Mechanistic Studies of the Water–Gas Shift Reaction over Pt/CexZr1–xO2 Catalysts: The Effect of Pt Particle Size and Zr Dopant

Electronic Structure of Heteronuclear Cerium-Platinum Clusters

Beyond the now well-known strong catalyst-support interactions reported for ceria-supported platinum catalysts, intermetallic Ce-Pt compounds exhibit fascinating properties such as heavy fermion behavior and magnetic instability. Small heterometallic Ce-Pt clusters, which can provide insights into the local features that govern bulk phenomena, have been less explored. Herein, the anion photoelectron spectra of three small mixed Ce-Pt clusters, Ce2OPt-, Ce2Pt-, and Ce3Pt-, are presented and interpreted with supporting density functional theory calculations. The calculations, which are readily reconciled with the experimental spectra, suggest the presence of numerous close-lying spin states, including states in which the Ce 4f electrons are ferromagnetically coupled or antiferromagnetically coupled. The Pt center is consistently in a nominal -2 charge state in all cluster neutrals and anions, giving the Ce-Pt bond ionic character. Ce-Pt bonds are stronger than Ce-Ce bonds, and the O atom in Ce2OPt- coordinates only with the Ce centers. The energy of the singly occupied Ce-local 4f orbitals relative to the Pt-local orbitals changes with cluster composition. Discussion of the results includes potential implications for Ce-rich intermetallic materials.

Heterostructured Ceria-Titania-Supported Platinum Catalysts for the Water Gas Shift Reaction

The water gas shift (WGS) reaction is a key process in the industrial hydrogen production and the development and application of the proton exchange membrane fuel cell. Metal oxide-supported highly dispersed Pt has been proved as an efficient catalyst for the WGS reaction. In this work, a series of supported 0.5Pt/xCe-10Ti (x = 1, 3, or 5) catalysts with different Ce/Ti molar ratios were prepared by a simple deposition-precipitation method. Compared with single TiO₂- or CeO₂-supported Pt catalysts, it was found that the 0.5Pt/3Ce-10Ti catalyst showed an obvious advantage in activity for the WGS reaction. In this catalyst, dispersed CeO₂ nanoparticles were supported on the TiO₂ sheets, and Pt single atoms and nanoparticles were located on CeO₂ and at the boundary of TiO₂ and CeO₂, respectively. It found that the reduction ability of the supported Pt catalyst was remarkably improved; meanwhile, the adsorption strength of CO on the surface of 0.5Pt/3Ce-10Ti was moderate. The heterostructured CeO₂-TiO₂ support gave an effective regulation on the Pt status and further influenced the CO adsorption ability, inducing excellent WGS reaction activity. This work provides a reference for the development and application of heterostructured materials in heterogeneous catalysis.

Noble-metal based single-atom catalysts for the water-gas shift reaction

Single-atom catalysts (SACs) have attracted great attention in heterogeneous catalysis. In this Feature Article, we summarize the recent advances of typical Au and Pt-group-metal (PGM) based SACs and their applications in the water-gas shift (WGS) reaction in the past two decades. First, oxide and carbide supported single atoms are categorized. Then, the active sites in the WGS reaction are identified and discussed, with SACs as the positive state or metallic state. After that, the reaction mechanisms of the WGS are presented, which are classified into two categories of redox mechanism and associative mechanism. Finally, the challenges and opportunities in this emerging field for the collection of hydrogen are proposed on the basis of current developments. It is believed that more and more exciting findings based on SACs are forthcoming.

Au and Pt Remain Unoxidized on a CeO2-Based Catalyst during the Water-Gas Shift Reaction

The active forms of Au and Pt in CeO₂-based catalysts for the water-gas shift (WGS) reaction are an issue that remains unclear, although it has been widely studied. On one hand, ionic species might be responsible for weakening the Ce-O bonds, thus increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt atoms with CeO₂ oxygen vacancies at the metal-CeO₂ interface might provide the active sites for an efficient reaction. In this work, using in situ X-ray absorption spectroscopy, we demonstrate that both Au and Pt remain unoxidized during the reaction. Remarkable differences involving the dynamics established by both species under WGS atmospheres were recognized. For the prereduced Pt catalyst, the increase of the conversion coincided with a restructuration of the Pt atoms into cuboctahedrical metallic particles without significant variations on the overall particle size. Contrary to the relatively static behavior of Pt⁰, Au⁰ nanoparticles exhibited a sequence of particle splitting and agglomeration while maintaining a zero oxidation state despite not being located in a metallic environment during the process. High WGS activity was obtained when Au atoms were surrounded by oxygen. The fact that Au preserves its unoxidized state indicates that the chemical interaction between Au and oxygen must be necessarily electrostatic and that such an electrostatic interaction is fundamental for a top performance in the WGS process.

