Recent Developments of Cascade Reactions Involving ω-Transaminases

One-pot chemo- and photo-enzymatic linear cascade processes

The combination of chemo- and photocatalyses with biocatalysis, which couples the flexible reactivity of the photo- and chemocatalysts with the highly selective and environmentally friendly nature of enzymes in one-pot linear cascades, represents a powerful tool in organic synthesis. However, the combination of photo-, chemo- and biocatalysts in one-pot is challenging because the optimal operating conditions of the involved catalyst types may be rather different, and the different stabilities of catalysts and their mutual deactivation are additional problems often encountered in one-pot cascade processes. This review explores a large number of transformations and approaches adopted for combining enzymes and chemo- and photocatalytic processes in a successful way to achieve valuable chemicals and valorisation of biomass. Moreover, the strategies for solving incompatibility issues in chemo-enzymatic reactions are analysed, introducing recent examples of the application of non-conventional solvents, enzyme-metal hybrid catalysts, and spatial compartmentalization strategies to implement chemo-enzymatic cascade processes.

Rational design of transaminases based on comparative analysis of catalytically active and distance-free modes of the high-energy intermediate state

Bioproduction of chiral amines is limited by low transaminase (TA) activity on nonnatural substrates, leading to the need for protein engineering. To address the challenge of quickly and precisely identifying the engineering targets, a strategy was proposed based on analyzing the mode changes in the high-energy intermediate state (H-state) of the substrate-enzyme complex during catalysis. By substituting the residues with minimal structural changes in catalytically active mode (A-mode) and distance-free mode (F-mode) of the H-state complex with more conserved ones to stabilize it, a TA mutant M5(T295C/L387A/V436A) with 121.9-fold higher activity for synthesizing the (S)-Rivastigmine precursor (S)-1-(3-methoxyphenyl)ethylamine was created. The applicability of this strategy was also validated by engineering another TA for 1.52-fold higher activity and >99% selectivity toward (R)-3-amino-1-butanol biopreparation. The much higher stereoselectivity of the mutant compared with the wild type (28.3%) demonstrated that this strategy is not only advantageous in engineering enzyme activity but also applicable for modulating stereoselectivity.

Multienzymatic Cascades and Nanomaterial Scaffolding-A Potential Way Forward for the Efficient Biosynthesis of Novel Chemical Products

Synthetic biology is touted as the next industrial revolution as it promises access to greener biocatalytic syntheses to replace many industrial organic chemistries. Here, it is shown to what synthetic biology can offer in the form of multienzyme cascades for the synthesis of the most basic of new materials-chemicals, including especially designer chemical products and their analogs. Since achieving this is predicated on dramatically expanding the chemical space that enzymes access, such chemistry will probably be undertaken in cell-free or minimalist formats to overcome the inherent toxicity of non-natural substrates to living cells. Laying out relevant aspects that need to be considered in the design of multi-enzymatic cascades for these purposes is begun. Representative multienzymatic cascades are critically reviewed, which have been specifically developed for the synthesis of compounds that have either been made only by traditional organic synthesis along with those cascades utilized for novel compound syntheses. Lastly, an overview of strategies that look toward exploiting bio/nanomaterials for accessing channeling and other nanoscale materials phenomena in vitro to direct novel enzymatic biosynthesis and improve catalytic efficiency is provided. Finally, a perspective on what is needed for this field to develop in the short and long term is presented.

Dual-function transaminases with hybrid nanoflower for the production of value-added chemicals from biobased levulinic acid

The U.S. Department of Energy has listed levulinic acid (LA) as one of the top 12 compounds derived from biomass. LA has gained much attention owing to its conversion into enantiopure 4-aminopentanoic acid through an amination reaction. Herein, we developed a coupled-enzyme recyclable cascade employing two transaminases (TAs) for the synthesis of (S)-4-aminopentanoic acid. TAs were first utilized to convert LA into (S)-4-aminopentanoic acid using (S)-α-Methylbenzylamine [(S)-α-MBA] as an amino donor. The deaminated (S)-α-MBA i.e., acetophenone was recycled back using a second TAs while using isopropyl amine (IPA) amino donor to generate easily removable acetone. Enzymatic reactions were carried out using different systems, with conversions ranging from 30% to 80%. Furthermore, the hybrid nanoflowers (HNF) of the fusion protein were constructed which afforded complete biocatalytic conversion of LA to the desired (S)-4-aminopentanoic acid. The created HNF demonstrated storage stability for over a month and can be reused for up to 7 sequential cycles. A preparative scale reaction (100 mL) achieved the complete conversion with an isolated yield of 62%. Furthermore, the applicability of this recycling system was tested with different β-keto ester substrates, wherein 18%-48% of corresponding β-amino acids were synthesized. Finally, this recycling system was applied for the biosynthesis of pharmaceutical important drug sitagliptin intermediate ((R)-3-amino-4-(2,4,5-triflurophenyl) butanoic acid) with an excellent conversion 82%.

