Metal–Organic Frameworks for Light Harvesting and Photocatalysis

Morphological Evolution of Metal-Organic Frameworks into Hedrite, Sheaf and Spherulite Superstructures with Localized Different Coloration

The branched metal-organic frameworks (MOFs) are the first superstructures of this kind, and the growth mechanism may explain crystal shapes of other materials. The mechanism of the formation of fascinating structures having a hedrite, sheaf or spherulite appearance are detailed. The branching can be controlled, resulting in crystals that either exhibit multiple generations of branching or a single generation. These structures might result from an increasing number of defects on fast-grown rods. As the basal facets become less reactive, material is added to the prism facets, leading to secondary nucleation and triangular branches. These triangular structures are connected to the rod surface, growing longer than the central rod. Electron diffraction analyses show that the sheafs are polycrystalline structures with their fantails consisting of single-crystalline nanorods deviating gradually from each other in their orientation. The crystallographic structure consists of channels with opposite handedness. The accessibility of the nanochannels and the porosity of the superstructures are demonstrated by chromophore diffusion into the channels. The confinement and alignment of the chromophores inside the channels resulted in polarized-light dependent coloration of the crystals; the polycrystallinity generated areas having different optical properties.

Enhancing Electron Donor-Acceptor Complex Photoactivation with a Stable Perylene Diimide Metal-Organic Framework

Electron donor-acceptor complexes are commonly employed to facilitate photoinduced radical-mediated organic reactions. However, achieving these photochemical processes with catalytic amounts of donors or acceptors can be challenging, especially when aiming to reduce catalyst loadings. Herein, we have unveiled a framework-based heterogenization approach that significantly enhances the photoredox activity of perylene diimide species in radical addition reactions with alkyl silicates by promoting faster and more efficient electron donor-acceptor complex formation. Besides offering broad substrate scope in alkene hydroalkylation, the newly developed heterogeneous photocatalysis substantially improves the catalyst turnover numbers in comparison to previous homogeneous photocatalytic systems and demonstrates outstanding catalyst recyclability. These research findings pave the way for the advancement of various efficient and practical organic transformations using framework-supported organocatalysts.

Beyond Tradition: A MOF-On-MOF Cascade Z-Scheme Heterostructure for Augmented CO2 Photoreduction

Metal-organic frameworks (MOFs) are rigorously investigated as promising candidates for CO2 capture and conversion. MOF-on-MOF heterostructures integrate bolstered charger carrier separation with the intrinsic advantages of MOF components, exhibiting immense potential to substantially escalate the efficiency of photocatalytic CO2 reduction (CO2RR). However, the structural and compositional complexity poses significant challenges to the controllable development of these heterostructures. Herein, a conventional MOF-on-MOF nanocomposite is readily optimized from a type II heterojunction to a state-of-the-art cascade Z-scheme configuration via the encapsulation of Pt nanoparticles (Pt NPs), establishing synergistic MOF-MOF and metal-MOF heterojunctions with reinforced built-in electric field. A cascade electron flow is thus propelled, vigorously separating the photogenerated charge carriers and profoundly extending their lifetimes. Collectively, the photocatalytic activity of the cascade Z-scheme is drastically promoted, exhibiting a nearly quintuple enhancement in the CO production rate over the original type II heterostructure. Moreover, the anti-sintering capacity of the developed nanocomposite is unveiled, elucidating its simultaneously improved activity and stability. These findings present unprecedented regulation over the configuration of a MOF-on-MOF heterojunction, substantially enriching the fundamental understanding and rational design strategies of composite materials.

Metal-organic frameworks (MOFs) of an MIL-101-supported iridium(III) complex as efficient photocatalysts in the three-component alkoxycyanomethylation of alkenes

Metal-organic frameworks (MOFs) exhibit intriguing physicochemical properties due to their manageable structure, abundant porosity, and uniform pore size, which provide ideal environments for photocatalysts to achieve highly efficient photocatalysis. In this work, fac-Ir(ppy)3 is directly anchored to MOFs of MIL-101 with different morphologies via Friedel-Crafts alkylation, affording various MIL-101-supported fac-Ir(ppy)3 without the molecular modification of fac-Ir(ppy)3. The as-fabricated photocatalysts possess high specific surface areas (785-962 m2 g-1), pore volumes (0.42-0.47 cc g-1) and uniform pore sizes (∼1.9 nm). The luminescence properties of anchored fac-Ir(ppy)3 including emission lifetime, band gap energy and quantum yield are enhanced by fabricating a hollow interior and double shell in the frameworks of MIL-101 through etching with acetic acid. In the visible light-induced three-component alkoxycyanomethylation of styrenes with bromoacetonitriles and methanol, comparable catalytic activities (66-90%) to homogeneous fac-Ir(ppy)3 (69-90%) are achieved at room temperature. Furthermore, owing to the good chemical and mechanical stability of the catalyst, no significant decrease in yield (<2%) is observed over ten catalytic cycles. Overall, this study provides a mass/charge transfer-enhanced platform for supported photocatalysts to achieve highly efficient synthesis of fine chemicals in the field of heterogeneous photocatalysis.

Unexpected Photodriven Linker-to-Node Hole Transfer in a Zirconium-Based Metal-Organic Framework

Zr6(μ3-O)4(μ3-OH)4 node cores are indispensable building blocks for almost all zirconium-based metal-organic frameworks. Consistent with the insulating nature of zirconia, they are generally considered electronically inert. Contrasting this viewpoint, we present spectral measurements and calculations indicating that emission from photoexcited NU-601, a six-connected Zr-based MOF, comes from both linker-centric locally excited and linker-to-node charge-transfer (CT) states. The CT state originates from a hole transfer process enabled by favorable energy alignment of the HOMOs of the node and linker. This alignment can be manipulated by changing the pH of the medium, which alters the protonation state of multiple oxy groups on the Zr-node. Thus, the acid-base chemistry of the node has a direct effect on the photophysics of the MOF following linker-localized electronic excitation. These new findings open opportunities to understand and exploit, for energy conversion, unconventional mechanisms of exciton formation and transport in MOFs.

