst in both reactions was assigned to the higher dispersion and smaller particle size of Re NPs when graphene is the support.

Rapid, Energy-Efficient and Pseudomorphic Microwave-Induced-Metal-Plasma (MIMP) Synthesis of Mg2Si and Mg2Ge

Polycrystalline magnesium silicide, Mg2Si and magnesium germanide, Mg2Ge were synthesised from the elemental powders via the microwave-induced-metal-plasma (MIMP) approach at 200 W within 1 min in vacuo for the first...

Structural and Spectroscopic Effects of Li+ Substitution for Na+ in LixNa1-xCaGd0.5Ho0.05Yb0.45(MoO4)3 Scheelite-Type Upconversion Phosphors

A set of new triple molybdates, Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45, was successfully manufactured by the microwave-accompanied sol–gel-based process (MAS). Yellow molybdate phosphors Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45 with variation of the Li_xNa_1-x (x = 0, 0.05, 0.1, 0.2, 0.3) ratio under constant doping amounts of Ho³⁺ = 0.05 and Yb³⁺ = 0.45 were obtained, and the effect of Li⁺ on their spectroscopic features was investigated. The crystal structures of Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45 (x = 0, 0.05, 0.1, 0.2, 0.3) at room temperature were determined in space group I4₁/a by Rietveld analysis. Pure NaCaGd_0.5Ho_0.05Yb_0.45(MoO₄)₃ has a scheelite-type structure with cell parameters a = 5.2077 (2) and c = 11.3657 (5) Å, V = 308.24 (3) ų, Z = 4. In Li-doped samples, big cation sites are occupied by a mixture of (Li,Na,Gd,Ho,Yb) ions, and this provides a linear cell volume decrease with increasing Li doping level. The evaluated upconversion (UC) behavior and Raman spectroscopic results of the phosphors are discussed in detail. Under excitation at 980 nm, the phosphors provide yellow color emission based on the ⁵S₂/⁵F₄ → ⁵I₈ green emission and the ⁵F₅ → ⁵I₈ red emission. The incorporated Li⁺ ions gave rise to local symmetry distortion (LSD) around the cations in the substituted crystalline structure by the Ho³⁺ and Yb³⁺ ions, and they further affected the UC transition probabilities in triple molybdates Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45. The complex UC intensity dependence on the Li content is explained by the specificity of unit cell distortion in a disordered large ion system within the scheelite crystal structure. The Raman spectra of Li_xNa_1-xCaGd_0.5(MoO₄)₃ doped with Ho³⁺ and Yb³⁺ ions were totally superimposed with the luminescence signal of Ho³⁺ ions in the range of Mo–O stretching vibrations, and increasing the Li⁺ content resulted in a change in the Ho³⁺ multiplet intensity. The individual chromaticity points (ICP) for the LiNaCaGd(MoO₄)₃:Ho³⁺,Yb³⁺ phosphors correspond to the equal-energy point in the standard CIE (Commission Internationale de L’Eclairage) coordinates.

Advances in Microwave Synthesis of Nanoporous Materials

Usually, porous materials are synthesized by using conventional electric heating, which can be energy- and time-consuming. Microwave heating is commonly used in many households to quickly heat food. Microwave ovens can also be used as powerful devices in the synthesis of various porous materials. The microwave-assisted synthesis offers a simple, fast, efficient, and economic way to obtain many of the advanced nanomaterials. This review summarizes the recent achievements in the microwave-assisted synthesis of diverse groups of nanoporous materials including silicas, carbons, metal-organic frameworks, and metal oxides. Microwave-assisted methods afford highly porous materials with high specific surface areas (SSAs), e.g., activated carbons with SSA ≈3100 m² g^-1 , metal-organic frameworks with SSA ≈4200 m² g^-1 , covalent organic frameworks with SSA ≈2900 m² g^-1 , and metal oxides with relatively small SSA ≈300 m² g^-1 . These methods are also successfully implemented for the preparation of ordered mesoporous silicas and carbons as well as spherically shaped nanomaterials. Most of the nanoporous materials obtained under microwave irradiation show potential applications in gas adsorption, water treatment, catalysis, energy storage, and drug delivery, among others.

