Multifunctional Catalysis Promoted by Solvent Effects: Ti-MCM41 for a One-Pot, Four-Step, Epoxidation–Rearrangement–Oxidation–Decarboxylation Reaction Sequence on Stilbenes and Styrenes

Styrene Oxide Isomerase-Catalyzed Meinwald Rearrangement in Cascade Biotransformations: Synthesis of Chiral and/or Natural Chemicals

Styrene oxide isomerase (SOI) catalyzes the Meinwald rearrangement of aryl epoxides to carbonyl compounds via a 1,2-trans-shift in a stereospecific manner. A number of cascade biotransformations with SOI-catalyzed epoxide isomerization as a key step have been developed to convert readily available substrates into valuable chiral chemicals. Cascade conversion of terminal or internal alkenes into chiral acids, alcohols or amines was achieved, which involved SOI-catalyzed enantio-retentive isomerization of terminal epoxides via 1,2-H shift, or internal epoxides via 1,2-methyl shift. SOI-involved cascades were also developed to convert racemic epoxides into chiral acids or amines via dynamic kinetic resolution. Additionally, combining SOI-catalyzed isomerization with enantioselective C-C bond forming enzymes enabled the synthesis of chiral amino acids or amino alcohols from racemic epoxides. Finally, integration of SOI-involved cascades with biosynthesis pathways allowed for the direct utilization of renewable substrates for the sustainable synthesis of high-value natural chemicals such as alcohols, acids, and esters.

Enzyme-Catalyzed Meinwald Rearrangement with an Unusual Regioselective and Stereospecific 1,2-Methyl Shift

The Meinwald rearrangement is a synthetically useful reaction but often lacks regioselectivity and stereocontrol. A significant challenge in the Meinwald rearrangement of internal epoxides is the non-regioselective migration of different substituents to give a mixture of products. Herein, an enzyme-catalyzed regioselective and stereospecific 1,2-methyl shift in the Meinwald rearrangement of internal epoxides is reported. Styrene oxide isomerase (SOI) catalyzed the unique isomerization of internal epoxides through 1,2-methyl shift without 1,2-hydride shift to give the corresponding aldehydes and a cyclic ketone as the sole product. SOI-catalyzed isomerization showed high stereospecificity, fully retaining the stereoconfiguration. The synthetic utility of this enzymatic Meinwald rearrangement was demonstrated by its incorporation into three new types of enantioselective cascades, to convert trans-β-methyl styrenes into the corresponding R-configured alcohols, acids, or amines in high ee and yield.

Selective Photocatalyst for styrene epoxidation with atmospheric O2 using covalent organic frameworks

Fe@POG-OH was synthetized and used to photo-catalyze styrene epoxidation with high selectivity and high conversion at room temperature. O2˙− plays crucial roles in the effective and selective oxidation of styrene to styrene oxide.

Visible light-mediated synthesis of α-alkoxy/hydroxy diarylacetaldehydes from terminal alkynes

A visible light-mediated approach enabling the use of alcohols as nucleophiles in a one-step synthesis of α-alkoxy/hydroxy diarylacetaldehydes is reported.

Substrate–Solvent Crosstalk—Effects on Reaction Kinetics and Product Selectivity in Olefin Oxidation Catalysis

In this work, we explored how solvents can affect olefin oxidation reactions catalyzed by MCM-bpy-Mo catalysts and whether their control can be made with those players. The results of this study demonstrated that polar and apolar aprotic solvents modulated the reactions in different ways. Experimental data showed that acetonitrile (aprotic polar) could largely hinder the reaction rate, whereas toluene (aprotic apolar) did not. In both cases, product selectivity at isoconversion was not affected. Further insights were obtained by means of neutron diffraction experiments, which confirmed the kinetic data and allowed for the proposal of a model based on substrate–solvent crosstalk by means of hydrogen bonding. In addition, the model was also validated in the ring-opening reaction (overoxidation) of styrene oxide to benzaldehyde, which progressed when toluene was the solvent (reaching 31% styrene oxide conversion) but was strongly hindered when acetonitrile was used instead (reaching only 7% conversion) due to the establishment of H-bonds in the latter. Although this model was confirmed and validated for olefin oxidation reactions, it can be envisaged that it may also be applied to other catalytic reaction systems where reaction control is critical, thereby widening its use.

