Biohybrid Polymer Capsules

Tailored Polymersomes for Enhanced Oral Drug Delivery: pH-Sensitive Systems for Intestinal Delivery of Immunosuppressants

Ensuring precise drug release at target sites is crucial for effective treatment. Here, pH-responsive nanoparticles for oral administration of mycophenolate mofetil, an alternative therapy for patients with inflammatory bowel disease unresponsive to conventional treatments is developed. However, its oral administration presents challenges due to its low solubility in the small intestine and high solubility and absorption in the stomach. Therefore, this aim is to design a drug delivery system capable of maintaining drug solubility compared to the free drug while delaying absorption from the stomach to the intestine. Successful synthesis and assembly of a block copolymer incorporating a pH-responsive functional group is achieved. Dynamic light scattering indicated a significant change in hydrodynamic size when the pH exceeded 6.5, confirming successful incorporation of the pH-responsive group. Encapsulation and controlled release of mycophenolate mofetil are efficiently demonstrated, with 90% release observed at intestinal pH. In vitro cell culture studies confirmed biocompatibility, showing no toxicity or adverse effects on Caco-2 cells. In vivo oral rat studies indicated reduced drug absorption in the stomach and enhanced absorption in the small intestine with the developed formulation. This research presents a promising drug delivery system with potential applications in the treatment of inflammatory bowel disease.

Phosphorus-carrying cascade molecules: inner architecture to biomedical applications

Cascade molecules are nearly uniform-sized macromolecules of small molecules or linear polymer cores built around symmetric branching units. A wide range of biological properties can be achieved with phosphorus-containing dendrimers, depending on their terminal functions, ranging from biomaterials to imaging, drug delivery, and acting as a drug by themselves. This feature article presents significant examples of phosphorus-containing dendrimers used to develop biochips, support cell cultures, carry or deliver biomacromolecules and drugs, bioimaging, and combinational benefits. Because of the thermal stability, ferrocene function, and physical and chemical properties of phosphorus, dendrimers show greater rigidity, mobility, and strength. These dendrimers will be discussed as having a favorable effect on cell growths, especially on neuronal cells, as well as human immune cells like natural killer cells and monocytes, which have a crucial part in preventing cancerous and viral infections. Several phosphorus dendrimers are effective as drugs by themselves (drug per se) and show their activity against neurodegenerative diseases, cancer, inflammation, ocular hypertension, and transmissible spongiform encephalopathies (TSEs) in both in vivo and in vitro. The present review discusses the synthetic route, fabrications, and biomedical applications of phosphorus-containing dendrimers. The toxicity of these dendrimers was also reported.

One-Step Fabrication of Coconut-Like Capsules via Competitive Reactions at an All-Aqueous Interface for Enzyme Immobilization

A concept of interfacial competitive reaction between biomineralization and alginate gelation at an all-aqueous single-emulsion droplet interface to prepare robust coconut-like capsules (inner hard wall and outer soft wall) is developed. The concept is further applied for enzyme immobilization with high encapsulation efficiency, enzyme loading, mass transfer coefficient, and recyclability. The thickness and swelling properties of the shell are simply tunable by a competitive reaction. Our platform may open a green, facile, and efficient way to prepare organic-inorganic hybrid sustainable materials with tailored compositions and structures.

Well-Defined pH-Responsive Self-Assembled Block Copolymers for the Effective Codelivery of Doxorubicin and Antisense Oligonucleotide to Breast Cancer Cells

