Hybrid Biofuel Cell: Microbial Fuel Cell with an Enzymatic Air-Breathing Cathode

Enzymatic and Microbial Electrochemistry: Approaches and Methods

The coupling of enzymes and/or intact bacteria with electrodes has been vastly investigated due to the wide range of existing applications. These span from biomedical and biosensing to energy production purposes and bioelectrosynthesis, whether for theoretical research or pure applied industrial processes. Both enzymes and bacteria offer a potential biotechnological alternative to noble/rare metal-dependent catalytic processes. However, when developing these biohybrid electrochemical systems, it is of the utmost importance to investigate how the approaches utilized to couple biocatalysts and electrodes influence the resulting bioelectrocatalytic response. Accordingly, this tutorial review starts by recalling some basic principles and applications of bioelectrochemistry, presenting the electrode and/or biocatalyst modifications that facilitate the interaction between the biotic and abiotic components of bioelectrochemical systems. Focus is then directed toward the methods used to evaluate the effectiveness of enzyme/bacteria-electrode interaction and the insights that they provide. The basic concepts of electrochemical methods widely employed in enzymatic and microbial electrochemistry, such as amperometry and voltammetry, are initially presented to later focus on various complementary methods such as spectroelectrochemistry, fluorescence spectroscopy and microscopy, and surface analytical/characterization techniques such as quartz crystal microbalance and atomic force microscopy. The tutorial review is thus aimed at students and graduate students approaching the field of enzymatic and microbial electrochemistry, while also providing a critical and up-to-date reference for senior researchers working in the field.

Engineering Self-Powered Electrochemical Sensors Using Analyzed Liquid Sample as the Sole Energy Source

Many healthcare and environmental monitoring devices use electrochemical techniques to detect and quantify analytes. With sensors progressively becoming smaller-particularly in point-of-care (POC) devices and wearable platforms-it creates the opportunity to operate them using less energy than their predecessors. In fact, they may require so little power that can be extracted from the analyzed fluids themselves, for example, blood or sweat in case of physiological sensors and sources like river water in the case of environmental monitoring. Self-powered electrochemical sensors (SPES) can generate a response by utilizing the available chemical species in the analyzed liquid sample. Though SPESs generate relatively low power, capable devices can be engineered by combining suitable reactions, miniaturized cell designs, and effective sensing approaches for deciphering analyte information. This review details various such sensing and engineering approaches adopted in different categories of SPES systems that solely use the power available in liquid sample for their operation. Specifically, the categories discussed in this review cover enzyme-based systems, battery-based systems, and ion-selective electrode-based systems. The review details the benefits and drawbacks with these approaches, as well as prospects of and challenges to accomplishing them.

Insight into the performance discrepancy of GAC and CAC as air-cathode materials in constructed wetland-microbial fuel cell system

Constructed wetland-microbial fuel cell (CW-MFC) has exhibited the performance discrepancy between using granular activated carbon (GAC) and columnar activated carbon (CAC) as air-cathode materials. No doubt, this is linked with electrochemical performance and decontaminants characteristics in the CW-MFC system. To provide insight into this performance discrepancy, three CW-MFCs were designed with different carbon-material to construct varied shapes of air-cathodes. The results showed that the ring-shaped cathode filled with GAC yielded a highest voltage of 458 mV with maximum power density of 13.71 mW m^-2 and >90% COD removal in the CW-MFC system. The electrochemical characteristics and the electron transport system activity (ETSA) are the driven force to bring the GAC a better electron transportation and oxygen reduction reaction (ORR). This will help elucidating underlying mechanisms of different activated carbon for air-cathode and thus promote its large application.

Ethanol Biofuel Cells: Hybrid Catalytic Cascades as a Tool for Biosensor Devices

Biofuel cells use chemical reactions and biological catalysts (enzymes or microorganisms) to produce electrical energy, providing clean and renewable energy. Enzymatic biofuel cells (EBFCs) have promising characteristics and potential applications as an alternative energy source for low-power electronic devices. Over the last decade, researchers have focused on enhancing the electrocatalytic activity of biosystems and on increasing energy generation and electronic conductivity. Self-powered biosensors can use EBFCs while eliminating the need for an external power source. This review details improvements in EBFC and catalyst arrangements that will help to achieve complete substrate oxidation and to increase the number of collected electrons. It also describes how analytical techniques can be employed to follow the intermediates between the enzymes within the enzymatic cascade. We aim to demonstrate how a high-performance self-powered sensor design based on EBFCs developed for ethanol detection can be adapted and implemented in power devices for biosensing applications.

