Selective Gas Phase Hydrogenation of p-Chloronitrobenzene over Pd Catalysts: Role of the Support

The Facile Production of p-Chloroaniline Facilitated by an Efficient and Chemoselective Metal-Free N/S Co-Doped Carbon Catalyst

The catalytic hydrogenation of the toxic and harmful p-chloronitrobenzene to produce the value-added p-chloroaniline is an essential reaction for the sustainable chemical industry. Nevertheless, ensuring satisfactory control of its chemoselectivity is a great challenge. In this work, a N/S co-doped metal-free carbon catalyst has been fabricated by using cysteine as a source of C, N, and S. The presence of calcium citrate (porogen agent) in the mixture subjected to pyrolysis provided the carbon with porosity, which permitted us to overcome the issues associated with the loss of heteroatoms during an otherwise necessary activation thermal treatment. Full characterization was carried out and the catalytic performance of the metal-free carbon material was tested in the hydrogenation reaction of p-chloronitrobenzene to selectively produce p-chloroaniline. Full selectivity was obtained but conversion was highly dependent on the introduction of S due to the synergetic effect of S and N heteroatoms. The N/S co-doped carbon (CYSCIT) exhibits a mesoporous architecture which favors mass transfer and a higher doping level, with more exposed N and S doping atoms which act as catalytic sites for the hydrogenation of p-chloronitrobenzene, resulting in enhanced catalytic performance when compared to the N-doped carbon obtained from melamine and calcium citrate (MELCIT) used as a reference.

Regulating Second-Shell Coordination in Cobalt Single-Atom Catalysts toward Highly Selective Hydrogenation

Manipulating the local coordination environment of central metal atoms in single-atom catalysts (SACs) is a powerful strategy to exploit efficient SACs with optimal electronic structures for various applications. Herein, Co-SACs featured by Co single atoms with coordinating S atoms in the second shell dispersed in a nitrogen-doped carbon matrix have been developed toward the selective hydrogenation of halo-nitrobenzene. The location of the S atom in the model Co-SAC is verified through synchrotron-based X-ray absorption spectroscopy and theoretical calculations. The resultant Co-SACs containing second-coordination shell S atoms demonstrate excellent activity and outstanding durability for selective hydrogenation, superior to most precious metal-based catalysts. In situ characterizations and theoretical results verify that high activity and selectivity are attributed to the advantageous formation of the Co-O bond between p-chloronitrobenzene and Co atom at Co1N4-S moieties and the lower free energy and energy barriers of the reaction. Our findings unveil the correlation between the performance and second-shell coordination atom of SACs.

Rational Design and Precise Synthesis of Single-Atom Alloy Catalysts for the Selective Hydrogenation of Nitroarenes

Single-atom alloys (SAAs) have gained increasing prominence in the field of selective hydrogenation reactions due to their uniform distribution of active sites and the unique host-guest metal interactions. Herein, 15 SAAs are constructed to comprehensively elucidate the relationship between host-guest metal interaction and catalytic performance in the selective hydrogenation of 4-nitrostyrene (4-NS) by density functional theory (DFT) calculations. The results demonstrate that the SAAs with strong host-guest metal interactions exhibit a preference for N─O bond cleavage, and the reaction energy barrier of the hydrogenation process is primarily influenced by the host metal. Among them, Ir1Ni SAA stands out as the prime catalyst candidate, showcasing exceptional activity and selectivity. Furthermore, the Ir1Ni SAA is subsequently prepared through precise synthesis techniques and evaluated in the selective hydrogenation of 4-NS to 4-aminostyrene (4-AS). As anticipated, the Ir1Ni SAA demonstrates extraordinary catalytic performance (yield > 96%). In situ FT-IR experiments and DFT calculations further confirmed that the unique host-guest metal interaction at the Ir-Ni interface site of Ir1Ni SAA endows it with excellent 4-NS selective hydrogenation ability. This work provides valuable insights into enhancing the performance of SAAs catalysts in selective hydrogenation reactions by modulating the host-guest metal interactions.