The worldwide steady increase in the number of cancer patients motivates the development of innovative drug delivery systems for combination therapy as an effective clinical modality for cancer treatment. Here, we explored a design concept based on poly(ethylene glycol)-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(2-hydroxyethyl methacrylate-formylbenzoic acid) [PEG-b-PDMAEMA-b-P(HEMA-FBA)] for the dual delivery of doxorubicin (DOX) and GTI2040 (an antisense oligonucleotide for ribonucleotide reductase inhibition) to MCF-7 breast cancer cells. PEG-b-PDMAEMA-b-PHEMA, the precursor copolymer, was prepared through chain extensions from a PEG-based macroinitiator via two consecutive atom transfer radical polymerization (ATRP) steps. Then, it was modified at the PHEMA block with 4-formylbenzoic acid (FBA) to install reactive aldehyde moieties. A pH-responsive polymer-drug conjugate (PDC) was obtained by conjugating DOX to the polymer structure via acid-labile imine linkages, and subsequently self-assembled in an aqueous solution to form DOX-loaded self-assembled nanoparticles (DOX-SAN) with a positively charged shell. DOX-SAN condensed readily with negatively charged GTI2040 to form GTI2040/DOX-SAN nanocomplexes. Gel-retardation assay confirmed the affinity between GTI2040 and DOX-SAN. The GTI2040/DOX-SAN nanocomplex at N/P ratio of 30 exhibited a volume-average hydrodynamic size of 136.4 nm and a zeta potential of 21.0 mV. The pH-sensitivity of DOX-SAN was confirmed by the DOX release study based on the significant cumulative DOX release at pH 5.5 relative to pH 7.4. Cellular uptake study demonstrated favorable accumulation of GTI2040/DOX-SAN inside MCF-7 cells compared with free GTI2040/DOX. In vitro cytotoxicity study indicated higher therapeutic efficacy of GTI2040/DOX-SAN relative to DOX-SAN alone because of the downregulation of the R2 protein of ribonucleotide reductase. These outcomes suggest that the self-assembled pH-responsive triblock copolymer is a promising platform for combination therapy, which may be more effective in combating cancer than individual therapies.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Insight into the mechanism and formation process of bioinspired poly(amino acid)/polyphenol capsules engineered with fast pH switchable permeability

Capsules have hollow cores and closed wall structures, and they have attracted considerable interest due to their wide applications and significance in life science. The engineering process of bioinspired capsules and related applications have earned heavy concerns. However, the mechanism of capsule formation is often ignored. Herein, based on polyornithine (POR) and tannic acid (TA), two facile strategies to engineer bioinspired capsules were proposed, and the formation mechanisms were deeply explored. We found that the oxidized state of TA had a profound influence not on the thickness or permeability of the formed capsule but on the mechanism and generation process. Compared to TA/POR capsules produced from TA without oxidization (TA/POR), capsules produced from TA with preoxidization (oTA/POR) had thicker shells with higher impermeability. The dominant construction mode in the shells of TA/POR capsules was electrostatic interactions but became Schiff base bonds in oTA/POR capsules. The permeability of oTA/POR displayed pH reversibility and strong pH dependence, with 100% permeability at lower pH and 100% impermeability at pH 7, completing loading/releasing kinetics in minutes at pH 4. We believe these findings contribute to knowledge of bioinspired capsules from engineering processes and formation mechanisms, extending their applications in various fields, such as in drug delivery, artificial cells, and sensors.

One-Shot Intrablock Cross-Linking of Linear Diblock Copolymer to Realize Janus-Shaped Single-Chain Nanoparticles

Developing an efficient and versatile process to transform a single linear polymer chain into a shape-defined nanoobject is a major challenge in the fields of chemistry and nanotechnology to replicate sophisticated biological functions of proteins and nucleic acids in a synthetic polymer system. In this study, we performed one-shot intrablock cross-linking of linear block copolymers (BCPs) to realize single-chain nanoparticles (SCNPs) with two chemically compartmentalized domains (Janus-shaped SCNPs). Detailed structural characterizations of the Janus-shaped SCNP composed of polystyrene-block-poly(glycolic acid) revealed its compactly folded conformation and compartmentalized block localization, similar to the self-folded tertiary structures of natural proteins. Versatility of the one-shot intrablock cross-linking was demonstrated using several different BCP precursors. In addition, the Janus-shaped SCNP produce miniscule microphase-separated structures.

pH-Responsive Capsules with a Fibril Scaffold Shell Assembled from an Amyloidogenic Peptide

Peptides and proteins have evolved to self-assemble into supramolecular entities through a set of non-covalent interactions. Such structures and materials provide the functional basis of life. Crucially, biomolecular assembly processes can be highly sensitive to and modulated by environmental conditions, including temperature, light, ionic strength and pH, providing the inspiration for the development of new classes of responsive functional materials based on peptide building blocks. Here, it is shown that the stimuli-responsive assembly of amyloidogenic peptide can be used as the basis of environmentally responsive microcapsules which exhibit release characteristics triggered by a change in pH. The microcapsules are biocompatible and biodegradable and may act as vehicles for controlled release of a wide range of biomolecules. Cryo-SEM images reveal the formation of a fibrillar network of the capsule interior with discrete compartments in which cargo molecules can be stored. In addition, the reversible formation of these microcapsules by modulating the solution pH is investigated and their potential application for the controlled release of encapsulated cargo molecules, including antibodies, is shown. These results suggest that the approach described here represents a promising venue for generating pH-responsive functional peptide-based materials for a wide range of potential applications for molecular encapsulation, storage, and release.