Development of an aminotransferase-driven biocatalytic cascade for deracemization of d,l-phosphinothricin

2-oxo-4-[(hydroxy)(methyl)phosphinoyl]butyric acid (PPO) is the essential precursor keto acid for the asymmetric biosynthesis of herbicide l-phosphinothricin (l-PPT). Developing a biocatalytic cascade for PPO production with high efficiency and low cost is highly desired. Herein, a d-amino acid aminotransferase from Bacillus sp. YM-1 (Ym DAAT) with high activity (48.95 U/mg) and affinity (Km  = 27.49 mM) toward d-PPT was evaluated. To circumvent the inhibition of by-product d-glutamate (d-Glu), an amino acceptor (α-ketoglutarate) regeneration cascade was constructed as a recombinant Escherichia coli (E. coli D), by coupling Ym d-AAT, d-aspartate oxidase from Thermomyces dupontii (TdDDO) and catalase from Geobacillus sp. CHB1. Moreover, the regulation of the ribosome binding site was employed to overcome the limiting step of expression toxic protein TdDDO in E. coli BL21(DE3). The aminotransferase-driven whole-cell biocatalytic cascade (E. coli D) showed superior catalytic efficiency for the synthesis of PPO from d,l-phosphinothricin (d,l-PPT). It revealed the production of PPO exhibited high space-time yield (2.59 g L-1  h-1 ) with complete conversion of d-PPT to PPO at high substrate concentration (600 mM d,l-PPT) in 1.5 L reaction system. This study first provides the synthesis of PPO from d,l-PPT employing an aminotransferase-driven biocatalytic cascade.

Enantio-Complementary Synthesis of 2-Substituted Pyrrolidines and Piperidines via Transaminase-Triggered Cyclizations

Chiral N-heterocycles are a common motif in many active pharmaceutical ingredients; however, their synthesis often relies on the use of heavy metals. In recent years, several biocatalytic approaches have emerged to reach enantiopurity. Here, we describe the asymmetric synthesis of 2-substituted pyrrolidines and piperidines, starting from commercially available ω-chloroketones by using transaminases, which has not yet been comprehensively studied. Analytical yields of up to 90% and enantiomeric excesses of up to >99.5% for each enantiomer were achieved, which has not previously been shown for bulky substituents. This biocatalytic approach was applied to synthesize (R)-2-(p-chlorophenyl)pyrrolidine on a 300 mg scale, affording 84% isolated yield, with >99.5% ee.

Biocatalytic Transamination of Aldolase-Derived 3-Hydroxy Ketones

Although optical pure amino alcohols are in high demand due to their widespread applicability, they still remain challenging to synthesize, since commonly elaborated protection strategies are required. Here, a multi-enzymatic methodology is presented that circumvents this obstacle furnishing enantioenriched 1,3-amino alcohols out of commodity chemicals. A Type I aldolase forged the carbon backbone with an enantioenriched aldol motif, which was subsequently subjected to enzymatic transamination. A panel of 194 TAs was tested on diverse nine aldol products prepared through different nucleophiles and electrophiles. Due to the availability of (R)- and (S)-selective TAs, both diastereomers of the 1,3-amino alcohol motif were accessible. A two-step process enabled the synthesis of the desired amino alcohols with up to three chiral centers with de up to >97 in the final products.

Asymmetric Biomimetic Transamination of Trifluoromethyl Ketones

In the presence of chiral pyridoxamine 4b as the catalyst and 2,2-diphenylglycine (3) as the amine source, asymmetric biomimetic transamination of trifluoromethyl ketones produces optically active α-trifluoromethyl amines 6 in 81-98% yields with 88-95% ee's under mild conditions.