Highly efficient Co single-atom catalyst for epoxidation of plant oils

Epoxidation of bio-derived plant oils is a sustainable route to manufacturing plasticizers, additives in lubricants, and other chemicals. The traditional synthetic approaches suffer from the employment of corrosive mineral acid or expensive peroxides (e.g., H₂O₂). In this work, we report the epoxidation of plant oils using O₂ as the terminal oxidant catalyzed by Co-N-C/SiO₂ single-atom catalyst. The single-atom dispersion of cobalt is confirmed by high-angle annular dark field-STEM and x-ray absorption fine structure techniques. In the epoxidation of methyl oleate under mild reaction conditions (35 °C, 0.1 MPa O₂), 99% selectivity to the desired product is achieved at full conversion. Even for crude oils, Co-N-C/SiO₂ is also effective and good yields of the corresponding epoxides are obtained. In addition, the catalyst is easily recovered and can be reused five times without obvious decay in catalytic activity/selectivity. A superoxide radical involved reaction mechanism is proposed on the basis of kinetic study and EPR experiment.

Oxidative Rearrangement of Stilbenes to 2,2-Diaryl-2-hydroxyacetaldehydes

A one-pot oxone-mediated/iodine-catalyzed oxidative rearrangement of stilbenes leading to 2,2-diaryl-2-hydroxyacetaldehydes is described. Control experiments revealed that a 2,2-diarylacetaldehyde was initially formed that undergoes subsequent α-hydroxylation. The resulting α-hydroxyaldehydes have been subjected to a one-pot Still-Gennari olefination followed by cyclization, leading to 5,5-diaryl-γ-butenolides.

Controllable Preparation of Monodisperse Mesoporous Silica from Microspheres to Microcapsules and Catalytic Loading of Au Nanoparticles

A unique structural transition from pomegranate-like monodisperse mesoporous silica microspheres (M-MSMs) with tunable mesopores to mesoporous silica microcapsules has been reported. The unique evolution occurred together with varying the cross-linking degrees (CLDs) of templates. Herein, using monodisperse sulfonated cross-linked polystyrene (S-CLPS) as templates, S-CLPS/SiO₂ composite microspheres were synthesized by the sol-gel method. Subsequently, the templates were removed by calcination to obtain the M-MSMs or microcapsules. The pore sizes of M-MSMs could be tailored from 3.2 to 7.4 nm by facilely varying the CLDs from 0.5 to 20%. Interestingly, mesoporous silica microcapsules were gradually formed when the CLDs were beyond 20%. Meanwhile, the specific surface area also could be adjusted by this strategy without hardly affecting the monodispersity, and the specific surface area increased to 391.9 m²/g. Significantly, Au@M-MSM was prepared by supporting Au nanoparticles (NPs) on M-MSM and used as nanocatalysts to reduce 4-nitrophenol (4-NP). The ultrathin shell and interconnected three-dimensional (3D) porous structure of M-MSMs can increase the mass transfer and protect the Au NPs from leakage, which reveals high recyclability and high conversion (>95%) after 10 regeneration-catalysis cycles. This approach provides a nanotechnology platform for the preparation of mesoporous silica materials with different microstructures, which will have enormous potential in practical applications involving different molecular sizes.

Synthesis of fatty ketoesters by tandem epoxidation–rearrangement with heterogeneous catalysis

Fatty ketoesters are obtained from unsaturated fatty esters in a tandem two-step process with a combination of two heterogeneous catalysts, without intermediate purification and with maximum productivity of the catalysts through recycling and reuse.

Retracted: Synthesis of 2-Arylisoindoline Derivatives Catalyzed by Reusable 1,2,4-Triazole Iridium on Mesoporous Silica through a Cascade Borrowing Hydrogen Strategy

