Size-Dependent Reaction Pathways of Low-Temperature CO Oxidation on Au/CeO2 Catalysts

Support effect on Ni-based mono- and bimetallic catalysts in CO2 hydrogenation

Aiming at a comprehensive understanding of support effects on Ni-based bimetallic catalyst for CO2 hydrogenation, spectroscopy (DRIFTS) with CO as a probe molecule and temperature-programmed techniques were used to investigate the impact of different supports (MgO, CeO2, ZrO2) on Ni- and Ni,Fe catalysts. Kinetic parameters revealed that the higher selectivity to methanation for Ni and Ni,Fe supported on the reducible oxides (CeO2, ZrO2) is due to the inhibition of reverse water-gas shift reaction (RWGS) by hydrogen. A promoting effect of Fe on Ni was only observed on MgO-supported catalysts. In situ DRIFTS with CO adsorption showed different electronic properties of Ni sites with partially reduced oxide (i.e. ZrO2 and CeO2). H2-TPR and CO2-TPD confirmed the significant role of metal-support interaction (MSI) in CeO2-supported catalysts for CO2 activation. The MSI between Ni/Ni,Fe and reducible supports are crucial for catalytic performance, ultimately leading to the higher activity and stability in CO2 hydrogenation.

Supported Au single atoms and nanoparticles on MoS2 for highly selective CO2-to-CH3COOH photoreduction

Effectively controlling the selective conversion of CO2 photoreduction to C2 products presents a significant challenge. Here, we develop a heterojunction photocatalyst by controllably implanting Au nanoparticles and single atoms into unsaturated Mo atoms of edge-rich MoS2, denoted as Aun/Au1-CMS. Photoreduction of CO2 results in the production of CH3COOH with a selectivity of 86.4%, which represents a 6.4-fold increase compared to samples lacking single atoms, and the overall selectivity for C2 products is 95.1%. Furthermore, the yield of CH3COOH is 22.4 times higher compared to samples containing single atoms and without nanoparticles. Optical experiments demonstrate that the single atoms domains can effectively capture photoexcited electrons by the Au nanoparticles, or the local electric field generated by the nanoparticles promotes the transfer of photogenerated electrons in MoS2 to Au single atoms, prolonging the relaxation time of photogenerated electrons. Mechanistic investigations reveal that the orbital coupling of Au5d and Mo4d strengthens the oxygen affinity of Mo and carbon affinity of Au. The hybridized orbitals reduce energy splitting levels of CO molecular orbitals, aiding C-C coupling. Moreover, the Mo-Au dual-site stabilize the crucial oxygen-associated intermediate *CH2CO, thereby enhancing the selectivity towards CH3COOH. The cross-scale heterojunctions provide an effective strategy to simultaneously address the kinetical and thermodynamical limitations of CO2-to-CH3COOH conversion.

Mechanisms for Catalytic CO Oxidation on SiAun (n = 1-5) Cluster

Significant progress has been made in understanding the reactivity and catalytic activity of gas-phase and loaded gold clusters for CO oxidation. However, little research has focused on mixed silicon/gold clusters (SiAun) for CO oxidation. In the present work, we performed density function theory (DFT) calculations for a SiAun (n = 1-5) cluster at the CAM-B3LYP/aug-cc-pVDZ-PP level and investigated the effects on the reactivity and catalytic activity of the SiAun cluster for CO oxidation. The calculated results show that the effect is very low for the activation barriers for the formation of OOCO intermediates on SiAu clusters, SiAu3 clusters, and SiAu5 clusters in the catalytic oxidation of CO and the activation energy barriers for the formation of OCO intermediates on OSiAu3, OSiAu4, and OSiAu5. Our calculations show that, compared with the conventional small Au cluster, the incorporation of Si enhances the catalytic performance towards CO oxidation.

Enabling Specific Photocatalytic Methane Oxidation by Controlling Free Radical Type