Dynamic structure of active sites in ceria-supported Pt catalysts for the water gas shift reaction

Oxide-supported noble metal catalysts have been extensively studied for decades for the water gas shift (WGS) reaction, a catalytic transformation central to a host of large volume processes that variously utilize or produce hydrogen. There remains considerable uncertainty as to how the specific features of the active metal-support interfacial bonding—perhaps most importantly the temporal dynamic changes occurring therein—serve to enable high activity and selectivity. Here we report the dynamic characteristics of a Pt/CeO₂ system at the atomic level for the WGS reaction and specifically reveal the synergistic effects of metal-support bonding at the perimeter region. We find that the perimeter Pt⁰ − O vacancy−Ce³⁺ sites are formed in the active structure, transformed at working temperatures and their appearance regulates the adsorbate behaviors. We find that the dynamic nature of this site is a key mechanistic step for the WGS reaction.

Revealing the structure and dynamics of active sites is essential to understand catalytic mechanisms. Here the authors demonstrate the dynamic nature of perimeter Pt⁰−O vacancy−Ce³⁺ sites in Pt/CeO₂ and the key effects of their dynamics on the mechanism of the water gas shift reaction.

Low Temperature Water-Gas Shift: Enhancing Stability through Optimizing Rb Loading on Pt/ZrO2

Recent studies have shown that appropriate levels of alkali promotion can significantly improve the rate of low-temperature water gas shift (LT-WGS) on a range of catalysts. At sufficient loadings, the alkali metal can weaken the formate C–H bond and promote formate dehydrogenation, which is the proposed rate determining step in the formate associative mechanism. In a continuation of these studies, the effect of Rb promotion on Pt/ZrO2 is examined herein. Pt/ZrO2 catalysts were prepared with several different Rb loadings and characterized using temperature programmed reduction mass spectrometry (TPR-MS), temperature programmed desorption (TPD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), an X-ray absorption near edge spectroscopy (XANES) difference procedure, extended X-ray absorption fine structure spectroscopy (EXAFS) fitting, TPR-EXAFS/XANES, and reactor testing. At loadings of 2.79% Rb or higher, a significant shift was seen in the formate ν(CH) band. The results showed that a Rb loading of 4.65%, significantly improves the rate of formate decomposition in the presence of steam via weakening the formate C–H bond. However, excessive rubidium loading led to the increase in stability of a second intermediate, carbonate and inhibited hydrogen transfer reactions on Pt through surface blocking and accelerated agglomeration during catalyst activation. Optimal catalytic performance was achieved with loadings in the range of 0.55–0.93% Rb, where the catalyst maintained high activity and exhibited higher stability in comparison with the unpromoted catalyst.

Conversion of syngas into light olefins over bifunctional ZnCeZrO/SAPO-34 catalysts: regulation of the surface oxygen vacancy concentration and its relation to the catalytic performance

Surface oxygen vacancies can improve the formation of methanol intermediates and promote their evolution into olefin products for syngas-to-olefins over Zn_0.5CeZrO_x/SAPO-34.

Elucidation of Water Promoter Effect of Proton Conductor in WGS Reaction over Pt-Based Catalyst: An Operando DRIFTS Study

A conventional Pt/CeO2/Al2O3 catalyst physically mixed with an ionic conductor (Mo- or Eu-doped ZrO2) was tested at high space velocity (20,000 h−1 and 80 L h−1 gcat−1) under model conditions (only with CO and H2O) and industrial conditions, with a realistic feed. The promoted system with the ionic conductor physically mixed showed better catalytic activity associated with better water dissociation and mobility, considered as a rate-determining step. The water activation was assessed by operando diffuse reflectance infrared fourier transformed spectroscopy (DRIFTS) studies under reaction conditions and the Mo-containing ionic conductor exhibited the presence of both dissociated (3724 cm−1) and physisorbed (5239 cm−1) water on the Eu-doped ZrO2 solid solution, which supports the appearance of proton conductivity by Grotthuss mechanism. Moreover, the band at 3633 cm−1 ascribed to hydrated Mo oxide, which increases with the temperature, explains the increase of catalytic activity when the physical mixture was used in a water gas shift (WGS) reaction.