Bilirubin oxidase oriented on novel type three-dimensional biocathodes with reduced graphene aggregation for biocathode

Aggregation of reduced graphene oxide (RGO) due to π-π stacking is a recurrent problem in graphene-based electrochemistry, decreasing the effective working area and therefore the performance of the RGO electrodes. Dispersing RGO on three-dimensional (3D) carbon paper electrodes is one strategy towards overcoming this challenge, with partial relief aggregation. In this report, we describe the grafting of negatively charged 4-aminobenzoic acid (4-ABA) onto a graphene functionalized carbon paper electrode surface. 4-ABA functionalization induces separation of the RGO layers, at the same time leading to favorable orientation of the blue multi-copper enzyme Myrothecium verrucaria bilirubin oxidase (MvBOD) for direct electron transfer (DET) in the dioxygen reduction reaction (ORR) at neutral pH. Simultaneous electroreduction of graphene oxide to RGO and covalent attachment of 4-ABA are achieved by applying alternating cathodic and anodic electrochemical potential pulses, leading to a high catalytic current density (Δj_cat:193 ± 4 μA cm^-2) under static conditions. Electrochemically grafted 4-ABA not only leads to a favorable orientation of BOD as validated by fitting a kinetic model to the electrocatalytic data, but also acts to alleviate RGO aggregation as disclosed by scanning electron microscopy, most likely due to the electrostatic repulsion between 4-ABA-grafted graphene layers. With a half-lifetime of 55 h, the bioelectrode also shows the highest operational stability for DET-type MvBOD-based bioelectrodes reported to date. The bioelectrode was finally shown to work well as a biocathode of a membrane-less glucose/O₂ enzymatic biofuel cell with a maximum power density of 22 μW cm^-2 and an open circuit voltage of 0.51 V.

A single-liquid miniature biofuel cell with boosting power density via gas diffusion bioelectrodes

The low solubility of gas molecules in aqueous solutions has limited the power density output of enzymatic biofuel cells. Herein, a single-liquid miniature glucose-O2 fuel cell was constructed by using gas diffusion electrodes, which were prepared by immobilizing glucose oxidase (GOx) or laccase (Lac) modified on a porous structured carbon paper (CP). Due to the fast and direct O2 diffusion from air to the active sites of the immobilized enzyme through the pores of the CP anode/cathode with controlled wettability, the maximum power output densities dramatically increased to 9.64 μW cm-2 at 0.43 V and 53.0 μW cm-2 at 0.45 V for the cell in 5 mM glucose and after exposing the cell to air or O2 atmosphere, respectively. Interestingly, the resulting single-liquid cell could harvest power from human serum operating at a maximum power density of 49.0 μW cm-2 at 0.2 V. The biofuel cell fabricated by the gas diffusion electrodes displayed advantages such as high output power density, low cost and high 'on-chip' integrability and miniaturization, which suggest its great potential for implantable self-powered sensors and for many future applications.

A Lactate/Oxygen Biofuel Cell: The Coupled Lactate Oxidase Anode and PGM-Free Fe-N-C Cathode

The rapid development of both wearable and implantable biofuel cells has triggered more and more attention on the lactate biofuel cell. The novel lactate/oxygen biofuel cell (L/O-BFC) with the direct electron transfer (DET)-type lactate oxidase (LOx) anode and the platinum group metal (PGM)-free Fe-N-C cathode is designed and constructed in this paper. In such a reasonable design, the surface-controlled direct two-electron electrochemical reaction of the lactate oxidase was determined by cyclic voltammetry (CV) on the carbon nanotube (CNT) modified electrode with favorable high electrochemical active surface area and electronic conductivity. Additionally, the biosensor based on DET-type LOx modified electrode impressively presented linear response to lactate with different concentrations from 0.000 mM to 12.300 mM. In particular, the apparent Michealis-constant (K_M^app) calculated as 0.140 mM clearly indicates that LOx on CNT has strong affinity to the substrate lactate. Meanwhile, 4e^- transfer oxygen reduction reaction (ORR) was proven to take place on the Fe-N-C catalysts inthe 0.1 M PBS system, indicating the advantage by using the Fe-N-C catalysts at the cathode of L/O-BFC. Last but not least, the L/O-BFC with the direct electron transfer (DET)-type lactate oxidase(LOx) anode and the Fe-N-C cathode produced an superior open circuit potential (OCP) of 0.264 V and a maximum output power density (OPD) of 24.430 μW cm^-2 in O₂ saturated 95.020 mM lactate solution. The above results will not only bring about significant interest in developing a DET-type biofuel cell, but also offer guiding direction to explore novel catalyst materials for the biofuel cell. This work enriches the research content and may push developments of the implantable and wearable biofuel cell forward.

