A Cobalt Hydride Catalyst for the Hydrogenation of CO2: Pathways for Catalysis and Deactivation

Thermodynamic and Kinetic Activity Descriptors for the Catalytic Hydrogenation of Ketones

Activity descriptors are a powerful tool for the design of catalysts that can efficiently utilize H2 with minimal energy losses. In this study, we develop the use of hydricity and H- self-exchange rates as thermodynamic and kinetic descriptors for the hydrogenation of ketones by molecular catalysts. Two complexes with known hydricity, HRh(dmpe)2 and HCo(dmpe)2, were investigated for the catalytic hydrogenation of ketones under mild conditions (1.5 atm and 25 °C). The rhodium catalyst proved to be an efficient catalyst for a wide range of ketones, whereas the cobalt catalyst could only hydrogenate electron-deficient ketones. Using a combination of experiment and electronic structure theory, thermodynamic hydricity values were established for 46 alkoxide/ketone pairs in both acetonitrile and tetrahydrofuran solvents. Through comparison of the hydricities of the catalysts and substrates, it was determined that catalysis was observed only for catalyst/ketone pairs with an exergonic H- transfer step. Mechanistic studies revealed that H- transfer was the rate-limiting step for catalysis, allowing for the experimental and computation construction of linear free-energy relationships (LFERs) for H- transfer. Further analysis revealed that the LFERs could be reproduced using Marcus theory, in which the H- self-exchange rates for the HRh/Rh+ and ketone/alkoxide pairs were used to predict the experimentally measured catalytic barriers within 2 kcal mol-1. These studies significantly expand the scope of catalytic reactions that can be analyzed with a thermodynamic hydricity descriptor and firmly establish Marcus theory as a valid approach to develop kinetic descriptors for designing catalysts for H- transfer reactions.

Evaluating the Catalytic Activities of PNCNP Pincer Group 10 Metal Hydride Complexes: Pd-Catalyzed Reduction of CO2 to the Formic Acid Level with NH3·BH3 and NaBH4 under Ambient Conditions

In order to develop efficient protocols for CO₂ reduction with less expensive and more convenient hydrogen sources, the catalytic reactivities of group 10 metal hydride complexes supported by a PNCNP pincer ligand, [2,6-(^tBu₂PNH)₂C₆H₃]MH (M = Ni, 1a; Pd, 1b; Pt, 1c), against the hydroboration of CO₂ with NH₃·BH₃ and NaBH₄ have been explored. Both 1a and 1b readily react with CO₂ at room temperature to form the corresponding formato complexes, [2,6-(^tBu₂PNH)₂C₆H₃]MOC(O)H (M = Ni, 2a; Pd, 2b), in nearly quantitative yields. Treatment of NH₃·BH₃ with CO₂ (1 atm) in 1,4-dioxane or THF at room temperature in the presence of 0.05-1.0 mol % of 1b followed by hydrolysis of the resulting mixtures produces formic acid in 105-186% yields, and initial turnover frequencies of up to 2000 h^-1 are observed. In the presence of 1.0 mol % of 1b, NaBH₄ reacts with CO₂ (1 atm) in THF at room temperature to form NaB[OC(O)H]₄ (3) in 87% isolated yield. In situ NMR spectroscopy indicates that the reactions proceed through the insertion of the C═O bond in CO₂ into the Pd-H bond in 1b to form 2b, which sequentially reacts with the hydrides in NH₃·BH₃ or NaBH₄ to produce boron formato species and regenerate 1b. This work represents one of the rare examples of catalytic transfer hydrogenation of CO₂ with NH₃·BH₃ to the formic acid level under very mild conditions without any additives and also the first example of 4 equiv of CO₂ uptake by NaBH₄ in a reaction.

Does the Spin State and Oriented External Electric Field Boost the Efficiency of Fe(II) Pincer Catalyst toward CO2 Hydrogenation Reaction?