Enhanced hydrodechlorination of 4-chlorophenol through carboxymethylcellulose-modified Pd/Fe nanosuspension synthesized by one-step methods

Palladized iron (Pd/Fe) represents one of the most common modification strategies for nanoscale zero-valent iron (nZVI). Most studies prepared Pd/Fe by reducing iron salts and depositing Pd species on the surface of pre-synthesized nZVI, which can be called the two-step method. In this study, we proposed a one-step method to obtain Pd/Fe by the concurrent formation of Fe0 and Pd0 and investigated the effects of these two methods on 4-chlorophenol (4-CP) removal, with carboxymethylcellulose (CMC) coated as a surface modifier. Results indicated that the one-step method, not only streamlined the synthesis process, but also Pd/Fe-CMCone-step, synthesized by it, exhibited a higher 4-CP removal rate (97.9%) compared to the two-step method material Pd/Fe-CMCtwo-step (82.4%). Electrochemical analyses revealed that the enhanced activity of Pd/Fe-CMCone-step was attributed to its higher electron transfer efficiency and more available reactive species, active adsorbed hydrogen species (Hads*). Detection of intermediate products demonstrated that, under the influence of Pd/Fe-CMCone-step, the main route of 4-CP was through hydrodechlorination (HDC) to form phenol and H* was the main active specie, supported by EPR tests, quenching experiments and product analysis. Additionally, the effects of initial 4-CP concentration, initial pH, O2 concentration, anions such as Cl-, SO42-, HCO3-, and humic acid (HA) were also investigated. In conclusion, the results of this study suggest that Pd/Fe-CMCone-step, synthesized through the one-step method, is a convenient and efficient nZVI-modifying material suitable for the HDC of chlorinated organic compounds.

Highly Efficient Iron-Based Catalyst for Light-Driven Selective Hydrogenation of Nitroarenes

Light-driven hydrogenation of nitro compounds to functionalized amines is of great importance yet a challenge for practical applications, which calls for the development of high-performance, nonprecious photocatalysts and efficient catalytic systems. Herein, we report a high-efficiency Fe3O4@TiO2 photocatalyst via a sol-gel and subsequent pyrolysis strategy, which exhibits desirable photothermal hydrogenation performance of nitro compounds to functionalized amines with the excellent selectivity of >90% exceeding those of the state-of-the-art heterogeneous photocatalysts. Our experimental results and theoretical calculations for the first time reveal that Fe3O4 is the major active phase, and the strong metal-support interaction between Fe3O4 and reducible TiO2 further leads to performance improvement, taking advantage of the enhanced photothermal effect and the improved adsorption for the reactant and hydrazine hydrate. Notably, a variety of halonitrobenzenes and pharmaceutical intermediates can be completely converted to functionalized amines with high selectivities, even in gram-scale reactions. This work provides a new insight into the rational design of nonprecious photo/thermo-catalysts for other catalytic reactions.

Hydrogen Spillover-Accelerated Selective Hydrogenation on WO3 with ppm-Level Pd

Hydrogen spillover from the metal to the support opens a fresh avenue to design dual-active site catalysts for selective hydrogenation. However, very limited knowledge has been obtained to reveal the relationship between the capacity of hydrogen spillover and catalytic performance of hydrogenation. Herein, hydrogen spillover-dependent selective hydrogenation has been demonstrated on WO₃-supported ppm-level Pd (PdHD/WO₃), where the *H species generated and spilled from Pd to WO₃ are readily utilized for addition of a reactant. The WO₃ supports with a hexagonal phase and a suitable oxygen defect concentration can enhance the capacity of hydrogen spillover, significantly accelerating the catalytic activity of PdHD/WO₃. For the hydrogenation of 4-chloronitrobenzene, the PdHD/WO₃ catalysts with the highest capacity of hydrogen spillover yielded a turnover frequency (TOF) of 47,488 h^-1 (33 times higher than that of traditional Pd/C). Meanwhile, benefiting from the hydrogen spillover, the unique adsorption of 4-chloronitrobenzene via the nitro group on the oxygen vacancy of WO₃ guaranteed >99.9% selectivity of 4-chloroaniline during the whole hydrogenation. This work thus helps to create an effective method for fabricating cost-effective nanocatalysts with an extremely low Pd loading for the ideal hydrogenation with extremely high activity and selectivity.