A transaminase with β-activity from Variovorax boronicumulans for the production of enantiopure β-amino acids

Enantioselective transamination of amino acids is a great challenge in biotechnology as suitable enzymes with wide substrate spectrum are rare. Here, we present a new transaminase from Variovorax boronicumulans (VboTA, Variovorax boronicumulansω-transaminase) which is specific for β-amino acids. The amino acid sequence of VboTA is similar to an ω-transaminase from Variovorax paradoxus, for which a crystal-structure is available. This similarity is allowing us to classify VboTA as a fold type 1 ω-transaminase (ω-TA). Although both enzymes have a high sequence similarity (86% identities, 92% positives), there are differences in the active center, which allow VboTA to accept a broader substrate spectrum. Both enzymes have also a different temperature stability and temperature optimum. VboTA deaminates the D-form of aromatic β-amino acids, such as β-homophenylalanine and β-phenylalanine as well as aliphatic β-amino acids, such as β-homoalanine and β-leucine. The optimal reaction conditions turned out to be 32 °C and pH 9. Kinetic resolution lead to high enantiomeric excess of 86.6% to >99.9%, depending on the amino donor/acceptor pair. In contrast to many other ω-TAs, VboTA has a broad substrate spectrum and uses both aromatic or aliphatic amino acids. With γ-amino acids as substrates, VboTA showed no activity at all.

Efficient Synthesis of Key Chiral Intermediate in Painkillers (R)-1-[3,5-Bis(trifluoromethyl)phenyl]ethanamine by Bienzyme Cascade System with R-ω-Transaminase and Alcohol Dehydrogenase Functions

(R)-1-[3,5-bis(trifluoromethyl)phenyl]ethanamine, a key chiral intermediate of selective tetrodotoxin-sensitive blockers, was efficiently synthesized by a bienzyme cascade system formed by with R-ω-transaminase (ATA117) and an alcohol dehydrogenase (ADH) co-expression system. Herein, we report that the use of ATA117 as the biocatalyst for the amination of 3,5-bistrifluoromethylacetophenone led to the highest efficiency in product performance (enantiomeric excess > 99.9%). Moreover, to further improve the product yield, ADH was introduced into the reaction system to promote an equilibrium shift. Additionally, bienzyme cascade system was constructed by five different expression systems, including two tandem expression recombinant plasmids (pETDuet-ATA117-ADH and pACYCDuet-ATA117-ADH) and three co-expressed dual-plasmids (pETDuet-ATA117/pET28a-ADH, pACYCDuet-ATA117/pET28a-ADH, and pACYCDuet-ATA117/pETDuet-ADH), utilizing recombinant engineered bacteria. Subsequent studies revealed that as compared with ATA117 single enzyme, the substrate handling capacity of BL21(DE3)/pETDuet-ATA117-ADH (0.25 g wet weight) developed for bienzyme cascade system was increased by 1.50 folds under the condition of 40 °C, 180 rpm, 0.1 M pH9 Tris-HCl for 24 h. To the best of our knowledge, ours is the first report demonstrating the production of (R)-1-[3,5-bis(trifluoromethyl)phenyl]ethanamine using a bienzyme cascade system, thus providing valuable insights into the biosynthesis of chiral amines.

A Plurizyme with Transaminase and Hydrolase Activity Catalyzes Cascade Reactions

Engineering dual‐function single polypeptide catalysts with two abiotic or biotic catalytic entities (or combinations of both) supporting cascade reactions is becoming an important area of enzyme engineering and catalysis. Herein we present the development of a PluriZyme, TR₂E₂, with efficient native transaminase (k_cat: 69.49±1.77 min⁻¹) and artificial esterase (k_cat: 3908–0.41 min⁻¹) activities integrated into a single scaffold, and evaluate its utility in a cascade reaction. TR₂E₂ (pH_opt: 8.0–9.5; T_opt: 60–65 °C) efficiently converts methyl 3‐oxo‐4‐(2,4,5‐trifluorophenyl)butanoate into 3‐(R)‐amino‐4‐(2,4,5‐trifluorophenyl)butanoic acid, a crucial intermediate for the synthesis of antidiabetic drugs. The reaction proceeds through the conversion of the β‐keto ester into the β‐keto acid at the hydrolytic site and subsequently into the β‐amino acid (e.e. >99 %) at the transaminase site. The catalytic power of the TR₂E₂PluriZyme was proven with a set of β‐keto esters, demonstrating the potential of such designs to address bioinspired cascade reactions.