Noble Metal Plasmon-Molecular Catalyst Hybrids for Renewable Energy Relevant Small Molecule Activation

Significant endeavors have been dedicated to the advancement of materials for artificial photosynthesis, aimed at efficiently harvesting light and catalyzing reactions such as hydrogen production and CO2 conversion. The application of plasmonic nanomaterials emerges as a promising option for this purpose, owing to their excellent light absorption properties and ability to confine solar energy at the nanoscale. In this regard, coupling plasmonic particles with molecular catalysts offers a pathway to create high-performance hybrid catalysts. In this review, we discuss the plasmonic-molecular complex hybrid catalysts where the plasmonic nanoparticles serve as the light-harvesting unit and promote interfacial charge transfer in tandem with the molecular catalyst which drives chemical transformation. In the initial section, we provide a concise overview of plasmonic nanomaterials and their photophysical properties. We then explore recent breakthroughs, highlighting examples from literature reports involving plasmonic-molecular complex hybrids in various catalytic processes. The utilization of plasmonic materials in conjunction with molecular catalysts represents a relatively unexplored area with substantial potential yet to be realized. This review sets a strong basis and motivation to explore the plasmon-induced hot-electron mediated photelectrochemical small molecule activation reactions. Utilizing in situ spectroscopic investigations and ultrafast transient absorption spectroscopy, it presents a comprehensive template for scalable and sustainable antenna-reactor systems.

Zn, Cd and Cu Coordination Polymers for Metronidazole Sensing and for Ullmann and Chan-Lam Coupling Reactions

Five compounds, [Zn2(bpe)(BPTA)2(H2O)2] ⋅ 2H2O (1); [Zn(bpe)(BPTA)] (2); [Cd(bpe)(BPTA)H2O] (3); [Cd(BPTA) (bpmh)] ⋅ 2H2O (4); and Cu2(BPTA)2(bpmh)3(H2O)2] ⋅ 2H2O (5) were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2, 5 BPTA) as the primary ligand and 1,2-di(pyridin-4-yl)ethane (4, 4' bpe) (1-3) and 1,2-bis(pyridin-3-ylmethylene)hydrazine (bpmh) (4-5) as the secondary ligands. Single crystal studies indicated that the compounds 1, 3 and 5 have two-dimensional layer structures and compounds 2 and 4 three-dimensional structures. The luminescence behaviour of the compounds 2 and 3 were explored for the sensing of metronidazole in aqueous medium. The studies indicated that the compounds can detect metronidazole in ppm level both in solution as well as simple paper strips. The Cu compound 5 was found to lose the coordinated water molecule at 100 °C without any structural change. The coordinatively unsaturated Cu-centre were examined towards the Lewis acidic character by carrying out the Ullmann type C-C homocoupling reaction of the aromatic halide compounds. The compounds, 4 and 5, also have the Lewis basic functionality arising out the =N-N=, aza groups. The bifunctional nature of the coordination polymers (CP) was explored towards the Chan-Lam coupling reaction between phenyl boronic acid and aniline derivatives in the ethanol medium. In both the catalytic reactions, good yields and recyclability were observed. The present studies illustrated the rich diversity that the transition metal containing compounds exhibit in extended framework structures.

Heterogeneous Acetalization of Benzaldehyde over Lanthanide Oxalate Metal-Organic Frameworks

Lanthanides (Ln) from the f-blocks of the periodic table have gained significant interest due to their unique characteristics, including magnetism, photoluminescence, and catalysis. In this study, a series of lanthanide metal-organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III), Nd(III), Er(III), Ho(III), Gd(III), Pr(III), and Dy(III)] were constructed based on oxalic acid and lanthanide metals as the building blocks. These MOFs were comprehensively characterized using various analytical and spectroscopic techniques, including powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, nitrogen adsorption-desorption, and Raman spectroscopy. The magnetic properties of the investigated materials were examined, revealing both antiferromagnetic and ferromagnetic interactions within the Ln-Ox MOFs. The catalytic activities of Ln-Ox MOFs were evaluated through the heterogeneous acetalization of benzaldehyde with methanol. Reaction yields by the reported catalysts varied up to 90% depending on the MOF's metal center, and the product was confirmed by gas chromatography-mass spectrometry. Recycling experiments have confirmed the stable regeneration of Ln-Ox MOFs in which the product yields remained the same over four consecutive cycles. The hydrothermal synthesis of these MOFs paves the way for a diverse array of materials showcasing unique lanthanide properties, making them suitable for various applications.

Titanium metal-organic frameworks for photocatalytic CO2 conversion through a cycloaddition reaction

The elevated levels of CO2 in the atmosphere have been a major concern for environmental scientists. Capturing CO2 gas and its subsequent conversion to useful organic compounds is one of the avenues that have been extensively studied in the last decade. The photocatalytic cycloaddition of CO2 is a promising approach for effective CO2 capture and the production of value-added chemicals such as cyclic carbonates. MOF-901, a titanium-based metal-organic framework with hexagonal layers and imine linkages, was successfully oxidized in this study to MOF-997, incorporating amide linkages using Oxone. Both MOFs displayed remarkable photocatalytic activity in CO2 cycloaddition under mild conditions, including moderate temperatures and visible light exposure. Particularly noteworthy is MOF-997, exhibiting superior performance with donor-acceptor active sites, achieving a 99.9% yield in catalyzing CO2 conversion from styrene epoxide to styrene carbonate under solvent conditions.