Selective CH₄ oxidation to CH₃OH or HCHO with O₂ in H₂O under mild conditions provides a desired sustainable pathway for synthesis of commodity chemicals. However, manipulating reaction selectivity while maintaining high productivity remains a huge challenge due to the difficulty in the kinetic control of the formation of a desired oxygenate against its overoxidation. Here, we propose a highly efficient strategy, based on the precise control of the type of as-formed radicals by rational design on photocatalysts, to achieve both high selectivity and high productivity of CH₃OH and HCHO in CH₄ photooxidation for the first time. Through tuning the band structure and the size of active sites (i.e., single atoms or nanoparticles) in our Au/In₂O₃ catalyst, we show alternative formation of two important radicals, ^•OOH and ^•OH, which leads to distinctly different reaction paths to the formation of CH₃OH and HCHO, respectively. This approach gives rise to a remarkable HCHO selectivity and yield of 97.62% and 6.09 mmol g^-1 on In₂O₃-supported Au single atoms (Au₁/In₂O₃) and an exceptional CH₃OH selectivity and yield of 89.42% and 5.95 mmol g^-1 on In₂O₃-supported Au nanoparticles (Au_NPs/In₂O₃), respectively, upon photocatalytic CH₄ oxidation for 3 h at room temperature. This work opens a new avenue toward efficient and selective CH₄ oxidation by delicate design of composite photocatalysts.

Abatement of dichloromethane with high selectivity over defect-rich MOF-derived Ru/TiO2 catalysts

The regulation of oxygen vacancies and Ru species using metal-organic frameworks was synergically adopted in a rational design to upgrade Ru/TiO₂ catalysts, which are highly active for the catalytic oxidation of dichloromethane (DCM) with less undesired byproducts. In this work, Ru/M-TiO₂ and Ru/N-TiO₂ catalysts were synthesized by the pyrolysis of MIL-125 and NH₂-MIL-125 incorporated with Ru, the existence of Ru nanoclusters and nanoparticles was detected by XAFS, respectively, and the catalytic performance was analyzed comprehensively. Complete oxidation of DCM was obtained at ∼290 °C over Ru/M-TiO₂ and Ru/N-TiO₂ catalysts, while Ru/N-TiO₂ showed quite less monochloromethane (MCM) and higher CO₂ yields, and better dechlorination capacity in oxidation. The distinction comes down to that the easier desorption of chlorine could be achieved over Ru⁴⁺ which act as the main activated adsorption sites for DCM in Ru/N-TiO₂, compared to oxygen vacancies that serve as the main dissociation sites in Ru/M-TiO₂. Additionally, Ru/N-TiO₂ exhibited superior stability and excellent resilience in moisture. An in situ DRIFTS experiment further indicated the different DCM catalytic degradation process as well as the reaction mechanism over the as-prepared catalysts.

Tuning Particle Sizes and Active Sites of Ni/CeO2 Catalysts and Their Influence on Maleic Anhydride Hydrogenation

Supported metal catalysts are widely used in industrial processes, and the particle size of the active metal plays a key role in determining the catalytic activity. Herein, CeO₂-supported Ni catalysts with different Ni loading and particle size were prepared by the impregnation method, and the hydrogenation performance of maleic anhydride (MA) over the Ni/CeO₂ catalysts was investigated deeply. It was found that changes in Ni loading causes changes in metal particle size and active sites, which significantly affected the conversion and selectivity of MAH reaction. The conversion of MA reached the maximum at about 17.5 Ni loading compared with other contents of Ni loading because of its proper particle size and active sites. In addition, the effects of Ni grain size, surface oxygen vacancy, and Ni–CeO₂ interaction on MAH were investigated in detail, and the possible mechanism for MAH over Ni/CeO₂ catalysts was deduced. This work greatly deepens the fundamental understanding of Ni loading and size regimes over Ni/CeO₂ catalysts for the hydrogenation of MA and provides a theoretical and experimental basis for the preparation of high-activity catalysts for MAH.

Enhanced catalytic performance of atomically dispersed Pd on Pr-doped CeO2 nanorod in CO oxidation

Single-atom noble metal catalysts have been widely studied for catalytic oxidation of CO. Regulating the coordination environment of single metal atom site is an effective strategy to improve the intrinsic catalytic activity of single atom catalyst. In this work, single atom Pd catalyst supported on Pr-doped CeO₂ nanorods was prepared, and the performance and nature of Pr-coordinated atomic Pd site in CO catalytic oxidation are systematically investigated. The structure characterization using AC-HAADF-STEM, EXAFS, XRD and Raman spectroscopy demonstrate the formation of single atom Pd site and abundant surface oxygen vacancies on the surface of Pr-doped CeO₂ nanorod. With the combination of the XPS characterization and DFT calculations, the oxidation state of Pd on Pr-doped CeO₂ nanorod is determined lower than that on CeO₂ nanorod. The turnover frequency of CO oxidation is markedly increased from 8.4 × 10^-3 to 31.9 × 10^-3 s with Pr-doping at 130 ºC and GHSV of 70,000 h^-1. Combined with kinetic studies, DRIFT and DFT calculations, the doped-Pr atoms reduced the formation energy of oxygen vacancies and generate more oxygen vacancies around the atomically dispersed Pd sites on the surface of cerium oxide, which reduces the dissociation energy of oxygen, thereby accelerating the reaction rate of CO oxidation.