State of the art of tertiary treatment technologies for controlling antibiotic resistance in wastewater treatment plants

Antibiotic resistance genes (ARGs) have been considered as emerging contaminants of concern nowadays. There are no special technologies designed to directly remove ARGs in wastewater treatment plants (WWTPs). In order to reduce the risk of ARGs, it is vital to understand the efficiency of advanced treatment technologies in removing antibiotic resistance genes in WWTPs. This review highlights the application and efficiency of tertiary treatment technologies on the elimination of ARGs, s, based on an understanding of their occurrence and fate in WWTPs. These technologies include chemical-based processes such as chlorination, ozonation, ultraviolet, and advanced oxidation technology, as well as physical separation processes, biological processes such as constructed wetland and membrane bioreactor, and soil aquifer treatment. The merits, limitations and ameliorative measures of these processes are discussed, with the view to optimizing future treatment strategies and identifying new research directions.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Application of microbial fuel cell technology for vinasse treatment and bioelectricity generation

OBJECTIVE

Our study evaluated the performance of different two-chambered microbial fuel cell (MFC) prototypes, operated with variable distance between electrodes and Nafion membrane and specific inoculum concentration, applied for vinasse treatment.

RESULTS

The performance of the developed MFC resulted in a maximum current density of 1200 mA m^-2 and power density of 800 mW m^-2 in a period of 61 days. MFC performed a chemical oxygen demand removal at a rate ranging from 51 to 60%.

CONCLUSIONS

Taking our preliminary results into consideration, we concluded that the MFC technology presents itself as highly promising for the treatment of vinasse.

Ethanol generation, oxidation and energy production in a cooperative bioelectrochemical system

Integrating in situ biofuel production and energy conversion into a single system ensures the production of more robust networks as well as more renewable technologies. For this purpose, identifying and developing new biocatalysts is crucial. Herein, is reported a bioelectrochemical system consisting of alcohol dehydrogenase (ADH) and Saccharomyces cerevisiae, wherein both function cooperatively for ethanol production and its bioelectrochemical oxidation. Here, it is shown that it is possible to produce ethanol and use it as a biofuel in a tandem manner. The strategy is to employ flexible carbon fibres (FCF) electrode that could adsorb both the enzyme and the yeast cells. Glucose is used as a substrate for the yeast for the production of ethanol, while the enzyme is used to catalyse the oxidation of ethanol to acetaldehyde. Regarding the generation of reliable electricity based on electrochemical systems, the biosystem proposed in this study operates at a low temperature and ethanol production is proportional to the generated current. With further optimisation of electrode design, we envision the use of the cooperative biofuel cell for energy conversion and management of organic compounds.

A decahaem cytochrome as an electron conduit in protein-enzyme redox processes

The decahaem cytochrome MtrC from Shewanella oneidensis MR-1 was employed as a protein electron conduit between a porous indium tin oxide electrode and redox enzymes. Using a hydrogenase and a fumarate reductase, MtrC was shown as a suitable and efficient diode to shuttle electrons to and from the electrode with the MtrC redox activity regulating the direction of the enzymatic reactions.