Heterogeneous Porous Synergistic Photocatalysts for Organic Transformations

Recent interest has surged in using heterogeneous carriers to boost synergistic photocatalysis for organic transformations. Heterogeneous catalysts not only facilitate synergistic enhancement of distinct catalytic centers compared to their homogeneous counterparts, but also allow for the easy recovery and reuse of catalysts. This mini-review summarizes recent advancements in developing heterogeneous carriers, including metal-organic frameworks, covalent-organic frameworks, porous organic polymers, and others, for synergistic catalytic reactions. The advantages of porous materials in heterogeneous catalysis originate from their ability to provide a high surface area, facilitate enhanced mass transport, offer a tunable chemical structure, ensure the stability of active species, and enable easy recovery and reuse of catalysts. Both photosensitizers and catalysts can be intricately incorporated into suitable porous carriers to create heterogeneous dual photocatalysts for organic transformations. Notably, experimental evidence from reported cases has shown that the catalytic efficacy of heterogeneous catalysts often surpasses that of their homogeneous analogues. This enhanced performance is attributed to the proximity and confinement effects provided by the porous nature of the carriers. It is expected that porous carriers will provide a versatile platform for integrating diverse catalysts, thus exhibiting superior performance across a range of organic transformations and appealing prospect for industrial applications.

Recent Advances of Bimetallic-Metal Organic Frameworks: Preparation, Properties, and Fluorescence-Based Biochemical Sensing Applications

Bimetallic-metal organic frameworks (BiM-MOFs) or bimetallic organic frameworks represent an innovative and promising class of porous materials, distinguished from traditional monometallic MOFs by their incorporation of two metal ions alongside organic linkers. BiM-MOFs, with their unique crystal structure, physicochemical properties, and composition, demonstrate distinct advantages in the realm of biochemical sensing applications, displaying improvements in optical properties, stability, selectivity, and sensitivity. This comprehensive review explores into recent advancements in leveraging BiM-MOFs for fluorescence-based biochemical sensing, providing insights into their design, synthesis, and practical applications in both chemical and biological sensing. Emphasizing fluorescence emission as a transduction mechanism, the review aims to guide researchers in maximizing the potential of BiM-MOFs across a broader spectrum of investigations. Furthermore, it explores prospective research directions and addresses challenges, offering valuable perspectives on the evolving landscape of fluorescence-based probes rooted in BiM-MOFs.

Amyloid detection in neurodegenerative diseases using MOFs

Neurodegenerative diseases (amyloid diseases such as Alzheimer's and Parkinson's), stemming from protein misfolding and aggregation, encompass a spectrum of disorders with severe systemic implications. Timely detection is pivotal in managing these diseases owing to their significant impact on organ function and high mortality rates. The diverse array of amyloid disorders, spanning localized and systemic manifestations, underscores the complexity of these conditions and highlights the need for advanced detection methods. Traditional approaches have focused on identifying biomarkers using imaging techniques (PET and MRI) or invasive procedures. However, recent efforts have focused on the use of metal-organic frameworks (MOFs), a versatile class of materials known for their unique properties, in revolutionizing amyloid disease detection. The high porosity, customizable structures, and biocompatibility of MOFs enable their integration with biomolecules, laying the groundwork for highly sensitive and specific biosensors. These sensors have been employed using electrochemical and photophysical techniques that target amyloid species under neurodegenerative conditions. The adaptability of MOFs allows for the precise detection and quantification of amyloid proteins, offering potential advancements in early diagnosis and disease management. This review article delves into how MOFs contribute to detecting amyloid diseases by categorizing their uses based on different sensing methods, such as electrochemical (EC), electrochemiluminescence (ECL), fluorescence, Förster resonance energy transfer (FRET), up-conversion luminescence resonance energy transfer (ULRET), and photoelectrochemical (PEC) sensing. The drawbacks of MOF biosensors and the challenges encountered in the field are also briefly explored from our perspective.

Powders to Thin Films: Advances in Conjugated Microporous Polymer Chemical Sensors

Chemical sensing of harmful species released either from natural or anthropogenic activities is critical to ensuring human safety and health. Over the last decade, conjugated microporous polymers (CMPs) have been proven to be potential sensor materials with the possibility of realizing sensing devices for practical applications. CMPs found to be unique among other porous materials such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) due to their high chemical/thermal stability, high surface area, microporosity, efficient host-guest interactions with the analyte, efficient exciton migration along the π-conjugated chains, and tailorable structure to target specific analytes. Several CMP-based optical, electrochemical, colorimetric, and ratiometric sensors with excellent selectivity and sensing performance were reported. This review comprehensively discusses the advances in CMP chemical sensors (powders and thin films) in the detection of nitroaromatic explosives, chemical warfare agents, anions, metal ions, biomolecules, iodine, and volatile organic compounds (VOCs), with simultaneous delineation of design strategy principles guiding the selectivity and sensitivity of CMP. Preceding this, various photophysical mechanisms responsible for chemical sensing are discussed in detail for convenience. Finally, future challenges to be addressed in the field of CMP chemical sensors are discussed.

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

Biomedical application of metal-organic frameworks (MOFs) in cancer therapy: Stimuli-responsive and biomimetic nanocomposites in targeted delivery, phototherapy and diagnosis

The nanotechnology is an interdisciplinary field that has become a hot topic in cancer therapy. Metal-organic frameworks (MOFs) are porous materials and hybrid composites consisted of organic linkers and metal cations. Despite the wide application of MOFs in other fields, the potential of MOFs for purpose of cancer therapy has been revealed by the recent studies. High surface area and porosity, significant drug loading and encapsulation efficiency are among the benefits of using MOFs in drug delivery. MOFs can deliver genes/drugs with selective targeting of tumor cells that can be achieved through functionalization with ligands. The photosensitizers and photo-responsive nanostructures including carbon dots and gold nanoparticles can be loaded in/on MOFs to cause phototherapy-mediated tumor ablation. The immunogenic cell death induction and increased infiltration of cytotoxic CD8+ and CD4+ T cells can be accelerated by MOF platforms in providing immunotherapy of tumor cells. The stimuli-responsive MOF platforms responsive to pH, redox, enzyme and ion can accelerate release of therapeutics in tumor site. Moreover, MOF nanocomposites can be modified ligands and green polymers to improve their selectivity and biocompatibility for cancer therapy. The application of MOFs for the detection of cancer-related biomarkers can participate in the early diagnosis of patients.

