Photocatalytic CO2 Reduction and Surface Immobilization of a Tricarbonyl Re(I) Compound Modified with Amide Groups

Solar CO2 reduction using a molecular Re(I) catalyst grafted on SiO2via amide and alkyl amine linkages

Heterogenized molecular catalysts have shown interesting activities in different chemical transformations. In our previous studies, a molecular catalyst, Re(bpy)(CO)3Cl where bpy is 2,2'-bipyridine, was covalently attached to silica surfaces via an amide linkage for use in photocatalytic CO2 reduction. Derivatizing the bpy ligand with electron-withdrawing amide groups led to detrimental effects on the catalytic activity of Re(bpy)(CO)3Cl. In this study, an alkyl amine linkage is utilized to attach Re(bpy)(CO)3Cl onto SiO2 in order to eliminate the detrimental effects of the amide linkage by breaking the conjugation between the bpy ligand and the amide group. However, the heterogenized Re(I) catalyst containing the alkyl amine linkage demonstrates even lower activity than the one containing the amide linkage in photocatalytic CO2 reduction. Infrared studies suggest that the presence of the basic amine group led to the formation of a photocatalytically inactive Re(I)-OH species on SiO2. Furthermore, the amine group likely contributes to the stabilization of a surface Re(I)-carboxylato species formed upon light irradiation, resulting in the low activity of the heterogenized Re(I) catalyst containing the alkyl amine linkage.

An intelligent "chemical tongue" for high-order monitoring ATP-related physiological phosphates and ATP hydrolysis through diverse transduction principles

For discriminating diverse analytes and monitoring a specific chemical reaction, the emerging multi-channel "chemical nose/tongue" is challenging multi-material "chemical nose/tongue". The former contributes greatly to integrating different transduction principles from a single sensing material, avoiding the need for complex design, high cost, and tedious operation involved with the latter. Therefore, this high-order sensing puts a particular emphasis on the effects of encapsulation. Herein, the plasmonic gold nanoparticles (Au NPs) are encapsulated as a core into the fluorescent guanine monophosphate-Tb3+ infinite coordination polymer nanoparticles (GMP-Tb ICPs) to obtain a core-shell nanocomposite named Au NPs@GMP-Tb ICPs. Hence, a dual-channel "chemical tongue" based on Au NPs@GMP-Tb ICPs is present to realize high-order sensing of adenosine triphosphate (ATP)-related physiological phosphates and the monitoring of ATP hydrolysis. Considering the affinity of Tb3+ towards P-O bonds, four inorganic phosphates and three nucleotide phosphates with different phosphate group numbers and steric hindrance effect directly regulate two stimulus responses (fluorescence intensity and UV-vis absorbance) of Au NPs@GMP-Tb ICPs. Robust statistical methods, such as linear discriminant analysis and hierarchical cluster analysis, are used to recognize each phosphate by the developed sensor array either in the aqueous solution or in complex media such as serum, together with efficiently monitored ATP hydrolysis at different intervals. These findings and blind test clarify that the designed "chemical tongue" guarantees interference resistance and strengthens analytical capacity, together with offering valuable insight into "lab-on-a-nanoparticle" development for monitoring specific chemical reactions.

Ultra-stable fully-aromatic microporous polyamide membrane for molecular sieving of nitrogen over volatile organic compound

Microporous polymer membranes are promising candidates for industrial membrane-based gas separation because of their high separation performance. However, their relatively low stability due to the local rearrangement of polymer chains during usage remains a problem. Hence, we propose the construction of a fully aromatic polymer structure in a microporous polymer membrane to enhance membrane stability. Four triptycene-based microporous polyamides were synthesized via the polymerization of 2,6,14-triaminotriptycene with aromatic acyl chloride and/or aliphatic acyl chlorides. Their properties were characterized and compared by using nuclear magnetic resonance (NMR) and Brunauer-Emmett-Teller analyses. The synthesized polyamides were fabricated into composite membranes by employing a solution process; their stability was evaluated for the molecular sieving of nitrogen over volatile organic compounds such as cyclohexane. Low-field NMR and X-ray photoelectron spectroscopy were used to investigate the differences in the properties of membranes with different structures at different times. The results showed that the fully aromatic polyamide membrane made from 2,6,14-triaminotriptycene and aromatic acyl chloride displayed constant rejection (99 %) and nitrogen permeability (approximately 50 Barrer) for the molecular sieving of nitrogen over cyclohexane during 100-d experiments, indicating good stability. This approach paves the way for the industrialization of microporous polymer membranes from a theoretical perspective.