In this study, we have explored the catalytic reactivities of four PNP-pincer supported Fe(II) complexes, namely, [(^iPrPN^MeP)FeH₂(CO)] (1), [(^iPrPN^MeP)FeH(CO)(BH₄)] (2), [(^iPrPN^HP)FeH₂(CO)] (3), and [(^iPrPN^MeP)FeH(BH₄)] (4) (^iPrPN^MeP = MeN{CH₂CH₂(PⁱPr₂)}₂ and ^iPrPN^HP = HN{CH₂CH₂(PⁱPr₂)}₂) toward reductive CO₂ hydrogenation for formate production. Our density functional theory and ab initio complete active space self-consistent field study have identified three fundamental steps in this catalytic transformation: (i) anchoring of the CO₂ molecule in the vicinity of the metal using noncovalent interactions, (ii) catalyst regeneration via H₂ cleavage, and (iii) formate rebound step leading to catalytic poisoning. The variations in the catalytic efficiency observed among these catalysts were attributed to either easing of steps (i) and (ii) or the hampering step (iii). This can be achieved in various chemical/non-chemical ways, for instance, (a) incorporation of strong-field ligands such as CO facilitating single-state reactivity and eliminating two-state reactivity that generally enhances the rate and (b) inclusion of Lewis acids such as LiOTf and strong bases found to either avoid catalytic poisoning or ease the H-H cleavages, to enhance the rate of reaction (c) evading mixing of excited open-shell singlet states to the ground closed-shell singlet state that hampers the catalytic regeneration. We have probed the role of oriented external electric fields (OEEFs) in the entire mechanistic profile for the best and worst catalyst, and our study suggests that imposing OEEFs opposite to the reaction axis (z-axis) fastens the catalytic regeneration step and, at the same time, hampers catalytic poisoning. The application of OEEFs is found to regulate the energetics of various spin states and can hamper two-state reactivity, therefore increasing the efficiency. Thus, this study provides insights into the CO₂ hydrogenation mechanism where the role of bases/Lewis acid, ligand design, spin states, and electric field in a particular direction has been established and is, therefore, likely to pave the way forward for a new generation of catalysts.

Translating aqueous CO2 hydrogenation activity to electrocatalytic reduction with a homogeneous cobalt catalyst

A molecular cobalt CO₂ hydrogenation catalyst was explored for electrocatalytic CO₂ reduction under aqueous conditions. The resulting pH-dependent selectivity between H₂ and HCO₂^- is rationalized with thermodynamic analysis and stoichiometric experiments.

Recent developments in first-row transition metal complex-catalyzed CO2 hydrogenation

Our modern civilization is currently standing at a crossroads due to excessive emission of anthropogenic CO₂ leading to adverse climate change effects. Hence, a proper CO₂ management strategy, including appropriate CO₂ capture, utilization, and storage (CCUS), has become a prime concern globally. On the other hand, C₁ chemicals such as methanol (CH₃OH) and formic acid (HCOOH) have emerged as leading materials for a wide range of applications in various industries, including chemical, biochemical, pharmaceutical, agrochemical, and even energy sectors. Hence, there is a concerted effort to bridge the gap between CO₂ management and methanol/formic acid production by employing CO₂ as a C₁-synthon. CO₂ hydrogenation to methanol and formic acid has emerged as one of the primary routes for directly converting CO₂ to a copious amount of methanol and formate, which is typically catalyzed by transition metal complexes. In this frontier article, we have primarily discussed the abundant first-row transition metal-driven hydrogenation reaction that has exhibited a significant surge in activity over the past few years. We have also highlighted the potential future direction of the research while incorporating a comparative analysis for the competitive second and third-row transition metal-based hydrogenation.

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P₂N₂" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P^R₂N^R'₂)₂]²⁺ complexes are electrocatalysts for both the oxidation and production of H₂. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P^R₂N^R'₂)₂]²⁺ complexes for the oxidation and production of H₂, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.

Recent progress in homogeneous hydrogenation of carbon dioxide to methanol

The requirement of running a new generation of fuel production is inevitable due to the limitation of oil production from reservoirs. On the other hand, enhancing the CO2 concentration in the atmosphere brings global warming phenomenon and leads to catastrophic disasters such as drought and flooding. Conversion of carbon dioxide to methanol can compensate for the liquid fuel requirement and mitigate CO2 emissions to the atmosphere. In this review, we surveyed the recent works on homogeneous hydrogenation of CO2 to CH3OH and investigated the experimental results in detail. We categorized the CO2 hydrogenation works based on the environment of the reaction, including neutral, acidic, and basic conditions, and discussed the effects of solvents’ properties on the experimental results. This review provides a perspective on the previous studies in this field, which can assist the researchers in selecting the proper catalyst and solvent for homogenous hydrogenation of carbon dioxide to methanol.