Multienzyme Redox System with Cofactor Regeneration for Cyclic Deracemization of Sulfoxides

Optically pure sulfoxides are noteworthy compounds applied in a wide range of industrial fields; however, the biocatalytic deracemization of racemic sulfoxides is challenging. Herein, a high-enantioselective methionine sulfoxide reductase A (MsrA) was combined with a low-enantioselective styrene monooxygenase (SMO) for the cyclic deracemization of sulfoxides. Enantiopure sulfoxides were obtained in >90% yield and with >90% enantiomeric excess ( ee ) through dynamic "selective reduction and non-selective oxidation" cycles. The cofactors of MsrA and SMO were subsequently regenerated by the cascade catalysis of three auxiliary enzymes through the consumption of low-cost D-glucose. Moreover, this "one-pot, one-step" cyclic deracemization strategy exhibited a wide substrate scope toward various aromatic, heteroaromatic, alkyl and thio-alkyl sulfoxides. This system proposed an efficient strategy for the green synthesis of chiral sulfoxide .

Immobilized glucose oxidase on hierarchically porous COFs and integrated nanozymes: a cascade reaction strategy for ratiometric fluorescence sensors

Covalent organic frameworks (COFs) with uniform porosity, good stability, and desired biocompatibility can function as carriers of immobilized enzymes. However, the obstructed pores or partially obstructed pores have hindered their applicability after loading enzymes. In this study, the hierarchical COFs were prepared as an ideal support to immobilize glucose oxidase (GOD) and obtain GOD@COF. The hierarchical porosity and porous structures of COFs provided sufficient sites to immobilize GOD and increased the rate of diffusion of substrate and product. Moreover, N,Fe-doped carbon dots (N,Fe-CDs) with peroxidase-like activity were introduced to combine with GOD@COF to construct an enzyme-mediated cascade reaction, which is the basis of the sensor GOD@COF/N,Fe-CDs. The sensor has been successfully built and applied to detect glucose. The limit of detection was 0.59 μM for determining glucose with the proposed fluorescence sensor. The practicability was illustrated by detecting glucose in human serum and saliva samples with satisfactory recoveries. The proposed sensor provided a novel strategy that introduced COF-immobilized enzymes for cascade reactions in biosensing and clinical diagnosis.

Evolving New Chemistry: Biocatalysis for the Synthesis of Amine-Containing Pharmaceuticals

Biocatalysis has become an attractive tool in modern synthetic chemistry both in academic and industrial settings, offering access to enantiopure molecules. In industry, biocatalysis found use in small molecule pharmaceutical development. For several amine-containing drugs, biotransformations were applied in the process routes, improving the original syntheses employing classical chemical methods. This review illustrates how and why biocatalysis has been applied to create safer, more efficient and less costly processes for the manufacture of chiral amine-containing pharmaceuticals and alkaloids. Several enzyme classes have been applied to syntheses of natural products, pharmaceutical products and their intermediates, including transaminases, imine reductases, monoamine oxidases and Pictet-Spenglerases. The routes with and without application of biocatalysis are compared, and the potential of these enzyme classes in redesigned synthetic routes to natural products, alkaloids and high-value chemicals is evaluated, using syntheses of sitagliptin, suvorexant, PF-04449913, MK-7246, vernakalant, GSK-2879552, boceprevir and (−)-strictosidine as examples. Application of biocatalysis in the synthesis of amine-containing pharmaceuticals constitutes a greener alternative to transition metal-catalysed routes, facilitates installation of chiral amine functionalities at a late stage of the synthesis and provides exquisite stereocontrol. Opportunities and challenges of biocatalysis for the synthesis of chiral amines are reviewed with respect to use in drug discovery and development.

Transaminases as suitable catalysts for the synthesis of enantiopure β,β-difluoroamines

Transaminases have shown the ability to catalyze the amination of a series of aliphatic and (hetero)aromatic α,α-difluorinated ketones with high stereoselectivity, thus providing the corresponding β,β-difluoroamines in high isolated yields (55-82%) and excellent enantiomeric excess (>99%). It was also observed that these activated substrates could be quantitatively transformed by employing a small molar excess of the amine donor since this amination process was thermodynamically favored. Selected transformations could be scaled up to 500 mg, showing the robustness of this methodology.