Improved Performance of Glucose Bioanodes Using Composites of (7,6) Single-Walled Carbon Nanotubes and a Ferrocene-LPEI Redox Polymer

The effect of incorporating different types of carbon nanotubes into composite films of a redox polymer (FcMe₂-C₃-LPEI) and glucose oxidase (GOX) was investigated. The composite films were constructed by first forming a high-surface area network film of either single-walled carbon nanotubes (SWNTs) or multiwalled carbon nanotubes (MWNTs) on a glassy carbon electrode (GCE) by solution casting of a suspension of Triton-X-100 dispersed SWNTs. Next a glucose responsive redox hydrogel was formed on top of the nanotube-modified electrode by cross-linking FcMe₂-C₃-LPEI with glucose oxidase via ethylene glycol diglycidyl ether (EGDGE). Electrochemical and enzymatic measurements showed that composite films made with (7,6) SWNTs produced a higher response (3.3 mA/cm²) to glucose than films made with (6,5) SWNTs (1.8 mA/cm²) or MWNTs (1.2 mA/cm²) or films made without SWNTs (0.7 mA/cm²). We also show that the response of the composite films could be systematically varied by fabricating SWNT films with different weight ratios of (7,6) and (6,5) SWNTs. Optimization of the (7,6) SWNTs loading and the redox polymer-enzyme film produced a glucose response of 11.2 mA/cm². Combining the optimized glucose films with a platinum oxygen breathing cathode into a biofuel cell produced a maximum power density output of 343 μW/cm².

Microbial fuel cells: From fundamentals to applications. A review

In the past 10-15 years, the microbial fuel cell (MFC) technology has captured the attention of the scientific community for the possibility of transforming organic waste directly into electricity through microbially catalyzed anodic, and microbial/enzymatic/abiotic cathodic electrochemical reactions. In this review, several aspects of the technology are considered. Firstly, a brief history of abiotic to biological fuel cells and subsequently, microbial fuel cells is presented. Secondly, the development of the concept of microbial fuel cell into a wider range of derivative technologies, called bioelectrochemical systems, is described introducing briefly microbial electrolysis cells, microbial desalination cells and microbial electrosynthesis cells. The focus is then shifted to electroactive biofilms and electron transfer mechanisms involved with solid electrodes. Carbonaceous and metallic anode materials are then introduced, followed by an explanation of the electro catalysis of the oxygen reduction reaction and its behavior in neutral media, from recent studies. Cathode catalysts based on carbonaceous, platinum-group metal and platinum-group-metal-free materials are presented, along with membrane materials with a view to future directions. Finally, microbial fuel cell practical implementation, through the utilization of energy output for practical applications, is described.

Dynamics of antibiotic resistance genes in microbial fuel cell-coupled constructed wetlands treating antibiotic-polluted water

Microbial fuel cell-coupled constructed wetlands (CW-MFCs) use electrochemical, biological, and ecological functions to treat wastewater. However, few studies have investigated the risks of antibiotic resistance genes (ARGs) when using such systems to remove antibiotics. Therefore, three CW-MFCs were designed to assess the dynamics of ARGs in filler biofilm and effluent over 5000 h of operation. The experimental results indicated that relatively high steady voltages of 605.8 mV, 613.7 mV, and 541.4 mV were obtained at total influent antibiotic concentrations of 400, 1,000, and 1600 μg L^-1, respectively. The 16S rRNA gene level in the cathode layer was higher than those in the anode and two middle layers, but the opposite trend was observed for the sul and tet genes. The relative abundance of the three tested sul genes were in the order sulI > sulII > sulIII, and those of the five tet genes were in the order tetA > tetC > tetW > tetO > tetQ. The levels of sul and tet genes in the media biofilm showed an increase over the treatment period. The effluent water had relatively low abundances of sul and tet genes compared with the filler biofilm. No increases were observed for most ARGs over the treatment period, and no significant correlations were observed between the ARGs and 16S rRNA gene copy numbers, except for sulI and tetW in the effluent. However, significant correlations were observed among most of the ARG copy numbers.

Decolourisation of Acid orange 7 in a microbial fuel cell with a laccase-based biocathode: Influence of mitigating pH changes in the cathode chamber

Biocathodes may be a suitable replacement of platinum in microbial fuel cells (MFCs) if the cost of MFCs is to be reduced. However, the use of enzymes as bio-cathodes is fraught with loss of activity as time progresses. A possible cause of this loss in activity might be pH increase in the cathode as pH gradients in MFCs are well known. This pH increase is however, accompanied by simultaneous increase in salinity; therefore salinity may be a confounding variable. This study investigated various ways of mitigating pH changes in the cathode of MFCs and their effect on laccase activity and decolourisation of a model azo dye Acid orange 7 in the anode chamber. Experiments were run with catholyte pH automatically controlled via feedback control or by using acetate buffers (pH 4.5) of various strength (100mM and 200mM), with CMI7000 as the cation exchange membrane. A comparison was also made between use of CMI7000 and Nafion 117 as the transport properties of cations for both membranes (hence their potential effects on pH changes in the cathode) are different. Results show that using Nafion 117 membrane limits salinity and pH changes in the cathode (100mM acetate buffer as catholyte) leading to prolonged laccase activity and faster AO7 decolourisation compared to using CMI7000 as a membrane; similarly automatic pH control in the cathode chamber was found to be better than using 200mM acetate buffer. It is suggested that while pH control in the cathode chamber is important, it does not guarantee sustained laccase activity; as salinity increases affect the activity and it could be mitigated using a cation selective membrane.