Challenges and recent advancements in the transformation of CO2 into carboxylic acids: straightforward assembly with homogeneous 3d metals

Transformation of carbon dioxide (CO2) into valuable organic carboxylic acids is essential for maintaining sustainability. In this review, such CO2 thermo-, photo- and electrochemical transformations under 3d-transition metal catalysis are described from 2017 until 2022.

Cobalt-Catalyzed Hydrosilylation of Carbon Dioxide to the Formic Acid, Formaldehyde, and Methanol Level-How to Control the Catalytic Network?

The selective hydrosilylation of carbon dioxide (CO₂) to either the formic acid, formaldehyde, or methanol level using a molecular cobalt(II) triazine complex can be controlled based on reaction parameters such as temperature, CO₂ pressure, and concentration. Here, we rationalize the catalytic mechanism that enables the selective arrival at each product platform. Key reactive intermediates were prepared and spectroscopically characterized, while the catalytic mechanism and the energy profile were analyzed with density functional theory (DFT) methods and microkinetic modeling. It transpired that the stepwise reduction of CO₂ involves three consecutive catalytic cycles, including the same cobalt(I) triazine hydride complex as the active species. The increasing kinetic barriers associated with each reduction step and the competing hydride transfer steps in the three cycles corroborate the strong influence of the catalyst environment on the product selectivity. The fundamental mechanistic insights provide a consistent description of the catalytic system and rationalize, in particular, the experimentally verified opportunity to steer the reaction toward the formaldehyde product as the chemically most challenging reduction level.

Electrocatalytic syngas generation with a redox non-innocent cobalt 2-phosphinobenzenethiolate complex

A cobalt complex supported by the 2-(diisopropylphosphaneyl)benzenethiol ligand was synthesized and its electronic structure and reactivity were explored. X-ray diffraction studies indicate a square planar geometry around the cobalt center with a trans arrangement of the phosphine ligands. Density functional theory calculations and electronic spectroscopy measurements suggest a mixed metal-ligand orbital character, in analogy to previously studied dithiolene and diselenolene systems. Electrochemical studies in the presence of 1 atm of CO₂ and Brønsted acid additives indicate that the cobalt complex generates syngas, a mixture of H₂ and CO, with faradaic efficiencies up to >99%. The ratios of H₂ : CO generated vary based on the additive. A H₂ : CO ratio of ∼3 : 1 is generated when H₂O is used as the Brønsted acid additive. Chemical reduction of the complex indicates a distortion towards a tetrahedral geometry, which is rationalized with DFT predictions as attributable to the populations of orbitals with σ*(Co-S) character. A mechanistic scheme is proposed whereby competitive binding between a proton and CO₂ dictates selectivity. This study provides insight into the development of a catalytic system incorporating non-innocent ligands with pendant base moieties for electrochemical syngas production.

Computational Study of Triphosphine-Ligated Cu(I) Catalysts for Hydrogenation of CO2 to Formate

The catalyzed hydrogenation of CO₂ to formate via a triphosphine-ligated Cu(I) was studied computationally at the density functional theory level in the presence of a self-consistent reaction field. Of the four functionals benchmarked, M06 was generally in the best agreement with the available experimentally estimated values. Two bases, DBU and TBD, were studied in the context of two proposed mechanisms in the MeCN solvent. Activation of H₂ was explored by using LCu(DBU)⁺ to form LCuH. Dissociation of a ligand arm results in higher barriers to form the key hydride complex, LCuH. The preferred mechanism passes through a transition state, where the H₂ has one H atom interacting with the copper center and the other H atom interacting with the N atom of the base, similar to H₂ insertion into a frustrated Lewis pair. There is no significant difference between the choice of a base, DBU or TBD, with respect to the proposed mechanisms. We propose that the experimentally observed differences between DBU and TBD reactivities for this mechanism are due to off-pathway changes.