Heterogeneous MIL-88A on MIL-88B hybrid: A promising eco-friendly hybrid from green synthesis to dual application (Adsorption and photocatalysis) in tetracycline and dyes removal

Herein, the green synthesis of heterogeneous dual functional MIL88A-on-MIL88B hybrids (MIL: Materials InstituteLavoisier) with different amounts of MIL88B compared to MIL88A, including 1:2, 1:1, and 2:1, has been carried out. The photocatalytic degradation of tetracycline and adsorption of tetracycline and dyes (Direct Red 80, Direct Red 23, Acid Blue 92, and Reactive Orange 14) were investigated. Although the ratio of MIL88A-on-MIL88B (1:1) hybrid displayed the best activity, there is a slight difference in the photocatalytic performance of the other mass ratios studied. The result revealed that after 70 min of forming MIL88A on MIL88B, the best pollutant removal performance is obtained. During the limited synthesis time, the lopsided growth of MIL88A on the MIL88B surface limits the formation of sufficient functional groups and new pores between MIL88B as the substrate and MIL88A, which are effective and decisive in the performance. In the photocatalytic studies, the synthesized composite had good compatibility with the zero-order kinetics, and hydroxyl radicals were recognized as the most active species in the photocatalytic reaction. In the adsorption process, the MIL88A-on-MIL88A composite followed pseudo-second-order kinetics and the Langmuir isotherm. Besides, mechanisms such as π-π interaction/stacking, hydrogen bonding, and π-metal interaction were proposed for the pollutant adsorption process.

Photoinduced Dynamic Ligation in Metal-Organic Frameworks

Metal organic frameworks (MOFs), a class of porous crystalline materials consisting of metal-based nodes and organic linkers, have emerged as a promising platform for photocatalysis due to their ultrahigh functional surface area, customizable topologies, and tunable energetics. While interesting photochemistry has been reported, the related photoinduced structural dynamics of MOFs remains unclear. The consensus is that the coordination bonds between MOF nodes and linkers are considered static during photoexcitation, while the open-metal sites on the nodes are taken as the key active sites for catalysis. In this work, through a complementary time-resolved visible and infrared (IR) spectroscopic investigation, along with computational studies, we report for the first time light-induced structural bond dissociation (COO-M) and reformation in an iron-oxo framework, MIL-101(Fe). The probed excited state displayed ligand-to-metal charge transfer (LMCT) characteristics and exhibited a ca. 30 μs lifetime. The incredibly long excited-state lifetime led us to probe potential structural rearrangements that facilitated charge separation in MIL-101(Fe). By probing the vibrational fingerprints of the carboxylate linker upon LMCT photoexcitation, we observed the reversible transition of the carboxylate-Fe bond from a bidentate bridging mode to a monodentate mode, indicating the partial dissociation of the carboxylate ligand. Importantly, the bidentate configuration is recovered on the same time scale of the excited state lifetimes as probed via visible transient absorption spectroscopy. The elucidated photoinduced configurational dynamics provides a foundation for an in-depth understanding of MOF-based photocatalytic mechanisms.

Eosin Y-Based Metal-Organic Framework Synergistic with Cobalt(II) Complex for Hydrogen Evolution through Photoinduced Intermolecular Electron Transfer

Photocatalytic hydrogen evolution reaction (HER) is a promising approach for producing clean energy and has the potential to play an important role in the transition toward a more sustainable and environmentally friendly energy system. Optimizing the photoinduced electron transfer (PET) process and increasing visible-light utilization play a central role in photocatalysis. Herein, we built a novel Eosin Y-based metal-organic framework (Zn-EYTP) by synergizing a cobalt(II) complex for boosting the H2 evolution efficiency through photoinduced intermolecular electron transfer. Under optimized conditions, the maximum H2 evolution efficiency for Zn-EYTP was determined to be a turnover number (TON) value of 11,100 under green LED irradiation. And the synthesized Zn-EYTP photocatalysts could be easily recycled to restore the initial photocatalytic activity even after 3 cycles. Detailed studies reveal that the significantly enhanced HER activity in Zn-EYTP could be ascribed to the effective separation of photogenerated charges and the synergistic intermolecular interaction between Zn-EYTP and [Co(bpy)3]Cl2. The present work enables a deeper understanding of the importance of the PET process for enhanced HER photocatalytic activities, which will provide a viable strategy for the development of highly efficient photocatalysts.

Sunlight-Driven Photocatalysis for a Set of 3D Metal-Porphyrin Frameworks Based on a Planar Tetracarboxylic Ligand and Lanthanide Ions

Metal-porphyrin frameworks (MPFs) with trivalent lanthanide ions are the most sought-after materials in the past decade. Their porosities are usually complemented by optical properties imparted by the metal nodes, making them attractive multifunctional materials. Here, we report a novel family of 3D MPFs obtained through solvothermal reactions between tetrakis(4-carboxyphenyl) porphyrin (H4TCPP) and different lanthanide sources, yielding an isostructural family of compounds along the lanthanide series: [Ln2(DMF)(TCPP)1.5] for Ln = La, Ce, Nd, Pr, Er, Y, Tb, Dy, Sm, Eu, Gd, and Tm. Photoluminescent properties of selected phases were explored at room temperature. Also, the photocatalytic performance exhibited by these compounds under sunlight exposure is promising for its implementation in organic pollutant degradation. In order to study the photocatalytic activity of Ln-TCPPs in an aqueous medium, methylene blue (MB) was used as a contaminant model. The efficiency for MB degradation was Sm > Y > Yb > Gd > Er > Eu > either no catalyst or no light, obtaining more than 70% degradation at 120 min with Sm-TCPP. These results open the possibility of using these compounds in optical and optoelectronic devices for water remediation and sensing.