Synthesis of Mesoporous Silica-Supported NiCo Bimetallic Nanocatalysts and Their Enhanced Catalytic Hydrogenation Performance

In this work, mesoporous silica SBA-16-supported NiCo bimetallic nanocatalysts were synthesized by coimpregnation of Ni and Co precursors followed by calcination and reduction, and various characterization techniques confirm the formation of NiCo bimetallic nanostructures in the catalysts. The synthesized NiCo/SBA-16 shows enhanced catalytic performance for hydrogenation of a series of nitroaromatics. Under the reaction conditions of 80 °C and 1.0 MPa of H₂, the yields of aniline for nitrobenzene hydrogenation over NiCo_0.3/SBA-16 can reach more than 99% at 2.0 h. The enhanced catalytic performance can be ascribed to the formation of NiCo bimetallic nanostructures, where the synergistic effect between Ni and Co improves their catalytic activities for hydrogenation of nitroaromatics.

Boosting Catalytic Selectivity through a Precise Spatial Control of Catalysts at Pickering Droplet Interfaces

Exploration of new methodologies to tune catalytic selectivity is a long-sought goal in catalytic community. In this work, oil-water interfaces of Pickering emulsions are developed to effectively regulate catalytic selectivity of hydrogenation reactions, which was achieved via a precise control of the spatial distribution of metal nanoparticles at the droplet interfaces. It was found that Pd nanoparticles located in the inner interfacial layer of Pickering droplets exhibited a significantly enhanced selectivity for p-chloroaniline (up to 99.6%) in the hydrogenation of p-chloronitrobenzene in comparison to those in the outer interfacial layer (63.6%) in pure water (68.5%) or in pure organic solvents (46.8%). Experimental and theoretical investigations indicated that such a remarkable interfacial microregion-dependent catalytic selectivity was attributed to the microenvironments of the coexistence of water and organic solvent at the droplet interfaces, which could provide unique interfacial hydrogen-bonding interactions and solvation effects so as to alter the adsorption patterns of p-chloronitrobenzene and p-chloroaniline on the Pd nanoparticles, thereby avoiding the unwanted contact of C-Cl bonds with the metal surfaces. Our strategy of precise spatial control of catalysts at liquid-liquid interfaces and the unprecedented interfacial effect reported here not only provide new insights into the liquid-liquid interfacial reactions but also open an avenue to boost catalytic selectivity.

Hybrid Nanostructure Catalyst with Low Loading of Pt for the High-Efficiency Catalytic Hydrogenation of Chloronitrobenzene

Fabrication of low-loading, noble-metal, stable, and high-performance metal catalysts remains a thorny issue. Herein, we demonstrate the successful formation of a hybrid nanostructure Pt/TiO₂/SBA-15 catalyst (denoted as HNSC-P/T/S; Pt, 0.09%; TiO₂, 10%) with satisfactory activity in the hydrogenation of para-chloronitrobenzene (p-CNB). The HNSC-P/T/S showed >99% conversion and a high selectivity of >98%, and the turnover frequency number (TOF) reached 66 766 h^-1, which was impossible to achieve with Pt/TiO₂ (denoted as P/T) or Pt/SBA-15 (denoted as P/S). The success of the catalytic activity of the HNSC-P/T/S mainly relies on its synergistic effect and special structure, which can fully develop the catalytic ability of Pt, thereby reducing the Pt loading in the noble-based catalyst. Furthermore, the HNSC-P/T/S could also achieve an excellent catalytic activity in the hydrogenation of other nitroarenes. Hence, this work proposes a direction to prepare a noble-based catalyst with a low loading of noble metals for diverse applications.