Self-immobilization of coacervate droplets by enzyme-mediated hydrogelation

An artificial protocell model mimicking stimuli-triggered extracellular matrix formation is demonstrated based on the self-immobilization of coacervate microdroplets. Endogenous enzyme activity within the microdroplets results in the release of Ca2+ ions that trigger hydrogelation throughout the external environment, which in turn mechanically supports and chemically stabilizes the protocells.

Stimuli-Responsive Proteinosomes Based on Biohybrid Shell Cross-Linked Micelles

A new method of stimuli-responsive proteinosome fabrication with the shell cross-linked micelle as a template is reported in this research. A thermoresponsive diblock copolymer poly[di(ethylene glycol) methyl ether methacrylate]-b-poly[poly(ethylene glycol) methyl ether methacrylate-co-pyridyl disulfide methacrylamide] [PDEGMA-b-P(PEGMA-co-PDSMA)] was synthesized and self-assembled into micelles with PDEGMA cores and P(PEGMA-co-PDSMA) shells at the temperature above its lower critical solution temperature (LCST). Reduced bovine serum albumin (BSA) molecules with six thiol groups were used to cross-link the shells of the micelles by reacting with the pendant pyridyl disulfide groups on the P(PEGMA-co-PDSMA) block. At a temperature below the LCST of the polymer, the PDEGMA cores were dissolved in water, affording proteinosomes with a size of about 50 nm and capsule-like structures. The proteinosome was also thermoresponsive with a phase transition temperature at 35 °C. The fabrication of the proteinosome had no obvious influence on the structure and activity of BSA, and BSA retained most of its secondary structure and esterase-like activity. Because the BSA molecules were connected to the polymer chains through disulfide bonds, they could be released upon addition of dithiothreitol. The in vitro cell viability evaluation and the cellular uptake assay demonstrated that the proteinosome showed low toxicity to NIH 3T3 and 4T1 cells and could be internalized into the 4T1 cells.

Intravitreal Polymeric Nanocarriers with Long Ocular Retention and Targeted Delivery to the Retina and Optic Nerve Head Region

Posterior eye tissues, such as retina, are affected in many serious eye diseases, but drug delivery to these targets is challenging due to various anatomical eye barriers. Intravitreal injections are widely used, but the intervals between invasive injections should be prolonged. We synthesized and characterized (¹H NMR, gel permeation chromatography) block copolymers of poly(ethylene glycol), poly(caprolactone), and trimethylene carbonate. These polymers self-assembled to polymersomes and polymeric micelles. The mean diameters of polymersomes and polymeric micelles, about 100 nm and 30–50 nm, respectively, were obtained with dynamic light scattering. Based on single particle tracking and asymmetric flow field-flow fractionation, the polymeric micelles and polymersomes were stable and diffusible in the vitreous. The materials did not show cellular toxicity in cultured human umbilical vein endothelial cells in the Alamar Blue Assay. Pharmacokinetics of the intravitreal nanocarriers in the rabbits were evaluated using in vivo fluorophotometry. The half-lives of the polymersomes (100 nm) and the micelles (30 nm) were 11.4–32.7 days and 4.3–9.5 days. The intravitreal clearance values were 1.7–8.7 µL/h and 3.6–5.4 µL/h for polymersomes and polymeric micelles, respectively. Apparent volumes of distribution of the particles in the rabbit vitreous were 0.6–1.3 mL for polymeric micelles and 1.9–3.4 mL for polymersomes. Polymersomes were found in the vitreous for at least 92 days post-dosing. Furthermore, fundus imaging revealed that the polymersomes accumulated near the optic nerve and retained there even at 111 days post-injection. Polymersomes represent a promising technology for controlled and site-specific drug delivery in the posterior eye segment.

Artificial Bioaugmentation of Biomacromolecules and Living Organisms for Biomedical Applications

The synergistic union of nanomaterials with biomaterials has revolutionized synthetic chemistry, enabling the creation of nanomaterial-based biohybrids with distinct properties for biomedical applications. This class of materials has drawn significant scientific interest from the perspective of functional extension via controllable coupling of synthetic and biomaterial components, resulting in enhancement of the chemical, physical, and biological properties of the obtained biohybrids. In this review, we highlight the forefront materials for the combination with biomacromolecules and living organisms and their advantageous properties as well as recent advances in the rational design and synthesis of artificial biohybrids. We further illustrate the incredible diversity of biomedical applications stemming from artificially bioaugmented characteristics of the nanomaterial-based biohybrids. Eventually, we aim to inspire scientists with the application horizons of the exciting field of synthetic augmented biohybrids.