Carbon nanotube modification of microbial fuel cell electrodes

The use of carbon nanotubes (CNTs) for energy harvesting devices is preferable due to their unique mechanical, thermal, and electrical properties. On the other hand, microbial fuel cells (MFCs) are promising devices to recover carbon-neutral energy from the organic matters, and have been hindered with major setbacks towards commercialization. Nanoengineered CNT-based materials show remarkable electrochemical properties, and therefore have provided routes towards highly effective modification of MFC compartments to ultimately reach the theoretical limits of biomass energy recovery, low-cost power production, and thus the commercialization of MFCs. Moreover, these CNT-based composites offer significant flexibility in the design of MFCs that enable their use for a broad spectrum of applications ranging from scaled-up power generation to medically related devices. This article reviews the recent advances in the modification of MFCs using CNTs and CNT-based composites, and the extent to which each modification route impacts MFC power and current generation.

Fate of tetracycline and sulfamethoxazole and their corresponding resistance genes in microbial fuel cell coupled constructed wetlands

CW-MFC could significantly reduce the concentrations of TC and SMX in wastewater.

Innovative statistical interpretation of Shewanella oneidensis microbial fuel cells data

The last decade of research has made significant strides toward practical applications of Microbial Fuel Cells (MFCs); however, design improvements and operational optimization cannot be realized without equally considering engineering designs and biological interfacial reactions. In this study, the main factors contributing to MFCs' overall performance and their influence on MFC reproducibility are discussed. Two statistical approaches were used to create a map of MFC components and their expanded uncertainties, principal component analysis (PCA) and uncertainty of measurement results (UMR). PCA was used to identify the major factors influencing MFCs and to determine their ascendency over MFC operational characteristics statistically. UMR was applied to evaluate the factors' uncertainties and estimate their level of contribution to the final irreproducibility. In order to simplify the presentation and concentrate on the MFC components, only results from Shewanella spp. were included; however, a similar analysis could be applied for any DMRB or microbial community. The performed PCA/UMR analyses suggest that better reproducibility of MFC performance can be achieved through improved design parameters. This approach is exactly opposite to the MFC optimization and scale up approach, which should start with improving the bacteria-electrode interactions and applying these findings to well-designed systems.

Relationship between surface chemistry, biofilm structure, and electron transfer in Shewanella anodes

A better understanding of how anode surface properties affect growth, development, and activity of electrogenic biofilms has great potential to improve the performance of bioelectrochemical systems such as microbial fuel cells. The aim of this paper was to determine how anodes with specific exposed functional groups (-N(CH3)3 (+), -COOH, -OH, and -CH3), created using ω-substituted alkanethiolates self-assembled monolayers attached to gold, affect the surface properties and functional performance of electrogenic Shewanella oneidensis MR-1 biofilms. A combination of spectroscopic, microscopic, and electrochemical techniques was used to evaluate how electrode surface chemistry influences morphological, chemical, and functional properties of S. oneidensis MR-1 biofilms, in an effort to develop improved electrode materials and structures. Positively charged, highly functionalized, hydrophilic surfaces were beneficial for growth of uniform biofilms with the smallest cluster sizes and intercluster diffusion distances, and yielding the most efficient electron transfer. The authors derived these parameters based on 3D morphological features of biofilms that were directly linked to functional properties of the biofilm during growth and that, during polarization, were directly connected to the efficiency of electron transfer to the anode. Our results indicate that substratum chemistry affects not only primary attachment, but subsequent biofilm development and bacterial physiology.