Chiral-at-Metal: Iridium(III) Tetrazole Complexes With Proton-Responsive P-OH Groups for CO2 Hydrogenation

A rise in atmospheric CO2 levels, following years of burning fossil fuels, has brought about increase in global temperatures and climate change due to the greenhouse effect. As such, recent efforts in addressing this problem have been directed to the use of CO2 as a non-expensive and non-toxic single carbon, C1, source for making chemical products. Herein, we report on the use of tetrazolyl complexes as catalyst precursors for hydrogenation of CO2. Specifically, tetrazolyl compounds bearing P-S bonds have been synthesized with the view of using these as P∧N bidentate tetrazolyl ligands (1-3) that can coordinate to iridium(III), thereby forming heteroatomic five-member complexes. Interestingly, reacting the P,N'-bidentate tetrazolyl ligands with [Ir(C5 Me 5)Cl 2]2 led to serendipitous isolation of chiral-at-metal iridium(III) half-sandwich complexes (7-9) instead. Complexes 7-9 were obtained via prior formation of non-chiral iridium(III) half-sandwich complexes (4-6). The complexes undergo prior P-S bond heterolysis of the precursor ligands, which then ultimately results in new half-sandwich iridium(III) complexes featuring monodentate phosphine co-ligands with proton-responsive P-OH groups. Conditions necessary to significantly affect the rate of P-S bond heterolysis in the precursor ligand and the subsequent coordination to iridium have been reported. The complexes served as catalyst precursors and exhibited activity in CO2 and bicarbonate hydrogenation in excellent catalytic activity, at low catalyst loadings (1 μmol or 0.07 mol% with respect to base), producing concentrated formate solutions (ca 180 mM) exclusively. Catalyst precursors with proton-responsive P-OH groups were found to influence catalytic activity when present as racemates, while ease of dissociation of the ligand from the iridium center was observed to influence activity in spite of the presence of electron-donating ligands. A test for homogeneity indicated that hydrogenation of CO2 proceeded by homogeneous means. Subsequently, the mechanism of the reaction by the iridium(III) catalyst precursors was studied using 1H NMR techniques. This revealed that a chiral-at-metal iridium hydride species generated in situ served as the active catalyst.

Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO2 Using a Molecular Cobalt(II) Triazine Complex

The catalytic reduction of carbon dioxide (CO2 ) is considered a major pillar of future sustainable energy systems and chemical industries based on renewable energy and raw materials. Typically, catalysts and catalytic systems are transforming CO2 preferentially or even exclusively to one of the possible reduction levels and are then optimized for this specific product. Here, we report a cobalt-based catalytic system that enables the adaptive and highly selective transformation of carbon dioxide individually to either the formic acid, the formaldehyde, or the methanol level, demonstrating the possibility of molecular control over the desired product platform.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Catalytic hydrogenation of CO2 at a structurally rigidified cobalt center

Catalytic hydrogenation of CO₂ occurs at a cobalt center supported by a rigidified PNP ligand revealing higher catalytic performance.

A computational study on ligand assisted vs. ligand participation mechanisms for CO2 hydrogenation: importance of bifunctional ligand based catalysts

Bifunctional aminomethyl based Mn(i) catalysts favour a revised Noyori type mechanism for the CO₂ hydrogenation reaction.

Biomimetic heterobimetallic architecture of Ni(ii) and Fe(ii) for CO2 hydrogenation in aqueous media. A DFT study

In this work, density functional theory has been employed to design a heterobimetallic catalyst of Ni(ii) and Fe(ii) for the effective CO₂ hydrogenation to HCOOH. Based on computational results, our newly designed catalyst is found to be effective for such conversion reactions with free energy as low as 14.13 kcal mol⁻¹ for the rate determining step. Such a low value of free energy indicates that the NiFe heterobimetallic catalyst can prove to be very efficient for the above said conversion. Moreover, the effects of ligand substitutions at the active metal center and the effects due to various spin states are also explored, and can serve as a great tool for the rational design of NiFe catalyst for CO₂ hydrogenation.

The hydrogenation of CO₂ by our newly designed [NiFe] heterobimetallic catalyst inspired by the active site of [NiFe] hydrogenase.