Influence of the Support on Propene Oxidation over Gold Catalysts

The epoxidation of propene without forming a substantial amount of byproducts is one of the holy grails of catalysis. Supported Cu, Ag and Au catalysts are studied for this reaction and the activity of the supported metals is generally well understood. On the contrary, limited information is available on the influence of the support on the epoxide selectivity. The reaction of propene with equal amounts of hydrogen and oxygen was tested over gold nanoparticles deposited onto CeO2, TiO2, WO3, γ-Al2O3, SiO2, TiO2-SiO2 and titanosilicate-1. Several metal oxide supports caused further conversion of the synthesized propene oxide. Strongly acidic supports, such as WO3 and titanosilicate-1, catalyzed the isomerization of propene oxide towards propanal and acetone. Key factors for achieving high PO selectivity are having inert or neutralized surface sites, a low specific surface and/or a low density of surface -OH groups. This work provides insights and practical guidelines to which metal oxide support properties lead to which products in the reaction of propene in the presence of oxygen and hydrogen over supported gold catalysts.

Confinement of nano-gold in 3D hierarchically structured gadolinium-doped ceria mesocrystal: synergistic effect of chemical composition and structural hierarchy in CO and propane oxidation

Gadolinium-doped ceria hierarchical gold catalyst shows four-fold TOF increase compared to undoped non-hierarchical system, proving the synergistic effect of doping and structural hierarchy in propane oxidation.

Boosting the catalytic performance of single-atom catalysts by tuning surface lattice expanding confinement

We report that Pt single atoms embedded on a disordered TiO2 surface have a weaker affinity for CO than those supported on a perfect TiO2 surface, thus generating much better CO oxidation activity.

Fundamental Aspects of Ceria Supported Au Catalysts Probed by In Situ/Operando Spectroscopy and TAP Reactor Studies

The discovery of the activity of dispersed gold nanoparticles three decades ago paved the way for a new era in catalysis. The unusual behavior of these catalysts sparked many questions about their working mechanism. In particular, Au/CeO₂ proved to be an efficient catalyst in several reactions such as CO oxidation, water gas shift, and CO₂ reduction. Here, by employing findings from operando X‐ray absorption spectroscopy at the near and extended Au and Ce L_III energy edges, we focus on the fundamental aspects of highly active Au/CeO₂ catalysts, mainly in the CO oxidation for understanding their complex structure‐reactivity relationship. These results were combined with findings from in situ diffuse reflectance FTIR and Raman spectroscopy, highlighting the changes of adlayer and ceria defects. For a comprehensive understanding, the spectroscopic findings will be supplemented by results of the dynamics of O₂ activation obtained from Temporal Analysis of Products (TAP). Merging these results illuminates the complex relationship among the oxidation state, size of the Au nanoparticles, the redox properties of CeO₂ support, and the dynamics of O₂ activation.

Biomimetic Au/CeO2 Catalysts Decorated with Hemin or Ferrous Phthalocyanine for Improved CO Oxidation via Local Synergistic Effects

Biomimetic catalysts have drawn broad research interest owing to both high specificity and excellent catalytic activity. Herein, we report a series of biomimetic catalysts by the integration of biomolecules (hemin or ferrous phthalocyanine) onto well-defined Au/CeO₂, which leads to the high-performance CO oxidation catalysts. Strong electronic interactions among the biomolecule, Au, and CeO₂ were confirmed, and the CO uptake over hemin-Au/CeO₂ was roughly about 8 times greater than Au/CeO₂. Based on the Au/CeO₂(111) and hemin-Au/CeO₂(111) models, the density functional theory calculations reveal the mechanisms of the biomolecules-assisted catalysis process. The theoretical prediction suggests that CO and O₂ molecules preferentially bind to the surface of noncontacting Au atoms (low-coordinated sites) rather than the biomolecule sites, and the accelerating oxidation of Au-bound CO occurs via either the Langmuir-Hinshelwood mechanism or the Mars-van Krevelen mechanism. Accordingly, the findings provide useful insights into developing biomimetic catalysts with low cost and high activity.