Carbon Deposition on Heterogeneous Pt Catalysts Promotes the Selective Hydrogenation of Halogenated Nitroaromatics

Pt-based heterogeneous metal catalysts are commonly used in the hydrogenation of nitro groups. However, the continuous large metal domain size and the complex interaction between the substrates and metal surface usually inevitably result in side reactions, such as dehalogenation of halogenated nitroaromatics. In this work, by simply treating the Pt-based catalysts with CO at elevated temperature, the Boudouard reaction taking place on Pt surface results in the deposition of carbon species thereon. The carbon deposition not only inhibits the dehalogenation by restricting the planar interaction of the aromatic group with the Pt surface that is segmented by C, the hydrogenation activity of the nitro group is also enhanced on the partially positively charged surface Pt sites created by the electron-withdrawing interstitial C. Such a simple treatment strategy is effective for fabricating Pt-based catalysts on different supports toward the selective hydrogenation of a wide range of halogenated nitroaromatics.

Molybdenum nitrides from structures to industrial applications

Owing to their remarkable characteristics, refractory molybdenum nitride (MoN x )-based compounds have been deployed in a wide range of strategic industrial applications. This review reports the electronic and structural properties that render MoN x materials as potent catalytic surfaces for numerous chemical reactions and surveys the syntheses, procedures, and catalytic applications in pertinent industries such as the petroleum industry. In particular, hydrogenation, hydrodesulfurization, and hydrodeoxygenation are essential processes in the refinement of oil segments and their conversions into commodity fuels and platform chemicals. N-vacant sites over a catalyst’s surface are a significant driver of diverse chemical phenomena. Studies on various reaction routes have emphasized that the transfer of adsorbed hydrogen atoms from the N-vacant sites reduces the activation barriers for bond breaking at key structural linkages. Density functional theory has recently provided an atomic-level understanding of Mo–N systems as active ingredients in hydrotreating processes. These Mo–N systems are potentially extendible to the hydrogenation of more complex molecules, most notably, oxygenated aromatic compounds.

Optimizing the metal-support interactions at the Pd-polymer carbon nitride Mott-Schottky heterojunction interface for an enhanced electrocatalytic hydrodechlorination reaction

We reported one novel strategy via band engineering of the semiconductor support to optimize the metal-support interactions at a Mott-Schottky heterojunction interface and enhance the metal's electrocatalytic hydrodechlorination (EHDC) performance. Taking palladium-polymer carbon nitride (Pd/PCN) as a model, the band tuning of PCN by heteroatomic phosphorus (P) doping substantially boosted the EHDC of 2,4-dichlorophenol (2,4-DCP, one typical chlorinated organic pollutants (COPs)) on Pd, and a peak specific activity of 0.172 min^-1 cm_Pd^-2 was achieved by Pd/P-PCN-0.25 (0.25 reflected the P content, and denoted the mass ratio of the P source to PCN precursor used in P-PCN synthesis), quadrupling 0.041 min^-1 cm_Pd^-2 of Pd/C and outperforming most of the reported catalysts. The mechanism study revealed the P doping in PCN enabled the positive shift of its Fermi level, which weakened the Pd-PCN interactions and alleviated the electron excess of Pd in Pd/PCN. The P-PCN in Pd/P-PCN-0.25 with the ideal band structure evoked a Pd electronic state that maximized EHDC efficiency. Further investigation into the intermediate products of EHDC on Pd/P-PCN and the biological safety of the 2,4-DCP-contaminated water after EHDC treatment demonstrated the EHDC over our catalyst was environmental-benignity for COPs abatement.

Electron-Enriched Pd Nanoparticles for Selective Hydrogenation of Halonitrobenzenes to Haloanilines

Selective hydrogenation of halonitrobenzenes into haloanilines represents a green process to replace the environmentally unfriendly non-catalytic chemical reduction process in industry. However, this transformation often suffers from serious dehalogenation due to the easy break of carbon-halogen bonds on metal surfaces. Modulations of the electronic structure of the supported Pd nanoparticles on Lewis-basic layered double hydroxides have been demonstrated to promote catalytic activity and selectivity for hydrogenation of halonitrobenzenes into haloanilines. Mechanism studies suggest that Pd with the enhanced electron density not only improves the capability for hydrogen activation, but also generates the partially negative-charged hydrogen species to suppress the electrophilic attack on the carbon-halogen bond and avoid the dehalogenation.

