Correlation between Intracellular Cofactor Concentrations and Biocatalytic Efficiency: Coexpression of Diketoreductase and Glucose Dehydrogenase for the Preparation of Chiral Diol for Statin Drugs

Enlightening the Path to Protein Engineering: Chemoselective Turn-On Probes for High-Throughput Screening of Enzymatic Activity

Many successful stories in enzyme engineering are based on the creation of randomized diversity in large mutant libraries, containing millions to billions of enzyme variants. Methods that enabled their evaluation with high throughput are dominated by spectroscopic techniques due to their high speed and sensitivity. A large proportion of studies relies on fluorogenic substrates that mimic the chemical properties of the target or coupled enzymatic assays with an optical read-out that assesses the desired catalytic efficiency indirectly. The most reliable hits, however, are achieved by screening for conversions of the starting material to the desired product. For this purpose, functional group assays offer a general approach to achieve a fast, optical read-out. They use the chemoselectivity, differences in electronic and steric properties of various functional groups, to reduce the number of false-positive results and the analytical noise stemming from enzymatic background activities. This review summarizes the developments and use of functional group probes for chemoselective derivatizations, with a clear focus on screening for enzymatic activity in protein engineering.

Enantioseparation in Hierarchically Porous Assemblies of Homochiral Cages

Efficient enantioselective separation using porous materials requires tailored and diverse pore environments to interact with chiral substrates; yet, current cage materials usually feature uniform pores. Herein, we report two porous assemblies, PCC-60 and PCC-67, using isostructural octahedral cages with intrinsic microporous cavities of 1.5 nm. The PCC-67 adopts a densely packed mode, while the PCC-60 is a hierarchically porous assembly featuring interconnected 2.4 nm mesopores. Compared with PCC-67, the PCC-60 demonstrates excellent enantioselectivity and recyclability in separating racemic diols and amides. This solid adsorbent PCC-60 is further utilized as a chiral stationary phase for high-performance liquid chromatography (HPLC), enabling the complete separation of six valuable pharmaceutical intermediates. According to quantitative dynamic experiments, the hierarchical pores facilitate the mass transfer within the superstructure, shortening the equilibrium time for adsorbing chiral substrates. Notably, this hierarchically porous material PCC-60 indicates remarkably higher enantiomeric excess (ee) values in separating racemates than PCC-67 with uniform microporous cavities. Control experiments confirm that the presence of mesopores enables the PCC-60 to separate bulky substrates. These results uncover the traditionally underestimated role of hierarchical porosity in porous-superstructure-based enantioseparation.

Immobilisation and flow chemistry: tools for implementing biocatalysis

The merger of enzyme immobilisation and flow chemistry has attracted the attention of the scientific community during recent years. Immobilisation enhances enzyme stability and enables recycling, flow chemistry allows process intensification. Their combination is desirable for the development of more efficient and environmentally friendly biocatalytic processes. In this feature article, we aim to point out important metrics for successful enzyme immobilisation and for reporting flow biocatalytic processes. Relevant examples of immobilised enzymes used in flow systems in organic, biphasic and aqueous systems are discussed. Finally, we describe recent developments to address the cofactor recycling hurdle.

Efficient whole-cell biosynthesis of l-gulose by coupling mannitol-1-dehydrogenase with NADH oxidase

L-Gulose is a rare aldohexose to serve as a building block for anticancer drug bleomycin and nucleoside-based antivirals. However, preparative inaccessibility and high cost have hindered its pharmaceutical application. Despite a regio- and stereo-selective enzymatic synthesis of l-gulose from d-sorbitol using a variant of NAD⁺-dependent mannitol-1-dehydrogenase from Apium graveolens (mMDH) was explored, low efficiency and productivity caused by NADH accumulation or insufficient amount of NAD⁺ limited the practical utility of this process. In this study, a stable and efficient NADH oxidase from Bacillus cereus (bcNOX) was found to be more compatible with mMDH to recycle NAD⁺ in E. coli cells for l-gulose biosynthesis. After a systematic optimization of the whole-cell system, efficient biosynthesis of l-gulose was achieved. Starting with 70 g/L of readily available and cheap d-sorbitol resulted in a volumetric productivity of 5.5 g/L/d. This whole-cell approach enables practical, efficient and environmentally friendly biosynthesis of l-gulose and exhibits the potential of becoming a biocatalytic strategy for various enzymatic oxidative transformations.