Covalent attachment of a 1,2,4-triazole iridium complex to mesoporous MCM-41 generated a heterogeneous catalyst that was found to be effective in the synthesis of 2-aryl isoindolines, quinolines, cyclic amines, and symmetrical secondary amines through a cascade borrowing hydrogen strategy. Interestingly, the supported heterogeneous iridium catalyst prepared from the 1,2,4-triazole iridium complex and mesoporous MCM-41 exhibited high catalytic activity in the preparation of 2-aryl isoindoline derivatives and symmetrical secondary amines. The catalyst system is highly recyclable for at least five times. Besides the important effect of the triazole, iridium sites grafted on siliceous supports can act as multifunctional catalytic centers and thus greatly enhance the catalytic activity of the catalysts. Furthermore, mechanistic experiments revealed that the reaction is initiated by an initial alcohol dehydrogenation and promoted by an iridium hydride intermediate. Importantly, the direct detection of a diagnostic iridium hydride signal confirmed that the synthesis of 2-aryl isoindolines occurs by a borrowing hydrogen process. This work provides an efficient example of isoindolines synthesis through a borrowing hydrogen strategy.

Role of the Outer Metal of Double Metal Cyanides on the Catalytic Efficiency in Styrene Oxidation

The catalytic efficiency of double metal cyanide (DMC) has been shown to be very effective in heterogeneous catalysis. The catalytic activity of the outer divalent cations (Mn, Co, Ni, and Cu) of a family of hexacyanocobaltates was examined in the oxidation reaction of styrene, as a model molecule, using tert Butyl Hydroperoxide (TBHP, Luperox®) as an oxidizing agent. The most electronegative outer cations showed the best conversions, with 95% for copper, followed by nickel with 85% conversion of the monomer at atmospheric pressure and temperature of 75 °C. The evidence showed that the catalytic activity and selectivity towards oxidized products are strongly linked to the accurate choice of the outer cation in the DMC together with the oxidizing agent.

Multifunctionality in Two Families of Dinuclear Lanthanide(III) Complexes with a Tridentate Schiff-Base Ligand

The employment of N-(2-carboxyphenyl)salicylideneimine in 4f metal chemistry has led to two families of dinuclear complexes depending on the lanthanide(III) used. Representative members exhibit interesting magnetic, optical, and catalytic properties.

Wettability Control of Co-SiO2@Ti-Si Core-Shell Catalyst to Enhance the Oxidation Activity with the In Situ Generated Hydroperoxide

With the aim of utilizing O₂ as an oxidant, cascade reaction strategy was usually employed by first transforming O₂ into the in situ generated hydroperoxide and then oxidized the substrate. To combine the two steps more efficiently to get a higher reaction rate, a series of core-shell catalysts with core and shell having different wettabilities were designed. The catalysts were characterized by transmission electron microscopy, UV-vis spectroscopy, Fourier transform infrared, sessile water contact angle, among other methods. These catalysts were applied in the research of the diphenyl sulfide oxidation by the in situ generated hydroperoxide derived from ethylbenzene oxidation. Through control experiments, the hydrophobic modification in the shell and core will influence different steps of the overall cascade reaction. Further insight into the reaction illustrated that the overall reaction rate was not simply an adduct of the promotion effects from the two steps, which was mainly attributed to the inhibition effect for the co-oxidation of ethylbenzene with diphenyl sulfide. Through the guidance of the relationship, a rationally designed core-shell catalyst with appropriate modifying organic groups showed an enhanced performance of the overall cascade reaction. The rational design of the catalysts would provide a reference for other cascade reactions.

B2pin2-catalyzed oxidative cleavage of a CC double bond with molecular oxygen

B₂pin₂-catalyzed oxidative cleavage of the CC double bond of an olefin with molecular oxygen as the oxidant and oxygen source has been developed.

Controllable synthesis of mesoporous titanosilicates for styrene oxidization using a nanocellulose template strategy

A nanocellulose-template strategy is reported for the controllable synthesis of mesoporous titanosilicates as efficient catalysts for the oxidization of styrene.

An efficient epoxidation of terminal aliphatic alkenes over heterogeneous catalysts: when solvent matters

With a peculiar combination of catalyst/oxidant/solvent, it is possible to obtain good yields and excellent selectivities in the epoxidation of 1-octene.

Studies on sodium polymers based on di(1H-tetrazol-5-yl)methanone oxime

[Na(Hbto)(H₂O)₂·2H₂O]_n (1), [(NH₃OH)₂Na₂(bto)₂(H₂O)₄·H₂O]_n (2) and [(NH₃OH)Na(bto)(H₂O)₂]_n (3), eco-friendly coordination polymers, have been synthesized.