Iron Pyrite Nanocrystals: A Potential Catalyst for Selective Transfer Hydrogenation of Functionalized Nitroarenes

We report a solution-based synthetic method to produce shape-tunable iron pyrite (FeS2) nanocrystals using iron oxy-hydroxide (β-FeOOH) as a precursor and their application for selective reduction of functionalized nitroarenes to aniline derivatives with formic acid-triethylamine (HCOOH-Et3N) as a hydrogen donor system.

Selective Hydrogenation of Cinnamaldehyde over the Stepped and Plane Surface of Pd Nanoparticles with Controlled Morphologies by CO Chemisorption

Carbon monoxide (CO) molecules are attracting attention as capping agents that control the structure of metal nanoparticles. In this study, we aimed to control the shape and surface structure of Pd particles by reducing the supported Pd precursor with CO. The reduction of Pd nanoparticles with CO promoted the exposure of step sites and generated spherical and concave-tetrahedral Pd particles on carbon and SiO₂ supports. On the other hand, conventional H₂-reduced Pd particles show a flattened shape. The preferential exposure of the step sites by the adsorbed CO molecules was supported by the density functional theory-calculated surface energy and the Wulff construction. Morphology- and surface-controlled Pd nanoparticles were used to study the surface structure and morphology effects of Pd nanoparticles on cinnamaldehyde (CAL) hydrogenation. With an increase in the fraction of step sites on Pd nanoparticles, the hydrogenation activity and selectivity of hydrocinnamaldehyde (HCAL) increased. On step sites, the adsorption of the C═C bond of CAL proceeded preferentially, and HCAL was efficiently and selectively generated.

Activating palladium nanoparticles via a Mott-Schottky heterojunction in electrocatalytic hydrodechlorination reaction

This work exploited one novel power of the Mott-Schottky heterojunction interface in activating the palladium (Pd) in electrocatalytic hydrodechlorination reaction (EHDC, one reaction targeted for the abatement of chlorinated organic pollutants from water). By forming a Mott-Schottky contact with polymer carbon nitride (Pd-PCN), the Pd nanoparticles enable a relatively complete and pseudo-first-order conversion of 2,4-dichlorophenol (2,4-DCP) to phenol and Cl^- with the reaction rate constant (k_obs) triple that of the conventional Pd-C (0.68 vs. 0.26 min^-1 mol_Pd^-1). Further comparison in k_obs of Pd-PCN and the Pd catalysts reported in literatures revealed that our Pd-PCN was among the top active catalysts for EHDC. The robust performance of Pd-PCN was attributed to the strong metal-support interactions at the Mott-Schottky heterojunction interface, which enriched the electron on Pd and improved its anti-poisoning ability against phenol. The strong support-metal interactions also endowed Pd-PCN with high activity/structure stability in EHDC. The presence of some anions in water body including NO₃^-, NO₂^- and Cl^- exerted little effect on EHDC, while the reduced sulfur compounds (S^2- and SO₃^2-), even in a very low concentration (1 mM), could significantly deactivate the catalyst. This work provides a facile and efficient strategy to activate noble metals in catalytic reactions.

Enhanced Catalytic Hydrogenation Performance of Rh-Co2O3 Heteroaggregate Nanostructures by in Situ Transformation of Rh@Co Core-Shell Nanoparticles

In this work, poly(vinylpyrrolidone)-stabilized 3-5 nm Rh@Co core-shell nanoparticles were synthesized by a sequential reduction method, which was further in situ transformed into Rh-Co₂O₃ heteroaggregate nanostructures on alumina supports. The studies of XRD, HAADF-STEM images with phase mappings, XPS, TPR, and DRIFT-IR with CO probes confirm that the as-synthesized Rh@Co nanoparticles were core-shell-like structures with Rh cores and Co-rich shells, and Rh-Co₂O₃ heteroaggregate nanostructures are obtained by calcination of Rh@Co nanoparticles and subsequent selective H₂ reduction. The Rh-Co₂O₃/Al₂O₃ nanostructures demonstrated enhanced catalytic performance for hydrogenations of various substituted nitroaromatics relative to individual Rh/Al₂O₃ and illustrated a high catalytic stability during recycling experiments for o-nitrophenol hydrogenation reactions. The catalytic performance enhancement of Rh-Co₂O₃/Al₂O₃ nanocatalysts is ascribed to the Rh-Co₂O₃ interfaces where the Rh-Co₂O₃ interaction not only prevents the active Rh particles from agglomeration but also promotes the catalytic hydrogenation performance.