Biocatalytic approaches for the synthesis of optically pure vic-halohydrins

Enantiopure vicinal halohydrins (vic-halohydrins) are highly valuable building blocks for the synthesis of many different natural products and pharmaceuticals, and biocatalytic methods for their synthesis have received considerable interest. This review emphasizes the application of biocatalytic approaches as an efficient alternative or complement to conventional chemical reactions, with a special focus on the asymmetric reductions catalyzed by ketoreductases, kinetic resolution catalyzed using lipases or esterases, stereoselective biotransformation catalyzed by halohydrin dehalogenases, asymmetric hydroxylation catalyzed by cytochrome P450 monooxygenases, asymmetric dehalogenation catalyzed by haloalkane dehalogenases, and aldehyde condensation catalyzed by aldolases. Although many chiral vic-halohydrins have been successfully synthesized using wild-type biocatalysts, their enantioselectivity is often too low for enantiopure synthesis. To overcome these limitations, catalytic properties of wild-type enzymes have been improved by rational and semi-rational protein design or directed evolution. This review briefly introduces the research status in this field, highlighting aspects of basic academic research in the biocatalytic synthesis of optically active vic-halohydrins by employing such unconventional approaches. KEY POINTS: • Outlines the enzymatic strategies for the production of enantiopure vic-halohydrins • Highlights recent advances in biocatalytic production of enantiopure vic-halohydrins • Provide guidance for efficient preparation of enantiopure vic-halohydrins.

Discovery and Engineering of an Aldehyde Tolerant 2-deoxy-D-ribose 5-phosphate Aldolase (DERA) from Pectobacterium atrosepticum

DERA (2-Deoxy-D-ribose 5-phosphate aldolase) is the only known aldolase that accepts two aldehyde substrates, which makes it an attractive catalyst for the synthesis of a chiral polyol motif that is present in several pharmaceuticals, such as atorvastatin and pravastatin. However, inactivation of the enzyme in the presence of aldehydes hinders its practical application. Whole cells of Pectobacterium atrosepticum were reported to exhibit good tolerance toward acetaldehyde and to afford 2-deoxyribose 5-phosphate with good yields. The DERA gene (PaDERA) was identified, and both the wild-type and a C49M mutant were heterologously expressed in Escherichia coli. The purification protocol was optimized and an initial biochemical characterization was conducted. Unlike other DERAs, which show a maximal activity between pH 4.0 and 7.5, PaDERA presented an optimum pH in the alkaline range between 8.0 and 9.0. This could warrant its use for specific syntheses in the future. PaDERA also displayed fourfold higher specific activity than DERA from E. coli (EcDERA) and displayed a promising acetaldehyde resistance outside the whole-cell environment. The C49M mutation, which was previously identified to increase acetaldehyde tolerance in EcDERA, also led to significant improvements in the acetaldehyde tolerance of PaDERA.

The total synthesis of calcium atorvastatin

A practical and convergent asymmetric route to calcium atorvastatin (1) is reported.

Efficient synthesis of a statin precursor in high space-time yield by a new aldehyde-tolerant aldolase identified from Lactobacillus brevis

A novel 2-deoxyribose-5-phosphate aldolase (LbDERA) was identified from Lactobacillus brevis, with high activity, excellent thermostability and high tolerance against aldehyde substrates.

The "gate keeper" role of Trp222 determines the enantiopreference of diketoreductase toward 2-chloro-1-phenylethanone

Trp222 of diketoreductase (DKR), an enzyme responsible for reducing a variety of ketones to chiral alcohols, is located at the hydrophobic dimeric interface of the C-terminus. Single substitutions at DKR Trp222 with either canonical (Val, Leu, Met, Phe and Tyr) or unnatural amino acids (UAAs) (4-cyano-L-phenylalanine, 4-methoxy-L-phenylalanine, 4-phenyl-L-phenyalanine, O-tert-butyl-L-tyrosine) inverts the enantiotope preference of the enzyme toward 2-chloro-1-phenylethanone with close side chain correlation. Analyses of enzyme activity, substrate affinity and ternary structure of the mutants revealed that substitution at Trp222 causes a notable change in the overall enzyme structure, and specifically in the entrance tunnel to the active center. The size of residue 222 in DKR is vital to its enantiotope preference. Trp222 serves as a "gate keeper" to control the direction of substrate entry into the active center. Consequently, opposite substrate-binding orientations produce respective alcohol enantiomers.