The Facile Synthesis of a Re-Complex Heterogeneous Catalysis System for Enhancing CO2 Photoreduction Activity

fac-Re(2,2'-bipyridine)(CO)₃Cl] (denoted as ReCC) is an efficient molecule-catalyst with high selectivity in the photoreduction of CO₂ to CO in a homogeneous system. However, the two major drawbacks of Re(I) complexes in the homogeneous system, easy degradation and difficult separation, seriously hinder its development in the field of industrial applications. In this paper, we designed and prepared two different Re-complex fixation systems (denoted as ReCC@TiO₂-5 wt% and ReCC-TiO₂-5 wt%) based on TiO₂ gel via the sensitization method and sol-gel method, respectively. Compared with a pure ReCC complex, both of them exhibited excellent photocatalytic reduction activity. In particular, the sol-gel hybrid system (ReCC-TiO₂-5 wt%) displayed outstanding positive synergistic effects on the photocatalytic activity and the long durability of the photocatalytic process. A series of characterizations were carried out to explore the probable photocatalytic reduction process mechanism, which provides the theoretical basis and technical support for the Re complex fixation method.

Manipulating the Reaction Pathway of CO2 Photoreduction via the Microenvironment of a Re Molecular Catalyst

Re molecular complexes incorporated into two metal-organic frameworks were investigated to disclose the host-guest interaction by infrared and ¹H nuclear magnetic resonance and to explore the microenvironment around the Re complex by absorption and photoluminescence spectra. ZIF-8 provides a confined space to isolated Re via an electrostatic interaction, while UiO-66 exerts a relaxed space to accessible Re via a coordination interaction. For CO₂ two-electron photoreduction to CO, the turnover number of 28.6 in Re@ZIF-8 is 10-fold that of 2.7 in Re@UiO-66. The electron transfer is promoted in Re@ZIF-8 by a local electrostatic field with a cross-space pathway, whereas it is retarded in Re@UiO-66 as the solvation shell surrounding Re. In the following CO₂ activation, the charged intermediate species could be stabilized in Re@ZIF-8 by spatial confinement, while Re-triethanolamine adducts prevailed in Re@UiO-66 with the accessibility of the Re complex. This work demonstrates a feasibility of diverting the CO₂ activation pathway by the microenvironment of a molecular catalyst in the field of artificial photosynthesis.

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO)₅Cl to form complexes of the type Re(bpy)(CO)₃Cl, which are related to known catalysts for CO₂ reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO₂ on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO₂ reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. A conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Host-Guest Interactions in a Metal-Organic Framework Isoreticular Series for Molecular Photocatalytic CO2 Reduction

A strategy to improve homogeneous molecular catalyst stability, efficiency, and selectivity is the immobilization on supporting surfaces or within host matrices. Herein, we examine the co‐immobilization of a CO₂ reduction catalyst [ReBr(CO)₃(4,4′‐dcbpy)] and a photosensitizer [Ru(bpy)₂(5,5′‐dcbpy)]Cl₂ using the isoreticular series of metal–organic frameworks (MOFs) UiO‐66, ‐67, and ‐68. Specific host pore size choice enables distinct catalyst and photosensitizer spatial location—either at the outer MOF particle surface or inside the MOF cavities—affecting catalyst stability, electronic communication between reaction center and photosensitizer, and consequently the apparent catalytic rates. These results allow for a rational understanding of an optimized supramolecular layout of catalyst, photosensitizer, and host matrix.