An Adhesive Peptide from the C-Terminal Domain of α-Synuclein for Single-Layer Adsorption of Nanoparticles onto Substrates

The two-dimensional (2D) homogeneous assembly of nanoparticle monolayer arrays onto a broad range of substrates constitutes an important challenge for chemistry, nanotechnology, and material science. α-Synuclein (αS) is an intrinsically disordered protein associated with neuronal protein complexes and has a high degree of structural plasticity and chaperone activity. The C-terminal domain of αS has been linked to the noncovalent interactions of this protein with biological targets and the activity of αS in presynaptic connections. Herein, we have systematically studied peptide fragments of the chaperone-active C-terminal sequence of αS and identified a 17-residue peptide that preserves the versatile binding nature of αS. Attachment of this short peptide to gold nanoparticles afforded colloidally stable nanoparticle suspensions that allowed the homogeneous 2D adhesion of the conjugates onto a wide variety of surfaces, including the formation of crystalline nanoparticle superlattices. The peptide sequence and the strategy reported here describe a new adhesive molecule for the controlled monolayer adhesion of metal nanoparticles and sets a stepping-stone toward the potential application of the adhesive properties of αS.

Fluorous-Core Nanoparticle-Embedded Hydrogel Synthesized via Tandem Photo-Controlled Radical Polymerization: Facilitating the Separation of Perfluorinated Alkyl Substances from Water

Per- and polyfluorinated alkyl substances (PFASs) are broadly used as surfactants and water/oil repellents for many decades. However, they are toxic, environmental persistence, and widely detected in water sources. In this work, we developed a fluorous-core nanoparticle-embedded hydrogel (FCH) synthesized by the metal-free tandem photocontrolled radical polymerization under visible-light irradiation. With the FCH material, the scope of absorbable PFASs has been expanded to neutral, anionic, cationic and zwitterionic PFASs with the same adsorbent for the first time. The fluorous nanoparticles exhibited strong and selective affinity toward PFASs without being dramatically influenced by pH levels and background ions, enabling efficient removing of PFASs at high to environmentally relevant concentrations (10 mg/L to 1 μg/L). Furthermore, the FCH network has shown good mechanical performance, facilitating the separation, regeneration, and recycling of adsorbent for multiple runs. These results demonstrate the promise of the FCH material for PFASs separation and adsorbent recycling toward sustainable environment.

Modular Approach to the Functionalization of Polymersomes

Functionalizing polymersomes remains a challenge due to the limitation in reaction conditions applicable to the chemistry on the surface, hindering their application for selective targeting. In order to overcome this limitation, functionalization can be introduced right before the self-assembly. Here, we have synthesized a library (32 examples) of PEG-b-PS and PEG-b-PDLLA with various functional groups derived from the amine-functionalized polymers, leading to functionally active polymersomes. We show that polymersome formation is possible via the general method with all functionalized groups and that these handles are present on the surface and are able to undergo reactions. Additionally, this methodology provides a general synthetic tool to tailor the functional group of the polymersome right before self-assembly, without limitation on the reaction conditions.

Formation and Regulation of Multicompartment Vesicles from Cyclic Diblock Copolymer Solutions: A Simulation Study

The self-assembly of a cyclic AB copolymer system with relatively long A blocks and short B blocks in B-selective solvents is investigated using a simulated annealing method. By investigating the effect of the lengths and solubilities of A and B blocks (N A and N B, εAS and εBS), the incompatibility between A and B blocks (εAB), as well as the polymer concentration (C p) and the conditions for the formation of multicompartment vesicles in cyclic diblock copolymer solutions, is predicted. The phase diagrams in terms of N B, εAS, and C p are constructed. The mechanism of the morphological transition is elucidated. It is shown that for cyclic copolymers the change in the above factors relating to the polymer and solvent properties all can lead to the transition from simple vesicles to multicompartment vesicles, but two different transition mechanisms are revealed. In addition, our simulations demonstrate that the self-assembly of cyclic copolymers could provide a powerful strategy for regulating the compartment number and the wall thickness of the multicompartment vesicles by adjusting the block solubilities and block lengths, respectively. These findings will facilitate the application of multicompartment architectures in cell mimicry, drug delivery, and nanoreactors.