Engineering NAD+ availability for Escherichia coli whole-cell biocatalysis: a case study for dihydroxyacetone production

Background

Whole-cell redox biocatalysis has been intensively explored for the production of valuable compounds because excellent selectivity is routinely achieved. Although the cellular cofactor level, redox state and the corresponding enzymatic activity are expected to have major effects on the performance of the biocatalysts, our ability remains limited to predict the outcome upon variation of those factors as well as the relationship among them.

Results

In order to investigate the effects of cofactor availability on whole-cell redox biocatalysis, we devised recombinant Escherichia coli strains for the production of dihydroxyacetone (DHA) catalyzed by the NAD⁺-dependent glycerol dehydrogenase (GldA). In this model system, a water-forming NAD⁺ oxidase (NOX) and a NAD⁺ transporter (NTT4) were also co-expressed for cofactor regeneration and extracellular NAD⁺ uptake, respectively. We found that cellular cofactor level, NAD⁺/NADH ratio and NOX activity were not only strain-dependent, but also growth condition-dependent, leading to significant differences in specific DHA titer among different whole-cell biocatalysts. The host E. coli DH5α had the highest DHA specific titer of 0.81 g/g_DCW with the highest NAD⁺/NADH ratio of 6.7 and NOX activity of 3900 U. The biocatalyst had a higher activity when induced with IPTG at 37°C for 8 h compared with those at 30°C for 8 h and 18 h. When cells were transformed with the ntt4 gene, feeding NAD⁺ during the cell culture stage increased cellular NAD(H) level by 1.44 fold and DHA specific titer by 1.58 fold to 2.13 g/g_DCW. Supplementing NAD⁺ during the biotransformation stage was also beneficial to cellular NAD(H) level and DHA production, and the highest DHA productivity reached 0.76 g/g_DCW/h. Cellular NAD(H) level, NAD⁺/NADH ratio, and NOX and GldA activity dropped over time during the biotransformation process.

Conclusions

High NAD⁺/NADH ratio driving by NOX was very important for DHA production. Once cofactor was efficiently cycled, high cellular NAD(H) level was also beneficial for whole-cell redox biocatalysis. Our results indicated that NAD⁺ transporter could be applied to manipulate redox cofactor level for biocatalysis. Moreover, we suggested that genetically designed redox transformation should be carefully profiled for further optimizing whole-cell biocatalysis.

Enhancement of biocatalytic efficiency by increasing substrate loading: enzymatic preparation of L-homophenylalanine

Enantiomerically pure L-homophenylalanine (L-HPA) is a key building block for the synthesis of angiotensin-converting enzyme inhibitors and other chiral pharmaceuticals. Among the processes developed for the L-HPA production, biocatalytic synthesis employing phenylalanine dehydrogenase has been proven as the most promising route. However, similar to other dehydrogenase-catalyzed reactions, the viability of this process is markedly affected by insufficient substrate loading and high costs of the indispensable cofactors. In the present work, a highly efficient and economic biocatalytic process for L-HPA was established by coupling genetically modified phenylalanine dehydrogenase and formate dehydrogenase. Combination of fed-batch substrate addition and a continuous product removal greatly increased substrate loading and cofactor utilization. After systemic optimization, 40 g (0.22 mol) of keto acid substrate was transformed to L-HPA within 24 h and a total of 0.2 mM NAD(+) was reused effectively in eight cycles of fed-batch operation, consequently giving an average substrate concentration of 510 mM and a productivity of 84.1 g l(-1) day(-1) for L-HPA. The present study provides an efficient and feasible enzymatic process for the production of L-HPA and a general solution for the increase of substrate loading.

Genetic incorporation of D-lysine into diketoreductase in Escherichia coli cells

Pyrococcus horikoshii lysyl-tRNA synthetase/tRNA orthogonal pair exhibited high selectivity towards D-lysine in the presence of excess amount of D-lysine. Based on the observation, this orthogonal pair was employed to encode D-lysine, and D-lysine was site-specifically incorporated into the diketoreductase in E. coli cells.