Molecular Dye-Sensitized Photocatalysis with Metal-Organic Framework and Metal Oxide Colloids for Fuel Production

Colloidal dye-sensitized photocatalysis is a promising route toward efficient solar fuel production by merging properties of catalysis, support, light absorption, and electron mediation in one. Metal-organic frameworks (MOFs) are host materials with modular building principles allowing scaffold property tailoring. Herein, we combine these two fields and compare porous Zr-based MOFs UiO-66-NH2(Zr) and UiO-66(Zr) to monoclinic ZrO2 as model colloid hosts with co-immobilized molecular carbon dioxide reduction photocatalyst fac-ReBr(CO)3(4,4′-dcbpy) (dcbpy = dicarboxy-2,2′-bipyridine) and photosensitizer Ru(bpy)2(5,5′-dcbpy)Cl2 (bpy = 2,2′-bipyridine). These host-guest systems demonstrate selective CO2-to-CO reduction in acetonitrile in presence of an electron donor under visible light irradiation, with turnover numbers (TONs) increasing from ZrO2, to UiO-66, and to UiO-66-NH2 in turn. This is attributed to MOF hosts facilitating electron hopping and enhanced CO2 uptake due to their innate porosity. Both of these phenomena are pronounced for UiO-66-NH2(Zr), yielding TONs of 450 which are 2.5 times higher than under MOF-free homogeneous conditions, highlighting synergistic effects between supramolecular photosystem components in dye-sensitized MOFs.

CO2 photoelectroreduction with enhanced ethanol selectivity by high valence rhenium-doped copper oxide composite catalysts

CuO supported catalyst with high valence rhenium doping were specially studied for photoelectrocatalytic reduction of CO₂ to small molecular alcohols, which were synthesized by nitrate thermal decomposition method on anatase TiO₂ nanotube arrays (TiO₂-NTs). Photoelectrochemical measurements indicate that the high valence rhenium doping helps in improving the catalytic activity and selectivity of CuO supported catalysts. For the case of 6 wt% Re-doped CuO/TiO₂-NTs calcined at 723 K, the principal products are methanol and ethanol with yield up to 19.9 μmol and 7.5 μmol after 5 h photoelectrocatalysis at external potential of -0.4 V under simulated solar illumination. In contrast, the products catalyzed by undoped CuO/TiO₂-NTs are only methanol and formaldehyde. These results indicate that the high valence rhenium doping will promote the alcoholization process and benefit the CC coupling, leading to the selective conversion of CO₂ to ethanol. Furthermore, under suitable external potential (-0.5 V) the CO₂ conversion product is almost entirely composed of ethanol.

Immobilization of Mn(i) and Ru(ii) polypyridyl complexes on TiO2 nanoparticles for selective photoreduction of CO2 to formic acid

Under visible irradiation in DMF/TEOA, the hybrid nanomaterial Ru(ii)/TiO₂/Mn(i), lead to the selective reduction of CO₂ into HCOO⁻.

Visible-light degradation of Orange II using an Fe(II)–terpyridine complex grafted onto TiO2 surface

The photo-Fenton process employs light, iron species, and H2O2 to oxidize organic pollutants. In this study, a coordination complex, Fe(II)–terpyridine, was covalently grafted onto TiO2 surfaces via a light-harvesting linkage for use in the photo-Fenton reaction. The surface Fe(II)–terpyridine complex was characterized with techniques, including microscopy and spectroscopy, and was investigated in the degradation of Orange II in the presence of H2O2. Under visible-light irradiation, slightly higher activity was obtained using the surface Fe(II)–terpyridine catalyst than using photoactivated TiO2 nanoparticles under UV light. Furthermore, the Fe(II)–terpyridine complex grafted on TiO2 showed significantly greater activity than the same complex grafted on ZrO2 in the degradation of Orange II. A possible explanation for this observation was discussed that involves the formation of high valent oxoiron species on TiO2 in the photo-Fenton process.

Coordination chemistry in the design of heterogeneous photocatalysts

Heterogeneous catalysts have been widely used for photocatalysis, which is a highly important process for energy conversion, owing to their merits such as easy separation of catalysts from the reaction products and applicability to continuous chemical industry and recyclability. Yet, homogenous photocatalysis receives tremendous attention as it can offer a higher activity and selectivity with atomically dispersed catalytic sites and tunable light absorption. For this reason, there is a major trend to combine the advantages of both homogeneous and heterogeneous photocatalysts, in which coordination chemistry plays a role as the bridge. In this article, we aim to provide the first systematic review to give a clear picture of the recent progress from taking advantage of coordination chemistry. We specifically summarize the role of coordination chemistry as a versatile tool to engineer catalytically active sites, tune light harvesting and maneuver charge kinetics in heterogeneous photocatalysis. We then elaborate on the common fundamentals behind various materials systems, together with key spectroscopic characterization techniques and remaining challenges in this field. The typical applications of coordination chemistry in heterogeneous photocatalysis, including proton reduction, water oxidation, carbon dioxide reduction and organic reactions, are highlighted.