Ultra-Fine CeO2 Particles Triggered Strong Interaction with LaFeO3 Framework for Total and Preferential CO Oxidation

Interactions between the active components with the support are one of the fundamentally factors in determining the catalytic performance of a catalyst. In contrast to the comprehensive understanding on the strong metal-support interactions (SMSI) in metal-based catalysts, it remains unclear for the interactions among different oxides in mixed oxide catalysts due to its complexity. In this study, we investigated the interaction between CeO₂ and LaFeO₃, the two important oxygen storage materials in catalysis area, by tuning the sizes of CeO₂ particles and highlight a two-fold effect of the strong oxide-oxide interaction in determining the catalytic activity and selectivity for preferential CO oxidation in hydrogen feeds. It is found that the anchoring of ultra-fine CeO₂ particles (<2 nm) at the framework of three-dimensional-ordered macroporous LaFeO₃ surface results in a strong interaction between the two oxides that induces the formation of abundant uncoordinated cations and oxygen vacancy at the interface, contributing to the improved oxygen mobility and catalytic activity for CO oxidation. Hydrogen spillover, which is an important evidence of the strong metal-support interactions in precious metal catalysts supported by reducible oxides, is also observed in the H₂ reduction process of CeO₂/LaFeO₃ catalyst due to the presence of ultra-fine CeO₂ particles (<2 nm). However, the strong interaction also results in the formation of surface hydroxyl groups, which when combined with the hydrogen spillover reduces the selectivity for preferential CO oxidation. This discovery demonstrates that in hybrid oxide-based catalysts, tuning the interaction among different components is essential for balancing the catalytic activity and selectivity.

Selective immobilization of single-atom Au on cerium dioxide for low-temperature removal of C1 gaseous contaminants

Selective immobilization of single-atom Au on the specific facets of CeO₂ has been successfully performed by redox etching precipitation (REP), which makes it possible to clearly refine the interfacial effect of multiple-facet support on single atom. With systemic characterizations, it is found that single-atom Au is apt to lie on nonpolar facets of CeO₂ (111) and (110) rather than polar facet of CeO₂ (100). The modification of morphology-dependent properties is attributed to the different interaction between Au atom and each CeO₂ interface. Because of synergy between Au and CeO₂, more oxygen vacancies and more active oxygen species are generated; meanwhile, the interfacial effect stabilizes the charged Au species which serves as active site. Therefore, the performance in catalytic oxidation of HCHO and CO on CeO₂ is facilitated by loading Au. Among them, CeO₂ rod-supported Au as an optimal catalyst exhibits a remarkable activity and stability. With in-situ characterization, the reaction mechanisms for HCHO and CO oxidation over Au/r-CeO₂ are studied. Meanwhile, it is proved that REP strategy is also valid to obviously promote catalytic performance whenever commercial CeO₂ is used or Au is replaced with Ag, so the improvement of recently applied catalyst with REP process is promising.

Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO₂ hydrogenation, C–C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

Selective aerobic oxidation of cyclic ethers to lactones over Au/CeO2 without any additives

Selective oxidation of ethers to lactones with O₂ as a benign oxidant using Au/CeO₂ as the catalyst has been developed. The oxygen vacancies and Au⁰ species on the surface of CeO₂ contribute to the activation of O₂. The excellent selectivity of lactones is due to the adsorption of ethers and activation of the C(sp³)-H bond on Au/CeO₂.

Ligand-protected atomically precise gold nanoclusters as model catalysts for oxidation reactions

This feature article provides a systematic overview and outlook on the oxidation reactions catalyzed by gold nanoclusters.

Atomic-Scale Observation of Bimetallic Au-CuOx Nanoparticles and Their Interfaces for Activation of CO Molecules

Supported gold nanoparticles with sizes below 5 nm display attractive catalytic activities for heterogeneous reactions, particularly those promoted by secondary metal (e.g., Cu) because of the well-defined synergy between metal compositions. However, the specific atomic structure at interfaces is less interpreted systematically. In this work, various bimetallic Au-CuO_x catalysts with specific surface structures were synthesized and explored by aberration-corrected scanning transmission electron microscopy (AC-STEM), temperature-programmed experiments and in situ DRIFT experiments. Results suggest that the atomic structure and interfaces between gold and CuO_x are determined by the nucleation behaviors of the nanoparticles and result in subsequently the distinctive ability for CO activation. Bimetallic CuO*/Au sample formatted by gold particles surrounded with CuO_x nanoclusters have rough surface with prominently exposed low-coordinated Au step defects. Whereas the bimetallic Au@CuO sample formatted by copper precursor in the presence of gold nanoparticles have core-shell structure with relatively smooth surface. The former structure of CuO*/Au displays much accelerated properties for CO adsorption and activation with 90% CO converted to CO₂ at 90 °C and nice stability with time on stream. The results clearly determine from atomic scale the significance of exposed gold step sites and intrinsic formation of defected surface by different nucleation. The above properties are directly responsible for the induced variation in chemical composition and the catalytic activity.