Computer Modeling Explains the Structural Reasons for the Difference in Reactivity of Amine Transaminases Regarding Prochiral Methylketones

Amine transaminases (ATAs) are pyridoxal-5′-phosphate (PLP)-dependent enzymes that catalyze the transfer of an amino group from an amino donor to an aldehyde and/or ketone. In the past decade, the enzymatic reductive amination of prochiral ketones catalyzed by ATAs has attracted the attention of researchers, and more traditional chemical routes were replaced by enzymatic ones in industrial manufacturing. In the present work, the influence of the presence of an α,β-unsaturated system in a methylketone model substrate was investigated, using a set of five wild-type ATAs, the (R)-selective from Aspergillus terreus (Atr-TA) and Mycobacterium vanbaalenii (Mva-TA), the (S)-selective from Chromobacterium violaceum (Cvi-TA), Ruegeria pomeroyi (Rpo-TA), V. fluvialis (Vfl-TA) and an engineered variant of V. fluvialis (ATA-256 from Codexis). The high conversion rate (80 to 99%) and optical purity (78 to 99% ee) of both (R)- and (S)-ATAs for the substrate 1-phenyl-3-butanone, using isopropylamine (IPA) as an amino donor, were observed. However, the double bond in the α,β-position of 4-phenylbut-3-en-2-one dramatically reduced wild-type ATA reactivity, leading to conversions of <10% (without affecting the enantioselectivity). In contrast, the commercially engineered V. fluvialis variant, ATA-256, still enabled an 87% conversion, yielding a corresponding amine with >99% ee. Computational docking simulations showed the differences in orientation and intermolecular interactions in the active sites, providing insights to rationalize the observed experimental results.

Chemoenzymatic deracemization of lisofylline catalyzed by a (laccase/TEMPO)-alcohol dehydrogenase system

This article reports on a novel biocatalytic method for the synthesis of both enantiomers of lisofylline based on Trametes versicolor laccase, TEMPO as a redox mediator and stereocomplementary recombinant alcohol dehydrogenases as biocatalysts.

Synthesis of Sitagliptin Intermediate by a Multi-Enzymatic Cascade System Using Lipase and Transaminase With Benzylamine as an Amino Donor

Herein, we report the development of a multi-enzyme cascade using transaminase (TA), esterase, aldehyde reductase (AHR), and formate dehydrogenase (FDH), using benzylamine as an amino donor to synthesize the industrially important compound sitagliptin intermediate. A panel of 16 TAs was screened using ethyl 3-oxo-4-(2,4,5-trifluorophenyl) butanoate as a substrate (1). Amongst these enzymes, TA from Roseomonas deserti (TARO) was found to be the most suitable, showing the highest activity towards benzylamine (∼70%). The inhibitory effect of benzaldehyde was resolved by using AHR from Synechocystis sp. and FDH from Pseudomonas sp., which catalyzed the conversion of benzaldehyde to benzyl alcohol at the expense of NAD(P)H. Reaction parameters, such as pH, buffer system, and concentration of amino donor, were optimized. A single whole-cell system was developed for co-expressing TARO and esterase, and the promoter engineering strategy was adopted to control the expression level of each biocatalyst. The whole-cell reactions were performed with varying substrate concentrations (10-100 mM), resulting in excellent conversions (ranging from 72 to 91%) into the desired product. Finally, the applicability of this cascade was highlighted on Gram scale, indicating production of 70% of the sitagliptin intermediate with 61% isolated yield. The protocol reported herein may be considered an alternative to existing methods with respect to the use of cheaper amine donors as well as improved synthesis of (R) and (S) enantiomers with the use of non-chiral amino donors.

Biocatalytic access to betazole using a one-pot multienzymatic system in continuous flow

As an alternative to classical synthetic approaches for the production of betazole drug, a one-pot biocatalytic system for this pharmaceutical molecule from its alcohol precursor has been developed. An ω-transaminase, an alcohol dehydrogenase and a water-forming NADH oxidase for in situ cofactor recycling have been combined to catalyse this reaction, yielding 75% molar conversion in batch reactions with soluble enzymes. This multienzyme system was then co-immobilised through a newly established protocol for sequential functionalization of a methacrylate-based porous carrier to enable tailored immobilisation chemistries for each enzyme. This pluri-catalytic system has been set up in a continuous flow packed-bed reactor, generating a space-time yield of up to 2.59 g L-1 h-1 with 15 min residence and a constant supply of oxygen for in situ cofactor recycling through a segmented air-liquid flow. The addition of an in-line catch-and-release column afforded >80% product recovery.