UV-to-NIR Harvesting Conjugated Porous Polymer Nanocomposite: Upconversion and Plasmon Expedited Thioether Photooxidation

Photocatalysts capable of harvesting a broad range of the solar spectrum are essential for sustainable chemical transformations and environmental remediation. Herein, we have integrated NIR-absorbing upconversion nanoparticles (UCNP) with UV-Vis absorbing conjugated porous organic polymer (POP) through the in situ multicomponent C-C coupling to fabricate a UC-POP nanocomposite. The light-harvesting ability of UC-POP is further augmented by loading plasmonic gold nanoparticles (AuNP) into UC-POP. A three-times enhancement in the upconversion luminescence is observed upon the incorporation of AuNP in UC-POP, subsequently boosting the photocatalytic activity of UC-POP-Au. The spectroscopic and photoelectrochemical investigations infer the enhanced photocatalytic oxidation of thioethers, including mustard gas simulant by UC-POP-Au compared to POP and UC-POP due to the facile electron-hole pair generation, suppressed exciton recombination, and efficient charge carrier migration. Thus, the unique design strategy of combining plasmonic and upconversion nanoparticles with a conjugated porous organic polymer opens up new vistas towards artificial light harvesting.

Synthesis of an efficient MOF catalyst for the degradation of OPDs using TPA derived from PET waste bottles

In this study, a method for degrading PET-waste plastic bottles using ZnCl2:Urea as a catalyst was developed, resulting in high conversion (87%). The terephthalic acid obtained from the degradation of Waste PET Bottles (WPTs) was combined with copper and zinc salts to synthesize bimetallic metal-organic frameworks (MOF). The effectiveness of a bimetallic Cu-Zn(BDC)-MOF in catalyzing the reduction reaction of organic pollutant dyes (OPDs) was investigated, and the degradation efficiency of individual dyes was optimized, achieving over 95% degradation within 6-12 min under optimal conditions. Various techniques, including FT-IR, XRD, FE-SEM, EDS, and TEM were used to characterize the synthesized MOF. Results showed that the catalytic activity of Cu-Zn-MOF in reduction reaction of OPDs was enhanced by increasing the copper content. The reaction kinetics were investigated following pseudo-first-order kinetics with rate constants of 0.581, 0.43, 0.37, and 0.30 min-1 for Methylene Blue (MB), Methyl Orange (MO), 4-Nitrophenol (4-NP), and 4-Nitroaniline (4-NA), respectively. The investigations revealed that the produced catalyst exhibited excellent stability and recoverability, while its activity remained well-preserved even after undergoing three reuse cycles.

Storage and Diffusion of Carbon Dioxide in the Metal Organic Framework MOF-5─A Semi-empirical Molecular Dynamics Study

Metal-organic frameworks (MOFs) have attracted increasing attention due to their high porosity for exceptional gas storage applications. MOF-5 belongs to the family of isoreticular MOFs (IRMOFs) and consists of Zn4O6+ clusters linked by 1,4-benzenedicarboxylate. Due to the large number of atoms in the unit cell, molecular dynamics simulation based on density functional theory has proved to be too demanding, while force field models are often inadequate to model complex host-guest interactions. To overcome this limitation, an alternative semi-empirical approach using a set of approximations and extensive parametrization of interactions called density functional tight binding (DFTB) was applied in this work to study CO2 in the MOF-5 host. Calculations of pristine MOF-5 yield very good agreement with experimental data in terms of X-ray diffraction patterns as well as mechanical properties, such as the negative thermal expansion coefficient and the bulk modulus. In addition, different loadings of CO2 were introduced, and the associated self-diffusion coefficients and activation energies were investigated. The results show very good agreement with those of other experimental and theoretical investigations. This study provides detailed insights into the capability of semi-empirical DFTB-based molecular dynamics simulations of these challenging guest@host systems. Based on the comparison of the guest-guest pair distributions observed inside the MOF host and the corresponding gas-phase reference, a liquid-like structure of CO2 can be deduced upon storage in the host material.

Sun Light Responsive 2D Covalent-Organic Frameworks Platform as a Catalysts Boost C-H Bond Arylation and Dopamine Regeneration

Photocatalysis is one of the most promising methods for producing organic compounds with a renewable source of energy. Two-dimensional covalent organic frameworks (2D COFs) are a type of polymer that has developed as a potential light-harvesting catalyst for artificial photosynthesis with a design-controllable platform that might be developed into a new type of cost-effective and metal-free photocatalyst. Here, we present a two-dimensional covalent organic framework synthesis technique as a low-cost and highly efficient visible light active flexible photocatalyst for C-H bond activation and dopamine regeneration. 2D COF were synthesized from tetramino-benzoquinone (TABQ) and terapthaloyl chloride monomer through condensation polymerization reaction and the resultant photocatalyst have remarkable performance due to its visible light-harvesting capacity, appropriate band gap, and highly organized π-electron channels. The synthesized photocatalyst is capable to convert dopamine into leucodopaminechrome with a higher yield (77.08%) and also capable to activate the C-H bond between 4-nitrobenzenediazonium tetrafluoroborate and pyrrole.

Adenosine/β-Cyclodextrin-Based Metal-Organic Frameworks as a Potential Material for Cancer Therapy

Recently, researchers have employed metal-organic frameworks (MOFs) for loading pharmaceutically important substances. MOFs are a novel class of porous class of materials formed by the self-assembly of organic ligands and metal ions, creating a network structure. The current investigation effectively achieves the loading of adenosine (ADN) into a metal-organic framework based on cyclodextrin (CD) using a solvent diffusion method. The composite material, referred to as ADN:β-CD-K MOFs, is created by loading ADN into beta-cyclodextrin (β-CD) with the addition of K⁺ salts. This study delves into the detailed examination of the interaction between ADN and β-CD in the form of MOFs. The focus is primarily on investigating the hydrogen bonding interaction and energy parameters through the aid of semi-empirical quantum mechanical computations. The analysis of peaks that are associated with the ADN-loaded ICs (inclusion complexes) within the MOFs indicates that ADN becomes incorporated into a partially amorphous state. Observations from SEM images reveal well-defined crystalline structures within the MOFs. Interestingly, when ADN is absent from the MOFs, smaller and irregularly shaped crystals are formed. This could potentially be attributed to the MOF manufacturing process. Furthermore, this study explores the additional cross-linking of β-CD with K through the coupling of -OH on the β-CD-K MOFs. The findings corroborate the results obtained from FT-IR analysis, suggesting that β-CD plays a crucial role as a seed in the creation of β-CD-K MOFs. Furthermore, the cytotoxicity of the MOFs is assessed in vitro using MDA-MB-231 cells (human breast cancer cells).