Chemical and Electronic Changes of the CeO2 Support during CO Oxidation on Au/CeO2 Catalysts: Time-Resolved Operando XAS at the Ce LIII Edge

While being highly active for the CO oxidation reaction already at low temperatures, Au/CeO2 catalysts suffer from continuous deactivation with time on stream, with the activity and deactivation depending on the initial catalyst activation procedure. In previous X-ray absorption measurements at the Au LIII edge, which focused on changes in the electronic and geometric changes of Au, we found a modest increase of the Au particle size during reaction, with the Au nanoparticles (NPs) present in a dominantly metallic state during reaction, regardless of the pretreatment. Here we aim at expanding on these insights by examining the changes in electronic and chemical composition of the CeO2 support induced by different pretreatment procedures and during subsequent CO oxidation at 80 °C, by following changes at the Ce LIII near edge region in time-resolved operando X-ray absorption measurements. The results indicate a strong dependence of the initial concentration of Ce3+ ions on the pretreatment, while during subsequent reaction this rapidly approaches a steady-state value which depends on the oxidative/reductive character of the reaction gas mixture, but is largely independent of the pretreatment. These results are discussed and related to earlier finding on the electronic properties of Au nanoparticles under identical reaction conditions.

CeO2@SiO2 Core-Shell Nanostructure-Supported CuO as High-Temperature-Tolerant Catalysts for CO Oxidation

Supported CuO-CeO₂ catalysts have been extensively studied for their outstanding catalytic activity in CO oxidation. Unfortunately, they are prone to sintering and deactivation when exposed to high-temperature automotive exhausts. Herein, taking advantage of the heat-resistant SiO₂ microspheres, we fabricated a series of core-shell-structured yCuO- xCeO₂@SiO₂ ( x is the weight ratio of CeO₂-SiO₂ and y is the weight ratio of Cu-(CeO₂@SiO₂)) composite catalysts. All the small CeO₂ particles were bound to the SiO₂ spheres, forming an xCeO₂@SiO₂ structure, on the surface of which a certain amount of CuO was well-dispersed. The 5CuO-50CeO₂@SiO₂ catalyst exhibited good activity, with the full conversion of CO achieved at around 130 °C, and no obvious deactivation was observed in the stability test. Importantly, the interaction between CuO and CeO₂@SiO₂ enhanced its durability at high temperatures. Even at 800 °C and with a space velocity of 800 000 mL·g_cat^-1·h^-1, CO conversion could be maintained at 90%, which is prospectively applied in a real CO elimination system. The result of the temperature-programmed reduction in hydrogen demonstrated that this special core-shell-structured 5CuO-50CeO₂@SiO₂ catalyst improved the reduction ability of the CuO species. In situ diffuse reflectance infrared Fourier transform spectroscopy measurements further confirmed that CO molecules preferred to be adsorbed on Cu(I) species to form reactive CO-Cu(I) that enhanced the reactivity of the 5CuO-50CeO₂@SiO₂ catalyst.

Direct Identification of Active Surface Species for the Water-Gas Shift Reaction on a Gold-Ceria Catalyst

The crucial role of the metal-oxide interface in the catalysts of the water-gas shift (WGS) reaction has been recognized, while the precise illustration of the intrinsic reaction at the interfacial site has scarcely been presented. Here, two kinds of gold-ceria catalysts with totally distinct gold species, <2 nm clusters and 3 to 4 nm particles, were synthesized as catalysts for the WGS reaction. We found that the gold cluster catalyst exhibited a superiority in reactivity compared to gold nanoparticles. With the aid of comprehensive in situ characterization techniques, the bridged -OH groups that formed on the surface oxygen vacancies of the ceria support are directly determined to be the sole active configuration among various surface hydroxyls in the gold-ceria catalysts. The isotopic tracing results further proved that the reaction between bridged surface -OH groups and CO molecules adsorbed on interfacial Au atoms contributes dominantly to the WGS reactivity. Thus, the abundant interfacial sites in gold clusters on the ceria surface induced superior reactivity compared to that of supported gold nanoparticles in catalyzing the WGS reaction. On the basis of direct and solid experimental evidence, we have obtained a very clear image of the surface reaction for the WGS reaction catalyzed by the gold-ceria catalyst.