Recent advances in application of chitosan in fuel cells

Fuel cells are electrochemical devices which convert chemical energy into electrical energy. Fuel cells have attracted attention due to their potential as a promising alternative to traditional power sources. More recently, efficient and environmentally benign biopolymer “chitosan” have been extensively investigated as a novel material for its application in fuel cells. This biopolymer can be used in both membrane electrolyte and electrode in various fuel cells such as alkaline polymer electrolyte fuel cells, direct methanol fuel cells and biofuel cells. This review provides an overview of main available fuel cells following by application of chitosan as novel biopolymer in fuel cells technology. Recent achievements are included and recommendations are also given for areas of future research.

Towards a hybrid anaerobic digester-microbial fuel cell integrated energy recovery system: an overview of the development of an electrogenic biofilm

An electrogenic biofilm was developed on a macroporous chitosan-carbon nanotube (CHIT-CNT) electrode under constant poised potential (-0.25V versus Ag/AgCl reference electrode) and flow through conditions utilizing the effluent of an anaerobic digester as both the inoculant and substrate for the electrogenic biofilm. After 125 days of inoculation the bioelectrode demonstrated an open circuit potential of -0.62V and a current density of 9.43μAcm(-3) (at -0.25V). Scanning electron microscopy images indicate thorough surface coverage of the biofilm with a high density of bacterial nanowires physically connecting bacteria to bacteria and bacteria to carbon nanotube (electrode surface) suggesting the nanowires are electrically conductive. DGGE was used to identify the major bacterial and archaeal populations.

Chitosan biopolymer for fuel cell applications

Fuel cell is an electrochemical device which converts chemical energy stored in a fuel into electrical energy. Fuel cells have been receiving attention due to its potential applicability as a good alternative power source. Recently, cost-effective and eco-friendly biopolymer chitosan has been extensively studied as a material for membrane electrolytes and electrodes in low to intermediate temperature hydrogen polymer electrolyte fuel cell, direct methanol fuel cell, alkaline fuel cell, and biofuel cell. This paper reviews structure and property of chitosan with respect to its applications in fuel cells. Recent achievements and prospect of its applications have also been included.

Enzymatic versus microbial bio-catalyzed electrodes in bio-electrochemical systems

Catalyses of electrode reactions by oxidoreductases or living electroactive bacteria are compared and recent advances reviewed. The relation between the biological and nevertheless inert nature of enzymes and the living machinery of electroactive microbes is discussed. The way these biocatalysts may be electrically contacted to anodes or cathodes is considered with a focus on their immobilization at electrodes and on the issue of time stability of these assemblies. Recent improvements in power output of biofuel cells are reviewed together with applications that have appeared in the literature. This account also reviews new approaches for combining enzymes and living microbes in bioelectrochemical systems such as reproducing microbial metabolisms with enzyme cascades and expressing oxidoreductases on genetically engineered microbes. Finally, the use of surface chemistry for studying the microbe-electrode interface and bioelectrodes with cell organelles, such as mitochondria, or with higher organisms, such as yeasts, are discussed. Some perspectives for future research to extend this field are offered as conclusions.

Importance of OH(-) transport from cathodes in microbial fuel cells

Cathodic limitation in microbial fuel cells (MFCs) is considered an important hurdle towards practical application as a bioenergy technology. The oxygen reduction reaction (ORR) needs to occur in MFCs under significantly different conditions compared to chemical fuel cells, including a neutral pH. The common reason cited for cathodic limitation is the difficulty in providing protons to the catalyst sites. Here, we show that it is not the availability of protons, but the transport of OH(-) from the catalyst layer to the bulk liquid that largely governs cathodic potential losses. OH(-) is a product of an ORR mechanism that has not been considered dominant before. The accumulation of OH(-) at the catalyst sites results in an increase in the local cathode pH, resulting in Nernstian concentration losses. For Pt-based gas-diffusion cathodes, using polarization curves developed in unbuffered and buffered solutions, we quantified this loss to be >0.3 V at a current density of 10 Am(-2) . We show that this loss can be partially overcome by replacing the Nafion binder used in the cathode catalyst layer with an anion-conducting binder and by providing additional buffer to the cathode catalyst directly in the form of CO(2) , which results in enhanced OH(-) transport. Our results provide a comprehensive analysis of cathodic limitations in MFCs and should allow researchers to develop and select materials for the construction of MFC cathodes and identify operational conditions that will help minimize Nernstian concentration losses due to pH gradients.