Synthesis and Peroxide Activation Mechanism of Bimetallic MOF for Water Contaminant Degradation: A Review

Metal-organic framework (MOF) materials possess a large specific surface area, high porosity, and atomically dispersed metal active sites, which confer excellent catalytic performance as peroxide (peroxodisulfate (PDS), peroxomonosulfate (PMS), and hydrogen peroxide (H₂O₂)) activation catalysts. However, the limited electron transfer characteristics and chemical stability of traditional monometallic MOFs restrict their catalytic performance and large-scale application in advanced oxidation reactions. Furthermore, the single-metal active site and uniform charge density distribution of monometallic MOFs result in a fixed activation reaction path of peroxide in the Fenton-like reaction process. To address these limitations, bimetallic MOFs have been developed to improve catalytic activity, stability, and reaction controllability in peroxide activation reactions. Compared with monometallic MOFs, bimetallic MOFs enhance the active site of the material, promote internal electron transfer, and even alter the activation path through the synergistic effect of bimetals. In this review, we systematically summarize the preparation methods of bimetallic MOFs and the mechanism of activating different peroxide systems. Moreover, we discuss the reaction factors that affect the process of peroxide activation. This report aims to expand the understanding of bimetallic MOF synthesis and their catalytic mechanisms in advanced oxidation processes.

Ligand field tuning of d-orbital energies in metal-organic framework clusters

Linker functionalization is a common route used to affect the electronic and catalytic properties of metal-organic frameworks. By either pre- or post-synthetically installing linkages with differing linker moieties the band gap, workfunction, and exciton lifetimes have been shown to be affected. One overlooked aspect of linker functionalization, however, has been the impact on the metal d-orbital energies to which they are bound. The ligand field differences should result in substantial changes in d-splitting. In this study we use density functional theory (DFT) to study the energetics of d-orbital energy tuning as a function of linker chemistry. We offer a general descriptor, linker pK_a, as a tool to predict resultant band energies in metal-organic frameworks (MOFs). Our calculations reveal that simple functionalizations can affect the band energies, of primarily metal d lineage, by up to 2 eV and illustrate the significance of this band modularity using four archetypal MOFs: UiO-66, MIL-125, ZIF-8, and MOF-5. Together, we show that linker functionalization dramatically affects d-energies in MOF clusters and highlight that linker functionalization is a useful route for fine-tuning band edges centered on the metals, rather than linkers themselves.

Ligand Modulation on the Various Structures of Three Zinc(II)-Based Coordination Polymers for Antibiotics Degradation

The efficient removal of organic contaminants from wastewater is, nowadays, a prominent area of study due to its biological as well as environmental significance. Antibiotics are now found in wastewater because of their high use, which has become a source of aquatic pollution. These antibiotics have dangerous implications for people’s health. Hence, effective pharmaceutical removal from wastewater and contaminated water bodies, especially the removal of antibiotics, is of major interest to global research organizations. This is why it is necessary to investigate this class of toxic material in wastewater discharge. We synthesized three different coordination polymers (CPs) in the presence of various assistant carboxylate linkers, namely, [Zn(Hbtc)(dip)]n (1), [Zn4(1,2-bdc)4(dip)4]n (2), and [Zn(1,4-bdc)(dip)]n (3) (3,5-di(1H-imidazol-1-yl)pyridine = dip, 1,3,5-benzenetricarboxylic acid = H3btc, 1,2-benzenedicarboxylic acid = 1,2-H2bdc, and 1,4-benzendicarboxylic acid = 1,4-bdc). These CPs were characterized by using different techniques, including single-crystal X-ray diffraction. The structural studies demonstrated that in 2, there are four Zn(II) centers and both centers are in different coordination environments (Zn2 has distorted tetrahedral geometry, whereas Zn1, Zn3, and Zn4 have square pyramidal geometry). Hirshfeld surfaces analysis revealed that different types of intermolecular interactions (C⋯C, H⋯C, H⋯H, O⋯C, N⋯H, and O⋯H) are present in the synthesized CPs. We examined the different antibiotics, such as metronidazole (MDZ), nitrofurazone (NFZ), dimetridazole (DTZ), sulfasalazine(SLA), and oxytetracycline (OXY), degradation behaviors of the synthesized CPs, which showed remarkable degradation efficiency. 1 showed photocatalytic behavior toward the NFZ antibiotic in an aqueous media. This study also showed that these catalysts are stable and reusable under mild conditions.

Photoexcitation of Fe3 O Nodes in MOF Drives Water Oxidation at pH=1 When Ru Catalyst Is Present