In Situ Study of Layer-by-Layer Polyelectrolyte Deposition in Nanopores of Anodic Aluminum Oxide by Reflectometric Interference Spectroscopy

The modification of cylindrical anodic aluminum oxide (AAO) nanopores by alternating layer-by-layer (LBL) deposition of poly(sodium-4-styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) was studied in situ by reflectometric interference spectroscopy (RIfS). In particular, the kinetics of polyelectrolyte deposition inside the pores with a diameter of 37 ± 3 nm and a length of 3.7 ± 0.3 μm were unraveled, and potential differences in the LBL multilayer growth compared to flat silicon substrates as well as the effect of different ionic strengths and different types of ions were investigated. RIfS measures the effective optical thicknesses, which is-for a constant pore length-proportional to the effective refractive index of the AAO sample, from which, in turn, the deposited mass of the polymer or the corresponding layer thickness can be estimated. Compared to the multilayer growth by the LBL deposition on the flat aminosilane-primed silicon wafers, which was assessed by spectroscopic ellipsometry, the thickness increment per deposited bilayer, as well as the dependence of this increment on the ionic strength (0.01-0.15) and the counterion type (Na⁺ vs Ca²⁺) inside the aminosilane-primed nanopores, was for the first bilayers to within the experimental error identical. For thicker multilayers, the pore diameter became smaller, which led to reduced thickness increments and eventually virtually completely filled the pores. The observed kinetics is consistent with the mass-transport-limited adsorption of the polyelectrolyte to the charged surface according to a Langmuir isotherm with a negligible desorption rate. In addition to fundamental insights into the buildup of polyelectrolyte multilayers inside the AAO nanopores, our results highlight the sensitivity of RIfS and its use as an analytical tool for probing processes inside the nanopores and for the development of biosensors.

Engineering the Orientation, Density, and Flexibility of Single-Domain Antibodies on Nanoparticles To Improve Cell Targeting

Nanoparticles targeted to specific cells have the potential to improve the delivery of therapeutics. The effectiveness of cell targeting can be significantly improved by optimizing how the targeting ligands are displayed on the nanoparticle surface. Crucial to optimizing the cell binding are the orientation, density, and flexibility of the targeting ligand on the nanoparticle surface. In this paper, we used an anti-EGFR single-domain antibody (sdAb or nanobody) to target fluorescent nanocrystals (Qdots) to epidermal growth factor receptor (EGFR)-positive cells. The sdAbs were expressed with a synthetic amino acid (azPhe), enabling site-specific conjugation to Qdots in an improved orientation. To optimize the targeting efficiency, we engineered the point of attachment (orientation), controlled the density of targeting groups on the surface of the Qdot, and optimized the length of the poly(ethylene glycol) linker used to couple the sdAb to the Qdot surface. By optimizing orientation, density, and flexibility, we improved cell targeting by more than an order of magnitude. This work highlights the importance of understanding the structure of the nanoparticle surface to achieve the optimal interactions with the intended receptors and how engineering the nanoparticle surface can significantly improve cell targeting.

Fabrication and application of complex microcapsules: a review

The development of new functional materials requires cutting-edge technologies for incorporating different functional materials without reducing their functionality. Microencapsulation is a method to encapsulate different functional materials at nano- and micro-scales, which can provide the necessary protection for the encapsulated materials. In this review, microencapsulation is categorized into chemical, physical, physico-chemical and microfluidic methods. The focus of this review is to describe these four categories in detail by elaborating their various microencapsulation methods and mechanisms. This review further discusses the key features and potential applications of each method. Through this review, the readers could be aware of many aspects of this field from the fabrication processes, to the main properties, and to the applications of microcapsules.