Expanding the Toolbox of R-Selective Amine Transaminases by Identification and Characterization of New Members

Amine transaminases (ATAs) are used to synthesize enantiomerically pure amines, which are building blocks for pharmaceuticals and agrochemicals. R-selective ATAs belong to the fold type IV PLP-dependent enzymes, and different sequence-, structure- and substrate scope-based features have been identified in the past decade. However, our knowledge is still restricted due to the limited number of characterized (R)-ATAs, with additional bias towards fungal origin. We aimed to expand the toolbox of (R)-ATAs and contribute to the understanding of this enzyme subfamily. We identified and characterized four new (R)-ATAs. The ATA from Exophiala sideris contains a motif characteristic for d-ATAs, which was previously believed to be a disqualifying factor for (R)-ATA activity. The crystal structure of the ATA from Shinella is the first from a Gram-negative bacterium. The ATAs from Pseudonocardia acaciae and Tetrasphaera japonica are the first characterized (R)-ATAs with a shortened/missing N-terminal helix. The active-site charges vary significantly between the new and known ATAs, correlating with their diverging substrate scope.

Biocatalytic Reduction Reactions from a Chemist's Perspective

Reductions play a key role in organic synthesis, producing chiral products with new functionalities. Enzymes can catalyse such reactions with exquisite stereo-, regio- and chemoselectivity, leading the way to alternative shorter classical synthetic routes towards not only high-added-value compounds but also bulk chemicals. In this review we describe the synthetic state-of-the-art and potential of enzymes that catalyse reductions, ranging from carbonyl, enone and aromatic reductions to reductive aminations.

An Integrated Cofactor/Co-Product Recycling Cascade for the Biosynthesis of Nylon Monomers from Cycloalkylamines

We report a highly atom-efficient integrated cofactor/co-product recycling cascade employing cycloalkylamines as multifaceted starting materials for the synthesis of nylon building blocks. Reactions using E. coli whole cells as well as purified enzymes produced excellent conversions ranging from >80 and 95 % into desired ω-amino acids, respectively with varying substrate concentrations. The applicability of this tandem biocatalytic cascade was demonstrated to produce the corresponding lactams by employing engineered biocatalysts. For instance, ϵ-caprolactam, a valuable polymer building block was synthesized with 75 % conversion from 10 mM cyclohexylamine by employing whole-cell biocatalysts. This cascade could be an alternative for bio-based production of ω-amino acids and corresponding lactam compounds.

Research progress and the biotechnological applications of multienzyme complex

The multienzyme complex system has become a research focus in synthetic biology due to its highly efficient overall catalytic ability and has been applied to various fields. Multienzyme complexes are formed by cascading complexes, which are multiple functionally related enzymes that continuously and efficiently catalyze the production of substrates. Compared with current mainstream microbial cell catalytic systems, in vitro multienzyme molecular machines have many advantages, such as fewer side reactions, a high product yield, a fast reaction speed, easy product separation, a tolerable toxic environment, and robust system operability, showing increasing competitiveness in the field of biomanufacturing. In this review, the research progress of multienzyme complexes in nature and multienzyme cascades in vivo or in vitro will be introduced, and the discovered enzyme cascades concerning scaffolding proteins will also be discussed. This review is expected to provide a more theoretical basis for the modification of multienzyme complexes and broaden their application in the field of synthetic biology. KEY POINTS: • The cascade reactions of some natural multienzyme complexes are reviewed. • The main approaches of constructing artificial multienzyme complexes are summarized. • The structure and application of cellulosomes are discussed and prospected.

Enantioselective synthesis of tetrahydroisoquinolines via catalytic intramolecular asymmetric reductive amination

A highly efficient intramolecular asymmetric reductive amination transformation catalyzed by an iridium complex of ^tBu-ax-Josiphos has been realized, providing an efficient access to various THIQ alkaloids.

Structural and Functional Analysis of the Only Two Pyridoxal 5′-Phosphate-Dependent Fold Type IV Transaminases in Bacillus altitudinis W3

Aminotransferases are employed as industrial biocatalysts to produce chiral amines with high enantioselectivity and yield. BpTA-1 and BpTA-2 are the only two pyridoxal 5′-phosphate-dependent fold type IV transaminase enzymes in Bacillus altitudinis W3. Herein, we compared the structures and biochemical characteristics of BpTA-1 and BpTA-2 using bioinformatic analysis, circular dichroism spectroscopy, atomic force microscopy and other approaches. BpTA-1 and BpTA-2 are similar overall; both form homodimers and utilize a catalytic lysine. However, there are distinct differences in the substrate cofactor-binding pocket, molecular weight and the proportion of the secondary structure. Both enzymes have the same stereoselectivity but different enzymatic properties. BpTA-2 is more active under partial alkaline and ambient temperature conditions and BpTA-1 is more sensitive to pH and temperature. BpTA-2 as novel enzyme not only fills the building blocks of transaminase but also has broader industrial application potential for (R)-α-phenethylamines than BpTA-1. Structure-function relationships were explored to assess similarities and differences. The findings lay the foundation for modifying these enzymes via protein engineering to enhance their industrial application potential.