Artificial photosynthesis strives to convert the energy of sunlight into sustainable, eco-friendly solar fuels. However, systems with light-driven water oxidation reaction (WOR) at pH=1 are rare. Broadly used [Ru(bpy)₃ ]²⁺ (bpy=2,2'-bipyridine) photosensitizer has a fixed +1.23 V potential which is insufficient to drive most water oxidation catalysts (WOCs) in acid, while Fe₂ O₃ , featuring the highly oxidizing holes, is not stable at low pH. Here, the key examples of Fe-based metal-organic framework (MOF) water oxidation photoelectrocatalysts active at pH=1 are presented. Fe-MIL-126 and Fe MOF-dcbpy structures were formed with 4,4'-biphenyl dicarboxylate (bpdc), 2,2'-bipyridine-5,5'-dicarboxylate (dcbpy) linkers and their mixtures. Presence of dcbpy linkers allows integration of metal-based catalysts via coordination to 2,2'-bipyridine fragments. Fe-based MOFs were doped with Ru-based precursors to achieve highly active MOFs bearing [Ru(bpy)(dcbpy)(H₂ O)₂ ]²⁺ WOC. Materials were analyzed with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infra-red (FTIR) spectroscopy, resonance Raman, X-ray absorption spectroscopy, fs optical pump-probe, electron paramagnetic resonance (EPR), diffuse reflectance and electric conductivity measurements and were modeled by band structure calculations. It is shown that under reaction conditions, Fe^III and Ru^III oxidation states are present, indicating rate-limiting electron transfer in MOF. Fe₃ O nodes emerge as photosensitizers able to drive prolonged O₂ evolution in acid. Further developments are possible via MOF's linker modification for enhanced light absorption, electrical conductivity, reduced MOF solubility in acid, Ru-WOC modification for faster WOC catalysis, or Ru-WOC substitution to 3d metal-based systems. The findings give further insight for development of light-driven water splitting systems based on Earth-abundant metals.

Inter-Network Charge-Transfer Excited State Formation Within a Two-fold Catenated Metal-Organic Framework

Charge-transfer excited state (CTES) defines the ability to split photon energy into work producing redox equivalents suitable for photocatalysis. Here, we report inter-net CTES formation within a two-fold catenated crystalline metal-organic framework (MOF), constructed with two linkers, N,N'-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide (DPNDI) and 2,6-dicarboxynaphthalene (NDC). The structural flexibility puts two complementary linkers from two nets in a proximal position to interact strongly. Supported by the electrochemical and steady-state electronic spectroscopic data, this ground-state interaction facilitates forming CTES that can be populated by direct excitation. We map the dynamics of the CTES which persists over a few nanoseconds and highlight the utilities of such relatively long-lived CTES as enhanced conductivity of the MOF under light over that measured in dark and as a proof-of-the-principle test, photo-reduction of methyl viologen under white light.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Towards Solving the PFAS Problem: The Potential Role of Metal-Organic Frameworks

Per- and polyfluoroalkyl substances (PFAS) are a group of recalcitrant molecules that have been used since the 1940s in a variety of applications. They are now linked to a host of negative health outcomes and are extremely resistant to degradation under environmental conditions. Currently, membrane technologies or adsorbents are used to remediate contaminated water. These techniques are either inefficient at capturing smaller PFAS molecules, have high energy demands, or result in concentrated waste that must be incinerated at high temperatures. This Review focuses on what role metal-organic frameworks (MOFs) may play in addressing the PFAS problem. Specifically, how the unique properties of MOFs such as their well-defined pore sizes, ultra-high internal surface area, and tunable surface chemistry may be a sustainable solution for PFAS contamination.

Photo-induced reversible nitric oxide capture by Fe-M(CO2H)4 (M = Co, Ni, Cu) as a building block of mixed-metal BTC-based MOFs

Metal-organic frameworks incorporating mixed-metal sites (MM-MOFs) have emerged as promising candidates in the development of sensing platforms for the detection of paramagnetic species. In this context, the present study explores the photo-induced switching behavior of mixed-metal Fe-M (M = Co, Ni, Cu) formate (Fe-M(CO₂H)₄), as an experimentally feasible strategy for the reversible capture of nitric oxide (NO). Using Fe-M(CO₂H)₄ as a building block of synthesized MOFs based on BTC (benzene-1,3,5-tricarboxylic acid), molecular simulations of NO adsorption on Fe-M(CO₂H)₄ were conducted to provide a template for evaluating the behavior of BTC-based MOFs towards NO. Accordingly, the relationship between the magnetic properties and adsorption behaviors of Fe-M(CO₂H)₄ towards NO gas molecules was evaluated before and after photoexcitation. We show that the photo-induced effect on the magnetic properties of Fe-M(CO₂H)₄ changes the interaction strength between NO and the Fe-M(CO₂H)₄ systems. NO chemisorption over Fe-Ni(CO₂H)₄ indicates that nickel-doped Fe-BTC MOFs can be efficiently applied for capturing purposes. Moreover, our calculations show a switching behavior between physisorption and chemisorption of the NO molecules over Fe-Co(CO₂H)₄, occurring through magnetic modulation under UV-Vis irradiation. As far as we know, this is the first study that proposes light-controlled reversible NO capture using MOFs. The present study provides a promising platform for reversible NO capture using MM-MOF-incorporated BTC building blocks.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Highly Effective OER Electrocatalysts Generated from a Two-Dimensional Metal-Organic Framework Including a Sulfur-Containing Linker without Doping

Metal-organic frameworks (MOFs) with different topologies formed by the self-assembly of sulfur-containing inorganic ligands, cobalt ions, and large ligands can be used to prepare electrocatalysts for water splitting in order to fully explore the advantages of MOFs in terms of structural tailoring and quantitative assembly. It is possible to avoid using an extradoped sulfur source to reduce waste as well as to disperse Co and sulfur elements evenly and controllably throughout the final material to maximize the overall synergistic effect. In this work, different kinds of bimetallic MOF materials containing sulfur can be synthesized very conveniently by using an economical and practical diffusion method. These materials are directly used as OER electrocatalysts, and the bimetallic MOFs have the best electrocatalytic performance when the ratio of Co to Fe is 6:4. The overpotential at a current density of 10 mA cm^-2 was 260 mV, with a Tafel slope of 56 mV dec^-1 and good stability. It was assembled with 20% commercial Pt/C material into a two-electrode system for all-water decomposition, and the decomposition voltage at 10 mA cm^-2 was 1.81 V. From the electronic configuration microscopic point of view, the introduction of iron ions changed the original synergistic effect for Co-S-Co, which more easily led to the formation of high-valence Co³⁺ and finally produced highly active electrocatalytic sites. From a macroscopic point of view, the material produced in situ during the electrochemical reaction process not only retains the original 2D layered structure but also utilizes bubbles to produce a loose structure with defective sites. These structural features are advantageous because they provide not only an abundance of active sites and permeable channels but also the necessary interfaces and electron-transport channels for the formation of electrostatic charge-separation layers, making it easier to intercalate and delaminate the hydroxide ions. Furthermore, the changed hydroxyl ions and nitrogen and sulfur atoms on the channel surface may operate as interaction sites, increasing the surface characteristics, facilitating electron transfer, and reducing electron-transfer resistance. To summarize, the rational design of sulfur-containing layered MOF materials directly as water-splitting catalysts is a crucial next step in developing cost-effective, environmentally friendly, and low-energy-consumption electrocatalysts based on the findings of this study.