Palladium Supported on Calcium Decorated Carbon Nanotube Hybrids for Chemoselective Hydrogenation of Cinnamaldehyde

The chemoselective hydrogenation of cinnamaldehyde (CAL) to the corresponding hydrocinamaldehyde (HCAL) is a type of important reactions in fine chemistry, which is critically dependent on the rational design the chemical structure of active metal. In this work, calcium promoted palladium on CNT hybrid (Ca-Pd@CNT) with monolithic structure was synthesized through one-pot alginate gel process. The catalytic performance results showed that moderate Ca promotion catalyst (Ca-Pd@CNTHCl-2h) present a superior CAL hydrogenation activity with CAL conversion of 99.9% and HCAL selectivity of 86.4% even at the lager Pd nanoparticle size (c.a. 5 nm). The characterization results show that the electron transfer between the additive Ca promoter and Pd nanoparticles (NPs) could modify the electron structure of Pd species and induce the formation of the partial positively charged Pdδ+ species on the Pd NPs surface in the Ca-Pd@CNTHCl-2h catalyst resulting to the satisfactory catalytic performance. Furthermore, the one-pot gel synthesis methodology for microscopic carbon supported catalyst could also endows its great potential industry application in heterogeneous catalysis with easily handling during the transportation and reaction, and attributed to reducing the overall pressure drop across in the fix-bed reactor.

Preparation and Catalytic Performance of Metal-Rich Pd Phosphides for the Solvent-Free Selective Hydrogenation of Chloronitrobenzene

A facile synthesis method of palladium phosphide supported on the activated carbon was developed. The effects of Pd precursors for phosphatization, phosphatization temperature, and the ratio of hypophosphite/Pd on the generation of palladium phosphide were investigated, and a generation mechanism of the Pd3P crystal structure is proposed. The results demonstrate that only PdO, rather than Pd or PdCl2, can transform into Pd phosphide without damage to the activated carbon. The penetration of P into the Pd particle can dramatically improve the dispersion of Pd species particles on the activated carbon. The generation of Pd phosphide greatly depends on the phosphatization temperature and the ratio of hypophosphite/Pd. An intact Pd3P crystal structure was obtained when the ratio of hypophosphite/Pd reached 32 and the phosphatization temperature was above 400 °C. The Pd3P supported on the activated carbon exhibited superior catalytic performance in terms of the hydrogenation of halonitrobenzenes to haloanilines because it had few L acids and B acids sites and could not generate deficient-electron active hydrogen atoms as electrophiles.

Properties of Carbon-supported Precious Metals Catalysts under Reductive Treatment and Their Influence in the Hydrodechlorination of Dichloromethane

This study analyzes the effect of the reduction temperature on the properties of Rh, Pt and Pd catalysts supported on activated carbon and their performance in the hydrodechlorination (HDC) of dichloromethane (DCM). The reduction temperature plays an important role in the oxidation state, size and dispersion of the metallic phase. Pd is more prone to sintering, followed by Pt, while Rh is more resistant. The ratio of zero-valent to electro-deficient metal increases with the reduction temperature, with that effect being more remarkable for Pd and Pt. The higher resistance to sintering of Rh and the higher stability of electro-deficient species under thermal reductive treatment can be attributed to a stronger interaction with surface oxygen functionalities. Dechlorination activity and a TOF increase with reduction temperature (250–450 °C) occurred in the case of Pt/C catalyst, while a great decrease of both was observed for Pd/C, and no significant effect was found for Rh/C. Pt0 represents the main active species for HDC reaction in Pt/C. Therefore, increasing the relative amount of these species increased the TOF value, compensating for the loss of dispersion. In contrast, Pdn+ appears as the main active species in Pd/C and their relatively decreasing occurrence together with the significant decrease of metallic area reduces the HDC activity. Rh/C catalyst suffered only small changes in dispersion and metal oxidation state with the reduction temperature and thus this variable barely affected its HDC activity.