Platinum Based Catalysts in the Water Gas Shift Reaction: Recent Advances

The water gas shift (WGS) is an equilibrium exothermic reaction, whose corresponding industrial process is normally carried out in two adiabatic stages, to overcome the thermodynamic and kinetic limitations. The high temperature stage makes use of iron/chromium-based catalysts, while the low temperature stage employs copper/zinc-based catalysts. Nevertheless, both these systems have several problems, mainly dealing with safety issues and process efficiency. Accordingly, in the last decade abundant researches have been focused on the study of alternative catalytic systems. The best performances have been obtained with noble metal-based catalysts, among which, platinum-based formulations showed a good compromise between performance and ease of preparation. These catalytic systems are extremely attractive, as they have numerous advantages, including the feasibility of intermediate temperature (250–400 °C) applications, the absence of pyrophoricity, and the high activity even at low loadings. The particle size plays a crucial role in determining their catalytic activity, enhancing the performance of the nanometric catalytic systems: the best activity and stability was reported for particle sizes < 1.7 nm. Moreover the optimal Pt loading seems to be located near 1 wt%, as well as the optimal Pt coverage was identified in 0.25 ML. Kinetics and mechanisms studies highlighted the low energy activation of Pt/Mo2C-based catalytic systems (Ea of 38 kJ·mol−1), the associative mechanism is the most encountered on the investigated studies. This review focuses on a selection of recent published articles, related to the preparation and use of unstructured platinum-based catalysts in water gas shift reaction, and is organized in five main sections: comparative studies, kinetics, reaction mechanisms, sour WGS and electrochemical promotion. Each section is divided in paragraphs, at the end of the section a summary and a summary table are provided.

The catalytic mechanism of the Au@TiO2−x/ZnO catalyst towards a low-temperature water-gas shift reaction

A redox mechanism towards the water-gas shift reaction was certified based on in situ/operando experiments and density functional theory calculation studies.

Efficient catalytic hydrogen generation by intermetallic platinum-lead nanostructures with highly tunable porous feature

The water-gas shift (WGS) reaction is an essential industrial reaction for upgrading hydrogen (H₂) by removing carbon monoxide (CO), while highly efficient platinum (Pt)-based catalysts for WGS with simultaneously high activity and stability are still yet to be developed due to the poisoning issue during the reaction. Herein, we report on the porous PtPb peanut nanocrystals (porous PtPb PNCs) and porous PtPb octahedron nanocrystals (porous PtPb ONCs) with controllable ratios of Pt/Pb as extremely active and stable catalysts towards WGS reaction. It exhibits the composition-dependent activity with porous PtPb PNCs-40/ZnO being the most active for WGS to H₂, 16.9 times higher than that of the commercial Pt/C. The porous PtPb PNCs-40/ZnO also display outstanding durability with barely activity decay and negligible structure and composition changes after ten successive reaction cycles. X-ray photoelectron spectroscopy (XPS) results reveal that the suitable binding energy of Pt 4f_7/2 and the high ratio of Pt(0) to Pt(II) in porous PtPb PNCs/ZnO and porous PtPb ONCs/ZnO are crucial for the enhanced WGS activity. The CO stripping results indicate the optimized CO adsorption strength on the Pt surface ensure the excellent WGS activity and the outstanding durability. The present work demonstrates an important advance in tuning the porous metal nanomaterials as highly efficient and durable catalysts for catalysis, energy conversion and beyond.

Metal Micro-Monoliths for the Kinetic Study and the Intensification of the Water Gas Shift Reaction

A kinetic study of the water gas shift (WGS) reaction has been carried out on a Pt-based catalyst promoted by a Zr-based proton conductor. The investigation was first performed on powders with diluted feed mixtures and then extended to more severe and representative conditions by using a catalyst coated metallic micromonolith. Temperature measurements reveal that isothermal conditions were obtained along the micromonolith during the tested conditions. In addition, the very thin catalytic layer allows for the discarding of intraporous resistances, providing excellent conditions to analyse the kinetics of the WGS reaction under the integral regime. The proposed rate expression accounts for independence on CO concentration, an inhibiting effect of H2 and a promoting effect of H2O; kinetic orders on CO and H2 are in line with those reported in the literature for the Pt-based catalyst. Instead, the obtained reaction order of water (0.36) is significantly lower than that reported for unpromoted catalysts (typically 0.77–1.10) in good agreement with the proposed water-enhancer effect of the proton conductor on the rate-limiting step. Metallic micromonoliths turn out to be a powerful tool for the kinetic investigation, due to the absence of mass and heat transport limitations and represent a strategy for the intensification of the WGS unit for future applications of fuel processors in small mobile devices.