One-pot synthesis of oligonucleotide-grafted polymeric nanoparticles

A feasible one-pot approach for constructing oligonucleotide-grafted polymeric nanoparticles is reported. The approach involves formation of mesoglobules from a thermoresponsive polymer, coating of the mesoglobules with a cross-linked polymeric shell, and grafting the latter with oligonucleotide strands. Dynamic and static light scattering are used to parameterize the novel constructs. They are relatively large structures with hydrodynamic radii and molar masses reaching 200 nm and 150.0 × 10⁶ g mol^-1, respectively. The oligonucleotide-grafted polymeric nanoparticles are of spherical morphology and moderately negative (-12.4 to -19.1 mV) ζ potential as revealed by AFM, TEM, and electrophoretic light scattering. In accordance with their large size, they are found to carry thousands of oligonucleotide strands per particle. The novel constructs are thermoresponsive. They undergo reversible collapse upon heating and swelling upon cooling, which is associated with changes in the grafting density and, hence, the conformation of the oligonucleotide strands from unextended at room temperature to a more extended one at elevated temperatures. The versatility of the approach is demonstrated by varying the type of the cross-linked shell and content of the oligonucleotide strands and, hence, the grafting density. Appropriate diversification and modifications are suggested as well.

Folded amphiphilic homopolymer micelles in water: uniform self-assembly beyond amphiphilic random copolymers

Herein, we developed precision self-assembly systems of amphiphilic homopolymers into folded micelles in water.

Enzyme-mediated reversible deactivation radical polymerization for functional materials: principles, synthesis, and applications

Enzymes provide a potential and highly efficient way to mediate the formation of various functional polymer materials with wide applications.

Deciphering and Controlling Structural and Functional Parameters of the Shells in Vesicle-Templated Polymer Nanocapsules

Vesicle-templated nanocapsules are prepared by polymerization of hydrophobic acrylic monomers and cross-linkers in the hydrophobic interior of self-assembled bilayers. Understanding the mechanism of capsule formation and the influence of synthetic parameters on the structural features and functional performance of nanocapsules is critical for the rational design of functional nanodevices, an emerging trend of application of the nanocapsule platform. This study investigated the relationship between basic parameters of the formulation and synthesis of nanocapsules and structural and functional characteristics of the resulting structures. Variations in the monomer/surfactant ratio, temperature of polymerization, and the molar fraction of the free-radical initiators were investigated with a multipronged approach, including shell thickness measurements using small-angle neutron scattering, evaluation of the structural integrity of nanocapsules with scanning electron microscopy, and determination of the retention of entrapped molecules using absorbance and fluorescence spectroscopy. Surprisingly, the thickness of the shells did not correlate with the monomer/surfactant ratio, supporting the hypothesis of substantial stabilization of the surfactant bilayer with loaded monomers. Decreasing the temperature of polymerization had no effect on the spherical structure of nanocapsules but resulted in progressively lower retention of entrapped molecules, suggesting that a spherical skeleton of nanocapsule forms rapidly, followed by filling the gaps to create the structure without pinholes. Lower content of initiators resulted in slower reactions, outlining the baseline conditions for practical synthetic protocols. Taken together, these findings provide insights into the formation of nanocapsules and offer methods for controlling the properties of nanocapsules in viable synthetic methods.

Ferrocene-Containing Polymer via the Biginelli Reaction for In Vivo Treatment of Oxidative Stress Damage

Small molecule antioxidants have little impact on oxidative stress in vivo because of their poor bioavailability. To explore an antioxidant for in vivo applications, a polymeric antioxidant containing a ferrocene moiety was developed. The ferrocene-containing monomer was synthesized through the robust tricomponent Biginelli reaction with a high yield. The corresponding water-soluble copolymer was conveniently prepared via radical polymerization. Both the ferrocene moiety and the Biginelli structure (dihydropyrimidin-2(H)-one) contributed to the remarkable radical scavenging ability of this highly biocompatible copolymer. It was more efficient than traditional small molecule antioxidants at protecting cells against fatal oxidative stress. This copolymer also showed clear therapeutic activity in counteracting oxidation-induced acute liver damage in a live mouse model. Our study into functional organometallic polymers resulted in a promising polymeric biomaterial that may find therapeutic applications and have important implications in the fields of organic chemistry and polymer chemistry.

Orthogonal Folding of Amphiphilic/Fluorous Random Block Copolymers for Double and Multicompartment Micelles in Water

Here, we report orthogonal folding and self-assembly systems of amphiphilic/fluorous random block copolymers for double core and multicompartment micelles in water. For this, we developed the precision folding techniques of polymer chains via the selective self-assembly of the pendant groups. Typically, A/C-B/C random block copolymers were designed: Hydrophobic dodecyl groups (A) and fluorous fluorinated octyl groups (B) were introduced into the respective blocks, while hydrophilic poly(ethylene glycol) chains (C) were randomly incorporated into all the segments. By controlling the chain length and composition of the respective blocks, the copolymers induce orthogonal single-chain folding in water to form double-compartment micelles comprising hydrophobic and fluorous cores. The copolymers were site-selectively folded in a fluoroalcohol to result in tadpole unimer micelles comprising a hydrophobic A/C unimer micelle and an unfolded fluorous B/C chain. Additionally, asymmetric A/C-B/C random block copolymers with short and highly hydrophobic or fluorous segments were effective for multicompartment micelles in water.