Synergistic Effect of Segregated Pd and Au Nanoparticles on Semiconducting SiC for Efficient Photocatalytic Hydrogenation of Nitroarenes

Efficient catalytic hydrogenation of nitroarenes to anilines with molecular hydrogen at room temperature is still a challenge. In this study, this transformation was achieved by using a photocatalyst of SiC-supported segregated Pd and Au nanoparticles. Under visible-light irradiation, the nitrobenzene hydrogenation reached a turnover frequency as high as 1715 h^-1 at 25 °C and 0.1 MPa of H₂ pressure. This exceptional catalytic activity is attributed to a synergistic effect of Pd and Au nanoparticles on the semiconducting SiC, which is different from the known electronic or ensemble effects in Pd-Au catalysts. This kind of synergism originates from the plasmonic electron injection of Au and the Mott-Schottky contact at the interface between Pd and SiC. This three-component system changes the electronic structures of the SiC surface and produces more active sites to accommodate the active hydrogen that spills over from the surface of Pd. These active hydrogen species have weaker interactions with the SiC surface and thus are more mobile than on an inert support, resulting in an ease in reacting with the N═O bonds in nitrobenzene absorbed on SiC to produce aniline.

Selectivity Control on Hydrogenation of Substituted Nitroarenes through End-On Adsorption of Reactants in Zeolite-Encapsulated Platinum Nanoparticles

Platinum nanoparticles encapsulated into zeolite Y (Pt@Y catalyst) exhibit excellent catalytic selectivity in the hydrogenation of substituted nitroarenes to form the corresponding aromatic amines, even after complete conversion. With the hydrogenation of p-chloronitrobenzene as a model, the role of zeolite encapsulation toward perfect selectivity can be attributed to constraint of the substrate adsorbed on the platinum surface in an end-on conformation. This conformation results in the activation of only one adsorbed group, with little influence on the other one in the molecule. Owing to a much lower apparent activation energy of Pt@Y for the hydrogenation of a separately adsorbed nitro group than that of the adsorbed chloro group, the Pt@Y catalyst can prevent hydrodechlorination of p-chloronitrobenzene under mild conditions. Moreover, such a conformation results in a reduced adsorption energy of target p-chloroaniline on the platinum surface; thus suppressing the reactivity of hydrodechlorination of p-chloroaniline to circumvent further C-Cl bond breakage.

Hollow carbon anchored highly dispersed Pd species for selective hydrogenation of 3-nitrostyrene: metal-carbon interaction

Hollow nanocarbon supported Pd species are highly active (TOF of 21 845 h⁻¹), selective (97%), and stable (4 cycles) for selective hydrogenation of 3-nitrostyrene to 3-ethylnitrobenze.

Interfacial charge distributions in carbon-supported palladium catalysts

Controlling the charge transfer between a semiconducting catalyst carrier and the supported transition metal active phase represents an elite strategy for fine turning the electronic structure of the catalytic centers, hence their activity and selectivity. These phenomena have been theoretically and experimentally elucidated for oxide supports but remain poorly understood for carbons due to their complex nanoscale structure. Here, we combine advanced spectroscopy and microscopy on model Pd/C samples to decouple the electronic and surface chemistry effects on catalytic performance. Our investigations reveal trends between the charge distribution at the palladium-carbon interface and the metal's selectivity for hydrogenation of multifunctional chemicals. These electronic effects are strong enough to affect the performance of large (~5 nm) Pd particles. Our results also demonstrate how simple thermal treatments can be used to tune the interfacial charge distribution, hereby providing a strategy to rationally design carbon-supported catalysts.Control over charge transfer in carbon-supported metal nanoparticles is essential for designing new catalysts. Here, the authors show that thermal treatments effectively tune the interfacial charge distribution in carbon-supported palladium catalysts with consequential changes in hydrogenation performance.