Asymmetric Synthesis of Optically Pure Aliphatic Amines with an Engineered Robust ω-Transaminase

The production of chiral amines by transaminase-catalyzed amination of ketones is an important application of biocatalysis in synthetic chemistry. It requires transaminases that show high enantioselectivity in asymmetric conversion of the ketone precursors. A robust derivative of ω-transaminase from Pseudomonasjessenii (PjTA-R6) that naturally acts on aliphatic substrates was constructed previously by our group. Here, we explore the catalytic potential of this thermostable enzyme for the synthesis of optically pure aliphatic amines and compare it to the well-studied transaminases from Vibrio fluvialis (VfTA) and Chromobacterium violaceum (CvTA). The product yields indicated improved performance of PjTA-R6 over the other transaminases, and in most cases, the optical purity of the produced amine was above 99% enantiomeric excess (e.e.). Structural analysis revealed that the substrate binding poses were influenced and restricted by the switching arginine and that this accounted for differences in substrate specificities. Rosetta docking calculations with external aldimine structures showed a correlation between docking scores and synthetic yields. The results show that PjTA-R6 is a promising biocatalyst for the asymmetric synthesis of aliphatic amines with a product spectrum that can be explained by its structural features.

A Simple Biosystem for the High-Yielding Cascade Conversion of Racemic Alcohols to Enantiopure Amines

The amination of racemic alcohols to produce enantiopure amines is an important green chemistry reaction for pharmaceutical manufacturing, requiring simple and efficient solutions. Herein, we report the development of a cascade biotransformation to aminate racemic alcohols. This cascade utilizes an ambidextrous alcohol dehydrogenase (ADH) to oxidize a racemic alcohol, an enantioselective transaminase (TA) to convert the ketone intermediate to chiral amine, and isopropylamine to recycle PMP and NAD⁺ cofactors via the reversed cascade reactions. The concept was proven by using an ambidextrous CpSADH-W286A engineered from (S)-enantioselective CpSADH as the first example of evolving ambidextrous ADHs, an enantioselective BmTA, and isopropylamine. A biosystem containing isopropylamine and E. coli (CpSADH-W286A/BmTA) expressing the two enzymes was developed for the amination of racemic alcohols to produce eight useful and high-value (S)-amines in 72-99 % yield and 98-99 % ee, providing with a simple and practical solution to this type of reaction.

Overview on Multienzymatic Cascades for the Production of Non-canonical α-Amino Acids

The 22 genetically encoded amino acids (AAs) present in proteins (the 20 standard AAs together with selenocysteine and pyrrolysine), are commonly referred as proteinogenic AAs in the literature due to their appearance in ribosome-synthetized polypeptides. Beyond the borders of this key set of compounds, the rest of AAs are generally named imprecisely as non-proteinogenic AAs, even when they can also appear in polypeptide chains as a result of post-transductional machinery. Besides their importance as metabolites in life, many of D-α- and L-α-"non-canonical" amino acids (NcAAs) are of interest in the biotechnological and biomedical fields. They have found numerous applications in the discovery of new medicines and antibiotics, drug synthesis, cosmetic, and nutritional compounds, or in the improvement of protein and peptide pharmaceuticals. In addition to the numerous studies dealing with the asymmetric synthesis of NcAAs, many different enzymatic pathways have been reported in the literature allowing for the biosynthesis of NcAAs. Due to the huge heterogeneity of this group of molecules, this review is devoted to provide an overview on different established multienzymatic cascades for the production of non-canonical D-α- and L-α-AAs, supplying neophyte and experienced professionals in this field with different illustrative examples in the literature. Whereas the discovery of new or newly designed enzymes is of great interest, dusting off previous enzymatic methodologies by a "back and to the future" strategy might accelerate the implementation of new or improved multienzymatic cascades.