Pointing in the Right Direction: Controlling the Orientation of Proteins on Nanoparticles Improves Targeting Efficiency

Protein-conjugated nanoparticles have the potential to precisely deliver therapeutics to target sites in the body by specifically binding to cell surface receptors. To maximize targeting efficiency, the three-dimensional presentation of ligands toward these receptors is crucial. Herein, we demonstrate significantly enhanced targeting of nanoparticles to cancer cells by controlling the protein orientation on the nanoparticle surface. To engineer the point of attachment, we used amber codon reassignment to incorporate a synthetic amino acid, p-azidophenylalanine (azPhe), at specific locations within a single domain antibody (sdAb or nanobody) that recognizes the human epidermal growth factor receptor (EGFR). The azPhe modified sdAb can be tethered to the nanoparticle in a specific orientation using a bioorthogonal click reaction with a strained cyclooctyne. The crystal structure of the sdAb bound to EGFR was used to rationally select sites likely to optimally display the sdAb upon conjugation to a fluorescent nanocrystal (Qdot). Qdots with sdAb attached at the azPhe13 position showed 6 times greater binding affinity to EGFR expressing A549 cells, compared to Qdots with conventionally (succinimidyl ester) conjugated sdAb. As ligand-targeted delivery systems move toward clinical application, this work shows that nanoparticle targeting can be optimized by engineering the site of protein conjugation.

Nanocarriers and Their Loading Strategies

Nanocarriers are of paramount significance for drug delivery and nanomedicine technology. Given the imperfect systems and nonideal therapeutic effects, there are works to be done in synthesis as much as in biological studies, if not more so. Building the foundation of synthesis would offer more tools and deeper insights for exploring the biological systems with extreme complexity. This review aims at a broad-scope summary and classification of nanocarriers for drug delivery, with focus on the synthetic strategy and structural implications. The nanocarriers are divided into four categories according to the loading principle: molecular-level loading, surface loading, matrix loading, and cavity loading systems. Making comparisons across diverse nanocarrier systems would make it easier to see the fundamental characteristics, from where the weakness can be addressed and the strengths combined. The systematic comparisons may also inspire new ideas and methods.

Uricase-containing coacervate microdroplets as enzyme active membrane-free protocells for detoxification of uric acid in serum

Based on the unique property of preferential sequestration of guest molecules, coacervate microdroplets are proposed as enzyme active membrane-free protocells, in which uricase is loaded for efficient detoxification of uric acid in serum.

pH-Induced Transformation of Biodegradable Multilamellar Nanovectors for Enhanced Tumor Penetration

Herein we describe biodegradable nanovectors comprised of block copolymers of poly(ethylene glycol) and poly(trimethylene carbonate) (PEG–PTMC) that change their morphology and surface charge when exposed to tumor environment conditions. Well-defined, drug-loaded nanovectors were prepared via direct hydration using liquid oligo(ethylene glycol) as a dispersant. Systematic introduction of basic imidazole-functional TMC derivatives, through modular polymerization, resulted in polymers that self-assembled in multilamellar nanoparticles (at neutral pH) and that were loaded with hydrophobic drugs. The resultant multilamellar nanovectors demonstrated a significant size reduction and charge reversal at pH ≈ 6.5, which yielded cationic nanovectors that were tailored for tumor penetration. Invitro studies using 3D heterospheroids demonstrate that this platform has excellent potential to promote enhanced tumor penetration under physiological conditions.