Microwave-Enabled Size Control of Iron Oxide Nanoparticles on Reduced Graphene Oxide

Nanoparticle-functionalized 2D material networks are promising for a wide range of applications, but in situ formation of nanoparticles is commonly challenged by rapid growth. Here, we demonstrate controlled synthesis of small and dispersed iron oxide nanoparticles on reduced graphene oxide (rGO) networks through rapid localized heating with microwaves with low-cost iron nitrate as the precursor. The strong coupling of the microwave radiation with the rGO network rapidly heats the network locally to decompose the iron nitrate and generate iron oxide nanoparticles, while cessation of microwaves leads to rapid cooling to minimize crystal growth. Small changes in the microwave reaction time (<1 min) led to very large changes in the iron oxide morphology. The solid-state microwave syntheses produced narrower nanoparticle size distribution than conventional heating. These results illustrate the potential of solid-state microwave syntheses to control the nanoparticle size on 2D materials through rapid localized heating under the microwave process conditions, which should be extendable to a variety of transition metal oxide-rGO systems.

Microwave Synthetic Routes for Shape-Controlled Catalyst Nanoparticles and Nanocomposites

The use of microwave irradiation for the synthesis of inorganic nanomaterials has recently become a widespread area of research that continues to expand in scope and specialization. The growing demand for nanoscale materials with composition and morphology tailored to specific applications requires the development of facile, repeatable, and scalable synthetic routes that offer a high degree of control over the reaction environment. Microwave irradiation provides unique advantages for developing such routes through its direct interaction with active reaction species, which promotes homogeneous heat distribution, increased reaction rates, greater product quality and yield, and use of mild reaction conditions. Many catalytic nanomaterials such as noble metal nanoparticles and intricate nanocomposites have very limited synthetic routes due to their extreme temperature sensitivity and difficulty achieving homogeneous growth. This work presents recent advances in the use of MW irradiation methods to produce high-quality nanoscale composites with controlled size, morphology, and architecture.

High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water

Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap and without toxic chemicals. The synthesis can be upscaled easily to the kg range with appropriate sintering equipment. Finally, NbO2F and Nb3O7F prepared by spark plasma sintering show significant photoelectrocatalytic (PEC) oxygen evolution from water in terms of photocurrent density and incident photon-to-current efficiency (% IPCE), whereas NbO2F and Nb3O7F prepared by conventional high temperature chemistry show little to no PEC response. Our study is a proof of concept for the quick, clean and energy saving production of valuable photocatalysts from plastic waste.

Microwave-Assisted Preparation of Luminescent Inorganic Materials: A Fast Route to Light Conversion and Storage Phosphors

Luminescent inorganic materials are used in several technological applications such as light-emitting displays, white LEDs for illumination, bioimaging, and photodynamic therapy. Usually, inorganic phosphors (e.g., complex oxides, silicates) need high temperatures and, in some cases, specific atmospheres to be formed or to obtain a homogeneous composition. Low ionic diffusion and high melting points of the precursors lead to long processing times in these solid-state syntheses with a cost in energy consumption when conventional heating methods are applied. Microwave-assisted synthesis relies on selective, volumetric heating attributed to the electromagnetic radiation interaction with the matter. The microwave heating allows for rapid heating rates and small temperature gradients yielding homogeneous, well-formed materials swiftly. Luminescent inorganic materials can benefit significantly from the microwave-assisted synthesis for high homogeneity, diverse morphology, and rapid screening of different compositions. The rapid screening allows for fast material investigation, whereas the benefits of enhanced homogeneity include improvement in the optical properties such as quantum yields and storage capacity.

Experimental Investigation on the Mass Diffusion Behaviors of Calcium Oxide and Carbon in the Solid-State Synthesis of Calcium Carbide by Microwave Heating

Microwave (MW) heating was proven to efficiently solid-synthesize calcium carbide at 1750 °C, which was about 400 °C lower than electric heating. This study focused on the investigation of the diffusion behaviors of graphite and calcium oxide during the solid-state synthesis of calcium carbide by microwave heating and compared them with these heated by the conventional method. The phase compositions and morphologies of CaO and C pellets before and after heating were carefully characterized by inductively coupled plasma spectrograph (ICP), thermo gravimetric (TG) analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The experimental results showed that in both thermal fields, Ca and C inter-diffused at a lower temperature, but at a higher temperature, the formed calcium carbide crystals would have a negative effect on Ca diffusion to carbon. The significant enhancement of MW heating on carbon diffusion, thus on the more efficient synthesis of calcium carbide, manifested that MW heating would be a promising way for calcium carbide production, and that a sufficient enough carbon material, instead of CaO, was beneficial for calcium carbide formation in MW reactors.