Covalent hybrids based on Re(i) tricarbonyl complexes and polypyridine-functionalized polyoxometalate: synthesis, characterization and electronic properties

A series of [Re(CO)₃Br(N^N)] (N^N = substituted 2,2'-bipyridine ligand) complexes based on polypyridine-functionalized Dawson polyoxometalate (1-3) has been synthesized. The new hybrids (4-6) were characterized by various analytical techniques, including absorption, vibrational and luminescence spectroscopies as well as electrochemistry. Both units, the polyoxometalate and the transition metal complex, retain their intrinsic properties. Their combination in the newly prepared hybrids results in improved photosensitization in the high-energy visible region. However, a complete quenching of the emission for the [Re(CO)₃Br(N^N)] complexes is observed due to formation of a charge separated state, Re(ii) - POM^-, as shown by quenching experiments as well as theoretical modelling via DFT.

Electron-Hole-Pair-Induced Vibrational Energy Relaxation of Rhenium Catalysts on Gold Surfaces

A combination of time-resolved vibrational spectroscopy and density functional theory techniques have been applied to study the vibrational energy relaxation dynamics of the Re(4,4'-dicyano-2,2'-bipyridine)(CO)₃Cl (Re(CO)₃Cl) catalyst for CO₂ to CO conversion bound to gold surfaces. The kinetics of vibrational relaxation exhibits a biexponential decay including an ultrafast initial relaxation and complete recovery of the ground vibrational state. Ab initio molecular dynamics simulations and time-dependent perturbation theory reveal the former to be due to vibrational population exchange between CO stretching modes and the latter to be a combination of intramolecular vibrational relaxation (IVR) and electron-hole pair (EHP)-induced energy transfer into the gold substrate. EHP-induced energy transfer from the Re(CO)₃Cl adsorbate into the gold surface occurs on the same time scale as IVR of Re(CO)₃Cl in aprotic solvents. Therefore, it is expected to be particularly relevant to understanding the reduced catalytic activity of the homogeneous catalyst when anchored to a metal surface.

Two New Tetravacant Organometallic Keggin-Type Heteropolyoxomolybdates-Supported Manganese Carbonyl Derivatives

Two novel heteropolyoxomolybdate [XMo₈O₃₁]ⁿ⁻ (X = Ge(1) or P(2)) manganese carbonyl derivatives [(CH₃)₄N]₆H₆{Mn^II(GeMo₈O₃₁)[Mn^I(CO)₃]₂}₂·12H₂O (1) and [(CH₃)₄N]₄H₆{Mn^II(PMo₈O₃₁)[Mn^I(CO)₃]₂}₂·14H₂O (2), have been successfully synthesized and characterized in the solid state by single crystal X-ray diffraction, IR and thermogravimetric analysis, and in solution by UV-Vis spectroscopy and electrochemistry. The two polyoxomolybdate-based organometallic compounds 1 and 2 represent rare examples of transition metal sandwich-based polyoxometalate metal carbonyl derivatives (PMCDs), in which the organic-inorganic hybrids are composed of four Mn(CO)₃⁺ groups symmetrically occupied the tetravacant sites of dimeric heteropolyoxomolybdate {Mn₂(XMo₈O₃₁)₂}ⁿ⁻ through Mn^I-O-Mo bonds. The carbonyl functionalized Mn atoms are octahedrally coordinated via three μ₂-oxygens of the [XMo₈O₃₁]ⁿ⁻ unit and three carbonyl carbon atoms. Interestingly, 1 and 2 form a psedocuboidal ring Mn(CO)₃Mo₃O₁₂ with {Mn(CO)₃}⁺ occupying the three fold axis of the Mo₃O₁₂ octahedral triad. Beside this, the two centrally placed adjacent Mn^II atoms show intramolecular Mn∙∙∙Mn interactions of 3.11 and 3.16 Å in 1 and 2, respectively. Significant n→π* and O···O intermolecular interactions between the orthogonally aligned adjacent carbonyl groups through the overlap of lone-pair electrons on oxygen atoms with the antibonding orbital (π*) of the adjacent carbony carbon atom of the subsequent units in 1 and 2 were observed. The electrochemical properties of the two compounds were also been investigated.