Multi-enzyme pyruvate removal system to enhance (R)-selective reductive amination of ketones

Biocatalytic transamination is widely used in industrial production of chiral chemicals. Here, we constructed a novel multi-enzyme system to promote the conversion of the amination reaction. Firstly, we constructed the ArR-ωTA/TdcE/FDH/LDH multi-enzyme system, by combination of (R)-selective ω-transaminase derived from Arthrobacter sp. (ArR-ωTA), formate dehydrogenase (FDH) derived from Candida boidinii, formate acetyltransferase (TdcE) and lactate dehydrogenase (LDH) derived from E. coli MG1655. This multi-enzyme system was used to efficiently remove the by-product pyruvate by TdcE and LDH to facilitate the transamination reaction. The TdcE/FDH pathway was found to dominate the by-product pyruvate removal in the transamination reaction. Secondly, we optimized the reaction conditions, including d-alanine, DMSO, and pyridoxal phosphate (PLP) with different concentration of 2-pentanone (as a model substrate). Thirdly, by using the ArR-ωTA/TdcE/FDH/LDH system, the conversions of 2-pentanone, 4-phenyl-2-butanone and cyclohexanone were 84.5%, 98.2% and 79.3%, respectively.

The ArR-ωTA/TdcE/FDH/LDH system is an efficient system for increasing the conversion in the transamination reaction.

Peptide Bond Formation Between the Hetrosubunits of ω-Transaminase, Alanine Dehydrogenase, and Formate Dehydrogenase Through Subunit Splicing Promoted by Heterodimerization of Leucine Zipper Motifs

For the multimeric enzymes R-ω-transaminase (RTA), alanine dehydrogenase (AlaDH), and formate dehydrogenase (FDH), peptide bond formation between the hetrosubunits has been achieved by the intein-mediated in vivo subunit splicing. The subunit ligation is triggered by the heterodimerization of an arginine rich leucine zipper motif with a glutamic acid rich leucine zipper motif. The one-by-one ligation of hetrosubunits constructs the pairing enzymes RTA&AlaDH and AlaDH&FDH. The ligation modes were analyzed based on blue native polyacrylamide gel electrophoresis (BN-PAGE). The spectra of circular dichroism (CD), fluorescence, and two-dimensional FTIR provide information on the secondary structures and stability of the pairing enzymes. The enzyme-substrate interaction was analyzed based on microscale thermophoresis analysis. In contrast to the mixed three enzymes RTA + AlaDH + FDH, the ligated enzymes RTA&AlaDH + AlaDH&FDH exhibited a much larger substrate affinity, higher stability, and significantly enhanced activity.

Direct catalytic asymmetric synthesis of α-chiral primary amines

α-Chiral primary amines are one among the most valuable and versatile building blocks for the synthesis of numerous amine-containing pharmaceuticals and natural compounds. They also serve as chiral ligands or organo-catalysts for asymmetric catalysis. However, most of the existing chemocatalytic methods toward enantiopure primary amines rely on multistep manipulations on N-substituted substrates, which are not ideally atom-economical and cost-effective. Among the catalytic methods including the asymmetric transformations of the pre-prepared or in situ formed NH imines, biomimetic chemocatalysis inspired by enzymatic transaminations has recently emerged as an appealing and straightforward method to access chiral primary amines. This tutorial review highlights the state-of-the-art catalytic methods for the direct asymmetric synthesis of α-chiral primary amines and demonstrates their utility in the construction of molecular complexities, which may attract extensive attention and inspire applications in synthetic and medicinal chemistry.

Improving the catalytic thermostability of Bacillus altitudinis W3 ω-transaminase by proline substitutions

As a green biocatalyst, transaminase with high thermostability can be better employed to synthesize many pharmaceutical intermediates in industry. To improve the thermostability of (R)-selective amine transaminase from Bacillus altitudinis W3, related mutation sites were determined by multiple amino acid sequence alignment between wild-type ω-transaminase and four potential thermophilic ω-transaminases, followed by replacement of the related amino acid residues with proline by site-directed mutagenesis. Three stabilized mutants (D192P, T237P, and D192P/T237P) showing the highest stability were obtained and used for further analysis. Comparison with the wild-type enzyme revealed that the double mutant D192P/T237P exhibited the largest shift in thermostability, with a 2.5-fold improvement of t _1/2 at 40 °C, and a 6.3 °C increase in T ₅₀ ¹⁵, and a 5 °C higher optimal catalytic temperature. Additionally, this mutant exhibited an increase in catalytic efficiency (k _cat/K _m) relative to the wild-type enzyme. Modeling analysis indicated that the improved thermostability of the mutants could be associated with newly formed hydrophobic interactions and hydrogen bonds. This study shown that proline substitutions guided by sequence alignment to improve the thermostability of (R)-selective amine transaminase was effective and this method can also be used to engineering other enzymes.