Insights into Interfacial Synergistic Catalysis over Ni@TiO2- x Catalyst toward Water-Gas Shift Reaction

The mechanism on interfacial synergistic catalysis for supported metal catalysts has long been explored and investigated in several important heterogeneous catalytic processes (e.g., water-gas shift (WGS) reaction). The modulation of metal-support interactions imposes a substantial influence on activity and selectivity of catalytic reaction, as a result of the geometric/electronic structure of interfacial sites. Although great efforts have validated the key role of interfacial sites in WGS over metal catalysts supported on reducible oxides, direct evidence at the atomic level is lacking and the mechanism of interfacial synergistic catalysis is still ambiguous. Herein, Ni nanoparticles supported on TiO_{2- x} (denoted as Ni@TiO_{2- x}) were fabricated via a structure topotactic transformation of NiTi-layered double hydroxide (NiTi-LDHs) precursor, which showed excellent catalytic performance for WGS reaction. In situ microscopy was carried out to reveal the partially encapsulated structure of Ni@TiO_{2- x} catalyst. A combination study including in situ and operando EXAFS, in situ DRIFTS spectra combined with TPSR measurements substantiates a new redox mechanism based on interfacial synergistic catalysis. Notably, interfacial Ni species (electron-enriched Ni^δ- site) participates in the dissociation of H₂O molecule to generate H₂, accompanied by the oxidation of Ni^δ--O _v-Ti³⁺ (O _v: oxygen vacancy) to Ni^δ+-O-Ti⁴⁺ structure. Density functional theory calculations further verify that the interfacial sites of Ni@TiO_{2- x} catalyst serve as the optimal active site with the lowest activation energy barrier (∼0.35 eV) for water dissociation. This work provides a fundamental understanding on interfacial synergistic catalysis toward WGS reaction, which is constructive for the rational design and fabrication of high activity heterogeneous catalysts.

DFT Prediction of Enhanced Reducibility of Monoclinic Zirconia upon Rhodium Deposition

Oxides are an important class of materials and are widely used, for example, as supports in heterogeneous catalysis. In a number of industrial catalytic processes, oxide supports actively participate in chemical transformations by releasing lattice oxygen anions. While this is intuitively understood for reducible oxides, the reducibility of irreducible oxides may be modified via nanoengineering or upon inclusion of foreign species. Our calculations predict that the ability of irreducible monoclinic zirconia to release oxygen improves substantially upon deposition of rhodium. Through a comprehensive screening of Rh/ZrO₂ with different size of the rhodium species, we find that a Rh adatom and a Rh₄ nanocluster have the largest impact on the reducibility of zirconia. With increasing size the effect of rhodium decays. Our findings demonstrate that the phenomenon of enhanced reducibility of irreducible oxides in the presence of metals should be considered when interpreting experimental and computational results, as reactions that involve release of oxygen from an oxide support might be possible for irreducible oxides.

Enhanced oxygen storage capacity of cation-ordered cerium–zirconium oxide induced by titanium substitution

Cation-ordered Ce_0.5Zr_0.4Ti_0.1O₂ with a high oxygen storage capacity (1310 μmol-O per g at 200 °C) was synthesized via a solution combustion method.

Investigation on CO catalytic oxidation reaction kinetics of faceted perovskite nanostructures loaded with Pt

Perovskite lead titanate nanostructures with specific {111}, {100} and {001} facets exposed, have been employed as supports to investigate the crystal facet effect on the growth and CO catalytic activity of Pt nanoparticles.

Deep insight into Zr/Fe combination for successful Pt/CeO2/Al2O3 WGS catalyst doping

Efficient promotion of the Pt/CeO₂/Al₂O₃ catalytic system was achieved by the addition of two different ceria promoters, Zr and Fe.