In situ preparation of a Co4S3-based electrocatalyst by taking advantage of the controllable components of metal-organic frameworks

In order to give full play to the advantages in structure tailoring and quantitative assembly, metal-organic frameworks (MOFs) with different topological structures formed by the self-assembly of inorganic ligands containing sulfur, cobalt ions and large-size ligands were used to prepare electrocatalyst materials for hydrolysis with controllable composition and performance. According to the synthesis proposition, we can not only avoid using additional doped sulfur sources to reduce waste but also make it very convenient for Co and sulfur elements to be uniformly and controllably distributed in the whole material, and enhance the overall synergistic effects. Based on the above considerations, two-dimensional layered and three-dimensional MOFs, Co-MOF-1, and Co-MOF-2, with the same chemical compositions were utilized as the templates, and a series of Co/S-based materials with variable compositions and properties were obtained only by controlling the pyrolysis temperature. For each MOF series, it can be observed that with the increase in the pyrolysis temperature, the derivatives gradually change from Co₄S₃ to Co₉S₈ composites, which could be proven by PXRD studies. The electrocatalytic properties of two series of derivatives were also investigated, and the results indicate that the materials containing Co₄S₃ can indeed show better water-splitting performance than Co₉S₈ ones. Furthermore, the macroscopic stacking form of the MOF template also plays an important role in determining the electrocatalytic performance of the derived materials. Through an overall comparison, it is found that the electrocatalytic performance of the Co-MOF-1 series is better than that of the Co-MOF-2 series at various temperatures, which should be only caused by the natural packing modes of the pristine MOF template. For Co-MOF-1 derivatives, the retention of the two-dimensional layered structure is favorable to form an electrostatic charge separation layer and electron transport channel, which is beneficial to the intercalation and delamination of hydroxide ions, thus improving the storage capacity of materials, promoting electron transfer, and producing less electron transfer resistance. Therefore, based on the research results, the reasonable design of layered MOF materials containing the specific sulfur-containing linker as water-splitting catalysts is an applicable route for the preparation of economical, environmentally friendly, and low energy consumption electrocatalysts, which should receive increasing attention in the future.

Application of aluminosilicate clay mineral-based composites in photocatalysis

Aluminosilicate clay mineral (ACM) is a kind of typical raw materials that used widely in manufacturing industry owing to the abundant reserve and low-cost exploring. In past two decades, in-depth understanding on unique layered structure and abundant surface properties endows ACM in the emerging research and application fields. In field of solar-chemical energy conversion, ACM has been widely used to support various semiconductor photocatalysts, forming the composites and achieving efficient conversion of reactants under sunlight irradiation. To date, classic ACM such as kaolinite and montmorillonite, loaded with semiconductor photocatalysts has been widely applied in photocatalysis. This review summaries the recent works on ACM-based composites in photocatalysis. Focusing on the properties of surface and layered structure, we elucidate the different features in the composition with various functional photocatalysts on two typical kinds of ACM, i.e., type 1:1 and type 2:1. Not only large surface area and active surface hydroxyl group assist the substrate adsorption, but also the layered structure provides more space to enlarge the application of ACM-based photocatalysts. Besides, we overview the modifications on ACM from both external surface and the inter-layer space that make the formation of composites more efficiently and boost the photo-chemical process. This review could inspire more upcoming design and synthesis for ACM-based photocatalysts, leading this kind of economic and eco-friendly materials for more practical application in the future.

Growth of Fe-BDC Metal Organic Frameworks onto functionalized Si (111) surfaces

The realization of metal organic frameworks (MOFs) layers onto solid surfaces is a prerequisite for their integration into devices. This work reports the direct growth of Fe 3+ / benzene di-carboxylate MOFs onto functionalized silicon surfaces, compatible with a wide range of MOF synthesis conditions. The co-nucleation and growth of different crystalline phases are evidenced, whose coverage depends on the surface chemistry and/or the solution composition. Three structural phases - the cubic MIL-101(Fe), a hexagonal phase with a structure close to MOF-235 and a MIL-53(Fe) with a monoclinic symmetry - were identified through characteristic crystal shapes and their structural parameters inferred from X-Ray Diffraction. In addition to the oriented growth of 3D crystallites, the formation of two-dimensional MIL-101 nano-crystallites or thin layers/islands exhibiting extended monocrystalline domains with (111) texture is also demonstrated through high-resolution Atomic Force Microscopy. Post-synthesis treatments reveal a weak adhesion of the hexagonal phase indicating a different surface anchoring.

Synthesis of a Spatially Confined, Highly Durable, and Fully Exposed Pd Cluster Catalyst via Sequential Site-Selective Atomic Layer Deposition

Bottom-up synthesis based on site-selective atomic layer deposition is a powerful atomic-scale processing approach to fabricate materials with desired functionalities. Typical selective atomic layer deposition (ALD) can be achieved using selective activation of a growth area or selective deactivation of a protected area. In this work, we explored the site selectivity based on the difference of the inherent surface reactivity between different materials and within the same materials. By sequentially applying two site-selective atomic layer deposition, the ALD Pd catalyst is spatially confined on ALD SnO₂ modified h-BN substrate Pd/SnO₂/h-BN shows improved catalytic activity and stability due to strong metal-support interactions and spatial confinement. The results reveal that sequential site-selective ALD is a feasible and effective synthesis strategy that provides an attractive path toward designing and developing highly stable catalysts.