Interferometric 2D Sum Frequency Generation Spectroscopy Reveals Structural Heterogeneity of Catalytic Monolayers on Transparent Materials

Molecular monolayers exhibit structural and dynamical properties that are different from their bulk counterparts due to their interaction with the substrate. Extracting these distinct properties is crucial for a better understanding of processes such as heterogeneous catalysis and interfacial charge transfer. Ultrafast nonlinear spectroscopic techniques such as 2D infrared (2D IR) spectroscopy are powerful tools for understanding molecular dynamics in complex bulk systems. Here, we build on technical advancements in 2D IR and heterodyne-detected sum frequency generation (SFG) spectroscopy to study a CO₂ reduction catalyst on nanostructured TiO₂ with interferometric 2D SFG spectroscopy. Our method combines phase-stable heterodyne detection employing an external local oscillator with a broad-band pump pulse pair to provide the first high spectral and temporal resolution 2D SFG spectra of a transparent material. We determine the overall molecular orientation of the catalyst and find that there is a static structural heterogeneity reflective of different local environments at the surface.

Microwave-assisted deposition of a highly active cobalt catalyst on mesoporous silica for photochemical CO2 reduction

Uniform Co(iii) sites were obtained on the silica surfaces. Thermal treatment under vacuum resulted in significant changes in the properties of the Co(iii) sites.

Photo-reduction of CO2 Using a Rhenium Complex Covalently Supported on a Graphene/TiO2 Composite

One of the promising solutions for decreasing atmospheric CO2 is artificial photosynthesis, in which CO2 can be photoconverted into solar fuels. In this study, a rhenium complex Re(PyBn)(CO)3 Cl (PyBn=1-(2-picolyl)-4-phenyl-1H-1,2,3-triazole) was covalently grafted onto the surface of reduced graphene oxide (rGO). This was further combined with TiO2 to fabricate a novel catalyst composite TiO2 -rGO-Re(PyBn)(CO)3 Cl for CO2 photo-reduction. This hybrid composite demonstrated high selectivity conversion of CO2 into CO under xenon-lamp irradiation. Compared with the unsupported homogeneous catalyst Re(PyBn)(CO)3 Cl, the covalent immobilized catalyst composite TiO2 -rGO-Re(PyBn)(CO)3 Cl enhanced the turnover number six times and significantly improved catalyst stability. During the process of CO2 photo-reduction, intermediate species with lifetimes longer than hundreds of microseconds were observed and the formation of CO products was revealed using timeresolved infrared spectroscopy. A plausible mechanism for CO2 photo-reduction by the TiO2 -rGO-Re(PyBn)(CO)3 Cl catalyst composite has been suggested. The obtained results have implications for the future design of efficient catalyst composites for CO2 photo-conversion.

Covalent Immobilization of a Molecular Catalyst on Cu2O Photocathodes for CO2 Reduction

Sunlight-driven CO2 reduction is a promising way to close the anthropogenic carbon cycle. Integrating light harvester and electrocatalyst functions into a single photoelectrode, which converts solar energy and CO2 directly into reduced carbon species, is under extensive investigation. The immobilization of rhenium-containing CO2 reduction catalysts on the surface of a protected Cu2O-based photocathode allows for the design of a photofunctional unit combining the advantages of molecular catalysts with inorganic photoabsorbers. To achieve large current densities, a nanostructured TiO2 scaffold, processed at low temperature, was deposited on the surface of protected Cu2O photocathodes. This led to a 40-fold enhancement of the catalytic photocurrent as compared to planar devices, resulting in the sunlight-driven evolution of CO at large current densities and with high selectivity. Potentiodynamic and spectroelectrochemical measurements point toward a similar mechanism for the catalyst in the bound and unbound form, whereas no significant production of CO was observed from the scaffold in the absence of a molecular catalyst.