Light-driven catalytic hydrogenation of carbon dioxide at low-pressure by a trinuclear iridium polyhydride complex

Under irradiation conditions, low-pressure and room-temperature hydrogenation of carbon dioxide (CO₂) has been achieved using a trinuclear iridium hexahydride complex 1.

Cobalt catalysed reduction of CO2via hydroboration

We report an operationally convenient reduction of CO2 to methanol via cobalt catalysed hydroboration which occurs under mild reaction conditions. Addition of NaHBEt3 to Co(acac)3 generates an active hydroboration catalyst, which is proposed to be a "Co-H" species on the basis of infrared spectroscopy. The reduction of CO2 in the presence of various boranes showed that BH3·SMe2 afforded near quantitative conversion (98% NMR yield) to methanol upon hydrolysis.

A mechanistic study and computational prediction of iron, cobalt and manganese cyclopentadienone complexes for hydrogenation of carbon dioxide

A series of cobalt and manganese cyclopentadienone complexes are proposed and examined computationally as promising catalysts for hydrogenation of CO₂ to formic acid with total free energies as low as 20.0 kcal mol^-1 in aqueous solution. Density functional theory study of the newly designed cobalt and manganese complexes and experimentally reported iron cyclopentadienone complexes reveals a stepwise hydride transfer mechanism with a water or a methanol molecule assisted proton transfer for the cleavage of H₂ as the rate-determining step.

Current advances in the catalytic conversion of carbon dioxide by molecular catalysts: an update

Recent advances (2015–) in the catalytic conversion of CO₂ by metal-based and metal-free systems are discussed.

Unexpected concerted two-proton transfer for amination of formic acid to formamide catalysed by Mn bipyridinol complexes

DFT calculations reveal a concerted two-proton transfer mechanism for the activation of diethylamine and formic acid, as well as the formation of formamide and water catalysed by Mn bipyridinol complexes.

DFT study of CO2 hydrogenation catalyzed by a cobalt-based system: an unexpected formate anion-assisted deprotonation mechanism

An unexpected formate anion-assisted deprotonation mechanism is unfolded by a DFT study of CO₂ hydrogenation catalyzed by a cobalt-based system.

Changing the Mechanism for CO2 Hydrogenation Using Solvent-Dependent Thermodynamics

A critical scientific challenge for utilization of CO₂ is the development of catalyst systems that function in water and use inexpensive and environmentally friendly reagents. We have used thermodynamic insights to predict and demonstrate that the HCo^I (dmpe)₂ catalyst system, previously described for use in organic solvents, can hydrogenate CO₂ to formate in water with bicarbonate as the only added reagent. Replacing tetrahydrofuran as the solvent with water changes the mechanism for catalysis by altering the thermodynamics for hydride transfer to CO₂ from a key dihydride intermediate. The need for a strong organic base was eliminated by performing catalysis in water owing to the change in mechanism. These studies demonstrate that the solvent plays a pivotal role in determining the reaction thermodynamics and thereby catalytic mechanism and activity.

A Bimetallic Nickel-Gallium Complex Catalyzes CO2 Hydrogenation via the Intermediacy of an Anionic d10 Nickel Hydride

Large-scale CO₂ hydrogenation could offer a renewable stream of industrially important C₁ chemicals while reducing CO₂ emissions. Critical to this opportunity is the requirement for inexpensive catalysts based on earth-abundant metals instead of precious metals. We report a nickel-gallium complex featuring a Ni(0)→Ga(III) bond that shows remarkable catalytic activity for hydrogenating CO₂ to formate at ambient temperature (3150 turnovers, turnover frequency = 9700 h^-1), compared with prior homogeneous Ni-centered catalysts. The Lewis acidic Ga(III) ion plays a pivotal role in stabilizing catalytic intermediates, including a rare anionic d¹⁰ Ni hydride. Structural and in situ characterization of this reactive intermediate support a terminal Ni-H moiety, for which the thermodynamic hydride donor strength rivals those of precious metal hydrides. Collectively, our experimental and computational results demonstrate that modulating a transition metal center via a direct interaction with a Lewis acidic support can be a powerful strategy for promoting new reactivity paradigms in base-metal catalysis.