Redox-Responsive Core-Cross-Linked Block Copolymer Micelles for Overcoming Multidrug Resistance in Cancer Cells

Success of chemotherapy as a treatment for cancer has been often inhibited by multidrug resistance (MDR) of the cancer cells. There is a clear need to generate strategies to overcome this resistance. In this work, we have developed redox-responsive and core-cross-linked micellar nanocarriers using poly(ethylene glycol)-block-poly(2-(methacryloyloxy)ethyl 5-(1,2-dithiolan-3-yl)pentanoate) diblock copolymers (PEG-b-PLAHEMA) with tunable swelling properties for the delivery of drugs toward drug-sensitive MDA-MB-231 and drug-resistant MDA-MB-231 (231R) cancer cells. PEG-b-PLAHEMA containing varying number of 2-(methacryloyloxy)ethyl 5-(1,2-dithiolan-3-yl)pentanoate (LAHEMA) units were synthesized by employing the reversible addition-fragmentation chain transfer polymerization technique. The block copolymer self-assembly, cross-linking induced by reduction, and de-cross-linking triggered time-dependent controlled swelling of micelles were studied using dynamic light scattering, fluorescence spectroscopy, and transmission electron microscopy. In vitro cytotoxicity, cellular uptake efficiency, and glutathione-responsive anticancer activity of doxorubicin (DOX) encapsulated in core-cross-linked block copolymer micelles (CCMs) toward both drug-sensitive and drug-resistant cancer cell lines were evaluated. Significant reduction in IC₅₀ was observed by DOX-loaded CCMs toward drug-resistant 231R cancer cell lines, which was further improved by coencapsulating DOX and verapamil (a P-glycoprotein inhibitor) in CCMs. Thus, these reduction-sensitive biocompatible CCMs with tunable swelling property are very promising in overcoming MDR in cancer cells.

Vesicles in Multiple Shapes: Fine-Tuning Polymersomes' Shape and Stability by Setting Membrane Hydrophobicity

Amphiphilic block-copolymers are known to self-assemble into micelles and vesicles. In this paper, we discuss the multiple options between and beyond these boundaries using amphiphilic AB diblock and ABC triblock copolymers. We adjust the final structure reached by the composition of the mixture, by the preparation temperature, and by varying the time-scale of formation. This leads to the formation of vesicles and micelles, but also internal micelles in larger sheets, lamellar vesicles, and closed tubes, thus broadening the amount of self-assembly structures available and deepening our understanding of them.

Stability of polymersomes with focus on their use as nanoreactors

The increased membrane stability of polymersomes compared to their liposomal counterparts is one of their most important advantages. Due to this benefit, polymer vesicles are intended to be used not only as carrier systems for drug delivery purposes but also as nanoreactors for biotechnological applications. Within this work, the stability of polymersomes made of the triblock copolymer poly(2-methyloxazoline)₁₅-poly(dimethylsiloxane)₆₈-poly(2-methyloxazoline)₁₅ (PMOXA₁₅-PDMS₆₈-PMOXA₁₅) toward mechanical stress, typically prevailing in stirred-tank reactors being the most often used reactor type in the biotechnological industry, was characterized. Dynamic light scattering and turbidity measurements showed that stirrer rotation causing a maximum local energy dissipation of up to 1.23 W/kg^-1 did not result in any loss of vesicle quality or quantity. Nevertheless, most probably due to local membrane defects, 6.6% release of the previously encapsulated model dye calcein was recognized at 25°C within 48 h. Moreover, increased temperature, leading to decreased membrane viscosity and increased membrane fluidity, respectively, led to a higher molecule leakage. Besides, the stability of polymersomes in two-phase systems was investigated. Although alkanes and ionic liquids were shown not to lead to complete vesicle damage, no efficient calcein retention was achieved in either case.

Efficient Way to Generate Protein-Based Nanoparticles by in-Situ Photoinitiated Polymerization-Induced Self-Assembly

Protein-based nanoparticles with tailored properties by using different functional proteins as building blocks have many actual and potential applications in biomedicine, biotechnology, and nanotechnology. In this study, we demonstrated a facile and efficient way to synthesize protein-based nanoparticles by taking advantage of photoinitiated reversible addition-fragmentation chain transfer (RAFT) polymerization-induced self-assembly by using multi-RAFT modified bovine serum albumin (BSA) as a macro-RAFT agent. The growth of the PHPMA chains results in the increase of the hydrophobicity of the star BSA-PHPMA conjugates, and when reaching the critical aggregation concentration in aqueous solution, they will aggregate into nanoparticles via the hydrophobic interaction of PHPMA. The generated nanoparticles also showed excellent encapsulation ability toward both hydrophobic and hydrophilic components, and as a proof of concept, after loading cancer drug DOX or biomacromolecule DNA, the protease-mediated release of the encapsulants was demonstrated. It is anticipated that the described method may open up new opportunities for designing a variety of protein-polymer self-assembled nanostructures tailored to specific applications.