CO2 reduction with Re(i)–NHC compounds: driving selective catalysis with a silicon nanowire photoelectrode

Excellent selectivity was observed in CO₂ reduction using Re(i)–NHC catalysts on a silicon nanowire photoelectrode.

Highly active and selective photochemical reduction of CO2 to CO using molecular-defined cyclopentadienone iron complexes

Highly active and selective visible-light-driven CO₂ reduction to CO catalyzed by well-defined cyclopentadienone iron complexes.

Fluorescence probes for prokaryotic and eukaryotic cells using Re(CO)3+complexes with an electron withdrawing ancillary ligand

Re(CO)₃⁺complexes with an ancillary ligand present an electron withdrawing effect suitable for cell imaging.

2nd coordination sphere controlled electron transfer of iron hangman complexes on electrodes probed by surface enhanced vibrational spectroscopy

Surface enhanced vibrational spectroscopy shows the correlation between electron transfer kinetics and protonation degree of Fe Hangman complexes on electrodes.

Iron hangman complexes exhibit improved catalytic properties regarding O₂ and H₂O₂ reduction, which are attributed to the presence of a proton donating group in defined vicinity of the catalytic metal centre. Surface enhanced resonance Raman (SERR) and IR (SEIRA) spectro-electrochemistry has been applied concomitantly for the first time to analyse such iron hangman porphyrin complexes attached to electrodes in aqueous solution. While the SERR spectra yield information about the redox state of the central iron, the SEIRA spectra show protonation and deprotonation events of the 2^nd coordination sphere. To investigate the influence of a proton active hanging group on the heterogeneous electron transfer between the iron porphyrin and the electrode, two hangman complexes with either an acid or ester functional group were compared. Using time resolved SERR spectroscopy the electron transfer rates of both complexes were determined. Complexes with an acid group showed a slow electron transfer rate at neutral pH that increased significantly at pH 4, while complexes with an ester group exhibited a much faster, but pH independent rate. SEIRA measurements were able to determine directly for the first time a pK_a value of 3.4 of a carboxylic hanging group in the immobilized state that shifted to 5.2 in D₂O buffer solution. The kinetic data showed an increase of the heterogeneous electron transfer rate with the protonation degree of the acid groups. From these results, we propose a PCET which is strongly modulated by the protonation state of the acid hanging group via hydrogen bond interactions.

Improving the photocatalytic reduction of CO2 to CO through immobilisation of a molecular Re catalyst on TiO2

The photocatalytic activity of phosphonated Re complexes, [Re(2,2'-bipyridine-4,4'-bisphosphonic acid) (CO)3(L)] (ReP; L = 3-picoline or bromide) immobilised on TiO2 nanoparticles is reported. The heterogenised Re catalyst on the semiconductor, ReP-TiO2 hybrid, displays an improvement in CO2 reduction photocatalysis. A high turnover number (TON) of 48 molCO molRe(-1) is observed in DMF with the electron donor triethanolamine at λ>420 nm. ReP-TiO2 compares favourably to previously reported homogeneous systems and is the highest TON reported to date for a CO2-reducing Re photocatalyst under visible light irradiation. Photocatalytic CO2 reduction is even observed with ReP-TiO2 at wavelengths of λ>495 nm. Infrared and X-ray photoelectron spectroscopies confirm that an intact ReP catalyst is present on the TiO2 surface before and during catalysis. Transient absorption spectroscopy suggests that the high activity upon heterogenisation is due to an increase in the lifetime of the immobilised anionic Re intermediate (t50% >1 s for ReP-TiO2 compared with t50% = 60 ms for ReP in solution) and immobilisation might also reduce the formation of inactive Re dimers. This study demonstrates that the activity of a homogeneous photocatalyst can be improved through immobilisation on a metal oxide surface by favourably modifying its photochemical kinetics.

High-turnover visible-light photoreduction of CO2 by a Re(i) complex stabilized on dye-sensitized TiO2

Higher photocatalytic CO₂ conversion to CO with a turnover number of 435 was achieved by the ternary dye-sensitized systems comprising a dye/TiO₂/Re platform.